PLK & PLR SERIES Professional keylock or rotary switches
|
|
- Joshua Fisher
- 5 years ago
- Views:
Transcription
1 ISO OO AFAQ N /77c PLK & PLR SERIES Professional keylock or rotary switches NEW RANGE Miniature & subminiature to positions to poles
2 PLK - PLR SERIES PROFESSIONAL KEYLOCK OR ROTARY SWITCHES Distinctive features PLK SERIES - KEYLOCK SWITCHES Tapered lock face or positions Single or double pole Indexing : 0 (single pole) or 0 (double pole) Up to 00 different keys Double entry keys (can be inserted into the lock either way up) disc lock type Miniature size, occupy small panel area Rear projection less than 0 mm from panel Easily assembled through front of panel Option : sealed terminals Models with straight lock face available on request PLR SERIES - MINIATURE ROTARY SWITCHES to positions to poles Indexing : 0 on standard models, 0 or 0 optional Models with continuous rotation Adjustable stop to restrict number of position Shorting (make before break) or non shorting (break before make) contacts or Options available : - no bush version - rear drive version - sealed terminations PLRT SERIES - SUBMINIATURE ROTARY SWITCHES Standard TO- housing to positions Single or double pole indexing Continuous rotation available on -position models Actuator : spindle Option : protective cover Models with screwdriver slot available on request Dimensions : First dimensions are in mm while inches are shown as bracketted numbers. Tolerance : The general tolerance for dimensions in this brochure is +/- 0, (.0). Dimensions, specifications and data shown in this brochure are subject to change without notice.
3 PLK SERIES PROFESSIONAL KEYLOCK SWITCHES Tapered lock face GENERAL SPECIFICATIONS Max. current/voltage rating (resistive) : 0,A 0VDC Life :.000 cycles Initial contact resistance : 0 mω max. Insulation resistance : 0 MΩ min. Dielectric strength : 70 Vrms. Operating temperature : -0 C to + C Lock type : disc Standard hardware supplied : hex nut MATERIALS Case : polyester, glass filled Bushing : zinc alloy, chrome plated Contacts : brass, silver plated PANEL CUT-OUT Ø.00 (. DIA).00mini (.MIN) Movement Number of positions Number of poles Key withdrawal position Indexing Number of keys Key sets MODEL NO Switching diagram same 00 different PLKB0 PLKB 0 0 same PLKB 0-0 same PLKB0 0 0 same PLKB different PLKB OFF Dimensions.0 (.07).00 (.).00 (.) 7.0 (.).00 (.7) 7.0 (.).00 (.).00 (.).0 (.07) Ø7.00 (. DIA).0 Maxi (.77 MAX) Ø.00x.00SI (. DIAx.00IS) Ø.00 (. DIA) Ø.00x.00SI (. DIAx.00IS).0 Maxi (.77 MAX)
4 PLR SERIES PROFESSIONAL MINIATURE ROTARY SWITCHES GENERAL SPECIFICATIONS Max. voltage (resistive) : 0V AC/DC Max. current : 0mA Initial contact resistance : 0 mω max. Insulation resistance:.000 MΩ min. Dielectric stregth :.000 Vrms Life :.000 cycles Operating torque :, Ncm ± End stop torque :, Ncm min. Fixing torque :, Ncm max. Operating temperature : -0 C to + C Standard hardware supplied : hex nut and locking ring Special accessories (buttons) : see page 7 MATERIALS Moulded parts : PA /, glass filled Contacts : brass, gold or silver plated, depending on version Ø.0 (.0 DIA) PANEL CUT-OUT Ø.0 (. DIA).0 (.7) Dimensions Ø.0 (.0 DIA).00 (.). (.).00 (.) Ø.0 (.7 DIA) B C A D Ø.0 (. DIA ) Ø.00X0.7SI (. DIA X0.7IS).00 (.07). (.7) Ø.0 (.0 DIA) 7 Ø.0 (. DIA) Ø7.0 (.0 DIA) Available configurations (top view) 0 INDEXING (standard) (models listed opposite) pole, pos. 7 poles, pos. 7 poles, pos. poles, pos. 0 INDEXING (on request) pole, pos. poles, pos. poles, pos. poles, pos. 0 INDEXING (on request) pole, pos. poles, pos. poles, pos.
5 PLR SERIES PROFESSIONAL MINIATURE ROTARY SWITCHES Models with 0 indexing Metric type Spindle length : mm Spindle diameter : mm Bushing : L mm, M x 0,7 Preferred DESCRIPTION pole, positions pole, positions, continuous rotation poles, positions poles, positions, continuous rotation poles, positions poles, positions Contact material Shorting Non-shorting Silver plated PLR PLR Gold plated PLR7 PLR7 Silver plated PLR7 PLR Gold plated PLR7 PLR7 Silver plated PLR PLR Gold plated PLR7 PLR77 Silver plated PLR7 PLR Gold plated PLR7 PLR7 Silver plated PLR0 PLR0 Gold plated PLR7 PLR7 Silver plated PLR0 PLR70 Gold plated PLR7 PLR Silver plated PLR PLR Gold plated PLR7 PLR7 Silver plated PLR PLR Gold plated PLR7 PLR70 Silver plated PLR PLR Gold plated PLR70 PLR7 Silver plated PLR PLR7 Gold plated PLR7 PLR70 Silver plated PLR PLR Gold plated PLR7 PLR7 Silver plated PLR PLR7 Gold plated PLR7 PLR77
6 PLRT SERIES PROFESSIONAL SUBMINIATURE ROTARY SWITCHES Spindle models GENERAL SPECIFICATIONS Max. current/voltage rating (resistive) : 0,A VAC - 0,A VAC - 0,A 0VDC Contact resistance : - initial : 0 mω max. - after.000 cycles : 0mΩ max Insulation resistance :.000 MΩ min at 00VDC Dielectric strength :.000 Vrms Life :.000 cycles Operating torque :, to, Ncm Operating temperature : -0 C to + C Accessory (protective cover) : see page 7. MATERIALS Case : polyester, glass filled Contacts : brass, gold plated Terminals : copper alloy, gold plated DIAGRAM C 7 Model numbers and dimensions Movement 0 Number of positions Continuous rot. MODEL NO PLRT Ø.0 (. DIA) (.0).7 (.).0 (.). (.) 0 PLRT PLRT 0 PLRT PLRT Ø.0 (. DIA) Ø0.7 (.0 DIA) 0.7 (.0) 0.7 (.0) Ø.0 (. DIA) 0.7 (.0)
7 ACCESSORIES For PLR and PLRT series Straight knurl knob for PLR series Ribbed knob for PLR series Ø.00 (.7 DIA) Ø.00 (. DIA).0 (.7).0 (.) Natural anodized aluminium U7.00 Black plastic U Black anodized aluminium U Protective cover for PLRT series Ø.00 (. DIA).00 (.0) U 7
8 The subminiature range Z series T series SMT T series IK series NK series PHAP series CR series 000 series Corporate sales Centre d'affaires Paris Nord - BP 00 Tour Le Continental Le Blanc Mesnil Cedex - France Tel.: (+) - Fax: (+) apem.com@wanadoo.fr Customer Service and Registered Office, avenue Edouard Herriot - BP 0 Caussade Cedex - France Tel.: (+) - Fax: (+) 0 commercial@apem.fr web : PLKPLR00-A
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationMomentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
More information1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break
Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts
More informationMomentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
More informationCUSTOM AND INTEGRATED ASSEMBLIES
A WORLD OF SWITCHING CAPABILITIES... and more! A new concept in switch technology CUSTOM AND INTEGRATED ASSEMBLIES APEM designed this custom integrated assembly to their customer s specifications, resulting
More information18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
More information8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
More informationAV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
More informationPushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More information13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
More informationAV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67
More informationIP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS
More information600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview
600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationRTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
More informationSelection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationM Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
More informationIL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationSealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationIR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS
SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More informationROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
More informationProduct Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
More informationC&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
More information3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features
HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationE Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
More informationSERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
More information2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
More informationPushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL
More informationSERIES 16, 18, 26 & 19N MICROSWITCH RANGES
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals
More informationRotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
More information.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
More informationIHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high
More informationSeries 270. Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors. Electrical and Mechanical Specifications.
Series 270 Commercial Miniature 5/8" (16mm) Diameter Composition Variable Resistors Miniature 5/8" (16mm) size Versatile mounting styles: bushing twist tab bend tab snap-in PC bracket solder lug or PC
More informationPushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS
More informationIHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
More information.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
More information5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
More informationIR series Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More information600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
More informationAPEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large
More informationSealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range
I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches
More informationET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
More informationAPEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator
APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features
More informationA02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
More informationGeneral Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
More informationELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
More informationS and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
More informationRTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More informationSELECTOR SWITCH TYPE 04
SELECTOR SWITCH TYPE 0 MAIN FEATURES VERY ROBUST, MULTI WAFER, UP TO POSITIONS 5'000 switching cycles with up to 0 Ncm switching torque Gold plated contacts: micron Optional IP68 front panel sealing Operating
More informationIQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
More informationINDUSTRIAL CONTROLS. Description. Products & features. Specifications. Illuminated or non-illuminated pushbutton switches.
INDUSTRIAL CONTROLS E A01 SERIES Panel cut-out.630" (16mm) Description Products & features Specifications Illuminated or non-illuminated pushbutton switches Indicators Rotary lever switches eylock switches
More informationSPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More information600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN
SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings
More informationToggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
More informationDip and coded rotary switches
Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT
More informationSeries 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
More informationFP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationC&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationA Type Switch Assemblies. With Silver - Plated Brass Contacts and Solder Terminals
A Type 1 inch diameter switches with Electroswitch patented Unidex detent for positive action, feel and torque control. Double-wiping, self-cleaning contacts in silver plated brass, or silver alloy. Unique
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationMINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More information2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
More informationDistinctive Characteristics
Distinctive Characteristics High insulating material for 6mm CKM models withstands over 5 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 9mm CKL models
More informationA1-A01-A02-A03 series
A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or
More informationCommon features. Installation options. Aesthetic options
New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More informationFP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching
Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationY Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
More informationT he Cole Series S3900 miniature P.C. termination rotary switch
S3900 series T he Cole Series S3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationACCESS SOLUTIONS NEW PRODUCTS BROCHURE.
ACCESS SOLUTIONS NEW PRODUCTS BROCHURE www.essentraaccesssolutions.com ESSENTIAL SOLUTIONS DELIVERED NEW PRODUCTS Locks Hinges Gaskets Handles Stainless Steel Products Electronic p3-6 p13 14 p17-18 p7-8
More informationSWITCHES. Other switch types include conventional, push-button and toggle switches.
Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile
More informationDIM. A (+ 0,05 0,51) .437 ±.020 (11,10 ± 0,51) DIM. F ±.015 (0,38) INTEGRAL ASSEMBLY NUT, DO NOT REMOVE
Multi-Deck SERIES,, and " Diameter, Amp, Standard, Military SR0 FEATURES Rugged Construction Insures Switch Operation for the Life of Your Equipment Many Circuitry Options MIL Qualified Versions MIL-S-/0
More informationT he Cole Series P3900 miniature P.C. termination rotary switch
P3900 series T he Cole Series P3900 miniature P.C. termination rotary switch is designed to provide the ultimate mechanical and electrical reliability in instrumentation, industrial controls, medical equipment,
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More information