Accessories, Maintenance, Workshop & Attachments

Transcription

1 2014 Accessories, Maintenance, Workshop & Attachments

2 TABLE OF CONTENTS Products available in JDPoint through TS programme B Electrical...7 Light Bulbs...8 Cable Ties Electrical Wiring Fuses, Holders & Fuse boxes Connectors Relays Switches & Warning lamps...22 Plugs & Sockets...23 Horns...23 Beacons Trailer Lighting...29 Trailer Plugs & Sockets Battery accessories...34 Battery Maintenance Chargers...40 Booster cables Heavy Duty Camera Systems Camera kits for 6R Series Tractors...44 Camera kits for 7R, 8R, 9R Series Tractors...45 Camera kits for Combines and Self Propelled Forage Harvesters...46 Overview John Deere Camera Kits Universal Heavy Duty Camera Systems...48 Cargo Handling...49 Bulk Fuel Filters with Water Separation Liquid Handling...54 Funnels Measuring jugs Fuel containers Fuel Transfer pump...56 Hardware...57 Lynch Pins & Shaft Locking Pins...58 R Clips & Cotter Pins...60 Springs, Pins & Clips Sealing & Lubrication...63 Exhaust clamps...65 Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles...66 Top link pins, single and dual category, chain and handle options...68 Lower linkage pins, single and dual category and handle options...70 Implement mounting pins, single and dual category,...71 Top link assemblies and replacement ends...72 Lower link multi-hole drawbars...73 Top and lower linkage balls, quick hitch balls, conversion bushes and spacers Clevis, locking and remote locking type, drawbar pins Bolt on ball hitch pins, towing balls and ball and clevis assemblies...77 Trailer Jack...78 Moisture Testers...79 Grain Moisture Testers...80 Hay Moisture Testers...82 Baler Mounted Hay Moisture Testers...83 Tapes...86 Tapes PVC...87 Tapes Electrical Insulation...87 Tapes PTFE...87 Tapes Sealing & Masking...88 Packing tapes...88 Security tapes...88 Hand Cleaners...89 Wheel Spinners...90 Wiper Blades Seat Covers/Floor mats Seat Covers Floor mats Protection kit Portable lighting / Torches Knives Tape Measure & Ruler Safety products Safety Vest & Safety Set Gloves Safety shoes Measuring Devices Battery hydrometer Coolant / Antifreeze Tester Tyre Pressure Gauge Portable air compressor kit Radios Radios Audio Accessories Turf Accessories Carts Spreaders Gator & Riding Mower Covers Gator & Riding Mower Seat Covers Walk Behind Mower Covers Easy Turner for Riding Mowers* * (Product available in JDPoint through the TS programme RA and RB (NOTE: RC and RB for UK & Ireland, CY for Germany) Products available in JDPoint through TS programme 0T, 8T and BH Batteries StrongBox Batteries Performance Batteries Standard Batteries Trojan Batteries for E-Gator Products available in JDPoint through TS programme AE John Deere Paints Aerosols Paints Can Paints Aerosols Chemicals Products available in JDPoint through TS programme MA John Deere Grease guns & Accessories Grease guns Pumps Products available through JDMint and JDPoint Turf Attachments Snow Blower Front Blades & Brooms Weights X700 Attachments Accessories for Mower Decks & Machines Grass Collecting & Maintenance Loader & Tractor Attachments Gator Attachments It is possible to combine in one single order the products in this catalogue available through the TS programme B3 with the Collection products (toys, clothing, work wear, merchandise items, etc.). 2 Table of Contents

3 Ladies & Gentlemen, Whether you are an arable or livestock farmer, a speciality crop producer or contractor, greenkeeper or groundsman in a continuously changing business environment, you are facing a new challenge almost every day. As a result, you are looking to obtain the best possible performance, machine uptime and lowest achievable cost of operation without making compromises. John Deere has long been committed to the success of those linked to the land to the success of those who cultivate, transform, enrich and build upon it. We understand that success requires dedication so we are committing ourselves to supplying the innovative and high quality equipment necessary to support the success of those linked to the land. Regardless of which John Deere products come to mind whether you think of our equipment, components, parts and accessories, or of our John Deere Collection: they are all diligently designed and engineered, accurately manufactured and cautiously handled before our products are shipped to our customers. On our never-ending journey to further enhance the John Deere customer experience, we continue to invest in the best product quality, a great dealer network securing what matters most to you: excellent service and parts support to keep your machines running when you need them. In 2011, John Deere made its debut on Interbrand s list of its 100 Best Global Brands. This list honours companies for their commitment to core values such as innovation, customer satisfaction, ethical business conduct and sustaining high levels of quality values that we at John Deere share with you and your customers too. The 2014 John Deere Accessories catalogue has been further expanded and includes numerous new items, such as hay moisture testers, electrical wiring, fuel containers, battery terminals, etc. Take time to browse our 2014 John Deere Accessories catalogue Thank you for your ongoing trust in the John Deere brand. Yours sincerely Christoph Wigger Vice president Agricultural & Turf Sales & Marketing Europe, Northern Africa, Near & Middle East Editorial 3

4

5

6 Products available in JDPoint through TS programme B3 6 Products available in JDPoint through TS programme B3

7 Electrical Electrical 7

8 Light Bulbs (Products available in JDPoint through TS programme B3) An extensive range of popular bulbs suitable for many 12v system applications including tractors, cars, harvesters, trailers. Packed in singles or pairs in dedicated sealed clam packs allowing visibility of the product in the dealer s showroom. 12v 60/55w UEC P45t Halogen 12v 10w SCC BA15s 12v 5w SCC BA15s mm Typical application: Headlamp Package quantity: 10 MCXFA1001 Equivalent to: Lucas 012 Philips Osram GE 52070U 12v 1w Capless W2X4.6d mm Typical application: Side & Tail Package quantity: 10 Pack content: 2 MCXFA1006 Equivalent to: Lucas 245 Philips Osram 5008 GE 2641 Typical application: Side & Tail Package quantity: 10 Pack content: 2 Typical application: Indicator & Panel Package quantity: 10 Pack content: 2 MCXFA1002 MCXFA1007 mm Equivalent to: Lucas 207 Philips Osram 5007 GE 2619 mm Equivalent to: Lucas 286 Philips Osram 2721 GE v 5w SBC BA15d 12v 21w SBC BA15d Typical application: Side & Tail Package quantity: 10 Pack content: 2 Typical application: Stop/Flasher Package quantity: 10 Pack content: 2 MCXFA1003 MCXFA1008 mm Equivalent to: Lucas 209 Philips Osram 5407 GE 2618 mm Equivalent to: Lucas 335 Philips GE v 4w MCC BA9s 12v 21/5w OSP BAY15d Typical application: Side & Tail Package quantity: 10 Pack content: 2 Typical application: Stop & Tail Package quantity: 10 Pack content: 2 MCXFA1004 MCXFA v 5w Festoon S8.5d 11 X 38 mm Equivalent to: Lucas 233 Philips Osram 3893 GE v 21w SCC BA15s mm Equivalent to: Lucas 380 Philips Osram 7528 GE 1077 Typical application: Interior light Package quantity: 10 Pack content: 2 Typical application: Stop/Flasher Package quantity: 10 Pack content: 2 MCXFA1005 MCXFA1010 mm Equivalent to: Lucas 239 Philips Osram 6418 GE 7546 mm Equivalent to: Lucas 382 Philips Osram 7506 GE Light Bulbs Original equipment manufacturers names and part numbers are quoted for reference purposes only

9 Light Bulbs (Products available in JDPoint through TS programme B3) 12v 45/40w ASY P45t 12v 100w H3 PK22s Typical application: Headlamp Package quantity: 10 Typical application: Halogen Headlamp Package quantity: 10 MCXFA1011 MCXFA1016 mm Equivalent to: Lucas 410 Philips Osram 7951 GE 1931 mm Equivalent to: Lucas 483 Philips Osram GE v 55w H1 P14.5s 12v 50w PG13J Typical application: Halogen Headlamp Package quantity:10 Typical application: Halogen Headlamp MCXFA1012 MCXFA1017 mm Equivalent to: Lucas 448 Philips Osram GE 50310U mm Equivalent to: Lucas v 55w H3 PK22s 12v 55w PG13 Typical application: Halogen Headlamp Package quantity: 10 Typical application: Halogen Headlamp MCXFA1013 MCXFA1018 mm Equivalent to: Lucas 453 Philips Osram GE 50340U mm Equivalent to: Lucas v 60/55w H4 P43t mm Typical application: Halogen Headlamp Package quantity: 10 MCXFA1014 Equivalent to: Lucas 472 Philips Osram GE 50440U 12v 55w H7 PX26d mm Typical application: Halogen Headlamp Package quantity: 10 MCXFA1015 Equivalent to: Lucas 477 Philips Osram GE 58520U and are not intended to suggest that our replacement parts are made by the original equipment manufacturer. Light Bulbs 9

10 Cable Ties (Products available in JDPoint through TS programme B3) High quality, virgin Nylon 6.6, non-releasable black cable ties. All packed in bag and header card with Euroslot for display. Tensile strength MIL E. For continuous use -40 C to +85 C. Flame resistance in accordance with UL94V2. Cable tie assortment, 400 pieces Nylon 6-6 non-releasable cable ties 100 x 2.5mm Cable tie assortment, non-releasable, Nylon 6.6. Contents: 100mm x 2.5mm, 8Kg/78.4N breaking strain Black x 100, Green x 50, Yellow x mm x 3.6mm, 18Kg/176.5N breaking strain Black x 50, Green x 25, Yellow x mm x 4.8mm, 22Kg/215.7N breaking strain Black x 50, Green x 25, Yellow x pieces total contents. MCXFA1019 Minimum tensile strength 8.1kg/79.4N 00 MCXFA1020 Nylon 6-6 non-releasable cable ties 370 x 4.8mm Minimum tensile strength 22.2kg/217N 00 MCXFA1024 Nylon 6-6 non-releasable cable ties 370 x 7.6mm Minimum tensile strength 54.5kg/534.4N Pack contents: 50 MCXFA1025 Nylon 6-6 non-releasable cable ties 762 x 9.0mm Nylon 6-6 non-releasable cable ties 140 x 3.6mm Minimum tensile strength 18.2kg/178.5N 00 MCXFA1021 Minimum tensile strength 79.4kg/778.6N 0 MCXFA1026 Nylon 6-6 non-releasable cable ties 580 x 12.7mm Nylon 6-6 non-releasable cable ties 295 x 4.8mm Minimum tensile strength 22.2kg/217N 00 MCXFA1022 Minimum tensile strength 113kg/1108.1N 0 MCXFA1027 Nylon 6-6 non-releasable cable ties 1030 x 12.7mm Nylon 6-6 non-releasable cable ties 200 x 4.8mm Minimum tensile strength 22.2kg/217N 00 MCXFA1023 Minimum tensile strength 113kg/1108.1N 0 MCXFA Cable Ties

11 Electrical Wiring (Products available in JDPoint through TS programme B3) Cable reels Part Number Tech description Description Pack content Pack Qty MCXFA1850 Single core Red 50m 12.75A Suitable for repairs or auxillary applications up to 12V 12.75A continous use. 1.5mm² cross-sectional area 21 x 0.3mm strands 1 1 MCXFA1851 Single core Black 50m 12.75A Suitable for repairs or auxillary applications up to 12V 12.75A continous use. 1.5mm² cross-sectional area 21 x 0.3mm strands 1 1 MCXFA1852 Single core Blue 50m 5.75A Suitable for repairs or auxillary applications up to 12V 5.75A continous use. 0.7mm² cross-sectional area 9 x 0.3mm strands 1 1 MCXFA1853 Twin core 30m 8.75A Suitable for repairs or auxillary applications up to 12V 8.75A continous use. 2 x 1.0mm² cross-sectional area 14 x 0.3mm strands with black sheath 1 1 MCXFA1854 Three core 30m 5.75A Suitable for repairs or auxillary applications up to 12V 5.75A continous use. 3 x 0.7mm² cross-sectional area 9 x 0.3mm strands with black sheath 1 1 MCXFA1855 Seven core 30m 8.75A / 17.5A Suitable as a replacment for lighting circuits on trailers, trailed implements and removable lighting kits. Rated at 12V and has 6 x 8.75A and 1 x 17.5A earth return cables. 3 x 0.7mm² cross-sectional area 9 x 0.3mm (earth) strands with black sheath 1 1 Mini cable reels Part Number MCXFA1859 MCXFA1860 MCXFA1861 MCXFA1862 MCXFA1863 MCXFA1864 Tech description Red 5.75amp 7m Black 5.75amp- 7m Blue 5.75amp- 7m Red 8.785amp- 6m Black 8.75amp- 6m Blue 8.75amp- 6m MCXFA1865 Red 17.5amp- 3.5m MCXFA1866 Black 17.5amp- 3.5m MCXFA1867 Blue 17.5amp- 3.5m Description 7m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V 5.75A for continuous use. 0.7mm² cross-sectional area 9 x 0.3mm strands. 7m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V 5.75A for continuous use. 0.7mm² cross-sectional area 9 x 0.3mm strands. 7m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -5.75A for continuous use. 0.7mm² cross-sectional area 9 x 0.3mm strands. 6m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -8.75A for continuous use. 0.7mm² cross-sectional area 14 x 0.3mm strands. 6m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -8.75A for continuous use. 0.7mm² cross-sectional area 14 x 0.3mm strands. 6m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -8.75A for continuous use. 0.7mm² cross-sectional area 14 x 0.3mm strands. 3.5m reel of red single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -17.5A for continuous use. 0.7mm² cross-sectional area 28 x 0.3mm strands. 3.5m reel of black single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -17.5A for continuous use. 0.7mm² cross-sectional area 28 x 0.3mm strands. 3.5m reel of blue single core cable suitable for repairs or auxillary applications, contained in a convenient dispenser. Rated up to 12V -17.5A for continuous use. 0.7mm² cross-sectional area 28 x 0.3mm strands. Pack content Pack Qty Electrical Wiring 11

12 Fuses, Holders & Fuse boxes (Products available in JDPoint through TS programme B3) A great selection of handy workshop kits and packaged products. Clampacks are resealable and act as handy storage containers. 20 Amp, Maxi blade fuses Yellow 70 Amp, Maxi blade fuses Brown 4 Amp, Mini blade fuses Pink 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1820 Part Number: MCXFA1825 Part Number: MCXFA Amp, Maxi blade fuses Green 80 Amp, Maxi blade fuses clear 5 Amp, Mini blade fuses Orange 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1821 Part Number: MCXFA1826 Part Number: MCXFA Amp, Maxi blade fuses Orange 100 Amp, Maxi blade fuses Violet 7.5 Amp, Mini blade fuses Brown 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1822 Part Number: MCXFA1827 Part Number: MCXFA Amp, Maxi blade fuses Red 2 Amp, Mini blade fuses Grey 10 Amp, Mini blade fuses Red 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1823 Part Number: MCXFA1828 Part Number: MCXFA Amp, Maxi blade fuses Blue 3 Amp, Mini blade fuses Violet 15 Amp, Mini blade fuses Blue 12V (SAE J1888) Pack Content: 2 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1824 Part Number: MCXFA1829 Part Number: MCXFA Fuses, Holders & Fuse boxes

13 Fuses, Holders & Fuse boxes (Products available in JDPoint through TS programme B3) 20 Amp, Mini blade fuses Yellow 7.5 Amp Standard blade fuse (DIN) 20 Amp Standard blade fuse (DIN) 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1835 Brown 7.5 Amp Blow, 6 Amp continuous 0 MCXFA1031 Yellow 20 Amp Blow, 15 Amp continuous 0 MCXFA Amp, Mini blade fuses Clear 10 Amp Standard blade fuse (DIN) 25 Amp Standard blade fuse (DIN) 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1836 Red 10 Amp Blow, 8 Amp continuous 0 MCXFA1032 Clear/White 25 Amp Blow, 20 Amp continuous 0 MCXFA Amp, Mini blade fuses Green 15 Amp Standard blade fuse (DIN) 30 Amp Standard blade fuse (DIN) 12V (SAE J2077) Pack Content: 6 Pack Qty: 5 Part Number: MCXFA1837 Light Blue 15 Amp Blow, 12 Amp continuous 0 MCXFA1033 Light Green 30 Amp Blow, 25 Amp continuous 0 MCXFA Amp, Standard blade fuse Violet 3 Amp Blow, 2 Amp continuous 0 MCXFA Amp Standard blade fuse Tan 5 Amp Blow, 4 Amp continuous 0 MCXFA1030 Fuses, Holders & Fuse boxes 13

14 Fuses, Holders & Fuse boxes (Products available in JDPoint through TS programme B3) Blade fuse holder 4 pole fuse box 8 pole fuse box Blade fuse holder, designed for use with standard blade fuses (DIN). Bankable. Lucar terminals MCXFA pole fuse box, holds 4 standard blade fuses (DIN) (not included). Black plastic body with clear cover. Lucar terminals MCXFA pole fuse box, holds 8 standard blade fuses (DIN) (not included) Black plastic body with clear cover. Lucar terminals. MCXFA1045 Maxi fuse holder, splash proof Standard blade fuse holder, splash proof Mini Blade Fuse holder Splash proof fuse holder, designed for use with Maxi fuses. Package quantity: 3 MCXFA1138 Splash proof fuse holder, designed for use with standard blade fuses. Maximum current 30A. Package quantity: 3 MCXFA1162 Splash proof Inline fuse holder with wired tails, suitable for use with mini blade fuses. Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1838 Fuses Selection Packs 35 standard blade fuses Selection pack of 40 glass fuses (SAE J554) Selection pack of 16 maxi fuses (SAE J1888) Selection pack of 35 standard blade fuses (DIN) in a re-sealable clam, contains following sizes; 3 Amp x 5 Violet 5 Amp x 5 Tan 10 Amp x 5 Red 15 Amp x 5 Light Blue 20 Amp x 5 Yellow 25 Amp x 5 Clear/White 30 Amp x 5 Light Green Contents may vary. Pack contents: 35 Part number MCXFA1038 Selection pack of 40 glass fuses (SAE J554) in a clear plastic re-sealable clam contains following sizes; 3 Amp x 5 5 Amp x 5 10 Amp x 5 15 Amp x 5 20 Amp x 5 25 Amp x 5 35 Amp x 5 50 Amp x 5 Pack contents: 40 MCXFA1040 Selection pack of 16 maxi fuses (SAE J1888) in a clear plastic re-sealable clam contains following sizes; 20 Amp x 2 30 Amp x 2 40 Amp x 2 50 Amp x 2 60 Amp x 2 70 Amp x 2 80 Amp x Amp x 2, 6 Package quantity: 3 MCXFA ceramic fuses (DIN 72581) 35 mini blade fuses (SAE J2077) Selection pack of 40 ceramic fuses (DIN 72581) in a clear plastic re-sealable clam contains following sizes; 5 Amp x 10 Yellow 8 Amp x 10 White 16 Amp x 10 Red 25 Amp x 10 Light Blue Contents may vary. Pack contents: 40 MCXFA1039 Selection pack of 35 mini blade fuses (SAE J2077) in a clear plastic re-sealable clam contains following sizes; 3 Amp x 5 5 Amp x 5 10 Amp x 5 15 Amp x 5 20 Amp x 5 25 Amp x 5 30 Amp x 5 Contents may vary. Pack contents: 35. MCXFA Fuses, Holders & Fuse boxes

15 Fuses, Holders & Fuse boxes (Products available in JDPoint through TS programme B3) Glass & ceramic fuse kit Maxi blade fuse kit Contains 480 fuses including Ceramic (DIN 72581), Small Glass (DIN) and Standard Glass (SAE J554) in the following sizes; Ceramic 5 Amp x 50 approx 8 Amp x 50 approx 16 Amp x 50 approx 25 Amp x 50 approx Small Glass (DIN) 2 Amp x 50 approx 5 Amp x 50 approx Contents may vary Standard Glass 5 Amp x 30 approx 10 Amp x 30 approx 15 Amp x 30 approx 25 Amp x 30 approx 35 Amp x 30 approx 50 Amp x 30 approx Maxi fuses: Contains 40 high quality Maxi blade fuses (SAE J1888) in the following sizes 20 Amp x 5 30 Amp x 5 40 Amp x 5 50 Amp x 5 60 Amp x 5 MCXFA Amp x 5 80 Amp x Amp x 5 Contents may vary MCXFA1046 Blade fuse kit Selection pack of 280 high quality blade fuses (DIN) and 5 inline bade fuse holders contains following sizes; 5 Amp x Amp x Amp x Amp x Amp x 40 Part number MCXFA Amp x Amp x 40 Contents may vary Mini blade fuse kit Mini fuses: Contains 240 high quality Mini blade fuses (SAE J2077) in the following sizes; 2 Amp x Amp x 40 3 Amp x Amp x 20 4 Amp x 20 5 Amp x 20 7 Amp x Amp x 40 Part number MCXFA Amp x Amp x 20 Contents may vary Fuses, Holders & Fuse boxes 15

16 Connectors (Products available in JDPoint through TS programme B3) Large electrical terminal kit Electrical terminal assortment This has many uses including insulation of bare terminals. Easy to apply. Just slide over component and apply gentle heat. Contains the following sizes and approximate quantities: 20 x 3.2mm in red and black 40 x 6.4mm in black 10 x 9.5mm in red All 150mm in length Contents may vary Pack contents: 70 MCXFA1050 Contains a wide selection of crimp type terminals, including bullet connectors, bullet sockets, cable eyes, spades, male and female Lucar connectors and coupling sleeves. Blue fork terminal x10 Yellow fork terminal x 10 Red bullet, male x 10 Red bullet, female x 10 Blue bullet, male x 10 Blue bullet, female x 10 Red Lucar, male x 10 Red Lucar, female x 10 Blue Lucar, male x 10 Blue Lucar, female x 10 Red Lucar, male & female x 10 Blue Lucar, male & female x 10 Red 5mm ring x 10 Blue 4mm ring x 10 Blue 5mm ring x 10 Blue 6mm ring x 10 Blue 8mm ring x 10 Yellow 6mm ring x 10 Yellow 8mm ring x 10 Yellow 10mm ring x 10 Blue coupling sleeves x 10 Red conductor size mm 2 / awg Blue conductor size mm 2 / awg Yellow conductor size mm 2 / awg, The pre-insulated terminals that have an antivibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles. Contents may vary. Pack contents: 210 MCXFA1051 Contains a selection of 50 crimp type terminals covering the popular types in: 4 x Yellow 8mm eyelets 2 x Blue Butt terminals 2 x Blue 6mm eyelets 2 x Red 5mm eyelets 3 x Red male Bullet 3 x Red female Bullet 4 x Blue male Bullet 4 x Blue female Bullet 3 x Red Piggy back 3 x Blue Piggy back 2 x Blue fork terminals 2 x Red fork terminals 3 x Red male Lucar 4 x Blue male Lucar 4 x Blue female Lucar un-sleeved 3 x Red female Lucar un-sleeved 2 x Yellow fork terminals Red conductor size mm² / awg Blue conductor size mm² / awg Yellow conductor size mm² / awg The pre insulated terminals that have an anti vibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles. Contents sizes may vary. MCXFA Connectors

17 Connectors (Products available in JDPoint through TS programme B3) Electrical terminals pack Electrical terminals kit Blue Contains 450 red crimp terminals with copper inserts. 50 x 2.8mm female 50 x 4.8mm female 40 x 4.8mm insulated female 40 x 6.4mm female 40 x 6.4mm male 40 x Female bullet 40 x Male bullet 40 x Piggy back 50 x 5.3mm Ring terminals 50 x Butt terminals,10 x lock Red conductor size mm 2 / awg. The pre insulated terminals that have an anti vibration ring (copper) are as follows : male, female, piggy backs, bullets, receptacles. Contents may vary. MCXFA1053 Contains 470 blue crimp terminals with copper inserts in the following sizes and approximate quantities: 50 x 4.8mm female 50 x 6.4mm female 40 x 6.4mm fully female 50 x 6.4mm male 40 x Female bullet 40 x Male bullet 40 x Piggy back 50 x 4.3mm Ring terminals 50 x 6mm Ring terminals 50 x Butt terminals 10 x lock Blue conductor size mm 2 / awg. The pre insulated terminals that have an anti vibration ring (copper) are as follows : male, female, piggy backs, bullets, receptacles. Contents may vary. MCXFA1054 Clampacks are re-sealable so act as handy storage whilst having a heat-welded appearance. Pre-insulated terminals have a UL approval, E The pre-insulated terminals that have an anti vibration ring (copper) are as follows: male, female, piggy backs, bullets, receptacles. Connectors 17

18 Connectors (Products available in JDPoint through TS programme B3) Red lucar female terminal 6.4mm 6.4 mm red lucar female conductor size mm 2 / awg 0 MCXFA1055 Red lucar m/f terminal 6.4mm 6.4 mm red lucar male / female conductor size mm 2 / awg 0 MCXFA1060 Blue female bullet terminal 5mm 5 mm blue bullet female conductor size mm 2 / awg 0 MCXFA1065 Blue lucar female terminal 6.4mm 6.4 mm blue lucar female conductor size mm 2 / awg 0 MCXFA1056 Blue lucar m/f terminal 6.4mm 6.4 mm blue lucar male / female conductor size mm 2 / awg 0 MCXFA1061 Red ring terminal 3.2mm 3.2 mm red ring terminal conductor size mm 2 / awg 0 MCXFA1066 Yellow lucar female terminal 6.4mm 6.4 mm yellow lucar female conductor size mm 2 / awg 0 MCXFA1057 Red male bullet terminal 4mm 4 mm red bullet male terminal conductor size mm 2 / awg 0 MCXFA1062 Blue ring terminal 6mm 6 mm blue ring terminal conductor size mm 2 / awg 0 MCXFA1067 Red lucar male terminal 6.4mm 6.4 mm red lucar male conductor size mm 2 / awg 0 MCXFA1058 Blue male bullet terminal 5mm 5 mm blue bullet male conductor size mm 2 / awg 0 MCXFA1063 Blue ring terminal 8mm 8 mm blue ring terminal conductor size mm 2 / awg 0 MCXFA1068 Blue lucar male terminal 6.4mm 6.4 mm blue lucar male conductor size mm 2 / awg 0 MCXFA1059 Red female bullet terminal 4mm 4 mm red bullet female terminal conductor size mm 2 / awg 0 MCXFA1064 Yellow ring terminal 6mm 6 mm yellow ring terminal conductor size mm 2 / awg 0 MCXFA Connectors

19 Connectors (Products available in JDPoint through TS programme B3) Yellow ring terminal 8mm 8 mm yellow ring terminal conductor size mm 2 / awg 0 MCXFA1070 Yellow lucar female terminal 9.5mm 9.5 mm yellow lucar female terminal conductor size mm 2 / awg 0 MCXFA1074 Yellow ring terminal 10mm 10 mm yellow ring terminal conductor size mm 2 / awg 0 MCXFA1071 Blue scotch lock terminal 2mm 2 mm blue scotch lock terminal Pack contents: 5 MCXFA1075 Blue sleeve terminal 4.5mm 4.5 mm blue sleeve terminal conductor size mm 2 / awg 0 MCXFA1072 Red sleeve terminal 4mm 4 mm (red sleeve terminal) conductor size mm 2 / awg 0 MCXFA1076 Blue lucar female terminal 6.4mm 6.4 mm blue lucar female conductor size mm 2 / awg 0 MCXFA1073 Connectors 19

20 Connectors (Products available in JDPoint through TS programme B3) Junction box 8 way Block connector, 15A Waterproof junction box with rubber body. 8 way, screw terminals. Maximum dimensions 127mm wide, 108mm long, 42mm deep. 2 x M6 screw mounting, 45mm hole centres MCXFA1142 Connecting block, 15 Amp, 12 section. Can be cut as required. Screw terminals. MCXFA1152 Block connector, 5A Block connector 1 way Connecting block, 5 Amp, 12 section. Can be cut as required. Screw terminals. MCXFA1153 An environmentally sealed connection system that utilises silicone rubber seals and individual towers to provide terminal isolation. Weatherpack connectors are ideally suited for critical applications that require protection from environmental hazards. Package quantity: 3 MCXFA1154 Block connector 2 way Block connector 3 way An environmentally sealed connection system that utilises silicone rubber seals and individual towers to provide terminal isolation. Weatherpack connectors are ideally suited for critical applications that require protection from environmental hazards. Package quantity: 3 MCXFA1155 An environmentally sealed connection system that utilises silicone rubber seals and individual towers to provide terminal isolation. Weatherpack connectors are ideally suited for critical applications that require protection from environmental hazards. Package quantity: 3 MCXFA1156 Block connector 4 way An environmentally sealed connection system that utilises silicone rubber seals and individual towers to provide terminal isolation. Weatherpack connectors are ideally suited for critical applications that require protection from environmental hazards. Package quantity: 3 MCXFA Connectors

21 Relays (Products available in JDPoint through TS programme B3) Relay 12V, 20A Relay 12V, 20/30A Relay, 12V, 20A. On/Off type, 4 Lucar terminals complete with mounting bracket. Package quantity: 3 MCXFA1139 Relay, 20/30A, 12V, changeover type, 5 lucar terminals complete with mounting bracket. Package quantity: 3 MCXFA1146 Relay 12V, 30/40A Relay 12V, 40A open Relay, 30/40A, 12V, changeover type, 5 lucar terminals optional mounting bracket. Package quantity: 3 MCXFA1147 Relay 40A,12V open type, 4 lucar terminals. Package quantity: 3 MCXFA1148 Relay 12V, 70A Relay socket Relay 70A, 12V open type, 4 lucar terminals. Package quantity: 3 MCXFA1149 Relay socket, suitable for use with relays up to 5 terminals. Complete with 5 crimp type female lucar terminals. Package quantity: 3 MCXFA1164 Relays 21

22 Switches & Warning lamps (Products available in JDPoint through TS programme B3) Warning light Green Warning light Amber Warning light Red Green panel warning lamp, 12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. MCXFA1140 Amber panel warning lamp.12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. MCXFA1144 Red panel warning lamp.12 Volt, 0.08 Amp, 1 Watt. Requires a 12.7mm mounting hole. Lucar connections. MCXFA1143 Rocker switch 20A Rocker switch 20A Heavy duty (On/Off) illuminated rocket switch with 3 terminals. 12 Volt 20 Amp. Fitted with 12 Volt bulb. Supplied with 4 colour discs and various symbols for universal applications. Requires 38.7x18.5mm mounting hole and for use with panels up to 3.8mm depth. Package quantity: 3 MCXFA1141 Heavy duty (On/Off) illuminated rocker switch with 4 terminals for use with relay. 12 Volt, 20 Amp. Fitted with 12 Volt bulb. Supplied with 4 colour discs and various symbols for universal applications. Requires 38.7x18.5mm mounting hole. Package quantity: 3 MCXFA1145 Switch ON/OFF Switch ON/ON Switch ON/OFF/ON Metal toggle switch 2 position on/off, 20mm bulkhead fitting 25A/12V Pack Content: 1 Pack Qty: 3 Metal toggle switch 2 position on/on, 20mm bulkhead fitting 25A/12V Pack Content: 1 Pack Qty: 3 Metal toggle switch 3 position on/off/on, 20mm bulkhead fitting 25A/12V Pack Content: 1 Pack Qty: 3 Part Number: MCXFA1839 Part Number: MCXFA1840 Part Number: MCXFA1841 Switch flash/off/flash Switch flash/off Switch ON/OFF LED Red Metal toggle switch 3 position flash/off/on, 20mm bulkhead fitting 25A/12V Pack Content: 1 Pack Qty: 3 Part Number: MCXFA1842 Metal toggle switch 2 position flash/off/on, 20mm bulkhead fitting 25A/12V Pack Content: 1 Pack Qty: 3 Part Number: MCXFA1843 Metal toggle switch 2 position on/off with red LED illumination 25A/12V Pack Content: 1 Pack Qty: 3 Part Number: MCXFA1845 Switch ON/OFF LED Green Switch ON/OFF LED Amber Switch cover Metal toggle switch 2 position on/off with green LED illumination 25A/12V Pack Content: 1 Pack Qty: 3 Metal toggle switch 2 position on/off with amber LED illumination 25A/12V Pack Content: 1 Pack Qty: 3 Screw on waterproof cover for metal toggle switches Pack Content: 1 Pack Qty: 3 Part Number: MCXFA1844 Part Number: MCXFA1846 Part Number: MCXFA Switches & Warning lamps

23 Plugs & Sockets (Products available in JDPoint through TS programme B3) Power socket 12/24V Power plug 12/24V Power socket suitable for use with 12V or 24V power plugs. Designed for dashboard or panel mounting. Complete with dust cover, 18mm locknut. Package quantity: 3 MCXFA1135 Power plug for use with MCXFA1135 type power socket. 12/24V. Package quantity: 3 MCXFA1136 Power plug cigarette lighter, fused Power plug, 3 pin Power plug with internal fuse. Suitable for use with standard cigarette lighterpower sockets. 12/24V. Maximum 10A. Package quantity: 3 MCXFA pin power plug for use with MCXFA1161 power plug. Package quantity: 3 MCXFA1160 Power socket, 3 pin 3 pin power socket with a two hole mounting flange (46mm centres). For use with MCXFA1160 plug. Requires 26mm mounting hole for body. Package quantity: 3 MCXFA1161 Horns (Products available in JDPoint through TS programme B3) Horn high tone Horn low tone Horn high tone, disc type, 12V, 4.5A, 112dB 335Hz +/-5%. Lucar connections and mounting bracket. MCXFA1150 Horn low tone, disc type, 12V, 4.5A, 112dB 335Hz +/-5%. Lucar connections and mounting bracket. MCXFA1151 Plugs & Sockets / Horns 23

24 Beacons (Products available in JDPoint through TS programme B3) IP Rating: Dust water Beacons must be able to operate reliably under tough conditions for many years. The IP code indicates under which ambient conditions the beacons will be operational. The abbreviation IP stands for Ingress Protection. The IP code consists of two digits. digit represents the degree of protection from various forms of moisture. The higher the number, the tighter the seal. FIRST DIGIT: PROTECTION AGAINST ACCIDENTAL CONTACT AND PENETRATION BY SOLID FOREIGN BODIES IP Dust 0 No special protection SECOND DIGIT: PROTECTION AGAINST PENETRATION OF LIQUIDS IP 0 Water 1 Protection against solid bodies over 50 mm and against contacts by large surfaces of the human body (e.g. the hands) 2 Protection against solid bodies over 12,5 mm and against 3 Protection against solid bodies over 2,5 mm (e.g. tools, wires) 4 Protection against penetration of solid bodies with a diameter or thickness over 1 mm (e.g. wires) 5 Dust penetration is not fully excluded, but the quantity that penetrates causes no damaging effects 6 No dust penetration is permitted 1 Protection against the vertical fall of drops of water (e.g. condensation) 2 Protection against the vertical fall of drops of water with a maximum incline of 15 3 Protection against the vertical fall of drops of water with a maximum incline of 60 4 Protection against splashes of water from all directions 5 Protection against jets of water from all directions 6 Protection against waves of water or powerful jets 7 7 Protection against the effects of immersion 8 8 Protection against the effects of prolonged immersion under pressure Flexi mount Beacon Multipack Display counterbox containing 9 pcs. MCXFA1571 MCXFA Beacons

25 Beacons (Products available in JDPoint through TS programme B3) Flexi mount Beacon Pole mount Beacon Bolt mount Beacon Voltage: 12V Absorption: 4,6 A Structure: Flexible rubber base, vibration-proof. Unbreakable polycarbonate dome screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Voltage: 12V Absorption: 4,6 A Structure: Fiberglass reinforced polypropylene base. PMMA dome screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Voltage: 12V Absorption: 4,6 A Structure: Fiberglass reinforced polypropylene base. PMMA dome screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Mounting: Standard ISO DIN A IP Degree: IP 54 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1571 Available also as 9 pcs Display box (MCXFA1591). See page 31 for details. Mounting: Standard ISO DIN A IP Degree: IP 54 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1573 Mounting: Standard ISO DIN b1 with 3 bolts IP Degree: IP 54 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1575 Magnetic base Beacon Compact Flexi globe beacon Voltage: 12V Absorption: 4,6 A Structure: Fiberglass reinforced polypropylene base. PMMA dome screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Voltage: 12V Absorption: 2,9 A Structure: Flexible rubber base, vibration-proof. Unbreakable polycarbonate dome screw mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Voltage: 12V Absorption: 4,6 A Structure: Flexible rubber base, vibration-proof. Unbreakable polycarbonate dome clamp mount. Worm gear drive. Sintered bush bearing. Anodized aluminum reflector with stepped device for manual rotation. Radio interference filter integrated in the motor. Mounting: with 2 magnets, self coiling lead and cigarette lighter plug IP Degree: IP 54 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1570 Mounting: Standard ISO DIN A IP Degree: IP 54 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1572 Mounting: Standard ISO DIN A IP Degree: IP 66 Rotation per minute: 160 ± 30 r.p.m. Approval: According to REG 65 ECE ONU with the number A1 E EMC appr.: 2006/28/CE e MCXFA1574 Beacons 25

26 Beacons (Products available in JDPoint through TS programme B3) Crystal LED Amber Rotating pole mounted DIN A 8 LED rotating, pole mounted DIN A MCXFA1594 Crystal LED Amber Flashing pole mounted DIN A 8 MCXFA1592 Crystal LED Amber Rotating with Magnetic base 8 LED rotating, magnetic base MCXFA1595 Crystal LED Amber Flashing with Magnetic base 8 MCXFA1593 TECHNICAL SPECIFICATIONS ROTATING LED AMBER DIN A and Magnetic FLASHING 8X LED AMBER DIN A and Magnetic PART NUMBERS 8 LED rotating, pole mounted DIN A MCXFA LED rotating, magnetic base: MCXFA1595 OPERATING POWER SUPPLY VDC VDC Voltage MAX Voltage MAX AVG MAX CURRENT ABSORPTION 12 Vdc 0.88 A 12 Vdc 1.7 A 0.7 A 24 Vdc 0.43 A 24 Vdc 0.8 A O.35 A ROTATION PER MINUTE 130 ± 10 R.P.M. Magnetic base (AL) with high adherence Neodymium magnet DIN A base (AL + PA 6.6) screw mount with nut AVAILABLE BASES STRUCTURE External self-cleaning dome PC (Polycarbonate) Timer electronic circuit realized with micro-processor for rotating effect according to R65. to R65. TECHNICAL CHARACTERISTICS OF Protection block against polarity inversion. Protection block against polarity inversion. THE ELECTRONIC CIRCUIT NB: all electronic components used for the a.m. circuit blocks conform to par. 5.1 of NB: all electronic components used for the a.m. circuit blocks conform to par. 5.1 of regulation n 65 (ECE-ONU) regulation n 65 (ECE-ONU) OPERATING TEMPERATURE RANGE -30 C + 50 C Approved according to REG 65 ECE-ONU with number: TA1 E Approved according to REG 65 ECE-ONU with number: TA1 E Measurement degrees Limits Reg.65 (AMBER) Measurement degrees Limits Reg.65 (AMBER) LIGHT OUTPUT MAX 0 MAX 0 MIN MIN MIN MIN MIN 8 70 MIN 8 70 OPTICAL GROUP DOME COLORIMETRY Amber Polycarbonate X = Y = IP PROTECTION DEGREE Beacons

27 Beacons (Products available in JDPoint through TS programme B3) Beacon Pole bracket-2 bolt stepped base Adapter socket with base for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1585 Beacon Wall mount threaded adapter socket, zamac nut for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1579 Beacon Pole bracket-3 bolt circular base Adapter socket with round base for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1584 Beacon Pole bracket- 2 bolt rotatable mount for sloping cabs Tilted directional support for cabins for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1580 Beacon Wall mount adapter socket with round base for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1577 Beacon Pole bracket- 2 bolt rotatable mount Upright directional support for cabins for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1581 Beacon Wall mount adapter socket with round base for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1578 Beacon pole bracket weld-on Adapter socket to be welded for beacons with ISO DIN A mounting Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1582 Beacon mounting pole adjustable with locking nuts Threaded adapter socket, zamac nut for beacons with ISO DIN A mounting. Structure: White zinc-plated steel with internal brass socket. EPDM black cap MCXFA1586 Beacon construction Adapter socket on a 90 mounting bracket with ISO DIN A mounting Structure: White zinc-plated steel, slotted holes and internal brass socket. EPDM black cap MCXFA1583 Beacons 27

28 Beacons (Products available in JDPoint through TS programme B3) Beacon pole extension with Q/R handle Rigid extension arm for ISO DIN A mounting beacons Structure: White zinc-plated steel with internal brass socket. EPDM black cap Length: 500mm MCXFA1576 Replacement Polycarbonate Amber lens for MCXFA1570, 1571 & 1573 Beacons Spare dome for MCXFA1570, 1571 & 1573 Structure: Polycarbonate PC MCXFA1588 Replacement Amber lens for MCXFA1572 Beacon Spare dome for MCXFA1572 Structure: Polycarbonate PC MCXFA Beacons

29 Trailer Lighting (Products available in JDPoint through TS programme B3) Marker lamp Marker lamp Rubber body front and rear marker lamp. 12V. Red and clear lenses. Complete with bulb. 50mm dia. 70mm bolt centres. Replacement bulb: MCXFA1002. Package quantity: 3 MCXFA1230 Rubber body stalk type marker lamp. Red and clear lenses. 70mm x 30mm bolt centres 4 bolt fixing. Replacement bulb: MCXFA1002. Package quantity: 3 MCXFA1231 Trailer light board Trailer light board Trailer light board. White PVC 1215 x 139mm. 12V. 4 function rear lights. Complete with bulbs, reflectors and 7m of cable fitted with 7 pin plug. Uses replacement MCXFA1235 light unit & MCXFA1237 lens. MCXFA1232 White PVC 1350 x 139mm. 12V, 4 function rear lights. Complete with triangular reflectors and 12m of cable fitted with 7 pin plug. Use replacement MCXFA1235 light unit & MCXFA1237 lens. MCXFA1233 Trailer light board Trailer light set, 12V, 2 piece. Fitted with 4 function lights and triangular reflectors. 6m trailer cable with 7 pin plug. 2m of coiled cable connects the 2 light units. 95mm x 95mm. Use replacement light unit MCXFA1235 MCXFA1234 Rear lamp Rear light unit, 12V, stop / tail and indicator, with side (number plate) illumination window. Complete with bulbs. 105 x 100 x 50mm. Use MCXFA1238 replacement lens. Package quantity: 3 MCXFA1236 Rear lamp Light lens Rear light unit, 12V, stop/tail and indicator, with side (number plate) illumination window. Replacement unit for MCXFA x 97 x 47mm Package quantity: 3 MCXFA1235 Replacement lens for light units fitted to MCXFA1232/34 lighting board. 97 x 97mm. Package quantity: 3 MCXFA1237 Light lens Replacement lens for MCXFA mm x 100mm. Package quantity: 3 MCXFA1238 Pair of 135mm red rear trailer reflectors. Complete with white protective surround, total height 160mm. 2 x 5.8mm diameter mounting holes, 70mm apart. Also suitable for use with trailer lighting boards. Pack contents: 2 MCXFA1239 Trailer Lighting 29

30 Trailer Lighting (Products available in JDPoint through TS programme B3) Trailer light kit 7.5m Magnetic trailer light kit 7m Trailer light set, 12V, 4 function, rear trailer lights with 2.5m of cable between them and 7.5m of cable fitted with a 7 pin plug. Supplied in a handy storage case. MCXFA1240 Trailer light set, 12V, magnetic mounting, 4 function rear trailer lights with 2.5m of cable between them and 7m of cable fitted with a 7 pin plug. Supplied in a handy storage case. MCXFA1241 Magnetic trailer light kit 12m Trailer light set, 12V, magnetic mounting, 4 function rear trailer lights with 4m of cable between them and 12m of cable fitted with a 7 pin plug. Supplied in a handy storage case. MCXFA1242 Trailer light set, 12V, pre-wired rear lights and rear fog lamp with reflectors, magnetic mounting. 4m of cable between lamps and 12m of 7 core cable to 7 pin plug. Supplied in a handy storage case. MCXFA1243 Magnetic marker light kit Trailer marker light set, Front/rear pre-wired, 12V, complete with front/rear lights, 2.5m cable between lamps and 7.5m of 5 core cable to 7 pin plug. Complete with triangular trailer reflectors. Magnetic attachment for flexibility. Supplied in a handy storage case. MCXFA1244 Trailer electrical extension cable, 3m, 2 x 7 pin plugs Plain 3m lighting cable that comes with two pre-wired 7 pin plugs. Suitable for trailers with removable cables. MCXFA1253 Coiled connecting cable, 2 x 7 pin plugs Coiled 3m cable with two pre-wired 7 pin plugs. MCXFA Trailer Lighting

31 Trailer Plugs & Sockets (Products available in JDPoint through TS programme B3) Plastic 7 pin plug & socket Plastic 7 pin plug High impact moulded plastic 7 pin trailer plug and socket set. Supplied complete with mounting screws and rubber gasket. MCXFA1245 High impact moulded plastic 7 pin plug. MCXFA1246 Plastic 7 pin socket Metal 7 pin plug & socket High impact moulded plastic 7 pin socket. Supplied complete with mounting screws and rubber gasket. MCXFA1247 Die cast metal alloy 7 pin trailer plug and socket set. Supplied complete with mounting screws and rubber gasket. MCXFA1248 Metal 7 pin plug Metal 7 pin socket Die cast metal alloy 7 pin trailer plug. MCXFA1249 Die cast metal alloy 7 pin trailer socket. Supplied complete with mounting screws and rubber gasket. MCXFA1250 Trailing 7 pin socket Plastic 13 pin plug Trailing socket for 7 pin extension cables. Package quantity: 3 MCXFA1252 Trailer plug 12V, 13 pin. More recently found on towbar electric systems, the 13 pin plug can combine 7 pin black 12N lighting and grey 12S supplemental power plugs. Benefits include waterproof when connected, connections are electro-plated helping corrosion resistance, coupled by a positive twist lock and each pin can carry up to 25 Amps. Package quantity: 3 MCXFA1256 Trailer Plugs & Sockets 31

32 Trailer Plugs & Sockets (Products available in JDPoint through TS programme B3) Plastic 13 pin socket Adaptor plug 13 to 7 pin Plastic trailer socket, 12V, 13 pin, with gasket and fixing screws. More recently found on towbar electrics, the 13 pin socket can combine black 12N lighting socket and grey 12S supplemental power sockets. Benefits include: waterproof when connected, connections are electro-plated helping corrosion resistance, coupled by a positive twist lock and each pin can carry up to 25 Amps. Package quantity: 3 MCXFA1257 Conversion adaptor 13 pin vehicle to 7 pin trailer. European vehicles are more commonly being fitted with 13 pin sockets. This adaptor enables conversion between new vehicles and trailers with a 7 pin plug that may still be required when used behind other older vehicles. Package quantity: 3 MCXFA1258 Adaptor plug 7 to 13 pin Conversion adaptor, 7 pin vehicle to 13 pin trailer. This adaptor enables connection between new trailers supplied with a 13 pin plug and older vehicles with 7 pin sockets. Package quantity: 3 MCXFA pin socket mounting plate Twin mounting holes Ø16.5mm x 85mm hole spacing, black finish. Suitable for use with towing balls and 7 pin sockets. Pack contents 1 Pack quantity 1 MCXFA Trailer Plugs & Sockets

33 33

34 Battery accessories 34 Battery accessories

35 Battery accessories (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Crocodile clips 5A Crocodile clips 25A (2) Crocodile cable clips - 5 Amp rating Pack contents: 2 MCXFA1187 Crocodile cable clips 25 Amp rating. Pack contents: 2 MCXFA1188 Crocodile clips 50A (2) Battery terminal +ve 8mm Crocodile cable clips 50 Amp rating. Pack contents: 2 MCXFA1189 Positive battery terminal for 8mm diameter battery cable. Solderless design with double clamping screws. MCXFA1190 Battery terminal -ve 8mm Battery terminal HD +ve 10mm Negative battery terminal for 8mm diameter cable. Solderless design with double clamping screws. MCXFA1191 Positive heavy duty battery terminal, 10mm cable diameter. Solderless design with double clamping screws. MCXFA1192 Battery terminal HD -ve 10mm Negative heavy duty battery terminal, 10mm cable diameter. Solderless design with double clamping screws. MCXFA1193 Battery terminals +/- 8mm Battery terminals, pair, positive/negative, 8mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 MCXFA1196 Battery terminals +/- HD 10mm HD battery terminals, pair, positive/negative, 10mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 MCXFA1197 Battery terminal XHD +ve 14.3mm Extra heavy duty battery terminal. Positive. 14.3mm cable diameter. Solderless design with double clamping screws. MCXFA1198 Battery accessories 35

36 Battery accessories (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Battery terminal XHD -ve 14.3mm Extra heavy duty battery terminal. Negative. 14.3mm cable diameter. Solderless design with double clamping screws. MCXFA1199 Battery terminals +/- XHD 14.3mm Extra heavy duty battery terminals. Positive/Negative. 14.3mm cable diameter. Solderless design with double clamping screws. Pack contents: 2 MCXFA1200 Battery terminal double clamp +ve Positive double clamp terminal suitable for up to 10mm diameter cable MCXFA1600 Battery terminal double clamp -ve Negative double clamp terminal suitable for up to 10mm diameter cable MCXFA1601 Battery terminal +ve Battery terminal -ve Positive-90 double clamp terminal suitable for cable diameter up to 12.5mm Pack Content: 1 Pack Qty: 5 Negative-90 double clamp terminal suitable for cable diameter up to 12.5mm Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1602 Part Number: MCXFA1603 Battery terminal 8mm bolt +ve Positive battery terminal with single 8mm bolt fixing MCXFA1606 Battery terminal 8mm bolt -ve Negative battery terminal with single 8mm bolt fixing MCXFA1607 Battery terminal +ve Battery terminal -ve Positive battery terminal with single 8mm stud fixing Pack Content: 1 Pack Qty: 5 Negative battery terminal with single 8mm stud fixing Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1604 Part Number: MCXFA Battery accessories

37 Battery accessories (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Battery terminal +ve Battery terminal -ve Postive battery terminal with 10mm bolt fixing Pack Content: 1 Pack Qty: 5 Negative battery terminal with 10mm bolt fixing Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1647 Part Number: MCXFA1648 Battery terminal 9mm cable +ve Positive battery terminal with side clamp suitable for 9mm diameter cable MCXFA1608 Battery terminal 9mm cable -ve Negative battery terminal with side clamp suitable for 9mm diameter cable MCXFA1609 Battery terminal 14.3mm cable +ve Positive battery terminal with side clamp suitable for 14.3mm diameter cable MCXFA1614 Battery terminal 14.3mm cable -ve Negative battery terminal with side clamp suitable for 14.3mm diameter cable MCXFA1615 Battery terminal 15mm cable +ve Positive battery terminal with side clamp suitable for 15mm diameter cable MCXFA1616 Battery terminal 15mm cable -ve Negative battery terminal with side clamp suitable for 15mm diameter cable MCXFA1617 Battery terminal RH single clamp +ve Positive battery terminal with a right hand offset and single clamp, suitable for up to 12mm diameter cable. MCXFA1618 Battery terminal RH single clamp -ve Negative battery terminal with a right hand offset and single clamp, suitable for up to 12mm diameter cable. MCXFA1619 Battery accessories 37

38 Battery accessories (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Battery terminal LH single clamp +ve Positive battery terminal with a left hand offset and single clamp, suitable for up to 12mm diameter cable. MCXFA1645 Battery terminal LH single clamp -ve Negative battery terminal with a left hand offset and single clamp, suitable for up to 12mm diameter cable. MCXFA1646 Battery terminals, quick release, insulated +/- 8mm Battery eyelet 10mm Battery terminals, pair, insulated quick release type, +ve/-ve. Suitable for up to 8mm diameter cable. Solderless clamp design. Ideal for applications where easy removal of power supply is required, for example: electric fencer units. Pack contents: 2 Heavy duty 10mm eyelet suitable for battery and welding cable up to 9mm in diameter with double screw clamping Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1610 MCXFA1201 Battery eyelet 12mm Battery eyelet 8mm Heavy duty 12mm eyelet suitable for battery and welding cable up to 10mm in diameter with double screw clamping Pack Content: 1 Pack Qty: 5 Heavy duty 8mm eyelet suitable for battery and welding cable up to 8mm in diameter with double screw clamping Pack Content: 1 Pack Qty: 5 Part Number: MCXFA1611 Part Number: MCXFA1612 Battery eyelet 10.5mm Battery eyelet 13mm Battery eyelets, pair. Bolt hole 10.5mm, cable diameter 9.4mm, cross section 27 42mm 2. Crimp or solder to cable. Pack contents: 2 Battery eyelets, pair. Bolt hole 13mm, cable diameter 11.4mm, cross section 42 60mm 2. Crimp or solder to cable. Pack contents: 2 MCXFA1204 MCXFA1205 Battery isolator switch 12/24V Maximum capacity 12 Volt at 1000 Amps for 10 seconds, 24 Volt at 500 Amps for 10 seconds. Supplied with two keys MCXFA1210 Battery isolator switch 12/24V Heavy duty 12/24 Volt, 250 Amp, TIR specification isolator switch with removable key. Maximum Current: 2500 Amp for 5 sec. MCXFA Battery accessories

39 Battery accessories (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Earth strap 150mm Earth strap 300mm Braided battery earth strap, heavy duty design with battery terminal and eyelet ends. 150mm long Package quantity: 3 MCXFA1212 Braided battery earth strap, heavy duty design with battery terminal and eyelet ends. 300mm long Package quantity: 3 MCXFA1213 Earth strap 450mm Earth strap 600mm Braided battery earth strap, heavy duty design with battery terminal and eyelet ends. 450mm long Package quantity: 3 MCXFA1214 Braided battery earth strap, heavy duty design with battery terminal and eyelet ends. 600mm long Package quantity: 3 MCXFA1215 Earth strap 300mm ring/ring Braided battery earth strap, heavy duty design with eyelet ends. 300mm long Package quantity: 3 MCXFA1216 Earth strap 450mm ring/ring Braided battery earth strap, heavy duty design with eyelet ends. 450mm long Package quantity: 3 MCXFA1217 Battery hydrometer Pipette type, easy to use battery cell hydrometer. Can be easily dismantled for cleaning. Packaged in blister with simple operator instructions on reverse. Package quantity: 3 MCXFA1186 Battery accessories 39

40 Battery Maintenance Chargers (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Charge, maintain, recover and extend the life of your vehicle s battery. John Deere has introduced a range of fully automatic micro processor maintenance Chargers to cover most machine types with lead acid batteries. From 0.8 Amp connect and forget models to 90 Amp with selectable charge rates and start/ boost facility, are available. Suitable for all types of lead acid batteries; standard lead-acid, calcium, AGM, start-stop and gel cell. Battery maintenance charger 0.8A 3 pin UK plug A connect and forget peace of mind solution for out of season use. Developed for the charging and maintenance of smaller capacity batteries up to 32Ah especially ATV s, ride on mowers, motorcycles and jet skis. It will however provide maintainance charge for larger batteries up to 100Ah. Fully Automatic, Multi-stage charging cycle, Easy to read LED monitor, Spark proof and reverse polarity protection Supplied with quick connect eyelet cable and battery clamp cable Optional battery condition indicator available MCXFA1656 MCXFA1650 Battery maintenance charger 0.8A 2 pin Euro plug A connect and forget peace of mind solution for out of season use. Developed for the charging and maintenance of smaller capacity batteries up to 32Ah especially ATV s, ride on mowers, motorcycles and jet skis. It will however maintain charged larger batteries up to 100Ah. Fully Automatic Multi-stage charging cycle Easy to read LED monitor Spark proof and reverse polarity protection Supplied with quick connect eyelet cable and battery clamp cable MCXFA1653 Battery condition indicator The LED trafic light system on the battery condition indicator allows quick and easy access to the status of your battery. Easily connected to the battery using 6.4mm eyelets, the 0.55m of 10A cable gives enough length for quick connect and disconnect. suitable for use with MCXFA1650 and MCXFA1653 battery maintainers MCXFA1656 Battery maintenance charger 10A 2 pin Euro plug A fully automatic maintenance charger with 6 and 12Volt detection, 3 rates of charge and microprocessor controlled for maximum performance. Suited to fast charge medium size batteries from CCA and maintain charged units over 550CCA and deep cycle batteries. LED display allows easy monitoring of battery status or selection of individual rates of charge. Fully Automatic Auto Voltage detection 6-12V 2A-6A-10A charging rates battery size dependant Multi-stage charging cycle Easy to read LED monitor Spark proof and reverse polarity protection MCXFA1654 Battery maintenance charger 10A 3 pin UK plug A fully automatic maintenance charger with 6 and 12Volt detection, 3 rates of charge and microprocessor controlled for maximum performance. Suited to fast charge medium size batteries from CCA and maintain charged units over 550CCA and deep cycle batteries. LED display allows easy monitoring of battery status or selection of individual rates of charge. Fully Automatic Auto Voltage detection 6-12V 2A-6A-10A charging rates - battery size dependant Multi-stage charging cycle Easy to read LED monitor Spark proof and reverse polarity protection MCXFA Booster cables

41 Battery Maintenance Chargers / Booster cables (Products available in JDPoint through TS programme B3) The complete range of Batteries can be found on pg Battery maintenance charger 90A 3 pin UK plug A fully automatic maintenance charger with boost start facility. This unit provides 6 and 12Volt detection, 3 rates of charge and is microprocessor controlled for maximum performance. Digital and LED display allow easy monitoring of battery status or selection of individual rates of charge. Fully Automatic Auto Voltage detection 6-12V 3A-5A-20A charging rates battery size dependent 150A Engine boost start Multi-stage charging cycle Easy to read LED/Digital monitor Spark proof and reverse polarity protection MCXFA1652 Battery maintenance charger 90A 2 pin Euro plug A fully automatic maintenance charger with boost start facility. This unit provides 6 and 12Volt detection, 3 rates of charge and is microprocessor controlled for maximum performance. Digital and LED display allow easy monitoring of battery status or selection of individual rates of charge. Fully Automatic Auto Voltage detection 6-12V 3A-5A-20A charging rates battery size dependent 150A Engine boost start Multi-stage charging cycle Easy to read LED/Digital monitor Spark proof and reverse polarity protection MCXFA1655 Booster cable clip set 400A Battery booster clamps 600A Booster cable clips, pair, rated at 400 Amps for 35% of the duty cycle. Pack contents 2 MCXFA1206 Pair of heavy duty angled battery clamps suitable for cable diameter up to 10.5mm Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1657 Booster cable set 600A 3.5m Heavy duty booster cable set, 3,5m long, semi insulated clips. 600A, 25mm² cable MCXFA1207 Booster cable set 600A 5m Heavy duty booster cable set, 5m long, semi insulated clips. 600A, 25mm² cable MCXFA1208 Booster cable extra heavy duty 600A 5m Extra heavy duty booster cable set, 5m long, fully insulated clips. 600A, 50mm² cable MCXFA1209 Booster cable extra heavy duty 600A 5m Extra heavy duty booster cable set, 5m long, fully insulated clips. Complete with suppressor to provide protection for sensitive electronic components when boost starting. 600A, 50mm² cable MCXFA1255 Booster cables 41

42 Heavy Duty Camera Systems Kits and Single components for John Deere machines For tractor models 6R, 7R, 8R, and 9R as well as for Combines and Forage Harvesters, John Deere offers customised, easy to install, modular camera kits. Each kit includes a camera and an extension cable as well as a connection or adapter cable. The kits are compatible with the John Deere terminals GS3 CommandCenter Touch and GS Display. Several kits may be necessary depending on the requirement and on the tractor/trailer combination. Typical applications are described on the following pages, also listing the required kits and components. The system components are available as kits and as separate 42 Heavy Duty Camera Systems

43 Heavy Duty Camera Systems (Products available in JDPoint through TS programme B3) John Deere Heavy Duty Camera Systems let you observe your daily work better and enable you to Reliable transport and operation. With CCTV Video Camera systems cameras you have time to see bystanders and objects. Maximum yield. Unloading auger, towed vehicle, bale ejection you can selectively monitor work processes in and on the vehicle. Less stress behind the controls. Whether ploughing, spraying, sowing, fertilising or harvesting you can look forward and still see everything without straining. A camera to monitor operations behind the cab makes your job easier, contributing to a healthy working posture and improved productivity. John Deere offers complete Camera sets which, in combination with the GreenStar GS Display, provide a universal solution for The Camera (MC ) The camera features CMOS technology and an automatic brightness adjustment to deliver sharp, high contrast images under back light and rapidly changing light conditions. The rugged die-cast aluminium housing protects the camera against adverse weather conditions and the camera s high shock and vibration resistance allow use under extremely tough conditions. 100% dustproof and waterproof Withstand high pressure washer applications with no need to dismount the camera before cleaning the equipment. Extension Cables Extension cables are available in three different lengths to ensure versatility for different applications. Available external extension cables: 5m (MC ) 12m (MC ) 16m (MC ) Adapter and Connection Cables designed to connect the camera either to the John Deere GS3 CommandCenter Touch terminals of 7R, 8R, 9R series tractors and combines or to the John Deere GS display. Heavy Duty Camera Systems 43

44 Camera kits for 6R Series Tractors (Products available in JDPoint through TS programme B3) The camera sets include a board net camera and an extension cable which is available in 5, 12, or 16 metre lengths. The extension cable is directly connected to the factory installed interface cable of the GS3 CommandCenter Touch of the 6R series tractor. GS3 CommandCenter Touch Quantity Part Number 1 MC6000KIT501 Components 1 Board net CMOS camera (MC ) 1 Extension cable 5 metres (MC ) GS3 CommandCenter Touch Quantity Part Number 1 MC6000KIT121 Components 1 Board net CMOS camera (MC ) 1 Extension cable 12 metres (MC ) GS3 CommandCenter Touch The GS Display has been designed to connect up to three cameras. The terminal connection cable is installed inside the cab, while the connections for the extension cable are located outside the cab. GS Display Quantity Part Number Components 1 MC6000KIT501 1 Board net CMOS camera (MC ) 1 Extension cable 5 metres (MC ) 1 MC2630KIT162 2 Board net CMOS camera (MC ) 2 Extension cable 16 metres (MC ) 1 Connection cable 3,3 metres (MC ) 1 MC Board net CMOS camera 1 MC Extension cable 16 metres NOTE: If the 6R has no Camera preparation, the following additional parts are required: Description WIRING HARNESS, CSM AND SDU, W/ VIDEO PREPARATION / it4-6r WIRING HARNESS, ADAPTER, REAR CAMERA / it4 6R SCREW, MACHINE TYCO CPC SEALING CAP SZ 13 PLSTC 6R without Camera preparation 1x AL x AL x 21H1442 1x 57M Camera kits for 6R Series Tractors

45 Camera kits for 7R, 8R, 9R Series Tractors (Products available in JDPoint through TS programme B3) The camera sets include a board net camera, an extension cable (available in 5, 12, or 16 metre lengths) and an adapter cable to connect the extension cable to the factory installed interface cable of the GS3 CommandCenter Touch of the 7R, 8R and 9R series tractors. GS3 CommandCenter Touch Quantity Part Number 1 MC7890KIT501 Components 1 Board net CMOS camera (MC ) 1 Extension cable 5 metres (MC ) 1 Adapter cable 0,3 metres (MC ) GS3 CommandCenter Touch Quantity Part Number 1 MC7890KIT161 Components 1 Board net CMOS camera (MC ) 1 Extension cable 16 metres (MC ) 1 Adapter cable 0.3 metres (MC ) GS3 CommandCenter Touch GS Display Quantity Part Number 1 MC789KIT501 1 MC2630KIT161 Components 1 Board net CMOS camera (MC ) 1 Extension cable 5 metres (MC ) 1 Adapter cable 0.3 metres (MC ) 1 Board net CMOS camera (MC ) 1 Extension cable 16 metres (MC ) 1 Connection cable 3.3 metres (MC ) Camera kits for 7R, 8R, 9R Series Tractors 45

46 Camera kits for Combines and Self Propelled Forage Harvesters (Products available in JDPoint through TS programme B3) The GS Display has been designed to connect up to three cameras. The terminal connection cable is installed inside the cab, while the connections for the extension cable are located outside the cab. GS3 CommandCenter Touch Quantity Part Number 1 MC7890KIT161 Components 1 Board net CMOS camera (MC ) 1 Extension cable 16 metres (MC ) 1 Adapter cable 0.3 metres (MC ) GS3 CommandCenter Touch Quantity Part Number 2 MC7890KIT161 Components 1 Board net CMOS camera (MC ) 1 Extension cable 16 metres (MC ) 1 Adapter cable 0,3 metres (MC ) GS Display GS Display Quantity Part Number Components 1 MC2630KIT161 1 Board net CMOS camera (MC ) 1 Extension cable 16 metres (MC ) 1 Connection cable 3.3 metres (MC ) 1 MC Board net CMOS cameras 1 MC Extension cable 12 metres 46 Camera kits for Combines and Self Propelled Forage Harvesters

47 Overview John Deere Camera Kits (Products available in JDPoint through TS programme B3) application. Part number Camera MC Extension Cable 5 m MC Extension Cable 12 m MC Extension Cable 16 m MC Adapter cable 0,3 m MC Connection cable 3,3 m MC Model Series MC6000KIT R MC6000KIT R MC6000KIT R MC7890KIT R, 8R, 9R, S, T, W MC7890KIT R, 8R, 9R, S, T, W MC7890KIT R, 8R, 9R, S, T, W MC2630KIT R, 7R, 8R, 9R, S, T, W, SPFH 7000 MC2630KIT R, 7R, 8R, 9R, S, T, W, SPFH 7000 MC2630KIT R, 7R, 8R, 9R, S, T, W, SPFH 7000 MC2630KIT R, 7R, 8R, 9R, S, T, W, SPFH 7000 Overview John Deere Camera Kits 47

48 Universal Heavy Duty Camera Systems (Products available in JDPoint through TS programme B3) No matter what Agricultural operation you need to perform and no matter what machinery and attachment you use, with the Quantity Part Number 1 MC3071KIT501 Components 1 TFT-Monitor 7" (MC ) 1 System cable 5 metres (MC ) 1 Board net CMOS camera (MC ) 1 MC Tractor cable 5m 1 MC6000KIT121 1 Extension cable 12 metres (MC ) 1 Board net CMOS camera (MC ) Quantity Part Number Components 1 MC3071KIT152 1 TFT-Monitor 7" (MC ) 2 System cables 15 metres (MC ) 2 Board net CMOS cameras (MC ) Optional: 2 Extension cable 20m (MC ) Quantity Part Number 1 MC3071KIT151 Components 1 TFT-Monitor 7" (MC ) 1 System cable 15 metres (MC ) 1 Board net CMOS camera (MC ) 1 MC Radio transmitter Tractor: 1 TFT-Monitor 5,6" (MC ) 1 Radio receiver (MC ) 48 Universal Heavy Duty Camera Systems

49 Cargo Handling (Products available in JDPoint through TS programme B3) Cargo Handling 49

50 Cargo Handling (Products available in JDPoint through TS programme B3) A range of soft grip handled ratchet tie downs to suit most applications. From light weight domestic to heavy duty commercial uses in a variety of sizes and pack quantities. Ratchet tie down 50mm x 5m Ratchet tie down suitable for heavy duty agricultural and industrial applications Width 50mm Length 5m Breaking force 5000kg MCXFA1272 Ratchet tie down 50mm x 10m Ratchet tie down suitable for heavy duty agricultural and industrial applications Width 50mm Length 10m Breaking force 5000kg MCXFA1279 Ratchet tie down 32mm x 5m Ratchet tie down 32mm x 5m Ratchet tie down 25mm x 5m Ratchet tie down suitable for medium duty agricultural and horticultural applications. Pack of 4 straps Width 32mm Length 5m Breaking force 2250kg MCXFA1273 Ratchet tie down suitable for medium duty agricultural and horticultural applications Width 32mm Length 5m Breaking force 2250kg MCXFA1275 Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. Pack of 2 straps width 25mm length 5m Breaking force 500kg MCXFA1277 Ratchet tie down 32mm x 5m Ratchet tie down 25mm x 5m Ratchet tie down 25mm x 5m Ratchet tie down suitable for medium duty agricultural and horticultural applications. Pack of 2 straps Width 32mm Length 5m Breaking force 2250kg MCXFA1274 Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. Pack of 4 straps Width 25mm length 5m Breaking force 500kg MCXFA1276 Ratchet tie down suitable for light duty agricultural, horticultural and domestic applications. width 25mm length 5m Breaking force 500kg MCXFA1278 Bungee strap assortment 10 pces A convenient pack of 10 assorted length elasticated bungee straps suitable for lighter duty retaining. Produced with soft grip metal hooks and manufactured to G.S TUV specification in a variety of lengths. All packed in a handy reuseable Zip bag. 2 x 450mm, 2 x 600mm, 2 x 800mm 2 x 1000mm, 2 x 1200mm MCXFA Cargo Handling

51 Bulk Fuel Filters with Water Separation (Products available in JDPoint through TS programme B3) Bulk Fuel Filters with Water Separation 51

52 Bulk Fuel Filters with Water Separation (Products available in JDPoint through TS programme B3) Fuel quality plays a vital role in a machine s performance and directly affects its associated down time caused by dirty fuel being transferred from bulk storage into your vehicles. Water block diesel filter assembly 70L /min Water block fuel filter for bulk storage tanks or transfer systems. Suitable for diesel or heating oil. Aluminium head with Spin-on canister Flow rate 70L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Head connection 1" BSP Filter thread 1" UNF MCXFA1710 Water block diesel filter 70L /min Replacement spin -on canister for MCXFA1710 assembly. Compatible with other manufacturers systems Flow rate 70L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Filter thread 1" UNF MCXFA1711 Water block diesel filter assembly 120L /min Water block fuel filter for bulk storage tanks or transfer systems, suitable for diesel or heating oil. Aluminium head with Spin -on canister Flow rate 120L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Head connection 1 1/4" BSP Filter thread 1 1/4" UNF MCXFA1713 Water block diesel filter 120L /min Replacement spin-on canister for MCXFA1713 assembly. Compatible with other manufacturer s systems Flow rate 120L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Filter thread 1 1/4" UNF MCXFA1712 Water block diesel filter assembly 150L /min Water block fuel filter for bulk storage tanks or transfer systems, suitable for diesel or heating oil. Aluminium head with Spin-on canister Flow rate 150L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Head connection 1 1/4" BSP Filter thread 1 1/2" UNF Pack Qty: 1 MCXFA1714 Water block diesel filter 150L /min Replacement spin-on canister for MCXFA1714 assembly. Compatible with other manufacturer s systems. Flow rate 150L/min Filter rate 10 Micron Pressure rating 12 bar (170 psi) Filter thread 1 1/2" UNF MCXFA Bulk Fuel Filters with Water Separation

53 Bulk Fuel Filters With Water Separation Adaptors and Fittings (Products available in JDPoint through TS programme B3) thread tape (MCXFA1170) is used on all adaptor threads when building a system. Adaptor fitting 1" x 1" BSPT Male x Male Galvanised steel fitting with hexagonal nut. Thread size 1" BSPT (Taper) Package quantity: 3 MCXFA1716 Hosetail fitting 1" x 1 1/4" BSPT Male Brass hose tail fitting suitable for 1" internal diameter fuel hose. With 1 1/4" BSPT (taper) thread. Package quantity: 3 MCXFA1719 Hosetail fitting 1" x 1" BSPT Male Brass hose tail fitting suitable for 1" internal diameter fuel hose. With 1" BSPT (Taper) thread. Package quantity: 3 MCXFA1718 Adaptor fitting 1" x 1" BSP Female x Female Galvanised tube fitting with 1" BSP internal thread. Package quantity: 3 MCXFA1721 Adaptor fitting 1" x 1" BSPT 60mm Male x Male Galvanised tube fitting with 1" BSPT (taper) external thread. Package quantity: 3 MCXFA1720 Adaptor elbow 90 1" x 1" BSP Female Galvanised 90 elbow fitting with 1" BSP internal thread. Package quantity: 3 MCXFA1725 Adaptor fitting 1" x 1" BSP Male x Female Zinc plated adaptor fitting with 1" BSP internal and external threads. Package quantity: 3 MCXFA1722 Reducer 1 1/4" x 1" BSPT/BSP Male x Female Galvanised steel reducer for filter housings. 1 1/4" BSPT (taper) external and 1" BSP internal thread. Package quantity: 3 MCXFA1717 Bulk Fuel Filters with Water Separation 53

54 Liquid Handling (Products available in JDPoint through TS programme B3) 54 Liquid Handling

55 Liquid Handling (Products available in JDPoint through TS programme B3) Funnel 1.7L Funnel 3L Heavy Duty Polypropelene construction in translucent white to enable clear view of media. Specially designed countoured funnel body enabling easier handling. 1.7L capacity Ø130mm pouring aperture with hinged lid Anti-splash rim and integral wire mesh filter Removable flexi spout 170mm long Package quantity: 3 MCXFA1702 Heavy Duty Polypropelene construction in translucent white to enable clear view of media. Specially designed countoured funnel body enabling easier handling. 3L capacity Ø170mm pouring aperture with hinged lid Anti-splash rim and integral wire mesh filter Removable flexi spout 245mm long. Drum bung connector for 205L barrel Package quantity: 3 MCXFA1703 Measuring jug 1L Measuring jug 2L High density translucent polyethylene construction for transferring metered quantities of liquids. 1L capacity (marked in Litres and Quarts) Removable flexi nozzle Screw lid to prevent dirt ingress MCXFA1705 High density translucent polyethylene construction for transferring metered quantities of liquids. 2L capacity (marked in Litres and Quarts) Removable flexi nozzle Screw lid to prevent dirt ingress Package quantity: 3 MCXFA1706 Measuring jug 5L High density translucent polyethylene construction for transferring metered quantities of liquids. 5L capacity Removable flexi nozzle Screw lid to prevent dirt ingress MCXFA1707 Fuel container 5L Green Durable 5ltr plastic fuel container, John Deere branded and coloured green for unleaded petrol. Twist-on, vented flexispout for smooth pouring. UN approved and complies with SI 1982/630 Pack Content: 1 Pack Qty: 4 Part Number: MCXFA1708 Fuel container 10L Black Durable 10ltr plastic fuel container, John Deere branded and coloured black for use with diesel fuel. Twist-on, vented flexispout for smooth pouring. UN approved and complies with SI 1982/630 Pack Content: 1 Pack Qty: 4 Part Number: MCXFA1709 Liquid Handling 55

56 Liquid Handling (Products available in JDPoint through TS programme B3) 12V Fuel transfer pump A self-priming pump with built in by-pass for diesel and light oil transfer. 40 litres per minute capacity. Supplied with 2m battery cable with heavy duty clips, 4m high quality delivery hose, brass fittings, metal auto-stop delivery nozzle and filter. On/off switch, base mounting plate and carrying handle. Requires 12 volt DC supply. Pack Content: 1 Pack Qty: 1 Part Number: MCXFA Liquid Handling

57 Hardware (Products available in JDPoint through TS programme B3) Hardware 57

58 Lynch Pins & Shaft Locking Pins (Products available in JDPoint through TS programme B3) 6mm x 42mm Pear ring Lynch pin pack 6mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA1085 6mm x x 42mm Round ring Lynch pin pack 6mm x 42mm Round ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA1086 8mm x 38mm Pear ring Lynch pin pack 8mm x 38mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA mm x 42mm Pear ring Lynch pin pack 8.8mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA mm x x 42mm Pear ring Lynch pin pack 11mm x 42mm Pear ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA mm x 44mm Round ring Lynch pin pack 11mm x 44mm Round ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA mm x 51mm Round ring Lynch pin pack 11mm x 51mm Round ring, supplied in a re-sealable clampack Pack contents: 5 MCXFA1083 6mm x 42mm Round ring Lynch pin 6mm x 42mm Round ring, supplied in a white plastic bucket 00 MCXFA1091 8mm x 38mm Pear ring Lynch pin 8mm x 38mm Pear ring, supplied in a white plastic bucket 00 MCXFA mm x 42mm Pear ring Lynch pin 9.4mm x 42mm Pear ring, supplied in a white plastic bucket 00 MCXFA mm x 42mm Pear ring Lynch pin 11mm x 42mm Pear ring, supplied in a white plastic bucket 00 MCXFA mm x 70mm Round ring Lynch pin 11mm x 70mm Round ring, supplied in a white plastic bucket Pack contents: 50 MCXFA1090 8mm x 42mm Round ring Linch pin 8mm x 42mm, Round ring, supplied in a white plastic bucket 00 MCXFA1463 9mm x 51mm Round ring Linch pin 9mm x 51mm, Round ring, supplied in a white plastic bucket 00 MCXFA1465 9mm x 44mm Round ring Linch pin 9mm x 44mm, Round ring, supplied in a white plastic bucket 00 MCXFA Lynch Pins & Shaft Locking Pins

59 Lynch Pins & Shaft Locking Pins (Products available in JDPoint through TS programme B3) 11mm x 51mm Round ring Lynch pin 11mm x 51mm Round ring, supplied in a white plastic bucket Pack contents: 50 MCXFA mm 6mm x 42mm 44mm Round round ring Lynch pin 11mm x 44mm Round ring, supplied in a white plastic bucket Pack contents: 50 MCXFA1461 6mm x 50mm Shaft locking pin Shaft locking pin 6mm x 50mm Pack contents: 2 Pack quantity: 5 MCXFA1393 8mm x 57mm Shaft locking pin Shaft locking pin 8mm x 57mm Pack contents: 2 Pack quantity: 5 MCXFA mm 11mm x 57mm 42mm Shaft Pear ring locking pin Shaft locking pin 9.5mm x 57mm Pack contents: 2 Pack quantity: 5 MCXFA mm x 89mm Shaft locking pin Shaft locking pin 11mm x 89mm Pack contents: 2 Pack quantity: 5 MCXFA mm x 53mm Quick hitch ball linch pin Quick hitch ball lynch pin 11mm x 53mm Pack contents: 2 Pack quantity: 5 MCXFA mm x 60mm Quick hitch ball linch pin Quick hitch ball lynch pin 15mm x 60mm Pack contents: 2 Pack quantity: 5 MCXFA1460 Pin and clip assortment 100 popular lynch pins and R clips, contained in a white plastic bucket. 10x2.5mm R clips(3/32) 20x3mm R clips(1/8") 20x4mm R clips(5/32") 10x5mm R clips(3/16") 10x6mm linch pins(1/4") 10x9mm linch pins (3/8") 20x11mm linch pins(7/16") MCXFA1098 Lynch Pins & Shaft Locking Pins 59

60 R Clips & Cotter Pins (Products available in JDPoint through TS programme B3) Assorted R clips 4mm x 75mm R clips Contains 150 R clips in a handy yellow stacking box, in the following sizes and approximate quantities: 5/64" x 1 5/16" x 30 5/64" x 1 9/16" x 25 3/32" x 1 3/32" x 42 7/64" x 1 5/8" x 25 9/64" x 1 3/4" x 20 5/32" x 2 15/16" x 8 Contents may vary. MCXFA1092 In re-sealable clam pack 0 MCXFA mm x 45mm R clips 5mm x 105mm R clips In re-sealable clam pack 0 Package quantity: 10 MCXFA1093 In re-sealable clam pack Pack contents: 5 MCXFA1097 3mm x 55mm R clips 6mm x 115mm R clips In re-sealable clam pack 0 Package quantity: 10 MCXFA1094 In re-sealable clam pack Pack contents: 5 MCXFA mm x 65mm R clips Cotter pin selection In re-sealable clam pack 0 MCXFA1095 In a handy yellow plastic stack pack Contains 555 pins in sizes: 1/16" x 1" x 150 3/32" x 1" x 150 3/32" x 1 1/2" x 100 1/8" x 1 1/4" x 75 1/8" x 2" x 50 5/32" x 2 1/2" x 30 Contents may vary. MCXFA1100 Cotter pin selection In a handy yellow plastic stack pack Contains 200 cotter pins in the larger sizes 1/8" x 1 1/2" x 50 5/32" x 2" x 50 3/16" x 2" x 50 1/4" x 3" x 30 5/16" x 3" x 20 Contents may vary. MCXFA R Clips & Cotter pins

61 Springs, Pins & Clips (Products available in JDPoint through TS programme B3) Assorted compression and expansion springs In a handy yellow plastic stack pack. Approximately 200 plated springs in a range of diameters, lengths and approximate quantities: Compression: 7/32" x 1" x 10 7/32" x 1 1/2" x 10 1/4" x 13/32" x 10 9/32" x 1/2" x 10 9/32" x 3/4" x 10 23/64" x 1 3/8" x 8 3/8" x 5/8" x 6 3/8" x 3/4" x 12 Expansion: 5/32" x 3 1/8" x 12 3/16" x 1 3/4" x 8 13/64" x 13/16" x 10 7/32" x 1" x 10 1/4" x 7/8" x 10 5/16" x 1 1/8" x 8 5/16" x 1 1/4" x 10 5/16" x 1 3/4" x 12 9/32" x 1 1/2" x 10 9/32" x 2" x 12 11/32" x 1 7/16" x 10 11/32" x 1 27/32" x 12 Contents may vary. MCXFA1102 Internal circlip assortment External circlip assortment Supplied in a handy yellow plastic box Kit comprising 300 internal circlips in the following sizes: 7/16" x 50 5/8" x 50 1/2" x 50 3/4" x 50 9/16" x 50 13/16" x 50 Contents may vary. MCXFA1111 Supplied in a handy yellow plastic box Kit comprising 300 external circlips in 18 sizes. 1/8" x 20 19/16" x 15 5/32" x 10 5/8" x 20 3/16" x 15 1/4" x 25 5/16" x 15 3/8" x 20 7/16" x 15 15/32" x 15 1/2" x 25 Contents may vary. MCXFA1112 3/4" x 25 13/16" x 15 7/8" x 20 1" x /16" x /8" x /4" x 5 Aluminium pop rivets In a handy yellow stack pack Contains 560 pieces. Aluminium blind rivets in the following sizes and approximate quantities: 1/8" x 5/16" x 100 1/8" x 1/2" x 80 MCXFA1117 3/16" x 1/2" x 55 3/16" x 3/4" x 30 3/16" x 1" x 10 5/32" x 1/2" x x 1/8" washers Contents may vary. Aluminium pop rivets 4 x 10mm Aluminium pop rivets 4 x 16mm Pop rivet fasteners 4mm diameter x 10mm length Pack Content: 50 Pack Qty: 5 Pop rivet fasteners 4mm diameter x 16mm length Pack Content: 50 Pack Qty: 5 Part Number: MCXFA1905 Part Number: MCXFA1906 Large flange aluminium pop rivets 4.8 x 12mm Large flange aluminium pop rivets 4.8 x 18mm Pop rivet fasteners with wide flange for increased hold 4.8mm diameter x 12mm length Pack Content: 50 Pack Qty: 5 Pop rivet fasteners with wide flange for increased hold 4.8mm diameter x 18mm length Pack Content: 50 Pack Qty: 5 Part Number: MCXFA1907 Part Number: MCXFA1908 Springs, Pins & Clips 61

62 Springs, Pins & Clips (Products available in JDPoint through TS programme B3) Metric roll pins Part Number Description Pack Content Pack Qty. MCXFA1900 MCXFA1901 MCXFA1902 MCXFA1903 MCXFA1904 DIN 1481 ISO 8752, metric tension pins 10mm diameter x 90mm length DIN 1481 ISO 8752, metric tension pins 10mm diameter x 120mm length DIN 1481 ISO 8752, metric tension pins 12mm diameter x 70mm length DIN 1481 ISO 8752, metric tension pins 12mm diameter x 90mm length DIN 1481 ISO 8752, metric tension pins 12mm diameter x 120mm length Metric roll pin pack DIN 1481 ISO 8752 Contains 375 metric rolled spring pins in sizes 1.5mm x 25mm x 100 6mm x 25mm x 50 3mm x 25mm x 75 6mm x 40mm x 10 3mm x 50mm x 30 8mm x 32mm x 10 5mm x 25mm x 25 8mm x 50mm x 40 5mm x 50mm x 25 10mm x 40mm x 10 Contents may vary. MCXFA1106 Imperial roll pin pack Metric roll pin pack DIN 1481 ISO 8752 Imperial selection pack of popular imperial tension pins. Contains 30 pins ranging from: 1/8" x 3/4" x 5 7/32" x 1 1/4" x 5 5/32" x1" x 5 1/4" x 1" x 5 3/16" x 1 1/2" x 5 5/16" x 2" x 5 Contents may vary. MCXFA1107 DIN 1481 ISO 8752 Selection pack of 48 popular metric tension pins. 3mm x 12mm x 5 6mm x 50mm x 5 4mm x 22mm x 5 8mm x 40mm x 5 4mm x 40mm x 5 8mm x 60mm x 5 5mm x 30mm x 5 10mm x 80mm x 5 6mm x 30mm x 5 Contents may vary. MCXFA1109 Metric roll pin pack Metric roll pin pack DIN 1481 ISO 8752 Selection pack of 195 popular metric tension pins 3mm x 12mm x 50 6mm x 30mm x 20 4mm x 22mm x 25 6mm x 50mm x 10 4mm x 40mm x 20 8mm x 40mm x 50 5mm x 30mm x 20 Contents may vary. MCXFA1108 DIN 1481 ISO 8752 Selection pack of 15 popular metric tension pins 8mm x 60mm x 5 10mm x 65mm x 5 10mm x 80mm x 5 Contents may vary. MCXFA Sealing & Lubrication

63 Sealing & Lubrication (Products available in JDPoint through TS programme B3) Injector washers In a handy yellow plastic stack pack Contains copper injector sealing washers in the following sizes and approximate quantities: 6mm x 10mm x 1mm x 20 10mm x 20mm x 2mm x 20 16mm x 20mm x 1.5mm x 15 8mm x 11mm x 1mm x 20 12mm x 16mm x 1.5mm x 20 17mm x 21mm x 1.5mm x 15 10mm x 13mm x 1mm x 20 10mm x 14mm x 1mm x 20 10mm x 20mm x 1mm x 20 MCXFA mm x 18mm x 1.5mm x 20 14mm x 18mm x 1.5mm x 15 14mm x 20mm x 1.5mm x 15 21mm x 25mm x 1mm x 15 22mm x 27mm x 1mm x 10 Contents may vary. Metric o ring assortment In a handy storage case Shore hardness 70 +/- 5, Contains approx 420 Metric O rings in 32 sizes 3mm x 1.5mm x mm x 2mm x 20 5mm x 2mm x 18 7mm x 1.5mm x 23 10mm x 1.5mm x 23 10mm x 2.5mm x 14 11mm x 2.5mm x 13 13mm x 1.5mm x 23 13mm x 2.5mm x 14 MCXFA mm x 2.5mm x 13 16mm x 2.5mm x 14 18mm x 2.5mm x 14 18mm x 3.5mm x 10 19mm x 2.5mm x 13 20mm x 3.5mm x 10 21mm x 2.5mm x 14 22mm x 2.5mm x 13 22mm x 3.5mm x mm x 3.5mm x 10 25mm x 3.5mm x mm x 3.5mm x 10 28mm x 3.5mm x 10 30mm x 3.5mm x 10 31mm x 3.5mm x 10 33mm x 3.5mm x mm x 3.5mm x 10 36mm x 3.5mm x 10 38mm x 3.5mm x 10 41mm x 3.5mm x 10 44mm x 3.5mm x 10 47mm x 3.5mm x 10 50mm x 3.5mm x 10 Contents may vary. Imperial o ring assortment In a handy storage case Shore hardness 70 +/- 5 Contains approx 420 Imperial O rings in 32 sizes 1/8" x 1/16" x 20 13/16" x 1/8" x 10 3/16" x 1/16" x 20 7/8" x 1/8" x 10 3/8" x 1/16" x /16" x 1/8" x 10 1/2" x 1/16" x /8" x 1/8" x 10 1/2" x 3/32" x /16" x 1/8" x 10 9/16" x 3/32" x /8" x 1/8" x 10 3/4" x 3/32" x /8" x 1/8" x 10 13/16" x 3/32" x /4" x 1/8" x 10 1/4" x 1/16" x 18 15/16" x 1/8" x 10 3/8" x 3/32" x /16" x 1/8" x 10 5/8" x 3/32" x /16" x 1/8" x 10 7/8" x 3/32" x /8" x 1/8" x 10 5/16" x 1/16" x 23 1" x 1/8" x 10 7/16" x 3/32" x /4" x 1/8" x 10 11/16" x 3/32" x /2" x 1/8" x 10 3/4" x 1/8" x 10 2" x 1/8" x 10 MCXFA1115 Contents may vary. Grease nipples metric In a handy yellow stack pack Metric selection pack comprising of an assortment of straight, 45 and 90 angle grease nipples in a sturdy plastic box, ideal for workshop and van use. 6mm x 30,6mm 45 x 15,6mm MCXFA x 15,10mm x x 15,10mm 90 x 15,10mm Contents may vary. 10 Sealing & Lubrication 63

64 Sealing & Lubrication (Products available in JDPoint through TS programme B3) Grease nipples mixed metric and imperial sizes In a handy yellow stack pack Imperial selection pack comprising of an assortment of 105 pieces straight, 45 and 90 angle grease nipples in a sturdy plastic box, ideal for workshop and van use. 1/4"- 28, x 30 1/4"- 28, 90 x 15 1/8" NPT, 45 x 15 1/4"- 28, 45 x 15 1/8" NPT, x 15 1/8" NPT, 90 x 15 Contents size and quantities may vary. MCXFA1119 Grease nipples mixed metric and imperial sizes In a handy yellow stack pack Selection pack comprising of an assortment of 110 straight, 45, 90 and 67.5 angle grease nipples in a sturdy plastic box, ideal for workshop and van use. M8 Straight x 20 M8 45 angle x 10 1/4BSP straight x 10 1/4UNF 67.5 angle x 5 M10 straight x 5 M10 45 angle x 5 1/4UNF straight x 30 1/8BSP 67.5 angle x 5 M6 90 angle x 10 1/4UNF x 19mm x 10 Contents may vary. MCXFA1120 Grease nipples metric In a re-sealable clam pack Metric selection pack comprising of an assortment of straight, 45º and 90º angle grease nipples in a clear plastic clam. M6 1.00mm straight x 1 M8 1.00mm straight x 1 M8 1.25mm straight x 1 M6 1.00mm 45 angle x 1 M8 1.00mm 45 angle x 1 M8 1.25mm 45 angle x 1 M6 1.00mm 90 angle x 1 M8 1.00mm 90 angle x 1 Contents may vary. Pack contents: 8 MCXFA1121 Grease nipples imperial In a re-sealable clam pack Imperial selection pack comprising of an assortment of straight, 45º and 90º angle grease nipples in a clear plastic clam. 1/8in BSP 67.5 angle x 1 1/4in UNF straight x 1 1/8in BSP straight x 1 1/8in BSP 45 angle x 1 5/16in UNF straight x 1 3/8in BSF straight x 1 1/4in BSF 67.5 angle x 1 1/4in UNF straight long x 1 1/8in BSP 90 angle x 1 Contents may vary. 0 MCXFA Sealing & Lubrication

65 Exhaust clamps (Products available in JDPoint through programme B3) A range of M8x1.25 threaded, weather proof, zinc plated exhaust clamps from 29 mm 102 mm (1 1/8" 4") to suit a many applications. Supplied with spring washers. Part Number Product Pack Content Pack Quantity Metric Imperial Thread MCXFA1620 Exhaust clamp 29mm (1 1/8") /8 M8 x 1.25 MCXFA1621 Exhaust clamp 32mm (1 1/4") /4 M8 x 1.25 MCXFA1622 Exhaust clamp 36mm (1 3/8") /8 M8 x 1.25 MCXFA1623 Exhaust clamp 38mm (1 1/2") /2 M8 x 1.25 MCXFA1624 Exhaust clamp 42mm (1 5/8") /8 M8 x 1.25 MCXFA1625 Exhaust clamp 43mm(1 11/16") /16 M8 x 1.25 MCXFA1626 Exhaust clamp 45mm (1 3/4") /4 M8 x 1.25 MCXFA1627 Exhaust clamp 48mm (1 7/8") /8 M8 x 1.25 MCXFA1628 Exhaust clamp 52mm (2") M8 x 1.25 MCXFA1629 Exhaust clamp 54mm (2 1/8") /8 M8 x 1.25 MCXFA1630 Exhaust clamp 58mm (2 1/4") /4 M8 x 1.25 MCXFA1631 Exhaust clamp 60mm (2 3/8") /8 M8 x 1.25 MCXFA1632 Exhaust clamp 65mm (2 1 /2") /2 M8 x 1.25 MCXFA1633 Exhaust clamp 67mm (2 5/8") /8 M8 x 1.25 MCXFA1634 Exhaust clamp 70mm (2 3/4") /4 M8 x 1.25 MCXFA1635 Exhaust clamp 76mm (3") M8 x 1.25 MCXFA1636 Exhaust clamp 79mm (3 1/8") /8 M8 x 1.25 MCXFA1637 Exhaust clamp 83mm (3 1/4") /4 M8 x 1.25 MCXFA1638 Exhaust clamp 89mm (3 1/2") /2 M8 x 1.25 MCXFA1639 Exhaust clamp 92mm (3 5/8") /8 M8 x 1.25 MCXFA1640 Exhaust clamp 95mm (3 3/4") /4 M8 x 1.25 MCXFA1641 Exhaust clamp 102mm (4") M8 x 1.25 Exhaust clamps 65

66 Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles (Products available in JDPoint through TS programme B3) A B C D E Part Number Product Pack Pack Shank Overall Overall Internal Internal Qty Content (mm) length width length width (mm) (mm) (mm) (mm) MCXFA1290 Wire rope grip 3mm 5 4 3, MCXFA1291 Wire rope grip 4.5mm ,5 MCXFA1292 Wire rope grip 6mm MCXFA1293 Wire rope grip 8mm MCXFA1294 Wire rope grip 9.5mm ,5 MCXFA1295 Wire rope grip 11mm MCXFA1302 D shackles 5mm MCXFA1303 D shackles 6mm MCXFA1304 D shackles 8mm MCXFA1305 D shackles 10mm MCXFA1306 D shackles 11mm MCXFA1307 D shackles 12mm MCXFA1308 Snap hook 6x60mm MCXFA1309 Snap hook 8x80mm MCXFA1310 Snap hook 10x100mm MCXFA1311 Snap hook 11x120mm MCXFA1312 Snap hook 12x140mm MCXFA1313 Quick link 6x58mm MCXFA1314 Quick link 8x75mm MCXFA1315 Quick link 9x82mm MCXFA1316 Quick link 12x106mm MCXFA1317 Quick link 16x146mm A B C D Part Number Product Pack Pack Thread Min Max Overall Qty Content (mm) length length width (mm) (mm) (mm) MCXFA1296 Turnbuckle Eye/Eye 10mm MCXFA1297 Turnbuckle Eye/Eye 12mm MCXFA1298 Turnbuckle Hook/Eye 10mm MCXFA1299 Turnbuckle Hook/Eye 12mm MCXFA1300 Turnbuckle Hook/Hook 10mm MCXFA1301 Turnbuckle Hook/Hook 12mm Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles

67 Wire Rope Grips, D Shackles, Snap Hooks, Quick links & Turnbuckles 67

68 Top link pins, single and dual category, chain and handle options (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Cat A (Diameter) B (Length) metric imperial metric imperial MCXFA1475 Top Link pin Cat / MCXFA1481 Top Link pin Cat / /4 MCXFA1471 Top Link pin Cat / /4 MCXFA1472 Top Link pin Cat / /8 MCXFA1473 Top Link pin Cat / /4 MCXFA1470 Top Link pin Cat / /4 MCXFA1474 Top Link pin Cat / /4 MCXFA1466 Top Link pin Cat MCXFA1469 Top Link pin Cat /8 MCXFA1468 Top Link pin Cat /4 MCXFA1467 Top Link pin Cat /16 MCXFA1500 Top Link pin Cat / /8 Part Number Product Cat A (Diameter) B (Length) metric imperial metric imperial MCXFA1486 Top link pin with chain Cat / /4 MCXFA1488 Top link pin with chain Cat / /8 MCXFA1487 Top link pin with chain Cat / /4 MCXFA1490 Top link pin with chain Cat /8 MCXFA1491 Top link pin with chain Cat /16 MCXFA1493 Top link pin with chain Cat MCXFA1489 Top link pin with chain Cat /16 MCXFA1492 Top link pin with chain Cat /16 MCXFA1494 Top link pin with chain Cat / /8 MXCFA1495 Top link pin with chain Cat / /8 68 Top link pins, single and dual category, chain and handle options

69 Top link pins, single and dual category, chain and handle options (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Cat A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial MCXFA1484 Top link pin with Handle Cat / / /4 MCXFA1485 Top link pin with Handle Cat / /4 MCXFA1496 Top link pin with Handle Cat / / /4 MCXFA1497 Top link pin with Handle Cat / / /8 1 2 Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) E (Length) metric imperial metric imperial metric imperial metric imperial metric imperial 1 MCXFA1478 Top Link pin Dual Cat Cat 1/2 19 3/ / / /8 1 MCXFA1482 Top Link pin Dual Cat Cat 2/ / / / /4 2 MCXFA1479 Top Link pin Dual Cat Cat 1/2 19 3/ / / /8 2 MCXFA1483 Top Link pin Dual Cat Cat 2/ / / /4 19 3/4 1 2 Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) metric imperial metric imperial metric imperial metric imperial 1 MCXFA1480 Top Link pin stepped Cat 1/2 19 3/ /8 22 7/ MCXFA1477 Top Link pin stepped Cat 2/ / /8 19 3/4 Top link pins, single and dual category, chain and handle options 69

70 Lower linkage pins, single and dual category and handle options (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Cat A (Diameter) B (Length) metric imperial metric imperial MCXFA1476 Lower link pin Cat / /4 MCXFA1332 Lower link pin Cat / /16 MCXFA1328 Lower link pin Cat / MCXFA1498 Lower link pin Cat / /8 MCXFA1499 Lower link pin Cat / /8 Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) metric imperial metric imperial metric imperial metric imperial MCXFA1348 Lower link pin dual cat Cat1/2 22 7/ / / /8 MCXFA1321 Lower link pin dual cat Cat1/2 22 7/ / / /8 MCXFA1322 Lower link pin dual cat Cat1/2 22 7/ / / /8 Part Number Product Cat A (Diameter) B (Length) C (Length) D (Length) E (Diameter) metric imperial metric imperial metric imperial metric imperial metric imperial MCXFA1330 Lower link pin dual cat Cat 1/2 22 7/ / / / /8 Part Number Product Cat A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial MCXFA1331 Lower link pin with handle Cat / / /4 MCXFA1333 Lower link pin with handle Cat / / /4 MCXFA1389 Lower link pin with handle Cat / / /4 MCXFA1390 Lower link pin with handle Cat / / /4 Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) E (Length) metric imperial metric imperial metric imperial metric imperial metric imperial MCXFA1329 Lower link pin dual cat Cat 1/2 22 7/ / / /8 10 3/8 MCXFA1458 Lower link pin dual cat Cat 1/2 22 7/ / / /8 16 5/8 70 Lower linkage pins, single and dual category and handle options

71 Implement mounting pins, single and dual category, (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Cat A (Diameter) B (Length) C (Diameter) Thread metric imperial metric imperial metric imperial MCXFA1350 Implement pin Cat1 22 7/ /4 22 7/8 5/8" UNF MCXFA1351 Implement pin Cat1 22 7/ /4 22 7/8 7/8" UNF MCXFA1353 Implement pin Cat1 22 7/ / /8 7/8" UNF MCXFA1319 Implement pin Cat1 22 7/ /4 19 3/4 3/4" UNF MCXFA1324 Implement pin Cat1 22 7/ / /8 1 1/8" UNF MCXFA1323 Implement pin Cat1 22 7/ / " UNF MCXFA1326 Implement pin Cat / /8 1 1/8" UNF MCXFA1352 Implement pin Cat / /8 22 7/8 7/8" UNF MCXFA1318 Implement pin Cat / /8 19 3/4 3/4" UNF MCXFA1327 Implement pin Cat / / " UNF MCXFA1349 Implement pin Cat / / /8 7/8" UNF MCXFA1338 Implement pin Cat3 36,6 1 7/ / /8 1 1/8" UNF Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) Thread metric imperial metric imperial metric imperial metric imperial MCXFA1455 Implement pin, dual cat Cat1/2 22 7/ / / /8 1" UNF MCXFA1457 Implement pin, dual cat Cat1/2 22 7/ / / /8 1" UNC Part Number Product Cat A (Diameter) B (Length) C (Length) Thread metric imperial metric imperial metric imperial MCXFA1320 Implement pin adjustable Cat1 22 7/ / /4 7/8" UNF MCXFA1325 Implement pin adjustable Cat / / /16 1 1/8" UNC Part Number Product Cat A (Diameter) B (Length) C (Length) D (Diameter) Thread metric imperial metric imperial metric imperial metric imperial MCXFA1454 Implement pin, dual cat adjustable Cat1/2 22 7/ / / /8 1" UNF Part Number Product Cat A (Diameter) B (Length) C (Diameter) D (Length) metric imperial metric imperial metric imperial metric imperial MCXFA1456 Implement pin fixed Cat1 22 7/ /8 22 7/ /8 MCXFA1453 Implement pin fixed Cat / /8 22 7/ Implement mounting pins, single and dual category, adjustable and fixed options 71

72 Top link assemblies and replacement ends (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content Part Number Product Cat LH Cat RH Cat Min length A Max length B Tube length C Thread (mm) (") (mm) (") (mm) (") Size 1 MCXFA1397 Top link assembly Cat 0/ / / /2 3/4 UNC 1 MCXFA1398 Top link assembly Cat 0/ / / /4 3/4 UNC 2 MCXFA1400 Top Link Assembly Cat 1/ / /4 1 1/8 UNC 2 MCXFA1403 Top Link Assembly Cat 1/ / / /8 UNC 2 MCXFA1404 Top Link Assembly Cat 1/ / /2 1 1/8 UNC 2 MCXFA1402 Top Link Assembly Cat 1/ / /2 1 1/8 UNC 2 MCXFA1401 Top Link Assembly Cat 1/ / / /16 1 1/8 UNC 2 MCXFA1405 Top Link Assembly Cat 1/ / / /4 1 1/8 UNC 2 MCXFA1399 Top Link Assembly Cat 1/ / /8 UNC 2 MCXFA1406 Top Link Assembly Cat 1/ / / /2 1 1/8 UNC 2 MCXFA1407 Top Link Assembly Cat 1/ / /16 1 1/8 UNC 2 MCXFA1408 Top Link Assembly Cat 1/ / /8 UNC 2 MCXFA1409 Top Link Assembly Cat 2/ / /2 1 1/8 UNC 2 MCXFA1411 Top Link Assembly Cat 2/ / / /8 UNC 2 MCXFA1414 Top Link Assembly Cat 2/ / /2 1 1/8 UNC 2 MCXFA1420 Top link Assembly Cat 2/ / / /4UNC 2 MCXFA1412 Top Link Assembly Cat 2/ / / /16 1 1/8 UNC 2 MCXFA1422 Top link Assembly Cat 2/ / / /4UNC 2 MCXFA1415 Top Link Assembly Cat 2/ / / /4 1 1/8 UNC 2 MCXFA1410 Top Link Assembly Cat 2/ / / /8 UNC 2 MCXFA1421 Top link Assembly Cat 2/ / / /8 1 1/4UNC 2 MCXFA1413 Top Link Assembly Cat 2/ / / /8 UNC 2 MCXFA1424 Top link Assembly Cat 2/ / / /8 UNC 2 MCXFA1423 Top link Assembly Cat 2/ / / /8 1 1/4UNC 2 MCXFA1425 Top link Assembly Cat 3/ / / /8 UNC 2 MCXFA1426 Top link Assembly Cat 3/ / / /8 UNC 3 MCXFA1437 Top Link Assembly H/D Cat 2/ / / /4 UNC 3 MCXFA1438 Top Link Assembly H/D Cat 2/ / / /8 1 1/4 UNC 3 MCXFA1439 Top Link Assembly H/D Cat 2/ / / /4 UNC 3 MCXFA1436 Top link Assembly H/D Cat 2/ / / x3mm 3 MCXFA1431 Top link Assembly H/D Cat 2/ / / x3mm 3 MCXFA1432 Top link Assembly H/D Cat 3/ / / x3mm 3 MCXFA1433 Top link Assembly H/D Cat 2/ / / /8 36x3mm 3 MCXFA1434 Top link Assembly H/D Cat 2/ / / /8 36x3mm 3 MCXFA1435 Top link Assembly H/D Cat 3/ / / /8 36x3mm 72 Top link assemblies and replacement ends

73 Top link assemblies and replacement ends (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Cat Hand Length A Thread size (mm) (") MCXFA1428 Replacement top link end Cat 1 LH /4 1 1/8 UNC MCXFA1427 Replacement top link end Cat 1 RH /4 1 1/8 UNC MCXFA1430 Replacement top link end Cat 2 LH /4 1 1/8 UNC MCXFA1429 Replacement top link end Cat 2 RH /4 1 1/8 UNC MCXFA1418 Replacement top link end Cat 2 LH /4 UNC MCXFA1419 Replacement top link end Cat 2 RH /4 UNC MCXFA1416 Replacement top link end H/D Cat 2 LH /4 UNC MCXFA1417 Replacement top link end H/D Cat 2 RH /4 UNC Lower link multi-hole drawbars (Products available in JDPoint through programme B3) Part Colour Product Cat A (Diameter) B (Length) C (Length) Hole Dia Hole qty Tensile strength Number metric imperial metric imperial metric imperial (kg/cm²) MCXFA1441 Multi-hole Drawbar Cat / / / MCXFA1442 Multi-hole Drawbar Cat / / MCXFA1443 Multi-hole Drawbar Cat / / / MCXFA1444 Multi-hole Drawbar Cat / / / MCXFA1440 Multi-hole Drawbar Cat / / MCXFA1445 Multi-hole Drawbar Cat / / MCXFA1446 Multi-hole Drawbar Cat / / / Top link assemblies and replacement ends 73

74 Top and lower linkage balls, quick hitch balls, conversion bushes and spacers (Products available in JDPoint through programme B3) Part Number Product Pack Qty Pack Cat A Diameter B Hole Diameter contents metric imperial metric imperial MCXFA1344 Quick hitch ball spacer lower link /16 28,7 1 1/8 MCXFA1342 Quick hitch ball spacer lower link /2 28,7 1 1/8 MCXFA1343 Quick hitch ball spacer lower link /2 37,4 1 7/16 Part Number Product Pack Qty Pack Cat A Hole Diameter B Diameter C Length Drilling dia contents metric imperial metric imperial metric imperial metric imperial MCXFA1346 Conversion bush lower link with drilling ,4 7/ / / /32 MCXFA1347 Conversion bush lower link with drilling ,7 1 3/16 36,6 1 7/ / /32 Part Number Product Pack Qty Pack Cat A Hole Diameter B Diameter C Length contents metric imperial metric imperial metric imperial MCXFA1447 Conversion bush lower link ,3 5/8 22 7/ /16 MCXFA1450 Conversion bush lower link ,4 7/ / /16 MCXFA1452 Conversion bush lower link ,7 1 3/16 36,6 1 7/ /16 Lower link Spring Used to retain and control lateral movement of tractor lift arms. Min Length 500mm Max Length 720mm MCXFA Top and lower linkage balls, quick hitch balls, conversion bushes and Spacers

75 Top and lower linkage balls, quick hitch balls, conversion bushes and spacers (Products available in JDPoint through programme B3) Part Number Product Pack Qty Pack contents Cat A Hole diameter B Diameter C Ball width metric imperial metric imperial metric imperial MCXFA1386 Quick hitch ball top link , / /16 MCXFA1388 Quick hitch ball top link , / /16 MCXFA1387 Quick hitch ball top link / / /16 Part Number Product Pack Qty Pack Cat A Hole diameter B Diameter C Length contents metric imperial metric imperial metric imperial MCXFA1449 Conversion bush top link ,3 3/4 25, MCXFA1448 Conversion bush top link ,3 3/4 25, /8 MCXFA1451 Conversion bush top link ,7 1 31,75 1 1/ Part Number Product Pack Qty Pack Cat A Hole diameter B Ball Diameter C Ball width contents metric imperial metric imperial metric imperial MCXFA1385 Quick hitch ball lower link ,7 1 1/ / /4 MCXFA1383 Quick hitch ball lower link ,7 1 1/ / /4 MCXFA1384 Quick hitch ball lower link ,4 1 7/ / /4 MCXFA1334 Quick hitch ball lower link ,4 1 7/ / /4 MCXFA1335 Quick hitch ball lower link / /4 Part Number Product Pack Qty Pack Cat A Hole diameter B Diameter C Ball width D Diameter contents metric imperial metric imperial metric imperial metric imperial MCXFA1340 Quick hitch ball lower link with cone ,7 1 1/ / / /2 MCXFA1341 Quick hitch ball lower link with cone ,7 1 1/ / / /2 MCXFA1339 Quick hitch ball lower link with cone ,4 1 7/ / / /2 Top and lower linkage balls, quick hitch balls, conversion bushes and spacers 75

76 Clevis, locking and remote locking type, drawbar pins (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product A (Diameter) B (Length) metric imperial metric imperial MCXFA1354 Drawbar pin 15 5/ /4 MCXFA1356 Drawbar pin 19 3/ /8 MCXFA1365 Drawbar pin 19 3/ /8 MCXFA1369 Drawbar pin 19 3/ /4 MCXFA1355 Drawbar pin 22 7/ /8 MCXFA1366 Drawbar pin 22 7/ /8 MCXFA1370 Drawbar pin 22 7/ /4 MCXFA1364 Drawbar pin 25, /8 MCXFA1368 Drawbar pin 25, /16 MCXFA1371 Drawbar pin / /16 MCXFA1367 Drawbar pin / /16 MCXFA1362 Drawbar pin / /16 MCXFA1363 Drawbar pin / /16 Part Number Product A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial MCXFA1358 Drawbar pin with locking handle / / Part Number Product A (Diameter) B (Length) C (Length) metric imperial metric imperial metric imperial MCXFA1357 Drawbar pin remote locking / MCXFA1359 Drawbar pin remote locking / / MCXFA1360 Drawbar pin remote locking / / MCXFA1361 Drawbar pin remote locking / / Clevis, locking and remote locking type, drawbar pins

77 Bolt on ball hitch pins, towing balls and ball and clevis assemblies (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Ball diameter A Length B Diameter C Length D length Thread Tow capacity metric metric imperial metric imperial metric imperial metric imperial size (kg) MCXFA1378 Ball hitch pin / / / /2 3/4" UNF 500 MCXFA1379 Ball hitch pin / / / /8 7/8" UNF 1250 MCXFA1377 Ball hitch pin / /8 1" UNF 1250 Part Number Product Ball diameter A Length B Diameter C Length D length Thread Tow capacity metric metric imperial metric imperial metric imperial metric imperial size (kg) MCXFA1376 Ball hitch pin / / / /8 7/8" UNF 1250 MCXFA1375 Ball hitch pin / / /8 1" UNF 2000 Part Number Product Ball diameter A Length B Diameter C Length D length Thread Tow capacity metric metric imperial metric imperial metric imperial metric imperial size (kg) MCXFA1381 ATV Ball hitch pin / / /8 8 5/16 5/8 UNF 350 MCXFA1380 ATV Ball hitch pin / / /4 5 3/16 3/4 UNF 350 Part Number Product Ball diameter A Length B Length Hole diameter Tow capacity metric metric imperial metric imperial metric imperial (kg) MCXFA1372 Towing ball / / / Bolt on ball hitch pins, towing balls and ball and clevis assemblies 77

78 Bolt on ball hitch pins, towing balls and ball and clevis assemblies (Products available in JDPoint through programme B3) All products displayed on this page have pack quantity 1 and pack content 1 Part Number Product Ball diameter A Length B Length C Length D Length Hole Diameter Tow capacity metric metric imperial metric imperial metric imperial metric imperial metric imperial (kg) MCXFA1374 Ball & clevis coupling / / / / / Part Number Product Ball diameter A Length B Length C Length D Length Hole Diameter Tow capacity metric metric imperial metric imperial metric imperial metric imperial metric imperial (kg) MCXFA1373 Ball & clevis coupling / / / / / Trailer Jack (Products available in JDPoint through TS programme B3) Wheeled jack 400Kg Wheel jack bracket Trailer wheel jack, shaft diameter 50mm. 400Kg maximum weight, minimum height 540mm, maximum height 760mm. Solid rubber tyre 40mm width and 200mm diameter. Use with MCXFA1221 mounting clamp MCXFA1220 Mounting clamp bracket for use with 50mm shaft diameter jacks and MCXFA1220 wheel jack. Mounting holes 10mm diameter and hole centres 95mm MCXFA Bolt on ball hitch pins, towing balls and ball and clevis assemblies

79 Moisture Testers Moisture Testers 79

80 Moisture Testers (Products available in JDPoint through TS program B3) moisture. Moisture management is a continuous process that requires measuring tools. Protect your investment by testing moisture content before, during and after the season. John Deere moisture testers, whether baled hay testers, windrow hay testers, grain or grinding grain testers, operate accurately and Non Compaction Grain Tester (Moisture and Test Weight with Carrying Case) Features Direct readout for 20 different grain scales Displays grain test weight (no pre-weighing) Measures moisture fast, easy, and accurately Non-compaction design with LCD display USB compatibility Automatic temperature compensation Supplied with protective carry case Two years warranty Specifications Moisture range: 6% 45% depending on grain tested Temperature range: F (5 45 C) Repeatability and accuracy: ±0.3% in normal moisture range for stored grain Display resolution: 0.1% moisture 4 AA batteries required (not included) Pack Content: 1 Pack Qty: 1 Part Number: MCXFA Moisture Testers

81 Grain Moisture Testers (Products available in JDPoint through TS program B3) Grinding Grain Moisture Tester Features and Specifications Fast accurate measurements of more than 30 grain scales. Smallest sample needed by any portable tester Automatic average of the last four measurements Individual offset adjustment by crop Illuminated LCD display with 0.1% moisture display resolution Repeatability and accuracy: ± 0.5% in normal moisture range for stored grain below 18% moisture Temperature range: 0 50 C ( F) 9V battery required (not included) Supplied with a protective carry case Two-year warranty Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1874 Moisture Check-Plus Grain Tester Features and Specifications Direct readout for 40 different grain scales Built-in calibration button displays the test results average Higher-frequency, capacitive circuit improves accuracy Enhanced temperature compensation circuit Multilingual display English, Spanish, French, German, Italian, Portuguese and Swedish Protective carrying case with shoulder strap included Illuminated LCD display with 0.1% moisture display resolution Repeatability and accuracy: ± 0.5% in normal moisture range for stored grain Moisture range: 5 40% depending on grain tested Temperature range: 0 45 C ( F) Two 9V batteries required (not included) Two-year warranty Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1873 Replacement Carrying Case Carrying Case for Grain Moisture Tester MCXFA1873 Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1875 Replacement Cap Replacement Cap for Grain Moisture Tester MCXFA1873 Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1876 Grain Moisture Testers 81

82 Hay Moisture Testers (Products available in JDPoint through TS program B3) Handheld, Baled Hay Moisture Tester with Calibration Clip With 50cm (20") probe Features and Specifications Includes calibration clip less than 20 seconds to calibrate Above and below moisture limit indication Illuminated LCD display with 0.1% display resolution Accurate throughout the normal range of stored, baled hay Moisture range: 8 44% depending on hay tested Temperature range: C ( F) 9V battery required (not included) Two-year warranty Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1870 Windrow Hay Moisture Tester Features and Specifications Only portable hay moisture tester available for use Quickly measures loose hay and forage from a windrow without committing the time and expense of using baling or chopping equipment before the hay is at the correct moisture levels bucket, insert tester probe and press a button Illuminated LCD display with 0.1% display resolution Accurate within 2 4% Moisture range: 13 70% depending on hay tested 9V battery required (not included) Two-year warranty Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1871 Handheld, Pistol-grip Hay Moisture Tester with 45 cm (18") probe Features and Specifications Direct readout for moisture % and temperature (ºF and ºC) Extra-rugged probe shaft made from aircraft aluminium Sturdy pistol-grip handle Illuminated LCD display with 0.1% moisture display resolution Accurate throughout the normal range of stored, baled hay Moisture range: % depending on hay tested Temperature range: C ( F) 9V battery required (not included) Two-year warranty Pack Content: 1 Pack Qty: 1 Part Number: MCXFA cm (18") replacement Probe 450mm (18") Replacement Probe for Pistol-grip Hay Moisture Tester MCXFA1872 Pack Content: 1 Pack Qty: 1 Part Number: MCXFA Hay Moisture Testers

83 Baler Mounted Hay Moisture Testers (Products available in JDPoint through TS program B3) Baler Mounted Hay Tester New multi-sensor technology takes readings on the left, right side and middle of the bale. Features Advanced multi-sensor technology for greater overall accuracy while baling hay with square or round balers Sturdy display module mounts in tractor cab and displays readings from sensors mounted in baler Averages updated and displayed every 3 seconds Illuminated LCD display and keypad ± Moisture offset adjustments Adjustable high/low limit of moisture reading Specifications Moisture range: 8% 30+% depending on baler type Accurate throughout the normal range of stored hay Display resolution: 0.1% moisture 2 year waranty Baler Sensor Pad Kit (2 Pads with Hardware and 2 x 10.5m Sensor Cables) Can be used as a replacement sensor kit for MCXFA1910 or to use as an expansion kit where more than one baler can be used with the existing tractor mounted monitor. Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1911 Product Includes: Display module 10 power cable 2 sensor pads 2 35 sensor cables Mounting hardware USB cable Installation instructions Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1910 Baler Sensor Pad (1 EA) Sensor Cable 10.5m (1 EA) Replacement sensor pad for MCXFA1910 Baler Mounted Hay Tester Pack Content: 1 Pack Qty: 1 Replacement sensor cable for MCXFA1910 Baler Mounted Hay Tester. Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1912 Part Number: MCXFA1913 USB connection cable Power Cable 3m Replacement USB connection cable for downloading data from MCXFA1910 Baler Mounted Hay Tester. Pack Content: 1 Pack Qty: 1 Replacement power cable for MCXFA1910 Baler Mounted Hay Tester. Pack Content: 1 Pack Qty: 1 Part Number: MCXFA1915 Part Number: MCXFA1914 Baler Mounted Hay Moisture Testers 83

84

85

86 Tapes (Products available in JDPoint through TS programme B3) 86 Tapes

87 Tapes PVC (Products available in JDPoint through TS programme B3) PVC tape Black 100mm x 33m Black PVC tape, strong multi-purpose tape, ideal for sealing damaged silage bale wrap. 100mm x 33m. Package quantity: 6 MCXFA1172 PVC tape White 100mm x 33m White PVC tape, strong multi-purpose tape, ideal for sealing damaged silage bale wrap. 100mm x 33m. Package quantity: 6 MCXFA1168 Tapes Electrical Insulation (Products available in JDPoint through TS programme B3) Insulation tape Black Insulation tape Multi pack 3 colours Black electrical insulation tape low voltage, Phase A. IEC , flame retardant to AFERA 4009 T6, roll size 19 mm x 20 m Package quantity: 10 MCXFA1178 Electrical insulation tape low voltage, Phase A, multi pack 3 colours Black/red/blue. IEC , flame retardant to AFERA 4009 T6. Roll size 19 mm x 20 m Pack contents: 3 MCXFA1179 Tapes PTFE (Products available in JDPoint through TS programme B3) PTFE tape White PTFE tape for sealing pipe threads. Resistant to alkalis and acids, non flammable, 12mm wide x 10m. Package quantity: 10 MCXFA1170 Tapes 87

88 Tapes Sealing & Masking (Products available in JDPoint through TS programme B3) Duct tape Silver 50mm x 50m Silver duct tape water, oil and grease resistant. Ideal for sealing and temporary repairs. 50mm x 50m. Package quantity: 6 MCXFA1173 Masking tape 25mm x 50m Masking tape. Suitable for protecting areas when painting. Low tack adhesive for easy repositioning. 25mm x 50m. MCXFA1175 Masking tape 50mm x 50m Masking tape. Suitable for protecting areas when painting. Low tack adhesive for easy repositioning. 50mm x 50m. Pack contents 1 Package quantity 5 MCXFA1176 Duct tape Black 50mm x 50m Black duct tape water, oil and grease resistant. Ideal for sealing and temporary repairs. 50mm x 50m. Package quantity: 6 MCXFA1174 Packing tapes (Products available in JDPoint through TS programme B3) Packing Tape White tape with two-coloured John Deere logo. Length: 66 m. MCV Security tapes (Products available in JDPoint through TS programme B3) Security Tape Yellow barrier tape with green John Deere logo. Ideal for marking out large areas. Length: 100 m. MCV Tapes

89 Hand Cleaners (Products available in JDPoint through TS programme B3) Lime beaded hand cleaner with Aloe Vera Based on natural citrus extracts, this beaded, semi-gel skin cleanser rapidly and effectively removes heavy soiling from oil, grease, paint, dirt and grime without exposing the user to harsh petroleum based products. This cleaner contains Aloe Vera as a natural antiseptic and has an emollient to condition and moisturise the skin. It's citrus lime content assists cleaning and leaves a pleasant residual citrus smell after washing. This cleaner works effectively with hot or cold water and is designed for conditions where regular cleaning of hands is essential. (Should not be used on face or sensitive skin and areas of broken or sore skin should be avoided) Pumice hand cleaner with Aloe Vera This premium hand cleaning paste is solvent free, beaded and specially formulated to deep clean and remove stubborn heavy soiling from oil, grease, paint, glue, inks and general dirt and grime. The pumice content assists deep cleansing, an emollient leaves a soft feel to the skin and the Aloe Vera acts as a natural antiseptic. The soft paste consistency allows easy massage into the skin and rinses away to leave a pleasant citrus fragrance. Designed for conditions where regular cleaning of hands is essential. (Should not be used on face or sensitive skin and areas of broken or sore skin should be avoided) Lime beaded hand cleaner with Aloe Vera 1 ltr. Pack contents 1 Package quantity 24 MCXFA1550 Pumice hand cleaner with Aloe Vera 1 ltr Pack contents 1 Package quantity 24 MCXFA1552 Lime beaded hand cleaner with Aloe Vera 4.5 ltr. Pack contents 1 Package quantity 8 MCXFA1551 Pumice hand cleaner with Aloe Vera 4.5 ltr Pack contents 1 Package quantity 8 MCXFA1553 Pump and lid for 4.5 ltr jars A metal pump and screw top lid for easy and controlled dispensing of hand cleaner. A dispensing pump can help to reduce the risk of cross infection of users. Only suitable for use with the 4.5 litre containers. MCXFA1555 Hand Cleaners 89

90 Wheel Spinners (Products available in JDPoint through TS programme B3) A selection of John Deere wheel spinners with the choice of colour and logo to suit your vehicle or preference. Each is manufactured with a heavy duty, aluminium body construction for durability and a non slip, comfort grip handle for safe and secure use. Each wheel spinner comes with two brackets and a rubber adapter for mounting on either regular or deep spoke wheels. Wheel spinner, black with yellow logo Pack contents 1 Package quantity 12 MCXFA1561 Wheel spinner, green with yellow logo Pack contents 1 Package quantity 12 MCXFA1562 Wheel spinner, black with 1968 logo Pack contents 1 Package quantity 12 MCXFA1564 Wheel spinner, green with vintage 1950 logo Pack contents 1 Package quantity 12 MCXFA1565 These stylish deluxe wheel spinners fit securely to all steering wheels with a thickness of up to 31.7mm (1¼ inch). They are recommended for lawn and garden machinery, as well as tractors and other larger vehicles. Each has a high quality and smooth spinning movement and a permanent John Deere logo. The split base design enables quick and easy mounting and the ribbed, soft grip handle ensures comfortable, safe and secure use at all times. Supplied with fixing bolts, allen key and rubber spacer for smaller steering wheels. Deluxe wheel spinner with green logo Pack contents 1 Package quantity 12 MCXFA1566 Deluxe wheel spinner with black logo Pack contents 1 Package quantity 12 MCXFA1567 Wheel spinner adapter kit The wheel spinner adapter kit allows proper mounting of a wheel spinner in an upright position on to smaller steering wheel, typically found on lawn and garden equipment. Kit contents 2 x plastic mounting brackets, 2 x bolts, 2 x nuts and 2 x washers. Pack contents 1 Package quantity 8 MCXFA Wheel Spinner

91 Wiper Blades (Products available in JDPoint through TS programme B3) A range of quality wiper blades from 305mm 610mm (12" 24"). Molded from 100% natural rubber to produce low noise and judder free wiping. The full metal structure is suitable for many Part Number Product Pack Quantity Pack Content Length MCXFA1750 Wiper blade mm (12") MCXFA1751 Wiper blade mm (14") MCXFA1752 Wiper blade mm (15") MCXFA1753 Wiper blade mm (16") MCXFA1754 Wiper blade mm (18") MCXFA1755 Wiper blade mm (19") MCXFA1756 Wiper blade mm (20") MCXFA1757 Wiper blade mm (21") MCXFA1758 Wiper blade mm (22") MCXFA1759 Wiper blade mm (24") Wiper blade dispenser kit 50pcs 50 piece dealer Wiper blade kit with sizes ranging from 305mm to 610mm (12" 24") 5 pieces of each size. Includes compact point of sale merchandiser for easy and effective in-shop display. MCXFA1762 Wiper Blades 91

92 Seat Covers / Floor mats 92 Seat Covers / Floor mats

93 Seat Covers (Products available in JDPoint through TS programme B3) A range of tailor-made seat covers, with John Deere logo, for long-lasting protection of your seat. Easy care leatherette cover high quality leatherette cloth tear proof material for long-life 10 mm foam centre layer easily wipes clean with water Enjoy the comfort of heated seat cover in the winter high quality reinforced cloth tear proof material for long-life material treated with dirt repellant 10 mm foam centre layer machine washable up to 30 C heated panels Made to measure seat cover for long-lasting protection of your seat high quality reinforced cloth tear proof material for long-life material treated with dirt repellant 10 mm foam centre layer machine washable up to 30 C Yellow leatherette seat covers keep your seat in a good condition after frost and rain high quality leatherette cloth tear proof material for long-life easy wipes clean with water Universal seat cover for occasional protection Embossed with a John Deere logo Tear proof material for long-life Seat Covers 93

94 Seat Covers (Products available in JDPoint through TS programme B3) Turf Machinery Machine Seat type Seat part number Seat remarks Seat cover part number Gator: HPX XUV Turf 2020 series MCJHD3367 Compact utility tractor (cab): 1000 series 3020 series 4010 series 4020 series MCJHD3367T Compact utility tractor (open station): 3020 series 4010 series 4020 series MCJHD4987S Front mower: 1515 Series AL AL Plastic seat without head rest MCJHD4300SJ 94 Seat Covers

95 Seat Covers (Products available in JDPoint through TS programme B3) Tractors 40/50-series and 31X0-34X0 Machine Seat cover part number MCJHD2079 Tractors 5000, 5010, 5010N & SN, 5015 F&V or 5G-series, including open station Machine Seat type Seat part number Seat remarks Seat cover part number 5000 N & SN 5010 N & SN 5015 F & V 5GF & GV ER ER Fabric seat MCJHD series 5010 series 5015 series & HC 5G series & GH ER Plastic seat MCJHD3449S 5000 series 5010 series 5015 series & HC 5G series & GH ER Fabric seat MCJHD3449 Seat Covers 95

96 Seat Covers (Products available in JDPoint through TS programme B3) Tractors 5000, 5010, 5010N & SN, 5015 F&V or 5G-series, including open station Machine Seat type Seat part number Seat remarks Seat cover part number 5000 series 5010 series 5015 series & HC 5G series & GH ER MCJHD series 5010 series 5015 series & HC 5G series & GH ER ER MCJHD series < 02/2006 MCJHD series N & SN 5010 series N & SN 5015 series F & V 5GF & GV ER Plastic seat MCJHD3647S 96 Seat Covers

97 Seat Covers (Products available in JDPoint through TS programme B3) Tractors 5020, 5M, 5R, and 74/7530 Premium, 6M, 6R, including open station Machine Seat type Seat part number Seat remarks Standard seat cover part number Leatherette seat cover part number 6000 series 6010 series MCJHD series MCJHD series 5R series AL MCJHD1730 MCJHD4270S 5020 series 5M series 5R series 6000 series & SE 6010 series & SE 6020 series & SE 6030 series + Premium 6M series 6R series 7030 Premium (E) (= ) AL AL AL AL Without head rest MCJHD4300 MCJHD4300S 5020 series (prior to 2007) 6000 series & SE 6010 series & SE 6020 series & SE 6030 series + Premium 7030 Premium (E) (= ) AL With 3 cushion and adjustable cushion depth and inclination MCJHD1729 MCJHD1729CH (with heating panels) MCJHD4245S Seat Covers 97

98 Seat Covers (Products available in JDPoint through TS programme B3) Tractors 5020, 5M, 5R, and 74/7530 Premium, 6M, 6R, including open station Machine Seat type Seat part number Seat remarks Standard seat cover part number Leatherette seat cover part number 6M series 6R series BL15038 BL15039 With 4 cushion and adjustable cushion depth and inclination MCJHD4402 5E series 5M series OOS 6000 series 6010 series 6020 series 6030 series 6M series AL AL Plastic seat without head rest MCJHD4300SJ 98 Seat Covers