Metal Strip Current Sensing Resistor MCS/MCSE/MCSL Series
|
|
- Earl McCoy
- 5 years ago
- Views:
Transcription
1 MCS/MCSE/MCSL Series Chip size: 00 to 51 NB, Tablet Pad, PC, Smart Phone Power Module for LED Lighting and Backlights Power Rating Resistance (mω) MCS00 1/8w M.5~50 mω -55~+10 ±50 MCS0603 1/W M.5~30 mω -55~+10 ±50 MCSE0805 1/W 1.0~100 mω -55~+10 ±50~±5 MCSE106 1W 1.0~00 mω -55~+10 ±50~±100 MCS51 1W,W mω -55~+10 ± mω -55~+10 ±100 MCSE30 5W 5.0~50 mω -55~+10 ±50 MCSL0508 1/W 5~30 mω -55~+10 ±5 MCSL061 1W 5~30 mω -55~+10 ±100 MCSL15 3W 5~10 mω -55~+10 ±50 MCSL03 6W 10~0 mω -55~+10 ±50 Tolerance F=+/-1% G=+/-% J=+/-5% s(mm) L W T A B MCS00 1.0± ± ± ± ±0.10 MCS ± ± ± ± ±0.15 MCSE ± ± ± ± ±0.0 MCSE106(S) 3.10± ± ± ± ±0.0 MCSE106(L) 1.10±0.0 MCS51(S) 0.80± ± ± ± ±0.0 MCS51(L) 1.00±0.0.0±0.5 MCSE ± ± ± ±0.30 MCSL ±0.0.0± ± ±0.0 MCSL ±0.0 3.± ± ±0.0 MCSL ± ± ± ±0.15 MCSL03 5.0± ± ± ±0.0 3 Damp with Load Voltage equal to 5 time rated power for 5 sec (JIS-C50-5.5) subjected to a relative humidity of 90-95% and a temperature of 90-95% percent and a temperature of 0 ± C for the period of 1000 hrs. (MIL-STD-0, Method 103) chamber 15 ±3 for 1000 hrs. (JIS-C50-.) Apply rated power for 1000 hours with 1.5 hours ON and 0.5 hour OFF. (JIS- C50-.10) direction of arrow unit band width reaches mm(+0./-0mm) illustrated in the figure below and hold for 10 ± 1 sec. (JIS-C50-6.1) specified in the solder bath 60 ±5 for 10 ±1 sec. (MIL-STD 0,Method 10) R X t specified in the solder bath 35 ±5 for ±0.5 sec. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) (JIS-C )
2 MCSH Series Chip size: 0603 to 51 Power Rating Resistance (mω) Tolerance 3 Damp with Load Voltage equal to 5 time rated power for 5 sec (JIS-C50-5.5) temperature of 0± for the period of 1000 hrs.. (MIL- STD-0, Method 103) 00 1/W /W.5~30-55~+10 ±50 F=±1% G=±% J=±5% chamber 15± for 1000 hrs. (JIS-C50-.) Apply rated power at 0± for 1000 hours with 1.5 hours ON and 0.5 hour OFF. (JIS-C50-.10) direction of arrow unit band width reaches mm(+0./- sec. (JIS-C50-6.1) specified in the solder bath 60±5 for 10±1 sec. (MIL-STD-0,Method 10) s(mm) L W t A ± ± ± ± ± ± ± ±0.0 specified in the solder bath 35 ±5 for ±0.5 sec. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) (JIS-C )
3 CCSH Series Chip size: 0603 to 51 s(mm) L W t A B ± ± ± ± ± ± ± ± ± ± S Type 0.50± ± ± ± L Type 0.80± ± S Type 0.60± L Type 6.5± ± ± ± ±0.5 Voltage equal to 3 time rated power for 5 sec (JIS-C50-5.5) Power Rating /8W /W 106 1/W 51 W Resistance (mω) 1% % 5% 0~99 Operation Temp. 100~99 ±00 6~10 11~100 ±00 101~96 ±00 6~10-55±155 11~100 ±00 101~96 ±00 10~ ±300 ~00 ±00 00~910 ±100 3 Damp with Load temperature of 0± for the period of 1000 hrs.. (MIL- STD-0, Method 103) chamber 15± for 1000 hrs. (JIS-C50-.) Apply rated power at 0± for 1000 hours with 1.5 hours ON and 0.5 hour OFF. (JIS-C50-.10) direction of arrow unit band width reaches mm(+0./- sec. (JIS-C50-6.1) specified in the solder bath 60±5 for 10±1 sec. (MIL-STD-0,Method 10) specified in the solder bath 35 ±5 for ±0.5 sec. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) (JIS-C )
4 100~99 Metal Strip Current Sensing Resistor CCS Series Chip size: 0603 to 51 s(mm) L W t A B ± ± ± ± ± ± ± ± ± ± S Type 0.50± ± ± ± L Type 0.80± ± S Type 0.60± L Type 6.5± ± ± ± ±0.5 Voltage equal to 3 time rated power for 5 sec (JIS-C50-5.5) Power Rating 00 1/16W /10W 106 1/W Resistance (mω) 1% % 5% 100~99 Operation Temp. ± ~96 ±00 100~99 ± ~96 ±00 50~99-55±155 ± ~99 ±00 3 Damp with Load temperature of 0± for the period of 1000 hrs.. (MIL- STD-0, Method 103) chamber 15± for 1000 hrs. (JIS-C50-.) 500~96 50~99 Apply rated power at 0± for 1000 hours with 1.5 hours ON and 0.5 hour OFF. (JIS-C50-.10) 51 1W 100~99 ± ~96 ±00 direction of arrow unit band width reaches mm(+0./- sec. (JIS-C50-6.1) specified in the solder bath 60±5 for 10±1 sec. (MIL-STD-0,Method 10) specified in the solder bath 35 ±5 for ±0.5 sec. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) (JIS-C )
5 MCSS Series Excellent long term stability 5W up to 19A at 0.3mΩ Chip size: 51, 390, 5910 & 80 Power modules Frequency converters Current sensor for power hybrid sources High current for automotive Loading below condition for 5 cycles. Peak current equal 5 x rated power. Power Rating Resistance (mω) MCSS51 1.5~3W 0.3~5.0-55~+10 ±50~±150 MCSS390 ~5W 0.~5.0-55~+10 ±50~±5 MCSS5930 6~10W 0.~1.0-55~+10 ±50~±100 3 Moisture Resistance temperature of 5 /65 10 cycles. (MIL-STD-0, Method 106) MCSS W ~+10 ±100 MCSS80 15W ~+10 ±100 chamber 15 for 1000 hrs. (JIS-C50-.) Apply rated power for 1000 hours with 1.5 hours ON and 0.5 hour OFF. (JIS-C50-.10) direction of arrow unit band width reaches mm(+0./- sec. (JIS-C50-6.1) Solder ability specified in the solder bath 35 ±5 for ±0.5 sec. It shall be immersed to a point 10mm from its root. (Sn96.5/Ag3.0/Cu0.5) (JIS-C ) s(mm) L W T A C (Max.) P MCSS ±0. 3.5±0. 0.± ± ±0. MCSS ±0. 5.0± ± ± ±0. MCSS ±0..5± ±0.15.0± ±0. MCSS ±0. 6.5± ±0..5± ±0. MCSS80 8.0±0. 0.0±0. 3.0±
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432)
WW25N ±1%, ±5%, 2W Ultra low ohm power chip resistors Size 2512 (6432) Metal Current Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25N_V14 Jul - 2015
More informationWW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors
WW12M, WW12N ±1%, ±5%, 1/2W, 1W Ultra low ohmic power chip resistors Size 1206 (3216) Sensing Type *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW12MN_V05 Jul.2010
More informationWA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array
WA04X, WA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) (Automotive ) Page 1 of 8 ASC_WAxxX_J_V05 May.2011 FEATURE 1. Small size and light weight 2. Reduced size
More informationData sheet FIXED THICK FILM CHIP RESISTORS; RECTANGULAR TYPE & ANTI-SULFURATION. AEC-Q200 qualified. RoHS COMPLIANCE ITEM Halogen and Antimony Free
No.: RMNW K HTS-1 /3 Date: 217. 4. 21 Data sheet : ANTI-SULFURATION RMNW1,16,2,32,35 AEC-Q2 qualified RoHS COMPLIANCE ITEM Halogen and Antimony Free Note: Stock conditions Temperature: +5 C +35 C Relative
More informationMA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array
MA04X, MA06X ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) Page 1 of 8 MA04/ 06_V03 Apr.2010 FEATURE 1. High reliability and stability
More informationWW12W ±1%, ±5% Size W. Thick Film High Power Low Ohm Chip Resistors. Approval sheet
±1%, ±5% Thick Film High Power Low Ohm Chip Resistors Size 1206 1W *Contents in this sheet are subject to change without prior notice. Page 1 of 6 ASC 1W TC200_V01 DEC - 2015 FEATURE 1. High power rating
More informationWR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1206, 0805, 0603, ( Automotive )
WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors Size 1206, 0805, 0603, 0402 ( Automotive ) Page 1 of 9 WR_J(AUTO)_ V03 Sep.2010 FEATURE 1. Automotive grade AEC Q-200 compliant 2. 100% CCD
More informationWR10, WR12, WR08, WR06, WR04 ±1%, ±5% General purpose chip resistors. Size 1210, 1206, 0805, 0603, 0402
WR10, WR12, WR08, WR06, WR04, General purpose chip resistors Size 1210, 1206, 0805, 0603, 0402 ( Automotive & Anti-sulfuration ) *Contents in this sheet are subject to change without prior notice. Page
More informationWW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive)
WW25X, WW18X, WW12X, WW08X, WW06X ±1%, ±5% Thick Film Current Sensing Chip Resistors Size 2512, 1218, 1206, 0805, 0603 (Automotive) *Contents in this sheet are subject to change without prior notice. Page
More informationThick Film Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface
More informationWW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors. Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free
WW25M 1%, 5% Metal Plate Low Ohm Power Chip Resistors Size 2512 (6432) 1W Current Sensing Type RoHS Exemption free and Halogen free *Contents in this sheet are subject to change without prior notice. Page
More informationSPECIFICATION SHEET. ±1%, ±5%, Convex Type General purpose chip resistors array
SPECIFICATION SHEET CNA24, CNA34 ±1%, ±5%, Convex Type General purpose chip resistors array Size 0402x4, 0603x4 (8p4R) ( Automotive & Anti-sulfur ) All data in this sheet are subject to change, modify
More informationSR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512
SR20X, SR25X ±1%, ±5% Power chip resistors Size 2010, 2512 ( Automotive & Anti-sulfuration ) Page 1 of 7 SR20-25X_V04 Sep.-2011 FEATURE 1. High reliability and stability ±1% 2. Sulfuration resistant 1000ppm
More informationHigh Power Low Ohm Chip Resistors. Size W, W, /2W
WW25P, WW20P, WW12P ±1%, ±5% 47mΩ~976mΩ High Power Low Ohm Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WW25P-20P-12P_V08
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors AEC Q-200 Qualified Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change
More informationSize 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration )
SR12, SR10, SR08, SR06, SR04, General purpose chip resistors Size 1206, 1210, 0805, 0603, 0402 (Anti-Sulfuration ) *Contents in this sheet are subject to change without prior notice. Page 1 of 9 ASC_SR_V03
More informationWW25W, WW20W, WW10W, WW12W, WW08W, WW06W
WW25W, WW20W, WW10W, WW12W, WW08W, WW06W ±1%, ±5% Thick Film Power Low Ohm Chip Resistors RoHS Exemption free and Lead free Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to
More informationThick Film General purpose chip resistors
WR02X(W) ±5%, ±1% Thick Film General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_V18 MAY - 2016 FEATURE 1. Small size and
More informationThin Film Anti-Sulfurated Chip Resistor (TAS Series)
(TAS Series) Features - Special materials, design, and processing for high sulfur applications - Tolerances as low as 0.05% and s as low as 10 ppm. - Test proven immunity to humidity, moisture, and sulfur
More informationAutomotive Grade Thin Film Chip Resistors
FEATURES PRECISE TOLERANCE AND TEMPERATURE COEFFICIENT EIA STANDARD CASE SIZES (0402 ~ 2512) AEC-Q200 QUALIFIED FOR AUTOMOTIVE APPLICATIONS LOW NOISE, THIN FILM (NiCr) CONSTRUCTION TEMPERATURE RANGE -55
More informationWR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18, WR20, WR25 ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18, WR20, WR25 Version 3 Oct.-2004 FEATURE 1. High power rating
More informationWW25X ±1%, ±5% Low ohmic power chip resistors Size 2512
WW25X ±1%, ±5% Low ohmic power chip resistors Size 2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WW25X Version 06 Jul.-2004 FEATURE 1. High power rating and compact size 2.
More informationPTC Thermistor for Automotive:TPM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code
More information1 7 ASC_WF06A_V01 NOV
WF06A 1 ~ 1Mohm ±5%, ±1% High Power Chip Resistors Size 0603 1/4W *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF06A_V01 NOV - 2015 FEATURE 1. Small size and light
More informationWR10X ±1%, ±5% General purpose chip resistors Size 1210
WR10X ±1%, ±5% General purpose chip resistors Size 1210 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR10X Version 02 Jun.-2005 FEATURE 1. High reliability and stability 2. Reduced
More informationWF06P 5% High power chip resistors Size 0603, 1/8watt
SPECIFICATION OF HIGH POWER CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF06P 5% High power chip resistors Size 0603, 1/8watt Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION
More informationWR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512
WR18X(W), WR20X(W), WR25X(W) ±1%, ±5% Power chip resistors Size 1218,2010,2512 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR18-20-25X(W) Ver.13 Oct.-2010 FEATURE 1. High power
More informationAutomotive and Anti-Sulfuration Chip Resistor 0603
The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface of the
More informationWA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WA04X Version 15 Sept.-2004 FEATURE 1. Small size and light
More informationThin Film Chip Resistor (ARG Series)
Construction D1 L (ARG Series) Features -Advanced thin film technology -SMD Type designed for automatic insertion -Wide resistance range 1ohm ~ 2.49Mega ohm Applications -Medical Equipment -Testing / Measurement
More informationHigh Power Chip Resistors Size W, W, /2W
WF25P, WF20P, WF12P ±1%, ±5% 0Ω,1Ω~1MΩ High Power Chip Resistors Size 2512 2W, 2010 1W, 1206 1/2W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25P, WF20P, WF12P, Ver.8 Jul.2010
More informationPTC Thermistor for Automotive:TPM-C Series
SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics
More informationB Unit: mm TYPE A B C D E F. How to Order KL 1410 M T R60. SEI Type Dimensions Tolerance Packaging Inductance
DIP Power Inductor KL Scope This specification applies to DIP Power Choke. High power Features Magnetic shielded construction for high density board assembly High performance excellent DC current characteristics
More informationWR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603
WR12X / WR08X / WR06X ±1%, ±5% General purpose chip resistors Size 1206 / 0805 / 0603 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR12X / WR08X / WR06X Version 17 Jul.-2004 FEATURE
More informationMetal Oxide Varistor Thermally Protected Type. TPV Series FEATURE PART NUMBERING SYSTEM LEAD CONFIGURATION SURGE CURRENT STANDARD WAVEFORM
FEATURE Operating Temperature: -55 C ~ +85 C Varistor : 200V ~ 1200V Two or Three terminal thermally protected Metal Oxide Varistor. High peak Surge current rating up to 10KA Standard lead form and spacing
More informationSMD High Power Precision Resistors
Key Features High precision - TCR 5ppm/ C and 10ppm/ C Tolerance down to 0.01% Thin film (nichrome) Choice of packages Stable high frequency performance Temperature range -55 C to +155 C Applications Communications
More informationDATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512
DATA SHEET CURRENT SENSOR - LOW TCR PT series 5%, 2%, 1% sizes 0402/0603/0805/1206/2010/2512 RoHS compliant & Halogen free Product specification December 30, 2015 V.1 Product specification 2 SCOPE This
More informationWF08P, WF06P. High Power Chip Resistors Size /4W ; /8W. Customer : Approval No : Issue Date : Customer Approval :
WF08P, WF06P ±1%, ±5% 0Ω, 1Ω~1MΩ High Power Chip Resistors Size 0805 1/4W ; 0603 1/8W Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF08P;WF06P Version 04 Jul.-2009 FEATURE 1. Small
More informationWF12SR360JTL. Size Surge 5% chip resistors. Customer : Approval No : Issue Date : Customer Approval :
SPECIFICATION OF SURGE 5% CHIP RESISTOR Ver: 1 Page: 1 of 7 ROHS compliance WF12SR360JTL Surge 5% chip resistors Size 1206 Customer : Approval No : Issue Date : Customer Approval : SPECIFICATION OF SURGE
More informationSPECIFICATION FOR APPROVAL
信昌電子陶瓷股份有限公司 Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Metal Strip Type Halogen Free Sensing
More informationSurface Mount Thick Film Resistor MCWR Series
Description The lead free resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a lead free resistive paste that is
More informationWR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201
WR02X(W) ±5%, ±1% RoHS compliant and Lead content 100ppm General purpose chip resistors Size 0201 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WR02X_TR_V02 Jul -
More informationMetal Alloy Low-Resistance Resistor Specifications
Page 1 of 14 Metal Alloy Low-Resistance Resistor Specifications March 2010 Specification Number:GCT-SPEC-011-11 Issued Date:2010/03/01 Page 2 of 14 1. Scope: 1.1 This specification is covered following
More informationWF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210
WF10H ±0.1%, ±0.5% High Precision chip resistors Size 1210 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WF10H_V01 Jan.2010 FEATURE 1. High reliability and stability
More informationSpecification. N1206 F Series. Approved by. Date of Establish : (Ref. No : 1206 F_Rev.2)
Specification Product Type SMD(Micro) Fuse N1206 F Series Approved by Date of Establish : 2012.11.01(Ref. No : 1206 F_Rev.2) 1. Scope This specification covers the detail requirements for SMD Micro fuse
More informationWirewound Chip Inductors
EATURES CERAMIC BODY, WIRE WOUND CHIP INDUCTOR SIZES K (0402) and J (0603) RoHS Compliant includes all homogeneous materials HIGH CURRENT AND LOW *See Part Number System for Details RELOW SOLDERING APPLICABLE
More informationReliability testing of solid and liquid type aluminum electrolytic capacitor after long storage
February 4, 2009 SUB: Component testing after Long Period on Shelf Reliability testing of solid and liquid type aluminum electrolytic capacitor after long storage The following pages show the reliability
More informationHigh Power Chip Resistor
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
More informationWK25S WK20S WK10S WK12S WK08S WK06S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805, 0603
WK25S WK20S WK10S WK12S WK08S WK06S ±5% 5%, ±10 10%, ±20 20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805, 0603 *Contents in this sheet are subject to change without prior notice.
More informationMetal Film Leaded Precision Resistor
Features Excellent overall stability Very tight tolerance down to ±0.05% Extremely low TCR down to ±5 PPM/ C High power rating up to 3 Watts Excellent ohmic contact Applications Automotive Telecommunication
More informationWK25S WK20S WK10S WK12S WK08S. Thick Film Power Surge Chip Resistors. Size 2512, 2010, 1210, 1206, 0805
WK25S WK20S WK10S WK12S WK08S ±5%, ±10%, ±20% Thick Film Power Surge Chip Resistors Size 2512, 2010, 1210, 1206, 0805 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WKxxS_V02
More informationWR02X ±5%, ±1% General purpose chip resistors Size 0201
WR02X ±5%, ±1% General purpose chip resistors Size 0201 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 8 WR02X Version 03 Jul.-2004 FEATURE 1. Small size and light weight 2. High reliability
More informationApproval sheet. WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors. *Contents in this sheet are subject to change without prior notice.
WLCM0603 WLCM1005 Multi-Layer Ceramic High Frequency Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 11 ASC_WLCM Series_V7.0 Jul. 2017 FEATURES 1. Ceramic structure
More informationWF25S WF20S WF12S ±5% 20% Power Surge Chip Resistors Size 2512, 2010, Customer : Approval No : Issue Date : Customer Approval :
WF25S WF20S WF12S ±5% 5%, ±10 10%, ±20 20% Power Surge Chip Resistors Size 2512, 2010, 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WF25S WF20S WF12S Ver.4 Sep.-2008 FEATURE
More informationSPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF DOCUMENT CHECKED 9/28/11 DS 12/01/2011 TFG 12/01/2011 GL
DIELECTRIC CERAMIC FILTER SPECIFICATION 1 OF 6 SPECIFICATION COMMERCIALLY AVAILABLE CERAMIC FILTER PART NUMBER: CF-32002005 ISSUED / REVISION ENGINEER APPROVED DOCUMENT CHECKED DRAFTSMAN DOCUMENT CHECKED
More informationWA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array
WA04, WA06 ±1%, ±5%, Convex Type & Concave Type General purpose chip resistors array Size 0402x2 (4p2R) Size 0402x4, 0603x4 (8p4R) Size 0602x8 (16p8R) *Contents in this sheet are subject to change without
More informationDATA SHEET TAPE AND REEL TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LG2040-PF/TRS-X REV. : DATE : 21 - Feb.
TAPE AND REEL TYPE LED LAMPS Pb Lead-Free Parts LG2040-PF/TRS-X DATA SHEET DOC. NO : REV. : QW0905- LG2040-PF/TRS-X A DATE : 21 - Feb. - 2006 PART NO. Package Dimensions LIGITEK ELECTRONICS CO.,LTD. LG2040-PF/TRS-X
More informationSPECIFICATION FOR APPROVAL
Prosperity Dielectrics Co., Ltd. No.220-1, Sec. 2, Nanshan Rd., Lujhu, Taoyuan 33860, Taiwan, R.O.C. Tel. 886-3-3224471 Fax 886-3-3212216 SPECIFICATION FOR APPROVAL DATE: CUSTOMER: PART NAME: Thick-Film
More informationNTC Thermistor for Automotive: TSM-C Series
Features 1. Qualification based on AEC-Q200 Rev-C 2. Operating temperature range: -50 ~ +150 3. Superior stability in high-temperature and high-humidity environment 4. RoHS & Halogen Free (HF) compliant
More informationWR04X ±1%, ±5% General purpose chip resistors Size 0402
WR04X ±1%, ±5% General purpose chip resistors Size 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WR04X Version 14 Jul.-2007 FEATURE 1. Small size and light weight 2. High reliability
More informationWire Wound Chip Inductor (Ferrite)
FEATURES Very strong solderability by reflow soldering, soldering iron or wave soldering Highly accurate dimensions Automated mounting capable Terminals are highly resistant to pull forces Highly resistant
More informationLIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only ROUND TYPE LED LAMPS. Lead-Free Parts LDUV2043Z/A DATA SHEET REV.
ROUND TYPE LED LAMPS Pb Lead-Free Parts LDUV2043Z/A DATA SHEET DOC. NO : QW0905-LDUV2043Z/A REV. : A DATE : 14- Mar. - 2017 發行 立碁電子 DCC Page 1/6 Package Dimensions 3.0 4.0 4.2 5.2 1.5MAX 25.0MIN 0.5 TYP
More informationWA04T ±5%, ±1% Concave Type General purpose chip resistors array
WA04T ±5%, ±1% Concave Type General purpose chip resistors array Size 0402x4 *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WA04T_Concave_V10 Oct.2010 FEATURE 1. Small
More informationCHIP FUSE; RECTANGULAR TYPE FCC10,16,20,32, FHC10,16,20,32. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FCC K HTS 0003 /13 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE FCC10,16,20,32, FHC10,16,20,32 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification
More informationMultilayer Ferrite Chip Inductor
Features -Closed magnetic circuit avoids crosstalk -Suitable for high density installation and re-flow soldering -Sizes 0603 / 0805 / 1206 Construction Applications -Personal Computers -Portable Equipment
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: HFC K HTS 0001 /3 Date: 2017. 1. 10 Specification Title: Style: CHIP FUSE; RECTANGULAR TYPE HFC32[Optional code:ag] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained
More informationFPS series. (AEC-Q200) Triple Rated Power / Anti-Surge Thick-film Lead Free Chip Resistors
1. Features.....2 2. Applications....... 2 3. Dimension and construction....2 4. Power Derating Curve.....3 5. Rating.3 6. Part Number.. 4 7. Marking / Soldering..4 8. Reliability Performance.6 9. Packing...9
More informationWA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4
WA04X ±5%, Convex Type General purpose chip resistors array Size 0402x4 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WA04X Version 20 Sep.-2008 FEATURE 1. Small size and light
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: SBF K HTS 0001 /4 Date: 2017. 1. 10 Specification Style: CHIP FUSE; RECTANGULAR TYPE SBF32[Optional code:as] RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE MEETS +85 C/85%RH TEST 000 HOURS MEETS CLIMATE CATEGORY (IEC 60068): 55/55/56 AVAILABLE IN ±
More informationMMP - Metal Film MELF
Specifications Per IEC 60115-1 D2 EN140401-803 B L D1 Features SMD enabled structure Excellent solderability termination Products meet RoHS requirements and do not contain substances of very high concern
More informationWire Wound Chip Inductor-WB Series
Wire Wound Chip Inductor-WB Series Construction 4 1 3 1 Ceramic Core 3 Electrode (Ag/Pd+Ni+Sn) 2 Magnet Wire 4 UV Glue 2 Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationWire Wound Chip Inductor
FEATURES Ceramic base provides high SRF Ultra-compact inductors provide high Q factors High current range available Miniature SMD chip inductor for fully automated assembly Outstanding endurance from Pull-up
More informationThick Film Low Ohm Chip Resistors
Description: The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top
More informationAnti-Surge Thick Film Chip Resistors
FEATURES EXCELLENT ANTI-SURGE & ANTI-SULFUR CHARACTERISTICS AEC-Q200 QUALIFIED RATED POWER UPGRADE IN SMALLER PACKAGE SIZE AVAILABLE IN ± TOLERANCE BOTH FLOW SOLDER AND REFLOW SOLDERING ARE APPLICABLE
More information1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Anti-Sulfur SMD Array Chip Resistor STA Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
More informationCHIP FUSE; RECTANGULAR TYPE. RoHS COMPLIANCE ITEM Halogen and Antimony Free
Spec. No.: FMC K HTS 0001 /7 Date: 2017. 1. 10 Specification Title: CHIP FUSE; RECTANGULAR TYPE Style: FMC10, 16 RoHS COMPLIANCE ITEM Halogen and Antimony Free Product specification contained in this specification
More information1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass)
Thick Film Chip Resistor CR Series Construction 1 Alumina Substrate 5 External Electrode (Sn) 2 Bottom Electrode (Ag) 6 Resistor Layer (RuO 2 ) 3 Top Electrode (Ag/Pd) 7 Primary Overcoat (Glass) 4 Barrier
More informationApproval sheet. WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice.
WLCW1608HQ SMD Wire Wound Ceramic Chip Inductors (High Q) *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608HQ Series_V3.0 Jun. 2017 Features 1. Standard chip
More informationApplication. Features
Anti-Sulfur SMD Array Chip Resistor STA Series Application Entertainment: Stereo, TV tuners, Tape recorder Appliance: Air conditioner, Refrigerator Computer & relative products: Main board, PDA Communication
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationSPECIFICATION FOR APPROVAL
SPECIFICATION FOR APPROVAL CUSTOMER CUSTOMER P/N OUR DWG No Lead-Free & RoHs Compliance!! QUANTITY Pcs. DATE 2010/11/01 ITEM SBK160808T-121Y-N COMPONENT ENGINEER ELECTRICAL ENGINEER MECHANICAL ENGINEER
More informationWT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206
WT04X ±5%, Convex Type 10p8R Chip resistors network Size 1206 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WT04X Ver.13 Sep.-2008 FEATURE 1. Small size and light weight 2. Reduced
More informationSMD Wire Wound Chip Inductor
GSW Series SMD Wire Wound Chip Inductor Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high Q factors
More informationCC06H High I 2 t Chip 0603 size fuses
Technical Data 4346 Supersedes June, 2014 Pb HALOGEN HF FREE Applications For secondary circuit protection in space constrained applications: LCD Backlight inverters Digital cameras DVD Players Bluetooth
More informationAPPLICATIONS Smart phone, Tablets, Notebook, LCD TV, Power supplies. P (0.081) 1.35 (0.050) 1.50 (0.059) max
FEATURES Conductive polymer electrode Benign failure mode under recommended use conditions Lower 3x reflow 260 C compatible CV range: 0.47-470μF / 2.5-125V 18 case sizes available APPLICATIONS Smart phone,
More informationDATA SHEET QW0905-LHY22840/S11-PF/TBS-1 TAPE AND BOX TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only REV.
TAPE AND BOX TYPE ED AMPS Pb ead-free Parts HY22840/S11-PF/TBS-1 DATA SHEET DOC. NO : QW0905-HY22840/S11-PF/TBS-1 REV. : A DATE : 23 - Jul.- 2006 Package Dimensions IGITEK EECTRONICS CO.,TD. Page 1/6 P2
More informationData sheet SMD Wire Wound Chip Inductor WL Series
Data sheet SMD Wire Wound Chip Inductor W Series Scope -Ceramic body and wire wound construction provide highest s available.. Features -Ceramic base provide high -Ultra-compact inductors provide high
More informationWF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors
WF20M / WF12M / WF08M / WF06M 0/-20% and 0/-30% Trimmable chip resistors Size 2010, 1206, 0805, 0603 Page 1 of 7 WFxxM Trimmable_V11 Apr.2010 FEATURE 1. Reduced size of final equipment 2. Lower assembly
More informationWF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.5% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHD ±0.5% Ver.13 March.-2010 FEATURE
More informationWF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402
WF12H, WF08H, WF06H, WF04H ±0.1% High precision chip resistors Size 1206, 0805, 0603, 0402 Customer : Approval No : Issue Date : Customer Approval : Page 1 of 7 WFxxHB ±0.1% Ver.13 Sep.-2008 FEATURE 1.
More informationNTC Thermistor:TTC05 Series
Features 1. RoHS compliant 2. Halogen-Free (HF) series are available 3. Body size: Ф5mm 4. Radial lead resin coated 5. Operating temperature range: -30 ~+125 6. Wide resistance range 7. Cost effective
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Token Electronics Industry Co., Ltd. Version: July 12, Web:
Version: July 12, 2018 (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd.,
More information1 8 WK L_V_AUTO_V01 FEB
WK12L, WK20L, WK25L 1%, 5% Thick Film Power Chip Resistor Wide Termination RoHS compliant and Halogen free Size 0612, 1020, 1225 Automotive AEC Q200 Compliant ASTM B-809-95 Compliant *Contents in this
More informationENTERY INDUSTRIAL CO., LTD. E&T ELECTRONICS (DONG GUAN) CO., LTD. E&T ELECTRONICS (SU ZHOU) CO., LTD.
TO SPECIFICATION FOR APPROVAL DESCRIPTION: Pitch 1.00mm Non-ZIF FPC Connector, R/A, SMT Type Dual CUSTOMER PROD.NO/DWG.NO: E&T PROD.NO: 7182K-XXXN-00X APPROVAL SHEET NO: E&T DWG. NO./DOCUMENT: 7182K-XXXN-00X
More information(LRF) 4-Terminal Connection Kelvin Current Sensing Chips. Electronics Tech. Direct Electronics Industry Co., Ltd. Version: July 17, 2018
Version: July 17, 2018 Electronics Tech. (LRF) 4-Terminal Connection Kelvin Current Sensing Chips Web: www.direct-token.com Email: rfq@direct-token.com Direct Electronics Industry Co., Ltd. China: 12F,
More informationWLCW1608 SMD Wire Wound Ceramic Chip Inductors
WLCW1608 SMD Wire Wound Ceramic Chip Inductors *Contents in this sheet are subject to change without prior notice. Page 1 of 7 ASC_WLCW1608 Series_V7.0 Jun. 2017 Features 1. Standard chip size bobbin with
More informationYAGEO CORPORATION Lead-Free & RoHs Compliance!!
Lead-Free & RoHs Compliance!! SPECIFICATION FOR APPROVAL CUSTOMER: CUSTOMER P/N: OUR DWG No: QUANTITY: Pcs. DATE: ITEM: PBY321611T-SERIES-N SPECIFICATION ACCEPTED BY: COMPONENT ENGINEER ELECTRICAL ENGINEER
More informationTemperature Coefficient of Resistance Temperature Coefficient of Resistance, Tracking Maximum Operating Voltage Insulation Resistance
.220 Small Outline Dual-In-Line Thick Film Surface Mount Resistor Networks RoHS Compliant Electrical Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25 C Operating Temperature Range Temperature
More informationTablet PC Automotive applications Printer Security systems VOP (V) Ibreak (A)
Description Current Limiting Module (CLM) is a chip type surface mountable device that can protect against both overcurrent and overcharging. It comprises a fuse element to ensure stable operation under
More information