Fig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
|
|
|
- Rudolf Burns
- 5 years ago
- Views:
Transcription
1 LIGHT TOGGLS Fig Fig. Figure -00-U -0-U -0-U -0-U --U --U --U --U --U --U --U --U -0-U --U --U --U Poles/ MPS Throws VC Fig. Fig. Style L uckbill L uckbill L uckbill L uckbill L Paddle L Paddle L Paddle L Paddle Lighted Green L Lighted mber L Lighted lue L Lighted Green L Lighted mber L Lighted lue L Lighted Green L Lighted mber L Lighted lue L Lighted Green L Lighted mber L Lighted lue L ushing Length QC.7 /Solder QC.7 /Solder QC.7 /Solder QC.7 /Solder Hardware Page/ C C C C Note: ll figures are for illustration purpose only, and the number/type of terminals may vary =Knurled Nut LIGHT ROCKR Fig Figure -70-U -7-U -7-U -7-U Poles/ MPS Throws VC Style L Oval Rocker L Oval Rocker Lighted Green L L Oval Rocker Lighted mber L L Oval Rocker Lighted lue L ushing Length Note: ll figures are for illustration purpose only, and the number/type of terminals may vary =Knurled Nut 7 Phone ()-900 Fa ()-90 ll quantities are single; U s are packages of Unless otherwise noted. Hardware Page/
![] ( to ) 0.7 (.) 0. (7.) 0.77 (9.) + _ 0.](/docs-images/87/96011330/images/2-9.jpg "() 0. (.) 0.7 (.7) 0. () Thickness [0.")
![09 to 0.7] ( to ) 0. (.) 0. (.) -70-7 -7-7.](/docs-images/87/96011330/images/2-13.jpg ". (7.7) () GN 0.0 (0.) 0.0 (0.) Load Supply 0.")
2 LIGHT TOGGLS (Cont.) 0.7 (7) 0.7 (M) 0.07 (.) 0.7 (9.) 0. (.) 0.7 () 0. () 0.0 (.) 0. () () Pw c Gn.0 (0.) 0.0 (.) 0. (.) 0.9 (.) 0. (.) 0.7 (M) 0.7 (7) 0. (.) 0. () Pw c Gn.0 (0.) 0.0 (.) 0.0 (.) 0. () 0. (.) 0.9 (.) C 0.07 (.) 0.7 () 0.7 () () () (.) 0.0 (.) 0.07 (.) 0.0 (.).0 (0.) 0. (.). (). () 0.90 () 0.7 (9.) # () () 0. (.7) 0.9 () 0.79 (.) L 0.07 (.) 0. (.) # 0.07 (.) 0.0 (0.) 0. (.) 0. () 0 Vdc 0.9 () 0.7 (9) 0.7 (M) 0. (.) 0.7 () 0.0 (.) 0. (9.7) # () 0.09 () 0.07 (.) 0. (). (0.) # L Solder s Thickness [0.079 to 0.] ( to ) 0.7 (.) 0. (7.) 0.77 (9.) + _ 0. () 0. (.) 0.7 (.7) 0. () Thickness [0.09 to 0.7] ( to ) 0. (.) 0. (.) (7.7) () GN 0.0 (0.) 0.0 (0.) Load Supply 0. (.) For the latest information ll quantities are single; U s are packages of Unless otherwise noted. 79
![70 Ω K Ω.K Ω (In Series) Resistor Chart [for - and -] for C usage L. MINITUR ROCKRS Fig.](/docs-images/87/96011330/images/3-6.jpg "Fig. Fig.")
3 LIGHT MINITUR ROCKRS Fig Figure -0-U --U --U --U --U Fig. Poles/ MPS MPS Throws VC 0VC Lighted Orange L Lighted Green L QC.7 /Solder QC.7 /Solder QC.7 /Solder Solder yelet Solder yelet Page/ When operating a L from an C voltage, a diode must be used in addition to a resistor. Notes: ()/()=Momentary / -0, - and - (In Series) Resistor Chart for -0, - and - for C usage (pilot lamp). iode for C usage. Forward Current Reverse Intensity Recommended Voltage VF IL VR MC V V V. V m V. typ. 70 Ω K Ω.K Ω (In Series) Resistor Chart [for - and -] for C usage L. MINITUR ROCKRS Fig. Fig. Fig. Fig U -0-U -0-U --U -0-U -0-U -0-U -09-U -7-U -7-U --U --U --U -07-U --U Fig. 9 Fig. Fig. 7 Figure () Poles/ mps mps Throws VC 0 VC * Fig. Plastic Plastic Plastic /Red Indicating Red Plastic Red Plastic Plastic Plastic White Plastic QC.7 QC.7 QC.7 QC.7 QC.7 QC.7 QC.7 QC.7 QC.7 Imprinting and Marking Red O White O White O O Notes: ()=Momentary */ VC, / = Not Rated Note: ll figures are for illustration purpose only, and the number/type of terminals may vary. 0 Phone ()-900 Fa ()-90 ll quantities are single; U s are packages of Unless otherwise noted Page -C -C -C F -F -G H -H
![7 /Solder - - 0.7 (9.) hole [0.0 to 0.0] (0.7 to.) 0.](/docs-images/87/96011330/images/4-10.jpg "7 (.) POXY 0.0 (0.) 0.09 (0.) s 0. (.7) 0. (.7) Twisted Q.")
![(.7) - -70 0. (.) 0. () 0. (.).77 (7). (.) [.7.0] (.7 0.](/docs-images/87/96011330/images/4-26.jpg "79) -.0 (.7). (7.) F 0.0-0.0 (0. -.) 0.0-0.079 (. - ) 0.")
4 LIGHT MINITUR ROCKRS (Cont.) 0. () 0. () 0.77 (9.) 0.0 (0.) L Term 0.0 (0.) 0.9 (7.) 0. (9) () 0.7 () 0. () 0. () 0.7 (.) 0.0 (.) 0.9 () L Term 0. () 0.07 (.) 0.7 (.7) C = node (+) of L 0.7 (.) 0.77 (9.) (.) 0.7 (7.) 0. () 0.07 (.) im. X (0,7) (,) 0.7 (9,) (,) (,0) 0.7 (9,) (,0) (,00) 0.70 (9,) (.) Twisted Q.C. s 0. (.) 0.9 (.) 0. (.) 0.9 (.) PNL THICSS MINITUR ROCKRS (Cont.) X Cathode (-) 0.0 (.) 0.9 (.7) II III Solder yelet L Term 0.7 (7) QC.7 /Solder (9.) hole [0.0 to 0.0] (0.7 to.) 0. 7 (.) POXY 0.0 (0.) 0.09 (0.) s 0. (.7) 0. (.7) Twisted Q.C. s PNL CUT-OUT 0.07 (.9) 0. (.7) 0.0 (.) (.) (.) (.90) im. X -7-7 QUICK CONNCT H RRIR. (9.) G.0 ().0 (.). (.).0.7. (.) (0.79.7).7 (.).9 (9.9).9 (). (.).0 (.9). (7.).0 (.) ia. Typ..7.0 ( ) () 0.9 () 0.0 (.) 0.9 (.7) 0.7 () 0.9 (.) 0.7 (7) im. X Panel Thickness 0.0 (0.) im. 0. (.) im..9 () QUICK CONNCT. (.7) (.) 0. () 0. (.).77 (7). (.) [.7.0] ( ) -.0 (.7). (7.) F (0. -.) (. - ) ( - ).0 (.) 0. (.).0 (.).0 (.) 0. () 0.7 () im. X (0,7) (,).7 (9,) (,) (,0).7 (9,) (,0) (,00).70 (9,) For the latest information ll quantities are single; U s are packages of Unless otherwise noted.
5 STNR PPLINC ROCKRS / Fig. Fig Fig. 7 Fig. Fig. -70-U -9-U -9-U -9-U -00-U -00-U --U --U -0-U --U -0-U -0-U -0-U -70-U -0-U -90-U -9-U -7-U -7-U --U -0-U -9-U --U Fig. Fig. Fig. Fig. 7 Notes: ()=Momentary */ /0VC Poles/ MPS MPS Throws VC 0VC () * Fig. () () () () () () White Poles/ MPS MPS HP / Throws VC 0VC 0VC / / / / -/ / / / / / / / / / Poles/ MPS MPS Throws VC 0VC () () HP 0 VC / Fig. Material Imprinting and Marking Material Material Red Poly Plastic Plastic = Not Rated ll of the bove have Quick Connect.0 s Page - -- & -C - -- & -C - Imprinting and Marking Page C - & -C -C - & -C Imprinting and Marking White / Page - -F -F -G Red / Red / 77VC and H.P.@ 0VC Note: ll figures are for illustration purpose only, and the number/type of terminals may vary. Phone ()-900 Fa ()-90 ll quantities are single; U s are packages of Unless otherwise noted.
![7 [0. -.7] 0.0 (.).](/docs-images/87/96011330/images/6-7.jpg "0 [] -7-7 Red / Red /.")
![7 [9.].9 [].7 [.].07 [7.](/docs-images/87/96011330/images/6-8.jpg "] 0.0 (.) 0.0 (.) -. [.")
![] Panel Thickness 0.](/docs-images/87/96011330/images/6-9.jpg "00 to 0.0 F (.) (.7). (.) -9 (.")
6 STNR PPLINC ROCKRS (Cont.) -70. [.] 0.0 Q. C. Tab C Panel Thickness.0 [0.] to. [.] Panel Cut-out [.7] Panel Thickness [0. -.7] 0.0 (.).0 [] -7-7 Red / Red /.7 [9.].9 [].7 [.].07 [7.] 0.0 (.) 0.0 (.) -. [.] Panel Thickness 0.00 to 0.0 F (.) (.7). (.) -9 (. /.) (. /.). (9.) Panel G - Panel Thickness: 0.0 to 0.7 For the latest information ll quantities are single; U s are packages of Unless otherwise noted.
7 LIGHT PPLINC ROCKRS S Fig. Fig. Fig. Fig. Fig. Fig. 7 Fig. Fig. 9 Fig. Fig U --U -9-U --U --U --U --U -9-U -790-U --U -70-U -70-U --U --U -7-U mps mps HP HP 0 HP Fig. Poles/ Throws VC 0 VC VC 0 VC VC ** White w/ Red L / w/lighted mber / Lighted mber / Lighted Green / / / * ^ Lighted mber / * w/red Lens 7 Lighted mber 9 w/red Indicator / Red w/ White ot Notes: *uilt-in Resistor ^ additional (-0)Vac Heater rating **Rated 0VC ***Requires eternal resistor and diode for C applications (not included) Incdt= Ne=Neon =Not Rated Material Plastic Plastic Plastic Plastic The s for the above parts are ecept - isisqc Solder.7. ecept for -9.7 and and-9 -isis QC both QC sizes. Note: ll figures are for illustration purpose only, and the number/type of terminals may vary. Voltage V Incdt *** V Ne V Ne V Incdt V Incdt V Ne V Ne V Ne V Ne V Ne V Ne V Ne V Ne V Ne Phone ()-900 Fa ()-90 ll quantities are single; U s are packages of Unless otherwise noted. Page/ -- & -H - -C F -F -G --H & -H - & -H -H -I -J -K
![.7 [9.] volts incandescent LIGHT PPLINC ROCKRS (Cont.](/docs-images/87/96011330/images/8-17.jpg ") -0 volts incandescent 0.0 (.")
![9 (.). (.). [.7]. (0.0) 0. (0.0) Tabs o Not Solder ulb - V Neon GR Watts (min) / / / /.](/docs-images/87/96011330/images/8-22.jpg "0.0 RΩ 0 0 00 0.00 Switch Panel Cutout 0.0.07 (7.) 0. (.) 0.0 (.) V Neon H. (.) 0.0 (.).07 (7.). (.) -9 Internal Resistor I ulb.")
![(). [.7] V Neon -70-70.7 [9.] C. (.97) -9-790.09 [.7] ia. F K - -7 0.7 [.7] 0.](/docs-images/87/96011330/images/8-25.jpg "0 [].07 [.9] I -.70 [.].90 [.] mber 0.0 (.).07 [7.].9 [].")
![9 [] V Neon ottom of Switch V Neon. [.]. [.] mber. [.] Panel Thickness 0.](/docs-images/87/96011330/images/8-29.jpg "00 to 0.0... (.) V Incand. - - V Neon - 0. - - - - J.079 () (.). (9.) R0. (R.")
8 .7 [9.] volts incandescent LIGHT PPLINC ROCKRS (Cont.) -0 volts incandescent 0.0 0V 0.0 (.) Internal Resistor ulb - Must use resistor in series with L... See Chart elow: Vdc V..C. 7 (.0) 9 7. (0.). (0.) (0.). (0.) Internal Resistor.9 (.). (.). [.7]. (0.0) 0. (0.0) Tabs o Not Solder ulb - V Neon GR Watts (min) / / / /.0.0 RΩ Switch Panel Cutout (7.) 0. (.) 0.0 (.) V Neon H. (.) 0.0 (.).07 (7.). (.) -9 Internal Resistor I ulb. (). [.7] V Neon [9.] C. (.97) [.7] ia. F K [.7] 0.0 [].07 [.9] I -.70 [.].90 [.] mber 0.0 (.).07 [7.].9 [].9 [] V Neon ottom of Switch V Neon. [.]. [.] mber. [.] Panel Thickness 0.00 to (.) V Incand. - - V Neon J.079 () (.). (9.) R0. (R.). (0). (9.).7 (.) 0.0 (.). (.) 0.0 (.).9 (). (7.). (.) For the latest information ll quantities are single; U s are packages of Unless otherwise noted. Lit window V Neon
9 UTOMOTIV/MRIN ROCKRS Sealed with Gasket Fig. Fig. ly Vac switch has RU / CS markings Fig. -0-U --U -90-U -00-U -0-U --U --U --U --U -0-U --U -0-U () --U () -0-U () --U () -0-U () () --U () () -70-U () () -7-U () () Poles/ Throws mps HP mps mps VC 0 VC VC 0 VC / Notes: For replacement gasket use part number ()=Momentary mber Green Red lue mber Green Red lue mber Green Red lue mber Green Red lue Voltage V V V V V V V V V V V V V V V V Page/ & ll above parts have nylon actuators ROUN ROCKRS Fig. Fig U -0-U -0-U -0-U -0-U -0-U -07-U --U Notes: ()=Momentary Fig. 7 () Fig. MPS HP 0 Poles/ MPS Throws VC 0VC VC Red (Lighted)* Green (Lighted)* mber (Lighted)* lk w/red Indicator* Fig. Imprinting and Marking White -O=(See Fig) None *=V Note: ll figures are for illustration purpose only, and the number/type of terminals may vary. Phone ()-900 Fa ()-90 ll quantities are single; U s are packages of Unless otherwise noted. Fig. 7 Page/ 7-C QC C QC QC QC QC F QC C QC G QC
10 UTOMOTIV/MRIN ROCKRS (Cont.).0 (.).9 (9.) Same ody imensions as dwg.9 (9.9).9 (.) Lens Lit own. (.).0 (0.7). (9.7) 0.0 (.) -0 s &7 ROUN ROCKRS (Cont.) C (.7) V -0-0 F. ().9 (.). (.7).0 (.9).97 (). (.7). (.). (.7).7 (9.) - G. (.7) V For the latest information ll quantities are single; U s are packages of Unless otherwise noted. 7
Fig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
LIGHTED TOGGLES Fig. -00-0 -0-0 - - - - - - - - -0 - - - Fig. Figure -00-BU -0-BU -0-BU -0-BU --BU --BU --BU --BU --BU --BU --BU --BU -0-BU --BU --BU --BU Poles/ AMPS Throws VDC Fig. Fig. Style LED Duckbill
SERIES. LED-Lit Push-Button Switches and Indicators. switches and indicators. SERIES 2 PRODUCT LINE-UP
LED-Lit Push-Button Switches and Indicators SERIES 2 LED-lit (DC and 24Vac) switches and indicators. You can build the product best suited to your specifications by combining standard parts Selection of
SWITChES NSiMASTER.indd /4/09 10:58:08 AM
SWIThS switches switchs roker, & Misellaneous swithes T. UP O IRUT UN. POLS & MPS 12 V MPS 20 V RTINGS 12-20 V VOLTG LMP OLOR TR. ONTT ONN. TYP 77010RQ 77010 on off PST 20 10 1 1 /2 @12,2 @ 20 non-lighted
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Butt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
Tippette Full Sized Rocker Switches
Tippette Full Sized Rocker Switches The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications
Switches. Introduction
Introduction Switches Manufactured from Stainless Steel, ulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS
00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
Indicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
RoHS. Specifications. Part Number Configurator
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 48VDC Electrical Life: 50,000 Cycles Contact Resistance: 50mΩ Max. Insulation Resistance:
Tippette Switches. Tippette Switches. Agency Certifications. Mounting. Carling Technologies
Tippette Switches Electrical Contact Rating........ 15 amps, 125 VC 10 amps, 250 VC 3/4 HP 125250 VC 15 amps, 1230 VDC Life................ 25,000 cycles circuit dependent 50,000 cycles circuit dependent
3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
Indicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
No. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC
Medium & ight-duty Toggle es Great for household appliances and equipment Bat toggle switch, 774007, is ideal for battery-powered equipment including trimmers and lawn mowers ire leads are #18 AG, 6 in.
D. S. HULL COMPANY, INC
M484-BP M493-BP M584-BP 5582-BP 55020-BP 55088 Toggle Switches Cole Hersee Standard Toggle Switches Non-corrosive construction throughout. Durable, moisture repellent plastic housing. Silver contacts.
ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
RoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
800 T P B H 16 R. Momentary Contact Push Button Devices, Illuminated. 8 Rockwell Automation Publication 800-TD009A-EN-P
Momentary Contact Push utton Devices, Illuminated Extended Head Without Guard Cat. No. 800T-P16R Extended Head without Guard Cat. No. 800H-PR16R 800 T P H 16 R a Protection Rating T Metal, Type 4/13 H
Non-illuminated Push Buttons
Non-illuminated Push Buttons 3 Accessories for push buttons Lockout attachment Contact block kits Lens kits Wobblestick kit Push Button Cap Interchangeable, snap-in design Protective caps 9 colors: red,
onlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size
Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
MINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
Compact SE Overview. High-Performance Dimming. Ballast
Compact SE Overview CompactSE 01.10.10 For designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your solution.
Table of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
SWITCHES SECTION. Fuse Holders. Toggle Switches - Screw Terminals. Fuses. Toggle Switches - Blade Terminals. Terminal Block - Junction Box
SWITCHES Toggle - Screw s Toggle - Blade s Toggle (arine) - Blade s Lighted Toggle (arine) Contura III Rocker (arine) Toggle - icro Switch Key Switch Push-Pull Switch Push Button Switch Weatherproof Boots
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
L-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON
Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
Series 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
LED Meteor Pool Lights
LE Pool Lights LE Pool Lights The ARTECTA pool lights are the world's first compact ultra-thin LE underwater fixtures, equipped with an integrated driver. The fixtures can be mounted on a flat surface,
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
Bright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
JAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
Allen-Bradley 800T-FXD16RA1
NEM Push utton Specifications 800T/H 30.5 mm Push uttons 2-Position Push-Pull and Push-Pull/Twist Release Devices, Illuminated Note: jumbo or large legend plate is recommended, if space allows. Illuminated
Miniature Stainless Steel Vandal Resistant
Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
Push buttons at a glance
104P Push Buttons Push buttons at a glance Contents The inside story....................... 1 Hot buttons........................... 2 Non-illuminated push buttons........... 3 Illuminated push buttons...............
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Functions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
385 & 962 Series The lectroaire valve is a compact, air operated, electrically lectroaire valves can be remotely mounted for control of double acting
Model Number Index Housing Series Type ort Variation Voltage 962 2 001 40 Series Solenoid Operated Housing Type 962 Valve less racket 972* Valve less racket 902 Valve less racket 385 Valve with racket
03561 SPEED BOOSTER INSTRUCTION MANUAL. for the Ultra Tugger
INSTRUCTION MANUAL NRTL/C LR 91904-8 03561 SPEED BOOSTER for the Ultra Tugger Read and understand all of the instructions and safety information in this manual before operating or servicing this tool.
Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
Micro Switch. NR SERIES ROCKER SWITCH 3-POSITION FLUSH-PANEL MOUNT, SCREW TERMINALS 1NR * Off 2-3* $24.58
Micro SEALED TOGGLE AND ROCKER SWITCHES A sealed switching chamber enables these toggle and rocker switches to comply with UL 508, paragraph 13.3 hosedown test. These switches survive where panels are
ø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
Genesis Series Valves Parts List / Service Instructions
Genesis Series Valves Parts List / Service Instructions INDEX PAGE General Warnings and Cautions......................................................... 2 Model Number Index...................................................................
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
1.2. Pushbuttons and Indicating Lights. Contents Description Environmentally Sealed Toggle Switches E10E Product Selection
Toggle Switches E0E Contents Description Product Selection Molded-In Screw Terminal............. Econoswitch................................................ Technical Data and Specifications..........
Attractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
Indicator Lights Neon, LED and Filament Lamp
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
DOWN Position. Base Circuit See Page V11-T4-35. (Keyway) 1PST ON NONE OFF A (8.74) (11.91)
. Toggle Switches General Purpose Toggles Rated Product Selection Rated Toggle SwitchesSingle-Pole Rating 6, 5 Vac, 50 Vac 0, 50 Vac / hp, 50 Vac 5, 5 Vac 0, 50 Vac / hp, 50 Vac / hp, 5V Vac 5, 5 Vac 0,
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
Pushbuttons B3. Options and ordering codes. Exploded view. BS 3. Green
Pushbuttons 3 IP65 protection Opaque or illuminated Metal or lack bezels Snap-on contact blocks Colour coded contacts Pushbutton stations International approvals including UL and CS Options and ordering
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
A L - J R M - 24D - 2
Switch A16 Mounting Aperture of 16 mm Modular construction ( + Case + Lamp + Switch) Wide Variety of Control and Signal Devices: Lighted, Non-Lighted, and Buzzer UL and cul approved. Conforms to EN60947-5-1,
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
22mm Push Buttons and Switches
PUSH UTTONS/SWITCHES 22mm Push uttons and Switches Emergency Stops Selector Switches Lever Type Small Head 71.4 2 positions Large Head 3 positions unit: mm S2ER E3 R A D Size CONTACT LOCK * S2SR S 3 R
600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings