Provides a superior operational feel with high-speed tracking in motor drive mode.

Transcription

1 for Fader Control of s Motor-driven Master Type Motor N Fader, Motor K Fader RS N M/RS0K V Series Provides a superior operational feel with high-speed tracking in motor drive mode. Typical Specifications Items Motor N fader Specifications Motor K fader Total resistance tolerance Maximum operating voltage Operating force 0% 0V DC, 00V C Travel mm 0V DC, 500V C Travel mm 0.3 to.3n 0.5 to 0.65N Operating life 30,000cycles CP type : 300,000cycles Operating temperature range 0 to Rated voltage of motor 0V DC Maximum current of motor 00m or less at 0V DC Product Line Number of resistor elements Travel mm Type Lever type Length of lever mm Total resistance kω Resistance taper Terminal style Touch sense track Minimum packing unit pcs. Products No. Drawing No. Singleunit Motor N Fadar 9-T T-bar 0 Lead For PC board Lead With RSNM905 RSNM90 RS0NM906 3 For PC board RS0NM907 Motor K Fadar CP type Connector RS0KV900S 5 Note Products other than those listed in above products are also available. Please contact us for details. Refer to P. for product varieties. 3

2 for Fader Control of s Motor-driven Master Type Motor N Fader, Motor K Fader RS N M/RS0K V Series Dimensions Unit:mm No. Style M3 0 t= PC board mounting hole dimensions M3 0 t= M T 3 - holes holes T Terminal No. t= T Terminal No. 39

3 for Fader Control of s Motor-driven Master Type Motor N Fader, Motor K Fader RS N M/RS0K V Series Dimensions No. Style PC board mounting hole dimensions Unit:mm M3 0 t= T 3 - holes holes max. 5 (3.5) M3 Mounting surface T side 3T side Travel (.).5X3=7.5.5 (37) (39.5) (75) (.5) () (9.6) (3.7) 39 () 7 5 max.. -( ) Terminal No. 3 G 0

4 Motor-driven Master Type Potentiometer Product Varieties In addition to the recommended products, the following specifications can also be accommodated. Products Specifications Type Travel mm Model Terminal Single-unit Dual-unit Servo udio track Motor N fader Motor K fader CP type Motor N fader Motor K fader CP type RSNM RS0NM RS0KV RSNM RS0NM RS0KV vailable For PC board for auto dipping Lead Fader Terminal Connector Motor Terminal Lead Printed wiring for auto dipping Lead Fader Terminal Connector Motor Terminal Lead Lever Types Configuration code 9-T T-ar Unit:mm Dimensions.5 t=. Total Resistance Variety Total resistance k 0F F Motor K fader: Only 0k Resistance Taper Resistance taper Servo udio 5 0 Circuit Diagram Motor M or Servo track Wiper % 3 0% Moving direction of lever and contacts = % 3 0% = % 3 0% Lever T Notes. marked are specifications recommended by LPS.. Products other than those listed in the above list are also available. Please contact us for details. Refer to P., 3, 50 for resistance taper.

5 Motor-driven Master Type Potentiometer Motor N Fader Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample Part Number R S 6 0 N M T Travel (mm) 0 Number of resistor elements Single-unit Dual-unit T0 T Without With Resistance taper D Resistance taper 5 0 For dual-units specify the taper of the audio track. Servo track will always be taper. J G (%) Output volt.across term.- Input volt. across term () D(0) (5) Total resistance Term."" Rotation travel (%) J Term."3" Total resistance kω Note marked are specifications recommended by LPS.

6 Motor-driven Master Type Potentiometer Motor K Fader Orders Other Than Recommended Products When ordering product varieties that are not listed in the Product Line, please specify by referring to the below example. Sample part number R S 0 K V T 0 3 Number of resistor elements Single-unit Dual-unit Type CP type V T0 T Without With Resistance taper D Resistance taper 5 0 ppoint the taper of audio track in the case of dual-unit. Servo track is surely taper. J G (%) Output volt.across term.- Input volt. across term () D(0) (5) Total resistance Term."" Rotation travel (%) J Term."3" Total resistance kω 03 0 Note marked are specifications recommended by LPS. 3

7 Control of s List of Varieties Item Photo Master type Low-profile master type Motor-driven master type RS K RS N RS NS RS Y RS0K V RS N M Outlined specifications Electrical Performance Mechanical Performance Soldering Travel mm Number of resistor elements Total resistance k Resistance taper Operating force Stopper strength Lever pushpull strength Lever deviation mm oth Side Lever deviation Manual soldering Dip soldering RSK RS0K RS0K 0, 50,, 50 5, Standard 0. to 0.6N N RSN RS0N RSN RS0N RSNS RSSY RSNM RS0KV RS0NS RSDY RS0NM Single-unit Single-unit Dual-unit Single-unit Dual-unit Single-unit Dual-unit Single-unit CP type RS N 0, 50,, 50 RS NS 0, 50,, 50 RS Y 0, 0, 50 RS N 5,, 0 RS N S 5,, 0 RS Y 5,, 0 RS N Single-unit 0.05 to 0.N Dual-unit 0.05 to 0.9N RS Y 0. to.0n RS NS 0.05 to 0.N N L 5 0.5mm max. One side 350 max. 3s max. 50N RS N M 0, 50,, 50 RS0K V 0 Single-unit Dual-unit Servo udio 5,, 0 RS N M 0.3 to.3n RS0K V, Single-unit 0.5 to 0.65N max. 5s max. RS N Lead type, RS0K V not available Environmental Performance Cold Dry heat Damp heat 30 for 96h 70 for 0h 0, 90 to 95 RH for 96h Page Notes. ttenuation is specified for residual resistance.. "L" in the "Lever Wobble" column of the above table indicates the length of lever. 3. Products other than those listed in the above list are also available. Please contact us for details. 3

8 Mouser Electronics uthorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: LPS: RSNM905