List of Figures. Hot Drink Center Parts Manual. Figure Title Page

Transcription

1

2 List of Figures Figure Title Page 1. Hot Drink Center Merchandiser Trim Components Trim - Millennia Style (Part 1 of 3) Trim - Millennia Style (Part 2 of 3) Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly Trim - Nestlé Full P.O.P Door Assembly (Part 1 of 2) Door Assembly (Part 2 of 2) Miscellaneous Mounted Parts - Door Assembly Nestlé Style - Full P.O.P. - Door Assembly - Interior Coin Receptacle Assemblies Door Lock Assembly Door Lock and Handle Assembly - Standard Trim and Nestlé Full POP Style Millennia Door Lock and Handle Assembly Automatic Delivery Door Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles) Display Assembly - Part 1 of 2 (Standard and Millennia Style) Display Assembly - Part 2 of Door Hinge Assemblies Mech and Canister Assembly - 11 Column Turret and Canister Assembly - 4 Column Turret and Canister Assembly - 7 Column Mechanism Assembly Cup Ring Assembly Actuator Assembly - Cup Ring Mounting Bracket Assembly - Right Cabinet Assembly - Outer Layer Cabinet Assembly - Inner Layer Cabinet Assembly - Miscellaneous Mounted Parts Leg, Leveler, and Leg and Hinge Assemblies Cup Delivery Assembly Cup Station Support, Overflow Switch, and Cup Sensor Overflow Switch Assembly Filter Paper Housing and Cover Service Light/Bracket Assembly - U.S Air Compressor Assembly - U.S Monetary Panel Assembly (Part 1 of 3) Monetary Panel Assembly (Part 2 of 3) Monetary Panel Assembly (Part 3 of 3) Monetary Inserts Card Reader and Bill Validator Options Monetary Channel Power Panel Assembly (Brazil/U.S.) Single Brewer Assembly (No Filter) Single Brewer Assembly (With Filter) Dual Brewer Assembly (No Filter) Dual Brewer Assembly (With Filter) Barrel Assembly - Single Brewer Barrel Assembly - Dual Brewer i

3 Figure Title Page 50. Rack Assembly - Single Brewer Rack Assembly - Dual Brewer Paper Mechanism Assembly - Single Brewer Paper Mechanism Assembly - Dual Brewer Brewer Drive Assembly Brewer Exhaust Filter Locator and Bracket Assembly Mixing Bowl Ventilation Assembly Rear Vent Assemblies Bracket, Blower, and Cover Assembly Vent Assembly - Front Water Supply - With Everpure Water Filter Option Water Supply - With Cuno Water Filter Option Water Supply - With Hydrolife Option Water Supply - Without Water Filter Option Hot Water Tank Assembly Water Tank Lid Assembly Bean Window Assemblies Dual Bean Window Assembly Single Bean Window Assembly - U.S Canister Usage Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Grinder and Bracket Assembly - Bean Grinder Asembly - Bean Canister Support Channel Assembly Regulator Assembly Mixing Bowl and Whipper Positions Mixing Bowl and Whipper Assemblies Canister Motor and Plate Assemblies Product and Condiment Chutes (Part 1 of 2) Product and Condiment Chutes (Part 2 of 2) Wiring Harnesses Liquid Distribution and Drain System (Part 1 of 2) Liquid Distribution and Drain System (Part 2 of 2) Base Plate Accessory - Standard Style Base Plate Accessory - Millennia Style Ingredient Drain Tray Accessory Door Lock Guard Accessory ii

4 List of Tables Table Title Page 1. Hot Drink Center Merchandiser Trim Components A. Top Trim Panel (Index Number 5) B. Right Hand Trim Panel (Index Number 11) C. Right Center Trim Panel (Index Number 12) D. Bottom Trim Panel (Index Number 15) E. Left Center Trim Panel (Index Number 17) F. Left Hand Trim Panel (Index Number 18) G. Signature Series Trim Components Trim - Millennia Style (Part 1 of 3) Trim - Millennia Style (Part 2 of 3) Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly Trim - Nestlé Full P.O.P Door Assembly (Part 1 of 2) Door Assembly (Part 2 of 2) Miscellaneous Mounted Parts - Door Assembly Nestlé Style - Full P.O.P. - Door Assembly - Interior Coin Receptacle Assemblies Door Lock Assembly Door Lock and Handle Assembly - Standard Trim and Nestlé Full POP Style Millennia Door Lock and Handle Assembly Automatic Delivery Door Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles) Display Assembly - Part 1 of 2 (Standard and Millennia Style) Display Assembly - Part 2 of Door Hinge Assemblies Mech and Canister Assembly - 11 Column Turret and Canister Assembly - 4 Column Turret and Canister Assembly - 7 Column Mechanism Assembly Cup Ring Assembly Actuator Assembly - Cup Ring Mounting Bracket Assembly - Right Cabinet Assembly - Outer Layer Cabinet Assembly - Inner Layer Cabinet Assembly - Miscellaneous Mounted Parts Leg, Leveler, and Leg and Hinge Assemblies Cup Delivery Assembly Cup Station Support, Overflow Switch, and Cup Sensor Overflow Switch Assembly Filter Paper Housing and Cover Service Light/Bracket Assembly - U.S Air Compressor Assembly - U.S Monetary Panel Assembly (Part 1 of 3) Monetary Panel Assembly (Part 2 of 3) Monetary Panel Assembly (Part 3 of 3) Card Reader and Bill Validator Options A. Monetary Location Options B. Coin Mech Options - Dumb iii June, 1999

5 Table Title Page 41C. Coin Mech Options - MDB D. Bill Validator Options - Serial E. Bill Validator Options - Pulse F. Bill Validator Options - MDB G. Card Readers Monetary Channel Power Panel Assembly (Brazil/U.S.) Single Brewer Assembly (No Filter) Single Brewer Assembly (With Filter) Dual Brewer Assembly (No Filter) Dual Brewer Assembly (With Filter) Barrel Assembly - Single Brewer Barrel Assembly - Dual Brewer Rack Assembly - Single Brewer Rack Assembly - Dual Brewer Paper Mechanism Assembly - Single Brewer Paper Mechanism Assembly - Dual Brewer Brewer Drive Assembly Brewer Exhaust Filter Locator and Bracket Assembly Mixing Bowl Ventilation Assembly Rear Vent Assemblies Bracket, Blower, and Cover Assembly Vent Assembly - Front Water Supply - With Everpure Water Filter Option Water Supply - With Cuno Water Filter Option Water Supply - With Hydrolife Option Water Supply - Without Water Filter Option Hot Water Tank Assembly Water Tank Lid Assembly Bean Window Assemblies Dual Bean Window Assembly Single Bean Window Assembly - U.S Canister Usage Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Canister Assembly Grinder and Bracket Assembly - Bean Grinder Asembly - Bean Canister Support Channel Assembly Regulator Assembly Mixing Bowl and Whipper Positions Mixing Bowl and Whipper Assemblies Canister Motor and Plate Assemblies A. Motor Position Usage Product Delivery Chute Assembly Usage A. Delivery Chute Parts B. Delivery Chute Parts Wiring Harnesses iv June, 1999

6 Table Title Page 88. Usage Key For Bulk Tubing Liquid Distribution and Drain System (Part 1 of 2) Liquid Distribution and Drain System (Part 2 of 2) A. Bulk Tubing for Interconnecting Water Valves, Mixing Bowls, and Dispensing Spouts Base Plate Accessory - Standard Style Base Plate Accessory - Millennia Style Ingredient Drain Tray Accessory Door Lock Guard Accessory Money Box lock accessory Bag Assembly B Nestlé Bag Assembly B v June, 1999

7 SOFTWARE VERSION & UPGRADE INFORMATION Hot Drink Center Parts Manual NOTES... Software # Machine s/n Date ?? Main Controller PCB P/N Replaced By P/N In All PIE Based Equipment. This is the Surface Mount Version Of The Previous Controller July 29, 2005 UPGRADE - KIT INFORMATION Auto Door Kit p/n available for machines with s/n , , , or and lower. In production on units with higher serial numbers than listed here. PART NUMBER DURA-PANEL KIT INFORMATION DESCRIPTION KIT - DURA-PANEL (BLACK) HOTDRINK CENTER - (Models 65X) KIT - DURA-PANEL (BLACK) HOT DRINK CENTER - (Models 637, 635, 633) KIT - DURA-PANEL (BLACK) EURO BEV - (Models 634, 636) KIT - DURA-PANEL (BLACK) HOTDRINK CENTER - (Models 62X) vi June, 1999

8 GFCI PLUG USAGE MACHINE MODEL DESCRIPTION PART NO. 159, 160, 167, 168, 172, 173, 181, 452, 457, 490, 764, 765, 784, 797, 839, ,493, 673, 675, 677, 942, 943, volt - 15amp - 18/3 AWG Strandwire volt - 20amp - 12/3 AWG Strandwire , 451, 475, 480, 623, 670, 674, 780, 962, 972, 684, volt - 15amp - 14/3 AWG Strandwire Machines Manufactured Previous to April 10th, 2007 are not required to have a GFCI Plug. Disconnecting, Removing, or Relocating the GFCI Plug Voids Machine Warranty.

9 CRANE NATIONAL VENDORS Hot Drink Center Parts Manual TABLE 1. HOT DRINK CENTER MERCHANDISER INDEX PART NUMBER DESCRIPTION QTY 1 - CABINET ASSEMBLY (SEE FIGURES 27, 28, 29) DOOR ASSEMBLY (SEE FIGURES 7, 8) BASE PLATE ASSEMBLY (SEE FIGURES 91, 92) OPT. G OOD VALUE 1 X Y Z p0055 Figure 1. Hot Drink Center Merchandiser

10 Section C: Cabinet Snack/Ref. Center II Parts Manual This Page Intentionally Left Blank May 2005

11 Figure 2. Trim Components

12 TABLE 2. TRIM COMPONENTS INDEX PART NUMBER DESCRIPTION QTY TRIM-DOOR-TOP & BOTTOM-BLACK TRIM INSERT-BLACK TRIM-DOOR-HORIZ-CLEAR TRIM INSERT-BLACK PANEL - TOP TRIM (SEE TABLE 2A) TRIM DOOR-SIDE-BLACK-IBM TRIM - VERTICAL CASTING - MONETARY FRAME - BLACK SCREW #6-32 X 1/4 PHS, T/C, PHILLIPS TRIM - HORIZONTAL - GLASS FRAME - CUP DELIVERY DOOR TRIM PANEL - RIGHT HAND (SEE TABLE 2B) TRIM PANEL - CENTER - RIGHT (SEE TABLE 2C) TRIM - COIN CUP - BLACK TRIM - FILLER TRIM PANEL - BOTTOM (SEE TABLE 2D) EDGE PROTECTOR TRIM INSERT-BLACK TRIM-DOOR-HORIZ-CLEAR TRIM PANEL - CENTER - LEFT (SEE TABLE 2E) TRIM PANEL - LEFT HAND (SEE TABLE 2F) T-BOLT - TRIM - 3/8" (NOT SHOWN) T-BOLT - TRIM - 1/2" (NOT SHOWN) 7 DURA-PANEL KIT INFORMATION CLICK HERE TABLE 2A. TOP TRIM PANEL (INDEX NUMBER 5) PART NUMBER DESCRIPTION PRESIDENTIAL WALNUT SPECIAL FORMICA TEAK VINYL SPECIAL VINYL BLACK HAIRCELL NU-WHITE STERLING VINYL WHITE HAIRCELL DOVE GREY SLATE BLACK PICA

13 TABLE 2B. RIGHT HAND TRIM PANEL (INDEX NUMBER 11) PART NUMBER STERLING BLACK HAIRCELL BLACK PICA COMPOSTITION OAK DOVE GREY LAMINATE NU WHITE PEWTER PORT AU PRINCE PRESIDENTIAL WALNUT SLATE TEAK SPECIAL VINYL WHITE HAIRCELL DESCRIPTION TABLE 2C. RIGHT CENTER TRIM PANEL (INDEX NUMBER 12) PART NUMBER DESCRIPTION STERLING DOVE GREY NUWHITE TEAK WHITE HAIRCELL TABLE 2D. BOTTOM TRIM PANEL (INDEX NUMBER 15) PART NUMBER DESCRIPTION STERLING - DEBIT/VER - NO COIN MECH STERLING BISON BLACK BLACK HAIRCELL BLACK PICA BLANK COMPOSITION OAK DOVE GREY LAMINATE NU WHITE PEWTER PRESIDENTIAL WALNUT SLATE TEAK SPECIAL VINYL WHITE HAIRCELL

14 TABLE 2E. LEFT CENTER TRIM PANEL (INDEX NUMBER 19) PART NUMEBR STERLING DOVE GREY NU-WHITE TEAK WHITE HAIRCELL DESCRIPTION TABLE 2F. LEFT HAND TRIM PANEL (INDEX NUMBER 20) PART NUMBER PORT-AU-PRINCE COMPOSITION OAK PRESIDENTIAL WALNUT STERLING DOVE GREY NU-WHITE TEAK BLANK LAMINATE PEWTER SPECIAL VINYL SLATE WHITE HAIRCELL BLACK HAIRCELL BLACK PICA MOROCCO GREY DESCRIPTION

15 Figure 3. Trim - Millennia Style (Part 1 of 3)

16 TABLE 3. TRIM - MILLENNIA STYLE (PART 1 OF 3) Hot Drink Center Parts Manual INDEX PART NUMBER DESCRIPTION QTY DOOR WELD ASSEMBLY - BLACK FILLER - GROOVE - SHORT RIGHT PANEL - MONETARY & BUTTON ASSEMBLY (SEE FIGURE 5) RIGHT HAND TRIM - LOWER - "B DECAL - DOOR TRIM - VERTICAL ASSEMBLY TRIM - UPPER - LEFT HAND - "C" TRIM - MIDDLE - LEFT HAND - "D" TRIM - BOTTOM - LEFT HAND - "E" TRIM - LOWER - DOOR SIDE - GRAY

17 Figure 4. Trim - Millennia Style (Part 2 of 3)

18 TABLE 4. TRIM - MILLENNIA STYLE (PART 2 OF 3) Hot Drink Center Parts Manual INDEX PART NUMBER DESCRIPTION QTY HORIZONTAL TRIM - TOP - 38" - "H HORIZONTAL TRIM - TOP - BLACK DECAL - DOOR TRIM - HORIZONTAL - 38" (NOT SHOWN) (USED WITH INDEX 1) DECAL - TRIM - HORIZONTAL BLACK (NOT SHOWN) (USED WITH BLACK TRIM - INDEX 1) GLASS - CURVED FRONT " - H.D.C GASKET - GLASS HORIZONTAL TRIM - R1 - UPPER HOT DRINK PANEL - BOTTOM TRIM - GRAY

19 Figure 5. Trim - Millennia Style (Part 3 of 3) - Monetary and Button Assembly

20 TABLE 5. TRIM - MILLENNIA STYLE (PART 3 OF 3) - MONETARY AND BUTTON ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY R.H. TRIM - UPPPER - "A ARRAY - PUSH BUTTON SELECTION SPRING - PUSH BUTTON SELECTION PLATE - STOP BUTTON RETAINER - RETURN BUTTON COIN RETURN BUTTON - "A SPACER CUP EXTENSION - COIN INSERT COIN BLOCK COIN INSERT - "A

21 Figure 6. Trim - Nestlé Full P.O.P

22 TABLE 6. TRIM - NESTLÉ FULL P.O.P. INDEX PART NUMBER DESCRIPTION QTY TRIM - DOOR - HORIZONTAL - BLACK TRIM - DOOR - SIDE - BLACK CASTING - MONETARY FRAME - BLACK TRIM - COIN CUP - BLACK EDGE PROTECTOR - BOTTOM PHOTO POP - DOOR - NESTLÉ USA (CUSTOMER SUPPLIED) FRAME - CUP DELIVERY DOOR LENS - SELECTION INSERT FRAME - PRODUCT IDENTIFIER

23 TABLE 7. DOOR ASSEMBLY (PART 1 OF 2) INDEX PART NUMBER DESCRIPTION QTY 1 - FLUORESCENT LAMP ASSEMBLY AND BALLAST (SEE FIGURE 16) MECH AND CANISTER ASSEMBLY (SEE FIGURE 20) DELIVERY DOOR (SEE FIGURE 15) - Figure 7. Door Assembly (Part 1 of 2)

24 TABLE 8. DOOR ASSEMBLY (PART 2 OF 2) INDEX PART NUMBER DESCRIPTION QTY 1 - DISPLAY ASSEMBLY (SEE FIGURES 17, 18) DOOR LOCK AND HANDLE ASSEMBLY (SEE FIGURES 13, 14) COIN RECEPTACLE ASSEMBLY (SEE FIGURE 11) TRIM COMPONENTS (SEE FIGURE 2) WELD ASSEMBLY - DOOR WELD 1 Figure 8. Door Assembly (Part 2 of 2)

25 Figure 9. Miscellaneous Mounted Parts - Door Assembly

26 TABLE 9. MISCELLANEOUS MOUNTED PARTS - DOOR ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY LIFT BRACKET - CUP STATION HANGER - CUP STATION BRACKET - DOOR SUPPORT FILLER STRIP - SANITATION Obsolete Item 11/16/

27 Figure 10. Nestlé Style - Full P.O.P. - Door Assembly - Interior

28 TABLE 10. NESTLÉ STYLE - FULL P.O.P. - DOOR ASSEMBLY - INTERIOR INDEX PART NUMBER DESCRIPTION QTY DOOR WELD ASSY - PAINTED TURRET & CSTR ASSY - 4 COL TURRET & CSTR ASSY - 7 COL BOLT - #1/4 X 20 X 2.38 HHS WASHER 5/8 X.265 X.048 ZINC/YEL SPACER -.227ID X.375OD X FUNNEL CUP DIAMETER MECHANISM ASSY - 11 COLUMN CENTER PLATE & TRIM ASSY - STERL FILLER STRIP - SANITATION Obsolete Item 11/16/ BRACKER - DOOR SUPPORT HANGER CUP STATION

29 7 Figure 11. Coin Receptacle Assemblies

30 TABLE 11. COIN RECEPTACLE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY SPACER - CUP SCREW - #8-18 X 1/2 - PHS - TAPPING CUP - COIN RETURN GATE - COIN RETURN SPRING - COIN RETURN DOOR SHAFT - DOOR - COIN RETURN TRIM COIN CUP BLACK

31 Figure 12. Door Lock Assembly

32 TABLE 12. DOOR LOCK ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY 1 - DOOR LOCK AND HANDLE ASSEMBLY (SEE FIGURES 13, 14) LOCK BAR ASSEMBLY SCREW GUIDE - LOCK BAR

33 Figure 13. Door Lock and Handle Assembly - Standard Trim and Nestlé Full POP Style

34 TABLE 13. DOOR LOCK AND HANDLE ASSEMBLY - STANDARD TRIM AND NESTLÉ FULL POP STYLE INDEX PART NUMBER DESCRIPTION QTY LEVER - LOCK LEVER - LOCK - BLACK (NESTLÉ FULL P.O.P. STYLE) PIVOT - LEVER LOCK BASE - LEVER LOCK BASE - LEVER LOCK - BLACK (NESTLÉ FULL P.O.P. STYLE) ACTUATOR ASSEMBLY - LOCK BAR CUP SPACER SCREW #10-32 X 1/2 RHS W/LW SHIELD - LATCH WASHER - STEEL - 7/16 X.203 X CATCH - DOOR LATCH LATCH - LOCK LOWER CYLINDER - LOCK - FLEX ACE CYLINDER - LOCK - VAN OPT KEY - VAN LOCK (NOT SHOWN) OPT GENERIC KEY - FLEX ACE (NOT SHOWN)

35 Figure 14. Millennia Door Lock and Handle Assembly

36 TABLE 14. MILLENNIA DOOR LOCK AND HANDLE ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY LEVER - HANDLE RETAINING RING - LOCK ACTUATOR ROLL PIN 1/8 X 1 1/ BASE - LOCK HANDLE SPRING - LOCK ACTUATOR - LOCK BAR SPRING - LIFT - ACTUATOR

37 20 Figure 15. Automatic Delivery Door

38 TABLE 15.AUTOM ATIC DELIVERY DOOR HotDrink C enter PartsM anual INDEX PART NUM BER DESCRIPTION QTY H A RN ESS -AUTO DOOR (NOT SHOW N) (SEE TABLE 87) RETAINER -HARNESS (NOT SHOW N) G EAR -TRAY CO U PLING -SPIRAL SW ITCH BRA CK ET -M OTOR -AUTO DOOR M O TO R AND PCB A SSEM BLY CO V ER -M OTOR -VEND DOOR OBSOLETE PART TRA CK -GEAR RACK TRA CK -VEND DOOR STO P -VEND DOOR SPO O L -SPRIN G DOOR -V EN D SPRING -VEND DOOR SH A FT -SPOOL SPRING COVER AIR GAP PLA TE A SSEM BLY -RACK RA CK -BREW ER H O U SING -SPRING BRA CE -CU P MECH AUTO VEND DOOR KIT: (ASSEMBLY Shown on previous NOT page SHOWN) diagram RACK ASSEMBLY - VEND DOOR 1 May,

39 P0050 Figure 16. Fluorescent Lamp Assembly and Ballast (Standard and Millennia Styles)

40 TABLE 16. FLUORESCENT LAMP ASSEMBLY AND BALLAST (STANDARD AND MILLENNIA STYLES) INDEX PART NUMBER DESCRIPTION QTY 1 - MOUNTING HARDWARE SUPPRESSION NETWORK ASSEMBLY (BRZ/MEX/US) JUMPER - FILTER AND FLUORESCENT LIGHT NOT USED IN THIS APPLICATION NOT USED IN THIS APPLICATION BALLAST ASSEMBLY WATT (BRZ./MEX/U.S.) BALLAST ASSY - 18 WATT (ARG./AUS./FR./GER./N.Z./S.A./SP./U.K.) MOUNTING HARDWARE LIGHT BRACKET ASSEMBLY (INCLUDES INDEX NUMBERS 9-11, AND 16) HARNESS - FLUORESCENT LAMP BRACKET - LIGHT TUBE SCREW #4-36 X.437 RHS FLUORESCENT LAMP STARTER FLUORESCENT LAMP END CAP - SLEEVE SAFETY SLEEVE - LAMP SCREW #4-36 X 5/8 RHS

41 Figure 17. Display Assembly - Part 1 of 2 (Standard and Millennia Style)

42 TABLE 17. DISPLAY ASSEMBLY - PART 1 OF 2 (STANDARD AND MILLENNIA STYLE) INDEX PART NUMBER DESCRIPTION QTY MOUNT - DISPLAY - LEFT PANEL ASSEMBLY - DISPLAY (INCLUDES INDEX NUMBERS 13 THOUGH 16 AND 19) (SEE FIGURE 18) OVERLAY - LARGE CUP FILLER-FRAME TRIM - HORIZONTAL - GLASS MOUNT - DISPLAY - RIGHT COVER PLATE ASSEMBLY GLASS - DISPLAY DISPLAY - PANEL - POLYCARBONATE CHANNEL - GLASS - VERTICAL CHANNEL - GLASS - HORIZONTAL

43 8 Figure 18. Display Assembly - Part 2 of

44 TABLE 18. DISPLAY ASSEMBLY - PART 2 OF 2 INDEX PART NUMBER DESCRIPTION QTY PANEL - DIPLAY - PRODUCT LABEL - FRESHLY GROUND AND BREWED (657 ONLY) (U.S.) FRAME - PRODUCT IDENTIFIER LABEL - INSTRUCTION AND CUP SIZE (BRZ./U.S.) SELECTION INSERTS (SEE BAG ASSEMBLY TABLE) DISPLAY - PHOTO - POINT OF PURCHASE BEAN WINDOW FILLER (653 AND 655 ONLY) PRICE SHEET.20 CENT TO $ PRICE SHEET.05 Cent To $

45 Figure 19. Door Hinge Assemblies

46 TABLE 19. DOOR HINGE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY SCREW - 5/16-18 X.75 FLT.HD SOCKET WELD SCREW - #1/4-20 X 1" LONG PLATE ASSEMBLY - HINGE MOUNTING /4-KEPS NUT EXT LW ZP HINGE ASSEMBLY - DOOR - LOWER HINGE ASSEMBLY - DOOR - LOWER - SELECTA WHITE BEARING - THRUST - LOWER HINGE

47 Figure 20. Mech and Canister Assembly - 11 Column

48 TABLE 20. MECH AND CANISTER ASSEMBLY - 11 COLUMN INDEX PART NUMBER DESCRIPTION QTY 1 - BOLT MECH AND CANISTER ASSEMBLY (INCLUDES INDEX NUMBERS 3 THROUGH 9) TURRET AND CANISTER ASSEMBLY - 4 COLUMN (SEE FIGURE 21) TURRET AND CANISTER ASSEMBLY - 7 COLUMN (SEE FIGURE 22) BOLT - #1/4 X 20 X /8 X.265 X.048 WASHER - ZINC SPACER ID X MECHANISM ASSEMBLY (SEE FIGURE 23) FUNNEL

49 Figure 21. Turret and Canister Assembly - 4 Column

50 TABLE 21. TURRET AND CANISTER ASSEMBLY - 4 COLUMN INDEX PART NUMBER DESCRIPTION QTY TURRET AND CANISTER ASSEMBLY - 4 COLUMN REF LID - CANISTER NEW BLACK EMBOSSED.090 THICK WASHER PLATE NUT - #8-32 KEPS SCREW - #8-32 X BEARING TURRET SPACER CUP TURRET ASSEMBLY 1B (INCLUDES INDEX NUMBER 8 AND 9) TURRET CENTER BASE - TURRET CANISTER - CUP STRAP - CANISTER LABEL - FILL LINE

51 Figure 22. Turret and Canister Assembly - 7 Column

52 TABLE 22. TURRET AND CANISTER ASSEMBLY - 7 COLUMN INDEX PART NUMBER DESCRIPTION QTY TURRET AND CANISTER ASSEMBLY - 7 COLUMN REF TURRET ASSEMBLY 1A (INCLUDES INDEX NUMBERS 2 AND 3) TURRET CENTER BASE - TURRET CANISTER - CUP LID - CANISTER NEW BLACK EMBOSSED.090 THICK SCREW - #8-32 X BEARING TURRET WASHER PLATE NUT - #8-32 KEPS TURRET ASSEMBLY 1B (INCLUDES INDEX NUMBERS 11 AND 12) TURRET CENTER BASE - TURRET STRAP - CANISTER LABEL - FILL LINE

53 Figure 23. Mechanism Assembly

54 TABLE 23. MECHANISM ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY MECHANISM ASSEMBLY - 11 COLUMN REF PCB ASSEMBLY - DETECTOR - CUP SENSOR COVER - CENTER - MOTOR COVER AND LED ASSEMBLY (INCLUDES INDEX NUMBERS 32 THROUGH 34) BOLT - #1/4 X 20 X 2.38 HHS SCREW - #8-32 X.31 HEX T.F. - BLACK COVER - END GROMMET - STRAIN RELIEF HARNESS - CUP MECHANISM BASE PLATE - 11 COLUMN NUT - 1/4 20 SELF LOCKING BUSHING BRACKET - MECHANISM MOUNTING - LEFT SCREW - 1/4 X 20 X.5 HEX HD WASHER RETAINER HARNESS X.81 HHSI TAPTITE WASHER - STEEL 3/8 X.170 X MOTOR AND CRANK ARM ASSEMBLY (INCLUDES INDEX NUM- BERS 21 THROUGH 23) SCREW - #8-16 X.38 PLASTIC HHS MOTOR AND PCB ASSEMBLY CRANK ARM AND ROLLER ASSEMBLY MOTOR AND PCB ASSEMBLY RETAINING RING - E TYPE ACTUATOR ASSEMBLY - CUP RING (SEE FIGURE 25) CUP RING ASSEMBLY (SEE FIGURE 24) PLATE - CUP RING MOUNTING MOUNTING BRACKET ASSEMBLY - RIGHT (SEE FIGURE 26) /4-20 X 3/4 HEX HEAD BOLT ZIP SPACER ID X.34OD X INDEX PLATE - GENEVA DRIVER - GENEVA COVER - CENTER HARNESS - CUP DETECT/LED JUMPER PCB ASSEMBLY - LED - CUP SENSOR SPRING - CUP RELEASE ARM (NOT SHOWN)

55 TABLE 24. CUP RING ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY NUT #8-32 SELF LOCKING SCREW - #8-16 X 1.25 PHS - PLASTITE HOUSING - CUP RING WASHER ROLLER ADJUSTER RING - INTERNAL SCREW #8-32 X.50 PHS W/LW CAM & GEAR ASSEMBLY RETAINER - CAM CAM - CUP - UNIVERSAL GEAR - 18 TOOTH GEAR - 10 TOOTH ARM - CAM WASHER - PAPER MECH GEAR RING - INTERNAL HOUSING - CUP RING p0046 Figure 24. Cup Ring Assembly

56 TABLE 25. ACTUATOR ASSEMBLY - CUP RING INDEX PART NUMBER DESCRIPTION QTY ACTUATOR ASSEMBLY - CUP RING REF SCREW - #8-32 X.31 HEX HD T.F. - BLACK RAMP - ACTUATOR CAM - ACTUATOR ACTUATOR - CUP RING 1 Figure 25. Actuator Assembly - Cup Ring

57 Figure 26. Mounting Bracket Assembly - Right

58 TABLE 26. MOUNTING BRACKET ASSEMBLY - RIGHT INDEX PART NUMBER DESCRIPTION QTY MOUNTING BRACKET ASSEMBLY - RIGHT REF NUT - 1/4 20 SELF LOCKING BRACKET - MECH MOUNTING - RIGHT LATCH SCREW -1 1/4 X 20 X.5 HEX HD SPRING ELEVATOR STOP BUSHING

59 10 Figure 27. Cabinet Assembly - Outer Layer

60 TABLE 27. CABINET ASSEMBLY - OUTER LAYER INDEX PART NUMBER DESCRIPTION QTY 1 - MONETARY PANEL ASSEMBLY (SEE FIGURE 37) BEAN WINDOW ASSEMBLIES (MODEL 657 ONLY) (SEE FIGURE 66) OPT 3 BEAN GRINDER ASSEMBLY (MODEL 657 ONLY) (SEE FIGURE 79) OPT LINER - FLOOR 1 5 CUP DELIVERY ASSEMBLY (SEE FIGURE 31) PRODUCT AND CONDIMENT CHUTES (SEE FIGURE 85) INGREDIENT CANISTER ASSEMBLIES (SEE FIGURE 69) FITTING - SPRAY HOSE SPRAY HEAD WASTE BUCKET (NOT SHOWN) GROUNDS BUCKET (NOT SHOWN) BRUSH - 1/2" DIAMETER (NOT SHOWN) BRUSH - 1 1/4" DIAMETER (NOT SHOWN) MONEY BOX ASSEMBLY (NOT SHOWN)

61 18 Figure 28. Cabinet Assembly - Inner Layer

62 TABLE 28. CABINET ASSEMBLY - INNER LAYER INDEX PART NUMBER DESCRIPTION QTY CABINET WELD ASSEMBLY - N.V. BLACK CABINET WELD ASSEMBLY - MILLENNIA GRAY MONETARY CHANNEL ASSEMBLY (SEE FIGURE 42) AIR COMPRESSOR (SEE FIGURE 36) WATER TANK ASSEMBLY (SEE FIGURE 64) SERVICE LIGHT AND BRACKET ASSEMBLY (SEE FIGURE 35) COVER - HOT WATER VALVES (U.S.) COVER - HEATER - WATER TANK CUP STATION SUPPORT, OVERFLOW SWITCH AND CUP SENSOR (SEE FIGURE 32) 9 - CANISTER SUPPORT CHANNEL (SEE FIGURE 80) SINGLE BREWER ASSEMBLY (WITHOUT FILTER) (SEE FIGURE 44) 1 (OPT) SINGLE BREWER ASSEMBLY (WITH FILTER (SEE FIGURE 45) DUAL BREWER ASSEMBLY (WITHOUT FILTER) (SEE FIGURE 46) DUAL BREWER ASSEMBLY (WITH FILTER) (SEE FIGURE 47) CHUTE - PAYOUT MOUNTING HARDWARE FILTER PAPER HOUSING COVER (SEE FIGURE 34) (OPT) 14 - LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES (SEE FIGURE 30) 15 - BREWER DRIVE ASSEMBLY (SEE FIGURE 54) VENILATION ASSEMBLY (SEE FIGURE 56) COVER - BREWER WATER SUPPLY (SEE FIGURE 60) (SEE FIGURE 61) (SEE FIGURE 62) PHOTO P.O.P. - CABINET - NESTLÉ USA (ADHERED TO SIDE OF CABINET) (NOT SHOWN)

63 Figure 29. Cabinet Assembly - Miscellaneous Mounted Parts

64 TABLE 29. CABINET ASSEMBLY - MISCELLANEOUS MOUNTED PARTS INDEX PART NUMBER DESCRIPTION QTY SCREEN - EXHAUST FAN (WITH FAN OPTION) (NOT SHOWN) (OPT) HARNESS - INTERLOCK TO EXHAUST (WITH FAN OPTION) (NOT SHOWN) (OPT) COVER - EXHAUST FAN (WITHOUT FAN OPTION) (OPT) EXHAUST FAN - 115V (WITH FAN OPTION) LOCK ARM - CABINET BRACKET - POWER PANEL RETAINER STOP - MONETARY PANEL WATER SHIELD BRACKET - CANISTER SUPPORT BRACKET - MOUNTING PLATE (WITH BREW MODES ONLY) PLATE - WATER FILTER (WITH WATER FILTER OPTION) (OPT) BRACE - CANISTER SUPPORT INSULATION - BACK - HOT WATER TANK

65 p0080 Figure 30. Leg, Leveler, and Leg and Hinge Assemblies

66 TABLE 30. LEG, LEVELER, AND LEG AND HINGE ASSEMBLIES Hot Drink Center Parts Manual INDEX PART NUMBER DESCRIPTION QTY PLUG - HOLE (NOT USED IN ALL APPLICATIONS) NUT - 1/4-20 WHIZ-LOCK PLATE - HINGE LEG BOLT TRAY BOLT LEG, HINGE, AND LEVELER ASSEMBLY LEVELER - CABINET LEG AND HINGE ASSEMBLY SCREW - # 5/16 X 1 W/LOCKING RING LEG AND LEVELER ASSEMBLY - CABINET LEG ASSEMBLY - CABINET LEVELER - CABINET

67 12 Figure 31. Cup Delivery Assembly

68 TABLE 31. CUP DELIVERY ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY CUP DELIVERY ASSEMBLY - STANDARD (INCLUDES INDEX NUMBERS 1, 2-11) WELD ASSEMBLY - CUP DELIVERY CUP DEFLECTOR - L.H CUP SPACER/SENSOR LENS DRAIN TRAY PUSH-IN FASTENER BASE - CUP DELIVERY STATION TUBE - DRAIN CUP DEFLECTOR - R.H RETAINER SPRING - CUP DEFLECTOR MOUNTING ASSEMBLY - CUP DEFLECTOR WING NUT # FORGED ZINC PLATED

69 Figure 32. Cup Station Support, Overflow Switch, and Cup Sensor

70 TABLE 32. CUP STATION SUPPORT, OVERFLOW SWITCH, AND CUP SENSOR INDEX PART NUMBER DESCRIPTION QTY STUD - STORAGE TRAY STUD - COLUMN LOCATOR CAPLUG - SPOUT SPOUT - DISPENSING DISPENSING NOZZLE RETAINING RING CUP STATION SUPPORT SCREW - #8-32 X.31 HEX HD SENSOR - ASSEMBLY - MUG CAPLUG - 3/8" - FLUSH TYPE SCREW - #6-19 X.38 PHS T/C BRACKET - CUP SENSOR SUPPORT - CUP STATION - EUROTWIN MUG SENSOR & BRACKET ASSEMBLY (INCLUDES INDEX 9-12)

71 Figure 33. Overflow Switch Assembly

72 TABLE 33. OVERFLOW SWITCH ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY OVERFLOW SWITCH ASSEMBLY (INDEX NUMBERS 3 AND 7 NOT INCLUDED) REF BRACKET ASSEMBLY - OVERFLOW SWITCH SCREW - #6-32 X 1/4 THS S/T SCREW X 5/8 RHS CHAIN - OVERFLOW SWITCH SCREW - #8-18 X 1/2 RHS T/C FLOAT - OVERFLOW SWITCH COVER - OVERFLOW SWITCH - BLACK FORMEX PLASTIC NUT KEPS W/EXT L/WASHER SWITCH LEVER V3L -131-D INSULATION - OVERFLOW SWITCH

73 Figure 34. Filter Paper Housing and Cover

74 TABLE 34. FILTER PAPER HOUSING AND COVER INDEX PART NUMBER DESCRIPTION QTY PAPER ROLL ASSEMBLY (INCLUDES INDEX NUMBER 1, 2, 3, AND 5) BRACKET - PAPER ROLL SCREW - #8-32 X 1/2 RHS MACH. ZINC NUT - #8-32 KEPS ZINC PLATE COVER ASSEMBLY - FILTER PAPER HOUSING HOUSING ASSEMBLY - FILTER PAPER ( No Locking Clip On Hub For Cover ) 1 * P FILTER PAPER PACKAGE ASSEMBLY *

75 Figure 35. Service Light/Bracket Assembly - U.S

76 TABLE 35. SERVICE LIGHT/BRACKET ASSEMBLY - U.S. INDEX PART NUMBER DESCRIPTION QTY SERVICE LIGHT/BRACKER ASSEMBLY - 115V RETAINER - HARNESS BALLAST ASSEMBLY BRACKET - SERVICE LIGHT BUSHING - #SB LIGHT ASSEMBLY - FLUORESCENT (INCLUDES INDEX NUMBERS 6-9) BRACKER - LOWER LIGHT SCREW - #4-36 X 5/ HARNESS - FLUORESCENT LIGHT SCREW - #4-36 X LAMP SLEEVE AND END CAPS ASSEMBLY FLUORESCENT LAMP

77 Figure 36. Air Compressor Assembly - U.S

78 TABLE 36. AIR COMPRESSOR ASSEMBLY - U.S. INDEX PART NUMBER DESCRIPTION QTY AIR COMPRESSOR ASSEMBLY (INCLUDES INDEX NUMBERS 2 THROUGH 7) AIR COMPRESSOR - BREWER SUPPORT - COMPRESSOR SHOULDER SCREW BUMPER - PLUG BUSHING #OCB VIBRATION ISOLATOR DIAMETER

79 Figure 37. Monetary Panel Assembly (Part 1 of 3)

80 TABLE 37. MONETARY PANEL ASSEMBLY (PART 1 OF 3) INDEX PART NUMBER DESCRIPTION QTY MONETARY PANEL WELD ASSEMBLY - NV BLACK SWITCH SERVICE SWITCH ASSEMBLY - FREE VEND LENS - DISPLAY FACEPLATE ASSEMBLY (WITH COIN OPTION) FACEPLATE ASSEMBLY (NO COIN OPTION) COIN INSERT (WITH COIN OPTION) LOWER MONETARY POSITION COIN BLOCK 1 SOME OF THE FOLLOWING ITEMS ARE INCLUDED WITH THE APPROPRIATE FREE VEND OPTIONS (NOT SHOWN): INSERT-INSTR-COINS/BILLS-U.S INSERT-INSTR-COINS ONLY-ENG INSERT-INSTR-FREE VEND-COIN/ INSERT-INSTR-FREE VEND-COINS INSERT-INSTRU-LOWER-UK-COINS CLIP-WIRE HARNESS SWITCH ASSY-FREE VEND

81 12 13 Figure 38. Monetary Panel Assembly (Part 2 of 3)

82 TABLE 38. MONETARY PANEL ASSEMBLY (PART 2 OF 3) INDEX PART NUMBER DESCRIPTION QTY BRACKET - PCB DISPLAY PCB ASSEMBLY - DISPLAY INSERT - INSTRUCTIONS- LOWER (SEE FIGURE 40) PLATE - INSERT BACKING OPT BUTTON - COIN RETURN SHAFT - RETURN BUTTON SPRING - SHELF RESET BRACKER - COIN RETURN BUTTON COIN CHUTE ASSEMBLY INSERT - INSTRUCTIONS - UPPER (SEE FIGURE 40) OPT SERVICE KEYPAD ASSEMBLY BRACKET AND DISPLAY PCB PLATE - MAGNET MOUNTING

83 Figure 39. Monetary Panel Assembly (Part 3 of 3)

84 TABLE 39. MONETARY PANEL ASSEMBLY (PART 3 OF 3) INDEX PART NUMBER DESCRIPTION QTY FACE PLATE ASSEMBLY - WITH COIN FACE PLATE ASSEMBLY - NO COIN SELECTION PANEL (WITH COIN OPTION) FACE PLATE ASSEMBLY (NO COIN OPTION) LENS - PUSHBUTTON LETTER SHEET - SELECTION SWITCH MEMBRANE SWITCH ASSEMBLY - SELECT PLATE - SELECT SWITCH - BACK UP - W/STUD /8" NUT - SELF-THREADING

85 Figure 40. Monetary Inserts

86 NOTES

87 Figure 41. Card Reader and Bill Validator Options

88 TABLE 41. CARD READER AND BILL VALIDATOR OPTIONS INDEX DESCRIPTION QTY 1 DOWNSTACK BILL VALIDATOR OPT 2 NUT 8 3 DEBIT CARD READER OPT 4 INSTRUCTION INSERT BACKING PLATE 0, 1, 2* 5 UPSTACK BILL VALIDATOR OPT 6 MONETARY PANEL WELD ASSEMBLY REF. *QUANTITY VARIES WITH MONETARY CAPABILITY MONETARY CAPABILITY TABLE 41A. MONETARY LOCATION OPTIONS UPPER LOWER NOTES ALL ITEMS ARE SECURED WITH FOUR NUTS (P/N ). SHADED ITEMS REPRESENT ALTERNATE CONFIGURATIONS. WITH COIN? COIN - VAL -CARD CARD READER UPSTACK VALIDATOR YES COIN - VAL -CARD DOWNSTACK VALIDATOR CARD READER YES COIN - VAL COIN - VAL COIN - CARD INSERT INSTRUCTIONS BACK- UP PLATE ( ) DOWNSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) UPSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) CARD READER COIN - CARD CARD READER INSERT INSTRUCTIONS BACK- UP PLATE ( ) YES VAL- CARD DOWNSTACK VALIDATOR CARD READER NO VAL- CARD CARD READER DOWNSTACK VALIDATOR NO COIN ONLY VAL ONLY VAL ONLY CARD ONLY CARD ONLY INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) DOWNSTACK VALIDATOR CARD READER INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) UPSTACK VALIDATOR INSERT INSTRUCTIONS BACK- UP PLATE ( ) INSERT INSTRUCTIONS BACK- UP PLATE ( ) CARD READER YES YES YES YES NO NO NO NO

89 TABLE 41B. COIN MECH OPTIONS - DUMB PART NUMBER DESCRIPTION MARS - TRC COINTRON COINCO 9340 L COINCO 9340 L - BRC MARS - MC MARS - TRC 6010 XV - 24V - W/15 PIN PLUG COINCO LF - 24 V - W/15 PIN PLUG CONLUX - USLX0041F COINCO 9300 L TABLE 41C. COIN MECH OPTIONS - MDB PART NUMBER DESCRIPTION COINCO - USD - G701 "MDB" MARS - TRC6512 "MDB" CONLUX - USLZ "MDB" TABLE 41D. BILL VALIDATOR OPTIONS - SERIAL PART NUMBER DESCRIPTION HARNESS P/N VALIDATOR - COINCO BA20SA VALIDATOR - MARS AE U5E VALIDATOR - MARS S VN U5E VALIDATOR - MARS - VN U5E 24V VALIDATOR - COINCO - BA 32 SA - 24V VALIDATOR - CONLUX - MKA B - 120V VALIDATOR - CONLUX - MKA B - 24V

90 TABLE 41E. BILL VALIDATOR OPTIONS - PULSE PART NUMBER DESCRIPTION HARNESS P/N MAKA VAL - MASK K (NB - 1KB - 400) VALIDATOR - MARS - S VN U5E - 110V TABLE 41F. BILL VALIDATOR OPTIONS - MDB PART NUMBER DESCRIPTION HARNESS P/N VALIDATOR - COINCO BA30SA VALIDATOR - MARS - VN U5M/ VALIDATOR - CONLUX - MKA B - 24V VALIDATOR - AE U5M "MDB - TABLE 41G. CARD READERS PART NUMBER DESCRIPTION HARNESS P/N DEBITEK #V15 - MM - NAT SYSTEM III BRACKET - DEBITEK CONTROLLER - NEW U.S - $20 BILL CAPABLE VALIDATORS Validator - Coin Acceptors Validator - Coin Acceptors Validator - Coin Acceptors Validator - Coin Acceptors Validator - Coin Acceptors Validator - Coin Acceptors Validator - mei Validator - mei Validator - mei Validator - mei

91 Figure 42. Monetary Channel

92 TABLE 42. MONETARY CHANNEL INDEX PART NUMBER DESCRIPTION QTY PCB ASSEMBLY - MAIN CONTROLLER WAS [ Click Here ] 1 2 SEE LABEL IC ASSEMBLY BRACKET - SWITCH - INTERLOCK SWITCH - 115V NOT USED IN THIS APPLICATION PCB ASSEMLY - HOT DRINK INTERFACE COVER - CONTROLLER / INTERFACE PCB POWER PANEL ASSEMBLY - 115V HOUSING - POWER PANEL TRIAC - 35AMP - 600V

93 Figure 43. Power Panel Assembly (Brazil/U.S.)

94 TABLE 43. POWER PANEL ASSEMBLY (BRAZIL/U.S.) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSY - DOMESTIC REF STANDOFF - PCB-3/8 SNAP LOCK INTERFERENCE FILTER NUT #8-32 KEPS ZINC PLATE * HARNESS - COIN HANDLING - POWER PLATE & STUD ASSY - POWER - DOM TRANSFORMER - 115V/23-V PRIMARY, 24V SECONDARY LABEL - N.V. BLACK JUMPER - GROUND WIRE CIRCUIT BREAKER - 4 AMP CIRCUIT BREAKER - 15 AMP SWITCH - SPDT - TOGGLE - 20 AMP HARNESS - POWER PANEL - DOMESTIC PCB ASSEMBLY - DUMB MECH POWER SUPPLY FUSE - 1 AMP (PART OF INDEX NUMBER 13)

95 Figure 44. Single Brewer Assembly (No Filter)

96 TABLE 44. SINGLE BREWER ASSEMBLY (NO FILTER) INDEX PART NUMBER DESCRIPTION QTY BARREL ASSEMBLY - BREWER (SEE FIGURE 48) REF BARREL SUPPORT - BREWER BOLT - 1/4-20 X 1 1/ RACK ASSEMBLY (SEE FIGURE 50) SHAFT - FLIP STOP BASKET - BREWER ROLLER - STOP SPRING - BREWER WALL ASSEMBLY - REAR SCREW - #8-32 X.38 HHS W/LW SIDEWALL - BREWER PIN-ROLLER - SIDEWALL SHAFT - SWING ARM LOCKNUT - #1/ GEAR & CAM ASSEMBLY WALL ASSEMBLY - BOTTOM - FRONT SPACER - SINGLE BREWER SPRING SWING ARM ASSEMBLY (INCLUDES INDEX NUMBERS 20 THROUGH 25) EXT. SPRING - SWING ARM SHAFT - RETAINER DIA SWING ARM ASSEMBLY FUNNEL - COFFEE SEAL - BREWER FILTER SUPPORT - 30 MESH (Pack Of 5) Single screen use p/n DRIVE CONNECTION - BREWER RETAINING RING DIA ROLLER - BREWER SPACER - CAM PINION GEAR ASSEMBLY LABEL - CAUTION: HOT WATER HAZARD (AUS./N.Z./U.K./U.S.) LABEL - CAUTION: HOT WATER HAZARD (GER) LABEL - CAUTION: HOT WATER HAZARD (ARG./MEX./SP.) LABEL - CAUTION: HOT WATER HAZARD (FR.)

97 Figure 45. Single Brewer Assembly (With Filter)

98 TABLE 45. SINGLE BREWER ASSEMBLY (WITH FILTER) INDEX PART NUMBER DESCRIPTION QTY SINGLE BREWER ASSEMBLY - WITH FILTER REF BARREL ASSEMBLY - BREWER (SEE FIGURE 48) BARREL SUPPORT - BREWER BOLT - 1/ / BASKET - BREWER PAPER RACK ASSEMBLY - BREWER (SEE FIGURE 50) WALL ASSEMBLY - REAR SHAFT - FLIP STOP ROLLER - STOP SPRING - BREWER SCREW - #8-32 X.38 HHS W/LW PAPER MECHANISM ASSEMBLY (SEE FIGURE ) 52) SPRING COVER - PAPER MECH SCREW - #10-32 X 3/8 HHS SL W/ EA PIN - ROLLER - SIDEWALL SHAFT - SWING ARM SIDEWALL - BREWER LOCKNUT - #1/ WALL ASSEMBLY - BOTTOM FRONT GEAR & CAM ASSEMBLY SPACER - SINGLE BREW ROLLER - BREWER SPRING SWING ARM ASSEMBLY (INCLUDES INDEX NUMBERS 24 THROUGH 29) SHAFT - RETAINER DIA EXT. SPRING - SWING ARM SWING ARM ASSEMBLY FUNNEL - COFFEE SEAL - BREWER FILTER SUPPORT - 30 MESH (Pack Of 5) Single screen use p/n DRIVE CONNECTION - BREWER RETAINING RING RATCHET DRIVE - PAPER MECH PINION GEAR ASSEMBLY

99 Figure 46. Dual Brewer Assembly (No Filter)

100 TABLE 46. DUAL BREWER ASSEMBLY (NO FILTER) INDEX PART NUMBER DESCRIPTION QTY DUAL BREWER ASSEMBLY - NO FILTER - TEA REF BARREL ASSEMBLY - BREWER (SEE FIGURE 46) BARREL SUPPORT - DUAL BREWER BOLT 1/4-20 X 1 1/ BASKET - BREWER TEA BASKET ASSEMBLY (NOT SHOWN) RACK ASSEMBLY - DUAL BREWER (SEE FIGURE 51) REAR WALL ASSEMBLY - DUAL BREWER SHAFT - FLIP STOP - DUAL BREWER ROLLER - STOP SPRING - BREWER SCREW - #8-32 X.38 HHS W/LW PIN - ROLLER - SIDEWALL SHAFT - SWING ARM - DUAL BREWER RETAINING RING SIDEWALL - BREWER LOCKNUT - #1/ BOT FRT WALL ASSEMBLY - DUAL BREWER TIME GEAR/CAM ASSEMBLY - DUAL BREWER SPACER - DUAL BREWER EXTERNAL SPRING SWING ARM ASSEMBLY - DUAL BREWER - NO FILTER SHAFT-RETAINER DIA EXT. SPRING - SWING ARM SWING ARM ASSEMBLY - DUAL BREWER FUNNEL - DUAL BREWER SEAL - BREWER FILTER SUPPORT - 30 MESH (Pack Of 5) Single screen use p/n DRIVE CONNECTION - BREWER RETAINING RING DIA PIN-ROLLER - SIDEWALL ROLLER - BREWER SIDEWALL - BREWER SPACER - CAM PINION GEAR ASSEMBLY - DUAL BREWER

101 Figure 47. Dual Brewer Assembly (With Filter)

102 TABLE 47. DUAL BREWER ASSEMBLY (WITH FILTER) INDEX PART NUMBER DESCRIPTION QTY DUAL BREWER ASSEMBLY WITH FILTER REF BARREL ASSEMBLY - BREWER (SEE FIGURE 49) RATCHER DRIVE - PAPER MECH BARREL SUPPORT - DUAL BREWER PINION GEAR ASSEMBLY - DUAL BREWER BOLT - 1/4-20 X 1 1/ BASKET - BREWER PAPER TEA BASKET ASSEMBLY (NOT SHOWN) RACK ASSEMBLY - DUAL BREWER (SEE FIGURE 51) REAR WALL ASSEMBLY - DUAL BREWER SHAFT - FLIP STOP - DUAL BREWER ROLLER - STOP SPRING - BREWER SCREW - #8-32 X.38 HHS W/LW PAPER MECHANISM ASSEMBLY - DUAL BREWER (SEE FIGURE 53) SPRING COVER - PAPER MECH SCREW #8-32 X 5/8 RHS A/R PIN - ROLLER - SIDEWALL SHAFT - SWING ARM - DUAL BREWER RETAINING RING SIDEWALL - BREWER LOCKNUT - #1/ BOTTOM FRONT WALL ASSEMBLY - DUAL BREWER TIME GEAR/CAM ASSEMBLY - DUAL BREWER SPACER - DUAL BREWER ROLLER - BREWER SPRING ROLL PIN 1/8 X 13/ SWING ARM ASSEMBLY - W/PAPER (INCLUDES INDEX NUMBERS 28 THROUGH 33) EXT. SPRING - SWING ARM SHAFT - RETAINER DIA SWING ARM ASSEMBLY - DUAL BREWER FUNNEL - DUAL BREWER SEAL - BREWER FILTER SUPPORT - 30 MESH (Pack Of 5) Single screen use p/n DRIVE CONNECTION - BREWER RETAINING RING DIA

103 Figure 48. Barrel Assembly - Single Brewer

104 TABLE 48. BARREL ASSEMBLY - SINGLE BREWER INDEX PART NUMBER DESCRIPTION QTY BARREL ASSEMBLY - SINGLE BREWER REF MANIFOLD ASSEMBLY - HOSE-BREW BARREL (INCLUDES INDEX NUMBERS 2 THROUGH 9) PLUG BREWER MANIFOLD MANIFOLD & INSERT ASSEMBLY - BREWER QUAD RING SEAL DEFLECTOR - MANIFOLD TUBE - AIR JET ROLL PIN SHOULDER SCREW VALVE - MANIFOLD - BREWER BARREL LOWER INSERT ASSEMBLY - BREWER BARREL (INCLUDES INDEX NUMBERS 11 THROUGH 14) QUAD RIND SEAL SEAL - BREWER LOWER INSERT BREWER BARREL SCREEN - BREWER BARREL BREWER BARREL QUAD RING SEAL EXTENTION - BREWER BARREL TUBE ID X.562 OD X.75 L

105 Figure 49. Barrel Assembly - Dual Brewer

106 TABLE 49. BARREL ASSEMBLY - DUAL BREWER INDEX PART NUMBER DESCRIPTION QTY BARREL ASSEMBLY - DUAL BREWER REF MANIFOLD ASSEMBLY - HOSE-BREW BARREL (INCLUDES INDEX NUMBERS 2 THROUGH 10) PLUG BREWER MANIFOLD TUBE ID X.562 OD X.75 L MANIFOLD & INSERT ASSEMBLY - BREWER QUAD RING SEAL DEFLECTOR - MANIFOLD TUBE - AIR JET ROLL PIN SHOULDER SCREW VALVE - MANIFOLD - BREWER BARREL LOWER INSERT ASSEMBLY - BREWER BARREL (INCLUDES INDEX NUMBERS 12 THROUGH 15) QUAD RING SEAL SEAL - BREWER LOWER INSERT BREWER BARREL SCREEN - BREWER BARREL BREWER BARREL

107 TABLE 50. RACK ASSEMBLY - SINGLE BREWER INDEX PART NUMBER DESCRIPTION QTY RACK ASSEMBLY - BREWER REF ROLLER - BREWER BASKET HOUSING ASSEMBLY (INCLUDES INDEX NUMBERS 3 THROUGH 6) BASKET HOUSING & WIPER ASSEMBLY BEARING - RETURN LEVER ROLLER FLAT SPRING - BASKET HOUSING SCREW - #6-32 X 1/4 PHS T/C SS SPRING - FLIP ROLLER LINKAGE ASSEMBLY - RIGHT RACK ASSEMBLY - RIGHT - BREWER SHAFT - FLIP SCREW - #8-32 X.38 HHS W/LW BRACKER ASSEMBLY - RACK RACK ASSEMBLY - LEFT - BREWER ROLLER LINKAGE ASSEMBLY - LEFT RETURN LEVER ROLLER ASSEMBLY 2 Figure 50. Rack Assembly - Single Brewer