TOYOTA YARIS HATCHBACK INTERIOR LIGHT UPGRADE Preparation
|
|
- Monica Mosley
- 5 years ago
- Views:
Transcription
1 Preparation Part Number PTS NOTE: Part number of this accessory may not be the same as the part number show Kit Contents Item # Quantity Reqd. Description Light Guide Light Guide 3 1 Hardware Kit 4 2 Blue Light Engines 5 1 Switch Kit 6 1 Blue cup holder kits 7 1 Wire Harness extension 9 1 Templates Hardware Bag Contents Item # Quantity Reqd. Description 1 2 Catamounts x.3/4 screws 3 2 Catamount with bracket 4 4 Wire tie Wire tie foam pads 7 2 T-Taps 8 2 1/2 spacer 9 2 rivets 10 2 rivet washers Switch Bag Contents Item # Quantity Reqd. Description 1 1 Switch 2 1 End Cap, Black 3 1 Illumination Nameplate 4 1 Installation tool 5 1 Bezel 6 1 Black spacer Conflicts Recommended Tools Personal & Vehicle Protection Vehicle Protection Safety Glasses Special Tools Installation Tools Installation Tools Phillips screwdriver #2 Nylon Removal Tool 1/8 Drill Bit Diagonal cutter Stubby screwdriver Drill Pliers Scissors Notes Notes Notes or wire tie tool #2 Phillips 1/2 Drill bit. UniBit or step drill rec. Scribe or Center punch Masking tape J Drill bit Wiping cloth Non-scratch Torque wrench 36 in-lbs Rivet gun Ratchet 10mm socket Special Chemicals Notes Approved cleaner General Applicability All models of Yaris Hatchback Recommended Sequence of Application Item # Accessory *Mandatory Vehicle Service Parts (may be required for reassembly) Item # Quantity Reqd. Description Legend STOP: Damage to the vehicle may occur. Do not proceed until process has been complied with. OPERATOR SAFETY: Use caution to avoid risk of injury. CAUTION: A process that must be carefully observed in order to reduce the risk of damage to the accessory/vehicle and to ensure a quality installation. TOOLS & EQUIPMENT: Used in Figures calls out the specific tools and equipment recommended for this process. Page 1 of 20 pages
2 Care must be taken when installing this accessory to ensure damage does not occur to the vehicle. The installation of this accessory should follow approved guidelines to ensure a quality installation. These guidelines can be found in the "Accessory Installation Practices" document. This document covers such items as:- Vehicle Protection (use of covers and blankets, cleaning chemicals, etc.). Safety (eye protection, rechecking torque procedure, etc.). Vehicle Disassembly/Reassembly (panel removal, part storage, etc.). Electrical Component Disassembly/Reassembly (battery disconnection, connector removal, etc.). Please see your Toyota dealer for a copy of this document. SPECIAL NOTE: Installation Sequences After TMS and Safety mandated preparatory steps have been taken, the installation sequence is the suggested method for completing the accessory installation. In some instances the suggested sequence is written for one associate to install and in others the sequence is given as part of a team accessory installation. Unless otherwise stated in the document, the associates may perform the installation steps in any order to make the installation as efficient as possible while maintaining consistent quality. Page 2 of 20 pages
3 1. Check kit for contents (a) Check kit for contents and damage. 2. Vehicle preparation (a) Apply protective covering to car. (b) Disconnect battery negative terminal. Fig. 3-1 (c) Wear eye protection as necessary 3. Console removal (a) Remove pad in cup holder. (b) Remove bolt in cup holder with 10mm socket. (Fig. 3-1) Fig. 3-2 (c) Remove switch console by lifting from rear. (Fig. 3-2) 1. Disconnect any switch connectors. (Fig. 3-3) (d) Remove shift knob by turning counterclockwise, manual transmission only. (Fig. 3-4) Fig. 3-3 Fig. 3-4 Page 3 of 20 pages
4 (e) Lift console from rear and remove from car. (Fig. 3-5) 4. Remove Center Control Panel (a) Using panel safe tool, remove left side of center dash trim piece. (Fig. 4-1) Fig. 3-5 (b) Remove right side of center dash trim piece. (Fig. 4-2) (c) Carefully un-clip center radio surround by pulling forward. Do not completely remove this piece. (Fig. 4-3) Fig. 4-1 Fig. 4-2 Fig. 4-3 Page 4 of 20 pages
5 (d) Remove center control panel by pulling forward. HVAC panel must be supported, do not suspend from harness. (Fig. 4-4) (e) Locate power leads that connect to power point. Location of power point is below HVAC control panel. (Fig. 4-5) Fig. 4-4 (f) Drop power leads below center control panel. Install T-taps in staggered fashion on power leads connected to power point, use pliers. (Fig. 4-6) 5. Install LED Lamps (a) Cut out marking template. Fig. 4-5 (b) Align console lighting area marking template on bottom as shown, tape in place as shown and mark hole locations using punch or scribe. (Fig. 5-1) Fig. 4-6 Fig. 5-1 Page 5 of 20 pages
6 (c) Drill pilot holes with a 1/8 drill bit. (Fig. 5-2) (d) Drill final holes with a letter J drill bit. (e) De-burr holes with de-burring tool. Fig. 5-2 (f) From outside the console, insert the lenses into the previously drilled holes. Press firmly to ensure the lenses are fully seated. (Fig. 5-3) (g) Lens insertion will appear as shown. (Fig. 5-4) Fig. 5-3 (h) From the back of the console, install the LED closest to power connection in passenger side hole. Press firmly to ensure the LEDs and lenses are fully engaged. Hold the lenses from outside of console while pressing. (Fig. 5-5) Fig. 5-4 Fig. 5-5 Page 6 of 20 pages
7 (i) If vehicle is equipped with manual transmission bundle and secure console lighting wires with foam tape so as not to interfere with shifter mechanism. (Fig. 5-6) Fig. 5-6 (j) If vehicle is equipped with automatic transmission, route cup holder harness connector towards passenger side of console and secure with foam pad. (Fig. 5-7) 6. Switch Installation (a) Cut out marking template. (b) Tape the drill template on the back of switch plate. Use center punch for pilot hole. (Fig. 6-1) Fig. 5-7 Fig. 6-1 Fig. 6-2 (c) Remove paper template. (d) Drill pilot hole with 1/8 drill bit. (e) Using a 1/2 drill bit (Uni-bit or step bit is highly recommended), drill the switch hole. (f) Clean the console surface to remove grease and wax. 1. Wipe the application area with approved cleaner and a clean with no-scratch cloth. 2. Rinse application area with clean distilled water and a clean noscratch cloth. 3. Dry the installation area using a clean dry, lint free cloth. (g) Insert switch bezel into the switch plate. (Fig. 6-2) Page 7 of 20 pages
8 (h) Using pull-tab, remove the tape liner from back of the switch plate. 1. Avoid contact with adhesive surface. Fig. 6-3 Fig. 6-4 (i) Using the bezel as a guide, install switch plate/bezel into the previously drilled 1/2 hole. 1. Align the edges of the switch plate even with the edges of the switch insert. (Fig. 6-3) 2. Once aligned, press down firmly to adhere tape. (j) Firmly insert the switch installation tool into the front of the bezel. (Fig. 6-4) 1. Place spacer over switch shaft with white end of sleeve against switch panel. (Fig. 6-5) 2. Turn switch tool clockwise to tighten bezel to switch. 3. Align leads as shown in picture. (Fig. 6-6) 4. Install end cap on switch. Fig. 6-5 Fig. 6-6 Page 8 of 20 pages
9 7. Harness Installation (a) Review general wiring layout diagram. (Fig. 7-1) 1. PW-Power, two male spade connectors. Fig. 7-1 Fig. 7-2 Fig SW-Switch, Three female spade connectors. 3. CH-Console lighting, female modular connector. 4. LED-LED Module, (2) female modular connectors. (b) Install wire harness along right side of console follow harness under center console to auxiliary power harness. (Fig. 7-2) (c) Route harness to previously installed T- taps on auxiliary power harness. (Fig. 7-3) (d) Attach power leads to T-taps. 1. Black wire on harness to white/black wire on auxiliary power lead, negative (-). (Fig. 7-3) 2. White wire on harness to grey wire on auxiliary lighter, positive (+). (Fig. 7-3) (e) Route LED module lead to Passenger side. (Fig. 7-4) Fig. 7-4 Page 9 of 20 pages
10 (f) Route LED module lead to drivers side LED module as shown. (Fig. 7-5) (g) Secure excess harness with 4 wire tie. (h) Reassemble and reinstall center control panel. Fig Install Passenger Side Light Guide, Shield Present (a) Remove Under dash shield. 1. Depress front edge tabs, drop shield pulling forward. (b) Remove felt cover. (Fig. 8-1) (c) Mark cover for drilling, use template and mark cover using punch or scribe. (Fig. 8-2a, 8-2b) Fig. 8-1 Fig. 8-2a Fig. 8-2b Page 10 of 20 pages
11 (d) Use 1/8 drill bit and drill hole for rivets. (Fig. 8-3) (e) Install rivet through light guide cradle. (Fig. 8-4) (f) Install rivet washer to rivet and install using rivet gun. (Fig. 8-5) Fig. 8-3 (g) Install LED module to clear end of 7 light guide as shown. Carefully note alignment of reflector (Fig. 8-6) 1. Install light guide onto cover attach with 7 wire tie. Fig. 8-4 Fig. 8-5 Fig. 8-6 Page 11 of 20 pages
12 2. Feed wire ties into the plastic mounts from the rear to front, orienting the wire tie head towards the rear of cover. (Fig 8-7) 3. Fasten light guide as shown and remove excess wire tie. (Fig. 8-8) Fig Light Guide mounted to cover. Route wires through hole in cover as shown. (Fig. 8-9) (h) Attach 12 extension harness to LED module, 1. Secure connector to cover using foam pad. (Fig. 8-10) Fig Run extension harness to left side of cover. Fig. 8-9 Fig Page 12 of 20 pages
13 3. Secure 12 extension harness to cover. (Fig. 8-11) (i) Reinstall felt pad to cover. (Fig. 8-12) (j) Reinstall shield. (Fig. 8-13) (k) Connect LED lead to previously installed harness. Fig Install Drivers Side Light guide, Cover Present (a) Remove driver s side cover. 1. Remove two (2) Phillips screw, indicated by arrows. (Fig. 9-1) 2. Lower front edge of shield and pull towards interior of vehicle. Fig Fig Fig. 9-1 Page 13 of 20 pages
14 (b) Using template use punch or scribe to mark holes to be drilled. (Fig. 9-2) (c) Use 1/8 bit to drill holes as marked. (d) Install rivet through light guide cradle. (Fig 9-3) Fig. 9-2 (e) Attach light guide rod mounts with 1/8 rivet. Use rivet washer on backside of cover. (Fig. 9-4) (f) Cradles will be oriented as shown. (Fig. 9-5) Fig. 9-3 Fig. 9-4 Fig. 9-5 Page 14 of 20 pages
15 (g) Install LED module to 12 Light guide with reflector positioned as shown. Install LED module to clear end of light guide. (Fig. 9-6) (h) Orient light guide with LED module on right side of cover as shown. (Fig. 9-7) Fig Attach light guide to cover using 7 wire ties, remove excess. (Fig. 9-7) (i) Trim excess cable tie. (Fig 9-8) (j) Reinstall shield. (k) Attach LED module lead to previously installed harness. 10. Light Guide Installation Passenger Side, No Cover Fig. 9-7 (a) To ease installation you may remove the glove box. This step is optional. (b) Using template marked passenger side catamount attachment, drill holes in tabs located under dash. Use punch or scribe. (c) Drill holes in under dash tabs using #21 drill. 1. Insert screw. (Fig. 10-1) Fig. 9-8 Fig Page 15 of 20 pages
16 2. Place spacer over screw. (Fig. 10-2) (d) Preassemble catamounts. 1. Insert cable through first catamount bracket (Fig. 10-3) 2. Thread cable tie into second catamount bracket. (Fig 10-4) Fig (e) Attach inner assembly as shown. (Fig. 10-5) Fig Fig Fig Page 16 of 20 pages
17 (f) Slide light guide into inner assembly. Position outer assembly and secure with screw. (g) Tighten inner cable tie, trim excess. (Fig. 10-6) Fig Fig Fig Fig (h) Attach 12 extension to LED module. (Fig. 10-7) 1. Route wire as shown. (Fig. 10-8) 2. Secure extension with foam pad. (i) Attach lead to previously installed harness. 11. Post Installation (a) Reinstall center console and shift knob. (b) Connect to console lighting. (c) Connect illumination switch leads, secure excess wire with 4 wire tie. (Fig. 11-1) (d) Reconnect connectors, reinstall switch panel. (e) Reconnect negative battery terminal and torque to 36 in/lbs. (f) Clean Light Guides using approved cleaner and a non-scratch cloth. (g) Cycle test the system with key in ACC or ON. The cycle may start from any step below but should cycle in this order. 1. All lights off. 2. Cup holder lights on only. 3. All lights on. 4. Floor lights on. 5. Back to step (1) Page 17 of 20 pages
18 Checklist - these points MUST be checked to ensure a quality installation. Check: Look For: Accessory Function Checks Single Un-operational Module or LED. Full engagement of affected LED Module to LED wire harness pigtail connector. Dislodged cup holder LED. No Operational Modules or LEDs Full engagement of all LED Module to LED wire harness pigtail connectors. Power connection. Ground connection. Switch connections. Blown light kit fuse. (2Amp, located under shift console) Blown cigarette lighter fuse. (see vehicle owners manual for amperage and location.) Vehicle Function Checks Cigarette Lighter Has the connector been re-connected? Blown fuse. (See vehicle owner s manual for amperage and location.) Page 18 of 20 pages
19 Page 19 of 20 pages
20 Page 20 of 20 pages
YARIS 4-DOOR 2007 INTERIOR LIGHT UPGRADE
Document # 3999 4/26/06 4-DOOR 2007 INTERIOR LIGHT UPGRADE Preparation Part Number: 00016-52060 Code: IL1 Kit Contents Item # Quantity Reqd. Description 1 1 12 Light Guide 2 1 7 Light Guide 3 1 Hardware
More informationSection II - Installation Procedures Part Number : Accessory Code IL1 Kit Contents. Color Applicability/Trim Level. Hardware Bag Contents
Document # 10.21.00 PIO/DIO 01/14/09 TOYOTA Rav-4 2009- INTERIOR InteriorLIGHT Light UPGRADE Upgrade Part Number : 00016-00065 Accessory Code IL1 Kit Contents Color Applicability/Trim Level Item # Quantity
More informationToyota Venza Interior Light Upgrade
Toyota Venza 2011 - Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White
More informationScion xb Interior Light Upgrade Part Number: Accessory Code: YI1
Scion xb 2008 - Interior Light Upgrade Part Number: 00016-00065 Accessory Code: YI1 Kit Contents Item # Quantity Reqd. Description 1 2 12 and 9 rod 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light Engines
More informationSCION xd INTERIOR LIGHTING UPGRADE Preparation
Preparation Part Number: PTS21-52085 Light Guide Kit Contents Item # Quantity Reqd. Description 1 1 Controller Board, 4 color programmed w/ Bracket 2 1 RGB, LED Engine wire harness 3 2 14mm Light Rod,
More informationToyota Prius Interior Light Upgrade
Toyota Prius 2012- Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light
More informationConflicts. Toyota Avalon Interior Light Upgrade. Part Number Accesory Code: IL2. Color Applicability/Trim Level.
Toyota Avalon 2011 - Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White
More informationTOYOTA AVALON INTERIOR LIGHT UPGRADE Section TOYOTA II - Installation AVALON Procedures
TOYOTA AVALON 2005 - INTERIOR LIGHT UPGRADE Section TOYOTA II - Installation AVALON Procedures 2007 Base Toyota Illumination Kit Part Number: 00016-00060 Accessory Code: IL1 Kit Contents Item # Quantity
More informationToyota Corolla Interior Light Upgrade
TOYOTA Corolla 2010 INTERIOR LIGHT UPGRADE Toyota Corolla 2012- Interior Light Upgrade Part Part Number #: xxxxx-xxxxxx 00016-0009500095 NOTE: Part number of this accessory may If not printing be the same
More informationDocument # 2506 Created 6/23/04 SCION tc INTERIOR LIGHT UPGRADE Preparation Part Number: (Amber) (Blue) Code: YI-1,YI-2
Document # 2506 Created 6/23/04 SCION tc 2005 - INTERIOR LIGHT UPGRADE Preparation Part Number: 00016-21010 (Amber) 00016-21020 (Blue) Code: YI-1,YI-2 General Applicability Kit Contents All Item # Quantity
More informationTOYOTA RAV4/HV INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT413-42130 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 20 Cable Tie 2 2 Scotchlok 3 2 Foam Pad
More informationSCION tc ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PTS21-21070 Kit Contents Item # Quantity Reqd. Description 1 2 Hardware Kit w/ power harness 2 1 Front Left Illuminated Door Sill Protector 3 1 Front Right Illuminated Door Sill
More informationLEXUS RC 350/RC-F ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT944-24150 Kit Contents Item # Quantity Reqd. Description 1 2 Inner LED Scuff 2 2 Outer Scuff 3 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description 1 15 20
More informationPart Number: PT
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA COROLLA ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT942-02140 Kit Contents Item # Quantity Reqd. Description 1 1 Illuminated Scuff plate, Front Right Hand 2 1 Illuminated Scuff plate, Front Left Hand 3 1 Door Scuff plate, Rear
More informationTOYOTA im INTERIOR LIGHT KIT Preparation
Preparation Part Number: PT922-12170 Kit Contents Item # Quantity Reqd. Description 1 1 Main Wire Harness 2 1 Switch 3 1 Switch Header 4 1 ECU 5 1 ECU Bracket 6 1 Hardware Kit 7 1 Instruction Card 8 1
More informationSCION xb AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA Yaris Hatchback EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 Auto Dimming Mirror Assembly w/ shift area light 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationSCION xb EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationSCION xb SIRIUS SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS3-52050 NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description Antenna, Exterior 2 Wire Harness 3 Bracket,
More informationTOYOTA PRIUS CONSOLE APPLIQUES Preparation
Preparation Part Number: PT948-47160-02 Kit Contents Item # Quantity Reqd. Description 1 1 Console Applique 2 1 Front Face Cover Applique 3 Hardware Bag Contents Item # Quantity Reqd. Description 1 2 3
More informationConflicts TOYOTA HIGHLANDER DUAL USB POWER DOCK. Part Number: Accessory Code:CP1000. Service Part Numbers.
Part Number: 00016-00222 Accessory Code:CP1000 Conflicts Note: Service Part Numbers Kit Contents Item # Quantity Req d Description 1 1 Dual USB Power Dock 2 General Applicability Hardware Bag Contents
More informationTOYOTA COROLLA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-02090 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ PRNDL 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 2 T-tap Connectors,
More informationTOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation
TOYOTA FJ CRUISER 2007 AUXILIARY LIGHTS Preparation Part Number: PT297-35061 Kit Contents Item # Quantity Reqd. Description 1 2 Driving Lamp Assembly 2 1 Switch Harness 3 1 Lamp Harness 4 2 Stone Shield
More informationScion xa SATELLITE RADIO TUNER Preparation
Preparation Part Number: PTS31-00051 Kit Contents Item # Quantity Reqd. Description 1 1 Antenna, Interior 2 1 Antenna Tape Pad 3 1 Wire Harness 4 1 Bracket, Floor 5 3 Hardware Bags 6 3 Templates 7 1 SIRIUS
More informationTOYOTA TACOMA XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-35090 Tuner Assembly 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item
More informationTOYOTA TACOMA EC REARVIEW MIRROR Preparation
Preparation Part Number: PT374-35052 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly 2 1 Hardware bag Hardware Bag Contents Item # Quantity Reqd. Description 1 1 T-tap Connectors,
More informationLEXUS GS 350/450h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-30120 (GS350) PT922-30130 (GS450h) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Req'd. Description 1 1 Illuminated
More informationConflicts: Vehicles with a sunroof
Toyota 4Runner Non/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit -00110-15, Beige 00016-00120; Fit Kit -00120-15, Gray Accessory Code: ED6 Conflicts: Vehicles with a sunroof Kit Contents:
More informationSCION FR-S CENTER ARMREST Preparation
Preparation Part Number: PT478 18130 Kit Contents Item # Quantity Reqd. Description 1 1 LH Bracket 2 1 RH Bracket 3 1 LH Extrusion 4 1 RH Extrusion 5 1 Slide Assembly 6 4 4.0mm PT (Torx) Screws 7 1 Armrest
More informationTOYOTA RAV INTERFACE KIT FOR IPOD Preparation Part Number: PT
Preparation Part Number: PT545-00082 NOTE: Part number of this accessory may not be the same as the part number shown. General Applicability Note: Kit Contents Item # Quantity Reqd. Description 1 1 Unit
More informationTOYOTA im NAVIGATION UPGRADE Preparation
Preparation Part Number: PT296-00170 PT296-12170 (Extension Module w/ AHA) Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna kit 5 6 Bolt
More informationSCION iq AUDIO Preparation
Preparation Part Number: PT546-00140 (Base Radio) Kit Contents Item # Quantity Reqd. Description 1 1 Receiver Assembly, Radio Unit 2 1 Hardware Bag Hardware Bag Contents Item # Quantity Reqd. Description
More informationTOYOTA YARIS XM SATELLITE RADIO Preparation (Sedan & Hatchback)
Preparation (Sedan & Hatchback) Part Number: Mounting Kit PT546-52096 Tuner Assy 86180-0W031 Tuner Assy Kit Contents (86180-0W031) Item # Quantity Reqd. Description 1 1 Tuner Assy, Stereo Component Mounting
More informationToyota 4RUNNER With/MR Overhead Video
Toyota 4RUNNER With/MR 2010-10.2 Overhead Video Part Number: 00016-00110; Fit Kit-00110-14, Beige 00016-00120; Fit Kit-00120-14, Gray Accessory Code: ED7 Conflicts: Vehicles without a sunroof Kit Contents:
More informationTOYOTA PRIUS XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-4700 Tuner Assy 8680-0W03 NOTE: Part number of this accessory may not be the same as the part number shown. Tuner Assembly Kit Contents (8680-0W03) Item # Quantity
More informationTOYOTA FJ CRUISER AIR DAM/LIGHT BAR Preparation
Preparation Part Number: PT278-35071 Kit Contents Item # Quantity Reqd. Description 1 1 Air Dam / Light Bar Hardware Bag 1 Contents Item # Quantity Reqd. Description 1 2 Screw, M6x33mm, Wafer Head 2 2
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationTOYOTA TACOMA INTERFACE KIT FOR IPOD Preparation
Preparation Part Number: PT545-00082 Kit Contents Item # Quantity Reqd. Description 1 1 Unit Assembly Kit 2 1 Mounting Kit 3 1 Hardware Bags 4 1 Unit and Fit Kit List 5 1 Owner s Manual Unit Assembly Kit
More informationTOYOTA HIGHLANDER RUNNING BOARD HIGHLANDER HV Preparation
Preparation Part Number: PT738-48080 Kit Contents Item # Quantity Reqd. Description 1 1 Driver Side Running Board 2 1 Passenger Side Running Board 3 4 /Middle Mount Bracket 4 2 Rear Mount Bracket 5 2 Rear
More informationTOYOTA TACOMA LED DRL Black-Out
TOYOTA TACOMA 2013 - LED DRL Black-Out Part Number: 00016-35021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 1 Driver Box 3 1 Harness bag
More informationTOYOTA SOLARA CONVERTIBLE XM SATELLITE RADIO Preparation. Part Number: Mounting Kit PT
Preparation Part Number: Mounting Kit PT546-06061 Tuner Assy 86180-0W030 Tuner Assy Kit Contents (86180-0W030) 1 1 Tuner Assy, Stereo Component Mounting Kit Contents (PT546-06061) 1 Ground Cable 1 1 Wire,
More informationSCION im PREMIUM AUDIO Preparation
SCION im 2016 - PREMIUM AU Preparation Part Number: PT296-12160 (Extension Module w/ AHA) Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2012 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationConflicts: Vehicles without a sunroof Vehicles with a single sunroof
Toyota Sienna (Dual Sunroof) 2011-10.2 Overhead Video Part Number: 00016-00110 00016-00110-17 Fit Kit 00016-00120 00016-00120-17 Fit Kit Accessory Code: ED5 Conflicts: Vehicles without a sunroof Vehicles
More informationTOYOTA Matrix XM SATELLITE RADIO Preparation
Preparation Part Number: Mounting Kit PT546-12080 Tuner Assembly 86180-0W031 (Music Only) Tuner Assembly PT546-00090 (Music Plus Data) NOTE: Part number of this accessory may not be the same as the part
More informationTOYOTA TACOMA XSP-X LED DRL. Part Number: Accessory Code: LDRL10
TOYOTA TACOMA 2013 - XSP-X LED DRL Part Number: 00016-35230 Accessory Code: LDRL10 Conflicts -None Kit Contents Item # Quantity Reqd. Description 1 2 LED DRL 2 1 Driver Box 3 1 Harness bag 4 Hardware Bag
More informationConflicts - Fog Lights
TOYOTA CAMRY 2013 - BLACKOUT LED DRL Part Number: 00016-32270 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver Box
More informationTOYOTA RAV FOG LIGHT KIT Preparation
Preparation Part Number: PT413-42163 Kit Contents Item # Quantity Reqd. Description 1 7 7 Wire Tie 2 4 #10-16 Cross Pan-Washer Head Screws 3 1 Switch 4 1 Relay 5 1 LH Fog Light Bezel 6 1 RH Fog Light Bezel
More informationPreparation Part Number: PT Kit Contents Item # Quantity Reqd. Description 1 1 Rear Spoiler 2 1 Hardware Kit. Hardware Bag Contents
Preparation Part Number: PT478-11170-09 Kit Contents 1 1 Rear Spoiler 2 1 Hardware Kit Hardware Bag Contents 1 4 M5 Nut 2 4 Clip 3 4 Hole Plug Additional Items Required For Installation 1 1 Outer Drill
More informationSCION xb HEADREST DVD RSE Section I Installation Preparation. Part Number: PT
Section I Installation Preparation Part Number: PT900-52080 Kit Contents Item # Quantity Reqd. Description 1 2 DVD Headrest Unit 2 2 Headrest Extension Cables 3 1 Audio Interface Module 4 1 Audio Interface
More informationLEXUS CT 200h ILLUMINATED DOOR SILLS Preparation
Preparation Part Number: PT922-89100 Kit Contents Item # Quantity Req'd. Description 1 1 Door Sill, Front Right Hand 2 1 Door Sill, Front Left Hand 3 1 Door Sill, Rear Right Hand 4 1 Door Sill, Rear Left
More informationTOYOTA PRIUS V LED DRL Black-Out
TOYOTA PRIUS V 2012 - LED DRL Black-Out Part Number: 00016-47021 Accessory Code:LDBO10 Conflicts Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver Box
More informationTOYOTA VENZA 2009 TRAILER WIRE HARNESS Procedure
Part Number: PT791-0T099 Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Wire Harness Module 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting Bracket, 4-Flat 5 2 Screw #10-24 6
More informationSCION FR-S FOG LIGHTS
Part #: PT413-18130 Conflicts: Lowering Springs PTR07-18130-LL (California only) Kit Contents: For Anniversary Edition, Monogram & RS 2.0 vehicles, additional parts need to be ordered (PT413-18130-LL)
More informationTOYOTA SIENNA TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT791-08150 (non-se) PT791-08102 (SE only) Kit Contents Item # Quantity Reqd. Description 1 1 Trailer Module Harness 2 1 4-Flat Harness 3 1 Battery Power Wire Harness 4 1 Mounting
More informationSCION XB HANDS FREE BLU LOGIC Preparation
SCION XB 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationScion xb EC Rearview Mirror w/ Shift Light Preparation
2008 - Preparation Part Number: 00016-79800 Accessory Code: YM10 Kit Contents Item # Quantity Reqd. Description 1 1 Mirror Assembly w/ PRNDL 2 1 Hardware bag 3 1 Installation Manual Hardware Bag Contents
More informationPart Number: Code: YU1 Kit Contents Item # Quantity Reqd. Description 1 1 RH Lamp Assy. 2 1 LH Lamp Assy.
Document # 3263 5/16/05 SCION tc 2005 - TAIL LIGHT ENHANCEMENT Preparation Part Number: 00016-21550 Code: YU1 Kit Contents 1 1 RH Lamp Assy. 2 1 LH Lamp Assy. 3 1 Hardware Bag Hardware Bag Contents 1 1
More informationConflicts: JBL Audio, Factory Navigation, Accessory XM Satellite Radio, and Accessory Sirius Satellite Radio
TOYOTA YARIS SEDAN 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 NOTE: Part number of this accessory may not be the same as the part number shown. Conflicts: JBL Audio, Factory Navigation,
More informationSCION xa AUTO-DIMMING MIRROR Preparation
Preparation Part Number: PT374-52040 (Compass) PT374-21050 (Homelink) Kit Contents Item # Quantity Reqd. Description 1a 1 AD Mirror Assembly w/compass & Map Lights (P/N PT374-52040) 1b 1 AD Mirror Assembly
More informationTOYOTA TUNDRA HANDS FREE BLU LOGIC Preparation
TOYOTA TUNDRA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationTOYOTA COROLLA HATCHBACK REAR SPOILER Preparation
Preparation Part Number: PT29A-12195-XX Kit Contents 1 1 Rear Spoiler 2 2 Hardware Bag Hardware Bag Contents 1 2 M6 Assembly Nuts 2 2 Grommet Inserts 3 1 Hole Plug Additional Items Required For Installation
More informationGeneral Applicability Note: Recommended Tools. Personal & Vehicle Protection Safety Goggles Seat Covers Floor Covers Special Tools. Installation Tools
TOYOTA HIGHLANDER/HIGHLANDER HV 2008- Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationSCION tc PREMIUM AUDIO Preparation. Part Number: PT (Extension Module w/ AHA)
Preparation Part Number: PT296-12160 Kit Contents Item # Quantity Reqd. Description 1 1 Extension Module 2 1 BT cable 3 1 DA/Ext Harness 4 1 GPS Antenna kit 5 6 Bolt (M5x8) 6 5 Wire tie (10 ) Hardware
More informationPart Number: Code: CM5
Document # 3899 2/20/06 SOUTHEAST TOYOTA CAMRY 2007 - EC MIRROR W/HOMELINK Preparation Part Number: 00016-07005 Code: CM5 Kit Contents 1 1 AD Mirror Assembly w/ HomeLink and Compass 2 1 Hardware bag 3
More informationCAMRY STRIP LED DRL TOYOTA Part Number: Accessory Code: LDRS10. PIO / DIO Rev. A 02/26/13. Doc
Doc. 02.126.00 TOYOTA CAMRY PIO / DIO Rev. A 2013-02/26/13 STRIP LED DRL Part Number: 00016-32280 Accessory Code: LDRS10 Conflicts - Only works on Camry SE Kit Contents Item # Quantity Reqd. Description
More informationTOYOTA CAMRY HANDS FREE BLU LOGIC Preparation
TOYOTA CAMRY 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationTOYOTA RAV FOG LIGHT
TOYOTA RAV4 2011 - FOG LIGHT Part Number: 00016-12013 Accessory Code: LF10 Conflicts - Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Lamp s bezels 3 1 Switch Assembly 4 1 Fog light
More informationPart Number: SFR-713. Hardware Bag Contents. General Applicability All models. Conflicts - Fog Lights. Date: SCION FRS LED DRL
Date: 01.30.2014 SCION FRS 2013-2015 LED DRL Part Number: SFR-713 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware
More informationTOYOTA TACOMA FOG LIGHT
TOYOTA TACOMA 2013 - FOG LIGHT Part Number: 00016-35220 Accessory Code: LF10 Conflicts - Factory Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Hardware bag 3 1 Switch Assembly
More informationTOYOTA TACOMA HANDS FREE BLU LOGIC Preparation. Item 5 Item 6 Item 7 Item 8. Item 4. General Applicability Note: Recommended Tools
TOYOTA TACOMA 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00098 Conflicts: JBL Audio, Factory Navigation Kit Contents: NOTE: Part number of this accessory may not be the same as the part number
More informationSCION tc 2005 LEATHER STEERING WHEEL Preparation. Part Number: (Silver/Dark Gray)
Preparation Part Number: 08460 21810 (Silver/Dark Gray) NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents Item # Quantity Reqd. Description 1 1 Steering Wheel
More informationTOYOTA VENZA HANDS FREE BLU LOGIC Preparation
TOYOTA VENZA 2009- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationSCION XB HANDS FREE BLU LOGIC Preparation. Item 4 Item 5 Item 6 Item 7. General Applicability. Note: Recommended Tools
SCION XB 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00090 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: Item 1 Item 2 Item
More informationSCION tc SECURITY (V5) Preparation
Preparation Part Number: PT398-21070 Kit Contents Item # Quantity Reqd. Description 1 1 2 1 GBS ECU Hardware Bag Contents Item # Quantity Reqd. Description 1 1 V5 Security ECU 2 1 ECU Mounting Bracket
More informationTOYOTA HIGHLANDER TRAILER WIRE HARNESS Preparation
Preparation Part Number: PT219-48111 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Flat 4-pin wire harness 3 5 Plastic tie 4 1 Special plastic tie for stud mount 5 1 Packing 6 2 Bolt
More informationTOYOTA SIENNA LED DRL Black-Out
TOYOTA SIENNA 2013 - LED DRL Black-Out Part Number: 00016-08021 Accessory Code: LDBO10 Conflicts - Fog Lights Kit Contents Item # Quantity Reqd. Description 1 2 DRL Housing 2 2 DRL s bezels 3 1 Driver
More informationTOYOTA tc HANDS FREE BLU LOGIC Preparation
TOYOTA tc 2011- HANDS FREE BLU LOGIC Preparation Part #: PT923-00111 Conflicts: JBL Audio, Factory Navigation NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents:
More informationLEXUS GX TOWING HITCH Preparation
LEXUS GX460 2014 - TOWING HITCH Preparation Part Number: PT228-60140 Kit Contents Item # Quantity Reqd. Description 1 1 Hitch Assembly 2 1 Wiring Harness Bracket 3 1 Hardware Bag 4 1 Hitch Cover 5 2 Center
More informationTOYOTA HIGHLANDER TVIP V2 (GBS ADD ON) Preparation
Preparation Part Number: 08586-48070 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 GBS ECU 3 1 ECU Mounting Bracket Hardware Bag Contents Item # Quantity Reqd. Description 1 1 Microphone
More informationSpecial Chemicals VDC approved cleaner. General Applicability All Scion iq models, including 10 Year Anniversary Edition.
Preparation Part Number: PT296-00140 or PT296-00142 (Extension Box w/aha) Kit Contents Item # Quantity Req. Description 1 1 Extension Module w/bt cable 2 1 DA/Ext Harness 3 1 GPS Antenna kit 4 4 Screws
More informationSCION FRS FOG LIGHTS. Part Number: SFR-313
Part Number: SFR-313 Kit Contents Item # Quantity Reqd. Description 1 2 Light Housings 2 2 Fog Light bezels 3 1 Harness bag 4 1 User s card 5 1 Switch 6 1 Fuse jumper Hardware Bag Contents Item # Quantity
More informationTOYOTA TACOMA TVIP V5
Preparation Part Number: PT398-35090 Kit Contents Item # Quantity Reqd. Description 1 1 Wire Harness 2 1 Security ECU 3 1 GBS ECU 4 1 Status Monitor/Microphone 5 2 Warning Labels (English) 6 2 Warning
More informationPart Number: T4R-2IN1
Date: 12.11.2014 TOYOTA HIGHLANDER 2015 LED Fog Light & DRL 2in1 Part Number: T4R-2IN1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4 1 User
More informationTOYOTA RAV TRAILER WIRE HARNESS Section I Installation Preparation
Section I Installation Preparation Part Number: 08921-42900 Kit Contents Item # Quantity Reqd. Description 1 1 Converter 2 1 Wire harness 3 1 Sub wire harness No.1 4 2 Plastic Tie (300mm) 5 21 Plastic
More informationTOYOTA PRIUS C FOG LIGHT
TOYOTA PRIUS C 2012 - FOG LIGHT Part Number: 00016-47160 Accessory Code: LF10 Conflicts NONE Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 2 Fog Lamp s bezels 3 1 Switch Assembly 4 1 Fog
More informationTOYOTA COROLLA FOG LIGHT
Doc. 03.69.00 PIO / DIO Rev. C 10/11/12 TOYOTA COROLLA 2012 - FOG LIGHT Part Number: 00016-32118 Accessory Code: LF10 Conflicts - Factory code PM on model 1838 Kit Contents Item # Quantity Reqd. Description
More informationPart Number: TTA-712. Hardware Bag Contents. General Applicability All models
Date: 09.30.2013 TOYOTA TACOMA 2012-15 LED DRL Part Number: TTA-712 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Switch Hardware
More informationSCION XB SUBWOOFER ENCLOSURE Preparation
Preparation Part Number: Kit Contents Item # Quantity Reqd. Description 1 1 Subwoofer enclosure 2 1 Wire Harness 3 1 Paper Template 4 1 Plastic Drill Template 5 1 Hardware Bag Hardware Bag Contents 1 Item
More informationPart Number: TCA-712SE
Date: 09.04.2013 TOYOTA CAMRY SE 2012-14 LED DRL Part Number: TCA-712SE Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Cushion
More informationPart Number: T4R-2N1. Hardware Bag Contents. General Applicability. Conflicts - Limited Models
Date: 12.11.2014 TOYOTA HIGHLANDER 2014-2016 LED Fog Light & DRL 2 in 1 Part Number: T4R-2N1 Kit Contents Item # Quantity Reqd. Description 1 2 DRL + Fog Light Housing 2 1 Driver Box 3 1 Harness bag 4
More informationTOYOTA TACOMA FOG LIGHT
Date: 10.31.2013 TOYOTA TACOMA 2012-15 FOG LIGHT (Halogen or LED) Part Number: TTA-312 Kit Contents Item # Quantity Reqd. Description 1 2 Fog Lamps 2 1 Switch Assembly 3 1 Fog light operation guide 4 1
More informationPart Number: TAV-713. Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL. Hardware Bag Contents.
Date: 09.04.2013 TOYOTA AVALON 2013 - LED DRL Part Number: TAV-713 Kit Contents Item # Quantity Reqd. Description 1 2 DRL s bezels w/led DRL 2 1 Driver Box 3 1 Harness bag 4 1 User s card 5 1 Cushion pad
More informationTOYOTA CAMRY EC REARVIEW MIRROR Preparation
TOYOTA CAMRY 2010 - EC REARVIEW MIRROR Preparation Part Number: 00016-09101 Code: CM9 Kit Contents Item # Quantity Reqd. Description 1 1 AD Mirror Assembly w/ Compass 2 1 Hardware bag Hardware Bag Contents
More informationSCION TC HANDS FREE BLU LOGIC Preparation
SCION TC 2008- HANDS FREE BLU LOGIC Preparation Part #: PT923-00099 Conflicts: JBL Audio NOTE: Part number of this accessory may not be the same as the part number shown. Kit Contents: For kits manufactured
More informationTOYOTA HIGHLANDER FOG LIGHTS Preparation Part Number: PT , BLACK Part Number: PT , ALUMINIZED
Preparation Part Number: PT413-42191, BLACK Part Number: PT413-42190, ALUMINIZED Kit Contents Item # Quantity Reqd. Description 1 1 RH Fog Light 2 1 LH Fog Light Hardware Bag Contents Item # Quantity Reqd.
More informationSCION tc Navigation System Preparation. Part Number: PT
Preparation Part Number: PT611-21111 Kit Contents Item # Quantity Reqd. Description 1 1 Navigation System 2 1 GPS Antenna 3 1 Bluetooth Antenna 4 1 Wire Harness (Reverse / Park Brake) 5 1 RCA Relay Cable
More informationTOYOTA 4-RUNNER TOWING HITCH Preparation
Preparation Part Number: PT228-89460 Kit Contents 1 1 High Assembly 2 1 Wiring Harness Bracket 3 1 Hardware Bag 4 1 Hitch Cover 5 2 Frame Spacer 6 2 Center Spacer 7 1 Close-out Panel Hardware Bag Contents
More information