ED/ID30. 1 Overall Base Assembly. 2 Base Left Assembly. 3 Base Right Assembly. 4 Tank Assembly. 5 Tank Parts. 6 Outer Case Assembly

Size: px

Start display at page:

Download "ED/ID30. 1 Overall Base Assembly. 2 Base Left Assembly. 3 Base Right Assembly. 4 Tank Assembly. 5 Tank Parts. 6 Outer Case Assembly"

Bonnie Pearson
5 years ago
Views:

1 ED/ID30 Page # Sheet Title 1 Overall Base Assembly 2 Base Left Assembly 3 Base Right Assembly 4 Tank Assembly 5 Tank Parts 6 Outer Case Assembly 7 Circulation Pump/Sump Asy. 8 Upper Rack Assembly 9 Lower Rack Assembly 10 Bezel/Control Board Assembly 11 Door Liner Assembly 12 Outer Door Assembly 13 Outer Door Parts Revised

2 ED/ID30 Overall Base Assembly Asy, Base Side, Left Grommet, EDPM Back Cover Trim Lock Drain Screw, Phil wfr, #8 x 3/ Asy, Base Side, Right Screw, #10 x 3/ Rear Leveller Support Pump Bushing, Snap Brace Wire Harness Base * Adjustment Rod* Front Leveler Bushing, Snap 3/ Locknut, Front * E-Ring* *Order as Kit, (Click note for Details)

3 ED/ID30 Base Left Assembly Screw, Phil HD, Washer, 1.0 x Nut, Nylon, 1/ Grommet, EPDM 1 ID Clip, Heyco, Push In Wire Holder Screw, SM, #4 x.63l Microswitch Float Front Leveler Front Lock nut * Asy, Bitron Valve Retrofit Kit Screw, Wafer Head, #8 x 3/ Elbow, 3/8 x 3/ Hose, Inlet Braised Hose, Inlet Valve to Air Break Clamp Base Side, Left *Order As Kit, (Click Note for Details)

4 ED/ID30 Base Right Assembly Power Supply Cord Back Cover Strain Relief, Power Cord Quick Release Board Mount Card Guide Mounting Plate, Power Board Nylon Nut, 1/ Base Side, Right Insulation Spring Hinge Spring Shoulder Bolt, 5/16 x 1/ Pulley Cable Asy Shoulder Bolt, 5/16 x 1/ Spring Door Pully Hinge Insulation Screw, Phil wfr, #8 x 3/ Screw, x 1/ Washer 1.00 x Wire Harness Base Trim Edge, Power Board Bttm Trim Edge, Power Board Side * Power/Control Board Kit* *Order as Kit, (Click note for Details)

5 ED/ID30 Tank Assembly

6 ED/ID30 Tank Parts Asy, Tub, Asy, Filter Filter Inner Asy Strainer * Sump Locking Nut* ** Nut, #8-32, SS** ** Washer, Flat** Washarm, Lower * Gasket, Sump* Slide, Left Slide, Right Gasket, Spacer, Slide Nut, Keps, 1/ Guide Nut, Hex, # Buttom Head CS Sump, Check Valve Asy Seal, Door, *** Asy, Air Break*** Water Feed Tube Striker Door Latch ** Seal, Lower Wash Arm Fitting** ** Asy, Lower Wash Arm Fitting** *** Air Break Seal*** Asy, Top Sprayer ** Nut, Lower Wash Arm Fitting** Keeper, Door Latch Screw, #4-40 x 3/ O-Ring,.125 x Screw, M6, Shakeproof Nut, Keps, #10-32, SST Screw, Pan HD Phil Nut, Hex, # Bumper *Order as Kit, (Click note for Details) **Order as Kit, (Click note for Details) ***Order as Kit, (Click note for Details) Part # Required for ED30 Rev. A & B Asy, Rack, Upper, Asy, Rack, Retrof Kit Description Note: Kit is required on models in order to fit Requires tank modification.

7 ED/ID30 Outer Case Assembly Case Side, Left Screw, Phil, #8 x 3/ Case Side, Right Screw, #14 x 1/ Asy, Base Cover Toekick Asy Toekick Mtg. Plt. Asy.

8 ED/ID30 Circulation Pump/Sump Assembly * Sump* Valve, Check Sump Clamp Hose, Sump to Heater Heater Drain Hose Clamp Hose, Main Pump to Wash Arm Hose, Heater to Pump Circulation Pump Mounting Bracket Nut, M Keps Screw, #10 x 3/ Capacitor Screw, M6 x 12 Phil Support Pump Brkt Drain Pump Drain Pump Clamp Hose, Sump to Drain Screw, M3.5 x ** Asy, Turbidity Sensor** *** Asy, Pressure Switch Kit*** ** O-Ring *Order as Kit, (Click note for Details) **Order as Kit, (Click note for Details) ***Order as Kit, (Click note for Details)

9 ED/ID30 Upper Rack Assembly Rack, Upper, Wash Arm, Upper Washer, Flat Nut, #8-32, SS Tube between Spinners ** Fitting, Upper, Spray Arm** * Receptacle, Upper, Adjustable* * Water Receptacle, Grommet* ** Clip, Snap-In** Tine Receiver, RH Tine Receiver, LH Holder, Tine Type-A Dish Rack, Upper, RH, Adjustable Dish Rack, Upper, LH, Adjustable *Order as Kit, (Click note for Details) **Order as Kit, (Click note for Details)

10 ED/ID30 Lower Rack Assembly Lower Rack Asy. (Parts 2-9) 2 Non-Replaceable Tine Cap, Blue Dish Rack Lower, LH Adjustable Dish Rack Lower, RH Adjustable Holder, Tine-Type A Tine Receiver, RH Tine Receiver, LH Rack, Lower, Asy, Roller Silverware Basket Asy. (2 per unit)

11 ED/ID30 Bezel/Control Board Assembly Bezel Membrane Asy, Mounting Bezel Bracket Screw, Phil, K3510 x.38, Zinc Cable Membrane Screw, Washer Head Mtg. Plate Control Board PCB Support, Nylon Power/Control Board Kit Wire Harness, Control Board Wire Harness, Door

12 ED/ID30 Door Liner Assembly Ref # Part # Description Hose, Latch Drain Door Latch Asy, w/ Connectors Detergent Dispenser Screw, M40 x 12mm Door Liner * Screw, Phil Pan, #8 x 1/4* * Bracket, Door Seal MTG, 30 * * Seal, Bottom Door, 30 * Dispenser Bracket Screw, #8 x 1/ Screw, Washer HD, #10-32 x 3/ Screw, Washer HD, #8 x 3/8 *Order as Kit, (Click note for Details)

13 ED/ID30 Outer Door Assembly

14 ED/ID30 Outer Door Parts Ref # Part # Chrome Part # Copper Part # Black Part # Brass Description SCH 13858SCP 13858SBC 13858SBR Asy, Handle Handle, CH CP BC BR End Cap, Door Handle Screw, #6-32 x 5/16, End Cap Brkt Bezel Mounting, Clip, U-Type Service Asy, Door Skin Heyco Clip # CH 72511CH 72511CH 72511CH Dacor Logo, Chrome * 72487* 72487* 72487* LED* * 83611* 83611* 83611* Screw, Phil, #2 x 1/2 * Service Asy, Hinge Asy, Right Door Brace, Service Asy, Hinge Asy, Left Screw, #10-32 x 3/8 *Order as Kit, (Click Note for Details)

ED/ID/PD/MDV/MDH ED Door Assembly. 2 ID Door Assembly. 3 MDH/MDV Door Assembly. 4 PD Door Assembly. 5 Bezel Assembly.

ED/ID/PD/MDV/MDH ED Door Assembly. 2 ID Door Assembly. 3 MDH/MDV Door Assembly. 4 PD Door Assembly. 5 Bezel Assembly. ED/ID/PD/MDV/MDH Page # Sheet Title ED Door Assembly ID Door Assembly MDH/MDV Door Assembly PD Door Assembly Bezel Assembly Tank Assembly Tank Parts List 8 Upper Rack Assembly Lower Rack Assembly 0 Base