RSD Range. DACOR CARES PROGRAM NLA Part Locator Service

Transcription

1 RSD Range IMPORTANT: This product may have some parts that are No Longer Available (NLA). If the part you need is no longer available, please contact Dacor for a possible solution: DACOR CARES PROGRAM NLA Part Locator Service Customer Contact Number: (800) ex Hours: 6:00 am - 5:00 pm Pacific Time Web Inquiries: Please provide the following information: Your name and phone number Product model number Service Agent/Technician Contact Number: (800) ex Hours: 7:00 am - 4:00 pm Pacific Time Inquiries: dacorcares@dacor.com Product serial number The part number(s) you need Page Description 2 Door Assembly (Rev D and Earlier) 3 Door Assembly (Rev E and Later) 4 Sub-Chassis Assembly 5 Base Assembly 6 Gas Tubing/Control Assembly 7 Oven Case Assembly 8 Manifold Assembly 9 Control Panel/Trim 10 Top Frame Assembly Revised

2 RSD Range Door Assembly (Rev D and Earlier) Item Part Description OBSOLETE [*] FRAME, GLASS MOUNTING GLASS/OVERLAY ASSEMBLY GASKET, DOOR OBSOLETE WINDOW PACK (10X16, double) BP J -TRIM WINDOW PACK, (black porcelain) THERMOCORD, WINDOW PACK [*] HANDLE TAPE, DOUBLE SIDED,.30 THK Item Part Description HINGE (stainless front) HINGE (use for black and white units) INSULATION BP LINER, INNER LINER, OUTER B HEAT SHIELD SHIELD, LEFT SHIELD, RIGHT * Letter at end of part number indicates color: A = almond B = black R = arctic white Page 2

3 RSD Range Door Assembly (Rev E and Later) Item Part Description OBSOLETE [*] FRAME, GLASS MOUNTING GLASS/OVERLAY ASSEMBLY GASKET, DOOR OBSOLETE WINDOW PACK [*] HANDLE TAPE, DOUBLE SIDED,.30 THK * Letter at end of part number indicates color: A = almond B = black R = arctic white HINGE (stainless front) HINGE (use for black and white units) INSULATION BP LINER, INNER BP LINER, OUTER B HEAT SHIELD SHIELD, LEFT SHIELD, RIGHT DOOR BUMPERS (not shown) Page 3

4 RSD Range Sub-Chassis Assembly COOLING FAN SUB CHASSIS TERMINAL BLOCK, 2-POLE DUCT TRANSITION HEAT SHIELD FUSE BOX ASSEMBLY FUSE, 15 AMP FUSE, 15 AMP CSA SINGLE SOCKET FUSE, 30 AMP /2 FLEX, 90 DEGREE CONNECTOR BACK COVER EXHAUST COVER DIVIDER EXHAUST DUCT CONNECTOR, 1/2 FLEX, STRAIGHT CONDUIT LEAD WIRE KIT, (UL) LEAD WIRE KIT, (CSA) Page 4

5 RSD Range Base Assembly ADAPTER, 3/8 FPT TO 3/8 TUBE GAS TUBE RACEWAY, GAS TUBE ADAPTER, 1/2 MNPT TO 3/8 TUBE BRACKET, INLET FITTING SUPPORT, STORAGE PANEL NUT, 8-32 KEPS WASHER, NYLON SHOULDER SCREW 10 & FRONT PANEL (stainless) 26851[*] FRONT PANEL HINGE CATCH, MAGNETIC LINER, STORAGE PANEL BRKT, STORAGE COMP. MTG LEVELER, ADJUSTABLE, 5/ LEVELER, ADJUSTABLE, 1/ ASSY, BASE, RANGE (uses 1/2 leveler) BRACKET, ANTI-TIP ASSY, STIFFENER, BASE EXHAUST PLATE ASSEMBLY B ASSEMBLY, STORAGE COMPARTMENT 1 Includes items 7, 8 and 9. * Letter at end of part number indicates color: A = almond B = black R = arctic white Page 5

6 RSD Gas Tubing/Control Assembly IGNITER WIRES (set of 4) SPARK MODULE, 4 POINT SIDE SUPPORT ASSEMBLY, LEFT SPARK BOX PLATE JUMPER WIRES, LIGHTS/SWITCHES IGNITER HARNESS BURNER TUBE/BASE, LEFT REAR BURNER TUBE/BASE, FRONT BURNER TUBE/BASE, RIGHT REAR BURNER SUPPORT CHANNEL SIDE SUPPORT ASSEMBLY, RIGHT 1 Attaches with Velcro TERMINAL BLOCK REAR PANEL ASSEMBLY PCB SUPPORT, NYLON RELAY PCB, 105 C ASSEMBLY, AIR BAFFLE PUSH TIE PUSH TIE STANDOFF, 6/32 X.438 LG, 1/4 HEX PCB MOUNTING PLATE HARNESS, ERC TO RELAY PCB 2 Two used. Each requires screw (PN 83054) and nut (PN 83308). Page 6

7 RSD Range Oven Case Assembly CASE TOP DOOR LATCH MECHANISM LATCH PLATE OVEN CELL (not replaceable) ASSY, CASE SIDE, LEFT SUPPORT RACK OVEN RACK PLATED GRILL, BROILER PAN PORCELAIN PAN BROIL ELEMENT, 3000W, 240V BAKE ELEMENT, 2200W, 240V FILTER, CONVECTION BP CONVECTION BAFFLE CONVECTION ELEMENT, 240V FAN BLADE, CONVECTION SMOKE ELIMINATOR LIGHT SERVICE KIT LIGHT BULB HEAT SHIELD, STORAGE RECEPTACLE, HINGE, DOOR ASSY, CASE SIDE, RIGHT TEMPERATURE SENSOR ASSY, CONV. MOTOR MOUNTING PLATE CONVECTION MOTOR CASE BACK TERMINAL BLOCK COVER COVER PLATE, LIGHT THERMAL SWITCH, HI-TEMP CUTOUT EXHAUST TUBE B/S/R 3 INCH SIDE PANEL, RIGHT B/S/R 3 INCH SIDE PANEL, LEFT 1 Must order kit # Includes latch, latch plate and 6 screws. Page 7

8 RSD Range Manifold Assembly Item Nat. Gas Part # LP Part # Description BUSHING, 5/8 DIA ASSY, MANIFOLD ENCLOSURE C-AIR SHUTTER C-VALVE W/JETS, LEFT REAR, EARLY C-VALVE W/JETS, LEFT REAR, LATER MICROSWITCH B-VALVE W/JETS, LEFT FRONT, EARLY B-VALVE W/JETS, LEFT FRONT, LATER B-AIR SHUTTER GAS VALVE, 90, 3/8 NPT REGULATOR, 1/2 X 1/ MANIFOLD ASSEMBLY, COMPLETE 1 After 6/25/96 this part number changed to Pry-out plug (PN 83387) is needed to block the right hole when replacing older enclosures. 2 For units prior to serial number FD Item Nat. Gas Part # LP Part # Description C-VALVE W/JETS, RIGHT FRONT, EARLY C-VALVE W/JETS, RIGHT FRONT, LATER B-VALVE W/JETS, RIGHT REAR, EARLY B-VALVE W/JETS, RIGHT REAR, LATER B-AIR SHUTTER C-AIR SHUTTER GROMMET, EPDM RUBBER BRACKET, MTG., ENCLOSURE SEAL, SHUT-OFF VALVE ENCLOSURE TOP, MANIFOLD BRASS PLUG, MANIFOLD (not shown) 3 For units starting at serial number FD and later. 4 Replace bushing (PN 62437), when replacing regulator. 5 Replace with Regional Service Manager approval only. Page 8

9 RSD Range Control Panel/Trim [*] 1 MEMBRANE [*] 1, 2, 3 BEZEL ASSEMBLY [*] KNOB [*] TRIM POST, LEFT B CONTROL BEZEL TRIM B INTAKE GRILL [*] EXHAUST GRILL NAMEPLATE, SELF CLEAN [*] TRIM POST, RIGHT INDICATOR LIGHT [*] SPILL PROTECTOR OVEN CONTROL * Letter at end of part number indicates color: A = almond B = black R = arctic white 1 Use black for almond units. 2 Four indicator light assemblies (PN 82233) are are also required for the following units: Almond and black models before serial number FA Stainless models before serial number FA Arctic white models before serial number FA Bezel alone: 92349[*]. 4 Includes membrane and mounting brackets. Page 9

10 RSD Range Top Frame Assembly BM 1 GRATE PACK GRATE SUPPORT PAD KIT (4 pads per kit) IGNITOR ASSEMBLY [**] TOP FRAME O-RING, B - BURNER HEAD B - BURNER HEAD ASSEMBLY, W/IGNITER BRASS NUT; B/C - BURNER HEAD 1 On Rev. E and earlier units, all 3 grates must be replaced at the same time due to a grate dimension change. ** Letters at end of part number indicate color: AP = almond BP = black RP = arctic white SG = stainless BRASS NUT; B/C - BURNER HEAD B - BURNER RING 9 524BM B - BURNER CAP, (medium sized) BM C - BURNER CAP, (large sized) C - BURNER RING C - BURNER HEAD ASSEMBLY, W/IGNITER O-RING, C - BURNER HEAD 2 Burner ring kit part # (set of 4) should be used when replacing all 4 igniters or burner assemblies. Units with a revision of N or higher will have the individual part number (old) style of rings. Page 10