Available in a wide range of colours.
|
|
|
- Miles Crawford
- 6 years ago
- Views:
Transcription
1 Prevent dust, sand and water from getting into switches. On toggle versions, also prevent ice from blocking lever action Compatible with frontal sealing options (K and X408). Available in a wide range of colours. When necessary, a sealing ring or washer is supplied with the boot. MATERIALS AND SPECIFICATIONS Boot material : neoprene or silicone (see comparative advantages below) Nut material : brass, nickel plated or black Operating temperature : neoprene boots : 20 C to +50 C silicone boots : 40 C to + 85 C ++ : excellent, + : good, : poor COMPARATIVE ADVANTAGES TEMPERATURE RANGE LOW IG ELASTICITY UG1410AR1 MECANICAL RESISTANCE Silicone Neoprene + ++ DIFFERENT TYPES OF BOOTS * Colour options available Fulltoggle (standard) * alftoggle * Twopart (no metal parts accessible) * For double sealing Nut EXAMPLES OF MOUNTING The company reserves the right to change specifications without notice. 2 APEM
2 For toggle switches For bushing Ø 6 x 0.75 (.236 x 0.75) 5500 series NUT N (U1341) N (U1343) FULLTOGGLE S N (U13416) N (U13436) N3216V005 (U13413) N3216V002 (U13433) N3216B005 (U13417) N3216B002 (U13437) (.527) ø12.00 (.472 DIA) ex ex N (U1302) N (U1304) N (U13026) N (U13046) N3212V005 (U13023) N3212V002 (U13043) N3212B005 (U13027) N3212B002 (U13047) (.527) 11 (.433) For bushing Ø 6,3540NS (1/440UNS) 5000 and series NUT N (U1331) N (U1333) FULLTOGGLE S N (U13316) N (U13336) N3316V005 (U13313) N3316V002 (U13333) N3316B005 (U13317) N3316B002 (U13337) (.527) ø12.00 (.472 DIA) ex N (U1229) N (U12296) N3312V005 (U12293) N3312B005 (U12297) (.527) ex N (U1231) N (U12316) N3312V002 (U12313) N3312B002 (U12317) 11 (.433) For bushing Ø 6,3540NS (1/440UNS) 5000 and series BOOTS SUPPLIED AS 2 SEPARATE PARTS NEOPRENE SILICONE (.559) N (U5149) N (U51496) N3313V119 (U51493) N3313B119 (U51497) ø11.00 (.433 DIA) Once the boot is mounted onto the panel, no switch metal part is accessible any more. For bushing Ø 10 x 0.75 (.393 x 0.75) series KNURLED NUT FULLTOGGLE S N (U1612) N (U1614) N (U16126) N (U16146) N3415V005 (U16123) N3415V002 (U16143) N3415B005 (U16127) N3415B002 (U16147) (.726) ø18.00 (.709 DIA) For bushing Ø 11,932 NS (15/3232NS) 12000, 5000M, 3500 and 6000 series N (U1031) FULLTOGGLE S N (U10316) N3511V005 (U10313) N3511B005 (U10317) (.905) N (U1024) N (U10246) N3511V002 (U10243) APEM 3
3 For toggle switches For bushing Ø 11,932 NS (15/3232NS) 12000, 3500 and 6000 series ALFTOGGLE S N (U1600) N (U1602) N (U16006) N (U16026) N3511V015 (U16003) N3511V012 (U16023) N3511B015 (U16007) (.457) For bushing Ø12 x 0.75 SI (.472x.075 IS) 12000, 3500, 3600 and 600 series FULLTOGGLE BLACK NEOPRENE BOOT N (U2252) (1.196) Ø12.00X0.75SI (.472X0.75IS DIA) Ø20.20 (.795 DIA) For bushing Ø12 x 0.75 SI (.472x.075 IS) 600 series with 5 long lever FULLTOGGLE BLACK NEOPRENE BOOT N (U2197) (1.968) Ø12.00X0.75SI (.472X0.75IS DIA) Ø27.00 (1.062 DIA) For bushing Ø12 x 0.75 SI (.472x.075 IS) 4450, 4650 and 1600 series FULLTOGGLE BLACK NEOPRENE BOOTS N (U09) (.744) N (U223) For bushing Ø 12 x 0.75 SI (.472x.075 IS) 600, 660, 1000, 1500 and 3600 N (U1565) N (U1567) FULLTOGGLE S N (U15656) N (U15676) N3611V005 (U15653) N3611V002 (U15673) FULLTOGGLE BLACK NEOPRENE BOOTS N3611B005 (U15657) (.900) N (U851) N (U853) 4 APEM
4 For toggle switches or pushbutton switches For bushing Ø 12 x 0.75 SI (.472x.075 IS) 600, 660, 1000 and 3600 series ALFTOGGLE S N (U1151) N (U11516) N3611V015 (U11513) N3611B015 (U11517) N (U1153) N (U11536) N3611V012 (U11533) (.457) ALFTOGGLE BLACK NEOPRENE BOOTS N (U598) N (U600) For bushing Ø 4 x 0.70 (.157 x 0.70) 9500 series PUSBUTTON S N (U1829) N (U1831) N (U18296) N (U18316) N3122V005 (U18293( N3122V002 (U18313) N3122B005 (U18297) N3122B002 (U18317) 6.80 (.267) 8 (.315) For bushing Ø 6,3540NS (1/440UNS) 18000, 9000 and series NUT N (U1401) N (U1403) PUSBUTTON S N (U14016) N (U14036) N3326V005 (U14013) N3326V002 (U14033) N3326B005 (U14017) N3326B002 (U14037) (.433) ø12.00 (.472 DIA) ex N (U1318) N (U13186) N3322V005 (U13183) N3322B005 (U13187) (.433) ex N (U1320) N (U13206) N3322V002 (U13203) N3322B002 (U13207) 11 (.433) For bushing Ø 6,3540NS (1/440 UNS) 8000 series KNURLED NUT N (U4301) PUSBUTTON S N (U43016) N3326V125 (U43013) N3326B125 (U43017) (.455) ø12.00 (.472 DIA) For bushing Ø 10 x 0.75 (.393 x 0.75) series KNURLED NUT N (U1624) N (U1626) PUSBUTTON S N (U16246) N (U16266) N3425V005 (U16243) N3425V002 (U16263) N3425B005 (U16247) N3425B002 (U16267) (.504) Ø (.709 DIA) APEM 5
5 For pushbutton switches For bushing Ø 11,932 NS (15/3232UNS) 13000X778, 13000X768 and 80006X934 series PUSBUTTON S N (U589) N (U5896) N3521V005 (U5893) N3521B005 (U5897) (.504) N (U590) N (U5906) N3521V002 (U5903) For long plunger (9) care should be taken over the panel thickness. For bushing Ø 12 x 0.75 SI (.472x.075 IS) 1200, 4700 and 4800 series PUSBUTTON S N (U1654) N (U16546) N3621V005 (U16543) N3621B005 (U16547) N (U1656) N (U16566) N3621V002 (U16563) (.504) PUSBUTTON BLACK NEOPRENE BOOTS N (U31) N (U225) Chrome plated N (U224) For double sealing on IC, I, IL, IM, IP and IBIS series Transparent U5125 Blue U51251 U51252 Red U (.377) Ø19.00 (.748 DIA) For double sealing on IA series Operating temperature : 40 C to +85 C The flat seal or ORing supplied with the switch should not be used with this boot. Ø16.00 (.629 DIA) Green Yellow Red U6602 U6603 U6605 U (.267) Ø21.00 (.826 DIA) For IZ series TRANSPARENT N3822D005 N3822D (.287) Panel thickness : For models IZP and IZN, panel thickness should be 4 mm (.157). No restriction for IZM models. 21 (.826) 6 APEM
6 For pushbutton switches or rocker switches For AV series (models with Ø 19 mm bushing) U21872 Green U21873 Grey U21874 Yellow U21875 Red U21876 White U21877 Transparent U (.161) Ø23.00 (.905 DIA) For FP 24mm series Red Transparent FP0292 FP0296 FP0298 For LPI series Transparent U3082 U3088 For FM series (.992) 9.50 (.374) Ø46.50 (1.830 DIA) 7.60 (.299) TRANSPARENT PVC BOOT U (.740) For KG series BLACK U (.649) (.551) Also available with padprinted symbols : on request (1.062) (2.007) APEM 7
7 For pushbutton switches or rocker switches 8 APEM
8 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Apem: U21874 U21875 U225
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
Attractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
IP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range
I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches
Common features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
AV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
Pushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS
00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,
Custom products Section JA
Tetes_Sections 202-DEF_ p INTROS Chap+guide/def 22//2 0:47 Page Custom products Section A ERMEC, S.L. BARCELONA C/ Francesc Teixidó, 22 E-0898 Badalona (Spain) Tel.: (+34) 902 450 60 Fax: (+34) 902 433
AV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight
istributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. BP Series Pushbutton Switches, Splashproof Boot Seals A wide selection of
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
Knob handles IP
Knob handles IP1 2.04.04 Index Description Page 3 Technical features: Page 4 Range and overall dimension of the knobs without pushbutton: Range and electric diagrams of the knobs with pushbutton: Pages
4000 series Industrial resistive joysticks
The 4000 Series is a range of robust, industrial quality potentiometer joysticks for internal and external applications. All 4000 Series share the same, all metal mechanism to provide the finest performance
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
A1-A01-A02-A03 series
A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
4000 series Industrial resistive joysticks
CABLE 4000 series TECHNICAL Distinctive features and specifications Two standard mounting options Low current drain Variety of potentiometer options Robust All metal mechanism IP65 above panel Inherently
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
APEM. K range. Power rocker switches and indicators. Unique rocker design
APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators
Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS
Switches. Common Used Terminology:
Switches Product Description Page# Ball Switches 158 Breakaway Switch 158 Master Disconnect Switch Battery Master Disconnect Switch & Face Plate 159 Plunger Switch Sealed 158 Push/Pull Switches Medium-Duty,
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
Attractive rugged rocker switch
istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
APEM SERIES - POTENTIOMETER JOYSTICKS TWO STANDARD MOUNTING OPTIONS LOW CURRENT DRAIN IP65 ABOVE PANEL.
R 2.65 51.20 18.20 1.85 R 3.00 17.50 dia APEM R 4.50 28.75 3.60 4000 SERIES - POTENTIOMETER JOYSTICKS TWO STANDARD MOUNTING OPTIONS LOW CURRENT DRAIN IP65 ABOVE PANEL VARIETY OF POTENTIOMETER OPTIONS ROBUST,
Product features. Mechanical life endurance
H Series 10 - Subsubminiature snap-action switches ip 67 Product features Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for
Simulator switch, magnetic operation
Description Single pole, miniaturised aircraft simulator switch with extremely fast magnetic trip time. Blade, screw and wire wrap terminals. Aircraft style threadneck and push/pull button with white trip
Type Description Order Nº Packing Qty. IP 65 junction box complying with DIN VDE 0606, U i
Nautic 025 80 x 80 x 52 mm with self-sealing, soft entry membranes M 20 seal range 2-16 mm Cable range 1-4 mm² Nautic 025 L empty, grey 490 902 01 60 / 3 Nautic 025 2.5 2, grey, 5-pole 1.5-4 mm² screw
Inserts for square and rectangular tubes
Inserts for square and rectangular tubes 35 Outer tube dimensions Ribbed inserts/plugs with smooth sliding surface for square and rectangular tubes. The tube inserts are suitable for tubes with a wall
Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing
A02 SERIES ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5
ILLUMINATED OR NON-ILLUMINATED PUSHBUTTON SWITCHES Panel cut-out Ø22 or 29.5 x 21.5 A pushbutton assembly requires: screen + lamp (if illuminated) + operator + one or two switchblocks To order these elements,
series Micro-signal switches
Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
CODED SWITCHES SPACERS PART NO. PART NO. SCREWS FOR FIELD ASSEMBLY OF THUMBWHEEL SWITCHES (2 screws needed per assembly nuts)
3P SERIES,.100 THK. (Makes section pitch.400 ) 663602000 663609000 3 SERIES FRONT MOUNT, FITS TYPE 0 & 3,.078 THK. (Makes section pitch 10mm) 410802000 410809000 3 SERIES REAR MOUNT, FITS TYPE 2,.150 THK.
Power distribution systems - accessories
Connections and terminals Line terminal X 221 3 01 Power-D-Box with sockets pre-wired Line terminal (max. 63 A) X 221 3 01 14.551 max. tightening torque 3.0 Nm 15.591 busbar X1, X2 blade terminals 6.3
or 0.5Ω whichever is greater (152 only) Temperature Coefficient of Resistance MODEL 152 MODEL 159 Refer to standard
Model 152, 159 FEATURES Rugged, High-Quality, All Metal Housing Short Length Behind Panel (11/32 ) Choice of Two Elements for Broad Resistance Range- 5Ω to 2MΩ No Glued Joints Extra Taps AVAILABLE High
600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
SEALING SPECIALISTS. APM Hexseal has a solution looking for your problem. ISO 9001:2008 Registered (800)
CATALOG # HEX-SC-01 Rev. B Sealing Boots & Bushings Switch and Potentiometer Boots Circuit Breaker Boots Specialty Bushing Seals Custom Elastomeric Sealing Solutions Self-Sealing Hardware Proudly manufacturing
TURQUOISE STROKE SWITCHES
Long Stroke and Sliding Contact Construction Sealed Switches TURQUOISE STROKE SWITCHES 13.3 10.1 (Unit: ) RoHS compliant FEATURES For pin plunger type, it maintains a long stroke OT (Over Travel) with
Optolite Products. Press to Test Type Incandescent Miniature General Purpose Size T-1 ¾
tube and nuts, aluminum, black anodized per steel. Brass terminals, tin plated per per L-P-349. See Selection Guide. hole.500 in. ±015 in. dia. Approximately.4 oz. less lamp. 03-91080 Type General Purpose
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive)
SWITCH SELECTION GUIDE Trim Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive) MT T1 Quiet Operation, Momentary 10mA @ 5VDC IP64, IP68S 11/16 dia. Threaded SPST (x2)
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
Our Most Important Connection is with You. SECTION 17. Tooling & Accessories R280 / R282
SECTION 17 Tooling & Accessories R280 / R282 Contents Joule effect soldering devices... 17-4 Stripping tools...17-4 and 17-7 Point gauges... 17-4 Soldering... 17-5 Installation tools...17-5 to 17-6 Cassettes...
Low Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
APEM COMPONENTS LIMITED
APEM COMPONENTS LIMITED Designed and manufactured in the UK Illuminated pushbuttons and indicators, Keylock, Lever and Emergency Stop Switches APEM designs and manufactures three product lines: miniature
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
Accessories product range
Accessories 199 Accessories product range Type SB/SBF (spiral tape) Spiral tapes are used to bundle cable harnesses efficiently and simply. The spiral tapes also protect the insulation of the wires. Page
G1/8-3/2-Way Valves - Series K9
PDE600PNUK 3/-Way Valves - Series K9 G1/8-3/-Way Valves - Series K9 Actuation: indexed spring return indexed, secured in two positons Pushbutton Cam operation Toggle cam operation Plunger operated Cam
Accessories Cable glands
Accessories Cable glands 235 Technical data Cable glands Brass hexagon cable gland Brass sealing cable gland Material: Brass, nickel-plated Gasket: Soft rubber Protection type IP 54 Additional information:
Control Buttons / Switches for Panel Mounting Series 8003
www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch > 2 contact elements > Spring clamp
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
T2 Terminator Tooling Specification Sheet Part No
T2 Terminator Tooling Specification Sheet Part No. 63850-7000 FEATURES It is ideally suited for mid-volume bench operations This terminator can be installed in the TM42 and the TM40 press or Base Unit
DP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
GM/GMN Series Industrial standard/din B/ISO 6952
Industrial standard/din 43650-B/ISO 695 GM/GMN Series Cable socket, self-assembly Product features durable angled connectors, dust and splash protected (IEC 6059 IP 65) vibration-proof locking using a
M8 Series. Key features: BUCCANEER
Bulgin s M8 circular connectors and overmolded cables are designed to fulfil the ever growing demand for sensor, actuator and data connections in process control, industrial machinery and factory automation
PLK & PLR SERIES Professional keylock or rotary switches
ISO OO AFAQ N /77c PLK & PLR SERIES Professional keylock or rotary switches NEW RANGE Miniature & subminiature to positions to poles PLK - PLR SERIES PROFESSIONAL KEYLOCK OR ROTARY SWITCHES Distinctive
DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. accuracy according to IEC 60770: 0.
DMK P Industrial Pressure Transmitter Pressure Ports With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: 0.5 % FSO Nominal pressure from 0... 60 bar up to 0... 400 bar Output signals
SERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
Indicator Lights Neon, LED and Filament Lamp
Indicator ights Neon, ED and Filament amp Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 100/130V (marked 110V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, White
Polyester-Enclosures MBP
24 MULTI-BOX Enclosure solutions Polyester-Enclosures MBP Protection class IP 66 MBP-Enclosures correspond with the high requirements of the mechanical engineering, shipbuilding, galvanic and petrochemical
Electrical Accessories - 1 of 7
Rocker Grid Switches Architrave Switches Electrical Accessories - 1 of 7 81101 1 Gang 20 AMP 2 way switch 81111 1 Gang 20 AMP intermediate switch 81102 2 Gang 20 AMP 2 way switches 81103 3 Gang 20 AMP
UNION-EX Series Cable glands and accessories for applications in potentially explosive atmospheres
UNION-EX Series Cable glands and accessories for applications in potentially explosive atmospheres UNION-EX Series > METAL CABLE GLANDS (by RCN) > REFERENCE STANDARDS EN 61241-0 Electrical apparatus for
LUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
DMP 331P DMP 331P. Industrial Pressure Transmitter. Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm
DMP P Industrial Pressure Transmitter Pressure Ports And Process Connections With Flush Welded Stainless Steel Diaphragm accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % FSO Industrial
A1-A01-A02-A03 series Industrial controls
A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary
DMK 331P DMK 331P. Industrial Pressure Transmitter. Pressure Ports With Flush Welded Stainless Steel Diaphragm. Pressure Transmitter.
TEMATEC GmbH Postal address:: Postbox 6 House address Löhestr. 7 5759 Hennef 577 Hennef Fon (+49) 0 4-87 0-0 Fax (+49) 0 4-87 0-0 http: // www.tematec.de e-mail: team@ tematec.de TEMATEC GmbH Data Sheet
SWITCHES FOR TOUGH ENVIRONMENTS
SWITCHES FO TOUGH ENVIONMENTS Industrial & IP-ated Switches NKK Authorized Distributor Contact us for quotes or additional product info: 1.800.590.4055 http://hughespeters.com/contact/ Industrial & IP-ated