Indicator Lights Neon, LED and Filament Lamp

Transcription

1 Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file / R Approvals shown for neon versions only ERM YPE PANE & C IUMINAION B 2.8 (C) 0566 A max Ø7.0 B 2.8 (C) 0566 B max Ø7.0 B 2.8 (C) 0566 C max Ø7.0 (C) 0145 AA max Ø6.7 W () 1041 OO max Ø7.6 () 1045 OO available 6.3 W max Ø7.6 70

2 ERM YPE PANE & C IUMINAION () 0245 OO available 7.1 W 6.3max Ø OO available Ø Ø7.5 () 0195 BB Ø Ø OO Ø Ø7.5 4 (H) 0568 A(*) Deep lens profile 1 (VDE at 100) Ø 27.5 *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix (W) - For Wires (H) 0568 B(*) Shallow lens profile 1 (VDE at 100) Ø *Final suffix (X) - ong barrier *Final suffix (Y) - Short barrier *Final suffix (W) - For Wires 71

3 Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file / R Approvals shown for neon versions only ERM YPE PANE & C IUMINAION () 0569 AW Call sales max Ø (C) 0273 OO max Ø (C) 0278 OO max Sq (C) 0276 AA Ø (C) 0275 OO max Ø13.3 (C) 0275 OO 11.5 max Ø Ø

4 ERM YPE PANE & C IUMINAION (C) 0276 OO (C) 0276 OO 2.8 max Ø (C) 0277 OO 14.9 (C) 0277 OO 12.0 max Ø14.6 (C) For sub-panel mounting, behind a facia Ø (C) 2820 OO 12.0 (C) 2821 OO or Ø13.6 ø12.0 = ø = Ø14.5 (C) 0586 OO Sq 73

5 Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file / Approvals shown for neon versions only ERM YPE PANE & C IUMINAION (C) 2870 OO Ø13.6 (C) 0589 OO Ø OO 9.5 Ø Ø18.3 (C) 0177 OO max Ø14.6 (C) 0067 OO max Ø16.0 (C) 0180AA 19.0max Ø15.0 Starlock fixing

6 ERM YPE PANE & C IUMINAION (C) 0180BB Ø16.3 (C) 0579 OO max Ø15.9 (C) max Ø22.9 max 75

7 Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp Neon, ED, mains ED or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber, green and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles U file E63363 CSA file / Approvals shown for neon versions only ERM YPE PANE & C IUMINAION H 0581 AY 18.2/18.3 x 6.2/6.3* (C) 0196 AA 13.0x OO 9.27/9.50 x 4.75* OO M Ø6.4 Red & Amber Neon tube, resistor and flexible lead assembly, protected by shrunk on transparent sleeving. 76

8 Indicator ights o match 8500, 8600, R13, 1500, 1550, 5500, 6000, 8300 and 7000 switches Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) Filament lamp Available with Red, Amber or Green lenses 6V, 12/14V, 24/28V Mains ED 6030 only Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon or filament lamp. Indicator lights Neon or filament lamp Bezel sizes from 6.7 to 16.3mm diameter Red, amber green and clear neons Red, amber and green filament lamps Styles to match rocker and push switches U file E63363 CSA file R29381 Approvals shown for neon versions only ERM YPE H8580 AB Full product details on pages Cut-out Flange Body Panel Cut-out Code thickness X Y B / / / / / /13.0 Y X X H8630 FB Full product details on pages Cut-out Flange Body Panel Cut-out Code thickness X Y B / / / / / /13.0 Y X R9 92B Full product details on pages 34 Cut-out Flange Snap fixing in panels thickness up to Approvals details - contact sales Ø Ø23.0 U U C0430 A C0480 A C6030 A body & C terminals only Full product details on pages & Body Cut-out Flange Code Y X Y X A 12.2/ / B 11.0/ / / / R 14.0/ / / / Full product details on pages Body Cut-out Flange Code Y X Y X A 22.3/ / B 22.1/ 30.0/ / 30.0/ R 23.0/ / / / Cut-out Y Cut-out Y X X Flange Y Flange Y X X C7030 AH Full product details on pages Cut-out Flange Body Cut-out Flange Code H Ø25.0/25.2 Ø2 25.0/25.2 Ø2 77

9 ow Voltage ampholders Colour and voltage: hese lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). Up to 50V Red, Amber, Green, Blue and Clear inestra/philinea lamp holder Refer to the 2 columns below (terminal and type), then state: ens colour and voltage. ERM YPE PANE & C 0061 AO (ES) Ø Rear of panel bulb replacement 6 C0067 OO (BA7s) 1.14max Rear of panel bulb replacement Ø AO (Midget flange) 9.6max 0063 AO (ES) Ø14.7 Front of panel bulb replacement 0062 MO (Midget flange) 9.6max S 0063 MO (ES) S0095 OO Ø14.7 Front of panel bulb replacement amp 4.7mm CS Hole Holders Paired Architectural lampholders for inestra or Philinea lamp. 78

10 ow Voltage ampholders Up to 50V MES or MBC bulb Flat and domed lens Brass or nylon bodies Red, Amber, Green, Blue and Clear lenses Bulbs will be supplied (dependant on order quantity) if a voltage is specified. hese lampholders are suitable for up to 50V max. Colours - Red, Amber, Green, (Clear & Blue, check availability). Brass bodies have polished chrome finish. For Neon & Mains versions see page 75 For Sealed version see page 84 C1090FP C 1090 F A ERMINA AMP CAP ENS BODY VOAGE, COOUR, EC ERMINA AMP CAP ENS HREADED BODY DIMENSIONS mm C 1090 MES (E10) F Flat 1090 (MES lamps) Panel Body Dim. Dim. Hole Dia. Material A B B A 19.0 Brass D 19.0 Brass A E 19.0 Nylon with chrome bezel x MBC (BA9s) V Domed G 19.0 Brass H 19.0 Nylon with chrome bezel Brass (MBC lamps) F0445 MO P.V.C. Insulating terminal cover. No lens Panel Body Dim. Dim. Hole Dia. Material A B B 19.0 Brass C 19.0 Nylon Q 19.0 Nylon (+ chrome trim) M 25.4 Brass Panel thickness 5.0, except A type body 79

11 ED amps and ED ampholders ED ampholders can be supplied with or without EDs Colours: Voltages: Red, Yellow, Green and Blue EDs (High Intensity is standard. Option of extra super bright). EDs are available for direct connection to 2.0/2.2V or 12Vdc For other voltages contact sales. ED lampholders Supplied with or without EDs Black or Chrome finish Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). ERM YPE PANE & C W ED A ED not (W) 1047 OO 6.3 ED & Wires 3mm ED 6.3max Ø7.6 W ED A ED not () 1048 OO ED & Wires 5mm ED 5.5max Ø9.5 W ED A ED not (W) 1050 OO ED & Wires 5mm ED with focusing reflector 7.0max Ø W ED () A ED & Wires W ED () A ED & Wires W ED () A ED & Wires

12 Neon & ED Indicator ights Sealed to IP52 and IP54 Colours and voltages: Neon Red, Amber, Green 120 or 230Vac 0.5W - please specify (Red base) ED Red, Amber, Green 28Vac/dc 1W (Green base) Neon versions feature integral current limiting & ghost lighting resistors. ED versions have rectifier diodes & resistors for direct connection to 28Vac/dc. o order Select a number from the type column, then state: ens colour, voltage and whether neon or ED. All versions have recessed screw terminals. IP52 is standard. A panel sealing washer is available for IP54. IP52 and IP54 sealing hree bezel sizes: 1, 20.5 and 30.0 diameter Neon or ED indicator Black and satin chrome bezel or without bezel Recessed screw terminals Approval shown for neon versions only ERM YPE PANE & C Recessed Screw 3130 No bezel 13.2 max Ø neon 50 ED Ø1 Recessed Screw 3160 Black bezel max Ø neon 50 ED Ø20.5 Recessed Screw 3161 Satin chrome style bezel max Ø neon 50 ED Ø20.5 Recessed Screw 3221 arge black bezel max Ø neon 50 ED Ø30.0 Select the version most suitable for your application from the 4 types shown. Or call sales for availability to your special requirements. 81

13 Indicator ights - Sealed to IP67 Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White 2.0/2.2V Resistors for other voltages available. ED - Red, Yellow, Green, Blue, White V ac operation. Filament lamp Available with Red, Amber, Green, Clear or Blue lenses 6V, 12/14V, 24/28V. Refer to the 2 columns below (terminal and type), then state: ens colour, voltage and whether neon, ED or filament lamp IP67 Panel Sealing Supplied complete with gaskets/ O rings Neon, ED, mains ED or filament lamp Bezel sizes from 7.6 to 22.9mm diameter Red, amber, green, blue and clear lenses Red, yellow, green, blue and white EDs Wide choice of styles SEMKO and U approvals applied for ERM YPE PANE IUMINAION () 1041 OS max Ø9.5 () 0245 OS max 4.5 Ø9.5 (C) 0275 OS max Ø (C) 0277 OS max Ø14.6 (C) 0177 OS 11.5 max Ø (C) 1092 FFS max Ø22.9 max 82

14 Colours: Voltages: ED amps and ED ampholders - Sealed to IP67 Red, Yellow Green and Blue EDs. (High Intensity is standard. Option of extra super bright). EDs are available for direct connection to 2.0/2.2V or 12Vdc. For other voltages contact sales. IP67 front bezel sealing ED lampholders Supplied with or without EDs Black or Chrome finish ED ampholders can be supplied with or without EDs Refer to the 2 columns below (terminal and type), then state: ED colour and voltage and body finish (Black or Chrome). ERM YPE PANE & C W ED (W) 1048 OA Designed to IP A ED not 5mm ED 5.5max Ø OA Designed to IP ED & Wires 5mm ED 5.5max Ø 9.5 W ED (W) 1050 OA Designed to IP A ED not 5mm ED with focusing reflector 7.0max Ø 1050 OA Designed to IP ED & Wires Properties 5mm ED with focusing reflector Sealing O-ring sealing equivalent to IP67, of both the ED to bezel, and bezel to panel is available where shown. 7.0max ED wires or PVC covered wire leads 125mm min length wires, 6.3mm standard strip. Alternative colours, length and strip available. 2.9 Ø Polarity he nylon base mouldings are polarity marked. Body Material and Finish Chromed brass or Black oxide coated brass. ampholders only Items prefixed A are supplied without EDs. 83

15 ow Voltage ampholders - Sealed to IP67 Colour and voltage: hese lampholders are suitable for up to 50V max. Bulbs will be supplied (dependent on order quantity) if a voltage is specified. Colours - Red, Amber, Green, (Clear & Blue, check availability). Refer to the 2 columns below (terminal and type), then state: ens colour and voltage. IP67 Panel seal Supplied complete with gaskets/ O rings Up to 50V Red, Amber, Green, Blue and Clear ES, Midget Flange, MES & MBC bulb ERM YPE PANE & C IUMINAION C1090 FPS (MES) max Front of panel bulb replacement max C1091 FQS (MBC) max Front of panel bulb replacement max 0062 AOS (Midget flange) 8.5 max 0063 AOS (ES) Ø MOS (ES & Midget flange) 8.5 max 0063 MOS (ES) Ø14.7 F0445 MO P.V.C. Insulating terminal cover. For use with C1090 & C