Filtration Units & Elements Strainers Indicators:

Transcription

1 Filtration Units & Elements Strainers Indicators: Suction, Vacuum, Pressure & Return Line You can change our elements... but you can t replace our products. clean hydraulic system is a must for efficient and cost effective fluid power. t Marion, we present a full line of reliable products, field proven over three decades of use. MRDYNE ORPORTION sales@maradyne.com MRDYNE ORPORTION

2 TLE OF ONTENTS FILTERS Page Single Element Sump Filters... Series SUS & SRS...3 Dual Element Sump Filters...Series SU & SR Thru-Wall Sump Strainer...6 Mini Sump Filters top Mini Line Filters bottom Multi-Port Dual Element Filters... Series MS Low Pressure T-Line Filters...Series T & TF High Pressure Filters... Series HP High Pressure Filters... Series Spin On Single Filters... Series SF Spin On Single Filters... Series SF Spin On Twin Filters... Series TF Spin On Micro Glass Elements... Series S-20-MG...19 Spin On Micro Glass Elements... Series S-50-MG...20 INDITORS Return Line Indicators... Series LP... 2 (elow) Suction Line Indicators... Series MF-360 & ML Differential Pressure Indicators... Series D MRDYNE ORPORTION RETURN LINE INDITOR Series LP Model LP Low Pressure Indicator FETURES Provides visual warning signal indicating: contaminated filter element low fluid temperature high fluid viscosity impending opening of filter bypass valve 2.31" (59mm) 1.50" (38mm) DESRIPTION The LP indicator red alert sleeve has a full 360 visibility. Mounted upstream of filter or directly on filter inlet side, the model LP requires no maintenance or calibraiton, and resists vibrations and shocks. SPEIFITIONS 1/4" NPT 1.94" (49mm) Standard Settings: LP - 20 LP PSID (.7 R) Type Pressure Setting (PSID) LP PSID (1.4 R) LP PSID (1.7 R) Operating Temperature: -40 F (-40 ) to 200 F (93 ) continuous Housing: Nickel plated cold rolled steel Sight Dome: Transparent, high impact polycarbonate

3 MRDYNE ORPORTION SINGLE ELEMENT SUMP FILTERS Series SUS & SRS Specifications GPM L/min Port Size (NPTF) 1" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 3" Specifications subject to change without notice. FETURES 1" through 3" NPTF port sizes 5 GPM (19 L/min.) through 150 GPM (568 L/min.) flow ratings 60 mesh (262 micron) retention or 100 mesh (150 micron) retention or optional 200 mesh (74 micron) Extra large filtering area With or without integral bypass valve With or without magnet leanable OPERTION Pump draws fluid through filtering medium and contaminants are trapped upon the outer surface. Protection against pump cavitation is given by the SRS filter with built in bypass valve. Three factory-set pressure settings are available for your bypass requirements. PPLITIONS SUS/SRS bonded sump filters for use with hydraulic oils, coolants, lubricants and fire resistant fluids. wide range of equipment applications include agricultural, construction, industrial, material handling, chemical, petroleum, machine tool, processing and automated machinery. 4.06" (103mm) 5.06" (128mm) 6.06" (154mm) 6.06" (154mm) 7.06" (179mm) 7.06" (179mm) 8.31" (211mm) 10.31" (262mm) Dimensions 3.12" ( 79mm) 4.12" (105mm) 5.12" (130mm) 5.12" (130mm) 6.12" (156mm) 6.25" (159mm) 7.25" (184mm) 9.25" (235mm) 3.19" ( 81mm) 3.19" ( 81mm) 3.19" ( 81mm) 4.31" (110mm) 4.31" (110mm) 5.00" (127mm) 5.00" (127mm) 5.00" (127mm) Model SUS Filter Model SRS Filter with ypass Valve Type SUS Without bypass SRS With bypass Rate 05 5 GPM GPM GPM GPM GPM GPM GPM GPM SRS SF 48 Filtration 3 74 micron, 200 mesh micron, 100 mesh micron, 60 mesh ypass Setting (SRS Only) 1-1/2 PSI 3 PSI (standard) 5 PSI Port Size 16 1" /4" /2" 32 2" /2" 48 3" ypass Valve Setting (SR Only) (Std.) PSID R

4 MRDYNE ORPORTION DUL ELEMENT SUMP FILTERS Series SU & SR FETURES twin-life dual element filter 1" through 3" NPTF port sizes 10 GPM (38 L/min.) through 150 GPM (568 L/min.) flow ratings 60 mesh (262 micron) retention or 100 mesh (150 micron) retention or optional 200 mesh (74 micron) Extra large filtering area With or without integral bypass valve With or without magnet leanable PPLITIONS SU/SR bonded sump filters for use with hydraulic oils, coolants, lubricants and fire resistant fluids. wide range of equipment applications include agricultural, construction, industrial, material handling, chemical, petroleum, machine tool, processing and automated machinery. Model SU Filter with One-Piece Element Specifications GPM L/min Element rea In. 2 m Port Size (NPTF) 1" /2 1" /2 1-1/4" /2 1-1/2" /2 2" /2 2-1/2" - 8 3" - 8 3" " (103mm) 5.06" (128mm) 6.06" (154mm) 6.06" (154mm) 7.06" (179mm) 7.06" (179mm) 8.30" (211mm) 10.30" (262mm) Dimensions 3.16" ( 80mm) 3.16" ( 80mm) 3.16" ( 80mm) 4.30" (109mm) 4.30" (109mm) 5.00" (127mm) 5.00" (127mm) 5.00" (127mm) 3.12" ( 79mm) 4.12" (105mm) 5.12" (130mm) 5.15" (131mm) 6.15" (156mm) 6.20" (157mm) 7.20" (183mm) 9.20" (234mm) Specifications subject to change without notice. SR 95 SF 48 Model SR ypass Filter with One-Piece Element Type SU Without bypass SR With bypass Element rea In In In In In In In In. 2 ypass Setting (SR Only) 1-1/2 PSI 3 PSI 5 PSI Port Size 16 1" /4" /2" 32 2" /2" 48 3" ypass Valve Setting (SR Only) Filtration 3 74 micron, 200 mesh micron, 100 mesh micron, 60 mesh Magnet Option SF Without magnet PF With magnet PSID 1-1/2 3 5 R

5 DUL ELEMENT SUMP FILTERS (continued) Pressure Differential/ haracteristics data shown below was taken from laboratory tests using petroleum-base hydraulic oil. Pressure differentials were measured at the filter outlet fitting. 150 MIRON FILTRTION (100 MESH) WITH 225 SSU OIL 262 MIRON FILTRTION (60 MESH) WITH 225 SSU OIL P R , 30 & 40 SERIES P R 20, 30 & 40 SERIES GPM L/min GPM L/min P R & 60 SERIES GPM L/min P R & 60 SERIES GPM L/min P R , 80 & 90 SERIES GPM L/min P R , 80 & 90 SERIES GPM L/min P is the pressure differential measured in inches of mercury (2" Hg = 1 PSI), 1" Hg =.034 R 5

6 MRDYNE ORPORTION THRU-WLL SUMP STRINERS FETURES Low cost yet highly efficient leanable wire cloth 5 GPM (19 L/min.) to 100 GPM (379 L/min.) flows available Optional 3 PSI bypass 200 mesh (74 micron) available option PPLITIONS Through the wall mini sump filters for fluid power, lubrication, fuel and related systems. ENGINEERING DT Nominal Rating: 150 micron or 262 micron Wire loth: Stainless Steel, 100 mesh or 60 mesh Fittings: ast Iron ushings onstruction: Epoxy ond Specifications F ol w NPT S zi es -- ni.(m m ) E el m entre a Sq. ni. D mi ens oi ns -- ni.(m m ) G PM L M/ ni. M a el Threa d O utel tport (Sq.m m ) (25 4. ) 1 2/ (12 7. ) 36 (232 ) (120 ) (25 4. ) / ( ) 3 4/ ( ) 70 (452 ) (173 ) (33 3. ) / (38 0. ) 1 (25 4. ) 90 (581 ) (201 ) (39 6. ) (50 8. ) 1-1 4/ ( ) 125 (819 ) (229 ) (50 8. ) (76 2. ) 2 (50 8. ) 285 (1839 ) (236 ) (76 2. ) ( ) 3 (76 2. ) 363 (2342 ) (264 ) ( ) Specifications subject to change without notice. Model SWM X Rate GPM GPM GPM GPM GPM GPM ypass Setting X No ypass 3 PSI Filtration 5 150µ (100 mesh) 7 262µ ( 60 mesh) Optional: 3 74µ (200 mesh) 6

7 MRDYNE ORPORTION MINI SUMP FILTERS FETURES Low cost and compact leanable wire cloth media. rating to 10 GPM (38 L/min.) for all models except , which is rated to 4 GPM (15 L/min.). Models Other Than PPLITIONS Mini sump filters are designed for suction line filtration in fluid power, lubrication, fuel and related systems. Lengths and port sizes differ depending on dirt holding capacity and flow requirements. ENGINEERING DT Nominal Rating: 150 micron Wire loth: Stainless Steel Fitting and ap: luminum onstruction: Epoxy ond Operating Temperature: 275 F (135 ) maximum Service: Most hydraulic fluids Model Specifications Model Port Size 3 /8" NPT 1 /2" NPT 3 /4" NPT 3 /4" NPT 1" NPT 1 /4" NPTF 1 /2" NPT Element rea In m /8" (48mm) 1 7 /8" (48mm) 1 7 /8" (48mm) 1 7 /8" (48mm) 1 7 /8" (48mm) 1.83" (46mm) 1.62" (48mm) Dimensions 1 1 /2" (38mm) 1 1 /2" (38mm) 1 1 /2" (38mm) 1 1 /2" (38mm) 1 1 /2" (38mm) 1.42" (36mm) 1-1/2" (38mm) 3 3 /32" (48mm) 3 3 /32" (48mm) 3 3 /32" (48mm) 5 5 /8" (143mm) 6" (152mm) 2.00" (51mm) 5.59" Specifications subject to change without notice. MINI LINE FILTERS Specifications Elementrea: M-12-P 12 in. (77 cm ) Filtration: 150 micron Maximum Pressure: 50 PSI (3.35 ar) Fittings: 1/4" NPTF PRESSURE DROP WITH 225 SSU 85 F (32 ) PSID R M-12-P MODEL M-12-P GPM 2 4 L/min

8 MRDYNE ORPORTION MULTI-PORT DUL ELEMENT FILTERS Series MS STNDRD FETURES hoice of 3 outlet ports on 3 models simplifies difficult installation problems. Lightweight, rugged cast aluminum construction. Eight basic models covering a range from 10 GPM (38 L/min.) through 150 GPM (569 L/min.). Re-usable, cleanable twin-life dual element with up to 4 times more filtering area ypass valve isolated in the filter head. Vacuum indicator alerts you to filter condition and impending bypass. OPTIONL FETURES Viton O rings for special applications. ny combination of NPTF or SE flange for outlet ports, and D. OPERTION Hydraulic fluid flows from the reservoir into the inlet port, continues through the low delta P element and through the outlet port. When the element becomes contaminated, your system is protected against possible wash-off of collected contaminant. Unlike other systems where the bypass flow is forced over the dirt-clogged element, the multi-port filter features a unique bypass valve which is self-contained and isolated in the filter head, and does not depend on the mechanical movement of the sludge covered element. ypassing fluid flows from the inlet port directly to the outlet port, completely ignoring the dirty element and eliminating the possibility of dumping dirt downstream. Type MS 50 F 5 32 V Rate GPM GPM GPM GPM GPM GPM GPM GPM Port Type F NPTF G Flange, machining only Filtration 2 40 micron (special order) 3 74 micron micron micron (special order) Options M Lock-type indicator (ML360) V Viton seals Port Size 16 1" /4" /2" 32 2" /2" 48 3" /2" Outlet Port Location Port (standard) Port (optional) Port D (optional) ypass Setting 3 PSI 5 PSI 8

9 " Hg R Specifications Model Series MS 10 MS 20 MS 30 MS 50 MS 60 MS 75 MS 100 MS 150 Rated GPM (L/min.) 5-10 (19-38) (38-76) (76-114) ( ) ( ) ( ) ( ) ( ) Model MS 10 Model MS 20 & MS GPM L/min OPT. PORT D Pipe Velocity Ft./sec. M/sec ( ) ( ) ( ) ( ) ( ) ( ) ( ) ( ) Port 1-1/2" 1-1/2" 1-1/2" 2" 2-1/2" 2-1/2" 3" 3-1/2" NPTF Port 1" OPT. PORT " Hg R Model MS Model MS 60 & MS GPM L/min /2" 1-1/2" 2" 2-1/2" 2-1/2" 3" 3-1/2" SE Flange Size 1 " 1-1/2" 1-1/2" 2-1/2" 2-1/2" 2-1/2" 3-1/2" 3-1/2" Element rea In. 2 (m 2 ) 130 (839) 230 (1484) 260 (1677) 370 (2387) 450 (2903) 540 (3484) 720 (4645) 1000 (6452) Unit Wt. Lbs. (Kgs.) 10-1/4 (4.65) 10-1/2 (4.76) 10-3/4 (4.87) 15-1/2 (6.91) 15-1/2 (7.03) 15-3/4 (7.14) 30 (13.61) 30-1/4 (13.72) (279) (279) (279) (319) (319) (319) (386) (386) " Hg R Model MS Model MS GPM L/min VERGE PRESSURE DROP WITH 225 SSU 70 F (21.0 ) Sp. Gr = 40 micron, b = 74 micron, c = 150 micron, d = 262 micron 4.29 (125) 4.29 (125) 4.29 (125) 5.86 (149) 5.86 (149) 5.86 (149) 8.56 (217) 8.56 (217) Dimensions In. (mm) 5.65 (144) 5.65 (144) 5.65 (144) 7.15 (182) 7.15 (182) 7.15 (182) 9.95 (253) 9.95 (253) DD 6.50 (165) 6.50 (165) 6.50 (165) 8.00 (203) 8.00 (203) 8.00 (203) (273) (273) EE 3.34 (85) 3.34 (85) 3.34 (85) 4.30 (109) 4.30 (109) 4.30 (109) 5.75 (146) 5.75 (146) FF 2.46 (62) 2.46 (62) 2.46 (62) 2.93 (74) 2.93 (74) 2.93 (74) 4.28 (109) 4.28 (109) GG 2.18 (55) 2.18 (55) 2.18 (55) 2.56 (65) 2.56 (65) 2.56 (65) 3.40 (86) 3.40 (86) Specifications subject to change without notice. - D-D MX. E-E ypass Valve Setting PSID 3 5 R F-F - OUTLET PORT G-G INLET PORT - 9

10 MRDYNE ORPORTION LOW PRESSURE T-LINE FILTERS Series T & TF STNDRD FETURES Up to 300 PSI (20.69 ar) operating pressure. hoice of precision throw-away paper element or wire cloth dual element. Wide choice of micron retention ratings to meet demanding filtration needs. hoice of port sizes and mounting holes for ease of installation. Rated at up to 30 GPM (114 L/min.) flow, depending on allowable pressure drop ompact less than 1" (25.4 mm) disassembly clearance required to replace or clean dirty element. Precision, die-cast housing and advanced design assure economy and convenience. Protective magnet. OPTIONL FETURES Isolated bypass valve to guard your system components against washing of collected contaminants downstream, self-contained in the filter head, available in a range of standard settings from 3 PSID (.21 ar) to 25 PSID (1.72 ar). Vacuum and return line indicators. Top mounting holes. Viton seals. Pressure and vacuum taps. 4.22" (107mm) 1.28" (32.5mm) 2.6" (66.04mm) Inlet Outlet.75" (19.05mm) PPLITIONS T-Line filters are specified to protect automotive, agricultural, construction, industrial, material handling, chemical, petroleum, machine tool, processing, and automation equipment fluid systems. 4.22" (107mm) Outlet Inlet 3/8" 16 mounting holes 1.5" (38.1 mm).62" (15.8mm) ref. : 130 in. 2 ( 839 cm 2 ) element 8.13" (206mm) 230 in. 2 (1484 cm 2 ) element 10.13" (257mm) 450 in. 2 (2903 cm 2 ) element 10.13" (257mm) Optional 1/4" 8 taps (2): for pressure indicator for vacuum indicator T 68 G 20 GV Type Filtration Wire cloth w/130 in. 2 element: F22 40 micron F23 74 micron F micron F micron Wire cloth w/230 in. 2 element: F42 40 micron F43 74 micron F micron F micron Paper w/450 in. 2 element: micron micron Optional ypass Valve J No valve 3 PSI 5 PSI E 10 PSI F 15 PSI G 25 PSI Optional Features F MF Series vacuum indicator G LP return line indicator M Locker vacuum indicator V Viton seals Port Size (N.P.T.F.) 12 3/4" " /4" 11 Optional Taps K No taps Pressure taps (2) Vacuum taps (2) ypass Valve Setting E F G PSID R

11 T Series Designed for use with petroleum and most water-base fluids, T Series filters have a high-grade pleated paper element with corrosion-resistant metal end-caps, protective exterior perforated metal support, and integral gasket for leak-proof sealing. Replacement elements are easily installed for low-cost maintenance. VERGE PRESSURE DROP 140 MIRON ELEMENT F (29.4 ) MESURED ROSS 1" (25.4MM) FILTER INLET & OUTLET PORTS PSI R Nominal Size Particle Retention Rating 10 micron 25 micron Element rea 450 in. 2 (2903 cm 2 ) T68 T69 Replacement Paper Element Only 10 micron 25 micron 16.1 grams 23.8 grams 68, 10 = , 25 = 2.1 Dirt Holding apacity GPM L/min Nominal Size Particle Retention Rating 40 micron 74 micron 150 micron 262 micron 130 in. 2 (839 cm 2 ) TF22 TF23 TF25 TF27 Element rea 230 in. 2 (1484 cm 2 ) TF42 TF43 TF45 TF47 TF Series TF Series filters feature a patented wire cloth dual-element actually two elements mounted coaxially in a single assembly. This unique dual element provides 50% longer life between cleanings, because element area is 50% larger than comparable single-edge elements. Take-apart construction allows easy maintenance cleaning with less downtime. PSI R VERGE PRESSURE DROP F (29.4 ) MESURED ROSS 1" (25.4MM) FILTER INLET & OUTLET PORTS GPM L/min

12 MRDYNE ORPORTION HIGH PRESSURE FILTERS Series HP STNDRD FETURES ypass valve to protect filter element, standard setting is 25 PSID (1.72 ar). Other settings are available. 360 mechanical differential indicator provides gradual warning of dirty element before bypass valve opens. Standard setting is 20 PSID (1.38 ar) for full red indication. Other settings are available. Mounting holes for convenient installation. Drain plug. Self-aligning element for easy replacement. T-type construction for more efficient contaminant removal. ycle tested at 3900 PSI (269 ar) for 1,000,000 cycles. Filter retention: 5 micron nominal, 5 = micron nominal, 10 = micron absolute, 3 = micron absolute, 12 = 200 OPTIONL FETURES 360 electro-mechanical differential indicator. Provides gradual warning and electrical signal before bypass opens. Differential taps for remote indicator location. PPLITIONS The HP series is designed for high pressure hydraulic systems that require fine filtration. These filters come in three standard sizes with continuous working pressure of 3000 PSI (207 ar) and flows to 60 GPM (227.1 L/min.). NPFT port Standard (SE w/mounting shown) ypass Valve Setting F G (Std.) H PSID R Type Model 1 16 GPM 2 45 GPM 5 60 GPM HP 28 G 17 M Filtration 1 5 micron 8 10 micron * 0 3 micron glass * 2 12 micron glass *vailable only in series. Options V Viton seals L Electric differential pressure indicator M Magnet (HP2 & HP5 Only) T Differential pressure taps (2) Port Size HP-1: 12 3/4" NPTF /16" - 12 (SE 12) HP-2 & HP-5: /4" NPTF /8" - 12 (SE 20) ypass Valve Setting F 15 PSI G 25 PSI (standard, factory set) H 35 PSI X No bypass valve 12

13 F K Specifications Model Weight: Dim.: D E F G H J X Z HP1 13 lbs. (5.8 kg) 4.50" (114mm) 3.30" ( 84mm) 4.62" (117mm) 3.14" ( 80mm) 8.16" (207mm) 3.00" ( 76mm) 2.50" ( 64mm) 1.62" ( 41mm) 3.00" ( 76mm) 3 /8" 16.75" ( 19mm) 1.50" ( 38mm).87" ( 22mm) Specifications subject to change without notice. HP2 30 lbs. (13.6 kg) 6.54" (166mm) 4.86" (123mm) 6.62" (168mm) 3.05" ( 78mm) 10.03" (255mm) 3.60" ( 91mm) 3.44" ( 87mm) 1.94" ( 49mm) 4.00" (102mm) 1 /2" 13.88" ( 27mm) 1.50" ( 38mm).87" ( 22mm) HP5 49 lbs. (22.2 kg) 6.54" (166mm) 5.00" (127mm) 6.62" (168mm) 3.05" ( 78mm) 16.91" (430mm) 3.60" ( 91mm) 3.44" ( 87mm) 1.94" ( 49mm) 4.00" (102mm) 1 /2" 13.88" ( 27mm) 1.87" ( 48mm) 1.25" ( 32mm) G X THRED Z DEEP (8 PLES) J Diameter D dd 1" (25.4mm) for Electric Indicator H learance llowance for Element Removal K.12" (3mm) Shorter for Flange Mounting Hex D PORTS E H PSI R F (39 ) MODEL HP GPM L/min VERGE PRESSURE DROP PSI R F (29.4 ) MODEL HP GPM L/min PSI R MODEL HP2 GPM L/min PSI R MODEL HP2 GPM L/min PSI R MODEL HP5 PSI R MODEL HP GPM L/min GPM L/min

14 MRDYNE ORPORTION FETURES uilt-in bypass valve. In-line type designed for 3000 PSI (207 R) operating pressure. Inexpensive. Low cost replacement parts. 40 nominal micron retention. 3 & 12 micron absolute. PPLITIONS Designed to meet today s requirements for good protection of hydraulic components on machine tools, industrial equipment, construction machinery, farm equipment, or wherever close tolerance parts would be damaged by contaminated oil. OPERTION large flow-area bypass valve, built into the head of the filter, cracks at 35 PSI (2.45 R), preventing damage to element if flow is restricted due to contamination. Mounting filter at pump discharge port protects all valves, cylinders, motors and rotary actuators. HIGH PRESSURE FILTERS Series SPEIFITIONS Model 14-2: apacity: 20 GPM (75.7 L/min.) Filtration: 40 micron nominal 75 micron absolute 40 = 96 Element rea: 26 in. 2 (167.7 cm 2 ) Element Type: Ribbon lamination Model 14-2: apacity: 20 GPM (75.7 L/min.) Filtration: 12 micron absolute 5 gram holding capacity 12 = 200 Element rea: 94 in. 2 (606.5 cm 2 ) Element Type: Micro Glass Model 14-2: apacity: 15 GPM (56.8 L/min.) Filtration: 3 micron absoluute 4.8 gram holding capacity 3 = 200 Element rea: 94 in. 2 (606.5 cm 2 ) Element Type: Micro Glass 200 PSID ollapse 3000 PSID ollapse vailable Options Taps for Differential Pressure Indicator E.P.R. and Viton available Optional porting available 40 MIRON VERGEPRESSURE DROP F (54 ) PSID R Type E Rate 2 40 micron 2 12 micron 2 3 micron Options E Pressure (gauge) taps Port Size 6 3/4" NPT 12T 3/4" SE Optional porting is available GPM L/min

15 3.75" (95mm) 2.5" (65mm) 1.5" (38mm).4" (10mm) 2.125" (54mm) 1.125" (29mm) 9.625" (244mm) 7.875" (200mm) 3.25" (83mm) PSID R MIRON VERGEPRESSURE DROP F (39 ) GPM L/min PSID R MIRON VERGEPRESSURE DROP F (39 ) GPM L/min

16 MRDYNE ORPORTION SPIN ON SINGLE FILTERS Series SF20 FETURES Inexpensive. Easy maintenance. Only 3/4" removal clearance needed for replacing cartridge. ypass valve with wide choice of settings. Rugged die cast aluminum head. Optional 1/4" NPTF gauge ports. OPTIONL 1/4-18 NPTF GUGE PORTS EITHER SIDE.87" (22mm) PPLITIONS Designed for most return line applications up to 20 GPM (76 L/min.). lso can be used for lower flow suction line applications. ompatible with petroleumbased oil in mobile and industrial equipment. OPERTION Dirty fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. lean fluid is then directed through the outlet port. n optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination. S-28 S-29 S-28 MG 7.50" (191mm) SPEIFITIONS Operating Pressure: 200 PSI (13.8 ar) maximum Operating Temperature: 250 F (121 ) maximum Standard Seals: una-n Element rea: 450 in. 2 (2903 cm 2 ) eta Rating 10 micron element 10 = = Greater than100 eta Rating 25 micron element 30 = 4 eta Rating 10 micron glass 12 = 100 PSI R VERGE PRESSURE DROP F (39 ) 0.00 GPM L/min " (19mm) P 1 P 2 dd 3/4" (19mm) to outside dimension for element removal. 1/4-20 UN 2 x.50" DEEP MOUNTING HOLES S " (97mm) S " (38mm) Type Filtration 8 10 micron 9 25 micron 8MG 10 absolute SF28 G 12 SV ypass Valve Setting 3 PSI 5 PSI F 15 PSI G 25 PSI (standard, factory set) X No bypass valve Options P Pressure taps (order P 1 and/or P 2) S Vacuum taps (order S 1 and/or S 2) G LPXX pressure indicator F Floating vacuum indicator M Locking vacuum indicator (indicators not installed) V Viton seals Port Size (NPTF) 12 3 /4" 16 1" SE straight threads optional /16-12 (SE #12) optional ypass Valve Setting F G (Std.) PSID R

17 OPERTION Dirty fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. lean fluid is then directed through the outlet port. n optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination. SPEIFITIONS Operating Pressure: 200 PSI (13.8 ar) maximum Operating Temperature: 250 F (121 ) maximum Standard Seals: una-n Element rea: 950 in. 2 (6129 cm 2 ) Filter Retention: 10 micron nominal 33 micron absolute 10 = micron nominal 67 micron absolute 30 = 4 10 micron glass 12 = 100 MRDYNE ORPORTION FETURES Inexpensive and easy to maintain. Extended element available for higher flows at lower P. Only 3/4" removal clearance needed for replacing cartridge. ypass valve with wide choice of settings. Rugged die cast aluminum head. Optional 1/4" NPTF gauge ports. PPLITIONS Designed for most return line applications up to 50 GPM (189 L/min.). lso can be used for lower flow suction line applications. ompatible with petroleum-based oil in mobile and industrial equipment. PSI R VERGE PRESSURE DROP F (29 ) 0.00 GPM L/min SPIN ON SINGLE FILTERS Series SF50 1/4" NPTF INDITOR PORT OTH SIDES* 12.3" (312mm) 1.88" (48mm).94" (24mm) REPLELE SPIN-ON ELEMENTS (INLUDES SEL) S MIRON S MIRON S-58 MG S-58 E 10 MIRON S-59 E 25 MIRON S-58 MGE 1.12" (28mm) dd 1" (25mm) to outside dimension for element removal. 5.38" (137mm) 8.3" (211mm).62" (16mm) 5/16-18 UN 2 x.25" DEEP MOUNTING HOLES *OPTIONL 1.56" (40mm) Type Filtration 8 10 micron 9 25 micron 8MG 10 absolute SF58 G 20 SV ypass Valve Setting 3 PSI 5 PSI F 15 PSI G 25 PSI (standard, factory set) X No bypass valve Options P Pressure taps (2 ports, 1 plug provided) S Vacuum taps (2 ports, 1 plug provided) G LPXX pressure indicator F Floating vacuum indicator M Locking vacuum indicator (indicators not installed) V Viton seals Port Size /4" NPTF (standard) /8" SE (optional) ypass Valve Setting F G (Std.) PSID R

18 MRDYNE ORPORTION SPIN ON TWIN FILTERS Series TF50 FETURES Inexpensive and easy to maintain. Only 1" removal clearance needed for replacing cartridge. ypass valve with wide choice of settings. Rugged die cast aluminum head. Optional 1/4" NPTF gauge ports. Double dirt holding capacity. 1 NPTF OTH ENDS REPLELE SPIN-ON ELE- MENTS (INLUDES SEL) 1.4" (35mm) S-58 S-59 S-58 MG 5.62" (143mm) 5.50" (140mm) 3/8-16 UN 2 x.75" DEEP MOUNTING HOLES OPTIONL 1/4 NPTF 6.75" (171mm) INDITOR PORT OTH SIDES OPERTION Dirty fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. lean fluid is then directed through the outlet port. n optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination. Type Filtration 8 10 micron 9 25 micron 8MG 10 absolute TF58 G 24 SV ypass Valve Setting 3 PSI 5 PSI F 15 PSI G 25 PSI (standard, factory set) X No bypass valve PSI R " (30mm) 2.38" (60mm) VERGE PRESSURE DROP F (29 ) 0.00 GPM L/min Options P Pressure taps (2 ports, 1 plug provided) S Vacuum taps (2 ports, 1 plug provided) G LPXX pressure indicator F Floating vacuum indicator M Locking vacuum indicator (indicators not installed) V Viton seals Port Size / 2" NPTF (standard) /8" SE (optional) 32 2" SE Flange (optional) 11.12" (282mm) S-58 E, S-59 E, S-58 MGE = 8.25" (210mm) = 12.25" (311mm) dd 1" (25mm) to outside dimension for element removal. PPLITIONS Designed for most return line applications up to 80 GPM (303 L/min.). lso can be used for lower flow suction line applications. ompatible with petroleum-based oil in mobile and industrial equipment. SPEIFITIONS Operating Pressure: 200 PSI (13.8 ar) max. Operating Temperature: 250 F (121 ) max. Standard Seals: una-n Element rea: 1900 in. 2 (12,259 cm 2 ) Filter Retention: 10 micron nominal 33 micron absolute 10 = micron nominal 67 micron absolute 30 = 4 10 micron glass 12 = 100 ypass Valve Setting F G (Std.) PSID R

19 MRDYNE ORPORTION SPIN ON ELEMENTS MIRO GLSS Series S-20 MG FETURES/ENEFITS Much lower pressure drop Improved efficiencies Higher dirt holding capacity etter performance at low temperatures with high viscosity fluids Long term cost effectiveness PPLITIONS Petroleum fluids Water/oil emulsions HWF Lube oils OPERTION Dirty fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. lean fluid is then directed through the outlet port. n optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination. 5.68" (144mm) REPLELE SPIN-ON ELEMENTS (INLUDES SEL) S-28 MG 10 MIRON SEL ON- TT +2/3 TURN SPEIFITIONS Micron Rating: 10 = 75 ollapse Pressure: 100 PSID Working Pressure: 250 PSID urst Pressure: 350 PSID Media: Micro Glass Dirt Holding apacity: 22 grams VERGE PRESSURE DROP PSID R " (95mm) 0 0 GPM L/min REDUED RESTRITION Resistance to old Fluid Viscosity: 2200 SSU Typical ellulose and Micro Glass Hydraulic Media with the same eta 10 Value Micro Glass enefits DIRT HOLDING PITY apacity vs. Restriction Typical ellulose and Micro Glass Hydraulic Media with the same eta 10 Value Test Rate 25 gpm 19

20 MRDYNE ORPORTION SPIN ON ELEMENTS MIRO GLSS Series S-50 MG FETURES/ENEFITS Much lower pressure drop Improved efficiencies Higher dirt holding capacity etter performance at low temperatures with high viscosity fluids Long term cost effectiveness PPLITIONS Petroleum fluids Water/oil emulsions HWF Lube oils 10.63" (270mm) REPLELE SPIN-ON ELEMENTS (INLUDES SEL) S-58 MG 10 MIRON 6.63" (168mm) OPERTION Dirty fluid enters the inlet port and permeates the filtering medium, causing contaminants to be trapped on its outer surface. lean fluid is then directed through the outlet port. n optional integral bypass valve can be used to protect the element against line surges and high differential pressure due to contamination. SPEIFITIONS Micron Rating: 10 = 75 ollapse Pressure: 100 PSID Working Pressure: 200 PSID urst Pressure: 300 PSID Media: Micro Glass Dirt Holding apacity: 43 grams PSID VERGE PRESSURE DROP R SEL ONTT +2/3 TURN S-58 MGE 10 MIRON 5.06" (129mm) GPM L/min REDUED RESTRITION Resistance to old Fluid Viscosity: 2200 SSU Typical ellulose and Micro Glass Hydraulic Media with the same eta 10 Value Micro Glass enefits DIRT HOLDING PITY apacity vs. Restriction Typical ellulose and Micro Glass Hydraulic Media with the same eta 10 Value Test Rate 25 gpm 20

21 Model MF-360 utomatic Reset MRDYNE ORPORTION FETURES Provides visual warning signal of excessive vacuum condition at pump inlet caused by: contaminated filter element low fluid temperature high fluid viscosity impending opening of filter bypass valve SUTION LINE INDITOR Series MF-360 & ML-360 Model ML-360 Manual Reset Vacuum Settings vailable 2.5" Hg 5.5" Hg 9.5" Hg 13.0" Hg 15.0" Hg 13.0" H2O 25.0" H2O 30.0" H2O DESRIPTION The MF/ML-360 indicators have a red alert sleeve visible from a full 360. In the red alert position, the ML-360 remains locked during system shutdown. The MF-360 does not hold the red alert during system shutdown. Mounted near the pump inlet, Model MF/ML- 360 indicators require no maintenance or calibration, and they resist vibrations and shocks. SPEIFITIONS Operating Temperature: -40 F (-40 ) to 200 F (93 ) continuous Housing: Nickel plated cold rolled steel Sight Dome: Transparent, high impact polycarbonate Vacuum Settings vailable 2.5" Hg 5.5" Hg 9.5" Hg 15.0" Hg 15.0" H2O RESET UTTON 1.88" (48mm) Type ML-360 Manual reset MF-360 utomatic reset MF Hg - F - V Vacuum Setting (inches of Hg or H2O) Optional Viton Seal Fitting Omit for no fitting 3.00" (76mm) 1/4" NPT 3.19" (81mm) 21

22 MRDYNE ORPORTION DIFFERENTIL PRESSURE INDITOR Series D Model DHE Mechanical/Electrical with Housing FETURES Provides visual warning signal of increasing pressure drop across pressure filter assembly indicating: contaminated filter element low fluid temperature high fluid viscosity impending opening of filter bypass valve DESRIPTION ll D Series indicators have a red alert sleeve vivible from a full 360. The DHE and DE are also equipped with a switch and electrical connection that can be used to actuate a remote warning or even activate a complete system shutdown. Mounted in relation to the high pressure filter, the D Series indicators require no maintenance or calibration, and they resist vibrations and shocks. Model DHM Mechanical Only with Housing Model DE Mechanical/Electrical artridge Style Model DM Mechanical Only artridge Style Series Type H Housing artridge M Mechanical only E Mechanical/Electrical D - H - M V Optional Viton Seal (not available on Model DE) Pressure Setting PSID PSID PSID PSID PSID PSID PSID 22

23 1/2" NPTF 5" LEDS 18 GUGE MODEL DHE 1/4-20 UN 2 MOUNTING HOLES (K SIDE) 1/4-20 UN 2 MOUNTING HOLES (K SIDE) 4.35" (110mm) 5.37" (136mm) MODEL DHM LP LP 1.00" (25mm) 1.68" (43mm) 1.00" (25mm) 1.68" (43mm) HP HP 1.44" (37mm) =.75" (19mm) =.52" (13mm) 1/8" NPTF SPEIFITIONS Standard Settings: 10 PSID (.7 R) 15 PSID (1.0 R) 20 PSID (1.4 R) 25 PSID (1.7 R) 30 PSID (2.0 R) 35 PSID (2.4 R) 40 PSID (2.8 R) 1.44" (37mm) =.75" (19mm) =.52" (13mm) 1/8" NPTF 1/2" NPTF 5" LEDS 18 GUGE Operating Pressure: To 5000 PSI (345 R) Operating Temperature: -40 F (-40 ) to 200 F (93 ) continuous Housing: luminum Sight Dome: Transparent, high impact polycarbonate 5.06" (129mm) Electrical (DHE & DE only): 125/250 V 28 VD, 3 amp maximum inductive and restrictive current, normally open 4.06" (103mm) UN UN " (57mm) MODEL DE 2.24" (57mm) MODEL DM.743" (18.87mm) to.746" (18.94mm).743" (18.87mm) to.746" (18.94mm) 23

24 ll along the line... there s Marion To another circuit Intake line filter Pump Relief valve Pressure line filters Differential pressure indicator Rotary actuator Last chance filters Filter breather Return line filter Strainer Low pressure filter Pump ontinuous filtration loop affle MRDYNE ORPORTION sales@maradyne.com Printed in U.S , Marion Fluid Power 24