FEATURES SPECIFICATIONS FSV-2, FSS, FLY SERIES ULTRASONIC FLOWMETER < > DATA SHEET. Operational specifications. EDSX6-142b. Flow transmitter (FSV S)

Transcription

1 SERIES ULTRSONI FLOWMETER < > T SHEET FSV-2, FSS, FL This flowmeter is a clamp-on type ultrasonic flow meter based on transit-time measuring method. Making full use of the latest electronics and digital signal processing technologies, we realized a compact and lightweight design, and improved the accuracy and easiness to use while keeping with anti-bubble performance. The communication function (MOBUS: Option) is also applicable. FETURES. High accuracy The flowmeter is designed for high accurary (better than ±.0% of rate) by dynamic correction of fully-developed flow profile. Reynolds Number is calculated and a meter factor (K) is automatically applied for best accuracy at all flow velocities. Further, the adoption of new sound velocity measurement system permits measurements of fluids of unknown sound velocity. Moreover, affection from fluid temperature and pressure is negligible (uto-temp./ Press. compensation). 2. Excellent resistance against aerated flow Fuji s unique BM feature improves measurement reliability for different flow like slurries, sludge, raw sewage and bubble-contained flow (acceptable up to air bubble of 2% volume at m/s velocity). 3. ompact and light-weight Thanks to the adoption of the latest electronics the flow transmitter size and mass are /3 of our traditional instrument. 4. Full variety of sensors The flowmeter can be used with various types of sensors applicable for wide range of pipe size (ø3 to ø6000mm) and fluid temperature (-40 to +200 ). 5. Quick response With the use of high-speed micro-processor suited for digital signal processing, the fast response time is realized. 6. Multi-lingual The following languages are supported for display: Japanese (Katakana), English, German French, and Spanish. 7. Excellent performance and easy operation L and function keys are allowing easy configuration and trouble shooting. L with back light Easy mounting of sensor Extendable rail type detector up to ø50 to ø200mm Trouble shooting Easy operation with keypad on the front surface of the flow transmitter (FSV S) SPEIFITIONS Flow transmitter (FSV S) etector (FSS) etector (FSS) Operational specifications System configuration: Single-path system of a flow transmitter (Model FSV) and a detector (Model FSS) pplicable fluid: Homogenous liquid where the ultrasonic signal can be transmitted Bubble quantity: 0 to 2vol% (for pipe size 50, water, velocity m/s) Fluid turbidity: 0000mg/L max. Type of flow: Fully-developed turbulent or laminar flow in a full-filled pipe Flow velocity range: 0 to ± ±32m/s Power supply: 00 to 240V +0%/-5%, 50/60Hz; or 20 to 30V ESX6-42b ate Oct. 9, 202

2 FSV-2, FSS, FL Signal cable (between detector and converter): oaxial cable (50m max.) applicable up to 300m depending on the condition. Heat resistance: 80 Installation environment: Non-explosive area without direct sunlight, corrosive gas and heat radiation. mbient temperature: Flow transmitter: -20 to +55 etector: -20 to +60 mbient humidity: Flow transmitter: 95%RH max. etector: 90%RH max. Grounding: lass (00 Ω) rrester: as standard at power supply pplicable piping and fluid temperature: <table > etector Type FSS FSS Pipe size (inner diameter) mm ø25 to ø225 mm ø50 to ø200 pplicable pipe material Plastic (PV, etc.) (Note ) Metal pipe (SS, steel pipe, copper pipe, aluminum pipe, etc.) (Note 2) How to mount and judge the pipe diameter V method ø25 to ø225 V method ø50 to ø600 Z method ø600 to ø200 Fluid temperature range -20 to +00 (Note3) -40 to +20 (Note3) Note) Please select the FSS type if following condition. When pipe material is PP or PVF, limit of pipe wall thickness is 5mm or more for PP, 9mm or more for PVF When pipe material is hard to penetrate the ultrasonic wave such as cast-iron pipe, lining pipe and old carbon steel pipe etc.., Llining material is tar epoxy, mortar and rubber etc.. In case lining is removed from the pipe, Measurement can not be conducted Note2) When silicon grease is used as acoustic coupler, Fluid temperature limit is 0 to 60 no matter what detector is selected. Note3) Heat-resistant shock temperature: for 30 minutes at 50 Note4) Please refer to the item 9 for the specification of the special detector (for small diameter pipe,large diameter pipe and high temperature) Performance specifications Rated accuracy: <table 2> etector Type Pipe size (diameter) mm Flow velocity (m/s) ccuracy Plastic pipe Metal pipe FSS ø25 to ø50 2 to 32m/s ±2.0% of rate 0 to 2m/s ±0.04m/s ø50 to ø225 2 to 32m/s ±.0% of rate ±2.0% of rate 0 to 2m/s ±0.02m/s ±0.04m/s FSS ø50 to ø200 2 to 32m/s ±.5% of rate 0 to 2m/s ±0.03m/s ø200 to ø200 2 to 32m/s ±.0% of rate 0 to 2m/s ±0.02m/s Note) Please refer to the item 9 for the specification of the special detector (for small diameter pipe, large diameter pipe and high temperature) Response time: 0.5s (standard mode) 0.2s as selected (quick response mode) Power consumption: 5V max. ( power supply) 6W max. ( power supply) Functional specifications nalog signal: 4 to 20m ( point) Load resistance: 600Ω max. igital output: Forward total, reverse total, alarm, acting range, flow switch, total switch assignable arbitrarily Transistor contact (isolated, open collector) Outputs: 2 points Normal: ON/OFF selectable ontact capacity: 30V, 50m Output frequency: 000P/s max. (pulse width: 5, 0, 50, 00, 200, 500, 000ms) Serial communication (option): RS-485 (MOBUS), isolated, arrester incorporated onnectable quantity: 3 units Baud rate: 9600, 9200, 38400bps Parity: /Odd/Even selectable Stop bits: or 2 bits selectable able length: km max. ata: Flow velocity, flow rate, forward total, reverse total, status, etc. isplay device: 2-color LE (Normal: green, Extraordinary: red) L with 2 lines of 6 characters and back light Indication language: Japanese (Katakana)/English/French/ German/Spanish (changeable) Flow velocity/flow rate indication: Instantaneous flow velocity, instantaneous flow rate indication (minus indication for reverse flow) Numerals: 8 digits (decimal point is counted as digit) Unit: Metric/Inch system selectable Metric system Inch system Velocity m/s ft/s Flow rate L/s, L/min, L/h, L/d, kl/d, gal/s, gal/min, gal/h, gal/d, ML/d, m 3 /s, m 3 /min, m 3 /d, kgal/d, Mgal/d, ft 3 /s, ft 3 / km 3 /d, Mm 3 /d, BBL/s, min, ft 3 /d, Kft 3 /d, Mft 3 /d, BBL/min, BBL/h, BBL/d, BBL/s, BBL/min, BBL/h, kbbl/d, MBBL/d BBL/d, kbbl/d, MBBL/d Note: The gal means USgal. Total indication: Forward or reverse total value indication (negative indication for reverse direction) Numerals: 8 digits (decimal point is counted as digit) Unit: Metric/Inch system selectable Metric system Inch system Total ml, L, m 3, km 3, Mm 3, mbbl, BBL, KBBL gal, kgal, ft 3, kft 3, Mft 3, mbbl, BBL, kbbl, RE-ft onfiguration: Fully configurable from the 4-key pad (ES,,, ENT) Zero adjustment: Set zero/lear available amping: 0 to 00s (every 0.s) for analog output and flow velocity/flow rate indication Low flow rate cutoff: 0 to 5m/s in terms of flow velocity larm: igital output available for Hardware fault or Process fault Burnout: nalog output: Hold/Overscale/Underscale/Zero selectable 2

3 Flow rate total: Hold/ount selectable Burnout timer: 0 to 00s (every s) Bi-directional range: Forward and reverse ranges configurable independently. Hysteresis: 0 to 0% of working range Working range applicable to digital output uto-2 range: 2 forward ranges configurable independently Hysteresis: 0 to 0% of working range Working range applicable to digital output Flow switch: Lower limit, upper limit configurable independently igital output available for status at actuated point Total switch: Forward total switching point configurable igital output available when actuated External total preset: Preset total settable upon contact input setting Backup of power failure: backup by non-volatile memory Physical specifications Type of enclosure: Flow transmitter: FSV S: IP66 FSV H: IP67 (With large L) etector: FSS, FSS: IP65 (When waterproot BN connector is provided) FSS,FSS: IP65 (When water-proof type connector is fitting) FSS (waterproofing): IP68 (submerged resistant structure for 5days) Mounting method: Flow transmitter: Mounted on wall or by 2B pipe etector: lamped on pipe surface coustic coupler: coustic coupler is a filling between detector and pipe. Type of acoustic coupler: <table 3> Type Fluid temperature Teflon piping Silicone rubber (KE-348W) Silicone grease (G40M) Silicone-free grease (HIGH Z) -40 to to to +60 In case of Teflon piping, use grease. Grease for high temperature (KS62M) -30 to +250 Signal cable: Structure: Heat-resisting high-frequency coaxial cable Sheath: Flame-resisting PV Outer diameter: ø7.3mm Terminal treatment <table 5> able type pplicable detector FL FSS, FSS Terminal of flow transmitter side Rod terminal 2 mplifier terminal (M3) Terminal of detector side BN connector mplifier terminal (M4) Please refer to the item 9 for the specification of the special detector * (for small diameter pipe, large diameter pipe and high temperature) imension, Mass: <table 6> Type imensions Mass.(kg) Flow FSV S (IP66) H70 W42 70mm.5 transmitter FSV H (IP67) H277 W244 96mm 4.5 etctor FSS H50 W348 34mm 0.4 FSS H88 W480 53mm Signal cable FL ø7.3mm 90g/m Please refer to the item 9 for the specification of the special detector * (for small diameter pipe, large diameter pipe and high temperature) External terminal of flow transmitter: plug terminal P Loader software as standard ompatible model is P/T compatible instrument. Operation is undefined for P98 series (NE). Main functions: Software for Main unit parameter setting/ change on P OS: Windows 2000/XP or Windows 7 (Home Premium, Professional) Memory requirement: 25MB min. isk unit: -ROM drive compatible with Windows 2000/ XP or Windows 7 (Home Premium, Professional) Hard disk capacity: Minimum vacant capacity of 52MB or more Note: Optional communication board (specified at the 5 th digit of code symbols). Note: ommunication converter For tne P that supports RS-232 serial interface, RS RS-485 converter is needed for connecting the P and main unit. For the P that does not support RS-232 serial interface, additionally, USB - RS232 converter is also needed. <Recommendation> [RS RS-485 converter] R-770X(manufactured by SSMEX R) [USB - RS-232 converter] USB-VRS9 (manufactured by SNW SUPPL) Material: Flow transmitter: luminum alloy etector: <table 4> etector Type Sensor housing Guide rail FSS PBT SUS304 FSS PBT luminum alloy Please refer to the item 9 for the specification of the special detector * (for small diameter pipe, large diameter pipe and high temperature) 3

4 FSV-2, FSS, FL MESURING PRINIPLE With ultrasonic pulses propagated diagonally between the upstream and downstream sensors, flow rate is measured by detecting the time difference obtained by the flow of fluid. etector θ Flow velocity Upstream sensor ownstream sensor Output signal t t 2 Flow transmitter ONFIGURTION IGRM () Single-path system (V method) etector Signal able Flow transmitter (2) Single path system (Z method) 4 to 20m igital signal (Up to 2 point) MOUNTING OF ETETOR Ultra sonic oscillator Plastic wedge Pipe Lining etector Signal able Flow transmitter 4 to 20m igital signal (Up to 2 point) onditions on straight pipe ( : Inside diameter of pipe) lassification Upstream side ownstream side L 5 90 bend 0 or more L 0 etector Tee 0 or more L 50 L 0 0 or more 0.5 or more L 30 L 5 iffuser.5 L 0 L 50 Reducer L 30 L 0 Various Valve Pump In case that flow control valve exists on upstream side. Stop valve heck valve P In case that flow control valve exists on downstream side. L 50 (Note) The source : JEMIS-032 4

5 OE SMBOL <Flow transmitter> F S V 2 escription E 4 S H B B (estination) (4th digit) Standard (English) (ommunication) (5th digit) RS485 (Use) (6th digit) Single measuring path (Power supply) (7th digit) 00 to 240V 50/60Hz 20 to 30V (ase structure) (9th digit) IP66 IP67 (Wire connection port) (0th digit) Weatherproof gland provided [G/2 and G3/8 (internal threads)] Union (for pilica) with gland [G/2 female screw] (when "H" is specified 9th digit) (ombination with explosion-proof detector) (th digit) (Parameter setting) (2th digit) Setting provided Setting provided + tag Tag (Mounting method) (3th digit) Pipe mount (if the 9th digit is S) Wall mount Pipe mount (if the 9th digit is H) <etector> F S S B escription <Senser type>(4th digits) ø50 to ø200mm <Guide rail>(5th digits) (Extendable rail type) <Mounting belt>(6th digits) *2 Stainless belt (.0m 2) SS belt fasten with screws (.0m 4) Wire ø500mm <coustic coupler> (7th digit) Silicon rubber (KE348) Silicone-free grease (HIGH-Z) Silicone grease (G40M) <Watwe-proof treatment>(9th digit) (with signal cable 0m) <Tag plate> (0th digit) *2) Please refer to the table 8 to serect the mounting belt at 6th digits. [Table 8] How to select at 6th digits. Mounting method ø300mm ø600mm ø200mm V method or Z method Explanation of the extendable rail type detector Unextended condition <etector> F S S B escription <Senser type> (4th digits) ø25 to ø225mm (V method) <Guide rall> (5th digits) <Mounting belt> (6th digits) Stainless belt (.0m 2) <coustic coupler> (7th digit) (Note 2) Sillicon rubber Sillicon-free grease Silicon grease - <Tag plate> (0th digit) available pipe diameter up to ø50 to ø300mm <V method> Extended condition available pipe diameter up to ø600mm <V method> Installation of the supplied rail end. Note : Normally select silicone rubber as acoustic coupler. Silicone rubber in tube (00g) is furnished. If you place an order for several units, tube may suffice for every 5 units. Select silicone-free grease for semiconductor manufacturing equipment or the like that is vulnerable to silicone. The silicone-free grease is water-soluble and, therefore, cannot be used in environment exposed to water or on piping subjected to a condensation. Since the grease does not set, a periodic maintenance (cleaning, refilling every about 6 months at normal temperature) is necessary. available pipe diameter up to ø200mm <Z method> Belt appearance for attachment of the detector. Stainless belt SS belt fasten with screws wire 5

6 FSV-2, FSS, FL F L escription Z Z Z Type of sensor (4th digit) for FSS, FSS, FSS, FSSH able length (5,6 and 7th digit) 5 m 0 m 5 m 20 m 25 m 30 m 35 m 40 m 45 m 50 m 55 m 60 m 65 m 70 m 75 m 80 m 85 m 90 m 95 m 00 m 0 m 20 m 30 m 40 m 50 m Others (contact us) Note) When detector is FSS, length of signal cable is up to 60m. 6

7 ES ENT Ultrasonic Flow Meter OUTLINE IGRM (Unit:mm) U bolt (M8) (option) Mtg. plate Mtg. hole U bolt (M8) (option) Mtg. holes2-ø (233) TIME ELT- 25 Mtg. pipe SS tag (option) able gland Earth terminal (M4) 53 Bracket (option) Mtg. pipe Earth terminal (M4) For sensor cable (PF3/8) For power supply & output cable (PG3.5) Flow transmitter : FSV S (IP66) 39 For power supply & output cable (PF/2) Flow transmitter : FSV H (IP67) For sensor cable (PF/2) 480 ±2 SPING: 0 to 300 SS tag (option) inch mm 348 mm inch 30 (50) Scale (inch) BN ONN. Scale (mm) Lock nut 53 Sensor 54 88max. BN connector Frame Lock clip Rail end Tag plate Name plate Extended rail <Shipment style (V method)> Guide rail (880) Spacing (djustable every 3mm) 700max. 400max. 240 mm inch mm inch etecter : Type FSS Extended rail <Extended style (Longest, V method)> 5.5 ø3.2 L (cable length (m) : specified by order) ø7.3 ø Bar terminal To Flow transmitter To etector Signal cable : Type FL ø4.5 BN connector Rail end (ccessories) <Sepalate style (Z method)> etecter : Type FSS 7

8 FSV-2, FSS, FL ONNETION IGRM <Flow transmitter> <etector> Earth terminal (M4) power supply power supply Option L N FG + FG SG 2 3 B+ G + 00 to 240V 50/60Hz 20 to 30V RS-485 To flow transmitter GN 8 HF 9 0 GN HF2 O TR out O2 TR out Max. 30V, 50m I out SH SH To downstream-side sensor To upstream-side sensor Usable wiring material Wire Gauge: WG20 (0.5mm 2 ) to WG6 (.5mm 2 ) Strip-off length: 0mm WG20 to WG6 0mm Bar terminal Weidmüller 0 ø to.7 SOPE OF ELIVER 6 Flow transmitter (provided with U-bolt and nuts for pipe mount) etector (provided with mounting fixture and acoustic coupler) * The acoustic coupler is option for popular type detectors. Signal cable -ROM (contains instruction manual, loader software) ITEMS ESIGNTE ORERING ø2.6 to 3.5. etector code symbols 2. Flow transmitter code symbols 3. Signal cable code symbols 4. Tag No. as necessary 5. If parameter setting is specified, send back the attached parameter specification table duly filled. OPTIONL ESSORIES Name rawing No. Silicone grease (G40M) ZZP*4523N5 2 Silicone rubber (KE348W) ZZP*45735N2 3 Silicone-free grease (HIGH-Z) ZZP*TK7M098P hecked items before purchase Following conditions may cause failure of the measurement or to reduce the accuracy by this flow meter. Please consult and ask Fuji Electric for checking with actual equipment previously if you have hard to judge the appropriate application. )Fluid If fluid contains a large amount of bubbles (approx. 2vol% or more at m/s flow rate) If fluid has bad turbidity 0000(mg/L) or more, If fluid contains slurry or solid materials (about 5wt%) If flow rate is low Reynolds No.0000 or less, (reference: flow rate 5m 3 /h with ø00mm) If it is circulating oil, liquid medicine of low concentration, waste liquid and hot spring, 2)Pipe If inside pipe is rusty carbon steel pipe, If inside pipe having adhering substances and sediment If outer surface of cast-iron pipe is rough, If pipe wall is tick such as ruinous pipe, (PP material 5mm or more, PVF material 9mm or more) If it is SGPW pipe, If lining pipe is removed from pipe, If it is rubber pipe, 3) Length of the straight pipe For accurate measurement, straight pipes are needed between up and down stream side of the measuring part. Please meet the straight pipe conditions according item4. aution on use ) o not damage the sensor or signal mounted on the pipe. 2) Make sure to fill the fluid inside the pipe to measure. 3) When you use horizontal pipe, it is recommended to install the sensor horizontally. 4) When you use the grease as acoustic coupler to install the sensor for outdoor use, it is recommended to install the waterproof cover to prevent from the degradation. 8

9 etector for special application ) detector for small diameter type Pipe size: ø3 to 00mm Fluid temperature: -40 to 00 Type: FSS - Specification Sensor frequency: 2MHz Mounting method: V method Fluid temperature: -40 to 00 pplicable pipe material: PV, SS, carbon steel pipe, copper pipe, aluminum pipe, etc. [In case lining is removed from the pipe, Measurement can not be conducted] Rated accuracy of combination with the flow transmitter (pplicable piping: plastic, metal pipe) Internal diameter Velocity ccuracy (mm) ø3 ø50 2 to 32m/s ±.5% to ±2.5% of rate 0 to 2m/s ±0.03 to ±0.05m/s ø50 ø00 2 to 32m/s ±.0% of rate 0 to 2m/s ±0.02m/s Mounting belt: according to specified code of symbol. Material: PBT, guide rail: aluminum alloy + plastic Type of enclosure: IP52 coustic coupler: according to specified code of symbol. Mass: 0.6kg OE SMBOL <etector> F S S B escription <Senser type>(4th digits) ø3 to ø00mm <Guide rail>(5th digits) <Mounting belt>(6th digits) Stainless belt (.0m 2) SS belt fasten with screws (.0m 4) <coustic coupler> (7th digit) Silicon rubber (KE348) Silicone-free grease (HIGH-Z) Silicone grease (G40M) <Watwe-proof treatment>(9th digit) <Tag plate> (0th digit) 5.5 OPTIONL ESSORIES Name Sillicon grease (GM40M) Sillicon rubber (KE348W) Sillicon-free grease (HIGH-Z) OUTLINE IGRM (unit: mm) <etector> ø3.2 istance between two sensors 0 to 33 Scale (inch) ursor inch mm 52.5 Scale (mm) 90 max. onnector Lock nut Element holder Small diameter sensor: FSS L (cable length (m) : specified by order) ø7.3 rawing No. ZZP*4523N5 ZZP*45735N2 ZZP*TK7M098P Saddle ø F L escription Z Z Z Type of sensor (4th digit) for FSS, FSS, FSSH, FSS able length (5,6 and 7th digit) 5 m 0 m 5 m 20 m 25 m 30 m 35 m 40 m 45 m 50 m 55 m 60 m 65 m 70 m 75 m 80 m 85 m 90 m 95 m 00 m 0 m 20 m 30 m 40 m 50 m Others (contact us) Scope of delivery etector, acoustic coupler and set of the mounting belt according to specified code of symbol Signal cable according to specified code of symbol 30 Bar terminal To Flow transmitter To etector Signal cable : FL ø4.5 BN connector 9

10 FSV-2, FSS, FL etector for special application 2) detector for high temperature Pipe size: ø50 to 400mm Fluid temperature: -40 to 200 Type: FSSH - Specification Sensor frequency: 2MHz Mounting method: V method (ø50 to 250mm) or Z method (ø50 to 400mm) Fluid temperature: -40 to 200 pplicable pipe material: PV, SS, carbon steel pipe, copper pipe, aluminum pipe,etc. [In case lining is removed from the pipe, Measurement can not be conducted] Rated accuracy of combination with the flow transmitter (pplicable piping: plastic,metal pipe) Internal diameter Velocity ccuracy (mm) ø50 ø300 2 to 32m/s ±.0% of rate 0 to 2m/s ±0.02m/s ø300 ø to 32m/s ±.0% of rate 0 to 0.75m/s ±0.0075m/s Mounting belt: according to specified code of symbol. Material: sensor housing: SUS304 guide rail: SUS304 + aluminum alloy Type of enclosure: IP52 coustic coupler: according to specified code of symbol. Mass:.6kg OPTIONL ESSORIES Name Guide rail for high-temperature sensor (Z method) High-temperature grease(ks62m) OUTLINE IGRM (unit: mm) <etector> Scale(inch) istance between two sensors 0 to 330 onnector Scale(mm) Saddle Name plate Lock nut rawing No. ZZP*TK4J5973 ZZP*TK7G ±2 OE SMBOL <etector> F S S H H escription <Senser type>(4th digits) ø50 to ø400mm (-40 to 200 ) <Guide rail>(5th digits) <Mounting belt>(6th digits) Stainless belt (.0m 2) SS belt fasten with screws (.0m 4) <coustic coupler> (7th digit) High-temperature grease (KS62M) <Watwe-proof treatment>(9th digit) <Tag plate> (0th digit) F L escription Type of sensor (4th digit) for FSS, FSS, FSSH, FSS Z Z Z able length (5,6 and 7th digit) 5 m 0 m 5 m 20 m 25 m 30 m 35 m 40 m 45 m 50 m 55 m 60 m 65 m 70 m 75 m 80 m 85 m 90 m 95 m 00 m 0 m 20 m 30 m 40 m 50 m Others (contact us) ø26 ursor Element holder 33±0.5 90max. 205max. Scope of delivery etector, acoustic coupler and set of the mounting belt according to specified code of symbol Signal cable according to specified code of symbol L (cable length (m) : specified by order) 44± 5.5 ø3.2 ø7.3 ø 0 High-temperature sensor: FSSH 30 Bar terminal To Flow transmitter To etector Signal cable : FL ø4.5 BN connector

11 etector for special application 3) detector for large diameter type Pipe size: ø200 to 6000mm Fluid temperature: -40 to 80 Type: FSSE - Specification Sensor frequency: 0.5MHz Mounting method: V or Z method Fluid temperature: -40 to 80 pplicable pipe material: PV, SS, carbon steel pipe, copper pipe, aluminum pipe,etc. In case lining is removed from the pipe, Measurement * can not be conducted lso applicable to water-proof type according to specified code of symbol (submerged resistant structure for 5days including 0m cable) Rated accuracy of combination with the flow transmitter (pplicable piping: plastic, metal pipe) Internal diameter Velocity ccuracy (mm) ø200 ø300 2 to 32m/s ±.5% of rate 0 to 2m/s ±0.03m/s ø300 ø to 32m/s ±.5% of rate 0 to 0.75m/s ±0.03m/s ø000 ø6000 to 32m/s ±.0% of rate 0 to m/s ±0.02m/s Mounting belt: according to specified code of symbol. Material: Sensor housing PBT, Sensor cover SUS304 Type of enclosure: IP67 (silicon rubber is filled up on the terminal block when connecting work) coustic coupler: according to specified code of symbol. Mass:.2kg OPTIONL ESSORIES Name Wire rope for mounting the sensor Spring Wire rope (up to ø500mm) Wire rope (up to ø000mm) Wire rope (up to ø500mm) Wire rope (up to ø3000mm) Wire rope (up to ø6000mm) Sillicon grease (GM40M) Sillicon rubber (KE348W) Sillicon-free grease (HIGH-Z) OUTLINE IGRM (unit: mm) <etector> Name plate rawing No. ZZP*TK745007P ZZP*TK ZZP*TK ZZP*TK ZZP*TK ZZP*TK ZZP*4523N5 ZZP*45735N2 ZZP*TK7M098P OE SMBOL <etector> F S S E E E B escription <Senser type>(4th digits) ø200 to ø6000mm <Guide rail>(5th digits) <Mounting belt>(6th digits) Wire ø500mm Wire ø6000mm <coustic coupler> (7th digit) Silicon rubber (KE348) Silicone-free grease (HIGH-Z) Silicone grease (G40M) <Watwe-proof treatment>(9th digit) (with signal cable 0m) <Tag plate> (0th digit) F L escription Type of sensor (4th digit) for FSSE Z Z Z able length (5,6 and 7th digit) 5 m 0 m 5 m 20 m 25 m 30 m 35 m 40 m 45 m 50 m 55 m 60 m 65 m 70 m 75 m 80 m 85 m 90 m 95 m 00 m 0 m 20 m 30 m 40 m 50 m Others (contact us) 78± Sensor ø3.2 L (cable length (m) : specified by order) ø7.3 ø 84± 67± 4 Wire rope Mounting spring Scope of delivery etector, acoustic coupler and set of the mounting belt according to specified code of symbol Signal cable according to specified code of symbol ø9 5.5 Large sensor: FSSE Bar terminal To Flow transmitter Signal cable : FL 30 To etector 3-ø4.3 8

12 FSV-2, FSS, FL <Parameter specification table> Setting item Initial value Setting value Setting item Initial value Setting value I No 0000 Total mode Stop Language English Total rate 0m 3 System unit Metric Total preset 0m 3 Flow unit m 3 /h Pulse width 50.0msec Total unit m 3 Burnout (total) Hold Outer diameter 60.00mm Burnout timer 0sec Pipe material PV pipe O output type (Note ) Not used Wall thickness 4.00mm O output actuation ON when actuated Lining material Without lining O2 output type Not used Lining thickness O2 output actuation ON when actuated Kind of fluid Water Operation mode Standard Viscosity m 2 /s Sensor mount V metod Sensor type FSS amping 5.0sec ommunication mode RS-485 ut off 0.50m 3 /h Baud rate 9600bps st line Flow velocity (m/s) Parity Odd st line decimal point position ****.*** Stop bit bit 2nd line Flow rate (m 3 /h) Station No. 2nd line decimal point position ****.*** Range kind Flow rate Range type Single range Full scale 5.000m 3 /h Full scale m 3 /h Range HS. 0.00% Burnout (current) Hold Burnout timer 0sec Output low limit -20% Output high limit 20% Rate limit 0.000m 3 /h Rate limit timer 0sec Measuring conditions Output conditions isplay nalog output Note: When total pulse output has been selected for O, O2 specify total pulse value and total pulse width so that conditions and 2 shown below are satisfies. ommunication Output conditions Total output ondition : Flow span-*[m 3 /s] total pulse value*[m 3 ] 00[Hz] ondition 2 : Flow span-*[m 3 /s] total pulse value*[m 3 ] total pulse width [ms] * In the case of 2 ranges, perform calculations using either flow span- or flow span-2, whichever is greater. aution on Safety *Before using this product, be sure to read its instruction manual in advance. International Sales iv Sales Group Gate ity Ohsaki, East Tower, -2, Osaki -chome, Shinagawa-ku, Tokyo , Japan Phone: , 728 Fax: Information in this catalog is subject to change without notice. Printed in Japan