Indicators. Introduction
|
|
- Morris Stone
- 6 years ago
- Views:
Transcription
1 Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design including IP and IP7 environmentally sealed versions for use where a front panel seal is needed. The vandal resistant ED indicators are designed to complement the vandal resistant switches (see the Switch Section), they have similar profiles with stainless steel bodies, sealing to IP & 8 and are built to withstand harsh environments. Vandal esistant ED ED ezel Indicator ights ow Voltage ampholders ED ampholders Indicator ights IP Indicators 31
2 Indicators Vandal esistant ED Indicators Proud of Panel Profile lush Panel Profile DX0505 DX050 Solder Tag/mm Tag Termination Sealed to IP7,, Yellow or lue ED Options Wide Viewing ngle Shock and Vibration esistant Stainless Steel body Solder Tag/mm Tag Termination Sealed to IP7,, Yellow or lue ED Options Wide Viewing ngle Shock and Vibration esistant Stainless Steel body Specifications DX0505/ol/Voltage DX050/ol/Voltage Terminations: orward Voltage: ont. orward urrent: (max) Power Dissipation: everse urrent: = 5V) ED uminous Intensity: Operating Temp. ange: Storage Temperature: Sealing (ront of panel): aterials ody: ens: O ing (external): (internal): Tightening Torque Thread Size: ED olours: ED Voltage: os Solder Tab/mm Tab 1.85V, 2.2V, Yellow 2.0V, lue 3.8V 30m, 25m, Yellow 30m, lue 25m 100mW, 105mW, Yellow 125mW, lue 120mW 10μ max., 10μ max., Yellow 10μ max., lue 50μ max. 2000mcd, 100mcd, Yellow 400mcd, lue 100mcd (typ) 40º to +80º 40º to +85º Protection lassification IP7 to E0529:1992+2:2013 Stainless Steel Polycarbonate U94V-0 itrile Silicone 0.5m - 0.9m (4.4lbf.in lbf.in.) 12 x 1.25-g /D (), / (), /Y (Yellow) / (lue), with colour coded insulator /12 (12V d.c.), /24 (24V d.c.) or /00 (no ballast resistor) ompliant Solder Tab/mm Tab 1.85V, 2.2V, Yellow 2.0V, lue 3.8V 30m, 25m, Yellow 30m, lue 25m 100mW, 105mW, Yellow 125mW, lue 120mW 10μ max., 10μ max., Yellow 10μ max., lue 50μ max. 2000mcd, 100mcd, Yellow 400mcd, lue 100mcd (typ) 40º to +80º 40º to +85º Protection lassification IP7 to E0529:1992+2:2013 Stainless Steel Polycarbonate U94V-0 itrile Silicone 0.5m - 0.9m (4.4lbf.in lbf.in.) 12 x 1.25-g /D (), / (), /Y (Yellow) / (lue), with colour coded insulator /12 (12V d.c.), /24 (24V d.c.) or /00 (no ballast resistor) ompliant 317 Indicators
3 Indicators Vandal esistant ED Indicators Proud of Panel Profile lush Panel Profile DX0507 DX0508 lying ead Termination Sealed to IP7,, Yellow or lue ED Options Wide Viewing ngle Shock and Vibration esistant Stainless Steel body lying ead Termination Sealed to IP7,, Yellow or lue ED Options Wide Viewing ngle Shock and Vibration esistant Stainless Steel body Specifications DX0507/ol/Voltage DX0508/ol/Voltage Terminations: orward Voltage: ont. orward urrent: (max) Power Dissipation: everse urrent: = 5V) ED uminous Intensity: Operating Temp. ange: Storage Temperature: Sealing (ront of panel): aterials ody: ens: O ing (external): (internal): Tightening Torque Thread Size: ED olours: ED Voltage: os lying eads 1.85V, 2.2V, Yellow 2.0V, lue 3.8V 30m, 25m, Yellow 30m, lue 25m 100mW, 105mW, Yellow 125mW, lue 120mW 10μ max., 10μ max., Yellow 10μ max., lue 50μ max. 2000mcd, 100mcd, Yellow 400mcd, lue 100mcd (typ) 40º to +80º 40º to +85º Protection lassification IP7 to E0529:1992+2:2013 Stainless Steel Polycarbonate U94V-0 itrile Silicone 0.5m - 0.9m (4.4lbf.in lbf.in.) 12 x 1.25-g /D (), / (), /Y (Yellow) / (lue), with colour coded insulator /12 (12V d.c.), /24 (24V d.c.) or /00 (no ballast resistor) ompliant lying eads 1.85V, 2.2V, Yellow 2.0V, lue 3.8V 30m, 25m, Yellow 30m, lue 25m 100mW, 105mW, Yellow 125mW, lue 120mW 10μ max., 10μ max., Yellow 10μ max., lue 50μ max. 2000mcd, 100mcd, Yellow 400mcd, lue 100mcd (typ) 40º to +80º 40º to +85º Protection lassification IP7 to E0529:1992+2:2013 Stainless Steel Polycarbonate U94V-0 itrile Silicone 0.5m - 0.9m (4.4lbf.in lbf.in.) 12 x 1.25-g /D (), / (), /Y (Yellow) / (lue), with colour coded insulator /12 (12V d.c.), /24 (24V d.c.) or /00 (no ballast resistor) ompliant Indicators 318
4 Indicators 5mm ED Indicators hrome Plated rass ezel hrome Plated rass ezel Prominent or ecessed Style hoice of ED Types and olours DX0998 DX0999 ylon ezel lass illed ylon ezel Prominent or ecessed Style hoice of ED Types and olours DX1120 DX1121 Specifications ezel aterial: Style: Operating Temp. ange: Storage Temperature: ED olours: ED Options: Thread Size: os DX0998, DX0999/olour/Options rass, hrome Plated ecessed (DX0998) Prominent (DX0999) Dependent on ED used Dependent on ED used /D (), / (), /Y (Yellow), / (lue), /T (Tri olour), /D1 (Dual olour - /), /D2 (Dual olour - /mber), /D3 (Dual olour - /mber) /02 (lashing, or only) x 32TPI ompliant DX1120, DX1121/olour/Options lass illed ylon ecessed (DX1120) Prominent (DX1121) Dependent on ED used Dependent on ED used /D (), / (), /Y (Yellow), / (lue), /T (Tri olour), /D1 (Dual olour - /), /D2 (Dual olour - /mber), /D3 (Dual olour - /mber) /02 (lashing, or only) x 32TPI ompliant See Page 212 for ED options and specifications* 319 Indicators
5 Indicators 5mm ED Indicators luminium ezel - IP Sealed luminium ezel, lack nodised inish IP ront Panel Sealed Prominent or ecessed Style hoice of ED Types and olours DX1090 DX1092 luminium ezel - IP Sealed luminium ezel, lear nodised inish IP ront Panel Sealed Prominent or ecessed Style hoice of ED Types and olours DX1091 DX1093 Specifications aterials: Style: Operating Temp. ange: Storage Temperature: Sealing (ront of panel): Tightening Torque: ead Solder Time: ED olours: Thread Size: os DX1090, DX1092/olour/Options luminium - lack ecessed (DX1090) Prominent (DX1092) Dependent on ED used Dependent on ED used Protection lassification IP to E0529:1992+2: m (8ozf.in.) min 20º for 5 seconds max. /D (), / (), /Y (Yellow), / (lue), /T (Tri olour), /D1 (Dual olour - /), /D2 (Dual olour - /mber), /D3 (Dual olour - /mber) x 32TPI ompliant DX1091, DX1093/olour/Options luminium - lear ecessed (DX1091) Prominent (DX1093) Dependent on ED used Dependent on ED used Protection lassification IP to E0529:1992+2: m (8ozf.in.) min 20º for 5 seconds max. /D (), / (), /Y (Yellow), / (lue), /T (Tri olour), /D1 (Dual olour - /), /D2 (Dual olour - /mber), /D3 (Dual olour - /mber) x 32TPI ompliant See Page 212 for ED options and specifications Indicators 320
6 Indicators 4mm ED Indicators hrome Plated rass ezel hrome Plated rass ezel Prominent or ecessed Style hoice of ED Types and olours DX111 DX1118 lack ickel Pated rass ezel luminium, lack nodised ezel Prominent or ecessed Style hoice of ED Types and olours DX1117 DX1119 Specifications ezel aterials: Style: Operating Temp. ange: Storage Temperature: ead Solder Time: ED olours: os DX111, DX1118/olour rass, hrome Plated ecessed (DX111) Prominent (DX1118) Dependent on ED used Dependent on ED used 20º for 5 seconds max. /D (), / (), /Y (Yellow), / (lue) ompliant DX1117, DX1119/olour luminium, lack nodised ecessed (DX1117) Prominent (DX1119) Dependent on ED used Dependent on ED used 20º for 5 seconds max. /D (), / (), /Y (Yellow), / (lue) ompliant See Page 213 for ED specifications* 321 Indicators
7 Indicators 5mm ED options 5mm EDs STDD Specification Yellow lue uminous orward voltage: ont. orward urrent (max): 25mcd 2.0V 30m 20mcd 2.0V 25m 20mcd 2.1V 30m 21mcd 3.5V 30m Power Dissipation: 105mW mbient 120mW everse urrent: everse Voltage: 10μ 10μ 10μ 50μ Operating Temp: 40 to to +80 Part o: /D / /Y / 5mm EDs SI Specification uminous orward voltage: ont. orward urrent (max): 1.2mcd V 10-30m 20mcd 2.0V 25m Power Dissipation: lash 3V supply: Operating Temp: 200mW 20 ambient 2.2z (typ) 0 to +70 Part o: /D/02 //02 5mm EDs TI OOU Specification uminous orward voltage: ont. orward urrent (max): Power Dissipation: everse urrent: everse Voltage: Operating Temp: Part o: //mber 2.5mcd 2.4V 30m (max) 150mW 20 mbient 100μ 40 to +70 /T 5mm EDs DU OOU Specifications / /mber /mber uminous Intensity: orward voltage: ont. orward urrent: Power Dissipation: everse urrent: everse Voltage: Operating Temp: Part o: 4.5/5mcd 2.2V 30m/30m 100mW/100mW 100m /D1 4.5/4mcd 2.2V 30m/20m 100mW/0mW 100m 40 to +85 /D2 4/5mcd 2.2V 30m/20m 100mW/0mW 100m /D3 Indicators 322
8 Indicators 4mm ED Options 4mm EDs Standard Specifications Yellow lue uminous orward voltage: ont. orward urrent (max): Power Dissipation 20 mbient: everse urrent: everse Voltage: Part o: 2.5mcd 2.0V 30m 100mW 10μ /D 2.5mcd 2.1V 30m 100mW 10μ / 2.5mcd 2.0V 20m 85mW 10μ /Y 50mcd 3.8V 30m 120mW 50μ / Part o reakdown DXxxxx XX XX ezel Type ED olour D = = Y = Yellow = lue D1 = Dual olour - 5mm (/ ) D2 = Dual olour - 5mm (/ mber) D3 = Dual olour - 5mm (/ mber) T = Tri olour - 5mm (/ /mber) ED Options lank = Standard 02 = lashing - 5mm ( or only) Example: DX1092/D/02 = lack luminum IP Prominent ezel, with flashing ED 323 Indicators
9 Indicator ights eon, ED and ilament amp ey eatures eon, ED, mains ED or filament lamp olours and voltages: EO D ED IS ED IET ezel sizes from.7 to 1mm diameter, amber, green, blue and clear lenses, yellow, green, blue and white EDs vailable with, mber, or lear lenses 100/130V (marked 110V), 200/250V (marked 230V), Yellow,, lue, White 2.0/2.2V esistors for other voltages available., Yellow,, lue, White V ac operation. vailable with, mber,, lear or lue lenses V, 12/14V, 24/28V. Wide choice of styles Terminal Type Sealed Illumination olour Voltage Options () 05 () max max eon & ilament mber 1 ED o esistor 2 125V eon 3 250V eon hrome ezel inish () max lue (Special Order) lear 4 Vdc ED 5 12Vdc ED () max 24Vdc ED W W () () max 10.0max ED Y Yellow lue 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED Indicators 324
10 Indicator ights eon, ED and ilament amp Terminal Type Sealed Illumination olour Voltage Options W () () max eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish ED 24Vdc ED 7 12/14V ilament ) 058 (*) Y Yellow 8 24/ 28V ilament 9 125/250Vac ED () 058 (*) lue Dimensions () 05 () () 0195 () 05 () ) 058 (*) () 05 () () () 058 (*) 325 Indicators
11 Indicator ights eon, ED and ilament amp ey eatures eon, ED, mains ED or filament lamp olours and voltages: EO D ED IS ED IET ezel sizes from.7 to 1mm diameter, amber, green, blue and clear lenses, yellow, green, blue and white EDs vailable with, mber, or lear lenses 100/130V (marked 110V), 200/250V (marked 230V), Yellow,, lue, White 2.0/2.2V esistors for other voltages available., Yellow,, lue, White V ac operation. vailable with, mber,, lear or lue lenses V, 12/14V, 24/28V. Wide choice of styles Terminal Type Illumination olour Voltage Options Panel pproval () 059 W () () eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish all sales max max () 027 () () ED Y Yellow lue 24Vdc ED 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED max Indicators 32
12 Indicator ights eon, ED and ilament amp Terminal Type Illumination olour Voltage Options Panel pproval () () () 0273 eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish 10.0 max max () () () ED Y Yellow lue 24Vdc ED 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED or12.7 ø12.0 = ø12.7 = Dimensions () 059 W () () 0273 () () () () () () () 027 () () Indicators
13 Indicator ights eon, ED and ilament amp ey eatures eon, ED, mains ED or filament lamp olours and voltages: EO D ED IS ED IET ezel sizes from.7 to 1mm diameter, amber, green and clear lenses, yellow, green, blue and white EDs vailable with, mber, or lear lenses 100/130V (marked 110V), 200/250V (marked 230V), Yellow,, lue, White 2.0/2.2V esistors for other voltages available., Yellow,, lue, White V ac operation. vailable with, mber,, lear or lue lenses V, 12/14V, 24/28V. Wide choice of styles Terminal Type Illumination olour Voltage Options Panel pproval () ) eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish P () () ED Y Yellow 24Vdc ED 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED max max () 0180 lue max Indicators 328
14 Indicator ights eon, ED and ilament amp Terminal Type Illumination olour Voltage Options Panel pproval () 0180 () () 1092 eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish max max ED 24Vdc ED Y Yellow 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED lue Dimensions () () () 1092 ) () () 0180 () () Indicators
15 Indicator ights eon, ED and ilament amp ey eatures eon, ED, mains ED or filament lamp olours and voltages: EO D ED IS ED IET ezel sizes from.7 to 1mm diameter, amber, green and clear lenses, yellow, green, blue and white EDs Wide choice of styles vailable with, mber, or lear lenses 100/130V (marked 110V), 200/250V (marked 230V), Yellow,, lue, White 2.0/2.2V esistors for other voltages available., Yellow,, lue, White V ac operation. vailable with, mber,, lear or lue lenses V, 12/14V, 24/28V. Terminal Type Illumination olour Voltage Options Panel pproval 0581 Y eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish 18.2/18.3 x.2/* P /9.50 x * ED 24Vdc ED Y Yellow 7 12/14V ilament 8 24/ 28V ilament 9 125/250Vac ED lue Dimensions 0581 Y eon tube, resistor and flexible lead assembly, protected by shrunk on transparent sleeving. Indicators 330
16 ow Voltage ampholders ey eatures Up to 50V, mber,, lue and lear inestra/philinea lamp holder olours and voltages: These lampholders are suitable for up to 50V max. ulbs will be supplied (dependent on order quantity) if a voltage is specified. olours -, mber,, (lear & lue, check availability). Terminal Type Sealed Illumination olour Voltage Options Panel T T T (ES) () (T) S Sealed eon D ED ains ED ains ED eon & ilament mber lue (Special Order) lear 1 ED o esistor 2 125V eon 3 250V eon 4 Vdc ED 5 12Vdc ED hrome ezel inish T max T max T85 T () ED 24Vdc ED 12.7 S (S) Y Yellow 7 12/14V ilament 8 9.max T85 24/ 28V ilament 9 125/250Vac ED T85 lue T (ES) () (T) () (S) Indicators
17 arge ow Voltage ampholders ey eatures pprovals and specifications Up to 50V ES or bulb lat and domed lens rass or nylon bodies ulbs will be supplied (dependant on order quantity) if a voltage is specified. These lampholders are suitable for up to 50V max. olours -, mber,, (lear & lue, check availability). rass bodies have polished chrome finish. 1090E - - -, mber,, lue and lear lenses Dimensions and Options P O P.V.. Insulating terminal cover. Terminal Type olour ulb Voltage Options Panel ens T x ES (E10) 1091 Y Yellow lue V 12 12V 24 24V ax of 50V hrome ezel inish 1090 (ES lamps) D E Panel ole Dia ody aterial rass rass ylon with chrome bezel rass ylon with chrome bezel rass Dim Dim lat V ES (E10) (9s) ( and S Terminals only) lear 1091 ( lamps) Solder Q Panel ole Dia ody aterial rass ylon ylon (hrome twin) rass Dim Dim o lens S Screw and lamp Indicators 332
18 ED amps and ED ampholders ED ampholders can be supplied with or without EDs ey eatures ED lampholders Supplied with or without EDs lack or hrome finish olours and voltages: olours:, Yellow, and lue EDs (igh Intensity is standard. Option of extra super bright). Voltages: EDs are available for direct connection to 2.0/2.2V or 12Vdc or other voltages contact sales. Terminal Type ody olour ED olour Voltage Panel utout pproval Dimensions W ED fitted ED not fitted (W) lack 1 ED o esistor max ED & Wires fitted _ lank Y 4 Vdc ED T (+/-0.3) W ED fitted ED not fitted ED & Wires fitted () lue 5 12Vdc ED 24Vdc ED max T105 W ED fitted (W) ED not fitted 7.0max T105 ED & Wires fitted W ED fitted () ED & Wires fitted T105 W ED fitted () ED & Wires fitted T105 W ED fitted () ED & Wires fitted T Indicators
19 ED amps and ED ampholders - Sealed to IP7 ey eatures IP7 front bezel sealing ED lampholders Supplied with or without EDs lack or hrome finish olours and voltages: olours:, Yellow and lue EDs. (igh Intensity is standard. Option of extra super bright). Voltages: EDs are available for direct connection to 2.0/2.2V or 12Vdc. or other voltages contact sales. Terminal Type ED olour Voltage Panel pproval Dimensions ED & Wires fitted () () max lue 24Vdc ED T105 W ED fitted (W) (W) max ED not fitted T105 ED & Wires fitted (W) (W) max T105 Properties Sealing O-ring sealing equivalent to IP7, of both the ED to bezel, and bezel to panel is available where shown. Polarity The nylon base mouldings are polarity marked. ampholders only Items prefixed are supplied without EDs. ED wires or PV covered wire leads 125mm min length wires, mm standard strip. lternative colours, length and strip available. ody aterial and inish hromed brass or lack oxide coated brass. Indicators 334
20 Indicator ights - Sealed to IP7 ey eatures IP7 Panel Sealing Supplied complete with gaskets/ O rings eon, ED, mains ED or filament lamp ezel sizes from 7. to 22.9mm diameter, amber, green, blue and clear lenses, yellow, green, blue and white EDs Wide choice of styles olours and voltages: EO D ED IS ED IET vailable with, mber, or lear lenses 100/130V (marked 110V), 200/250V (marked 230V), Yellow,, lue, White 2.0/2.2V esistors for other voltages available., Yellow,, lue, White V ac operation. vailable with, mber,, lear or lue lenses V, 12/14V, 24/28V. Terminal Type Sealed Illumination olour Voltage Option Panel utout pproval () 1041 OS S Sealed mber 1 ED o esistor 2 125V eon hrome ezel inish 5.3max () 0245 OS () 0275 OS lue (Special) lear 3 250V eon 4 Vdc ED 5 12Vdc ED max max () 0277 OS () 0177 OS ED Y Yellow 24Vdc ED 7 12/14V ilament 8 24/ 28V ilament max max () 1092 S lue W 9 125/250Vac ED max White () 1041 OS () 0275 OS () 0177 OS () 0245 OS () 0277 OS () 1092 S 335 Indicators
21 ow Voltage amp olders - Sealed to IP7 ey eatures IP7 Panel Sealing Supplied complete with gaskets/ O rings eon, ED, mains ED or filament lamp ezel sizes from 7. to 22.9mm diameter, amber, green, blue and clear lenses, yellow, green, blue and white EDs olours and voltages: These lampholders are suitable for up to 50V max. ulbs will be supplied (dependent on order quantity) if a voltage is specified. olours -, mber,, (lear & lue, check availability). Terminal Type Sealed olour ulb Voltage Options Panel pprovals Dimensions 1090 PS (ES) S Sealed mber V 12 12V hrome ezel inish max T QS () 24 24V max lue (Special) T T002 OS (idget flange) hrome bezel T003 OS (ES) hrome bezel lear max T T002 OS (ES & idget flange) T003 OS (ES) max 0445 O P.V.. Insulating terminal cover. or use with 1090 & 1091 Indicators 33
22 Technical Information - Indicators The majority of rcolectric indicator lights can be supplied with alternative light sources: eon, luorescent, ilament lamp or ED EO and UOESET PS olours vailable with, mber,, lue or lear lenses. aximum striking voltages Standard brightness types 5Vac 90Vdc. igh brightness types 85Vac 135Vdc. igh brightness types are usually fitted. IET PS olours vailable with, mber,, lear or lue lenses EDs - D olours, Yellow,, lue and White. ife Typically 25,000 hours ( fluorescent lamps 20,000 hours). (easured to a point when the light output of the lamp is half its original level.) The end of life for a neon lamp is not usually a sudden failure. Voltage asic voltage 2.0/2.2V. Some items are available with integral resistors for 12V use. or details of resistors required for higher voltages, please call sales. alse signals due to long wiring It is possible for neon or fluorescent tubes to glow when they should be off. Thefalse signal is caused by the capacitance effect of fairly long wiring to the indicator being adjacent to other live cables. This effect can be prevented in most cases by fitting a 100k resistor across the supply wires close to the indicator assembly. TEIS oulded bodies and bases ylon. etal bodies and bezels hrome plated brass (except #) enses polycarbonate Terminals (most types) rass (electro-tin plated) Terminals (exceptions) rass (flash silver* or nickel** plated) Threaded metal nuts rass (nickel plated on 0275/7) Other fixings all sales for details * 9, 001, 002, 0430, 0480, 1090, 1091, 030, 7030, 830, 8580 ** # 3130, 310, 311, 3221 have nickel plated terminals with steel screws and plated polyamide bezel trims urrent aximum continuous forward current 20m ife >100,000hrs EDs - olours, Yellow,, lue and White. Voltage ated up to 230V ac, suitable for use at 110V and 230V ac. urrent <3m ife >100,000hrs TEPETUE TI uthority with Terminals with Wire leads PV SIIOE European T125 T105 T125 U T5/75 T5/75 SYOS Terminals,, Wire leads 200mm long Standard Solid wires ED only Panel hole size Panel thickness Temperature rating Indicators 340
Indicators. Introduction
Introduction Indicators This range of panel mounting ED indicators consists of many different bezel styles, types of ED s and colours. The range has developed to meet the different needs of panel design
More informationIndicator Lights (Neon, LED and Filament Lamp)
Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available
More informationIndicator Lights Neon, LED and Filament Lamp
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White
More informationSwitches. Introduction
Introduction Switches Manufactured from Stainless Steel, ulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially
More informationSWITCHES. Other switch types include conventional, push-button and toggle switches.
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationSwitches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationSwitches. Introduction
Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationPower rocker switches
Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,
More informationRefrigerator Switches. 228 Switches. Door switches. Switch rating from 0.2A, 250V ac up to 5A, 250Vac. Splash resistant variants. Choice of actuators
Refrigerator Switches Long recognised as a leader in refrigerator door switches, ulgin s wide range of types and configurations will suit almost any need. With both double pole and single pole options,
More information3 CE-Conformity. General information. Signal lamps. 3-2 Signal lamps
Signal lamps General information Signal Lamps with integral lamps/s The soldered lamps/s without base cannot be replaced. Signal Lamps with lamp socket An integral lamp socket allows replacement of lamps/s
More informationStorage Temp. ( C) Red D. Current DC (ma) Voltage Vac/dc
features specifications Ø8.1mm mounting Product will operate over a wide voltage range Robust stainless steel housing, Sealed to IP67 Colour diffused lens Full internal potting to resist shock & vibration
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationQ19 series. Ø19 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q19-17-07 LED INDICATORS DISTINCTIVE FEATURES 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs Prominent and flush bezel styles (2.8 x 0.8) solder lug/faston terminals, pins
More informationPushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
More informationQ SERIES Ø19mm (.748") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification Q19_VOY1603R1US Features 19mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationTYPICAL INDICATOR ORDERING EXAMPLE W01. Lamps. Incandescent Lamp Used with Solid Cap 05 5-volt volt
K Shapes 01 02 03 LB Housing Black ray Terminals Silver Solder Lug/ Quick Connect Terminals 01 TYPICAL INDICATOR ORDERIN EXAPLE DESCRIPTION FOR TYPICAL ORDERIN EXAPLE Clear Cap with Red Diffuser Incandescent
More informationMiniature Stainless Steel Vandal Resistant
Miniature Vandal Resistant Prominent Button / Flush Profile Prominent and Flush Profile 2A, 36 dc (Front of Panel Only) Specification /3 /1 Operating Temp Range: 0.6Nm 0.6Nm PA Copper, Gold Plated PA Copper,
More informationSECTION 14 - HINGES WDS
SION 14 - INS INS 14-1 to 14-3, Surface Mounted inges... 14-12 to 14-14, 14-23 to 14-24 Spring Released inges... 14-18 to 14-20 ift Off inges... 14-3 to 14-8, 14-11 orque inges... 14-21 xposed orner inges...
More informationQ16 series. Ø16 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q16-17-07 LED INDICATORS DISTINCTIVE FEATURES Secret until lit polycarbonate decals or custom engraving 10 mm colored diffused epoxy lens or 10 mm water clear super bright LEDs (2.8 x 0.8) solder lug/faston
More informationCategory PC1: Category PC2: Category PC3: For full definitions see IEC : 1994 Clause 9 Fax:
Categories of Protection against lectric hock Category PC1: No integral protection against electric shock. If required, esigners/manufacturers must provide additional protection against electric shock
More informationHMI Components. Series. LED-Indicator. Machinery and Automation Panel building Laboratory and measuring equipment. Raised design
Edition 07 / 2016 HMI Components 17 Series Characteristics The Series 17 indicator range comprises 6 mm to 22.5 mm components which are especially suited for: Raised design The large variety of front designs
More informationNo. of Terminals. On-Off Screw 2 6 Amps 120 VAC, 3 Amps 240 VAC On-Off Wire Leads 2. Spade 1 21 Amps 14 VDC
Medium & ight-duty Toggle es Great for household appliances and equipment Bat toggle switch, 774007, is ideal for battery-powered equipment including trimmers and lawn mowers ire leads are #18 AG, 6 in.
More informationQ SERIES Ø16mm (.630") Panel Mount LED Indicators Distinctive features and specification
Distinctive features and specification VOYC1603R1US Features 16mm panel mounting LED indicator 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs Plated brass bezel finished in bright
More informationQ22 series. Ø22 mm panel mount LED indicators DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS MOUNTING
IND-Q22-17-07 DISTINCTIVE FEATURES 16.75 mm colored diffused epoxy lens or 16.75 mm super bright LEDs Secret until lit polycarbonate decals or custom engraving (2.8 x 0.8) solder lug/faston terminals,
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More informationRocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
More informationTABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24
1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More informationIndicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order
Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More information[ Bezel size ] [ From panel front ] [ Shape ] [ Contact rating ] [ Action ] Unibody
and Series Suitable for a wide variety of office and factory aplications. Features IE s original mechanism for snap-action switching. The E lamp contains a current-limiting resistor and a diode for protection
More informationRoHS ON - OFF. ON - OFF (momentary ON) ON - OFF. (momentary OFF) ON - ON ON - ON. (momentary 1 side) ON - OFF - ON µ. (momentary 1 side)
900 Metal Lever Switches 6A 50Vac Metal lever switches Ratings up to 0A, 77V ac Single and double pole hoice of circuits including position and momentary 6.mm and solder terminals Guard option 6(4)A 50Vac
More information0305 Combined Switch / Lampholder for Freezers 2A 250Vac 25 T 85
0305 ombined Switch / Lampholder for Freezers 50Vac 5 T 85 E and E4 lamps Switch rating up to, compliant uto switching Mercury free For approval status on versions. 0306 and 0308 call the factory. Switched
More information18mm bezel diameter 16mm panel hole S.P. Push to make Polished finish 2A, 48V d.c.
Stainless Steel Momentary FLUSH PROFILE MP0042/1 DOMED PROFILE MP0042/2 MP0042/3 Specification MP0042/1 MP0042/2 MP0042/3 Terminations: Screw Terminals Screw Terminals Screw Terminals Switching: S.P. Push
More information2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationLinear fittings EVT Weatherproof fluorescent fitting - Industrial applications
DTS LINER FITTINGS - EVT FLUORESENT FITTING - INDUSTRIL PPLITIONS 95 Features Double central locking for ingress protection ll components mounted on hinged and removable gear tray which gives easy access
More informationTable of Contents. Incandescent Miniature EMI Suppressed Watertight Size T-1 3/ Incandescent Miniature Size T-1 3/
Indicator Products Table of Contents DESCRIPTION PRESSLITE TYPE OPTOLITE CONTINUED PAGE NUMBER DESCRIPTION TYPE PAGE NUMBER Friction Cap Bases EMI Suppressed Alternate Action 5 Amp S.P.D.T Form 99-36980
More informationLUMIFA LED Light Strips Long-lasting & so bright you gotta wear shades!
LUMIFA LED Light Strips Long-lasting & so bright you gotta wear shades! LF1A Series shown As IDEC continues to move towards a green future, we are excited to announce the LUMIFA series of LED light strips,
More informationTYPICAL INDICATOR ORDERING EXAMPLE. Lamps. Incandescent Lamp Used with Solid Cap 05 5-volt volt. Incandescent or Neon Lamp Used with Insert Cap
KB K Shapes Bushing ounting 01 02 03 Snap-in ounting 04 05 06 W01 Housing Black only Terminals Silver Solder Lug* * Wire harness & cable assemblies offered only in Americas TYPICAL INDICATOR ORDERING EXAPLE
More informationA B C D E F G H J K L M N
icro- icro- W-R Right ngle Thru-ole rinted ircuit oard onnectors igh erformance These connectors feature gold-plated Twistin contacts for best performance. tails are.020 inch diameter. Specify nickel-plated
More informationFuseholders. Introduction
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
More informationø25 TWS Series Switches & Pilot Lights
ø25 TWS Series Switches & Pilot Lights General-purpose switches & pilot lights for various applications Heavy-duty type for high-level protection against harsh environment No terminal cover required (except
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
More informationFig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
LIGHTED TOGGLES Fig. -00-0 -0-0 - - - - - - - - -0 - - - Fig. Figure -00-BU -0-BU -0-BU -0-BU --BU --BU --BU --BU --BU --BU --BU --BU -0-BU --BU --BU --BU Poles/ AMPS Throws VDC Fig. Fig. Style LED Duckbill
More informationInstallation Instructions
Installation Instructions These instructions cover the following kits: 64-66 Mustang Sequential Turn Signal LED kit 67-68 Mustang Sequential Turn Signal LED kit Kit Contents 2 x LED Tail Light Panels 2
More informationValve Products. Viking Lite Series Valves. Operating information. Minimum operating pressure, PSIG (bar) Materials. Recommended air quality for valves
atalog 000-US arker neumatic Valve roducts Viking ite Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose /8, / or
More informationAPEM. K range. Power rocker switches and indicators. Unique rocker design
APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationBattery Holders BATTERY HOLDERS
Battery Holders Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin s battery holder range caters for battery sizes AAA(R03), AA(R6), C(R14), CR123,
More informationA series Switches & Pilot Lights
A series Switches & Pilot ights ø16 ø12 ø10 ø8 A Series Selection Guide Series A6 Series Switches and Pilot ights Mounting Hole Size ø16 Model A6 AB6 AS6 AS6 (key) Disc tumbler key Shape Wave key Unit
More informationBR80ARW - Stop / Tail / Indicator / Reverse 288. BR80ARR - Dual Stop / Tail / Indicator 288. BR80AR - Stop / Tail / Indicator 197
334 333 Led Lamps BR Series Polycarbonate Lens BR80ARW - Stop / Tail / Indicator / Reverse 288 ADR Approved. Built in reflex Reflector 107 Benefits: -High quality LED s (low power consumption) -Polycarbonate
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationViking Lite Series Valves Air Control Valves
atalog 0697 arker neumatic Viking ite Series Valves ir ontrol Valves The Viking ite valve range is robust, versatile and combines a large flow capacity with short change-over times, designer may choose
More informationJAY-EL MARK 10 P/N ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885
TOP MARK 10 JAY-EL MARK 10 ILLUMINATED PUSHBUTTON SWITCH MEETS REQUIREMENTS OF MIL-S-22885 Catalog No. 7010-5 11-03 MARK 10 DESIGN FEATURES ELECTRICAL THIS SWITCH IS DESIGNED TO MEET THE EXACTING REQUIREMENTS
More informationLinear fittings EVD Fluorescent fitting - zones 21 & 22
DTS LIER FITTIGS - EVD FLUORESET FITTIG - ZOES 21 & 22 83 EVD Fluorescent fitting - zones 21 & 22 Features Double central locking for ingress protection ll components mounted on hinged and removable gear
More informationFig. 3. Actuator Style LED Tip LED Tip. Fig. 5. Lamp. Actuator Color. Style. LED Oval Rocker Lighted Blue LED
LIGHT TOGGLS Fig. -00-0 -0-0 - - - - - - - - -0 - - - Fig. Figure -00-U -0-U -0-U -0-U --U --U --U --U --U --U --U --U -0-U --U --U --U Poles/ MPS Throws VC Fig. Fig. Style L uckbill L uckbill L uckbill
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More informationHMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationFUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
More informationFUSEHOLDERS. Type Fuse Size (mm) Page. Type Fuse Size (mm) Page
Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals from UL, VDE, CSA, SEMKO
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More informationCompact SE Overview. High-Performance Dimming. Ballast
allast Compact SE Overview CompactSE- 03.08.04 or designs requiring the energy savings and aesthetic appeal of dimmed T4 compact fluorescent or T5 twin-tube lamps, Compact SE dimming ballasts are your
More informationAPEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
More informationA02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
More informationEmergency lighting units EM powerled
EM power EM power PRO EZ-3, 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with I interface and automatic test function For self-contained emergency lighting
More informationIntroduction Fuseholders. Electroustic Ltd (0)
Introduction Fuseholders Bulgin s extensive range of fuseholders are designed to give the degree of protection demanded in today s sophisticated electronic equipment. Carrying world-wide safety approvals
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationEmergency lighting units EM powerled
EM power EM power SEFTEST 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver with self-test function For self-contained emergency lighting SEV for output voltage
More informationButt Contact Pushbutton Switches. Series 30 and 46 Snap-in Panel Mount
utt ontact Series 30 and 46 Snap-in Panel Mount TURS Sleek lack Matte ezel onvenient Snap-In ront Mount hoice of 6 utton olors SPST, SPT or PT ircuitry lternate ction, Positive eel and Overtravel Versions
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationIR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationEmergency lighting units EM powerled
EM power EM power BASIC 1 2 W Combined emergency lighting Driver 1 4 W Product description Emergency lighting Driver for manual testing For self-contained emergency lighting SEV for output voltage < 60
More informationBattery Holders. Introduction. 230 Battery Holders
Introduction Battery Holders Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin s battery holder range caters for battery sizes AAA(R0), AA(R6),
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
More informationAPEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
More informationINTRODUCTION. Products CONTENTS. Circular Threaded Coupling Connectors. Reverse Bayonet Coupling Connectors
OUO etronics ndia, established as manufacturers of connectors in, has grown into a leading producer and exporter of grade electrical connectors and related accessories. etronics ndia's continuing mission
More informationDistinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationLighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
More informationValve Products. B Series Valve
atalog 000- arker neumatic Valve, an exceptional performing industrial valve in a compact size with an enhanced flow range. vailable in solenoid pilot operated and remote air pilot models. he series features
More informationPushbuttons B3. Options and ordering codes. Exploded view. BS 3. Green
Pushbuttons 3 IP65 protection Opaque or illuminated Metal or lack bezels Snap-on contact blocks Colour coded contacts Pushbutton stations International approvals including UL and CS Options and ordering
More informationTYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
More informationBattery Holders BATTERY HOLDERS
Battery Holders Manufactured from quality moulding and metal components to ensure a secure and reliable connection, Bulgin s battery holder range caters for battery sizes 1/2AA, AAA(R03), AA(R6), C(R14),
More information4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
More informationDURATAPE TM PC IP20 INDOOR
e Static Indoor Key eatures Energy efficient narrow spaced LE flexible linear light strip for continuous consistant color in linear applications. Ideal for IP20 interior applications such as cove, under-counter/
More informationA Series. Miniature Control Units
TEIH-ATM Electronic Auf der Bült 10-12 D 41189 Mönchengladbach Tel. 02166 958545 Fax 02166 958547 email: atm@treichl.de internet: A Series Miniature ontrol Units A Series Miniature ontrol Units Series
More informationDURATAPE TM ES IP20 INDOOR & IP65 DAMP
PROJET MOEL(S) TYPE URTPE TM ES IP0 INOOR & IP65 MP Narrow spacing ES Tapelight Energy Efficient LE flexible linear light strip for continuous consistent color in linear applications. Extremely flexible
More informationA01 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.630" (16mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + Switchblock To order, select desired model numbers from tables below. Example:
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationSnap-action Microswitches Subminiature V4N
Snap-action Microswitches Subminiature V4N V4N Characteristics Peg mounting option Solder terminals 2.8 mm faston (quick connect) terminals PC terminals Sealed (IP 67) / unsealed (IP 40) Pre-wired option
More informationDURATAPE TM PC INDOOR
PROJET MOEL(S) TYPE URTPE TM P INOOR Narrow spacing P Tapelight Energy Efficient LE flexible linear light strip for continuous pure color in linear applications. Extremely flexible and adjustable lengths
More informationDURATAPE TM ES IP20 INDOOR
e Static Indoor Key eatures Energy efficient narrow spaced LE flexible linear light strip for continuous consistant color in linear applications. Ideal for IP20 interior applications such as cove, under-counter/
More informationPNEUMATIC RACK AND PINION ACTUATORS. Advanced torque to size ratio
PNUMTI RK N PINION TUTORS dvanced torque to size ratio eatures: Pneumatic Rack and Pinion ctuators 90 ctuation for -way valves (Straight & ngle) 180 ctuation for -way (T-type) valves ctuators comply with
More information