Bronze valves Brass valves
|
|
- Nelson Porter
- 6 years ago
- Views:
Transcription
1 Bronze valves Brass valves for Building and General Industry Export Department Ph: Fax:
2 Fig. BB11 ast Bronze Gate Valve PN16 lass 125 / Non - rising stem, Screwed, omply to BS5154 Fig. BB11 Bronze 1400 G usn5zn5pb5 Bonnet Bronze 1400 G usn5zn5pb5 Disc Bronze 1400 G usn5zn5pb5 Stem Brass 2874 Z uzn40pb2 andwheel Alumium 1490 M onnected Screw orking Pressure 16 bar ( Non - Shock ) at - 10 to 100 o ydraulic Test Pressure Fig. BB12 ast Bronze Globe Valve PN16 lass 125 / Rising stem, Screwed, omply to BS5154 Fig. BB12 Bronze 1400 G usn5zn5pb5 Bonnet Bronze 1400 G usn5zn5pb5 Disc Bronze 1400 G usn5zn5pb5 Stem Brass 2874 Z uzn40pb2 andwheel Alumium 1490 M bar ( Non - Shock ) at - 10 to 100 o BANFF VAVE IN. AGARY, ABERTA, ANADA BB1
3 Fig. BB13 ast Bronze Y - Strainer lass 125 / Screwed, PN16 Fig. BB13 Bronze 1400 G usn5zn5pb5 ap Bronze 1400 G usn5zn5pb5 Gasket PTFE Screen Stainless Steel S X5rNi bar ( Non - Shock ) at - 10 to 100 o 24 bar Fig. BB14 ast Bronze Swing heck Valve PN16 lass 125 / Screwed, omply to BS5154 Fig. BB14 Bronze 1400 G usn5zn5pb5 ap Bronze 1400 G usn5zn5pb5 Disc Brass 2874 Z uzn36pb2 inge pin Stainless Steel S X5rNi bar ( Non - Shock ) at - 10 to 100 o BANFF VAVE IN. AGARY, ABERTA, ANADA BB2
4 Fig. BB21 Brass Gate Valve PN16 lass 125 / Non - rising stem, Screwed, omply to BS5154 Fig. BB21 Brass 2874 Z uzn40pb2 Bonnet Brass 2874 Z uzn40pb2 Disc Brass 2874 Z uzn40pb2 Stem Brass 2874 Z uzn40pb2 andwheel Iron 1452 Grade bar ( Non - Shock ) at - 10 to 100 o Fig. BB22 Brass Globe Valve PN16 lass 125 / Rising stem, Screwed, omply to BS5154 Fig. BB22 Brass 2874 Z uzn40pb2 Bonnet Brass 2874 Z uzn40pb2 Disc Brass 2874 Z uzn40pb2 Stem Brass 2874 Z uzn40pb2 andwheel Iron 1452 Grade bar ( Non - Shock ) at - 10 to 100 o BANFF VAVE IN. AGARY, ABERTA, ANADA BB3
5 Fig. BB23 Brass Y - Strainer lass 125 / Screwed, PN16 Fig. BB23 Brass 2874 Z uzn40pb2 ap Brass 2874 Z uzn40pb2 Gasket PTFE Screen Stainless Steel S X5rNi bar ( Non - Shock ) at - 10 to 100 o 24 bar Fig. BB24 Brass Swing heck Valve PN16 lass 125 / Screwed, omply to BS5154 Fig. BB24 Brass 2874 Z uzn40pb2 ap Brass 2874 Z uzn40pb2 Disc Brass 2874 Z uzn40pb2 inge pin Brass 2874 Z uzn40pb bar ( Non - Shock ) at - 10 to 100 o BANFF VAVE IN. AGARY, ABERTA, ANADA BB4
6 d Fig. BB31 ast Bronze Gate Valve PN25 lass 150 / Non - rising stem, Screwed, omply to BS5154 Fig. BB31 Bronze 1400 G usn5zn5pb5 Bonnet Bronze 1400 G usn5zn5pb5 Disc Bronze 1400 G usn5zn5pb5 Stem Brass 2874 Z uzn36pb2 andwheel Alumium 1490 M bar ( Non - Shock ) at - 10 to 100 o 37.5 Bar 27.5 bar Fig. BB32 ast Bronze Globe Valve PN25 lass 150 / Rising stem, Scr ewed, omply to BS5154 Fig. BB32 Bronze 1400 G usn5zn5pb5 Bonnet Bronze 1400 G usn5zn5pb5 Disc Bronze 1400 G usn5zn5pb5 Stem Brass 2874 Z uzn36pb2 andwheel Alumium 1490 M bar ( Non - Shock ) at - 10 to 100 o 37.5 Bar 27.5 bar BANFF VAVE IN. AGARY, ABERTA, ANADA BB5
7 Fig. BB33 ast Bronze Y - Strainer lass 150 / Screwed, PN25 Fig. BB33 Bronze 1400 G usn5zn5pb5 ap Bronze 1400 G usn5zn5pb5 Gasket PTFE Screen Stainless Steel S X5rNi bar ( Non - Shock ) at - 10 to 100 o 37.5 bar Fig. BB34 ast Bronze Swing heck Valve PN25 lass 150 / Screwed, omply to BS5154 Fig. BB34 Bronze 1400 G usn5zn5pb5 ap Bronze 1400 G usn5zn5pb5 Disc Brass 2874 Z uzn36pb2 inge pin Stainless Steel S X5rNi bar ( Non - Shock ) at - 10 to 100 o 37.5 Bar 27.5 bar BANFF VAVE IN. AGARY, ABERTA, ANADA BB6
8 Fig. BB25 Brass Ball Valve lass 150 / Screwed, PN25 Fig. BB25 Brass 2874 Z uzn40pb2 ap Brass 2874 Z uzn40pb2 Ball Brass (hrome Plated) 2874 Z uzn40pb2 Stem Brass 2874 Z uzn40pb2 andle Steel M bar ( Non - Shock ) at - 10 to 100 o 37.5 Bar 27.5 bar Fig. BB35 ast Bronze Ball Valve lass 150 / Screwed, PN25 Fig. BB35 Bronze 1400 G usn5zn5pb5 cap Bronze 1400 G usn5zn5pb5 Ball Brass (hrome Plated) 2874 Z uzn40pb2 Stem Brass 2874 Z uzn40pb2 andle Steel M bar ( Non - Shock ) at - 10 to 100 o 37.5 Bar 27.5 bar BANFF VAVE IN. AGARY, ABERTA, ANADA BB7
9 Bronze and Brass Valves Installation Manual 1. leaning Prior to pipe connection, remove sand, mud, molten spatter deposits and any other foreign materials from the interior of the pipes to be connected to the valve. 2. Thread utting are should be taken not to thread-cut the pipes excessively. are should be taken not to overtighten the pipe connected to the valve. If the pipe is inadvertently screwed deep into the threaded chamber of the valve, it may deform the body seat. 3. Valve Installation - Remove any sward from the thread-cut portion of the pipe, then wrap with Teflon tape, or apply a thin coat of an appropriate liquid sealant (pipe compound), to that portion. The liquid sealant should be selected with due consideration to the kind and temperature of the fluid, and must be applied on the thread of the pipe. - hen a screwed-end valve will be connected to the pipe, be sure to hold the pipe in the pipe vice and screw the valve onto it. In this case, always apply the wrench to the connected end of the valve. To connect the valve and pipe, always hold the pipe in a pipe vice, and apply the wrench onto the connected end of the valve. 4. Disassembly and Reassembly Should repairing or other services require the valve to be held in a vice, secure the valve by holding its end-to-end portion between the jaws of the vice. For flange-type valves, protect their gasket seats by applying copper of lead protectors onto the jaws of the vice. 5. anger Inspection Proper installation and maintenance of the pipe hangers are essential for the proper functioning of the valve installed. The valve and adjoining pipes should always be kept in a straight line. 6. Prevention of Errors in Valve Operation Improper valve operation has caused many accidents in the past. For lines with high risk of accidents due to valve operation errors, appropriate markings (tags, colour-coded classification, signs) should be provided, and at the same time, infrequently used valves should be locked and/or sealed, with a sign indicating the location of the key. BANFF VAVE IN. AGARY, ABERTA, ANADA BB8
10 AGENT: BANFF VAVE IN algary, Alberta, anada opyright Banff Valve Inc. Information given in this brochure may not be reproduced complete or in part without the prior written consent of Banff Valve Inc.
SECTION VALVES PART 1 - GENERAL
1.01 RELATED DOCUMENTS SECTION 15100 VALVES PART 1 - GENERAL A. The work in this section includes the furnishing and installation of all control valves and accessories shown on the construction plans and
More informationCONTENTS. Bronze Ball Valve (Threaded) 1. Bronze NRS Gate Valve (Threaded) 2. Bronze RS Gate Valve (Threaded) 3. Bronze Swing Check Valve (Threaded) 4
CONTENTS Bronze Ball Valve (Threaded) 1 Bronze NRS Gate Valve (Threaded) 2 Bronze RS Gate Valve (Threaded) 3 Bronze Swing Check Valve (Threaded) 4 Bronze Globe Valve (Threaded) 5 Bronze Y - Strainer (Threaded)
More informationA. This Section includes general duty valves common to several HVAC piping systems.
SECTION 23 05 23 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationCV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE FEATURES SPECIFICATIONS PRODUCT IDENTIFICATION SYSTEM PRODUCT DATA
CV-SFS4-PN16 SERIES SLIENT CHECK VALVE, GLOBE TYPE Silent check function Temperature -10 ~ +120 PRODUCT IDENTIFICATION SYSTEM 2 Disc Ductile iron GGG 40 3 Spring Stainless steel SUS304 4 Bush Bronze 1400
More informationflowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)
flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell
More informationValves for building. Y-strainers... page 204 PVC valves Ball valves... page 204 Butterfly valve... page 204 Ball check valve...
Valves for building Ball valves PN25/20... page 194 PN30/20... page 195 PN40/30 - Lead-free brass... page 196 Valve for gas... page 197 Stem extension valves... page 197 3 way valves... page 197 Mini valves...
More informationValves for building. Y-strainers... page 272 PVC valves Ball valves... page 272 Butterfly valves... page 272 Ball check valves...
Valves for building Ball valves PN25/20... page 262 PN30/20...pages 262 to 263 PN40/30 - Lead-free brass... page 264 Valve for gas... page 265 Stem extension valves... page 265 3 way valves... page 265
More informationBronze Gate Valves. SECTION 2a. Tel: +44 (0) Fax: +44 (0)
SETION 2a ronze Gate Valves Tel: +44 (0)1695 712800 Fax: +44 (0)1695 712820 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents ronze Gate Valves ontents Page Figure Number Index
More informationApproved. Size L H. 3" (76mm) 9-1/2" (241mm) 5-51/64" (147mm) 46. 4" (102mm) 11-1/2" (292mm) 6-45/64" (170mm) 81
pproved. Model: SD-NRV200CV Flanged Ends The Flanged End Check Valves are made of Iron Body, Bolted Bonnet and Horizontal Swing, painted with standard color. Epoxy coated inside and outside to WW C550
More informationSECTION VALVES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections:
More informationO IL & G AS INDUSTRIAL VALVES, ACTUATORS & ACCESORIES
O IL & G AS O IL & G AS License Number 6D-1724 FORGED STEEL Size Range Ball Valves API 6D / BS EN ISO 17292 Gate Valves Globe Valves API 602 / BS EN ISO 15761 Class 150-2500 / Class 800 ½ - 2 Check Valves
More informationVB VALVES & AUTOMATION
Introduction to Valve What are Valves? Valves are mechanical device that controls the flow and pressure within a system or process. They are essential components of a piping system that conveys liquids,
More informationCast-Iron Valves G101 DI BUTTERFLY VALVE LEVER... 2 G401 CI GLOBE VALVE CL G403 CI GLOBE VALVE PN G103 DI BUTTERFLY VALVE GEAR...
Cast-Iron Valves PAGE G101 DI BUTTERFLY VALVE LEVER.... 2 PAGE G401 CI GLOBE VALVE CL125.... 9 G103 DI BUTTERFLY VALVE GEAR.... 3 G403 CI GLOBE VALVE PN16.... 10 G201 CI Y STRAINER CL125.... 4 G501 CI
More informationACE VALVE COMPANY LIMITED
Gate & Globe Valves ACE COMPANY LIMITED ttp://www.acevalve.co.kr Mangdeokri, Juchonmyun, Gimhae, Gyeongnam, Korea. TEL +000 FAX +0~ Email acevalve@acevalve.co.kr omepage www.acevalve.co.kr 0.0. ACE CATALOG
More informationProduct Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size Gate Valve Globe Valve Check Valve
Product Range Neway Cast Carbon Steel Gate,Globe & Check Valves. Valve Size 2" 2.5" 3" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 26" 28" 30" 32" 36" 40" 42" 48" 52" 54" 56" 60" 64" 150 300 API 600 & B16.34
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2011 Supersedes BIV-01-11 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE GATE VALVES
More informationSECTION GENERAL-DUTY VALVES FOR HVAC. A. Section includes valves for building services piping.
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section includes valves for building services piping. 1.2 REFERENCES A. AGA Z21.22 (American Gas Association) - Relief Valves
More informationCONTENTS. Double Flow Measurement Device 1. Fixed Orifice Double Regulating Valve 3. Variable Orifice Double Regulating Valve 7
CONTENTS Double Flow Measurement Device 1 Fixed Orifice Double Regulating Valve 3 Variable Orifice Double Regulating Valve 7 Flow Measurement Graphs for Fixed Orifice Devices 9 for Variable Orifice Devices
More informationKnife gate valves Index
Index General information page Introduction 144 Product information page ast Iron/SS; Uni-directional 146 ast Iron/SS; i-directional; Throught conduit 147 ast Iron/SS; i-directional 148 ast Iron/SS; Silo
More informationKO Series. Cast Steel Gate Valves
FEATURES & BENEFITS Body and bonnet of Class 150 - Class 900 gate valves are usually connected with studs and nuts. The body and bonnet of Class 1500 - Class 2500 gate valves are usually a pressure sealed
More informationGATE VALVES. Type P (Standard: Plug) Type S (Soft Seal) Contents. (1) Be sure to read the following warranty clauses of our product 1
Serial No. H-V011-E-12 GATE VALVES Type P (Standard: Plug) Type S (Soft Seal) Contents (1) Be sure to read the following warranty clauses of our product 1 User s Manual (2) General operating instructions
More informationCLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
More informationTechnical Data TYPE A SERIES AIR ADJUSTED PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4011 OPERATING PRINCIPLE
Technical Data SD 4011 SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE A SERIES AIR ADJUSTED PILOT PRINTED IN U.S.A. SD 4011/9504 Type A or A83 (wt 6 lb) Type A53 or A 85
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationUnion County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 220523 - GENERAL-DUTY VALVES FOR PLUMBING PIPING PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Brass ball valves. 2. Iron swing check valves. 3. Iron gate valves. 4. Iron globe valves. B.
More informationPREVIEW COPY. Table of Contents. Lesson One Valve Maintenance...3. Actuators and Accessories Lesson Four Valve Selection...
Table of Contents Lesson One Valve Maintenance...3 Lesson Two Lesson Three Special Valves...19 Actuators and Accessories...35 Lesson Four Valve Selection...51 Lesson Five Piping System Protection...67
More informationHerpteraium SECTION VALVES GENERAL
SECTION 22 05 23 VALVES GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0217 Effective: February 1, 2017 Revised: 12/07/17 Suggested list prices are subject to change without notification. Visit our Website for the
More informationHattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
More informationEC4 SERIES CRYOGENIC VALVES 1/4 2 Sizes
12501 Telecom Drive, Tampa, FL 33637 Ph: (813) 978-1000 Fax: (813) 977-3329 www.cpc-cryolab.com INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 17/2.5.6 Rev. 0 EC4 SERIES CRYOGENIC VALVES 1/4 2 Sizes
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IND-0718 Effective: July 2, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0318 Effective: March 1, 2018 Revised: 08/06/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List IND-0718 Effective: July 2, 2018 Revised: 09/24/2018 Suggested list prices are subject to change without notification. Visit our Website for the most up-to-date product
More informationBronze Y Type Strainers
SETION 9a Bronze Y Type Strainers Tel: + ()95 7 Fax: + ()95 72 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents and Numerical Index Bronze Y Strainers ontents Page Figure Number
More informationStainless Steel / Iron Valve ISO 9001
CAST IRON GATE VALVE CLASS 125 NON-RISING STEM. (N.R.S.) STEM: SS410 (BRASS / SS304) MODEL: CI-12N (CI-12N/CI-2NS) CAST IRON GATE VALVE CLASS 125 OUTSIDE SCREW AND YOKE. STEM: SS410 (BRASS / SS304) MODEL:
More informationINSTALLATION AND MAINTENANCE INSTRUCTIONS For Chemline EC & EK Series Characterized Control Valves Sizes 1/2 6
INSTALLATION AND MAINTENANCE INSTRUCTIONS For Chemline EC & EK Series Characterized Control Valves Sizes 1/2 6 Installation (all sizes) 1. Before installation, check the stainless steel reinforcing rods
More informationHIGH PRESSURE CONTROL VALVE PISTON BALANCED
PISTON BALANCED All Rights Reserved. All contents of this publication including illustrations are believed to be reliable. And while efforts have been made to ensure their accuracy, they are not to be
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
PART 1 - GENERAL 1.1 DESCRIPTION OF WORK A. Provide labor, materials, equipment, and services necessary to install valves required to complete the work indicated on drawings. B. ASME Compliance: 1. ASME
More informationDivision 23 - HVAC Section Switzerland Beallsville K-12 GENERAL DUTY VALVES FOR HVAC PIPING
SECTION 23 05 23 GENERAL-DUTY VALVES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the Contract, including General and Supplementary Conditions and Division
More informationIndustrial Bronze and Iron Price List
Industrial Bronze and Iron Price List TABLE OF CONTENTS IBI-1017 Effective: October 2, 2017 Revised: 12/07/2017 Suggested list prices are subject to change without notification. Visit our Website for the
More informationMAINTENANCE GUIDELINES FOR NIBCO ¼ THROUGH 3 CLASS 125, 150, 200 & 300 BRONZE SWING CHECK VALVES FIGURE NUMBERS
MAINTENANCE GUIDELINES FOR NIBCO ¼ THROUGH 3 CLASS 125, 150, 200 & 300 BRONZE SWING CHECK VALVES FIGURE NUMBERS T-413-B, Y, W S-413, B, Y, W T-433, B, Y, W S-433-B, Y T-453-B, Y T-473-B, Y S-473-B, Y T-473-B,
More information15100 VALVES. E. Section Building Automation and Control System Guidelines
15100 VALVES PART 1: GENERAL 1.01 RELATED SECTIONS A. Section 15050 Basic Material and Methods B. Section 15545 Chilled Water System C. Section 15550 Heat Generation D. Section 15790 Coils E. Section 15955
More informationSECTION GENERAL-DUTY VALVES FOR PLUMBING PIPING
SUNY GENESEO 220523-1 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationMAINTENANCE MANUAL. Covering Models: Series (1/4-10 ) S Series (1/4-1 ) Series (3-10 )
BFMM4000 1-09 MAINTENANCE MANUAL Covering Models: 40-200 Series (1/4-10 ) 40-200S Series (1/4-1 ) 40-700 Series (3-10 ) REDUCED PRESSURE PRINCIPLE (RPZ) BACKFLOW PREVENTERS 1/4" - 10" AND REDUCED PRESSURE
More informationBall Valve. Ball Valve
1-pc reuce bore f / f threa, ISO 228-1G nominal pressure 8 (1/4 ) - 80 (3 ) = PN 63 PTE seats an seals IN 8 1/4" 5.0 39.0 71.0 33.0 0.33 VB15651855 10 3/8" 7.0 44.0 93.0 35.0 0.33 VB15652180 15 1/2" 9.2
More informationI N F L O W S Y S T E M S VALVULA DE RETENCIÓN
PROUC TOS Y SOUCIONES EN REES E FUIOS PROUCTS AN SOUTIONS I N F O W S Y S T E M S VAVUA E RETENCIÓN CHECK VAVE Index 0 0 0 0 07 08 09 0 7 8 0 Features of ual Plate R wafer dual plate check valve R0 class
More information3-Way Ball Valve Type 23H
Serial No. H-V062-E-4 contents 3-Way Ball Valve Type 23H User s Manual (1) Be sure to read following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instruction for transportation,
More information2001 SERIES CRYOGENIC BAR STOCK BODY VALVES
12501 Telecom Drive, Tampa, FL 33637 Ph: (813) 978-1000 Fax: (813) 977-3329 www.cpc-cryolab.com INSTALLATION, OPERATING, AND MAINTENANCE INSTRUCTIONS 17/4.5.2 Rev. 0 2001 SERIES CRYOGENIC BAR STOCK BODY
More informationOPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
More informationInstructions for Installation, Operation, Care and Maintenance
Model D Dry Pipe Valve Bulletin 350 Rev. S Bulletin 350 Rev. S Instructions for Installation, Operation, Care and Maintenance 4 (100mm) 6 (150mm) Valve With Model D Trimmings Listed by Underwriters Laboratories,
More informationStandard Product Range
Standard Product Range Standard Pressure onnection Nominal size inch Product code mm ASME 150/200 psi Wafer Lugged 1 150/200 DJ 1 150/200 DJL Standard Product Range EN PN10 PN16 PN25 Wafer Lugged Wafer
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule June 1, 2015 Supersedes BIV-06-11 CLASS 125 07 Brass, Bronze, Iron and Stainless Steel Valves ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC 125 WSP/200 WOG BRONZE
More informationBrass, Bronze, Iron and Stainless Steel Valves
Price Schedule January 1, 2018 Supersedes BIV-06-15 Brass, Bronze, Iron and Stainless Steel Valves 07 BRONZE GATE VALVES CLASS 125 ASTM B283 FORGED BRASS SCREW-IN BONNET NON-RISING STEM SOLID WEDGE DISC
More informationCV Control Valves Installation and Operation Manual
CV1500 - Control Valves Installation and Operation Manual 652-EN Overview Warning: This bulletin should be used by experienced personnel as a guide to the installation of the Armstrong CV1500 Control Valve.
More information1.2 REFERENCES.1 American National Standards Institute (ANSI)/ American Society of Mechanical Engineers (ASME)
Issued 2005/06/01 Section 15111 Valves Bronze Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National Standards Institute (ANSI)/
More informationINSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS
INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationInstallation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 377 Float Cage / 326L & 322L lever Valves TABLE OF CONTENTS Overview... Cover General Information... Cover Operation... 4 Installation...4-6 Maintenance...
More informationNEECO INDUSTRIES INC. INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY
INSTRUCTION MANUAL 7 1/16 10K SLAB GATE BODY INTRODUCTION The NF-700 type gate valves provided by Neeco Industries are full-bore through conduit non-rising stem manually (w/ball screw) operated valves.
More informationVacuum Breakers. Brass Construction 3/4 MHT Outlet
Vacuum Breakers Brass Construction 3/4 MHT Outlet MASTER ITEM # DESCRIPTION INNER CAR- TON QTY CARTON QTY HPVVBRB 3/4 FHT x 3/4 MHT Rough Brass 20 200 HPVVBCP 3/4 FHT x 3/4 MHT Chrome Plated 20 200 1 Body
More informationInstructions for Installation, Operation Care and Maintenance
Model A Dry Pipe Valve Bulletin 353 Rev.K Bulletin 353 Rev.K Instructions for Installation, Operation Care and Maintenance 2 1 2 (65mm) Valve With Model A Trim Listed by Underwriters Laboratories, Inc.
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationAVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12"
AMERICAN AVK COMPANY AVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12" TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
More informationIMOI 2010 Rev 0
FOREWORD The following instructions are offered as a reference aid to the valve user when installing, maintaining or operating Williams Gate, Globe and Swing Check valves. This document, consisting of
More informationSECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION. A. Pipe, fittings, valves, and connections for sprinkler systems.
SECTION 210500 - COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, valves, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS A. Section 099000
More informationMODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions
MODEL 106/206-PG POWER OPERATED GLOBE VALVE Sizes 1/2" to 8" (106-PG) 3" to 10" (206-PG) Installation, Operating and Maintenance Instructions DESCRIPTION: This valve is the basic component used for most
More informationCylinder and Valve: AirHawk II Air Mask
Cylinder and Valve: AirHawk II Air Mask MAINTENANCE AND REPAIR MSA 011 (L) Rev. 0 MSA 2010 Prnt. Spec. 10000005389(I) Mat. 10104218 Doc. 10104218 Parts List Cylinder Replacement Kits Item P/N Description
More informationPressed for time? JUST PRESS, CRIMP AND SAVE.
Pressed for time? JUST PRESS, CRIMP AND SAVE. Productivity Statistics are derived from MCAA s WebLEM (Web-Based Labor Estimating Manual). Estimates were based on installing comparable 1" two-piece ball
More informationGLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC.
GLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC. Gate - API 603 Globe - API 603 Sizes 1/2-12 Class Figure # 150 GVP 1716 300 GVP 1736 Class Graphite Fig. # 150 GVP 1716
More informationGLOBE VALVE APPLICATION
SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,
More informationAVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING
AVK TOTAL CONTROL INSIDE BUILDINGS GENERAL VALVES FOR BUILDING SERVICE MEMBER OF THE GROUP GATE VALVE RESILIENT SEATED FULLY VULCANIZED WEDGE Product series: S02, S21, S06, S15, S55 Rising stem/non rising
More informationCUSTOM COMBINATION AIR VALVE
INSTALLATION / OPERATION / MAINTENANCE CUSTOM COMBINATION AIR VALVE INTRODUCTION This manual will provide you with the information to properly install and maintain this valve to ensure a long service life.
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR PLUMBING PIPING Page
Page 220523-1 SECTION 220523 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationHand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 )
Hand Expansion Valves Built Stronger to Last Longer Sizes: 6mm (¼ ) to 305mm (4 ) Bulletin No. 82-00A Suitable For: Ammonia, Fluorocarbons, Nitrogen and Carbon Dioxide Features ASTM 352 LCB Cast Steel
More informationBrown University Revised August 3, 2012 Facilities Design & Construction Standards SECTION HVAC&R VALVES
SECTION 23 05 23 HVAC&R VALVES PART 1 - GENERAL 1.1 SUMMARY: A. Section includes valves for building services piping. 1.2 GENERAL VALVE APPLICATION REQUIREMENTS: A. Provide valve handle extensions that
More informationKLINGER Piston Valves KVN DN PN 16 I/III with valve ring KX-GT Modul
Page 1 Assembly Instructions and Handling Regulations for KLINGER Piston Valves KVN DN 65 150 PN 16 I/III with valve ring KX-GT Modul DN 125-150 1 Body 2 Bonnet 3 Hand wheel 4 Piston 5 Lantern bush 8 Threaded
More informationAir Release Valve (PDCPD) Air Release Valve for Water (PDCPD + Epoxy Resin Coating) User s manual. Air Release Valve. Air Release Valve for Water
Serial No. H-V035-E-3 Air Release Valve (PDCPD) Air Release Valve for Water (PDCPD + Epoxy Resin Coating) Contents (page) User s manual () Be sure to read the following warranty clauses of our product
More informationStem Assembly Supplement
Installation, Operating & Maintenance Instructions Assembly Supplement Envirosafe Cryogenic & Low Temperature O-Ring as FM 00707 Cryogenic & Low Temperature Valves: This section contains only details of
More informationWellhead Valves. DHV Industries,Inc. DHV Valve Company Inc.
DHV Industries,Inc. 3451 Pegasus Drive, Bakersfield. CA 93308 U.S.A. Call TollFree: (887) DHV-USA1 Phone: (661) 392-8948 Fax: (661) 392-8947 E-mail: sales@dhvindustries.com Website: www.dhvindustries.com
More informationDIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION HVAC VALVES
DIVISION 23 HEATING, VENTILATING, AND AIR CONDITIONING (HVAC) SECTION 23 05 23 PART 1 GENERAL 1.01 DESCRIPTION A. Provide valves for the following systems: 1. Heating Hot Water 2. Chilled Water 3. Condenser
More informationTechnical Data TYPE T124 & T134 TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4512A
WATTS INDUSTRIES, INC. Technical Data SD 4512A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 PRINTED IN U.S.A. SD 4512A/9806 T124/T134 PILOT FRONT VIEW 2 1 /16 F 5 7 /8 2 3
More informationMichigan State University Construction Standards. GENERAL-DUTY VALVES FOR HVAC PIPING Page
Page 230523-1 Copyright 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical Plant
More informationSECTION (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING
SECTION 22 05 23 (15110) - GENERAL DUTY VALVES FOR PLUMBING PIPING PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Valves. B. Related Sections: 1.02 REFERENCES 1. Section 22 05 53 (15075) Identification
More informationCAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES.
CAST STEEL FLANGED GATE, GLOBE, & CHECK VALVES www.fnw.com Index Options & Accessories... 2 Standards... 2 Figure Number Matrix... 3 Pressure/Temperature Ratings... 3 Hydrostatic Test Pressures... 3 Carbon
More informationAVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12"
AMERICAN AVK COMPANY AVK SERIES 41 SWING CHECK VALVE FIELD MAINTENANCE AND INSTRUCTION MANUAL FOR SWING CHECK VALVES 3" - 12" TABLE OF CONTENTS EXPLODED ASSEMBLY / PARTS LIST INTRODUCTION / DESCRIPTION
More informationSECTION GENERAL-DUTY VALVES FOR HVAC PIPING. A. Contents of Division 23, HVAC and Division 01, General Requirements apply to this Section.
SECTION 23 05 23 PART 1 - GENERAL 1.1 SUMMARY A. Work Included: 1. Gate Valves 2. Balancing Valves 3. Ball Valves 4. Butterfly Valves 5. Swing Check Valves 1.2 RELATED SECTIONS A. Contents of Division
More informationA. American National Standards Institute: 1. ANSI Z Relief Valves for Hot Water Supply Systems.
SECTION 220523 - PLUMBING VALVES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball valves. 2. Butterfly valves. 3. Swing check valves. 4. Spring loaded check valves. 5. Water pressure reducing
More informationSECTION VALVES. A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section.
PART 1 GENERAL 1.01 DESCRIPTION OF WORK SECTION 22412 VALVES A. Extent of Valve Work is indicated on the Drawings and by the Requirements of this Section. B. All valves, except those are 2 in diameter
More informationPROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA
The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending
More informationDN15 DN250 PN 16. Corrosion Protection
PRODUCTION STANDARTS DN15 DN250 PN 16 Design DIN 3357 Connection EN 1092-2 / ISO 7005-2 Face to Face DN15-DN150: EN558 Series 14 / DIN 3202 F4 DN200-DN250: EN558 Series 27 / DIN 3202 F5 Marking EN 19 Tests
More information#8 VENT VALVE with BRANCH PIPE TEE, Part No
#8 VENT VALVE with BRANCH PIPE TEE, Part No. 579076 JANUARY, 001 Supersedes Issue dated November, 1988 NOTE: The following description and operation is based on this device and its components being new
More informationJ Flow Controls Model Numbering
4665 Interstate Dr Cincinnati, OH 45246 Phone 513-731-2900 Fax 513-731-6939 3500 Series Valve Instruction and Maintenance Manual Caution: Prior to performing any repairs or maintenance on the valve assembly,
More informationSwing Check Valve ASAHI AV VALVES. Contents. User s Manual. (1) Be sure to read the following warranty clauses of our product 1
Serial No. H-V013-E-13 Swing Check Valve User s Manual Contents (1) Be sure to read the following warranty clauses of our product 1 (2) General operating instructions 2 (3) General instructions for transportation,
More informationModel DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation
Deluge Valve DV-5 Model DV-5 Deluge Valve, Diaphragm Style, 1-1/2 thru 8 Inch (DN40 thru DN200), Deluge System Electric Actuation GeneralDescription The Model DV-5 Deluge Valve (described in Technical
More informationTABLE OF CONTENTS IND0610 EFFECTIVE SUPERCEDES 1109 BRONZE GATE VALVES PAGE 1 BRONZE GLOBE/ANGLE VALVES PAGE 2 SIMILARITY CHART-PART 2 PAGE 12
TABLE OF CONTENTS IND0610 EFFECTIVE 060110SUPERCEDES 1109 BRONZE GATE VALVES PAGE 1 BRONZE GLOBE/ANGLE VALVES PAGE 2 BRONZE CHECK VALVES CAST IRON VALVES-"A" SERIES CHAINWHEELS, SQUARE OP NUTS CAST IRON
More informationM-5000/5700 Instant Hot Water Maker
M-5000/5700 Instant Hot Water Maker Operations Manual for Strahman M-5000/5700 Unit, M-70 Spray Nozzle and Soft Seal Piston Valve Last Updated: July 1, 2009 Strahman Valves, Inc. USA Headquarters 2801
More informationV A L V E S. rice List of. Controlling fluids is our expertise TERMS & CONDITIONS : An ISO:9001 Co. PRICE LIST NO. : JMW / 3 0 W.E.
V A L V E S Controlling fluids is our expertise TERMS & CONDITIONS : This cancels our all previous issues. All prices are Ex. works, Jalandhar. Excise duty will be charged extra as applicable (presently
More informationPRESSURE REDUCING CONTROL VALVE
PRESSURE REDUCING CONTROL VALVE 06/08 Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Reducing setpoint is adjustable 2 (AOS) X P/L Standard Components 1 Main
More informationValves. Valves Range 1340 Double Check Valves PN16. Material Specification
Valves Range 1340 Double Check Valves PN16 Material Specification 1340-1/2" - 2" No Component Material Specification 1 Body DZR Brass BS EN 12164 CW602N 2 Check Spool Acetal Acetal 3 Retaining Ring Nylon
More informationCentral Brass REPLACEMENT PARTS. MODEL NOS Three-Valve Bath & Shower Fitting Direct Sweat 8-inch Centers
1 REPLACEMENT PARTS A 3 2 5 4 6 5 3 4 6 11 D C B 9 8 10 9 7 E 8 10 9 7 C These items are not offered individually and must be purchased as a group or unit. Please contact Central Brass for more information.
More information