1000 Series MASSMAX. Coriolis Mass Flowmeter Straight Twin Tube OUTLINE FEATURES STANDARD SPECIFICATIONS. Fluid Specifications

Transcription

1 MSSMX Series Coriolis Mass Flowmeter Straight Twin Tube OUTLINE MSSMX series is the coriolis mass flowmeters developed on the theme of the straight tube model which is excellent in cost performance. The straight measuring tube, designed on the basis of integrated know-how of the field experiences and customer s requirements, allows self-cleaning of the tube and low pressure loss with the high allowable pressure of the outer cylinder. The meter enjoys high-quality, safety and good cost performance. The wetted parts are made of stainless steel and the outer cylinder of the measuring tube has the pressure proof of 6.3MPa. Four sizes from 5 to 5mm in diameter are available. MSSMX series can be applied to wide application from small flow to large flow. FETURES Self-cleaning, low pressure loss and low cost application igh accuracy: ±.% of reading (+ Zero stability) Safe design of stainless steel cylinder with dual structure (Maximum working pressure: 6.3MPa) pplicable to chemical and petrochemical services which require safety. pplicable to the food and pharmaceutical industries with the sanitary ferrule connection (3 approved) One meter can measure the mass flow rate (both instantaneous and totalized), density and temperature at the same time. The converter, either integrated mounted with detector or separately mounted, is available. TEX explosion proof and TIIS* explosion proof types are provided. STNDRD SPECIFICTIONS Measurement principle : Coriolis force : 5, 5, 4, 5mm Measuring range Max. nominal flow rate Min. flow rate kg/h 4,8 48, 6, 6 5, 5 Max. nominal flow rate Min. flow rate kg/min ,,83.83 Dust and waterproof : IP66/67 (IEC 659) mbient temperature : 4 to +55 C (Integrated mounted version) 4 to +6 C (Separately mounted detector and converter itself) * Refer to the SPECIFICTIONS OF EXPLOSION PROOF TYPE for the ambient temperature range of explosion proof type. Fluid Specifications Measuring fluid : Liquids Fluid temperature Connection type Flange type Sanitary ferrule Fluid pressure 5 Temperature 4 to +3 C to +3 C Pressure Fluid temp. C MPa 5 MPa 4 MPa 5 MPa * Pressure means the maximum working pressure of the sensor tube. * Refer to the FLUID PRESSURE-TEMPERTURE TBLE shown on the another page of this guidance for details. * Maximum working pressure must be within the limits of the flange or fitting rating. Fluid density : 4 to 5kg/m 3

2 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter Sensor Specifications Process connection Flange ; JISK/K R.F., SME class 5/3 R.F., Others Sanitary fittings ; ISO85 Ferrule, Others (Option) Material Wetted parts : Wetted parts Sensor tube Flow splitter Flange Material Stainless steel (UNS S383) * Equivalent to JIS SUS39J3L Stainless steel (SS36L) Stainless steel (SS36L) Non-wetted parts : Outer cylinder ; Stainless steel (SS34L) Converter mount and Front end housing ; Stainless steel (SS36L) Outer cylinder : 6.3MPa at C (Standard) pressure rating MPa at C (Option) Converter Specifications Cylinder material Painting : luminum alloy (Option: SS36L) : Siloxane coating Color : Grey (Converter housing), Jade green (Converter cover / Terminal box cover) Power supply : to 3V C (85 to 53V) Option; 4V DC (9 to 3V) ( ) indicates voltage range Power supply : 48 to 63 z frequency Power consumption : C ; approx. 8V, DC ; approx. W Grounding : Grounding resistance must be less than Ω for Non-Ex. version Ω for Ex. version Cable Entry : G/ female adapters or / NPT female adapters or G/ Flame proof adapters cable glands (applied for TIIS explosion proof ) * Maximum 3 cable entries are available. Indication and Output Specifications Indicator : Blue, dot matrix LCD (With backlight) 8 64 pixels (59 3mm) Indication function : Changeable from maximum 4 screens The Indication data are displayed in one to three lines on one screen. Contents of indication ; Instantaneous mass flow rate(bar graph display), Totalized mass flow rate, Instantaneous volume flow rate, Totalized volume flow rate, Density, Temperature, Flow rate trend graph (percent representation), Setting data and Self-diagnostic indication, etc. Instantaneous mass flow rate : Unit (kg/h, kg/min, kg/sec, t/h, Others) Flow direction normal or reverse, is displayed by + or. Totalized mass flow rate : Unit (kg, t, g, Others) Totalized flow of normal or reverse direction Density display : Unit (g/cm 3, kg/m 3, Others) Temperature display : Unit ( C, Others) Current output : 4 to m DC (Max. m) When power is supplied internally : Load resistance (Less than ohms) When power is supplied externally : External voltage (Less than 3V DC) Pulse output : Open collector output Load rating : 3V DC, m or less ( kz) m or less ( kz) Output frequency : Max. kz Pulse rate : to 36,, pulse/h (.56z to kz) Pulse width : One of the following selectable ) utomatic ; Pulse width by which duty factor to be 5% at full scale ) Duty factor ; : fixed 3) Free setting ;.5 to m/s : Open collector output Load rating : 3V DC, m or less m or less ( kz) Contents of output : One of the following selectable: ) No status output (Standard factory setting) ) Identification of flow direction 3) Over range 4) Totalization preset 5) Identification of range (For double range measurement) 6) Error / Other various measurement alarms (Flow rate, Density, Temperature, etc.) TOKYO KEISO CO., LTD. TG-EM65E-8

3 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter Control input Voltage input : Low ; to.5v DC igh ; 9 to 3V DC Contents : ) No control input (Standard factory setting) ) old output signal 3) Lock output signal to % 4) Reset totalized counter 5) Reset error 6) Select range (For double range measurement) 7) Others Output combination Standard output : Current output 4 to m Pulse output Control input Total - 4 points Option : Current output 4 to m Pulse output Total - 3 points Option : Current output 4 to m 3 Pulse output Total - 4 points Option 3 : Current output 4 to m Pulse output or Pulse output (Selectable at site) Total - 4 points * Refer to Output of converter specification code. Low flow cutoff : Current output, Pulse output, Separate setting per each indication is possible Setting value :. to.% FS Standard setting value: Current output, Pulse output ; ON %, OFF 3% FS Damping time constant : Current output, Pulse output, Separate setting per each indication is possible Setting value :. to. s Standard setting value: Current output, Indicator ; 3 s Pulse output ; s Standard Specifications rbitrary flow measuring units can be set freely as a standard function : The measuring units of mass flow rate, volume flow rate and time can be built up using the maximum 7 letters. Bi-directional flow measurement function : Regular or reverse flow is measurable flow-direction distinction signal is given in status output. Self diagnosis function : The following status of errors and operating conditions are indicated as error message ; Functional diagnosis : CPU, Memory, Software, ard, and Output connection Status diagnosis : Over range, Counter over, and Power fail detection pplication diagnosis : Oscillating balance of sensor tube, Vibrating energy, and Diagnosis of sensor circuit. Memory save function at power failure : Operation parameters and totalized figures are stored for more than years by EEPROM (Non volatile memory). Testing function : Simulating output function for current and pulse is available. Loop check can be made without calibrator. Touch sensor setting function (Infrared radiation) : By four infrared sensors, data setup from exterior is possible without removing cover. TG-EM65E-8 TOKYO KEISO CO., LTD. 3

4 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter ccuracy (Calibrated at the factory) Mass flow (Pulse output) ccuracy Zero stability ±.% of reading ±.5% of nominal flow rate * Reference conditions : Fluid; Water, Temp. C, Press..MPa [Measurement error] (ccuracy + Zero stability) Measuring error (±% of reading) % of max. nominal flow rate % 5% % % 5% % Flow rate (% of max. nominal flow rate) Measuring error ( ± of reading) * % or less of the max. nominal flow rate (less than minimal flow rate) is out of prescribed accuracy range. Influence by process condition : Temperature effect ; ±.75% of the maximum nominal flow rate per C Pressure effect ; ±.5% of the maximum nominal flow rate per.mpa The influence of the above shows the case where a process condition changes after zero point adjustment. Density (Indicated value) pplicable meter size 5, 5, 4, 5 Measuring range ccuracy calibrated at the factory * ( 5, 4, 5) ccuracy calibrated at the factory * ( 5) 4 to 5 kg/m 3 kg/m 3 5 kg/m 3 * Calibration at the factory is conducted as customers requests. EXPLOSION PROOF TYPE TIIS (Technology Institute of Industrial Safety in Japan) () Compact type (Integrated type sensor and converter) Model : MMM3C-JEx Type of protection and class : Ex d [ib] llc T3 Sensor : Ex ib llc T3 Converter : Ex d [ib] llc T3 Certified No. : No. TC84 No. TC84 mbient temperature : to +5 C Fluid temperature : to +3 C (T4) TEX [EU TEX directive (94/9/EC)] Compact type Temperature class T4 T3... T T4... T Separate sensor Temperature class T4 T3... T Separate converter Temperature class T4... T Max. fluid temperature mbient temperature 7 C 3 C +5 C 55 C +55 C Max. fluid temperature mbient temperature 89 C 3 C +65 C mbient temperature 4 to +65 C Fluid Pressure Temperature Table Pressure (MPa) Sensor tube and Outer cylinder (Option) DIN636 PN63 Outer cylinder (Standard) DIN636 PN4 JISK JISK Temperature ( C) Temperature (Indicated value) Measuring range ccuracy 4 to +3 C ± C 4 TOKYO KEISO CO., LTD. TG-EM65E-8

5 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter NME OF EC PRT PROCESS CONNECTION [Integrated type] Flange connection Cable entry Sensor Standard Semi-standard Option Equiv. to JIS * Equiv. to SME Equiv. to JIS / SME * Power supply Front end 5 5 K /" class5 5 K " class5,3,6 Input / Output ESC Converter 5 5 K " class5 4 K -/" class5,3,6 4 4 K -/" class5 5 K " class5,3,6 5 5 K " class5 8 K 3" class5,3,6 * JISK flange is commonly used for JIS K to K 4 flange as standard. (Installation dimensions of JISK flange are equal to JISK except the flange thickness.) Outer cylinder FLOW RNGE Max. nominal flow rate kg/h kg/min 4,8 8, 333 6,, 5,,83 Flange llowable max. flow rate kg/h kg/min 6,4 4 6, 433 7,,3 6,5,78 Sanitary fitting (Option) 5 Fitting " ISO 85 Ferrule (equivalent to IDF ferrule) 5 -/" ISO 85 Ferrule (equivalent to IDF ferrule) 4 " ISO 85 Ferrule (equivalent to IDF ferrule) 5 3" ISO 85 Ferrule (equivalent to IDF ferrule) SENSOR TUBE DIMENSIONS Material Sensor tube dimensions (mm) Inside diameter Wall thickness 5 S S S S The sensor tube is consisted of a straight twin tubes (two measurement pipes) as shown in the following figure. TG-EM65E-8 TOKYO KEISO CO., LTD. 5

6 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter ELECTRICL CONNECTION [Converter Input/Output Terminals] MMC3C/F Current output, Pulse output,, Control input, as standard + B B C C D D N L (L) (L+) Output wire connection figure of optional case Module I/O PCB Converter specification Terminal Polarity Option Option Option 3 Current outputs 3 Current outputs Current outputs Pulse or (68) Pulse or (6) Pulse or (6E) D D + Pulse or Pulse or Pulse or C Current output No. Current output No. Current output No. (Internal power (Internal power (Internal power C + supply) supply) supply) B Current output No. Pulse or (Internal power B + supply) + Current output No. Current output No.3 Current output No. (Internal power (Internal power (Internal power + supply) supply) supply) [Separate Type Sensor Cable] MMSF + MMC3F The protection cover is provided for power supply terminals. Power supply terminal cover Converter MMC3F side B + Terminal connector Shield earth Grip for cable fixing (for Earth) Cable gland Terminal Description L / L+ N / L Terminal L+ (+) L () (C power supply / DC power supply) Grounding Description (standard) Polarity Sensor cable (Exclusive use) 4-cores compound cable :.5mm Finished outer diameter : pprox. mm Maximum Length : 3m D D Pulse output or + C C + B B or Control input + Cable gland Current output + (4 to m DC / Internal + power supply) Current output (4 to m DC / Internal power supply) Current output (4 to m DC / External power supply) + Grip for cable fixing Terminal block B + Detector MMSF side Spring clamp terminal.5 to.5mm applicable cable : 7 to mm Terminal type : Plug-in type screw terminal pplicable electric wire :.5 to.5mm Outer diameter of applicable cable : 7 to mm 6 TOKYO KEISO CO., LTD. TG-EM65E-8

7 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter DIMENSIONS Integrated Type (MMM3C) with Flange Connections (G) ϕd 98.5 L Dimensions (mm) L 3 D Weigh (pprox. kg) Dimension L is the length for the flanges of standard specifications.. Dimension and indicate dimensions from the bottom of the outer cylinder. 3. Dimension G Separate Type Converter (MMC3F) (G) ESC 4 inch pipe (Supplied by customers) 6 4 Grounding terminal (M5) 4 (6) R U bolt for inch pipe mount (Supplied by the option) Weight of the converter : pprox. 5.8kg Dimension G TG-EM65E-8 TOKYO KEISO CO., LTD. 7

8 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter Separate Type Detector (MMSF) with Flange Connections (6) ϕd L Dimensions (mm) L 3 D Dimension L is the length for the flanges of standard.. Dimension and indicate dimensions from the bottom of the outer cylinder. Weigh (pprox. kg) 8 TOKYO KEISO CO., LTD. TG-EM65E-8

9 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter DIMENSIONS Integrated Type (MMM3C) with Sanitary Fittings (G) ϕd L Dimensions (mm) L D Weigh Dimension G Separate Type Detector (MMSF) Sanitary Fittings (6) ϕd L Dimensions (mm) Weigh L 3 D (pprox. kg) TG-EM65E-8 TOKYO KEISO CO., LTD. 9

10 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter MODEL ND SPECIFICTION CODE Sensor Tube Material: S (Stainless steel UNS S383) [Standard] Model : Integrated type Separate type detector ; MMSF-S ; MMM3C-S Integrated EX. type ; MMM3C-EEx/JEx-S Separate EX. type detector ; MMSF-EEx/JEx-S Separate type converter ; MMC3F Separate EX. type converter ; MMC3F-EEx/JEx * : code (5... 5) EEx : TEX explosion proof type JEx : TIIS explosion proof type [Detector specification code] Detector spec. code TK Detector code TK (Fixed code) Sensor tube material Sensor tube internal surface finish Process connection (Fixed code) Outer cylinder material eating jacket Type of explosion proof Sanitary approvals Type Calibration Degrease treatment Special feature 4 S Description MMS detector (Twin tube type) always 4 S Stainless steel UNS S383 Standard Polished internal Ra =.8m U 5 JISK Flange V 5 JISK Flange W 4 JISK Flange XG 5 JISK Flange YG 8 JISK Flange KD /" SME class 5 Flange KE /" SME class 3 Flange KF /" SME class 6 Flange LD 3/4" SME class 5 Flange LE 3/4" SME class 3 Flange LF 3/4" SME class 6 Flange MD " SME class 5 Flange ME " SME class 3 Flange MF " SME class 6 Flange ND -/" SME class 5 Flange NE -/" SME class 3 Flange NF -/" SME class 6 Flange PD " SME class 5 Flange PE " SME class 3 Flange PF " SME class 6 Flange RD 3" SME class 5 Flange RE 3" SME class 3 Flange RF 3" SME class 6 Flange MT " ISO85 Ferrule (IDF) NT -/" ISO85 Ferrule (IDF) PT " ISO85 Ferrule (IDF) RT 3" ISO85 Ferrule (IDF) G B Std. : Standard : Semi-standard : Option always Stainless steel 34L Stainless steel 36L Stainless steel 34L llowable pressure: 6.3MPa at C approved by PED Stainless steel 36L llowable pressure: 6.3MPa at C approved by PED Stainless steel 36L llowable pressure: MPa at C approved by PED Nil eating jacket ir purge connection (/ NPT Female) Nil TEX explosionproof TIIS explosionproof Nil EEDG (European ygienic Equipment Design Group) 3 (merican Dairy pproval) SME Bioprocessing Equipment Standard Version Integrated type Separate type (luminum terminal box) Separate type (Stainless terminal box) Calibration Standard (3 points flow calibration) 5 points flow calibration 3 points flow calibration + Density calibration B 5 points flow calibration + Density calibration Nil Degrease treatment for wetted parts (Blank) Nil /Z Involved TOKYO KEISO CO., LTD. TG-EM65E-8

11 MSSMX Series Straight Twin Tube / Coriolis Mass Flowmeter [Converter specification code] MMC3C/F Converter spec. code TK 5 4 Converter code TK 5 MMC3 converter (Fixed code) 4 always 4 Version 4 Power supply Explosionproof pproval Language for indication (fixed code) Converter housing Output and input Sensor cables 9 Cable entries for input and output, and power supply (fixed code) Measuring valuables (fixed code) Special requirements *: In case that special feature are involved, put [/Z] at the end of specification code and specify the details. It is recommended to consult TOKYO KEISO for such availability before ordering. Description Version Integrated type Separate type to 3 V C (85 to 53 V) 4 V DC (9 to 3 V) Nil TEX explosionproof TIIS explosionproof With / NPT female adapter for TEX explosionproof With G/ female adapter M.5 female With G/ flameproof packing adapter for TIIS explosionproof English always luminum alloy Stainless steel SS36L (for integrated type) Stainless steel SS36L (for separate type) always 4 to m, Pulse,, control input to m, Pulse to m, Pulse 6 E 4 to m, Pulse, or Pulse (lternative) Standard (Mass flow rate, Density, Temperature) always Nil (Integrated type or supplied by customer) With m cable (For separate type) With 5m cable (For separate type) 3 With 5m cable (For separate type) (Blank) Nil / Z Involved Std. STNDRD CCESSORIES Instruction manual : * Specification is subject to change without notice. ead Office : Shiba Toho Building, 7 4 Shibakoen, Minato-ku, Tokyo Tel : (KEY) ; Fax : overseas.sales@tokyokeiso.co.jp ; URL : TG-EM65E-8 TOKYO KEISO CO., LTD.