Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Size: px
Start display at page:

Download "Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan"

Transcription

1

2 Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly 6.Drive Train Installation 7.Front Shock Mount 8.Rear Shock Mount 9.Steering Crank Assembly 10.Upper Deck Installation 11.Front Suspension Arm Assembly 12.Front Suspension Installation 13.Rear Suspension Arm Assembly 14.Rear Suspension Installation Drive Shaft Assembly (50,52) 16.Front Hub Carrier Assembly 17.Front Suspension Installation 18.Rear Carrier Assembly 19.Rear Suspension Installation 20.Upper Arm and Steering Rod Assembly 21.Upper Arm Installation 22.Steering Rod Installation 23.Shock Parts Assembly 24.Shock Assembly 25.Front Shock Installation 26.Rear Shock Installation 27.Front Body Mount Installation 28.Bumper Installation Rear Body Mount Installation 30.Radio Connections 31.Steering Servo Assembly 32.Steering Servo Installation 33.R/C Unit Installation 34.Motor Installation 35.Battery Holder Installation 36.Battery Installation 37.Body Installation Gear Ratio Setting Sheet Symbols Used Apply Thread Lock BagA L=R! (Not Included) (Not Included) Apply Silicone Oil Tools Required Silicone Oil (Not Included) (Not Included) (Not Included) (Not Included) (Not Included) (Not Included) Equipment Required (Not Included) (Not Included) (Not Included) (Not Included) (Not Included) 30 Fan (Not Included) (Not Included) (Not Included) (Not Included) (Not Included) 1

3 Assembly Instruction BagA 1 Filing the Edges of the Chassis Bottom Note Direction SPR-S1C603 File and round off the edges facing the bottom to prevent battery tape from tearing. BagC BagJ 2 Bulkhead Installation M3x6 SPR-S1P401 SPR-S1P401 6 Flat Head Screw SPR-S1P401 SPR-S1P401 SPR-S1A201 Flat Head Screw M3x6 SPR-S1P401 SPR-S1P401 Front Please note the Bulkhead are installed properly Rear 2

4 BagE 3 Spur Gear Assembly BagQ 5x8.5 M2x6 SPR-R1P311 Flat Head Screw M2x6 SPR-R1P314 5x8.5 5x8.5 Tips SPR-R1P311 M2x6 and Screws should be tightened properly as shown. Bag D BagE 4 Front Spool Assembly BagQ SPR-R1P317 Front Spool Outdrive Adapters Flat Head Screw M34 M SPR-R1P SPR-R1P317 SPR-R1P312 SPR-R1P SPR-R1P304 SPR-R1P312 SPR-R1P M34 Plastic Collar 103 3

5 BagD BagE 5 Gear Differential Assembly BagQ BagR SPR010-G2 SPR010-G2 Gear Diff. Joint SPR010-G2 X-Ring SPR010-G2 SPR010-G2 Flat Head Screw M2.61 SPR-R1P319 Recoend to give the gear a polish before assemble 4x7.5 Bevel Gear 1 2 SPR-R1A125 3 Satellite Gear M2.61 SPR010-G2 Silicone Oil #1000 Gear Axial Suggested oil level SPR010-G2 SPR-R1P319 X-Ring SPR010-S x7.5 SPR-R1P323 4x7.5 SPR-R1A SPR-R1P312 Plastic Collar X-Ring Gasket SPR-R1P Shim 43x0.2 SPR-R1P312 Pin 1.5x8.5 O-ring 23 7 SPR-R1P

6 BagE BagF 6 Drive Train Installation Note Direction (setting belt tension) BagJ BagK BagO Loose Rear Tight Note Direction (setting belt tension) SPR-R1P311 SPR-R1A104 SPR-R1P324 Flat Head Screw Spur Gear shaft Bushing Tight Front Loose SPR-R1P310 SPR-R1P325 SPR-R1P310 SPR-R1P311 SPR-R1A127 Alu.Flat Head Washer M3 Plastic Shim 5x7x0.5 Spur Gear Shaft 5x34 BagB BagC 7 Front Shock Mount Assembly and Installation Ball Stud 4.7x5 BagH BagK SPR-S1P401 Front SPR-S1P401 SPR-S1C601 Ball Stud 4.7x5 M3x6 Button Head Screw Standard Hole use M3x6 Flat Head Screw Ball Stud 4.7x5 Flat Head Screw M3x6 Plastic Spacer 3x5.5 5

7 BagB BagC 8 Rear Shock Mount Assembly and Installation BagH BagK Ball Stud 4.7x5 SPR-S1P401 Rear SPR-S1P401 SPR-S1C602 Ball Stud 4.7x5 Button Head Screw M3x6 Flat Head Screw Flat Head Screw M3x6 Ball Stud 4.7x5 Standard Hole use Plastic Spacer 3x5.5 M3x6 BagB BagK 9 Steering Crank Assembly BagQ M3x6 Ball Stud 4.7x5 3x6.5 M3x6 3x6.5 Button Head Screw M3x6 M3x6 SPR-S1P404 SPR-S1C604 Flat Head Screw M3x6 3x6.5 Ball Stud 4.7x8 5x8.5 (Flanged) 5x8.5 (Flanged) 5x8.5 (Flanged) Steering Post 5x8.5 (Flanged) Steering Post Steering Post Tip Ball Stud 4.7x5 Ball Stud 4.7x8 M3x6 6

8 BagA BagE 10 Upper Deck Installation BagQ 3 M32 Nut M3 3x6.5 (Flanged) SPR-R1P312 M3x6 M3x6 Button Head Screw M3x6 Button Head Screw M32 Lock Nut M3 SPR-S1C605 3x6.5(Flanged) Lock Nut M3 M3x6 M3x6 Nut M3 BagG H Bag 11 Front Suspension Arm Assembly BagK M4x8 3x5 SPR-S1P402 SPR-R1A112 Set Screw M4x8 Plastic Pivot Ball 3x5 Plastic Spacer 3x5 Plastic Spacer 3x5x3 D B SPR-S1P402 Front M4x8 3x5x3 SPR-S1P402 B D 3x5 Pivot Pin 36 7

9 BagG 12 Front Suspension Installation x6 Flat Head Screw Note Direction SPR-S1P402 SPR-S1P402 BagG BagH 13 Rear Suspension Arm Assembly BagK M Bag 3x5 SPR-S1P402 Rear Set Screw M4x8 M4x8 Plastic Pivot Ball 3x5 Plastic Spacer 3x5 D B 3x5x3 M4x8 SPR-R1A112 3x5 SPR-SIP402 Plastic Spacer 3x5x3 SPR-S1P402 B D Pivot Pin 36 8

10 BagG 14 Rear Suspension Installation x6 Note Direction SPR-S1P402 Flat Head Screw SPR-S1P402 Suspension Mount Adapter (SPR-SIP402) Toe Angle In 2.5 In 3.0 (Standard) In 3.5 BagL 15 Drive Shaft Assembly (50) 4x Make 4 SPR-R1A

11 BagH BagK BagQ 16 Front Hub Carrier Assembly L Left Links SPR-R1A103 Button Head Screw SPR-R1A SPR-R1P301 4L 50 SPR-R1A103 SPR-R1P Ball Stud 4.7x5 Ball Stud 4.7x9 (2 Socket) R Right Links SPR-R1A103 SPR-R1A103 Ball Stud 4.7x5 SPR-R1P303 Ball Stud 4.7x5 SPR-R1A103 Steering Block Bushing SPR-R1P301 4R SPR-R1A SPR-R1A BagK Set Screw M3 M Bag Outer Pivot Pin Front Suspension Installation M3 R Right Links SPR-R1A113 L Left Links SPR-R1A113 M3 10

12 BagD BagH 18 Rear Carrier Assembly BagK BagQ 2x Make 2 SPR-R1P Ball Stud 4.7x8 SPR-R1A Ball Stud 4.7x8 Plastic Spacer 3x5.5 SPR-R1P K BagA Bag Set Screw M3 GM Outer Pivot Pin Rear Suspension Installation M3 SPR-R1A113 SPR-R1A113 M3 11

13 I Bag BagK 20 Upper Arm and Steering Rod Assembly A Front Rod SPR-R1P306 BagN End Cap L=R B Rear Rod 14.5 M3x35 SPR-R1P306 Turnbuckle M30 Turnbuckle M3x35 Turnbuckle M30 SPR-R1P C Steering Rod-1 M SPR-R1P306 M3x35 4 E Steering Rod-L D Steering Rod-R SPR-R1P306 SPR-R1P M30 25 M30 21 Upper Arm Installation B Rear Rod A Front Rod 12

14 22 Steering Rod Installation D C E BagP 23 Shock Parts Assembly Shock Shaft 28 x8 4x Make 4 SPR-R1A121 SPR-R1A121 SPR-R1P309 E Clip 2 Shaft Guide SPR-R1A126 Oil SPR-R1P322 SPR-R1A126 SPR-S1P403 O-ring Guide SPR-R1P308 SPR-R1P309 Shock Piston (Standard) Silicone oil #500 SPR-R1P315 SPR-R1P308 SPR-R1P321 Bladder 12x3.5 O-ring Position the piston with the shock tool for setting the desired rebound. Hold the shock with the shock tool as shown; carefully tighten the shock cap. 13

15 BagP 24 Shock Assembly 4x Make 4 SPR-R1P308 SPR-R1A126 O-ring 62 Front Spring (Red) Rear Spring (White) BagP 25 Front Shock Installation M3x6 Button Head Screw M3x6 SPR-R1A124 Set Screw RED Ball Universal 4.7 SPR-R1A124 3 remain RED 3 remain SPR-R1A124 BagP 26 Rear Shock Installation M3x6 Button Head Screw M3x6 SPR-R1A124 Set Screw White Ball Universal remain 3 remain SPR-R1A124 White 14

16 BagN x5 27 Front Body Mount Installation Flat Head Screw Lock Nut M3 SPR-R1P316 SPR-R1P313 SPR-R1P313 BagN 28 Bumper Installation SPR-R1P313 Flat Head Screw SPR-R1P326 15

17 M Bag BagN 29 Rear Body Mount Installation M3x3 SPR-R1P316 BagK M3x3 SPR-R1P316 Button Head Screw Set Screw M3x3 SPR-R1P316 SPR-R1P316 SPR-R1A122 SPR-R1A122 Pin Radio Connections! All electronics shown are not included 540 type Electric Motor Fan 30 Antenna Receiver Electronic Speed Control Battery Steering Servo 16

18 BagE BagO 31 Steering Servo Assembly M32 BagK 6 SPR-R1P312 Button Head Screw M32 Not Included Flat Head Screw M3x6 Button Head Screw M3x6 Ball Stud 4.7x5 Ball Stud 4.7x5 M3x6 K- KO/ Sanwa 90 o SPR-R1P310 F- Futaba 32 Steering Servo Installation With steering in neutral position, make sure the steering rod is at a 90d angle as shown. Flat Head Screw M3x6 Adjust the steering linkage so that the tires point straight when the servo is centered. M3x6 17

19 BagN BagO 33 R/C Unit Installation SPR-R1P310 M32 Button Head Screw M32 x3 Flat Head Screw M3x6 SPR-R1P327 SPR-R1P313 Not Included M3x6 Not Included Not Included M3x6 34 Motor Installation Button Head Screw M32 Button Head Screw M32 6 Not Included Adjust motor position for smooth gear mesh. Use this for mounting the motor when a small spur gear is used. 18

20 Bag M BagO Battery Holder Installation BagK SPR-R1P310 Flat Head Screw SPR-R1B813 SPR-R1B813 SPR-R1P310 Bag M BagQ BagO 36 Battery Installation SRP-R1P303 SRP-R1A122 BagO BagN SPR025-NU Wheel Nut M4 50 Not Included Wheel Nut M4 SPR025-NU Wheel Nut M4 Not Included 50 Not Included Pin 20 Plastic Spacer 5x SRP-R1P303 SRP-R1A122 Not Included SPR025-NU Wheel Nut M4 SPR025-NU Wheel Nut M4 19

21 Body Clip x8 37 Body Installation SPR-R1B814 SPR-R1B814 Not Included SPR-R1B814 SPR-R1B814 Gear Ratio Spur Gear Gear Ratio=.9 Pinion Gear Gear Ratio Pinion Gear Spur Gear 79T 80T 81T 82T 83T 84T 85T 86T 87T 88T 89T 13T T T T T T T T T T T T T T T T

22 Note:

23 Setup Sheet Name:. Date:. Track:. Track Condition:. Event:. Lap Time:. Final Position:. Front Camber Angle /- Caster Angle Ride Height Front Diff Gear Spool Diff Oil #. Shocks Shock Oil #. Piston O-ring. A C Sway Bar Ø 1 Rebound. B D Wheel Hubs 3 2 Spring. F R Droop Spacer Length Rear Camber Angle /- Ride Height Rear Diff Oil #. Shocks Shock Oil #. Piston Shim Sway Bar Ø 1 O-ring. Rebound. A c E B D Wheel Hubs 3 2 Spring. Spacer Length F R Droop Chassis Tires F R Option F R Brand:. Compound:. 2 1 Steering Upper Brace Rear Separate Sus Mount Option Washer Insert:. Wheel:. Out/ In IN OUT F Option Standard Option Option Front Separate Sus Mount In Note:. IN R Option Others Motor:. Spur Gear:. Pinion Gear:. Battery:. ESC:. Body:. Wing:. Ver.1.0

24

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic

More information

ABC HOBBY ORIGINAL RADIO CONTROL CAR

ABC HOBBY ORIGINAL RADIO CONTROL CAR ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE

More information

DIFFERENTIAL STEERING RACK

DIFFERENTIAL STEERING RACK BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball

More information

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE

More information

New Generation Rear Wheel Drive

New Generation Rear Wheel Drive New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS

More information

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we

More information

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029

More information

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01 BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6

More information

carbon fiber before assembly. Sand glue to the edges and

carbon fiber before assembly. Sand glue to the edges and chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28

More information

SOARSEIKI.Co.,Ltd

SOARSEIKI.Co.,Ltd SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040

More information

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new

More information

BEFORE YOU START CUSTOMER SUPPORT

BEFORE YOU START CUSTOMER SUPPORT BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

1/10 Scale 4WD 200mm Gas Power Touring Car

1/10 Scale 4WD 200mm Gas Power Touring Car 1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed

More information

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to

More information

INTRODUCTION. S35-T Kit Features :

INTRODUCTION. S35-T Kit Features : INTRODUCTION The S35-T is a brand new SWORKz 1/8 nitro Truggy based on the SWORKz S35-3 nitro Buggy. The Evolution of the S35-T project is the result of SWORKz passion for racing and race development.

More information

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend

More information

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675 pr GT RACING FRONT RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims ()

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01 NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005

More information

INSTRUCTION MANUAL INSTRUCTION MANUAL

INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL INSTRUCTION MANUAL Thank you for purchasing Pro-Line s PRO-Fusion SC 4 4! For Over 35 years, Pro-Line has designed and manufactured the best RC products in the world. This 1:10 scale

More information

Item Number Item Name MSRP MAP

Item Number Item Name MSRP MAP Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL

More information

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW

More information

Assembly Manual. 1/10th Formula 1 Car

Assembly Manual. 1/10th Formula 1 Car Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp

More information

Assembly Diagrams-1 22 Shock Assembly Shock Lower Mount Ball Shock Bottom Mount 3. Shock Spring Retainer

Assembly Diagrams-1 22 Shock Assembly Shock Lower Mount Ball Shock Bottom Mount 3. Shock Spring Retainer Assembly Diagrams-1 Shock Assembly 3 4 5 7 8 9 10 11 13 15 1 1 14 1. Shock Lower Mount Ball 4.8. Shock Bottom Mount 3. Shock Spring Retainer(bottom) 4. Shock Spring 5. Shock Body Bush. Shock Seal(small)

More information

MR-4BCS Parts List (Updated 9/15/03)

MR-4BCS Parts List (Updated 9/15/03) 4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate

More information

BIND ST-TRIM TH-TRIM ST-D/R

BIND ST-TRIM TH-TRIM ST-D/R 4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint

More information

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED

More information

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909) OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of

More information

INSTRUCTION MANUAL SUPPLEMENTARY SHEET

INSTRUCTION MANUAL SUPPLEMENTARY SHEET INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.

More information

Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty:

Additional equipment and parts needed: Tools needed: Disclaimer: Warnings: Warranty: Introduction Thank you for purchasing the Tekno RC SCT410 1/10th Scale Electric 4WD Competition Short Course Truck. The SCT410 represents the state-of-the-art in 1/10th Electric Short Course technology.

More information

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and

More information

Assembly Manual. 1/10th World GT car

Assembly Manual. 1/10th World GT car Assembly Manual 1/10th World GT car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the

More information

Pinion Gear and Setscrew

Pinion Gear and Setscrew XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary

More information

PRO THE ULTIMATE RACING MACHINE

PRO THE ULTIMATE RACING MACHINE PRO1 2004 THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2004 PRO1 race car. All this data is based on what our factory engineers and drivers

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price Replacement Parts List Part Number Description Price 48 Pitch Pinion Gear, 12T...$4.99 LOSA4006 Antenna Tube and Set Screw...$1.50 LOSA4015 Battery Foam...$2.50 LOSA5224 Silicone Shock Oil, 30 wt, 2 oz...$3.99

More information

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown.

Install steering rack assembly to chassis using x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as shown. Install steering rack assembly to chassis using 2-4-40 x 3/8 stainless flat head socket screws and 2-6.4mm x 1.1mm blue aluminum spacers as Qty 2, 4-40 x 3/8 fhcs Qty 2, 6.4mm x 1.1mm blue aluminum spacer

More information

Replacement Parts List Part Number Description Price

Replacement Parts List Part Number Description Price TM Replacement Parts List Part Number Description Price LOSA1022 Front Axles for XX-T Wheels (GTX, NXT, XXX-T)...$6.00 LOSA1113 Front Shock Tower (Desert Truck)...$5.99 LOSA1118 Front Suspension Arms (Desert

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)

More information

E-Revo (Model 5603) Parts List

E-Revo (Model 5603) Parts List E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List E-Revo (Model 56036-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

Bigfoot (Model ) Parts List

Bigfoot (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

NOT INCLUDED CAR BATTERY TOOLS RECOMMENED(NOT INCLUDED) WHAT S IN THE BOX

NOT INCLUDED CAR BATTERY TOOLS RECOMMENED(NOT INCLUDED) WHAT S IN THE BOX DIMENSION SCALE : /8 HEIGHT : 80mm FRONT TYRE : ø85mm x 35mm(width) REAR TYRE : ø85mm x 40mm(width) LENGTH : 50mm WIDTH : 3mm WHEELBASE : 80mm CAR BATTERY NOT INCLUDED TOOLS RECOMMENED(NOT INCLUDED) WHAT

More information

PREBUIL UILT ASSEMBLY AND OPERATION MANUAL

PREBUIL UILT ASSEMBLY AND OPERATION MANUAL PREBUIL UILT Length: 15.2" [385mm] Width: 13" [330mm] Height: 5.8" [147mm] Weight: 3.3 lb [1500g] Wheelbase: 11.6" [295mm] Technical Support Information For technical assistance, contact: DuraTrax Product

More information

Bag 1. Bag 1. Center Pivot. Center Pivot

Bag 1. Bag 1. Center Pivot. Center Pivot 8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball

More information

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit.

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. INSTRUCTION MANUAL SUPPLEMENTARY SHEET Use this NT1 2013 Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. New and Improved Parts All of these parts are

More information

Bag 1. Bag 1. Center Pivot. 3 Center Pivot Cap. Center Pivot

Bag 1. Bag 1. Center Pivot. 3 Center Pivot Cap. Center Pivot Battle Axe 2.0 1:10th Oval Weapon from Team CRC Assembly Manual 0 2. e Ax s tle Win s! t rd Ba s + bi C. ow CR T.Q Sn 0 20 servo and saver not included Part # 100 Calandra Racing Concepts 6785 Martin Street

More information

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18

More information

Rustler 4X4 (Model ) Parts List

Rustler 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

INSTALLATION INSTRUCTION 88088

INSTALLATION INSTRUCTION 88088 INSTALLATION INSTRUCTION 88088 For Rancho Suspension Systems RS6588 & RS6589: FORD F-150 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev B IMPORTANT NOTES! WARNING:

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

... REQUIRED READING...

... REQUIRED READING... REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW! Within this kit you will find a race winning car with over 21 years worth of CUSTOM WORKS design

More information

E-Revo Brushless ( ) Parts List

E-Revo Brushless ( ) Parts List E-Revo Brushless (56087-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings &

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

PRO1 2001, THE ULTIMATE RACING MACHINE

PRO1 2001, THE ULTIMATE RACING MACHINE PRO1 2001, THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2001 PRO1 race car. All this data is based on what our factory engineers and drivers

More information

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The

More information

Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC #0928 ENFORCER GSX2 RACING KIT

Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC #0928 ENFORCER GSX2 RACING KIT #0928 ENFORCER GSX2 RACING KIT Manufactured By: CustomWorks RC Products LLC 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and

More information

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3 9279W AIR FILTER, 1/8 WHITE AN0747 FOAM FILTER (3), 1/8 PD1052 REAR BODY MOUNT PD1211 BODY SUPPORT SET 1/8 RG PD1242 1/8 CLUTCH BELL, 26MM 13T PD1795 TIRE W/FOAM RALLY, 1/8 PD1800 DIFFERENTIAL SET CENTER,

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

... REQUIRED READING...

... REQUIRED READING... REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW! Within this kit you will find a race winning car with over 21 years worth of CUSTOM WORKS design

More information

En Instruction Manual De Bauanleitung. Fr Manuel de montage

En Instruction Manual De Bauanleitung. Fr Manuel de montage En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087

More information

OWNER'S MANUAL 2000 & ROAR National Champion

OWNER'S MANUAL 2000 & ROAR National Champion 2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being

More information

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months

More information

KSKT RACING PRODUCTS

KSKT RACING PRODUCTS KSKT RACING PRODUCTS ''KSK-B'' SPEC RACING CHASSIS ASSEMBLY INSTRUCTIONS 'The Leader in SK Racing' 1 CHASSIS KIT FEATURES Black Carbon Fiber Chassis Components 2.5 mm Thick Main Chassis Battery mounting

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Calandra Racing Concepts

Calandra Racing Concepts Calandra Racing Concepts Carpet Knifeä Version 3 Assembly and Setup Manual Congratulations! You now own the best 1/12th scale car on the market today, the Carpet Knifeä Version 3. This completely new car

More information

:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Your new RC12R6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RCR6 Kit. Please take a moment to read through

More information

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear 1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958

More information

X-Maxx (Model ) Parts List

X-Maxx (Model ) Parts List X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

#0711 ROCKET PRO-COMP RACING KIT. Manufactured By: 760-B Crosspoint Drive Denver, NC

#0711 ROCKET PRO-COMP RACING KIT. Manufactured By: 760-B Crosspoint Drive Denver, NC #0711 ROCKET PRO-COMP RACING KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing

More information

#0710 ELECTRIC ROCKET KIT

#0710 ELECTRIC ROCKET KIT #0710 ELECTRIC ROCKET KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the

More information

Telluride 4X4 (Model ) Parts List

Telluride 4X4 (Model ) Parts List Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

INSTALLATION INSTRUCTIONS 88518

INSTALLATION INSTRUCTIONS 88518 INSTALLATION INSTRUCTIONS 88518 For Rancho Suspension Systems RS6518: 2009 FORD F-150 4WD READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION Rev A IMPORTANT NOTES! WARNING:

More information

INSTRUCTION MANUAL AX90053-I001

INSTRUCTION MANUAL AX90053-I001 INSTRUCTION MANUAL AX90053-I001 2 3 AX80018 Hardware Parts Tree AX80006 Servo Set x3 AX31301 10mm Shock Caps Parts Tree (Blue) AX80069 AX31300 10mm Shock Parts Tree 2 (Blue) AX31114 WB8 Driveshaft AX80033

More information

INSTALLATION INSTRUCTION Rev A

INSTALLATION INSTRUCTION Rev A INSTALLATION INSTRUCTION 88587 Rev A FOR RANCHO SUSPENSION SYSTEM RS6587B: 2009 DODGE RAM 1500 READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING:

More information

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1 ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following

More information

Make these adjustments before racing

Make these adjustments before racing FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these

More information

PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK

PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK 1/8 4WD NITRO MONSTER TRUCK Features High power and reliable.21 size engine that has two different starting methods (pull start

More information

#0926 ENFORCER G6 DIRECT DRIVE RACING KIT

#0926 ENFORCER G6 DIRECT DRIVE RACING KIT #0926 ENFORCER G6 DIRECT DRIVE RACING KIT Manufactured By: 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing

More information

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are

More information

Revo with TRX 2.5R Parts List

Revo with TRX 2.5R Parts List Revo with TRX 2.5R Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air Filters 5264 Air

More information

#0715 NITRO ROCKET KIT

#0715 NITRO ROCKET KIT #0715 NITRO ROCKET KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the ROCKET!

More information

TOOLS NEEDED TO BUILD THIS KIT

TOOLS NEEDED TO BUILD THIS KIT TOOLS TOOLS NEEDED TO BUILD THIS KIT 1. ALLEN WRENCHES A..050" B. 1/16" C. 5/64" D. 3/32" E. 2.5mm 2. NUT DRIVERS A. 3/16" B. 1/4" C. 11/32" 3. MISC. TOOLS A. NEEDLE NOSE PLIERS B. THREAD LOCKING COMPOUND

More information

#0923 ENFORCER GBX3 RACING KIT. Manufactured By: 760-B Crosspoint Drive Denver, NC

#0923 ENFORCER GBX3 RACING KIT. Manufactured By: 760-B Crosspoint Drive Denver, NC #0923 ENFORCER GBX3 RACING KIT Manufactured By: 760-B Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing

More information

Slayer Pro 4X4 (Model ) Parts List

Slayer Pro 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slayer Pro 4X4 (Model 59076-3) Parts List Air Filters 5262 Air filter and pre-filter

More information

TIPS TO FINAL ASSEMBLY Radio installation. The Electronic speed control (ESC) and the receiver need to be mounted onto the chassis, using double sided

TIPS TO FINAL ASSEMBLY Radio installation. The Electronic speed control (ESC) and the receiver need to be mounted onto the chassis, using double sided TIPS TO FINAL ASSEMBLY Radio installation. The Electronic speed control (ESC) and the receiver need to be mounted onto the chassis, using double sided tape (not supplied.) Mount the ESC first on the chassis

More information

ROLL CENTER You can adjust the front and rear roll centers of the XB8 by changing the mounting locations of various components.

ROLL CENTER You can adjust the front and rear roll centers of the XB8 by changing the mounting locations of various components. Your XRAY XB8 luxury nitro buggy is a top competition, precision racing machine that features multiple adjustments that allow you to set up for any track condition. The XB8 includes innovative set-up features

More information

for the B3 Sport kit #9013

for the B3 Sport kit #9013 All kit versions include: 2.40:1 transmission for effortless power handling. Molded composite chassis for better rigidity and Lexan B3 racing body. Quadra-symmetric suspension for greater stability and

More information

Suspension System RS6582B

Suspension System RS6582B Suspension System RS6582B Tahoe/Yukon READ ALL INSTRUCTIONS THOROUGHLY FROM START TO FINISH BEFORE BEGINNING INSTALLATION IMPORTANT NOTES! WARNING: This suspension system will enhance the off-road performance

More information

Revo 3.3 (53097) Parts List

Revo 3.3 (53097) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Revo 3.3 (53097) Parts List Air Filters 5262 Air

More information

Manufactured By: #0723 OUTLAW 3-SHOT RACING KIT. 760 Crosspoint Drive Denver, NC

Manufactured By: #0723 OUTLAW 3-SHOT RACING KIT. 760 Crosspoint Drive Denver, NC Manufactured By: #0723 OUTLAW 3-SHOT RACING KIT 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW

More information

Manufactured By: #0925 ENFORCER G6 GEARBOX RACING KIT. 760 Crosspoint Drive Denver, NC

Manufactured By: #0925 ENFORCER G6 GEARBOX RACING KIT. 760 Crosspoint Drive Denver, NC Manufactured By: #0925 ENFORCER G6 GEARBO RACING KIT 760 Crosspoint Drive Denver, NC 28037 www.customworksrc.com REQUIRED READING...UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the

More information

PARTS CATALOG FOR UNO F1 RTR CAR

PARTS CATALOG FOR UNO F1 RTR CAR PARTS CATALOG FOR UNO F1 RTR CAR No.6716 1/10th Scale 2WD NITRO POWERED 2WD FORMULAR 1 CAR F1 UNO SPORT ARTR/RTR PARTS LIST PD1657 FR HEX DRIVE BUSHING PD0140 CLUTCH SHOES PD0270 CLUTCH BELL BAG / 4T

More information

NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty.

NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty. OWNER'S MANUAL NOTE: Using hot modified motors exceed the capacity of the electronic speed control and voids any warranty. Carefully read through all instructions to familiarize yourself with the parts,

More information