Tippette Full Sized Rocker Switches
|
|
|
- Victor Jones
- 5 years ago
- Views:
Transcription
1 Tippette Full Sized Rocker Switches The Tippette Series is a traditionally styled rocker switch, available in sealed or unsealed versions. These switches are appropriate for use in general purpose applications which may or may not require a modicum of environmental protection. The Tippette Series is available in both illuminated and non-illuminated versions and features a wide variety of circuits, actuator styles and bracket options. This versatile offering includes international agency certifications and ratings to 26 amps for select circuits. Carling Technologies, Inc. 60 Johnson venue Plainville, CT Phone: (860) Fax: (860)
2 2 Tippette Switches (,TIH,TII & LTIL,L) - General Specifications Electrical Contact Rating Life Contacts Terminals Mechanical Endurance 15 amps, 125 VC 10 amps, 250 VC 3/4 HP VC 15 amps, VDC 25,000 cycles circuit dependent 50,000 cycles circuit dependent consult factory for applicable circuits. Fine silver, silver cad-oxide Brass or copper/silver plate 1/4 (6.3mm) Quick Connect terminations standard. Solder lug - Brass Tin Plated Wire Lead 16 gauge standard 105 C 600VC Screw Terminals - Brass 100,000 cycles minimum Physical Lighted Seals Base Rocker/Bracket gency Certifications Mounting MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness:.040 min max. Incandescent - rated 10,000 hours Neon - rated 25,000 hours Bracket - ctuator WBL/MBL optional external gasket panel seal Phenolic (150 C) Nylon 66 (105 C) Select circuits and constructions with IEC approvals are available. Consult factory 1.190[30.22].830[21.08] 1.450[36.83].680[17.27] 55 4 plcs * *ngled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. *Manufacturer reserves the right to change product specification without prior notice.
3 /TIH/TII & LTIL/L-Series Rocker & Paddle Switches Base Part Number 6M 2 ctuator Style BL 3 ctuator Color MBL 4 Bracket 1 BSE PRT NUMBER: SERIES/POLES/CIRCUITRY 8,11,13 /RTING 7 /TERMINTION VC, VC, 3/4 HP VC, VDC 7 Single Pole in Double Pole base 2 Double Pole solder.250 screw wire solder.250 screw wire lug tab term. leads lug tab term. leads On-None-Off K50 K51 K54 K55 5 5B 5E 5F (On)-None-Off K5 K5B K5E K5F 5L 5M 5S 5T On-None-(Off) K5L K5M K5S K5T B50 B51 B54 B55 On-None-On L50 L51 L54 L55 B5 B5B B5E B5F On-None-(On) L5 L5B L5E L5F C50 C51 C54 C54 On-Off-On M50 M51 M54 M55 C5 C5B C5E C5F On-Off-(On) M5 M5B M5E M5F C5L C5M C5S C5T (On)-Off-(On) M5L M5M M5S M5T Three Pole Four Pole solder.250 screw wire solder.250 screw wire lug tab term. leads lug tab term. leads TIHK50 TIHK51 TIHK54 TIHK55 On-None-Off TIIK50 TIIK51 TIIK54 TIIK55 TIHK5 TIHK5B TIHK5E TIHK5F (On)-None-Off TIIK5 TIIK5B TIIK5E TIIK5F TIHK5L TIHK5M TIHK5S TIHK5T On-None-(Off) TIIK5L TIIK5M TIIK5S TIIK5T TIHL50 TIHL51 TIHL54 TIHL55 On-None-On TIIL50 TIIL51 TIIL54 TIIL55 TIHL5 TIHL5B TIHL5E TIHL5F On-None-(On) TIIL5 TIIL5B TIIL5E TIIL5F TIHM50 TIHM51 TIHM54 TIHM54 On-Off-On TIIM50 TIIM51 TIIM54 TIIM55 TIHM5 TIHM5B TIHM5E TIHM5F On-Off-(On) TIIM5 TIIM5B TIIM5E TIIM5F TIHM5L TIHM5M TIHM5S TIHM5T (On)-Off-(On) TIIM5L TIIM5M TIIM5S TIIM5T VDE PPROVED VC, VC, 12(6) 250VC T85 Single Pole in Double Pole base 2 Double Pole solder.250 wire solder.250 wire lug tab lead lug tab lead On-None-Off K90 K91 K95 B90 B91 B95 On-None-On L90 L91 L95 C90 C91 C95 On-Off-On M90 M91 M95 dditional ratings up to VC, 1 1/2HP 125 VC, 2HP 250VC are available. Consult factory for specifics. 2 CTUTOR STYLE 1S ngular/smooth Face Gloss 12 1C ngular/cross Serations Gloss 12 1F Flatted/Smooth Face Gloss 12 1L ngular/longline Serrations Gloss 1,12 2L Long Smooth/Narrow 15 6M Curved/Smooth Face Matte 3 6S Curved/Smooth Face Gloss 3 7S Rounded Paddle/Smooth Face Gloss 1 7N Witch s Hat/Narrow 15 7P Witch s Hat/Wide 15 3 CTUTOR COLOR 9 BL black WH white RD red 4 BRCKET STYLE 9 Screw Mount 5 B Screw Mount 5,12 C Screw Mount 5 H Screw Mount 5 NBL Nylon Black WBL Watershedding Black 4 MBL Marine Style Black 4,6 FN Metal Snap-In 5 FN BLK Black Metal Snap-In 5 FN SS Stainless Steel Snap-In 5 FW Wide Stainless Steel Snap-In 5 Notes: 1 NBL, FN, & FW brackets only. 2 For single pole switch in a single pole base, specify TIL with single pole circuitry/rating/termination. 3 NBL, WBL, & MBL brackets only. With 6M actuator, brackets also will be matte finish. 4 6M & 6S actuators only 5 Not available with 6M & 6S actuators. 6 Consists of WBL bracket, neoprene seal, and dummy rivets at open holes. Consult factory for agency approval status. 7 ll ratings are appropriate for usage in low voltage applications. 8 For additional special circuits, see page 21...?!?!?! 9 Custom colors are available, consult factory tab and PC terminations are also available. Consult factory for catalog number callout. 11 ( ) momentary 12 Not available with WBL or MBL style brackets. 13 dditional circuits available. See page vailable with bracket, C or H only. 15 Not available with MBL, WBL or H brackets. Can be supplied as a double rocker to control separate poles of a,tih or TII switch. Consult factory for details. LTIL51 1 Base Part Number 6M 2 ctuator Style BL 3 ctuator Color RC 4 Lens Color MBL 5 Bracket 12V 6 Lamp Voltage 1 BSE PRT NUMBER: SERIES/POLES/ILLUMINTION/CIRCUITRY 12 /RTING 10 /TERMINTION VC, VC, 3/4 HP VC, VDC illuminated Single Pole in Double Pole base illuminated Double Pole solder.250 screw wire solder.250 screw wire lug tab term. leads lug tab term leads LTIL50 LTIL51 LTIL54 LTIL55 On-None-Off LK50 LK51 LK54 LK55 LTIL5 LTIL5B LTIL5E LTIL5F (On)-None-Off LK5 LK5B LK5E LK5F LTIL5L LTIL5M LTIL5S LTIL5T On-None-(Off) LK5L LK5M LK5S LK5T LTILB50 LTILB51 LTILB54 LTILB55 On-None-On LL50 LL51 LL54 LL55 LTILB5 LTILB5B LTILB5E LTILB5F On-None-(On) LL5 LL5B LL5E LL5F LTILC50 LTILC51 LTILC54 LTILC55 On-Off-On LM50 LM51 LM54 LM55 LTILC5 LTILC5B LTILC5E LTILC5F On-Off-(On) LM5 LM5B LM5E M5F LTILC5L LTILC5M LTILC5S LTILC5T (On)-Off-(On) LM5L LM5M LM5S LM5T dditional ratings up to VC, VC, 3/4 HP 125 VC, 1HP 250VC are available. Consult factory for specifics. Three pole switch is also available: Substitute H for fourth digit of part number. ex. LTIHK51 Notes: 1 NBL, FN, & FW brackets only. Double pole circuits provided with 3 pole base. 2 LTIL-Series with NBL, FN, & FW brackets only. 3 NBL, WBL, & MBL brackets only. With 6M actuator, bracket will also be matte finish. 4 1S, 1C, 1L & 7S with NBL bracket only available with LTIL-Series. 5 6M, 6S actuators only. 6 Not available with 6M and 6S actuators. 7 Not recommended with neon lamps. 8 Consists of WBL bracket, neoprene seal, dummy rivets at open holes. Consult factory for agency approval status. 9 Not recommended with blue or green lenses. 10 ll ratings are appropriate for usage in low voltage applications. 11 Custom colors and additional bracket styles are available, consult factory. 12 ( ) - momentary 13 ll double throw circuits supplied with two lenses. To specify two different lens colors, specify second color, after first color. (ex. LM51-6S-BL-RC/GN-WBL-12V) tab and PC terminations are also available. Consult factory for catalog number callout. 2 CTUTOR STYLE 4 1S ngular/smooth Face Gloss 1 1C ngular/cross Serations Gloss 1 1L ngular/longline Serrations Gloss 1 6M Curved/Smooth Face Matte 3 6S Curved/Smooth Face Gloss 3 7S Rounded Paddle/Smooth Face Gloss 2 3 CTUTOR COLOR 11 BL black WH white RD red 4 LENS COLOR 13 M amber RC red GN green 7 LU blue 7 CL clear WH white 5 BRCKET STYLE 11 NBL Nylon Black WBL Watershedding Black 5 MBL Marine Style Black 5,8 FN Metal Snap-In 4,6 FN BLK Black Metal Snap-In 4,6 FN SS Stainless Steel Snap-In 4,6 6 LMP VOLTGE neon 9 125N 125 volt 250N 250 volt incandescent 6V 6 volt 12V 12 volt 18V 18 volt 24V 24 volt 28V 28 volt
4 4 Tippette Rocker & Bracket Styles 1C CROSS-LINE W/ONE LENS 1L LONG-LINE W/ONE LENS 1S SMOOTH W/ONE LENS.418[10.62] 1.440[36.58] 1.440[36.58].312[7.92] WITH.250 TB ND NBL BRCKET WITH SOLDER LUG TERMINL ND NBL BRCKET WITH.250 TB ND NBL BRCKET 1F FLTTED STYLE NO LENS 6M, 6S CURVED W/ONE LENS 7S TOGGLE-STYLE W/ONE LENS.900[22.86].900[22.86] 1.570[39.88].356[9.04] 1.570[39.88].060[1.52].418[10.62].828[21.03].060[1.52] 1.080[27.43] 1.080[27.43] 1.440[36.58].312[7.92] WITH.250 TB ND FN BRCKET WITH SOLDER LUG ND NBL BRCKET WITH.250 TB ND FN BRCKET
5 Tippette ctuator Styles 5.125[3.18] DI.075[1.91] DI.055[1.40] DI.330[8.38].437[11.09].394[10.00].392[9.95].372[9.45].187[4.74].250[6.35].187[4.74] SOLDER LUG.250 TB (Q.C.).187 TB (Q.C.).820[20.82] TERMINL TYPE #6-32NC-2 THRED.141[3.58] 6.000[152.40].187[4.75].370[9.39].286[7.26].500[12.70].350[8.89].187[4.75] 1.190[30.22].680[17.27] SCREW (SSEMBLED) WIRE LED PRINTED CIRCUIT.490[22.86].075[1.905] IEC PPROVED CONSTRUCTION ( ONLY).830[21.08] 1.450[36.83] 55 4 plcs* MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness:.030 min max. Switch should be mounted at 90 for maximum water shedding (45 to 90 acceptable) * ngled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. 1L TIL,,TIH,TII.312[7.92] 1C TIL,,TIH,TII 1S TIL,,TIH,TII 1.024[26.00] 1F, TII.300[7.62] 2L TIL,,TIH,TII.430[10.90] 6S.630[16.00].250[6.35] 1.035[26.28].996[25.30] 7S.880[22.40] 7N.880[22.4] 7P SPECIL CIRCUITS FOR TIPPETTE ROCKER SWITCHES Circuit Position 1 Position 2 Position 3 Progressive Two Circuit GG BOTH CIRCUITS ON ONE CIRCUIT ON OFF GG BOTH CIRCUITS (ON) ONE CIRCUIT ON OFF Single Pole Triple Throw GE ON ON ON Two Circuit GH CIRCUIT 1 ON BOTH CIRCUITS ON CIRCUIT 2 ON GP CIRCUIT 2 ON CIRCUIT 1 ON OFF Reversing Double Pole Double Throw GO ON OFF ON GX ON NONE ON ( ) Indicates momentary function.
6 6 Tippette Mounting Bracket Styles Dimensional Specifications: in. [mm] # 6-32NC-2 TP.156[3.96] DI 1.190[30.22].680[17.27].070[1.77].830[21.08].158[4.01] DI 1.450[36.83] 55 4 plcs* TPPED HOLE Standard with & B Brackets CLERNCE HOLE Standard with C Bracket MOUNTING HOLE (Nylon Snap-in Brackets) Panel Thickness:.030 min max. * ngled corners are suggested for optimum fit. Standard rectangular cutout is acceptable. TIL TII TIH 1.940[49.27] 1.940[49.27] 1.892[48.06] 1.960[49.78].078[1.98].078[1.98].078[1.98].078[1.98] TIL TII TIH 2.093[53.16] 2.090[53.08].156[3.96].156[3.96] B TIL B TII, 1.875[47.62] 1.940[49.27] 2.062[52.37].437[11.09] CX TIL.426[10.82] C.426[10.82] C TIH, TII 1.950[49.53] 1.350[34.29] GCP GMP GLOSS FINISH MTTE FINISH HOLE PLUG FOR TIL,, TIH & TII H 1.570[39.88].430[10.92] NRROW 1.570[39.87] WIDE 1.750[44.45] MRINE / STD / WTERSHEDDING.900[22.86] 1.126[28.60] FN TIL,, TIH, TII METL, SNP-IN FW TIL,, TIH, TII METL, SNP-IN MBL, NBL, WBL BLCK NYLON, SNP-IN REV_SW_Tippette_0712
Tippette Switches. Tippette Switches. Agency Certifications. Mounting. Carling Technologies
Tippette Switches Electrical Contact Rating........ 15 amps, 125 VC 10 amps, 250 VC 3/4 HP 125250 VC 15 amps, 1230 VDC Life................ 25,000 cycles circuit dependent 50,000 cycles circuit dependent
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
L-Series Sealed Rocker Switches
L-Series Sealed Rocker Switches L-Series Sealed Rocker Switches Making the right connections has never been easier with the L-Series Rocker Switch from Carling Technologies. Not only does this innovative
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
Fig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
LIGHT TOGGLS Fig. -00-0 -0-0 - - - - - - - - -0 - - - Fig. Figure -00-U -0-U -0-U -0-U --U --U --U --U --U --U --U --U -0-U --U --U --U Poles/ MPS Throws VC Fig. Fig. Style L uckbill L uckbill L uckbill
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
Fig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
LIGHTED TOGGLES Fig. -00-0 -0-0 - - - - - - - - -0 - - - Fig. Figure -00-BU -0-BU -0-BU -0-BU --BU --BU --BU --BU --BU --BU --BU --BU -0-BU --BU --BU --BU Poles/ AMPS Throws VDC Fig. Fig. Style LED Duckbill
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
T80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
C&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
T80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
C&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
AC INLETS & OUTLETS IEC 320 & MINI IEC CONNECTORS IEC SERIES
C INLETS & OUTLETS IEC 30 & MINI IEC CONNECTORS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
onlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
Catalog Issued 3-03 (PDF Rev )
W6/W9 series Magnetic Hydraulic P& Circuit reakers Features Designed for the international market. UL Recognized (UL77 and UL5), CS ccepted and VDE approved. Ratings to 5 amps. Heavy duty #-32 stud connections.
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
Connectors. Section Contents
Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks........ 304-305 N512-BK 12-Pole block......................... 306 NFT2-WH 2-Pole block......................... 306
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
W-Series SEALED ROCKER SWITCHES
W-Series SEALED ROCKER SWITCHES Carling Technologies set the standard for performance and aesthetics with the widely successful, often imitated, but never duplicated, V-Series rocker switches. Building
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
W-Series. Switch. Fully sealed and submersible IP68 protection including below the panel Tri-seal design Connector with twin locking tabs
WSeries Switch Carling Technologies set the standard for performance and aesthetics with the widely successful, often imitated but never duplicated, VSeries rocker switches. Building further upon that
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
Push buttons at a glance
104P Push Buttons Push buttons at a glance Contents The inside story....................... 1 Hot buttons........................... 2 Non-illuminated push buttons........... 3 Illuminated push buttons...............
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
Adam Technologies, Inc.
iec 320 & mini iec CoNNeCTorS INTRODUCTION: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE and other applicable
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
Fuseholders PAGE. Fuseholders.
PAGE International Shock-Safe (Panel Mount).......................................................................... 467-468 Flip-Top Shock-Safe (Panel Mount)..................................................................................
SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
Wire connection products
Wire connection products Section Contents Page Rail mount terminal blocks NDN Series 35mm DIN rail mount blocks...282-283 N512-BK 12-Pole block... 284 NFT2-WH 2-Pole block... 284 NFT3-3-pole block... 284
Motor Starting Switch Features
Motor Starting Switch Features 10 YER LIMITED UL 508 Listed CUL per CS ification C22.2 No. 14 Certified Large toggle is easy to turn ON/ with gloved hand Topped roll-over rivets secure yoke to device Robust,
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
General Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
SWITChES NSiMASTER.indd /4/09 10:58:08 AM
SWIThS switches switchs roker, & Misellaneous swithes T. UP O IRUT UN. POLS & MPS 12 V MPS 20 V RTINGS 12-20 V VOLTG LMP OLOR TR. ONTT ONN. TYP 77010RQ 77010 on off PST 20 10 1 1 /2 @12,2 @ 20 non-lighted
MS-Series. Circuit Breaker
MS-Series Circuit Breaker Carling Technologies MS-Series Sealed Toggle Circuit Breaker was designed and tested to operate flawlessly in the harshest of environments. Ideally suited for COTS (commercial
General Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical
Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
D. S. HULL COMPANY, INC
M484-BP M493-BP M584-BP 5582-BP 55020-BP 55088 Toggle Switches Cole Hersee Standard Toggle Switches Non-corrosive construction throughout. Durable, moisture repellent plastic housing. Silver contacts.
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
Switches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
General + Definite Purpose Contactors
General + Definite Purpose General Information... 2 Horse Power Rating Charts... 4 Contact Life... 8 Contactor Number Structure... Series C8 Miniature and Starters... 3 ccessories... 2 Contactor Cross
F-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
PD-Series Ground Fault Circuit Protection
PD-Series Ground Fault Circuit Protection SmartGuard is an equipment ground fault protection device that functions as a standard high-quality Carling hydraulic/ magnetic circuit breaker, offering customized
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
F-Series. Circuit Breaker
F-Series Circuit Breaker The F-Series hydraulic/magnetic high amperage circuit breakers are designed to handle high current applications in extremely hot and/or cold locations. Due to its timeproven hydraulic/magnetic
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
TYPICAL INDICATOR ORDERING EXAMPLE. Lamps. Incandescent Lamp Used with Solid Cap 05 5-volt volt. Incandescent or Neon Lamp Used with Insert Cap
KB K Shapes Bushing ounting 01 02 03 Snap-in ounting 04 05 06 W01 Housing Black only Terminals Silver Solder Lug* * Wire harness & cable assemblies offered only in Americas TYPICAL INDICATOR ORDERING EXAPLE
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
Indicator body single with two independent lamp bases, raised, rectangular, black plastic, screw terminals, without bezel. Part No
Series 03. mm x 4. mm IP40/IP65 0 A 400 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales
Fuse Blocks and Clips
PGE Fuse and lock s OMNI-LOK Fuse lock...................................................................................... 484-486 Midget Fuse....................................................................................................
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications