Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube

Size: px
Start display at page:

Download "Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube"

Transcription

1

2 Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and assembly instructions. This product is not a toy and intended for ages 4 and up. Adult supervision is required for ages under 8 years old. Contains small parts, keep out of reach of children years and younger. DO NOT operate this model in the rain, on public streets, near crowds, airports or anywhere where it will be deemed a hazard to anyone or anything. Do not run the model into yourself, others or animals while operating or possible injury may occur. Serious accidents, personal injury and property damage may occur. Electronic Speed Controller Instructions Use proper rechargeable batteries intended for RC applications only. Follow manufacturers guidelines for charging batteries properly. Motor and speed control can become very hot after use, please handle with care. Be aware of all moving parts of the vehicle so no injuries occur. Always unplug the battery after use. DO NOT leave your car unattended with the battery plugged in and do not store the battery in the vehicle. Always store batteries and models in a cool dry place. Operating Instructions: Place the model on a car stand or something that holds all 4 wheels off the ground. Turn on the ESC. Right after powering up the ESC will denote a series of beeps denoting the neutral setting of the transmitter. A second beeping sound denotes the success of neutral setup. If you do not hear the second set of beeps power the esc down, then the transmitter and begin again. Adjust & make sure the Throttle forward direction coincides with the ESC forward direction. With the wheels of the model off the ground safely push the throttle trigger forward to start motor running, push the throttle trigger backwards & hold it. If the system keeps braking, the throttle forward direction coincides with the ESC forward direction. Otherwise, if the system only has brief braking then the motor begins reverse operation, the throttle and ESC forward directions do not coincide with each other. In this case you can adjust the throttle reversing switch on the transmitter. First change the switch for the throttle direction then turn the ESCoff and back on again to reset. If the motor is operating in the wrong direction compared to the throttle inputs switch any two motor wires while the ESC is turned off. Precautions Do not reverse the battery wire connections! Reversing the battery polarity will permanently damage the ESC. Once the battery pack is connected, handle the model with extreme care, making sure you are clear of all rotating parts. Be sure to turn off the ESC power before turning off the transmitter. Connect the battery pack just before driving and disconnect it immediately after your done. Never leave battery packs plugged into your model during storage; batteries should not be stored in your model ever. Always make sure you are connecting the ESC to a proper power source that has the correct voltage & polarity. Input voltage: 7.V-8.4V(Ni-cd & Ni-MH) 7.4V(Li-po) only. Any higher voltage will cause permanent damage and will void the warranty! Incorrect voltages or reversed polarity will damage the ESC. Avoid touching ESC heat sink or motor casing right after operation due to high temperatures and the risk of burning your hands. Water and electronics don t mix! Never let water or any other debris on or inside of the ESC or motor. Any issue related to ESC failure due to water voids the warranty. Always maintain wiring away from rotating parts that can cause damage or wear wiring over time. Cover any exposed wires using heat shrink. Gear Selection It is very important not to overheat the ESC or motor. When adjusting gear ratios always test both the ESC and motor temperature after running for - minutes. It is very important not to heat the motor or speed control over 80 degrees Fahrenheit. Doing so will decrease performance and could ruin your electronics. Forward operation includes brakes while throttle is at more than 5% input. Slower than 5% will begin reverse operation. Reverse will also begin from a standstill. Trouble-shooting Steering Channel Works But Motor Will Not Run Check input plug wiring connections at ESC and receiver. Check motor connections. Possible internal motor damage. Check vehicle s drive train for free operation. Possible ESC thermal shutdown Check gear ratio & free operation of drive train for possible overheating/esc is being severely overheated allow system to cool & return throttle to neutral position to regain motor control. Possible receiver failure Check operation with a different receiver. Possible internal damage Refer to Service Procedures. Receiver Glitches/Throttle Stutters During Acceleration Receiver or antenna too close to ESC, power wires, battery, or motor. Bad connections Check wiring & connectors. Low voltage to receiver Try Glitch Buster capacitor on receiver. External Power Capacitor damaged/not installed Replace Power Capacitor. Battery pack damaged or weak Try a different battery pack. Motor s magnet has weakened or overheated Replace rotor. Motor and Steering Servo Do Not Work Check wires, receiver signal harness wiring & color sequence, radio system, crystals, battery/motor connectors, & battery pack. Power wires too close to signal wires Do not bundle power & signal wires together. Possible receiver failure Check operation with a different receiver. Possible internal damage Refer to Service Procedures. Brushless Motor Runs Backwards Switch any two motor wires while the ESC is turned off. Speed Control Runs Excessively Hot Gear ratio too low Increase gear ratio (see GEAR SELECTION ). Model Runs Slowly/Slow Acceleration Gear ratio too high Reduce gear ratio (see GEAR SELECTION ). Check battery & connectors Try another battery; replace connectors/battery if needed. Incorrect transmitter/esc adjustment Refer to Step 4. External Power Capacitor damaged/not installed Replace Power Capacitor. Needle Nose Pliers Awl RCE00 HD Grease Thread Lock RCE60 Fusion Tire Glue RCE004 Super Diff Lube RCE705 Body Reamer Wire Cutters RCE7045 Body Scissors RCE005 Black Grease Hex Wrench Box Wrench RCE708 Hobby Knife

3 Battery Battery Charger (Not Included) Motor Install Transmitter Batteries Connect Battery to ESC Switch on Transmitter First Switch on ESC Second Note: When done driving Turn Off the ESC First and the Transmitter Second Servo Receiver Electronic Speed Controller / Switch GLG0.4GHz Control Panel Steering Wheel Throttle Trigger 4 Battery Compartment 5 Charging Jack 6 Sterring Servo Reverse 7 Power LED 8 Steering Trim 9 Bind Button 0 Throttle Servo Reverse Battery Voltage Steering Dual Rate Power Switch 4 Throttle Trim 4

4 Front Suspension T0056 T0056 T004 T0008 T0056. E-ring T0056 T007 4 T0056 T0056 x4.5 Hinge pin front inner T0056 T004 T0056 L R Front Suspension T0059 T0059 T005 T047 4 T008 Mx5 Screw 4 5 T006 T0059 Ball stud - long T008 Assemble in the specified order L R Assemble left and right sides the same way

5 Buffer T T0080 T00 9 T004 T004 T T06 T004 T T E-ring T0080 T00 6 T0080 x6x.5 Ball Bearing 4.0mm 4 T004 T06 Ball stud - silvery T Buffer T0044 T x5.4 Block Carrier T0044 Mx0 Screw T0060 T0044 T0060 T0060 Ball stud - short T0044 x7x0.8 Washer T0044 T0044 T004 Assemble in the specified order

6 5 Front Suspension T008(x0) T008(x0) T008(x8) 5 T047 T000 T008 Mx8 Screw T008 Mx0 Screw 6 T008(x0) T047 Mx5 T008(x0) T047 Mx5 Screw 6 Front Suspension <Right> T0054. E-ring 8 T E-ring T0054 x7.5 Hinge pin front outer 4 T0060 Ball stud-short 4 T004 x9.8 Shaft T0079 5x0x4 Ball bearing 4 T0054 T00 T004 T004 4 T0060 T00 T T004 L R T <Left> T T0054 T0079 T0054 T T0079 T004 Assemble in the specified order L R Assemble left and right sides the same way

7 7 Front Suspension T009 approx.8mm Front Upper(Right) x : T009 approx.8mm Front Upper (Left) x : T mm Ball End(Long) 8 T009 x54 Turnbuckle T009 approx.4mm Steering Tip x : 4 8 Front Suspension 9 Front Suspension T008(Mx) T07 T008(Mx) T07 T008(Mx0) T09 T008 Mx Screw T008 Mx0 Screw 4 T07 Upper Shock Bushing Assemble as many times as specified x : Ture-to -scale diagram 4

8 0 Differential T054 8T Gear T054 5.xx0. T054 x8.8 T x.6 T054 4T Gear T057 Diff Gear Shaft T0078 0x5x4 Ball Bearing T05 5T Diff Gear T054 x8.8 Pin T x.6 O-ring T0078 0x5x4 T054 5.xx0. Washer T055 Gear Differential Outdrives Differential T054 8T Gear T05 M.5x8 T054 x8.8 T0078 0x5x4 Ball Bearing T054 5.xx0. T x.6 T054 x8.8 Pin T05 Gear Differential Seal T x.6 O-ring 000# T054 5.xx0. Washer T05 5T Diff Gear Cover T055 Gear Differential Outdrives High grip: Suggest using 500#-000# differential oil; Low grip: Suggest using 500#-700# differential oil. T05 M.5x8 Screw 4 T0078 0x5x4 5

9 Transmission T0079 5x0x4 T004 T050 Gear Differential Case-R T005 0T T005 T0079 5x0x4 TS0 8T T0079 5x0x4 T0079 5x0x4 Ball bearing 4 T005 5x6.8 Idler gear shaft T004 5x8x6.7 Top shaft spacer T050 Gear Differential Case-L Motor mounts Screw Cement T008 x5 T008 Mx Screw T008 Mx5 Screw T008 x 4 T006 Apply grease Screw Cement Apply threadlocker(screw cement) 6

10 4 Main Gear T0084 M4 Flanged Nylon Nut T008 T04 T09 T008 T04 approx.8mm T0040 T Rear Damper Tower T00 T008(Mx) T008(Mx0) T008(Mx) T008 Mx0 Screw 4 T07 T008 T008 Mx Screw T07 T07 Upper Shock Bushing 7

11 6 Rear Bulkhead T008 T008 T008 T0059 T0059 Ball stud - long T008 Mx0 Screw 4 7 Rear Chassis T004 T05 T008 Mx8 Screw T008 8

12 8 Rear Suspension T004 T0055 x48 Hinge pin Rear inner T005 T008 Mx8 Screw T008 T0055 L R 9 Rear Suspension T008 Mx0 Screw 4 T008 9 L R Assemble left and right sides the same way

13 0 Rear Transmission T008 T008 Mx0 Screw T008 Mx8 Screw T008 Rear Shock Tower & Rear Fender T008(x0) T008 Mx8 Screw 5 T008 Mx0 Screw 4 T008(x8) 4 T006 T008(x8) Screws which were semi tightened in P9 8 8 Assemble in the specified order 0

14 Rear Suspension L R <Left> <Right> T05 T00 T0079 T0060 T0060 Ball stud - short T004 x9.8 Shaft T0079 5x0x4 Ball bearing T0079 T004 T004 4 Rear Suspension L R T0057 T00 T0057. E-ring 4 T0057 T0057 T00.x6x Plastic Washer T0057 x0.5 Hinge pin Rear outer L R Assemble left and right sides the same way Apply grease

15 4 Rear Suspension T mm Ball End(Long) approx 5mm Right Upper x : T009 x54 Turnbuckle 4 T009 T009 T009 5 Rear Suspension 6 Main Chassis T008 Mx8 Screw T008(x0) T008 Mx0 Screw T008 T008 T008 T008(x0) T008 T008(x8) x Assemble as many times as specified : Ture-to -scale diagram

16 7 Shock Absorber Front x Rear x T08 / T09. E-ring 8 Put a little oil T0067 T x.5 Shock Piston 4 T0069.8x.9 O-ring 8 T08 Put a little oil T0068 T0066 T0069 T0069(.8x.9) T0069(xmm) T0069(.8x.9) T0066 T09 T0068 T0069 T0069(.8x.9) T0069(xmm) T0069(.8x.9) T0067 T0069.xmm Plastic Washer 4 T08 T0066(Short) T09 T0067(Long) T0066 & T0067 8x O-ring 4 T08(Short) T09(Long) T Ball End 4 T07 T07 T07 5.8X6 Shock End Eyelet 4 T04 T04 8 Shock Absorber 00# T0066 / T0067 Put the oil for Front(Short) for Front(Short) for Rear(Long) for Rear(Long) F R x F R x x Assemble as many times as specified Assemble in the specified order F R Assemble front and rear sides the same way

17 9 Shock Absorber Front x T040 Short for adjusting the spring tension T040 Compress the spring and install T0066 Long T04 T0067 T040 mm adjuster ring T007(Short) 4 T04 T007(Long) Rear x 0 Front Suspension L R T0084 Short T008 T0084 M Nylon Nut T008 Mx5 Screw x Assemble as many times as specified L Assemble in the specified order R Assemble left and rear sides the same way 4

18 Rear Suspension T0084 Long T008 T0084 M Nylon Nut T008 Mx5 Screw L R Motor T0005 Motor 5 T008 Mx8 Screw T008 Mx5 Screw T008 T008 T04 T008 T008 x7x0.8 Washer T04 Mx Screw 4 5 L R Assemble left and rear sides the same way Assemble in the specified order

19 Steering Servo Select for your servo T000 T008 T008 T06 T008 T008 Steering Servo-H(4T) Steering Servo-S(T) T008(.6x8) T007(5T) T008 4 Sanwa servo SANWA T008 T005 X Steering Servo T Ball End(Short) T008 x7x0.8 Washer 4 T06 Ball stud - silvery T008 T000 Mx0 Screw T008 Mx8 Screw 4 T008 M.6x8 Screw T008 Mx8 Screw T005.5 Servo spacer 4 Radio T06 Receiver Box T0087 T008 Mx8 Screw Receiver T0087 Double-sided Tape Electronic speed controller T008 Mx8 Assemble in the specified order X Must be purchased separately 6

20 5 Battery If using loose battery cells Please put the battery panel conversely T0086 T0 T0086 T0 X Battery X Battery T0086 Small clip 6 Wheels Front x T0075 Rear x T0074 T0075(Sponge) T0074(Sponge) T0 Glue T0 Glue 4 After fitting wheels to tyres,apply instant glue as shown 7 x Assemble as many times as specified Assemble in the specified order X Must be purchased separately

21 7 Body Mounting 6mm 6mm T Body Mounting T0086 Small clip 5 T00 T0084 M4 Flanged Nylon Nut 4 T0086 T008 T08 x T deg - deg T0084 x Assemble as many times as specified Drill holes with the specified diameter 6mm Cut off shaded portion 8

22 Exploded View T0084 T007 T0056 T008 T09 T008 T006 T008 T0075 T0005 T050 T07 T005 T0056 T008 T0084 T0066 T007 T0054 T09 T05 T008 T005 T006 T050 T0069 T0066 T0068 T08 T008 T008 T008 T008 T0087 T008 T008 T000 T007 T0075 T008 T06 T0066 T0066 T040 T008 T005 T0079 T008 T04 TS0 T0066 T055 T0078 T07 T0080 T004 T06 T00 T08 T007 T0060 T004 T07 T04 T004 T0080 T00 T0079 T004 T0079 T0044 T00 T0080 T0044 T008 T04 T004 T008 T0079 T04 T0005 T0084 T0040 T047 T05 T056 T05 T054 T057 T054 T056 T0078 T055 T008 T008 T0059 T0060 T009 T004 T009 T0056 T0084 T00 T0054 T0054 T0060 T009 T004 T004 T0056 T047 T0 T00 T0086 T008 T00 T0087 T06 T0086 T008 T008 T008 T008 T008 T008 T008 T0055 T008 T009 T05 T006 T004 T008 T0060 T00 T0084 T04 T007 T09 T0068 T09 T004 T0079 T009 T004 T0057 T0067 T007 T0067 T0084 T0 T05 T009 T0084 T005 T0057 T0074 T0069 T040 T07 T0055 T008 T008 T0087 T0059 T008 T0059 T008 T008 T008 T000 T008 T0086 T008 T008 T0 T008 T008 T008 T0067 T07 T008 9

23 BUGGY PARTS LIST T047 Front brace mount pcs pcs T050 T05 4pcs M.5x8 Screw pcs pcs Mx5 pcs Front chassis plate pcs Gear Differential Case 5T Diff Gear Cover pcs 5T Diff Gear pcs 4.8x.6 O-ring T05 T05 T054 T055 Rear Chassis Plate (Gear Diff) pcs Gear Differential Seal pcs 4T/8T Gear Set Gear Differential Outdrives pcs T056 T057 T0880 T x.6 Gear Diff O-Ring 4pcs Gear Diff Shaft pcs M.5x8 Screw 8pcs 0x5x4 Ball bearing-metal cover 6pcs T0079 T0080 T06 T00 5x0x4 Ball bearing-metal cover 6pcs x6x.5 Ball bearing-metal cover 4pcs pcs Receiver Box PCS Rear Wing-Buggy T0076 T09 TS0 T0005 PCS Gear Cover Button PCS Stock Buggy Body Lexan-Clear PCS 80T Spur Gear PCS 8T Idler Gear Aluminum PCS Gear Cover PCS T000 T00 T00 T00 Steering block-l PCS.x6x Plastic Washer Main Chassis plate PCS C-type holder L PCS C-type holder R PCS Steering block-r PCS Rear hub carriers-l PCS Rear hub carriers-r PCS

24 BUGGY PARTS LIST T004 T005 T004 T005 PCS PCS PCS Front Bulkhead-Rear Pin Mount Set Front upper suspension arm mount PCS Front lower arms PCS Rear lower arms PCS T008 T09 T00 T0 Rear shock tower PCS Rear brace mount PCS Front shock tower PCS Battery plate PCS T00 T004 T008 T006 Servo saver upper PCS Rear body mount PCS Servo saver lower PCS Servo saver - L PCS Steering Rack PCS Wing bracket PCS Battery column PCS Wing angie shim PCS Front bumper PCS Motor guard PCS T007 T008 T009 T000 Steering Steering Servo Steering Servo horn-f horn-h Servo horn-s PCS PCS PCS Servo plate PCS 4.8 Ball End-Long 6PCS 4.8 Ball End-Short PCS x0 Screw PCS T04 T0 T0 T004 Below Spring mount end PCS 5.8 Ball End PCS Front rim PCS Rear rim PCS Hexagonal x9.8 Pin T005 T006 T007 T008.0 Servo spacer PCS.5 Servo spacer PCS Motor plate PCS Front hinge pin brace PCS Slipper pad PCS

25 BUGGY PARTS LIST T04 T0040 T004 T004 PCS PCS 4.0 E-ring PCS Slipper hub PCS Slipper Spring PCS Top shaft spacer PCS PCS Servo Saver Shaft Assembly PCS T004 T0044 T009 T E-ring PCS x0 Screw PCS x9.8 Pin PCS Front wheel axle PCS Block Carrier PCS x7x0.8 Washer PCS x54 Turnbuckle PCS idler gear shaft PCS T005 T0054 T0055 T0056. E-ring. E-ring Gear 0T PCS x7.5 Hinge pin front outer x48 Hinge pin Rear inner PCS PCS x4.5 Hinge pin front inner PCS T0057 T05 T0059 T0060. E-ring x0.5 Hinge pin Rear outer Rear Drive Shaft Assembly Ball stud - long PCS PCS PCS Ball stud - short 5PCS T06 T07 T07 T08 x4.5 Front Shock Shaft PCS Ball stud - silvery PCS Shock End Eyelet 5.8X6 Upper Shock Bushing. E-ring T09 T0066 T0067 T0068 8x O-ring PCS 8x O-ring PCS x5 Rear Shock Shaft PCS Shock Absorber upper cover-plastic PCS Shock Absorber upper cover-plastic PCS. E-ring Front damper case PCS PCS Shock Absorber below cover-plastic top Spring mount end PCS Rear damper case PCS PCS Shock Absorber below cover-plastic top Spring mount end PCS Shock piston

26 BUGGY PARTS LIST T0069 T040 T007 T007.xmm Plastic Washer.8x.9 O-ring.5 Press washer mm adjuster ring mm adjuster ring mm adjuster ring 5mm adjuster ring Front spring PCS Rear spring PCS T007 T0074 T0075 T008 Diaphragm PCS PCS Rear buggy tires with foams PCS PCS Front ribbed buggy tires with foams x7x0.8 Washer 0PCS T008 T008 T0084 x5 Screw x8 Screw x Screw x5 Screw x5 Screw x Screw x0 Screw.6x8 Screw x8 Screw x0 Screw x5 Screw x8 Screw M4 Flanged Nylon Nut 6PCS M Nylon Nut 6PCS T0088 T0089 Front shock set buggy PCS Rear shock set buggy PCS T0085 T0086 T0087 TU06. E-ring 4 E-ring Small clip Antenna pipe PCS set cover Double-sided tape PCS Antenna pipe set PCS pcs Vented Slipper Hub

27 BUGGY PARTS LIST TU08 Tu09 Tu00 Tu0 Servo Saver-Aluminium C-Type-Holder 5 Degree C-Type-Holder 0 Degree Rear arm mount F/R Set Tu0 Tu0 Tu04 Tu05 4pcs Mx5 Screw Front arm mount Mx Set Rear arm mount -Ball 8pcs Servo mount pcs 4pcs 5.x8x0. Washer Hex mount 4pcs TU07 Tu09 Tu00 Tu0 set pcs Rear Brace Mount w/0g Weight Motor mount Hard Spring Set F&R Medium Spring Set F&R Tu0 Tu06 Tu07 TU040 pcs pcs pcs Soft Spring Set F&R Rear hub carriers Rear Hub Degree Carbon Front Shock Tower - Buggy pcs TU04 Tu048 TU054 TU076 Carbon Rear Shock Tower-Buggy pcs Aluminum Front Camber Link Mount pcs 4pcs mm Hex Hub-4mm pcs 86T Kevlar Gear TU077 pcs 80T Kevlar Gear

28 BUGGY PARTS LIST RCET0005 GEAR COVER...$.49 RCET000 MAIN CHASSIS PLATE...$ 7.99 RCET00 CASTOR BLOCKS L/R...$.99 RCET00 STEERING BLOCK...$.99 RCET00 REAR HUB CARRIERS...$.99 RCET004 FRONT BULKHEAD-REAR PIN MOUNT SET..$.99 RCET005 FRONT CAMBER LINK MOUNT...$.99 RCET008 REAR CHASSIS BRACE MOUNT...$.99 RCET00 SERVO SAVER SET...$.99 RCET004 STEERING RACK...$.99 RCET006 MOTOR GUARD...$ 4.99 RCET007 STEERING SERVO HORN F/H/S ()...$.49 RCET008 SERVO MOUNT...$.99 RCET BALL CUP - LONG (6)...$ 4.99 RCET BALL CUP - SHORT (-SERVO LINK)...$.99 RCET004 HEX WHEEL HUBS W/PINS (4)...$.99 RCET005 SERVO SPACERS...$.49 RCET006 MOTOR PLATE (RED)...$ 5.99 RCET007 FRONT HINGE PIN BRACE (RED)...$.99 RCET008 SLIPPER PAD...$ 4.99 RCET0040 SLIPPER SPRING...$.49 RCET004 T SHAFT SPACER...$.49 RCET004 FRONT WHEEL AXLE...$.99 RCET004 SERVO SAVER SHAFT ASSEMBLY...$ 0.99 RCET0044 SERVO SAVER HARDWARE...$ 5.99 RCET0045 x54 TURNBUCKLE()... $.49 RCET005 IDLER GEAR SHAFT...$.99 RCET005 T SHAFT...$.99 RCET0054 FRONT HINGE PIN OUTER ()...$.99 RCET0055 REAR HINGE PIN INNER ()...$.99 RCET0056 FRONT HINGE PIN INNER ()...$.99 RCET0057 REAR HINGE PIN OUTER ()...$.99 RCET0059 BALL STUD - LONG ()...$.99 RCET0060 BALL STUD - SHORT (5)...$.99 RCET0066 FRONT SHOCK BODY SET W/CAPS...$ 6.99 RCET0067 REAR SHOCK BODY SET W/CAPS...$ 6.99 RCET0068 SHOCK PISTON...$.49 RCET0069 SHOCK CARTRIDGE ASSEMBLY...$.49 RCET007 FRONT SPRING ()...$.99 RCET007 REAR SPRING ()...$.99 RCET007 SHOCK BLADDER (4)...$.99 RCET0074 REAR BUGGY TIRES WITH FOAMS()...$.99 RCET0075 FRONT RIBBED BUGGY TIRES WITH FOAMS()...$.99 RCET0076 STOCK BUGGY BODY LEXAN - CLEAR... $.99 RCET0076B STOCK BUGGY BODY LEXAN - BLUE... $ 4.99 RCET0076R STOCK BUGGY BODY LEXAN - RED... $ 4.99 RCET0078 0X5X4 OIL BEARING (6)...$ 6.99 RCET0079 5X0X4 OIL BEARING (6)...$ 4.99 RCET0080 BALL BEARING X6X.5 FLANGED (4)...$ 8.99 RCET008 WASHER x7x0.8 (0)...$.99 RCET008 SCREW SET A...$ 6.99 RCET008 SCREW SET B...$ 4.99 RCET0084 M/M4 NUT (6 EACH)...$.99 RCET0085 E-RING. & 4 E-RING (8 EACH)...$.99 RCET0086 BODY CLIP (8)...$.5 RCET0087 ANTENNA PIPE...$.99 RCET0088 FRONT SHOCK SET BUGGY()...$ 4.99 RCET0089 REAR SHOCK SET BUGGY()...$ 4.99 RCET009 TURNBUCKLE...$.49 RCET009 BALL STUD 4.8 X.5 - (5)...$ 5.99 RCET00 REAR WING - BUGGY... $.99 RCET004 FRONT A-ARMS ()...$ 9.99 RCET005 REAR A-ARMS ()...$ 9.99 RCET008 WING MOUNT & BATTERY POST SET... $ 7.49 RCET04 SPRING CUP/BALL END 5.8 ()...$.99 RCET07 UPPER SHOCK BUSHING...$.99 RCET09 80T SPUR GEAR...$.49 RCET09 FRONT SHOCK TOWER...$ 4.99 RCET00 REAR SHOCK TOWER...$ 4.99 RCET0 BATTERY SPACER - FOAM BATTERY BRACE... $.49 RCET0 FRONT RIM PCS WD BUGGY...$ 7.99 RCET0 REAR RIM PCS WD BUGGY...$ 9.99 RCET04 SLIPPER HUB ()...$ 4.99 RCET05 REAR DRIVE SHAFT ASSEMBLY ()...$ 9.99 RCET06 BALL STUD - SILVER ()...$.99 RCET07 SHOCK END EYELET 5.8X6 (4)...$.99 RCET08 x4.5 FRONT SHOCK SHAFT() -. E-RING(4)...$.49 RCET09 x5 REAR SHOCK SHAFT() -. E-RING(4)...$.49 RCET040 SHOCK ADJUSTER RING...$.99 RCET047 FRONT CHASSIS ASSEMBLY...$ 7.99 RCET050 GEAR DIFFERENTIAL CASE... $.99 RCET05 REAR CHASSIS PLATE (GEAR DIFF)...$ 5.99 RCET05 5T DIFF GEAR & COVER (GEAR DIFF)...$ 9.99 RCET05 GEAR DIFFERENTIAL SEAL()...$.49 RCET054 4/8 INTERNAL GEAR SET (GEAR DIFF)...$ 4.99 RCET055 GEAR DIFFERENTIAL OUTDRIVES()... $ 4.99 RCET x.6 GEAR DIFF O-RING(4)... $.99 RCET057 GEAR DIFF SHAFT...$.99 RCET06 RECEIVER BOX... $.49 RCET0880 M.5X8 SCREW...$.90 RCETU00 GEAR DIFF CONVERSION KIT WD... $ 5.99 RCETU06 RCETU08 RCETU09 RCETU00 RCETU0 RCETU0 RCETU0 RCETU04 RCETU05 RCETU07 RCETU09 RCETU00 VENTED SLIPPER HUB...$ ALUMINUM SERVO SAVER WD... $ ALUMINUM CASTOR BLOCKS 5 DEGREE...$ ALUMINUM CASTOR BLOCKS 0 DEGREE... $ ALUMINUM REAR ARM MOUNTS()...$ FRONT BULKHEAD W/G WEIGHT... $ HINGE PIN PIVOT BALL(8)... $ ALUMINUM SERVO MOUNT... $ ALUMINUM MM HEX HUB...$ ALUMINUM REAR BRACE MOUNT W/0G WEIGHT...$ ALUMINUM FINNED MOTOR PLATE...$ HARD SPRING SET F&R(4)RTR...$ RCETU0 MEDIUM SPRING SET F&R(4)RTR...$ 5.99 RCETU0 SOFT SPRING SET F&R(4)RTR... $ 5.99 RCETU06 RCETU07 RCETU09 ALUMINUM REAR HUB CARRIERS 0D... $ ALUMINUM REAR HUB CARRIERS D...$ CARBON FIBER REAR CHASSIS PLATE (BALL DIFF)...$ RCETU040 RCETU04 RCETU048 RCETU054 RCETU076 CARBON FIBER BUGGY FRONT SHOCK TOWER...$ CARBON FIBER BUGGY REAR SHOCK TOWER...$ ALUMINUM FRONT CAMBER LINK MOUNT...$ MM HEX HUB - 4MM OFFSET...$ 86T KEVLAR GEAR...$ RCETU077 80T KEVLAR SPUR GEAR... $ 6.99 RCETS0 8T IDLER GEAR ALUMINUM...$ 9.99 RCESGSL KV SENSORLESS BL 540 MOTOR...$ RCESGS6 6 KG METAL GEAR SERVO.8-8OZ... $ 4.99 RCETG05C PLASTIC SHOCK CAPS(4)... $.99 RCETSTBF PREMOUNTED FRONT TIRES & WHEELS WD BUGGY... $ 6.99 RCETSTBR PREMOUNTED REAR TIRES & WHEELS WD BUGGY... $ 9.99

29 Driver Track / City B uggy - Setup Sheet Event Date / / Conditions Smooth Bumpy Low traction Med traction High traction Sandy Soft dirt Grass Hard soil Clay Front Suspension Shock Mounting&Camber link Front Shocks Spring(color) Caster Black # Washers Camber 5 0 Wet Dry Dusty Other mm Toe-in (+)/Out (-) Bump Steep Spacer mm mm Oil Piston # wt # Washers mm Ride height Rear Suspension Shock Mounting&Camber link Wheelbase Long Medium Short Camber Normal 4 Aluminum(Opt) # Washers mm Rear Shocks mm mm Spring(color) Black Oil Piston # wt 4 Ride height Diff Front Tires&Wheels Front Tires&Wheels Brand Oil wt Front Tires Inserts Wheels Front Tires Inserts Wheels Batteries Motor Other Servo Esc Batteries Motor Pinion/Spur / Wing Wing Angle 4 0 Comments Notes

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend

More information

New Generation Rear Wheel Drive

New Generation Rear Wheel Drive New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS

More information

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new

More information

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1 ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following

More information

DIFFERENTIAL STEERING RACK

DIFFERENTIAL STEERING RACK BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball

More information

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to

More information

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE

More information

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly

More information

ABC HOBBY ORIGINAL RADIO CONTROL CAR

ABC HOBBY ORIGINAL RADIO CONTROL CAR ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE

More information

Sportwerks Raven RTR Assembly and Operation Manual

Sportwerks Raven RTR Assembly and Operation Manual Sportwerks Raven RTR Assembly and Operation Manual Specifications: Scale.............. 1/10 Length............. 16 in (406mm) Front Track.......... 12.75 in (324mm) Rear Track.......... 12.5 in (318mm)

More information

PREBUIL UILT ASSEMBLY AND OPERATION MANUAL

PREBUIL UILT ASSEMBLY AND OPERATION MANUAL PREBUIL UILT Length: 15.2" [385mm] Width: 13" [330mm] Height: 5.8" [147mm] Weight: 3.3 lb [1500g] Wheelbase: 11.6" [295mm] Technical Support Information For technical assistance, contact: DuraTrax Product

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic

More information

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months

More information

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The

More information

1/10 Scale 4WD 200mm Gas Power Touring Car

1/10 Scale 4WD 200mm Gas Power Touring Car 1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed

More information

POWER TRUCK XGX 3 PACKING LIST INSTRUCTION MANUAL

POWER TRUCK XGX 3 PACKING LIST INSTRUCTION MANUAL XGX 3 POWER TRUCK INSTRUCTION MANUAL 14 PARTS - SERVICE - REPAIRS OPEN Mon - Fri 9 am-6 pm... Sat 10 am-3 pm (EST) Distributed and serviced by: Extreme RC by RSI... Ferndale, MI 48220 Phone: (586) 757-1336

More information

Item Number Item Name MSRP MAP

Item Number Item Name MSRP MAP Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL

More information

BEFORE YOU START CUSTOMER SUPPORT

BEFORE YOU START CUSTOMER SUPPORT BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

RECOMMENDED TOOLS INCLUDED EQUIPMENT PRECAUTIONS

RECOMMENDED TOOLS INCLUDED EQUIPMENT PRECAUTIONS Thank you for purchasing Pro-Line s Ambush Mini Scale Crawler! For Over 30 years, Pro-Line has designed and manufactured the best RC products in the world. This crawler has been developed from the ground

More information

OWNER'S MANUAL 2000 & ROAR National Champion

OWNER'S MANUAL 2000 & ROAR National Champion 2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert

More information

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909) OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of

More information

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675 pr GT RACING FRONT RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

INSTRUCTION MANUAL 1/10TH SCALE HI4123/HI4123BL DRIFT CAR HI5101/HI5101BL ON ROAD CAR ITEM N0.HI4123 HI4123BL ITEM N0.HI5101 HI5101BL.

INSTRUCTION MANUAL 1/10TH SCALE HI4123/HI4123BL DRIFT CAR HI5101/HI5101BL ON ROAD CAR ITEM N0.HI4123 HI4123BL ITEM N0.HI5101 HI5101BL. 1/10TH SCALE HI4123/HI4123BL DRIFT CAR HI5101/HI5101BL ON ROAD CAR drift TC ITEM N0.HI4123 HI4123BL INSTRUCTION MANUAL NASCADA ITEM N0.HI5101 HI5101BL 01 02 03 04 MT-300 MT-300TX MT-300RX MT-300TX MT-300RX

More information

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01 BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6

More information

INSTRUCTION MANUAL INSTRUCTION MANUAL

INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale

More information

.050 Allen key 1.5mm Allen key 1/16 Allen key 5/64 Allen key 3/32 Allen key Turnbuckle & 3/16 wrench

.050 Allen key 1.5mm Allen key 1/16 Allen key 5/64 Allen key 3/32 Allen key Turnbuckle & 3/16 wrench 1 Thank you for purchasing the Outlaw 4 Sprint Car! The Outlaw sprint car platform has been developed for loose dirt buggy tire racing. In this kit you will find the 4 th evolution of the car which features

More information

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

MR-4BCS Parts List (Updated 9/15/03)

MR-4BCS Parts List (Updated 9/15/03) 4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate

More information

ASSEMBLY AND OPERATION MANUAL

ASSEMBLY AND OPERATION MANUAL ASSEMBLY AND OPERATION MANUAL www.duratrax.com ITEMS INCLUDED The following items are included with your Vendetta Rally. Chassis Transmitter Body Decal Sheet Instruction Manual Exploded View/Parts Listing

More information

SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear

More information

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we

More information

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

for the B3 Sport kit #9013

for the B3 Sport kit #9013 All kit versions include: 2.40:1 transmission for effortless power handling. Molded composite chassis for better rigidity and Lexan B3 racing body. Quadra-symmetric suspension for greater stability and

More information

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW

More information

INSTRUCTION. FOX4x4 Kit Features:

INSTRUCTION. FOX4x4 Kit Features: INSTRUCTION Congratulations on your purchase of the new SWORKz 1/10 scale FOX4x4 off-road ready to run brushless power CAGE buggy. Please read this manual thoroughly before you attempt to drive your FOX4x4.

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown.

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown. Install steering rack assembly to chassis using 2-4-40 x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as Qty 2, 4-40 x 3/8 fhcs Qty 2, 6.4mm x 1.1mm blue aluminum spacer

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price Replacement Parts List Part Number Description Price 48 Pitch Pinion Gear, 12T...$4.99 LOSA4006 Antenna Tube and Set Screw...$1.50 LOSA4015 Battery Foam...$2.50 LOSA5224 Silicone Shock Oil, 30 wt, 2 oz...$3.99

More information

carbon fiber before assembly. Sand glue to the edges and

carbon fiber before assembly. Sand glue to the edges and chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28

More information

#0980 Intimidator 7 Direct Drive Racing Kit

#0980 Intimidator 7 Direct Drive Racing Kit #0980 Intimidator 7 Direct Drive Racing Kit 1 Thank you for purchasing the Intimidator 7! Within this kit you will find a race winning car with over 30 years of Custom Works design and quality. The latest

More information

BIND ST-TRIM TH-TRIM ST-D/R

BIND ST-TRIM TH-TRIM ST-D/R 4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint

More information

Rustler 4X4 (Model ) Parts List

Rustler 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

RTR Instruction Manual

RTR Instruction Manual RTR Instruction Manual OFNA RACING 22692 Granite Way, Ste. B Laguna Hills, CA. 92653 PRE-ASSEMBLED ASSEMBLED CHASSIS WITH RADIO AND ENGINE REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01 NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

1:8 SCALE GAS POWERED OFF-ROAD BUGGY

1:8 SCALE GAS POWERED OFF-ROAD BUGGY SUPPLEMENTAL MANUAL TQ Sport 1:8 SCALE GAS POWERED OFF-ROAD BUGGY INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. SPECIFICATION

More information

Bigfoot (Model ) Parts List

Bigfoot (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

Bag 1. Bag 1. Center Pivot. Center Pivot

Bag 1. Bag 1. Center Pivot. Center Pivot 8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball

More information

1:8 SCALE GAS POWERED OFF-ROAD BUGGY

1:8 SCALE GAS POWERED OFF-ROAD BUGGY Instruction RTR Manual 1:8 SCALE GAS POWERED OFF-ROAD BUGGY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS

More information

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items

More information

Assembly Manual. 1/10th Formula 1 Car

Assembly Manual. 1/10th Formula 1 Car Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp

More information

X-Maxx (Model ) Parts List

X-Maxx (Model ) Parts List X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

... REQUIRED READING...

... REQUIRED READING... REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW! Within this kit you will find a race winning car with over 21 years worth of CUSTOM WORKS design

More information

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear 1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958

More information

RTR Instruction Manual

RTR Instruction Manual OFNA Racing 22692 Granite Way, Ste. B Laguna Hills, Ca. 92653 (949) 586-2910 Www.ofna.com RTR Instruction Manual PURE COMPETITION... PRE-ASSEMBLED ASSEMBLED CHASSIS WITH RADIO AND ENGINE REQUIRED FOR OPERATION

More information

Very Fun & Easy NOTICE

Very Fun & Easy NOTICE Very Fun & Easy NOTICE NOTICE All instructions, warranties and other collateral documents are subject to change at the sole discretion of our company. For up-to-date product literature, Visit our website

More information

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are

More information

LENGTH WIDTH HEIGHT WHEELBASE WHEEL DIA. WHEEL WIDTH GROUND CLEARANCE

LENGTH WIDTH HEIGHT WHEELBASE WHEEL DIA. WHEEL WIDTH GROUND CLEARANCE RTR Hobby Grade Four Wheel Drive Splash-resistent Metal Diff. FUN-AFFORDABLE If you do not use it for any extended period of time (e.g. during storage), disconnect and remove the rechargeable batteries

More information

Make these adjustments before racing

Make these adjustments before racing FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

ASSOCIATED 1:10 SCALE GT MANUAL

ASSOCIATED 1:10 SCALE GT MANUAL ASSOCIATED 0 SCALE GT MANUAL INSTRUCTION MANUAL FOR THE RC10GT GAS TRUCKS #7060, 7061, 7067, 7068, & 7090 ASSOCIATED S RC10GT-- 3 TIMES NORRCA WORLD CUP CHAMPION! 200 Thank you for purchasing this Team

More information

ASSOCIATED 1:10 SCALE T3 MANUAL

ASSOCIATED 1:10 SCALE T3 MANUAL ASSOCIATED 0 SCALE T3 MANUAL INSTRUCTION MANUAL FOR THE RC10T3 ELECTRIC TRUCKS #7003, 7009, 7010, 7013, 7038, 7048 ASSOCIATED S RC10T3 TRUCK-- READER S CHOICE OF THE YEAR TIMES! Radio Control Car Action

More information

1/10 Competition Ready to Run Truck Little Orchard St. San Jose CA,

1/10 Competition Ready to Run Truck Little Orchard St. San Jose CA, 1/10 Competition Ready to Run Truck RC4WD WWW.RC4WD.COM 1855 Little Orchard St. San Jose CA, 95125 E-mail: rcrock@rc4wd.com Check out Precautions To Prevent Serious Personal injury and/or property damage,

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)

More information

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.

More information

RTR KITS - REQUIRED FOR OPERATION

RTR KITS - REQUIRED FOR OPERATION Strong Front and Rear chassis braces. Tuned Polished Dual Chamber racing pipe. Unique adjustable chassis width of 310mm or 330mm. High performance.26 engine with Shaft Start Motor handle. Full race Offset

More information

The following items are needed to install your Speed Kit. Phillips head screw driver 3/16" nut driver 1.5mm hex wrench

The following items are needed to install your Speed Kit. Phillips head screw driver 3/16 nut driver 1.5mm hex wrench BRUSHLESS SPEED KIT INSTALLATION INSTRUCTIONS REQUIRED TOOLS The following items are needed to install your Speed Kit. Phillips head screw driver 3/16" nut driver 1.5mm hex wrench 1. REMOVE STEERING LINKAGE

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

WARNING! Hard anodized, PTFE-coated shocks. Hard anodized, PTFE-coated MIP CVD's.

WARNING! Hard anodized, PTFE-coated shocks. Hard anodized, PTFE-coated MIP CVD's. 200 Thank you for purchasing this Team Associated product. This manual contains steps and instructions you will use to set up your gas truck. Please read this entire manual before attempting to start your

More information

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange

Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arrange Slash: TQ 2.4GHz radio (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

SOARSEIKI.Co.,Ltd

SOARSEIKI.Co.,Ltd SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040

More information

ASSEMBLY AND OPERATION MANUAL

ASSEMBLY AND OPERATION MANUAL Length: 9.5" [240mm] Width: 7.4" [185mm] Height: 4.7" [120mm] Ground Clearance: 1.25" [32mm] Weight: 25 oz [725g] approx. running weight with battery/motor/esc Technical Support Information For technical

More information

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items

More information

E-Revo (Model 5603) Parts List

E-Revo (Model 5603) Parts List E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18

More information

Quick-Start Guide. Distributed in the UK by: J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL.

Quick-Start Guide. Distributed in the UK by: J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL. Quick-Start Guide Product specifications are subject to change without notice. Due to ongoing development, the actual product may vary from images shown. This product contains chemicals known to the State

More information

... REQUIRED READING...

... REQUIRED READING... REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW! Within this kit you will find a race winning car with over 21 years worth of CUSTOM WORKS design

More information

HI PerFORMANCE 1/8 OFF-ROAD NITRO BUGGY. Instruction manual OFNA 7 VANDERBILT, IRVINE, CA PH. (949)

HI PerFORMANCE 1/8 OFF-ROAD NITRO BUGGY. Instruction manual OFNA 7 VANDERBILT, IRVINE, CA PH. (949) HI PerFORMANCE 1/8 OFF-ROAD NITRO BUGGY. Instruction manual OFNA 7 VANDERBILT, IRVINE, CA 92618 PH. (949) 586-2910 THINGS NEEDED RTR KITS - REQUIRED FOR OPERATION You will need to buy a few items to start

More information

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED

More information

Quick-Start Guide. Distributed in the UK by: J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL.

Quick-Start Guide. Distributed in the UK by: J Perkins Distribution Ltd, Lenham, Kent, UK ME17 2DL. Quick-Start Guide Product specifications are subject to change without notice. Due to ongoing development, the actual product may vary from images shown. This product contains chemicals known to the State

More information

En Instruction Manual De Bauanleitung. Fr Manuel de montage

En Instruction Manual De Bauanleitung. Fr Manuel de montage En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087

More information

NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty.

NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty. OWNER'S MANUAL NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty. Carefully read through all instructions to familiarize yourself with the parts,

More information

Slash (Model 58024) Parts List

Slash (Model 58024) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58024) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Assembly Manual. 1/10th World GT car

Assembly Manual. 1/10th World GT car Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Rustler (Model 37054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC #0928 ENFORCER GSX2 RACING KIT

Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC #0928 ENFORCER GSX2 RACING KIT #0928 ENFORCER GSX2 RACING KIT Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and

More information

X-Wide Body Red Standard 78T Big Shot Red Standard Trim inside corners of Foam inserts.

X-Wide Body Red Standard 78T Big Shot Red Standard Trim inside corners of Foam inserts. SUPER DIALED SETUP! KIT SETUP 0 24mm, Arms level -1 30 No 27.5wt. #56 Orange None Bottom Narrow Rack None 3-B, 1-Ball Stud Washer 3-Middle Short Yes, on Tower 3 Pivot, 0 Hubs 2 23mm, Dogbones just under

More information

1/6 GAS-POWERED 2WD BUGGY

1/6 GAS-POWERED 2WD BUGGY 1/6 GAS-POWERED 2WD BUGGY ASSEMBLY AND OPERATING INSTRUCTIONS Features of Your New XTM Racing 1/6 Gas-Powered 2WD Buggy: Incredible 1/6 Scale Size! Includes 23cc Gasoline Engine with Pull-Starter Steel

More information

TOOLS NEEDED TO BUILD THIS KIT

TOOLS NEEDED TO BUILD THIS KIT TOOLS TOOLS NEEDED TO BUILD THIS KIT 1. ALLEN WRENCHES A..050" B. 1/16" C. 5/64" D. 3/32" E. 2.5mm 2. NUT DRIVERS A. 3/16" B. 1/4" C. 11/32" 3. MISC. TOOLS A. NEEDLE NOSE PLIERS B. THREAD LOCKING COMPOUND

More information

Slash (Model ) Parts List

Slash (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash (Model 58034-2) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

2103 NITRO RAIL DRAGSTER KIT

2103 NITRO RAIL DRAGSTER KIT 203 NITRO RAIL DRAGSTER KIT THANKS FOR BUYING RJ SPEED S NITRO DRAG KIT. IT IS A LITEWEIGHT CAR MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS AT HIGH SPEED. YOU WILL NEED

More information

#0710 ELECTRIC ROCKET KIT

#0710 ELECTRIC ROCKET KIT #0710 ELECTRIC ROCKET KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the

More information

CONFIGURATION(astro/blaze) REQUIRES #

CONFIGURATION(astro/blaze) REQUIRES # CONFIGURATION(astro/blaze) Length: 29.1in(740mm) Wing Span: 31.9in / 31.1in(810 / 790mm) Wing Area: 1.61 / 1.53ft²(15 / 14.2dm²) Flying Weight: 21oz(600g) REQUIRES Radio control system with 4 channels(delta-mix.)

More information

Slash VXL (Model ) Parts List

Slash VXL (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slash VXL (Model 58076-3) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information