=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way

Size: px
Start display at page:

Download "=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01. R Front One Way Cup (2) R Front One Way"

Transcription

1 NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005 Alu-Bulkhead-R R8000 Downstop Nut Holder () R0505 x8 Round Screw R050 x6 Flat Screw R x8 Set R Ring Clip (6) R8004 Bearing Bushing - One Way () BAG 0 R80040 Servo Saver Base Post R80400 Belt 0 R8000 Chassis R80600 x8x4 x6 Round Screw R8050 4x8 Flat Screw BAG 0 R80 Pulley Set- R8004 Bearing Bushing -Middle Shaft () R80007 Middle Shaft Block R8050 4x6 Round Screw R E-Clip 5 (6) R800 Middle Shaft R80600 Ø.5x.8 Pin (6) R80 Pulley Set-Middle R xx5 Ball Bearing () 0

2 R800 Servo Saver Tower R80008 Servo Saver Alu R80700 Servo Saver Spring R8008 Ackermen Adjustment Shims () 0/+.5 R80800 Ackermen Plate 8.5 Carbon x6 Round Screw R0600 5x8x.5 Ball Bearing () 4 BAG 0 R8007 Upper Arm () R800 Upper Arm Pin x49 () R800 Suspension Bracket Insert-Open (8) Default BAG 0 Upper Arm Short R80094 Spacer ++ When track High Traction or want to reduce steering Default Setup When track Low Traction or want to increase steering R0540 x Set Upper Arm Medium R80090 Ball End 5.8 Short () R8005 Anti Roll Bar Ball Screw () R8004 Anti Roll Bar Ball Head () R8004 Shock Mount S () R8005 Low Arm Set x6 Round Screw R0505 x8 Round Screw R050 x5 Cap Screw R0505 R0505 BAG 0 R80055 Steering Block R Ball End Long () R80045 Steering Plate () R8006 CVD Shaft () R8006 Wheel Axle () x6 Round Screw R0540 x Set R80600 Ø.5x.8 Pin (6) R8060 Øx9.8 Pin (6) Upper Arm Long BAG 0 R80600 R x Round Screw R8050 4x8 Round Screw R800(Optional) Low Arm Holder (4) R800 Low Arm Holder + (4) R8050 R80006 Upper Arm Bracket R800 Low Arm Pin x77.8 BAG 0 R80094 Spacer // R800 Tire Hook () R Tire Hook Spring (4) R80064 CVD Insert () R Ball End Nut (4) R80600 x8x4 R8005.x5x R R800 R80504 R8006 Ball Head 4.9 (4) R0070 Ball Joint 4.9 Open (4) R8005 X6 Rod () BAG 0 R800 Default Setup R800 (Optional) Low Arm Long R8004 (Optional) Shock Mount L R800 Low Arm Short R8004 Can increase steering best for low traction track. 0 0

3 BAG 0 BAG 0 R80500 x5 Flat Screw R80 Pulley Set- R8040 Belt 0-8 x6 Round Screw R8000 Solid Axle R80040 Excenter Bushing Solid Axle () R C Clip (6) Default Position R80060 Low Arm Brackets RF R800 Bulkhead Low R8004 Suspension Bracket Insert-Closed (8) R8050 4x8 Flat Screw R0504 x8 Flat Screw R8060 Øx9.8 Pin (6) R80600 x8x BAG 0 HIGH Roll Center R80800 Shock Tower Default R0505 x8 Round Screw STANDARD Roll Center R8050 LOW Roll Center R0504 BAG 0 BAG 0 R Upper Link Plate R800 Anti Roll Bar Stopper () R80046 Anti-Roll Bar Bushing - () R0600 5x8x.5 R80800 Shock Tower R0540 x Set R800 Bulkhead Upper To Adjust belt tension R80705 Anti-Roll Bar. R0504 x8 Flat Screw R0506 x0 Round Screw Tighten Loosen 04 05

4 BAG 0 Step 5 BAG 04 R8000 Low Arm R8006 Low Arm Brackets RR R0505 R8009 Upper Arm Set.0 Hex Pre-Assemble R8004 Suspension Bracket Insert-Closed (8) R80044 Shock Mount S () R800 Low Arm Pin () x6 Round Screw R0505 x8 Round Screw R8050 4x8 Flat Screw R x0 Set R0505 R8004 Ball Head 6.8 () R8007 4x7 Turnbuckle () R800 Suspension Bracket Insert-Open (8) R8008 Upper Arm Pin x.5 () R0540 x Set Step Use.5 Steel bar to turn the turnbuckle PS:DO NOT OVER TIGHT E UPPER ARM BY.0 HEX TOOL Short Upper Link Default Setup Long Upper Link R8070 Anti-Roll Bar.6 R80047 Anti-Roll Bar Bushing - () R800 Anti-Roll Bar Stopper () R8009 Anti-Roll Bar Adj Screw () R8009 Anti-Roll Bar Ball End () Default HIGH STANDARD LOW Roll Center Roll Center Roll Center Assemble only this way. R8050 R0540 BAG 0 R0505 R800 Tire Hook () R Tire Hook Spring (4) R Ball End Nut (4) R Ball End Short () R80050.x5x0. R80050 Upright R80060 Wheel Axle () R8004 Excenter Upright Bushing + (x4) +0 (x4) R80600 x8x4 Up ECCENTER HUB Center (Default Setup) R (x4) Low R8060 R (x) R BAG 04 6 R8006 Ball Head 4.9 (4) R0070 Ball Joint 4.9 Open (4) R800 Anti-Roll Bar Tool Use R800 to adjust rear anti roll bar balance. R8005.x5x0.5 R0540 x Set R8060 Øx0.8 Pin (6) R x6 Set Screw (0) BAG 04 R0600 5x8x.5 Ball Bearing () R8008() R8008() R0540 x Set 4x4 Set Set the angle of the roll bar ball end as above. Centre the anti roll bar so that the spacing is equal on both sides. R80070 Body Mount Arm () R8006 Drive Shaft () R0007 Steering Block Bushing (4) R8008 x7x Shims () x7x Shims () R0506 x0 Round Screw 06 07

5 BAG 04 R80600 R8007 R0540 Body Mount R R800 Speed Adaptor R800 Speed Shaft Body Mount Plate R8004 R8070 Body Mount Nut Speed Spring Set R R8060 R8009 Body Mount Pin x9.5 () Speed Shoes () Initial setup 5.5 R0509 R0505 x6 Round Screw Note: By tightening the screws, the speed clutch will engage later, while loosening the screws will make the speed clutch engage earlier. R0540 R0505 x8 Round Screw R80600 Ø.5x.8 Pin (6) R E-Clip 7 (6) R0540 x Set R8060 Ø5x4.9 Pin (6) R0550 Nylon Nut R0509 R80054 Brake Adaptor R0540 x4 Set R80 Pulley Set- R0504 R8005 Pulley Set-Meddle x8 Flat Screw -Speed Shaft Bracket R R R0505 R8004 R80008 x0 Flat Screw -Speed Shaft Bracket L R800 Brake Disk R0600 Brake Cam R x8x.5 Ball Bearing () 4x4 Set R80045 R80005 Bearing Bushing -Main Shaft () Brake Pad () R8070 R80 Brake Spring () R806 Øx.8 Pin (6) R8060 8x4x4 Ball Bearing () R80007 Brake Pad Nut () R E-Clip 7 (6) R E-Clip 9 (6) R0505 R0504 R8060 R Speed Shaft Deck R0600 R8005 -Speed Bell Housing R8005 -Speed Spur Adaptor R80500 x5 Flat Screw R xx.5 Ball Bearing () R80405 st Spur 6T Spear parts R80405 st Spur 6T R nd Spur 57T Option parts R0600 5x8x.5 Ball Bearing () R nd Spur 58T R050 x6 Flat Screw R st Spur 60T R80405 nd Spur 56T 08 09

6 R800 Center Bulkhead R80050 Belt Tensioner Shaft () R Belt Tensioner Plate R8040 Middle Belt 45 R8070 Rollover Bar R R0509 R040 Shock Pistion X Hole (4) R040 Shock Pistion X Hole (4) R00 Shock Shaft () R0008 Shock Cap Alu () R040 O ring x R04007 Shock Membrance R0068 Shock Body Long R040 Shock Shaft Shim (4) BAG 06 R x0x4 Ball Bearing () 4x4 Set R0504 x8 Flat Screw x6 Round Screw R0509 x6 Round Screw R0040 Shock Ball Joint Set R0009 Shock Low Cap Alu () R000 Shock ADJ Nut Alu () R0400 O ring x R0040 Shock Ball Joint Set R0550 E-Clip (0) #500 BAG 06 BAG 06 R007 FRONT REAR R0040 Shock Ball Joint Set R007 R007 R80060 R 8.0 Bumper/Body Tower Set R Ball End (4) R R Ball End Short (4) R R8050 4x8 Round Screw R80705 Shock Spring (Yellow) R007 R8050 4x Flat Screw R007 R0009 R80706 Shock Spring (Blue) R0009 Short Ball End Long Ball End 0

7 BAG 06 R0400 R8009 R8005 R O ring x (4) Fuel Tank Mount () Upper Deck Insert () R Clip (0) x6 Round Screw R0505 R8000 x8 Round Screw Fuel Tank x6 Round Screw R80504 R8000 Servo Mount R0505 R0505 Servo Not Included R80800 Not Upper Deck Not R0505 x8 Round Screw R0507 x Round Screw R Suggested Servo wire layout R80805 Battery Mount Carbon R8009 Ball End 4.9 Short () R8006 Ball Head 4.9 (4) R8004 R80500 x5 Flat Screw R8040 Tope the receiver battery disrettly to the battery mount Rubber Groet R0450 Antenna X 5 Turnbuckle () R0060 Servo Horn Dual Steering Arm R80505 x8 Flat Screw R80080 Radio Box R8008 Radio Box x6 Round Screw Cut R8040 Receiver Not Included NiMH/Lipo Receiver Battery (Not Included)

8 R800 Engine Mount () R80004 Fly Wheel Nut R8000 Fly Wheel Spring Base Clutch Pad Yellow 4 Sink Shims Alu R80504 Spring.0 Countersunk shims Alu. x R80006 Clutch Fly Weight Clutch Pad Base R8005 R80700 R80400 R8000 R8000 R80400 Clutch Spring Nut R8050 4x8 Flat Screw Step Step Pin Pin Cut the fly weight. R8000 x6 Round Screw Pin Install the clutch fly weights into the fly wheel as pictured above. R80080 (4T) Clutch Bearing Nut R8005(X) R8000 R8060 R80054(X) Clutch Bell R80070 st Gear Pinion 9T R80080 R Step Engine Not Included Step Push 5x8x4 Thrust Bearing Exhaust Pipe Spring 4x4 Set Step R8060 R8070 R80070 (9T) nd Gear Pinion 4T Pull R x0x4 Ball Bearing (Metal Seal) () Pipe Not Included R8005 5x8x0. R x8x0. R ~0.9 CBA (A C)-(A B)=0.6~0.7MM Use 0. to break-in the clutch pad bell, after break-in setup into 0.6~0.9 during race. Adjust the Cluch Gap B~C by add / remove R80054 Shims and set the cleance of gap into 0.6. x After step finished,add the distance shims (0.6~0.7) back to shaft to keep clutch bell not touch the pad. R80405 Fuel Tube 90cm R80057 Break Lever R80405 Fuel Tube R Throttle Linkage () R0006 Collar Alu R8000 Throttle Servo Horn Set Tire Not Included R x8 R0540 x Set 4 5

9 DEFAULT SETUP SHEET RACE TRACK NAME CITY / COUNTRY DATE Default Setup DISK FRONT BODY TOWER AIR TEMPERATURE Yes No REAR UPRIGHT SHIMS Yes No STER DISK TRACK SEC TRACTION LOW MIXED ECCENTER HUB FAST MEDIUM WHEEL BASE HIGH AR RATIO CHART Spur Spur st Pinion 60 st 9T nd 4T HOLE HOLE 500 CST SHOCK PISTON HOLE SIZE SPRING HOLE OIL HOLE 500 CST SPRING Blue TIRE Left Right Tire Shore Left Right 5 5 Left Right Left Tire RIDE HEIGHT 8 FRONT Yellow Right LOW FRONT UPPER ARM REAR DOWN STOP RIDE HEIGHT T nd 4T CST MBER Upper Arm Long.5 WHEEL SHIMS 7.6 HOLE HOLE Engine Plug Fuel WING NOVA VIRTUS C8TGH TORNANDO Spring Load STEEL FRONT 7.5 HOLE OIL HOLE Tire Shore DOWN STOP Upper Arm Medium CST WHEEL SHIMS Left Right Right RIDE HEIGHT DOWN STOP Left Tire REAR Upper Arm Short SPRING TIRE FRONT UPPER ARM RIDE HEIGHT MBER MBER Upper Arm Long WHEEL SHIMS Tire Additive REAR UPPER LINK R8004 R8004 R800 6 R800 LONG OUT IN SHORT R8004 R FRONT ANTI-ROLL BAR.6. R800 REAR ROLL CENTER REAR UPPER LINK R800 FRONT TOE REAR TOE.5 REAR ANTI-ROLL BAR BODY MOUNT DISTANCE Standard Cut FRONT TOE REAR TOE Bumper IN REAR ANTI-ROLL BAR BODY WING EFRA 05 Carb Dia 8.5 Head Shims 0.7 Pipe Engine Pipe Plug Carb Dia Fuel Head Shims OUT IN FRONT ANTI-ROLL BAR ENGINE CLUTCH Clutch Bell 58 HOLE SIZE BODY IN ENGINE 57 SHOCK PISTON Right REAR ROLL CENTER Left + HIGH BUMP STEER Right +0 WHEEL BASE Spur nd 6 SHOCK Left SHORT 6 SPRING 60 Upper Arm Medium WHEEL MBER SHIMS 0.8 st OIL DOWN STOP LONG 4 TS00 ECCENTER HUB FAST MEDIUM Spur st Pinion Upper Arm Short MIXED AR RATIO CHART BODY MOUNT DISTANCE Standard Cut Yes No MIN TECHNIL TRACTION BODY Bumper REAR UPRIGHT SHIMS Yes No STER DISK TRACK SEC Tire Additive BODY AIR Spur SHOCK OIL TRACK CONDITION BUMP STEER Spur nd 6 DISK FRONT BODY TOWER QUALIFYING BEST LAPTIME FINAL POSITION RACE LENG POSITION MIN TECHNIL RACE TRACK NAME CITY / COUNTRY DATE TEMPERATURE QUALIFYING BEST LAPTIME FINAL POSITION RACE LENG POSITION TRACK CONDITION R8.0 SETUP SHEET CLUTCH YELLOW Bell Clearance 0.6 Clutch Shoes Clutch Bell Spring Load NOTE Clutch Shoes Bell Clearance NOTE UPPER DECK TRACK WID 65 FIX FLEX UPPER DECK ACKERMAN TRACK WID 54 TRACK WID FIX FLEX ACKERMAN TRACK WID

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG 01 NOTE : =Apply Thread lock adhesive R80059 One Way Cup R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 =Apply Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic Shims () R80005

More information

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering

=Apply Thread lock adhesive. =Apply CA Glue =Apply Grease NOTE : BAG 01 BAG 01 BAG mm. When track High Traction or want to reduce steering NOTE : =Apply Thread lock adhesive R80059 One Way Cup () R8009 One Way R80 Pulley Set- R80004 Alu-Bulkhead-L BAG 0 CA GE =Apply CA Glue =Apply Grease R8000 Upper Arm Bracket Base R8004 One Way Plastic

More information

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT

INFINITY 1/8 ONROAD KIT SPARE & OPTIONAL PARTS FRONT BODY MOUNT PLATE FRONT SUSPENSION ARM REAR UPPER ARM HOLDER SET SERVO SAVER SET FRONT UPRIGHT Tabella 1 Code CM-00001 Code R0001 R0002 R0003 R0004 R0005 R0006 R0007 R0008 R0009 R0010 R0011 R0012 R0013 R0014 R0015 R0016 R0017 R0018 R0019 R0020 R0021 R0022 R0023 R0024 R0025 R0026 R0027 R0028 R0029

More information

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01

R R11 Eccentric Hub-Alu (4) R R11 Eccentric Hub-Alu (4) NOTICE. Pulley cover direction NOTICE BAG 01 NOTICE BAG 01 BAG BAG R Spool Axle Alu RA Front Spool Pulley Set 8T (4pcs) R Diff Gears (with Axle) Trim any excess flashing from the diff gear axle at the mold injection point. (pcs) (4pcs) R Spool Outdrive (pcs) R6

More information

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet.

along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Use this XT2 Dirt Conversion Supplementary Sheet along with standard XT2 Instruction Manual and also XT2 18 Supplementary Sheet. Parts included in Bag 8: 303141 SHIM 3x5x1.0MM (10) 322111 XT2 COMPOSITE

More information

1/10 Scale 4WD 200mm Gas Power Touring Car

1/10 Scale 4WD 200mm Gas Power Touring Car 1/10 Scale 4WD 200 Gas Power Touring Car STS PRO 10 Instruction Manual DIMENSIONS Length: 390 Width: 200 Height: 120 Weight (ready to run): About 1800g DRIVETRAIN Type: 3-belt 4WD Transmission: 2-speed

More information

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit.

Use this NT Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. INSTRUCTION MANUAL SUPPLEMENTARY SHEET Use this NT1 2013 Supplementary Instruction Sheet along with the standard NT1 Instruction Manual included in the kit. New and Improved Parts All of these parts are

More information

SOARSEIKI.Co.,Ltd

SOARSEIKI.Co.,Ltd SOARSEIKI.Co.,Ltd info@soarseiki.com 1 2 3 4 BAGS A1 FRONT AND REAR DIFF 5 BAGS A2 CENTER DIFF 5 BAGS B1 FRONT TRANSMISSION STEP B1-1 Apply a thiin layer of lubricant on the gear. GR160003 BE050110040

More information

New Generation Rear Wheel Drive

New Generation Rear Wheel Drive New Generation Rear Wheel Drive ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. REAR 2 WHEEL DRIVE REAR MOUNTED MOTOR BELT DRIVE DOUBLE DECK CHASSIS

More information

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675" pr GT RACING FRONT

7207 FRONT BULKHEAD, nylon FRONT BULKHEAD ALUMINUM SUPPORT HINGE PIN, inner, with clips, 1.675 pr GT RACING FRONT RC10GT & RTR GT MC 9 McCOY GLOW PLUG 1 3.9 2661 CLUTCH NUT CLIPS 6.7 3216 WASHER, #4 12 1.00 3719 NYLON WIRE TIES, 6" heavy duty 12 2.00 3720 NYLON TIES, 8", light duty for receiver 12 2.00 3721 SELF-TAPPING

More information

DIFFERENTIAL STEERING RACK

DIFFERENTIAL STEERING RACK BAG-A DIFFERENTIAL (2 Sets) +Driver Cap Screw Diff Ball Nylon Nut Thrust Washer Thrust Ball Diff Joint Cup A Allen Wrench 850 Bearing Diff Ring Diff Spring Nylon Nut 850 Bearing Diff Ring Diff Ball Ball

More information

TITAN CATALOG 2013 HEX WRENCH & TOOLS RACING EQUIPMENT

TITAN CATALOG 2013 HEX WRENCH & TOOLS RACING EQUIPMENT HEX WRENCH & TOOLS 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 11015 11020 11320

More information

Assembly Diagrams-1 22 Shock Assembly Shock Lower Mount Ball Shock Bottom Mount 3. Shock Spring Retainer

Assembly Diagrams-1 22 Shock Assembly Shock Lower Mount Ball Shock Bottom Mount 3. Shock Spring Retainer Assembly Diagrams-1 Shock Assembly 3 4 5 7 8 9 10 11 13 15 1 1 14 1. Shock Lower Mount Ball 4.8. Shock Bottom Mount 3. Shock Spring Retainer(bottom) 4. Shock Spring 5. Shock Body Bush. Shock Seal(small)

More information

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES

1:8 SCALE CATALOG 1:8 GAS KITS RC500 FRONT END BODY ACCESSORIES 1:8 SCALE CATALOG Stock is extremely limited. Parts listing as of 7/2001. Sale prices apply to orders direct from Associated only. Items available while supplies last. Items marked Not available or are

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE The Serpent 966 is the next evolution of Serpent s hugely-successful 960 lineage, combining ultimate performance into a single package. The Serpent 966 was designed

More information

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL

E Thank you for purchasing VBC Racing product. COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION FORMULA CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we

More information

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits

XRAY KITS M18 M18T M18MT PARTS NT18 NT18T NT18MT PARTS. o = option part x = standard included / fits PRO LiPo PRO USE THE DROP MENU TO FILTER THE SELECTION XRAY KITS o = option part x = standard included / fits 38 0000 XRAY - 4WD SHAFT DRIVE 1/18 MICRO CAR 38 0003 XRAY PRO LiPo - 4WD SHAFT DRIVE 1/18

More information

ABC HOBBY ORIGINAL RADIO CONTROL CAR

ABC HOBBY ORIGINAL RADIO CONTROL CAR ABC HOBBY ORIGINAL RADIO CONTROL CAR Instruction Manual Study the instructions thoroughly before assembly. FRONT WHEEL DRIVE NEW STYLE STRUT SUSPENSION BATHTUB CHASSIS 4 BEVEL GEAR DIFFERENTIAL FULL ADJUSTABLE

More information

1:10 SCALE 200mm 4WD GAS ON-ROAD. Reference Guide

1:10 SCALE 200mm 4WD GAS ON-ROAD. Reference Guide 1:10 SCALE 200mm 4WD GAS ON-ROAD Reference Guide Introduction Parts list and Exploded views The parts list and the exploded views for the Serpent 705 are separate from the Instruction manual. The exploded

More information

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan

Contents. Symbols Used. Equipment Required L=R. Page. Apply Thread Lock. Apply. Silicone Oil. 30mm Fan Contents Content Page Content Page Content Page 0. Tool and Accessories 1.Filing the Edges of the Chassis 2.Bulkhead Installation 3.Spur Gear Assembly 4.Front Spool Assembly 5.Gear Differential Assembly

More information

IMP4CT 4wd buggy by Elcon Models

IMP4CT 4wd buggy by Elcon Models IMP4CT 4wd buggy by Elcon Models 1 Content Introduction... 3 Rear Assembly... 4 Front assembly... 15 Mid section assembly... 18 2 Introduction Welcome and thank you for choosing the Elcon Models IMP4CT

More information

Make these adjustments before racing

Make these adjustments before racing FINAL ADJUSTMENTS ADJUSTING CAMBER To set the camber we recommend using our supplied #1719 camber/rear toe-in gauge. When adjusting camber you need to have the car ready to run with no body. Make these

More information

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3

1/8 RG PD1871 TRANS CASE/BULK HEAD SET,S3 PD1875 UNIV. REBUILD KIT,S3 PD1876 CLUTCH SHOE (3), 1/8 PD1877 FR SHOCK SET(2),S3 9279W AIR FILTER, 1/8 WHITE AN0747 FOAM FILTER (3), 1/8 PD1052 REAR BODY MOUNT PD1211 BODY SUPPORT SET 1/8 RG PD1242 1/8 CLUTCH BELL, 26MM 13T PD1795 TIRE W/FOAM RALLY, 1/8 PD1800 DIFFERENTIAL SET CENTER,

More information

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm

TP02C. 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy. Dimensions. Length 410mm Width 250mm Height 150mm TP02C 1:10 Scale Radio Controlled Electric Powered 2WD Racing Buggy Dimensions Length 410mm Width 250mm Height 150mm Transmitter Preparation Power Switch Antenna 27MHzTransmitter Crystal T 27MHz ON Extend

More information

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions):

:: Additional Features Your new TC6 comes unassembled and requires the following items for completion. (refer to catalog section for suggestions): 8/10 2 :: Introduction Thank you for purchasing this Team Associated product. This assembly manual contains instructions and tips for building and maintaining your new RC10TC6. Please take a moment to

More information

Rustler 4X4 (Model ) Parts List

Rustler 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler 4X4 (Model 67064-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

TITAN CATALOG 2015 HEX WRENCH & TOOLS RACING EQUIPMENT

TITAN CATALOG 2015 HEX WRENCH & TOOLS RACING EQUIPMENT HEX WRENCH & TOOLS 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 11015 11020 11320 11401 11501 11101 11645 11830 12025 12325 12030 12402 12655 12700 12770 12835 12840 13402 13502 13670

More information

X-Maxx (Model ) Parts List

X-Maxx (Model ) Parts List X-Maxx (Model 77076-4) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/10 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

Pinion Gear and Setscrew

Pinion Gear and Setscrew XRAY T1 Factory Kit 2005 The new XRAY T1 Factory Kit '05 (T1FK'05) is the 5th generation of XRAY's extremely successful T1 family of 1/10-scale on -road electric touring cars. The T1FK'05 is a large evolutionary

More information

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear

ASSEMBLY OF THE FRONT AND REAR BALL DIFF. Builds two differentials for front and rear 1 ASSEMBLY OF THE FRONT AND REAR BALL DIFF. 37145 40060 40060 2.6mm Nylon Nut 37110 35958 37132 2.6x6x1mm Washer 37148 Apply Grease 37120 (12 Pcs) Builds two differentials for front and rear. 38288 35958

More information

SUSPENSION PARTS LOSB2002 F/R Suspension Arms (pr)(lst2)... $10.00 LOSB2102 Steering Bell Cranks, Shafts, & Chassis Braces (LST/2)... $7.00 LOSB2104 Front Spindles & Carriers (LST2)... $7.00 LOSB2106 Rear

More information

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA

BEFORE YOU START. XRAY Europe K Výstavisku 6992, Trenčín Slovakia EUROPE. XRAY USA RC America, 2030 Century Center Blvd #15 Irving, TX USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

BEFORE YOU START CUSTOMER SUPPORT

BEFORE YOU START CUSTOMER SUPPORT BEFORE YOU START The X10 is a high-quality, 1/10-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied

General Building Tips: A Good Dealer Is Extremely Important!! 1 Additional Items Needed For Operation. Tools Supplied Owner s Manual Thank you for choosing the Team Magic E4JR. The E4JR includes a large selection of the important specialty parts when compared to the previous versions. Before you start building your new

More information

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN

Shown with optional GFR-1017R Body Posts. J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN Shown with optional GFR-1017R Body Posts J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The

More information

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL

1/8TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL /8TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION The Serpent 960 is the next evolution of Serpent s hugely-successful 90 lineage, combining ultimate performance into a single package. The

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE INTRODUCTION Serpent enters the small scale competition market with the S40, which like all our previous cars, has been designed to perform straight from the box. Made

More information

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909)

OWNER'S MANUAL Magnolia Ave., Chino, CA phone: (909) fax: (909) OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being able to grasp the overall design of

More information

carbon fiber before assembly. Sand glue to the edges and

carbon fiber before assembly. Sand glue to the edges and chassis and carbon fiber give you a before assembly. Sand glue to the edges and 5 BAG MARKED CA BAG MARKED M3x6 Flathead 4 03 4 05 BAG MARKED 2 10 13 Installing Steering System Shock Assembly M4x28

More information

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT

INSTRUCTIONS MANUAL COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT COMPETITION GRADE HIGH PERFORMANCE RADIO CONTROL RACING CAR CHASSIS KIT 1/12 SCALE ELECTRIC COMPETITION CAR KIT INSTRUCTIONS MANUAL E Thank you for purchasing VBC Racing product. Things that we should

More information

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034

J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 J & D Machine / Hyperdrive / MSA 3711 Moon Bend Rd. Chapel Hill, TN 37034 www.hyperdriveracing.com 1 You now own a state of the art 1/10 scale oval race car. The Hyperdrive Assault has gone through months

More information

PARTS CATALOG FOR UNO F1 RTR CAR

PARTS CATALOG FOR UNO F1 RTR CAR PARTS CATALOG FOR UNO F1 RTR CAR No.6716 1/10th Scale 2WD NITRO POWERED 2WD FORMULAR 1 CAR F1 UNO SPORT ARTR/RTR PARTS LIST PD1657 FR HEX DRIVE BUSHING PD0140 CLUTCH SHOES PD0270 CLUTCH BELL BAG / 4T

More information

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA

BEFORE YOU START. XRAY USA RCAmerica, 167 Turtle Creek Boulevard Suite C Dallas, Texas 75207, USA BEFORE YOU START The X12 is a high-quality, 1/12-pan car intended for persons aged 16 years and older with previous experience building and operating RC model racing cars. This is not a toy; it is a precision

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

2103 NITRO RAIL DRAGSTER KIT

2103 NITRO RAIL DRAGSTER KIT 203 NITRO RAIL DRAGSTER KIT THANKS FOR BUYING RJ SPEED S NITRO DRAG KIT. IT IS A LITEWEIGHT CAR MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS AT HIGH SPEED. YOU WILL NEED

More information

2101 NITRO PRO STOCK DRAG KIT 2104 NITRO PRO MOD DRAG KIT

2101 NITRO PRO STOCK DRAG KIT 2104 NITRO PRO MOD DRAG KIT 2101 NITRO PRO STOCK DRAG KIT 2104 NITRO PRO MOD DRAG KIT THANKS FOR BUYING RJ SPEED S NITRO DRAG KIT. IT IS A LITEWEIGHT CAR MADE FOR STRAIGHT LINE DRAG RACING AND CAN BE BROKEN IF RUN INTO SOLID OBJECTS

More information

Telluride 4X4 (Model ) Parts List

Telluride 4X4 (Model ) Parts List Telluride 4X4 (Model 67044-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings

More information

Maverick Number Maverick Description X REF MV12401 Maverick Blackout MT 1/5 Scale 4WD Petrol Monster Truck RTR XXX MV24000 Main Chassis Plate

Maverick Number Maverick Description X REF MV12401 Maverick Blackout MT 1/5 Scale 4WD Petrol Monster Truck RTR XXX MV24000 Main Chassis Plate Maverick Number Maverick Description X REF MV12401 Maverick Blackout MT 1/5 Scale 4WD Petrol Monster Truck RTR XXX MV24000 Main Chassis Plate (Blackout MT) STD MV24001 Front Shock Absorber 2 Pcs (Blackout

More information

1/10TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL

1/10TH SCALE 4WD COMPETITION CAR INSTRUCTION MANUAL /0TH SCALE WD COMPETITION CAR INSTRUCTION MANUAL INTRODUCTION Rising to the challenge of improving upon their racewinning Serpent 70, the engineers at Serpent once again came up with a formidable challenger,

More information

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING.

PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. INSTRUCTION MANUAL PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS NEEDED You will need to buy a few items

More information

PRO THE ULTIMATE RACING MACHINE

PRO THE ULTIMATE RACING MACHINE PRO1 2004 THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2004 PRO1 race car. All this data is based on what our factory engineers and drivers

More information

PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK

PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK PARTS CATALOG FOR MTA-4 MONSTER TRUCK No.6218-F 1/8 4WD NITRO MONSTER TRUCK 1/8 4WD NITRO MONSTER TRUCK Features High power and reliable.21 size engine that has two different starting methods (pull start

More information

365L (2001) Page 1 of 36 54" Deck Assembly

365L (2001) Page 1 of 36 54 Deck Assembly 365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting

More information

Pan Car Setup and Troubleshooting

Pan Car Setup and Troubleshooting Pan Car Setup and Troubleshooting Problems can come up in the midst of competition. Either the car is not handling properly on the track or there are problems with equipment. Troubleshooting problems should

More information

En Instruction Manual De Bauanleitung. Fr Manuel de montage

En Instruction Manual De Bauanleitung. Fr Manuel de montage En Instruction Manual De Bauanleitung Fr Manuel de montage RTR Trophy Truggy Flux En De Fr Jp Vol.1 101875 Chassis Maintenance Chassis Wartung Entretien du châssis シャーシのメンテナンス 1 Gear Differential 101087

More information

INSTRUCTION MANUAL & REFERENCE GUIDE

INSTRUCTION MANUAL & REFERENCE GUIDE INSTRUCTION MANUAL & REFERENCE GUIDE Introduction Serpent likes to welcome you to the fascinating world of rc car racing. You are now part of the worldwide network of Serpent drivers, which gives you access

More information

TOWC Universal Drive Shaft Set...15,16 x2pcs. TOWC Engine Mount...98 x1pc. TOWC Dogbone (Rear)...19 x1pc

TOWC Universal Drive Shaft Set...15,16 x2pcs. TOWC Engine Mount...98 x1pc. TOWC Dogbone (Rear)...19 x1pc Replacement Parts Stock # Description Included DTXC5...5x0mm Bearing...x2pcs DTXC5...x6mm Bearing...x2pcs DTXC6...mm Bearing...x2pcs TOWC6032...Air Filter Set...02,03,0,05 xpc TOWC600...Rear Axle... xpc

More information

PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR

PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR PARTS CATALOG FOR SST STADIUM TRUCK RTR CAR No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK NITRO POWERED STADIUM TRUCK No.6714-F 1/10 4WD NITRO POWERED STADIUM TRUCK Features: 100% Factory assembled 2-Channel

More information

RTR KITS - REQUIRED FOR OPERATION

RTR KITS - REQUIRED FOR OPERATION Strong Front and Rear chassis braces. Tuned Polished Dual Chamber racing pipe. Unique adjustable chassis width of 310mm or 330mm. High performance.26 engine with Shaft Start Motor handle. Full race Offset

More information

... REQUIRED READING...

... REQUIRED READING... REQUIRED READING.........UNDERSTAND THIS MANUAL! Thank You and Congratulations on purchasing the OUTLAW! Within this kit you will find a race winning car with over 21 years worth of CUSTOM WORKS design

More information

E-Revo (Model ) Parts List

E-Revo (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. E-Revo (Model 56036-4) Parts List Bearings & Bushings 4609 Ball bearings (5x10x4mm)

More information

1:8 SCALE GAS POWERED OFF-ROAD BUGGY

1:8 SCALE GAS POWERED OFF-ROAD BUGGY Instruction RTR Manual 1:8 SCALE GAS POWERED OFF-ROAD BUGGY PLEASE READ INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING THIS MODEL. KEEP THIS MANUAL FOR PARTS NUMBERS WHEN ORDERING. REQUIRED FOR OPERATION THINGS

More information

INSTRUCTION MANUAL SUPPLEMENTARY SHEET

INSTRUCTION MANUAL SUPPLEMENTARY SHEET INSTRUCTION MANUAL SUPPLEMENTARY SHEET The T3R Raycer is based on the hugely-successful, race-winning T3 and as such the majority of spare parts and option parts are fully compatible between the two cars.

More information

PRO1 2001, THE ULTIMATE RACING MACHINE

PRO1 2001, THE ULTIMATE RACING MACHINE PRO1 2001, THE ULTIMATE RACING MACHINE Dear Customer Enclosed you will find several data sheets and illustrations for the 2001 PRO1 race car. All this data is based on what our factory engineers and drivers

More information

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print.

PARTSBOOK. This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. 2 PARTSBOOK This part of the manual contains part numbers and illustrations based on the latest information available at the time of print. Hall Manufacturing, Inc. reserves the right to make changes at

More information

OWNER'S MANUAL 2000 & ROAR National Champion

OWNER'S MANUAL 2000 & ROAR National Champion 2000 & 2001 ROAR National Champion OWNER'S MANUAL Carefully read through all instructions to familiarize yourself with the parts, construction techniques, and tuning tips outlined in this manual. Being

More information

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS

RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS RJS2020 SPORT 3.2 1/10 PAN CAR KIT LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 SPORT 3.2 KIT. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED VIEW

More information

- 3 -

- 3 - - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 - - 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 - - 22 - 1/8th Scale Electric 4WD GT Car MGT7 ECO Parts List E2103 FRONT

More information

Bigfoot (Model ) Parts List

Bigfoot (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Bigfoot (Model 36084-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

Assembly Manual. 1/10th Formula 1 Car

Assembly Manual. 1/10th Formula 1 Car Assembly Manual 1/10th Formula 1 Car Center Pivot Bag 1 3374 - Center Pivot Socket 40194 - Hard Anodized Alum Pivot ball 3254-2-56 *Note - Sometimes it is helpful to slightly over-tighten the top clamp

More information

29066 29156 29153 29154 29003 29157 29003 29157 29153 29153 29157 29155 29153 29066 29157 29003 29157 29066 29003 29158 29153 Oil No. 5000 29154 29003 29003 29157 29153 29046 29153 29157 29153 29157 29046

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Stampede (Model 36054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

ROLL CENTER You can adjust the front and rear roll centers of the XB8 by changing the mounting locations of various components.

ROLL CENTER You can adjust the front and rear roll centers of the XB8 by changing the mounting locations of various components. Your XRAY XB8 luxury nitro buggy is a top competition, precision racing machine that features multiple adjustments that allow you to set up for any track condition. The XB8 includes innovative set-up features

More information

Slayer Pro 4X4 (Model ) Parts List

Slayer Pro 4X4 (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Slayer Pro 4X4 (Model 59076-3) Parts List Air Filters 5262 Air filter and pre-filter

More information

Stampede (Model ) Parts List

Stampede (Model ) Parts List Stampede (Model 36054-1) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

HANDLEBAR AND CONSOLE ASSEMBLY

HANDLEBAR AND CONSOLE ASSEMBLY Section 6 Parts List HANDLEBAR AND CONSOLE ASSEMBLY 4 33 47 4 49 7 3 78 4 97 46 44 37 38 37 48 39 35 36 34 7 3 4 5 45 4 3 4 0 33 9 96 80 6 300 84 9 5 30 4 9 30 4 3 43 97 0 43 3 68 9 9 Models 753B, F753B

More information

MR-4BCS Parts List (Updated 9/15/03)

MR-4BCS Parts List (Updated 9/15/03) 4WD Offroad Kits MRBC-1S MR-4BCS Competition 4wd Buggy Kit $ 499.95 Chassis Parts ZS-001B Front Bumper 1 $ 3.75 ZS-002GB Graphite Main Chassis 1 $ 39.00 ZS-003UDS Upper Deck 1 $ 10.75 ZS-118 Battery Plate

More information

Introduction. Contents

Introduction. Contents Instruction Manual Introduction Congratulations on your newly acquired Serpent 70. You have chosen the highest quality, ultimate-performance 00mm racecar that is easy to use, assemble, and set up. As part

More information

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS

RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS RJS2021 LTO SPORT OVAL RACER LESS ELECTRICS THANKS FOR BUYING THE RJ SPEED 1/10 LTO SPORT KIT FOR OVAL RACING. THE ASSEMBLY WILL NOT BE DIFFICULT IF YOU READ THE TEXT, LOOK AT THE PICTURES, AND THE EXPLODED

More information

Revo with TRX 2.5R Parts List

Revo with TRX 2.5R Parts List Revo with TRX 2.5R Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Air Filters 5264 Air

More information

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List

E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List E-Revo: TQi 2.4GHz Radio (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars.

More information

E-Revo (Model 5603) Parts List

E-Revo (Model 5603) Parts List E-Revo (Model 5603) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Prices are shown in US Dollars. Bearings & Bushings

More information

1/8 Scale Gas Powered Off-Road Buggy

1/8 Scale Gas Powered Off-Road Buggy 1/8 Scale Gas Powered Off-oad Buggy The body shown is slightly different in the U.S. kits PUE COMPETITION... INSTUCTION MANUAL OFNA acing 22692 Granite Way, Ste. B Laguna Hills, Ca. 92653 (949) 586-2910

More information

for the B3 Sport kit #9013

for the B3 Sport kit #9013 All kit versions include: 2.40:1 transmission for effortless power handling. Molded composite chassis for better rigidity and Lexan B3 racing body. Quadra-symmetric suspension for greater stability and

More information

X 3mm Flat Head Screw. Adjustment Hole x15x4mm Ball bearing. M2x10mm Hex Screw. Spring. Clutch Shoe. Ball.

X 3mm Flat Head Screw. Adjustment Hole x15x4mm Ball bearing. M2x10mm Hex Screw. Spring. Clutch Shoe. Ball. INSTRUCTIONS #35017 NITRO OB-4 1/10 SCALE 2-SPEED TRANSMISSION SET (Shoe Type) * This professional two speed transmission is only for Nitro OB-4 1/10 Scale OB4 Gas Car Kits. Nitro Ob4 ASSEMBLY OF THE TWO

More information

REQUIRED READING SUGGESTED TOOLS

REQUIRED READING SUGGESTED TOOLS REQUIRED READING Thank You and Congratulations on purchasing this ENFORCER GSX! Within this kit you will find a race winning car with over 17 years worth of CUSTOM WORKS design and quality. In order for

More information

T-Maxx (Model ) Parts List

T-Maxx (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. T-Maxx (Model 49077-3) Parts List Air Filters 5262 Air filter and pre-filter inserts,

More information

Item Number Item Name MSRP MAP

Item Number Item Name MSRP MAP Kits and RTRs 4021 RC12R6-FT KIT $439.99 $285.99 7063 ProSC 4x4 RTR $529.99 $334.99 7063C ProSC 4X4 RTR LiPo Combo $599.99 $379.99 8023 RC10F6 Factory Team Kit $499.99 $339.99 20150 SC28 RTR LUCAS OIL

More information

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1

ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B Associated Electrics, Inc. RS-1 ASSOCIATED 1:10 SCALE ELECTRIC BUGGY INSTRUCTION MANUAL FOR THE TEAM ASSOCIATED RC10B4 TT RS-1 2003-2006 Associated Electrics, Inc. FINAL ADJUSTMENTS RADIO ADJUSTMENTS Use the following

More information

Rustler (Model ) Parts List

Rustler (Model ) Parts List Parts shown in bold are optional accessories. Part categories and individual part listings are arranged alphabetically. Rustler (Model 37054-1) Parts List Bearings & Bushings 4607 Ball bearings (5x11x4mm)

More information

3.0 Tuning Tips. To Shut Off the Engine: Use the included pipe plug or simply bump the flywheel with a wrench or plastic handled tool.

3.0 Tuning Tips. To Shut Off the Engine: Use the included pipe plug or simply bump the flywheel with a wrench or plastic handled tool. TM 8IGHT 3.0 Tuning Tips Before you start making changes on your 8IGHT 3.0 Off-Road Racing buggy, you need to make a few decisions. First of all, tires, and how they are setup, have a tremendous impact

More information

Bag 1. Bag 1. Center Pivot. Center Pivot

Bag 1. Bag 1. Center Pivot. Center Pivot 8 00734 01901 5 Center Pivot Bag 1 3374 - Center Pivot Socket 4019 - Alum Pivot ball 3254-2-56 Button Head *Note - Sometimes it is helpful to slightly over-tighten the top clamp screws, then work the ball

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated

More information

1:8 SCALE NITRO POWERED TOURING CAR

1:8 SCALE NITRO POWERED TOURING CAR 1:8 SCALE NITRO POWERED TOURING CAR RTR INSTRUCTION MANUAL *SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. SAFETY PRECAUTIONS! This radio control models is not a toy! - First time builders should

More information

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube

Caution. Electronic Speed Controller Instructions. Needle Nose Pliers Awl RCE3003 HD Grease. Fusion Tire Glue. RCE3004 Super Diff Lube Caution Please read the following manual closely and familiarize yourself with its contents before operating the model. Keep the manual in a safe place for future reference for repairs, part numbers and

More information

Hydrostatic Zero-Turn Commercial Riding Mower

Hydrostatic Zero-Turn Commercial Riding Mower Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter

More information

BIND ST-TRIM TH-TRIM ST-D/R

BIND ST-TRIM TH-TRIM ST-D/R 4 4 4 4 BIND ST-TRIM TH-TRIM ST-D/R 1. Put the battery in the car. 2. Install the battery. 3. Turn on the transmitter. Connect firmly. 4. Turn on the electronic speed controller. ON OFF AX80084 UV Joint

More information

INTRODUCTION. S35-T Kit Features :

INTRODUCTION. S35-T Kit Features : INTRODUCTION The S35-T is a brand new SWORKz 1/8 nitro Truggy based on the SWORKz S35-3 nitro Buggy. The Evolution of the S35-T project is the result of SWORKz passion for racing and race development.

More information

Assembly Diagram-1 for (C) 1/10th scale monster truck Shock Absorber Assembly(monster truck)

Assembly Diagram-1 for (C) 1/10th scale monster truck Shock Absorber Assembly(monster truck) Assembly Diagram-1 for (C) 1/10th scale monster truck Shock Absorber Assembly(monster truck) Assembly Diagram-2 for (C) 1/10th scale monster truck Steering Set Assembly(monster truck) 1-BT3*14 BH screw

More information