9mm Size Metal Shaft Multi-ganged Type / Other Specifications

Size: px

Start display at page:

Download "9mm Size Metal Shaft Multi-ganged Type / Other Specifications"

Wilfrid Cain
5 years ago
Views:

1 9mm Size Multi-ganged / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Total esistance Variety (kω) 0 0 esistance Taper esistance taper C otary Notes Can be fitted with center-taps. Dimensions of Terminal H 4. Outline drawing without tap H 4. Outline drawing with tap Mounting height (H): 6.mm (mm and12.mm also available upon request.) For single-unit type with tap is only available with H=6.mm. Tap is on the terminal 3 side only Detail of 2 terminal belong part Dimensions of ushings ushing M6 M7 M9 Dimensions ing pplications For single-shaft only For single and dual-shaft For dual-shaft only Single-shaft Dimension Flat type Style ( diameter: φ6) L 1 L () Models in parenthesis apply to those with a push-on switch and those with a push-on, pushoff switch. Style ( diameter: φ3.) L 1 L () Models in parenthesis apply to those with a push-on switch and those with a push-on, pushoff switch. efer to P.336 for ordering products not listed. 332

2 9mm Size Multi-ganged / Other Specifications In addition to the products listed, we can accommodate the follow specifications. Dimension of Dual-shaft Flat type for inner shaft, slotted type for outer shaft Style (Inner-shaft: φ6 Outer-shaft: φ) Style (Inner-shaft: φ3. Outer-shaft: φ6) L 1 L 2 L otary L 1 L 2 L pplications oth switchless and rotary switch models are available. Dimensions of with Push-lock Mechanism/Switch L 1 L 2 (.7) 4. (.7) 7 3 (1.7) 12 Dimensions in unlocked state ing Example of uses Note Marked are specifications recommended by lps. 333

3 9mm Size Multi-ganged / Switch Specifications Switch type Contact arrangement otary switch Push-on push-off switch Momentary push switch Single pole and single throw Single pole and single throw Single pole and single throw Double pole and double throw Travel 0 m a x. 1.±0.mm mm 1.±0.mm ±0.mm Changeover force 0mN m max. 12±N N ±2N N max. otary Electrical performance life under load ating Contact resistance Insulation resistance Voltage proof 3 16V DC (m 16V DC min. ratings),000 cycles,000 cycles,000 cycles 3 16V DC (m 16V DC min. ratings) 0. 12V DC (m 12V DC min. ratings) 0mΩ max. for initial period, 0mΩ max. after operating life. 0MΩ min. V DC 0V C for 1 minute V DC 9mm Size Multi-ganged / ttached Parts The following parts are included with the product. Nut Washer 2 0. ing 0.7 earing screw Dimension diameter M6 M6 M7 11 M7 M9 11 M9 earing screw Dimension diameter M6 φ φ6.2 M7 φ12 φ7.2 M9 φ14 φ

4 9mm Size Multi-ganged / Configuration Chart ushing Outer-shaft control section Inner-shaft actuator Outer-shaft variety Single-unit Dual-unit Tone/Prefader otary Single-unit Dual-unit Vol./Tone Inner-shaft variety otary switch With switch Push-on push-off switch Momentary push switch 0.mm travel 1.mm travel ttached mechanisms Push-lock mechanism ing Note The single-shaft type product lineups are the same as those in the inner-shaft variety. 33

5 9mm Size Multi-ganged / Ordering Products Not Listed When ordering product varieties that are not listed, specify referring to the examples below. Sample Part Number K F 1 C Model type otary Model type 111 Single-shaft single-unit 121 Single-shaft dual-unit for tone 122 Single-shaft dual-unit for vol. Switch specifications Switch specifications 0 Without switch 1 2 With rotary switch With push-on push-off switch 4 With momentary push switch (0.mm travel) T U With push-lock mechanism * Push on switch 1.mm stroke is individually specified. type F type Flat (shaft diameter : 6) * diameter 3. is individually specified. Length of the shaft L1 (mm) 1 Length of the shaft 1 2 Length of the shaft 2 ing C0 Without C1 Center * With rotary switch; for applications in types other than push-lock mechanism. esistance taper esistance taper 1 1 V C esistance taper 3 1C * The resistance taper for rotary switches are individually defined. : For tone & general (model type : 111, 121) V: For vol. (model type : 111, 122) J 0 (%) Output volt.across term.1-2 Input volt. across term (1) V(vol.control)(3) (1) 0 (%) J Output volt.across term.2-3 Input volt. across term C(1C) Term."1" otation travel (%) J Term."3" Term."1" otation travel (%) J Term."3" 3 3 (k Ω) 03 4 (k Ω) 0 0 Notes 1. Marked are specifications recommended by lps. 2. The above specification is only applicable to the one-shaft single-unit model and dual-unit ganged model. 336

Provides a superior operational feel with high-speed tracking in motor drive mode.

for Fader Control of s Motor-driven Master Type Motor N Fader, Motor K Fader RS N M/RS0K V Series Provides a superior operational feel with high-speed tracking in motor drive mode. Typical Specifications