CRANE MERCHANDISING SYSTEMS PARTS & SUPPORT: PARTS: SERVICE:

Transcription

1 0908

2 This machine has been engineered to our own rigid safety and performance requirements and manufactured in accordance with the safety standards of Underwriters Laboratories (UL) and the Canadian Standards Association (CSA). It has been designed to comply with the National Automatic Merchandising Association (NAMA) Standard for the Sanitary Design and Construction of Food and Beverage Vending Machines. To maintain this degree of safety and to continue to achieve the level of performance built into this machine, it is important that installation and maintenance be performed so as to not alter the original construction or wiring and that replacement parts are as specified in this Parts Manual. Your investment in this equipment will be protected by using the Operator s Guide and this Parts Manual in your operation, service and maintenance work. By following prescribed procedures, machine performance and safety will be preserved. CRANE MERCHANDISING SYSTEMS PARTS & SUPPORT: PARTS: SERVICE: For faster service, please have your account number ready before calling.

3 List of Tables A. Exterior of Door 43 Door Trim...3 Door Hinge Assemblies...5 B. Interior of Door Door Glass and Misc. Interior Door Parts...7 Light Assembly...9 Main Controller & Access Panel Stop... Manual Vend Guide Assembly-Top...3 Manual vend guide assembly-middle...5 vend guide assembly-bottom (manual and auto)...7 Power vend guide assembly-top...9 Power vend guide assemby-middle... Door switch assembly...3 Interior Door - Miscellaneous Parts...5 Lock Bar Assembly...7 Buss bar and vend door lock...9 C. Cabinet Leg Assemblies & Air Inlet/Outlet Screens...3 Base Plate Accessory...33 D. Turret Turret...35 Turret - Top Parts...37 Turret - Bottom Parts...39 Motor Drive Assembly...4 Stop Pin Assembly...43 E. Refrigeration Refrigeration Unit Assembly...45 Refrigeration Unit Components...47 Refrigeration Unit - Base and Condenser Fan...49 Evaporator Motor Assembly...5 Refrigeration Air Ducts...53 F. Monetary Monetary Panel...55 Interior Monetary Panel...57

4 upper monetary - exterior...59 Exterior Monetary Panel...6 Coin Box Assembly...63 Monetary Options & Interior monetary Panel...65 G. Miscellaneous Power Panel Assembly - Domestic (5V)...67 Power Panel Assembly - International (30V)...69 Power Panel Assembly - Rear - International (30V) Harness List...75 Bag Assembly: 5 - B (5V)...76 Bag Assembly: 5 - B43000 (30V)...76 INDEX List of Parts

5 List of Figures A. Exterior of Door 43 Door Trim... Door Hinge Assemblies...4 B. Interior of Door Door Glass and Misc. Interior Door Parts...6 Light Assembly...8 Main Controller & Access Panel Stop...0 Manual Vend Guide Assembly-Top... Manual vend guide assembly-middle...4 Vend guide assembly-bottom (manual and auto)...6 Power vend guide assembly-top...8 Power vend guide assembly-middle...0 Door switch assembly... Interior Door - Miscellaneous Parts...4 Lock Bar Assembly...6 Buss bar and vend door lock...8 C. Cabinet Leg Assemblies & Air Inlet/Outlet Screens...30 Base Plate Accessory...3 D. Turret Turret...34 Turret - Top Parts...36 Turret - Bottom Parts...38 Motor Drive Assembly...40 Stop Pin Assembly...4 E. Refrigeration Refrigeration Unit Assembly...44 Refrigeration Unit Components...46 Refrigeration Unit - Base and Condenser Fan...48 Evaporator Motor Assembly...50 Refrigeration Air Ducts...5 F. Monetary Monetary panel...54 Interior Monetary Panel...56 Upper Monetary - exterior...58 Exterior Monetary Panel...60

6 Coin box assy...6 Monetary Options & Interior monetary Panel...64 G. Miscellaneous Power Panel Assembly - Domestic (5V)...66 Power Panel Assembly - International (30V)...68 Power Panel Assembly - Rear - International - (30V)...70 Shopper Wiring Diagram - Domestic - (5V)...7 Shopper Wiring Diagram - International - (30V)...73 Harness Diagram - Power Panel...74 INDEX List of Parts

7 Revolution Parts Manual Section A: Exterior of Door Section A: Exterior of Door October

8 Section A: Exterior of Door Revolution Parts Manual FIGURE : 43 DOOR TRIM October 006

9 Revolution Parts Manual Section A: Exterior of Door TABLE : 43 DOOR TRIM INDEX PART NUMBER DESCRIPTION QTY 9400 AP LOGO PLATE PANEL OUTER SHELL WELD ASSEMBLY-ACCESS PANEL TRIM - SIDE - ACCESS PANEL - BLACK T HANDLE LOCK 6 AP COIN CUP TRIM ASM BLACK ST POP-LARGE-GRAPHICS 4385 PANEL POP-LARGE-HDPE TRIM - HORIZONTAL - LOWER S - CURVE TRIM - HORIZONTAL - MID S - CURVE TRIM - LEFT VERTICAL - LOWER 4335 VW/A-DOOR FRAME TRIM - LEFT VERTICAL - UPPER TRIM - HORIZONTAL - UPPER - CURVE TABLE A: TRIM HARDWARE TRIM DESCRIPTION RETAINER SCREW TRIM - HORIZONTAL - UPPER - CURVE 45537() 45097(4) TRIM - LEFT VERTICAL - UPPER 45537(5) TRIM - LEFT VERTICAL - LOWER 45537(5) () 4307 TRIM - HORIZONTAL - MID S - CURVE 45537(4) 47477(4) TRIM - HORIZONTAL - LOWER S - CURVE (3) PANEL - TRIM - TOP ACCESS (6) PANEL - TRIM - BOTTOM - ACCESS (6) 434 TRIM - POST - CENTER - BLACK (4) October

10 Section A: Exterior of Door Revolution Parts Manual FIGURE : DOOR HINGE ASSEMBLIES October 006

11 Revolution Parts Manual Section A: Exterior of Door TABLE : DOOR HINGE ASSEMBLIES INDEX PART NUMBER DESCRIPTION QTY 4300 PLATE - CLAMP - HINGE - TOP SCREW - 5/6-8X.75 FLAT HEAD SOCKET HINGE ASSEMBLY - DOOR - TOP WELD ASSEMBLY - DOOR FRAME - N.V. BLACK PLATE ASSEMBLY - HINGE MOUNTING HINGE & PIN ASSEMBLY - DOOR BOTTOM BEARING-THRUST LOWER HINGE WELD SCREW-#/4-0 X "LG 9 70 NUT-/4-0 WHIZ-LOCK October

12 Section B: Interior of Door Revolution Parts Manual Section B: Interior of Door FIGURE 3: DOOR GLASS AND MISC. INTERIOR DOOR PARTS October 006

13 Revolution Parts Manual Section B: Interior of Door TABLE 3: DOOR GLASS AND MISC. INTERIOR DOOR PARTS INDEX PART NUMBER DESCRIPTION QTY FOAMED DOOR ASSEMBLY - BLACK/B DELETE RETAINER - HARNESS SCREW - #6-9 X.38 PHIL.PHS GLASS ASSEMBLY - INSULATED - 4 VAC GASKET - DOOR - BLACK SCREW - #8-8 X /4 RHP TAPP SCREW - #8-8 X.75 PLASTITE HH REINF. - POST - CENTER - BLACK TAPE-VHB-6 MIL X.6 WIDE SCREW - #8-3X.3 HEX HD.TF-BL BRACKET - DOOR CHAIN 455 CHAIN - SASH LONG 455 COVER - CHAIN PLATE-STRIKE-PWR. PNL BRACKET - CHAIN - DOOR PCB ASSEMBLY - SHOPPER INTERFACE COVER - ELECTRIC - /O BOARD SCREW - #8-8 X /4 RHP TAPPING GLIDE - DOOR CHANNEL - SUPPORT - DOOR PLUG - HOLE PLUG - FOAMING HOLE 4309 TAPE - SPONGE -.4 X COVER WIRE GUIDE SCREW-#8-3 X.50 HX.HD.-T/F-B 4 October

14 Section B: Interior of Door Revolution Parts Manual FIGURE 4: LIGHT ASSEMBLY October 006

15 Revolution Parts Manual Section B: Interior of Door TABLE 4: LIGHT ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY LAMP ASSEMBLY - FLUORESCENT - DOOR - BLACK - (5V) 437 LAMP ASSEMBLY - FLUORESCENT - DOOR - BLACK - (30V) SHIELD-UPPER, WIRING, LAMP 436 COVER-UPPER, WIRING, LAMP SAFETY LAMP SLEEVE W/END CAPS LAMP - FLUORESCENT - 3 WATT - (5V) 4369 LAMP - FLUORESCENT - 36 WATT - (30V) RETAINER-HARNESS BALLAST - ASSEMBLY - ELECTRONIC - (5V) BALLAST - MAGNETIC - (30V) ASSY-BRACKET, LAMP PANEL-TRIM-LAMP-BLACK GASKET-.9X ASSY-BRACKET, LAMP 436 COVER-LOWER, WIRING, LAMP SCREW-#6-3 X 5/6-RHS-W/LKW HARNESS - LAMP TO BALLAST - (5V) HARNESS - LAMP TO BALLAST - (30V) October

16 Section B: Interior of Door Revolution Parts Manual FIGURE 5: MAIN CONTROLLER & ACCESS PANEL STOP October 006

17 Revolution Parts Manual Section B: Interior of Door TABLE 5: MAIN CONTROLLER & ACCESS PANEL STOP INDEX PART NUMBER DESCRIPTION QTY PLATE-CONTROLLER BOARD MOUNT 4799 SCREW-#8-8 X.6 HEX/WH PCB ASSY SOLENOID W/O MOTOR PCB ASSY SOLENOID W/ MOTOR SPACER-LINER-.375LG X.500 DIA HOUSING - MAIN CONTROLLER BOARD 6 see below MAIN CONTROLLER PC w/eprom SCREW-#8-0 X.5 T/F-PHS COVER MAIN CONTROLLER-BOARD SCREW - #8-3X.3 HEX HD.TF-BL Main Controller P Eprom October

18 Section B: Interior of Door Revolution Parts Manual FIGURE 6: MANUAL VEND GUIDE ASSEMBLY-TOP October 006

19 Revolution Parts Manual Section B: Interior of Door TABLE 6: MANUAL VEND GUIDE ASSEMBLY-TOP INDEX PART NUMBER DESCRIPTION QTY GUIDE ASSEMBLY - VEND - TOP - MANUAL GUIDE & HEATER ASSEMBLY - VEND (ITEMS -) WIRE & TERMINAL ASSEMBLY - HEATER DOOR - 4 VAC 4305 GUIDE - DOOR - VEND RETAINER - GUIDE SCREW - #6-3 X.5 PHS T/C WIRE TIE-#PLTM-M WELD ASSEMBLY - VEND DOOR HOLDER - SPRING - RETURN - MANUAL SCREW - #8-8 X.75 PLASTITE HHS -- SPRING & ROLLER ASSEMBLY-DOOR-RET (ITEMS 9-,3-5) SPRING - DOOR ROLLER - SUPPORT - DOOR WASHER - VEND DOOR SPRING ASSEMBLY 4368 SCREW - #6-9 X.3 PHIL.PHS.T/C BRACKET - ROLLER - SPRING RETURN PIN - ROLLER October

20 Section B: Interior of Door Revolution Parts Manual FIGURE 7: MANUAL VEND GUIDE ASSEMBLY-MIDDLE October 006

21 Revolution Parts Manual Section B: Interior of Door TABLE 7: MANUAL VEND GUIDE ASSEMBLY-MIDDLE INDEX PART NUMBER DESCRIPTION QTY GUIDE ASSEMBLY - VEND - MID - MANUAL COVER - GUIDE - VEND GUIDE & HEATER ASSEMBLY - VEND (ITEMS -3) WIRE & TERMINAL ASSEMBLY - HEATER DOOR - 4VAC GUIDE - DOOR - VEND RETAINER - GUIDE SCREW - #6-3 X.5 PHS T/C WIRE TIE-#PLTM-M WELD ASSEMBLY - VEND DOOR HOLDER - SPRING - RETURN - MANUAL STOP - VEND - DOOR SCREW - #8-8 X.75 PLASTITE HHS SPRING & ROLLER ASSEMBLY - DOOR - RETURN (ITEMS -4, 6-8 ) SPRING - DOOR 433 ROLLER - SUPPORT - DOOR WASHER - VEND DOOR SPRING ASSEMBLY SCREW - #6-9 X.3 PHIL.PHS.T/C BRACKET - ROLLER - SPRING RETURN PIN - ROLLER 7 -- SEE FIGURE DOOR SWITCH ASSEMBLY October

22 Section B: Interior of Door Revolution Parts Manual FIGURE 8: VEND GUIDE ASSEMBLY-BOTTOM (MANUAL AND AUTO) October 006

23 Revolution Parts Manual Section B: Interior of Door TABLE 8: VEND GUIDE ASSEMBLY-BOTTOM (MANUAL AND AUTO) INDEX PART NUMBER DESCRIPTION QTY GUIDE ASSEMBLY - VEND - BOTTOM GUIDE & HEATER ASSEMBLY - VEND (ITEMS -) WIRE & TERMINAL ASSEMBLY - HEATER DR - 4 VAC 4305 GUIDE - DOOR - VEND RETAINER - GUIDE SCREW - #6-3 X.5 PHS T/C WELD ASSEMBLY - VEND DOOR HOLDER - SPRING - RETURN - MANUAL (MANUAL DOOR ONLY) WIRE TIE-#PLTM-M STOP - VEND - DOOR SCREW - #6-9 X.3 PHIL.PHS.T/C SCREW - #8-8 X.75 PLASTITE HHS -- SEE FIGURE DOOR SWITCH ASSEMBLY October

24 Section B: Interior of Door Revolution Parts Manual FIGURE 9: POWER VEND GUIDE ASSEMBLY-TOP October 006

25 Revolution Parts Manual Section B: Interior of Door TABLE 9: POWER VEND GUIDE ASSEMBLY-TOP INDEX PART NUMBER DESCRIPTION QTY GUIDE ASSEMBLY - VEND - TOP - POWER GUIDE & HEATER ASSEMBLY - VEND (ITEMS -) WIRE & TERMINAL ASSEMBLY - HEATER DOOR - 4 VAC 4305 GUIDE - DOOR - VEND RETAINER - GUIDE SCREW - #6-3 X.5 PHS T/C WELD ASSEMBLY - VEND DOOR SCREW - #8-8 X.75 PLASTITE HHS SCREW - #6-9 X.3 PHIL.PHS.T/ MOTOR BRACKET & GEAR ASSEMBLY - VEND BEARING - SHOULDER - BRONZE October

26 Section B: Interior of Door Revolution Parts Manual FIGURE 0: POWER VEND GUIDE ASSEMBLY-MIDDLE October 006

27 Revolution Parts Manual Section B: Interior of Door TABLE 0: POWER VEND GUIDE ASSEMBY-MIDDLE INDEX PART NUMBER DESCRIPTION QTY GUIDE ASSEMBLY - VEND - MID - POWER COVER - GUIDE - VEND GUIDE & HEATER ASSEMBLY - VEND (ITEMS -3) WIRE & TERMINAL ASSEMBLY - HEATER DOOR - 4 VAC GUIDE - DOOR - VEND RETAINER - GUIDE SCREW - #6-3 X.5 PHS T/C STOP - VEND - DOOR SCREW - #8-8 X.75 PLASTITE HHS WELD ASSEMBLY - VEND DOOR SCREW - #6-9 X.3 PHIL.PHS.T/C MOTOR BRACKET & GEAR ASSEMBLY - VEND 436 BEARING - SHOULDER - BRONZE -- SEE FIGURE DOOR SWITCH ASSEMBLY October

28 Section B: Interior of Door Revolution Parts Manual FIGURE : DOOR SWITCH ASSEMBLY October 006

29 Revolution Parts Manual Section B: Interior of Door TABLE : DOOR SWITCH ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY 434 SCREW-#3-4 X.6 PLASTITE-PN COVER-MICRO SWITCH SWITCH-ROLLER LEVER SPRING-SWITCH-DOOR-VEND CAM-MICRO SWITCH GUIDE & HEATER ASSY-VEND WASHER STEEL 3/8 X.47 X SCREW-#6-3 X.5 PHS T/C ROLLER-CAM-MICRO SWITCH HARNESS-VEND DOOR-MANUAL HARNESS-VEND DOOR-POWER October

30 Section B: Interior of Door Revolution Parts Manual FIGURE : INTERIOR DOOR - MISCELLANEOUS PARTS October 006

31 Revolution Parts Manual Section B: Interior of Door TABLE : INTERIOR DOOR - MISCELLANEOUS PARTS INDEX PART NUMBER DESCRIPTION QTY TAP PLATE - LATCH ARM LATCH - DOOR - MONETARY RIVET - POP -.5 DIA X SCREW - #8-3X.3 HEX HD.TF-BL SCREW- #8-8 X,75 PLASTITE HH BRACKET - MOUNT - SLIDE NUT #8-3 KEPS ZINC PLATE ARM LOCK-MONETARY SIDE-FILLER-MONETARY CHUTE-PAYOUT 438 CHUTE- MONEY BOX SCREW - #8-0X.38 HEX HD.TF SCREW #8-3 X 9/6 P/H PHIL SCREW - #0-3X3/8 ACORN HEX W LATCH/PLATE ASSEMBL ANGLE BRACKET LOCK October

32 Section B: Interior of Door Revolution Parts Manual FIGURE 3: LOCK BAR ASSEMBLY October 006

33 Revolution Parts Manual Section B: Interior of Door TABLE 3: LOCK BAR ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY AP X 3/4 CARRIAGE BOLT ZN 9600 T HANDLE LOCK 3 AP COIN CUP TRIM ASM BLACK ST 4 AP COIN CUP ASM SECURITY 0 DOM 5 AP76-8R6 8-3X3/8 PN/NIBS HD T3 BL MAX 6 6 AP8443 NUT, /4 SELF THREADING, PAL T HANDLE LINKAGE ASM RETAINING RING REINF E TYP LOCK ARM PIVOT ASSY T HANDLE LOCK ARM 4 AP KEPS NUT ZN 4 October

34 Section B: Interior of Door Revolution Parts Manual FIGURE 4: BUSS BAR AND VEND DOOR LOCK October 006

35 Revolution Parts Manual Section B: Interior of Door TABLE 4: BUSS BAR AND VEND DOOR LOCK INDEX PART NUMBER DESCRIPTION QTY 4347 LOCK ASSY-DOOR VEND-SOLENOID SCREW - #8-8 X.75 PLASTITE SCREW-#8-/ PHILLIPS-PH.-S.S BUSS BAR SEAL - TUBE & DART October

36 Section C: Cabinet Revolution Parts Manual Section C: Cabinet FIGURE 5: LEG ASSEMBLIES & AIR INLET/OUTLET SCREENS October 006

37 Revolution Parts Manual Section C: Cabinet TABLE 5: LEG ASSEMBLIES & AIR INLET/OUTLET SCREENS INDEX PART NUMBER DESCRIPTION QTY LEG & LEVELER ASSEMBLY - CABINET (ITEMS -) LEG ASSEMBLY - CABINET - WELD LEVELER - CABINET SCREW - #5/6 X W/LOCKING RING LEG & LEVELER ASSEMBLY - RIGHT FRONT (ITEMS AND 5) SCREEN - OUTLET AIR LEG ASSEMBLY - RIGHT FRONT LEG, HINGE & LEVELER ASSEMBLY(ITEMS AND 6) PLATE ASSEMBLY - LEG & HINGE SCREEN - INLET AIR October

38 Section C: Cabinet Revolution Parts Manual FIGURE 6: BASE PLATE ACCESSORY October 006

39 Revolution Parts Manual Section C: Cabinet TABLE 6: BASE PLATE ACCESSORY INDEX PART NUMBER DESCRIPTION QTY BASE PLATE AND ACCESSORY ASSEMBLY MILLENNIA SLIDE - BASE PLATE - LEFT HAND COTTER PIN 3/3 X 3/4 LONG BRACKET - BASE PLATE SLIDE - BASE PLATE - RIGHT HAND BASE PLATE ASSEMBLY - 38" MILLENNIA October

40 Section D: Turret Revolution Parts Manual Section D: Turret FIGURE 7: TURRET October 006

41 Revolution Parts Manual Section D: Turret TABLE 7: TURRET INDEX PART NUMBER DESCRIPTION QTY TURRET - STANDARD - BLACK SHELF - PRODUCT BASE ASSEMBLY - TURRET - BOTTOM GEAR SECTION - 5 SEGMENT PLATE ASSEMBLY - ROLLER SUPPORT PLATE & BUSHING ASSEMBLY - SUPPORT RETAINER - BUSHING BEARING - FLANGED - OILITE FB PLATE - ROLLER BEARING PLATE ASSEMBLY - SHAFT & MOUNTING INSULATION - FOAM COVER - INSULATION SCREW - #8-3 X.3 HEX HD.TF-BLK. 4 October

42 Section D: Turret Revolution Parts Manual FIGURE 8: TURRET - TOP PARTS October 006

43 Revolution Parts Manual Section D: Turret TABLE 8: TURRET - TOP PARTS INDEX PART NUMBER DESCRIPTION QTY PLATE - TURRET LATCH - TOP SCREW - #8-3X.3 HEX HD.TF-BL SCREW - #8-3X.3 HEX HD.TF-BL ARM - TURRET LATCH - TOP SCREW - #6-3 X 3/8 PHIL.PH COLUMN ASSEMBLY - CENTER WALL - SHELF (CLEAR) RAIL - TURRET SHELF - PRODUCT DIVIDER - SHELF RETAINER - SHELF TOP PLATE - TURRET PIN & PLATE ASSEMBLY BUSHING & LOCK NUT ASSEMBLY (NEXT ITEMS) BEARING - FLANGED - OILITE FB LOCK NUT - TURRET LATCH - TOP October

44 Section D: Turret Revolution Parts Manual FIGURE 9: TURRET - BOTTOM PARTS October 006

45 Revolution Parts Manual Section D: Turret TABLE 9: TURRET - BOTTOM PARTS INDEX PART NUMBER DESCRIPTION QTY GEAR SECTION - 5 SEGMENT SENSOR - PROXIMITY CARRIAGE BOLT - #0-4 X MAGNET - MAGNETIZED PLATE - STOP PIN - 5 SEGMENT NUT - #0-4 SELF-LOCKING COVER - TURRET - MOTOR - GEAR RETAINING RING REINF E TYP GEAR - DRIVE - BLACK BUSHING & DRIVE SHAFT ASSEMBLY (ITEMS -5) SCREW #8-3 X.50 PHILLIPS-PN HD HOUSING - DRIVE SHAFT - UPPER GROOVE - PIN -.5 DIA.X.875 LG COUPLING - DRIVE SHAFT - DRIVE HOUSING - DRIVE SHAFT - LOWER MOTOR DRIVE ASSEMBLY -5V (SEE TABLE 0 FOR DETAILS) MOTOR DRIVE ASSY-30V (SEE TABLE 0 FOR DETAILS) STOP PIN ASSEMBLY-5V (SEE TABLE FOR DETAILS) 4396 STOP PIN ASSY-FOREIGN SCREW-#8-3 X.3 HEX HD. TF-BLK BRACKET-STOP PIN ASSY BUSHING-STOP PIN PLATE-SENSOR 40 SCREW-#4-40 X /4 RHS October

46 Section D: Turret Revolution Parts Manual FIGURE 0: MOTOR DRIVE ASSEMBLY October 006

47 Revolution Parts Manual Section D: Turret TABLE 0: MOTOR DRIVE ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY MOTOR DRIVE ASSEMBLY - (5V) (ITEMS 8-) 430 MOTOR DRIVE ASSEMBLY - (30V)(ITEMS 8-) SCREW-#8-3X.3 HEX HD.TF COVER-TURRET-MOTOR-GEAR RETAINING RING REINF E TYP GEAR-DRIVE-BLACK SCREW#8-3 X.50 PHILLIPS-P BUSHING & DRIVE SHAFT ASSY HOUSING-DRIVE SHAFT-LOWER SCREW-#8-3X.38 HHS W/LW BRACKET - MOTOR MOUNT GROOVE - PIN -.5 DIA.X.875 LG 436 MOTOR - REVERSIBLE - (5V) 439 MOTOR - REVERSIBLE - (30V) 4706 SCREW-#4-4 X.375 PH Z-P ASSY- MOTION DETECTOR WASHER - SCAVENGER BAR SCREW #0-3 X 3/8 HEX HD ENCODER - FOOD DRUM POSITION BRACKET - ENCODER SENSOR MOUNTING NUT #8-3 KEPS ZINC PLATE SCREW-#8-8 X /"PHIL.PAN RETAINER-HARNESS SCREW - #8-3X.5 PHS October

48 Section D: Turret Revolution Parts Manual FIGURE : STOP PIN ASSEMBLY October 006

49 Revolution Parts Manual Section D: Turret TABLE : STOP PIN ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY STOP PIN ASSEMBLY - (5V) 4396 STOP PIN ASSEMBLY - (30V) SCREW#8-3 X.3HEX/HD.S HOUSING-STOP PIN ASSY BUSHING-ACTUATOR-STOP PIN LEVER-ACTUATOR-STOP PIN BUSHING-ACTUATOR-STOP PIN WASHER PLATE SCREW #0-3 X -/ PHILLIPS SPRING-EXTENSION STUD-DRIVE ARM ROLLER-DRIVE ARM BRACKET-SWITCH-OPTO ASSY- MOTION DETECTOR SCREW-#4-4 X.375 PH Z-P S.T NUT #8-3 KEPS ZINC PLATE WIRE TIE-#PLTM-M COVER-STOP PIN ASSY BUSHING-OPEN/CLOSED SCREW #6-3 X 5/6-RHS-W/LKW GROOVE-PIN-.5 DIA. X.875 LG NUT #6-3 KEPS ZINC PLATE SOLENOID ASSY 0 VOLTS 4353 SOLENOID ASSY 40 VOLTS BUSHING RETAINER ROLL PIN STOP PIN NUT #0-3 KEPS ZINC PLATE October

50 Section E: Refrigeration Revolution Parts Manual Section E: Refrigeration FIGURE : REFRIGERATION UNIT ASSEMBLY October 006

51 Revolution Parts Manual Section E: Refrigeration TABLE : REFRIGERATION UNIT ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY REFRIGERATION UNIT ASSEMBLY - 60HZ - (5V) REFRIGERATION UNIT ASSEMBLY - 50HZ - (30V) EVAPORATOR ASSEMBLY - PLUS - PANELS CONDENSER - 9 X 7.5 3R7 FPI BLADE - CONDENSER FAN MOTOR - CONDENSER FAN - (5V) 4774 MOTOR - CONDENSER FAN - (30V) FILTER/DRIER - REFRIGERANT PAN - CONDENSATE ACCUMULATOR P-H BASE/STUD ASSEMBLY - REFRIGERATION UNIT SPACER - COMP. DISCH.TUBE TUBE - DISCH LINE - COMPRESSOR TO CONDENSER COMPRESSOR - (5V) - AKA4460YXA 60H COMPRESSOR - (30V) - R34A 0453 WIRE TIE - #PLT.5IM KB TUBE - PROCESS - EL October

52 Section E: Refrigeration Revolution Parts Manual FIGURE 3: REFRIGERATION UNIT COMPONENTS October 006

53 Revolution Parts Manual Section E: Refrigeration TABLE 3: REFRIGERATION UNIT COMPONENTS INDEX PART NUMBER DESCRIPTION QTY EVAPORATOR ASSEMBLY - PLUS - PANELS (INCLUDES ITEMS & 3) PANEL - EVAPORATOR EVAPORATOR COIL - 4 ROW 4 05 /4-0 KEPS NUT EXT LW ZP WASHER -.88 O.D.X.38 I.D.X SLEEVE - /6 LENGTH GROMMET - /6 HEIGHT BASE/STUD ASSEMBLY - REFRIGERATOIN UNIT SCREW - #8-8 X.38 - LGM NUT #8-3 KEPS ZINC PLATE CONDENSER - 9 X 7.5 3R7 FPI SHROUD - CONDENSER - CARDBOARD FILTER/DRIER - REFRIGERANT HEAT EXCHANGER ASSEMBLY COMPRESSOR - AKA4460YXA 60H - (5V) COMPRESSOR - R34A - (30V) October

54 Section E: Refrigeration Revolution Parts Manual FIGURE 4: REFRIGERATION UNIT - BASE AND CONDENSER FAN October 006

55 Revolution Parts Manual Section E: Refrigeration TABLE 4: REFRIGERATION UNIT - BASE AND CONDENSER FAN INDEX PART NUMBER DESCRIPTION QTY REFRIGERATION UNIT ASSEMBLY - COMPRESSOR - (5V) REFRIGERATION UNIT ASSEMBLY - 50HZ - (30V) COMPRESSOR-AKA4460YXA 5V 60H COMPRESSOR-0V-R34A NUT - WING - #8-3 W/NYLON INSERT BAG COMPRESSOR PARTS ASSEMBLY - FRONT - SHIP - BRACKET - STUD 4 05 /4-0 KEPS NUT EXT LW ZP SCREW-#5/6-8 X.63 HEX HD BASE/STUD ASSEMBLY - REFRIGERATION UNIT BRACKET - MOTOR MOUNT BLADE - CONDENSER FAN MOTOR - CONDENSER FAN - (5V) 4774 MOTOR - CONDENSER FAN - (30V) SLEEVE - /6 LENGTH GROMMET - /6 HEIGHT ASSEMBLY - BACK - SHIP - BRACKET - STUD October

56 Section E: Refrigeration Revolution Parts Manual FIGURE 5: EVAPORATOR MOTOR ASSEMBLY October 006

57 Revolution Parts Manual Section E: Refrigeration TABLE 5: EVAPORATOR MOTOR ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY EVAPORATOR MOTOR ASSEMBLY - (5V) (ITEMS,, 5-7) 4373 EVAPORATOR MOTOR ASSEMBLY - (30V) (ITEMS,, 5-7) ARM-LOCK-CABINET X / ACORN HWHO-WIBS /4-0 KEPS NUT EXT LW ZP SCREW - #8-8 X.38-LGM PANEL - FAN - ACCESS SWITCH-INTERLOCK BRACKET - CONDENSER FAN MOTOR - 60HZ - EXT. - CAPAC - (5V) MOTOR - 50HZ - EXT. - CAPAC - (30V) BLADE - EVAPORATOR FAN PANEL - PERFORATED 4303 PAN - ABS - EVAPORATOR DRAIN INSULATION-PASSTHRU-CABINET RETAINER-CABINET-NOTCH BRACKET - ANGLE - EVAPORATOR PANEL - EVAPORATOR MOUNT POWER CORD - 4AWG - DOMESTIC - (5V) (NOT SHOWN) POWER CORD - W/BSI PLUG - (30V) (NOT SHOWN) POWER CORD-FOR.-AUSTR./NEW Z. October

58 Section E: Refrigeration Revolution Parts Manual FIGURE 6: REFRIGERATION AIR DUCTS October 006

59 Revolution Parts Manual Section E: Refrigeration TABLE 6: REFRIGERATION AIR DUCTS INDEX PART NUMBER DESCRIPTION QTY CAB.ASSY-INSUL.-BLK.INTERIOR 4303 CAB.ASSY-IN.SEL WHI BLK INTER 4375 COVER - TEMPERATURE SENSOR BUSHING-STRAIN RELIEF PROBE-TEMP. SENSOR STORAGE WALL SHELF - STORAGE PANEL - EVAPORATOR MOUNT SWITCH - INTERLOCK PANEL - FAN - ACCESS PANEL - PERFORATED 434 DUCT - AIR - CORNER 437 PANEL ASSEMBLY - DISCHARGE - AIR PANEL - AIR SUPPLY BRACKET - ANGLE 6 October

60 Section F: Monetary Revolution Parts Manual Section F: Monetary FIGURE 7: MONETARY PANEL October 006

61 Revolution Parts Manual Section F: Monetary TABLE 7: MONETARY PANEL INDEX PART NUMBER DESCRIPTION QTY AP SCREW SELF TAP X.480 LONG DOOR WELD ACCESS PANEL OUTER SHELL 4 AP TRIM VERTICAL METRO 96 5 AP HEADER VINYL 96 6 AP HEADER METRO STYLE AP LOGO PLATE 8 AP40008 SPRING G/M DISPLAY DR SPRING 9 AP300 PIVOT PIN, COIN CUP DOOR 0 AP4404 COIN CUP DOOR AP COIN CUP FRONT TRIM ST BLK AP080 COIN CUP ZINC PLATED 0 3 AP76-8R6 8-3X3/8 PN/NIBS HD T3 BL MAX 4 AP8443 NUT, /4 SELF THREADING, PAL 5 AP SECURITY PLATE COIN CUP TRIM - SIDE - ACCESS PANEL - BLACK SCREW-#6-9 X.3 PHIL.PHS.T/C NUT #8-3 KEPS ZINC PLATE PANEL-SIDE-MONETARY SLIDE-HD, MONETARY PANEL ASSY SCREW-#8 3 X /4 PHS-T/F 4356 BRKT-MONE-COVER LWR COVER-MONETARY-HARNESS SCREW-#8-3 X.50 HX.HD.-T/F-B PRICE DISPLAY ASSEMBLY INSERT-LENS-DISPLAY 9 October

62 Section F: Monetary Revolution Parts Manual FIGURE 8: INTERIOR MONETARY PANEL October 006

63 Revolution Parts Manual Section F: Monetary TABLE 8: INTERIOR MONETARY PANEL INDEX PART NUMBER DESCRIPTION QTY SERVICE KEYPAD ASSEMBLY SELECTION PANEL-TOP SCREW 8-0 X.38 HEX HD TF SWITCH SERVICE LIGHT DM WELD ASSY-MONETARY PANEL HINGE-MONETARY PANEL (REF. ONLY) JUMPER-MONETARY DOOR SWITCH PLATE-FILLER NUT #8-3 X.50 KEPS ZINC SCREW-#8-3X.3 HEX HD.TF-BLK INSERT-INSTR-LOWER-BLANK (IF EQUIPPED) PLATE-BACKING-LOWER-REMOVABLE INSERT INSTR.-LOWER(DOMESTIC) PLATE-BACKING-UPPER-REMOVABLE INSERT INSTR.-UPPER(DOMESTIC) SELECTION PANEL-BOTTOM POS WINDOW POS INSERT PCB ASSEMBLY-DISPLAY SPACER - CUP RETAINER-DISPLAY LENS-NORITAKE INSERT-DISPLAY SPACER DISPLAY 4 October

64 Section F: Monetary Revolution Parts Manual FIGURE 9: UPPER MONETARY - EXTERIOR October 006

65 Revolution Parts Manual Section F: Monetary TABLE 9: UPPER MONETARY - EXTERIOR INDEX PART NUMBER DESCRIPTION QTY 4375 PCB ASSEMBLY-DISPLAY WELD ASSY-MONETARY PANEL PRODUCT GUIDE EDGE TRIM HINGE-MONETARY PANEL (REF ONLY) PANEL-SIDE, MONETARY SWITCH-MEMBRANE,TURRET DIRECT CABLE CLIP PLATE-BACKING-MEMBRANE-SWITCH SCREW-#8-8 X /"PHIL.PAN HD BRACKET-COIN RETURN NUT #8-3 KEPS ZINC PLATE COIN CHUTE ASSEMBLY SPACER-CUP SCREW-HILO-7-9 X 3/8 HEX WASH COIN BLOCK-50 CENTS SHAFT-RETURN BUTTON BUTTON-COIN RETURN PANEL-BACKUP-MONETARY INSERT-COIN BEZEL-COIN INSERT SEL.PANEL-BOTTOM-MONETARY 4368 SCREW-#6-9 X.3 PHIL.PHS.T/C RETAINER-DIRECTION-BUTTONS SPRING-PUSH BUTTON BUTTON-TURRET October

66 Section F: Monetary Revolution Parts Manual FIGURE 30: EXTERIOR MONETARY PANEL October 006

67 Revolution Parts Manual Section F: Monetary TABLE 30: EXTERIOR MONETARY PANEL INDEX PART NUMBER DESCRIPTION QTY WELD ASSEMBLY - ACCESS PANEL 4354 LENS-UPPER POP INSERT-INSTR.-UPPER-SUREVEND PLATE - BACKUP - UPPER TOP HINGE-MONETARY PANEL(REF ONLY) LOCK ASSY-"T" October

68 Section F: Monetary Revolution Parts Manual FIGURE 3: COIN BOX ASSY October 006

69 Revolution Parts Manual Section F: Monetary TABLE 3: COIN BOX ASSEMBLY INDEX PART NUMBER DESCRIPTION QTY 439 MOUNT-COIN BOX SCREW-#8-3X.3 HEX HD.TF MONEY BOX LOCK (ITEMS 4-6, 9) MONEY BOX LOCK- #80, KA NV NUT-LOCK RETAINING WASHER-LOCK BARREL # COIN BOX 7 90 KEY-CHICAGO LK-#80 NV407, KB PLASTIC CARDBOARD AIR BLOCK COVER-POWER PANEL SCREW-#8-3X.3 HEX HD.TF- October

70 Section F: Monetary Revolution Parts Manual FIGURE 3: MONETARY OPTIONS & INTERIOR MONETARY PANEL October 006

71 Revolution Parts Manual Section F: Monetary TABLE 3: MONETARY OPTIONS & INTERIOR MONETARY PANEL INDEX PART NUMBER DESCRIPTION QTY -- CARD READER OPT VALIDATOR - COINCO BP4SX VALIDATOR MARS - VN5 - U5M/ VALIDATOR MARS AE6 - U5M **MDB** SS NUT #8-3 KEPS ZINC PLATE SCREW #8-3 X 3/8 ACORN HEX HD SPACER-RELEASE ARM ARM-SCAVENGER SPRING-SHELF RESET WASHER-SCAVENGER BAR CLAMP-CABLE BRACKET-COIN MECH MAGNET-RETAINR-COIN CHANGER KB NUT #8-3 KEPS ZINC PLATE COIN UNIT - COINCO - 930GX MDB COINCO VORTEX - 3 TUBE COINCO USQ - G70 - MDB - 4 TUBE COINCO USQ - G70 MDB - 4 TUBE COINCO USQ - G7 MDB - 4 TUBE COIN UNIT - TRC65, 95500, CNSN MARS CASH FLOW75,5,5,0,5,$ MARS CASH FLOW75,5,0,5,$,$ MARS CASH FLOW75,5,5,0,5, MARS CASH FLOW75,N,D,Q,$ October

72 Section G: Miscellaneous Revolution Parts Manual Section G: Miscellaneous FIGURE 33: POWER PANEL ASSEMBLY - DOMESTIC (5V) October 006

73 Revolution Parts Manual Section G: Miscellaneous TABLE 33: POWER PANEL ASSEMBLY - DOMESTIC (5V) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY - DOMESTIC SWITCH - TOGGLE - DPST - 0AMP CIRCUIT BREAKER - 4 AMP PANEL - POWER - FRONT - DOMESTIC 4 4 SWITCH V XFMR-DUAL PIR.-.87 TERM INTERFERENCE FILTER TRIAC - 35A - 600V CAPACITOR-MOTOR RUN-0UF RELAY - SPDT 4VDC - PANEL MOUNT NUT #6-3 KEPS ZINC PLATE NUT #8-3 KEPS ZINC PLATE X9/6 PHS MACH SCR ZP 6 October

74 Section G: Miscellaneous Revolution Parts Manual FIGURE 34: POWER PANEL ASSEMBLY - INTERNATIONAL (30V) October 006

75 Revolution Parts Manual Section G: Miscellaneous TABLE 34: POWER PANEL ASSEMBLY - INTERNATIONAL (30V) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY - FRONT - INTERNATIONAL (30V) SWITCH - TOGGLE - DPST - 0AMP CIRCUIT BREAKER - 4 AMP POWER PANEL FRONT INTERNATIONAL(30V) SWITCH - INTERLOCK NUT #8-3 KEPS ZINC PLATE TRIAC - 35A - 600V X9/6 PHS MACH SCR ZP RELAY - SPDT 4VDC - PANEL MOUNT NUT #6-3 KEPS ZINC PLATE CAPACITOR-MOTOR RUN-.5UF 4 SWITCH October

76 Section G: Miscellaneous Revolution Parts Manual FIGURE 35: POWER PANEL ASSEMBLY - REAR - INTERNATIONAL - (30V) October 006

77 Revolution Parts Manual Section G: Miscellaneous TABLE 35: POWER PANEL ASSEMBLY - REAR - INTERNATIONAL (30V) INDEX PART NUMBER DESCRIPTION QTY POWER PANEL ASSEMBLY - REAR COVER-CONTROL-POWER-REAR FILTER-POWER LINE-EMI HARNESS - TRANSFORMERS NUT #8-3 KEPS ZINC PLATE V XFMR - DUAL PIR TERM PANEL - CONTROL - POWER CAPACITOR - MOTOR RUN -.5UF SCREW - #8-3 X 3/8 RHS BUSHING #SB000- October

78 Section G: Miscellaneous Revolution Parts Manual FIGURE 36: SHOPPER WIRING DIAGRAM - DOMESTIC - (5V) October 006

79 Revolution Parts Manual Section G: Miscellaneous DATE BY APPROVED DATE ECO ---- NO. REVISION A # #3 # #4 #5 #6 #7 DESCRIPTION LTR #8 #9 TM WHT WHT WHT WHT WHT WHT WHT WHT WHT WHT TOLERANCES OTHERWISE UNLESS SPECIFIED OPTIONAL DOOR MOTORS DRAWN CHECKED BY APPROVED BY # /4/04 BY FINISH PART NAME D.N. PART NO. MATERIAL SCALE WD NONE WHT WHT WHT WHT WHT BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU BLU DOOR SOLENOIDS 3 ANGLES PLACE FORMED CONCENTRICITY DECIMAL ± ANGLES / EXCEPT ± ±.0 TIR.005 ±.00 BLU A CRANE ST.LOUIS, WD43009.MI #9 CO, MO COMPANY BLU CRANE MERCHANDISING FILE NAME: SYSTEMS IDC J90 CONNECTOR TO 3 RED -CAD DRAWING DO NOT REVISE MANUALLY- UNLESS WISE DIMENSIONS ARE SPECIFIED OTHER- IN INCHES W.D.SHOPPER - 30V WHT WHT WHT # #3 #4 #5 #6 #7 #8 DOOR SOLENOID SWITCHES BLU WHT RED 33 BLU WHT RED3 3 BLU WHT RED 3 3 BLU WHT RED 3 3 BLU WHT RED 33 BLU WHT RED 3 3 BLU WHT RED3 3 BLU WHT RED 33 BLU WHT RED3 3 RED RED RED RED RED RED RED RED RED IDC CONNECTOR TO DRUM BLK BLK BLK BLK BLK BLK BLK BLK MOTOR BLK J J OPTO BLK J93 4 WHT WHT J88 REDBRNBLKBLUWHT YEL 3 3 WHT GRN GRN BLK RED PNK J J59 BLK J49 6 J JA BLK 7 WHT GRN 3 3 BLK BLK JB RED ORN 4 GRY J PRICE DISPLAY STOP PIN PUR BLK J9 3 PCB J49 DRUM BLK JC LOCK J55 INTERFACE PCB J J3 SW. 6 J56 5 BLK 0 SOLENOID DRIVER PCB JD GRY 0 0 BLU 4 BLK 0 BLK J J0 ORN J58 DRUM IDC J LOCK CONNECTOR ORN BLK RED BRN SOL J93 J48 TO BLK RED PNK YEL IDC PURORNGRY YEL BRN DRUM CONNECTOR REDBRNBLKBLUWHT GRN MOTOR PNK TO RED RED NC FAN J34 BRN 3 BLK J3 RED J00 J30 NO 5 J GRY NO CREDIT J45 CONTROLLER BLU 4 NC J39 J38 ORN RED PUR J46 DISPLAY PCB BRN J7 COM SERVICE YELRED ORNBLK J48 G YEL KEYPAD J49 J39 MT COM COM BLK NC NO BLK MONETARY NC J3 J37 J MT MT J36 3 MT J9 GATE RED NO 6 J56 DRUM WHT WHT BLU YEL PUR 3 ORN BLU HOME CABINET J85 J84 J SWITCH J3 TEMP WHT WHT YEL GRY GRY BLU YEL RED PNK YEL EVAP. FAN J86 J COND. COND. RED FAN FAN J93B EXEC. 5 ORN 3 BLU 3 YEL BLU ORN COMP. MECH. PWR. J93A J43 RED BLU DOOR GUIDE HEATERS WHT WHT BLU RED ORN BLU J79A BLK BLK WHT WHT DOOR GLASS HTR J99 J79C J34 HEATER RELAY 4A 4A 4A RED PUR BLK BLU ORN WHT TAN YEL RED 0 J V TRANSFORMERS YEL RED WHT YEL BLU ORN PUR TAN BLK WHT BLU ORN BLU RED YEL RED RED J8A SW LOAD LINE J97 FILTER DOOR SWITCHES LOADING SWITCH J44 LIGHT RELAY J33 RED YEL YEL RED BLK BLK BLK BLK BLK BLK BLK BLK RIGHT LAMP RED J83A SW3 J85A SW5 J87A SW7 J89A SW9 LEFT LAMP REDBLUGRN 3 RED RED YEL YEL J8A SW J84A SW4 J86A SW6 J88A SW8 J33A J33B MDB WHT RED YEL BLU BRN J00 J36 J35 OPTIONAL POP YEL RED BLU BLU RED RED YEL J36B J33B RED YEL NC COM NO NO NC COM J5B J4B J33B J4AJ5A LAMP OPTIONAL P.O.P. 3 3 BLK WHT INTERLOCK J90 TO MAIN SWITCH BALLAST J97 LAMP BLUBRN LOAD LINE BRN BLU U.K. LINE FUSE 3A CORD J97 BLUBRN LOAD LINE BRN BLU J36A MAIN SW FILTER FR./G.R. LINE CORD MAIN SW. & BREAKER FILTER D B A C C FIGURE 37: SHOPPER WIRING DIAGRAM - INTERNATIONAL - (30V) D B A October

80 3 Section G: Miscellaneous Revolution Parts Manual J J33B WD HARNESS - POWER PANEL J84 J7 J83 AMP COM QTY. 4 J33 POS.A N.C. J99 AMP QTY. FILTER POS.B J97 N.C. HEATER RELAY J34 COM J43 J8 POS.A J34 POS.B J97 J33 J9 J00 EVAP FAN SW GATE COLD J00 DOOR SW QTY. TERMINAL: MX J3 QTY. V LIGHTS V V MX QTY. MX QTY. 6 V MX QTY. MX QTY. EVAP HOUSING: MX QTY. TERMINAL: MX QTY.4 INTERFACE 3 MX QTY. MX QTY. 4 MX QTY. MX QTY. 6 RELAYS MX QTY. MX QTY. 3 J93 J07 RED.0 WHT.0 WHT 6.0 BLU REF 3.0 REF LIGHT RELAY LIGHT CONTROL 5.0 REF.5 REF PUR.5 BLK S S S TURRET SW TEMP SENSE Y S TRANS OUTPUT S T T S S S S V V V V V TRANS INPUT V V V MT 3.5 REF RED 8.0 YEL 8.0 PUR PUR BLK BLK BLU BLU REF YEL 6.5 ORN GRN/YEL 9.0 YEL 6.0 RED RED FILTER YEL RED.0 REF RED 8.0 C L.5 BLU.0 YEL.0 GRY WHT YEL 4.5 RED YEL PNK YEL RED ORN 5.0 YEL YEL 9.5 BLU 9.5 RED 9.5 TAN RED.5 ORN MT ORN WHT BLU RED 9.0 ORN.5 BLK PUR.0 GRY.0 PUR 6.0 V ORN 6.0 V V V V V V V V V MX QTY. MX QTY. 0 T T T T ETCO PD 63 OR AMP QTY TRIAC ETCO PD65 OR AMP QTY. LOAD SWITCH HOUSING: MX HOME SWITCH COLD DOOR AMP QTY. AMP QTY. 4 S S 8.0 RED S V MX QTY. MX QTY. HOME SWITCH AMP QTY. V V V V J94 J96A AMP 359 QTY. 3.0 REF.0 REF AMP QTY. HEATER AMP QTY. 4 HEATER CONTROL AMP QTY. 4 MAIN SW AMP QTY. FIGURE 38: HARNESS DIAGRAM - POWER PANEL AMP QTY 6 J96B HEATER J96C PCB PWR HOUSING: AMP QTY AMP QTY 3 COMP wd October 006

81 Revolution Parts Manual Section G: Miscellaneous TABLE 36: 43 HARNESS LIST PART NUMBER DESCRIPTION JUMPER - MONETARY DOOR SWITCH HARNESS - DATA PRINTER INTERFACE HARNESS - CONTROL TO DISPLAY FLUORESCENT LIGHT FILTER - 0/30V HARNESS - "MDB" COIN & VALIDATOR HARNESS - DEX INTERFACE JUMPER - 30V - XFMR PRIMARY HARNESS - COMPRESSOR HARNESS - LAMP TO POWER PANEL HARNESS - POWER PANEL TO PCB HARNESS - TRANSFORMERS HARNESS - POWER PANEL HARNESS - LAMP TO BALLAST HARNESS - CABINET DC HARNESS - POP - BALLAST (NOT SHOWN) 4390 HARNESS - DOOR AC HARNESS - PRICE DISPLAY HARNESS - POWER PANEL - 30V HARNESS - 4V TEMP & SWITCH HARNESS - POP LAMP HARNESS-EVAP FAN & TEMP HARNESS - TURRET SWITCH CABLE ASSEMBLY - 6 CONDUCTOR HARNESS - VEND DOOR JUMPER-SWITCH & SOLENOIDS 7908 HARNESS - POWER CORD TO PANEL October

82 Section G: Miscellaneous Revolution Parts Manual TABLE 37: BAG ASSEMBLY: 5 - B (5V) PART NUMBER DESCRIPTION QTY WD43008 WIRING DIAGRAM - 43 SHOPPER - (5V) PLASTIC BAG LABEL - INSTRUCTIONS - ALT $ & $5 - EXT OPERATORS GUIDE - SHOPPERTRON 4368 SCREW-#6-9 X.3 TMPR.PRF EA LIST - WIRE HARNESSES 4386 STOP - VEND-DOOR 4 TABLE 38: BAG ASSEMBLY: 5 - B43000 (30V) PART NUMBER DESCRIPTION QTY WD43009 W.D SHOPPER - (30V) PLASTIC BAG LABEL - INSTRUCTIONS - ALT $ & $5 - EXT OPERATORS GUIDE - SHOPPERTRON 4368 SCREW-#6-9 X.3 TMPR.PRF EA LIST - WIRE HARNESSES 436 STOP - VEND-DOOR COIN CHUTE & BRACKET ASSEMBLY INSTR.SHEET-COIN CHUTE & BRKT October 006

83 Terms and Conditions of Sale LIMITED WARRANTY: Subject to the limitation specified herein, all parts included on original equipment manufactured by CRANE MERCHANDISING SYSTEMS and sold to purchaser are warranted for two () years from the date of shipment of the equipment in question. This warranty applies only to the original purchaser of the Merchandiser and is null and void if the Merchandiser is sold during the period of warranty. Defective parts will be repaired or replaced free of charge when the defective part is returned, with transportation charges prepaid by purchaser, to a destination designated by CRANE MERCHANDISING SYSTEMS. This warranty does not include any cost of service rendered or repairs made by customer or its agents on Merchandiser, or parts, unless authorization to incur such expense has been given in writing by CRANE MERCHANDISING SYSTEMS prior to incurring such expense. This warranty covers labor and service charges performed by CRANE MERCHANDISING SYSTEMS service technicians for the first 90 days of ownership from date of shipment. This warranty does not apply to A) electrical components, wiring, or circuits or mechanical parts or assemblies damaged as a result of operating the Merchandiser at other than the design voltage and frequency specified on the Electrical Rating Tag, or B) in event of vandalism, fire or negligence, or C) incandescent lamps, neon lamps, fluorescent lamps, ballasts, starters or other expendable items, or D) when seal is broken on electronic boards, or E) when other manufactured components are installed in CRANE MERCHANDISING SYSTEMS Merchandisers. Replacement parts sold by CRANE MERCHANDISING SYSTEMS as After Market shall be covered for three months from the date shown on the parts invoice. Purchaser must obtain prior RETURN AUTHORIZATION for return of all parts, following guidelines given by CRANE MERCHANDISING SYSTEMS. New, unused parts purchased as After Market can be returned within 30 days from date of parts invoice, with prior authorization from CRANE MERCHANDISING SYSTEMS. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR PURPOSE. CRANE MERCHANDISING SYSTEMS SHALL NOT BE RESPONSIBLE FOR CONSEQUENTIAL OR PUNITIVE DAMAGES. CRANE MERCHANDISING SYSTEMS neither assumes nor authorizes any person to assume for it any obligation or liability in connection with the sale of said equipment or any part thereof.

84