Talon 10 & 12 Models

Transcription

1 Talon 10 & 12 Models Normally we request new models to be returned to the factory during the first year of production. Our Quality Assurance and Engineering teams gain information by seeing these products back prior to having them serviced in the field. In the event of a simple repair on the new Talon models such as a spike, control board, motor, or motor cover replacement please perform the field repair. If complete tear down of the new Talon is required then we would like it back so our team can see the failure first-hand during this first summer. We will add a chapter to the repair manual for Talon 10 and 12 models in the future. Approved Authorized Service Provider field repairs for 2014: Motor Assembly Kit Power Cord Kit Mounting Bracket Strap Assembly Control Board Kit Individual cowling cover components / Spike replacement kits Wiper Assembly Kit

2 Talon - 10' & 12' Shallow Water Anchor PARTS LIST 2-year warranty on electrical parts 5-year warranty on mechanical parts lifetime spike warranty Reference chart on page minnkotamotors.com 2013 Johnson Outdoors Marine Electronics, Inc.

3 ITEM NUMBER QUANTITY PART NUMBER(S) PART NAME SCOTCHLOK CONNECTOR CLAMP CABLE, 3/16" /16-18 NYLOCK, SS BUSHING-HAT 1/2" SHAFT BRONZE #8-18 X 1 SS PPH SCREW, 1/4-20 X 3/4 FLAT SCREW, #8-32 X 5/8 PPMS SS SHRINK TUBE,.374 ID X 1.0" C-CLIP, 3/8 LOW CLEARANCE SS WRAP DRUM SPACER /16" FLAT WASHER, SS WASHER, 5/16 FENDER #8 WASHER, 1/2 OD, SS /8 HD FLAT WASHER, SS PULLEY SPACER, SHORT CONTROL BOARD SPACER, T SPACER, #8 X.125" SENSOR BRACKET, TALON WATER GUARD, MAIN TALON WRAP DRUM MOUNT, TALON TENSIONER BLOCK PIN, PULLEY LONG, TALON BOTTOM PULLEY PIN, T TENSIONER-PULLEY-PIN SPRING, GIB TENSION SPRING, PISTON SPRING, TORSION - WRAP DRUM, TALON SLIDE GIB, LOWER SLIDE GIB, FLOATING CORD RETAINER E-RING EXTERNAL SS NUT #4-40 NYLOK, SS /8-24 MYLOK NUT, SS TENSIONER STOP SCREW #4 X 5/8 PPMS SS SCREW #10-32 X 1/2 SEMS PPH SS #6-32 X 1/4" TYPE F PPH SS /16-18 X 3-1/2 HHCS SS /8-16 X 1" HHCS SS TALON MOUNTING TRAP, T TALON STOP BOLT EXTRUSION TALON 2, MOTOR STRAP PCB-ASM, TALON DECAL, MINNKOTA FRONT, TALON DECAL, COVER-BEZEL- 12' BLACK DECAL, COVER-BEZEL- 10' BLACK DECAL, COVER-BEZEL - 12' WHITE DECAL, COVER-BEZEL - 10' WHITE DECAL, LARGE TALON LOGO BEARING, WRAP DRUM SEALED MOTOR, TALON HUB, WRAP DRUM, ALUMINUM OUTER COLOR EXTRUSION - 10' CLEAR OUTER COLOR EXTRUSION - 10' BLACK OUTER COLOR EXTRUSION - 10' BLUE OUTER COLOR EXTRUSION - 10' RED OUTER COLOR EXTRUSION - 12' CLEAR OUTER COLOR EXTRUSION - 12' BLACK OUTER COLOR EXTRUSION - 12' BLUE OUTER COLOR EXTRUSION - 12' RED 2013 Johnson Outdoors Marine Electronics, Inc. minnkotamotors.com 21

4 ITEM NUMBER QUANTITY PART NUMBER(S) PART NAME TILT BRACKET, MACHINED, TALON RESETTABLE FUSE - 30A X.125 MAGNET POWER CORD, 14AWG, 3 CONDUCTOR POP RIVET, 1/8" SS WATER SHIELD, DEFLECTOR TALON WIRE LOOM 3/8" #8-32 X 1-1/4" PPH MACHINE SS #8-16 X 1/2" PLASTITE SCREW SS SCREW, 1/4-20 X 2.75" PPH SS /8-24 X.75" HHCS SS SCREW #8-16 X 1.5 PLASTITE SS SCREW #8-32 X 1.0 PPH SS /8-24 X 1.25 HHCS SS SCREW, #8 X.437 SS HI-LO SCREW #4-40 X 5/16 SHCS SS FUSE CAP W DECAL PULLEY W BUSHING, LARGE IDLER WRAP DRUM, MODULAR ASM TALON WASHER 3/8 SS PIN, DRIVESHAFT TIE WRAP, 4" COVER FW TALON 2, BLACK COVER SW TALON 2, WHITE HOUSING LEFT, TALON 2 BLACK HOUSING LEFT, TALON 2 WHITE HOUSING RIGHT, TALON 2 BLACK HOUSING RIGHT, TALON 2 WHITE BEZEL HOUSING, TALON 2 BLACK BEZEL HOUSING, TALON 2 WHITE 22 minnkotamotors.com 2013 Johnson Outdoors Marine Electronics, Inc.

5 Reference chart on page Johnson Outdoors Marine Electronics, Inc. minnkotamotors.com 23

6 ITEM NUMBER QUANTITY PART NUMBER(S) PART NAME NUT, NYLOK 18-8 SS C-CLIP, 3/8 LOW CLEARANCE SS CABLE-KEEPER WIPER, RETAINER SPIKE,.75 X 48.3", 10' SPIKE,.75" x 56.4", 8/12' SHAFT, IDLER PIN, SPRING 1/8 X 1.0 SS PIN-DOWEL 3/16" X 1.5 SS TALON PIN KNURLED 1/8" PIN, SPRING 1/8 X 1-1/4 SS PIN DOWEL 3/16 X 2.5 SS TALON RD STAGE SUPPORT PIN RD STAGE SUPPORT DOWEL SPRING, GIB TENSION SPRING, PISTON SPRING,.36 X SPRING-LATCH-3RD SLIDE GIB, LOWER SLIDE GIB, UPPER SLIDE GIB, FLOATING SCREW, #10-24 X.500 MACHINE SHOULDER SCREW, 1/4 X 5/16 SS WIPER, 2ND STAGE O-RING, 3/4" ID X INSULATOR, 1/4" STOP PIN ND STAGE INSULATOR, 1/4" STOP PIN TALON SHIELD-DEBRIS, 2ND STAGE DEBRIS-SHIELD-2ND STAGE WIPER RD STAGE LATCH LATCH SECOND STAGE CLIP-3RD STAGE CABLE ASSY, 2 MM, EXTEND 12' CABLE ASSY, 2MM, EXTEND 10' CABLE ASSY, 2 MM RETRACT 10/ RD STAGE, MACHINED 10/ ND STAGE, MACHINED 10/ POP RIVET, 1/8" SS ISOLATOR, SPIKE DEBRIS-CHANNEL SCREW, #8 X.437 SS HI-LO SETSCREW M4-.07 X.70" SS SHCS 4-40 X 5/16 SS PISTON W/ MAGNETS ASM SM IDLER PULLEY W BUSHING 24 minnkotamotors.com 2013 Johnson Outdoors Marine Electronics, Inc.

7 GREEN IGNITION WIRE YELLOW ELEC BRAKE (FROM MOTOR) TO WHITE ELEC BRAKE (FROM CONTROL BOARD) NON-POLARITY SENSITIVE POWER CORD LEADS 1 1 IN. SHEET OF SIZE PART NO. D C B A RED (+) MOTOR BLACK (-) MOTOR 2 LIFT MOTOR MAIN CONTROL BOARD 1 LED SENSOR (MOUNTS TO WRAP DRUM BRACKET) WHITE (+) POWER WIRE RETRACTION SENSOR (MOUNTS AT TOP OF TALON ASM) BLACK (-) POWER WIRE A RELEASE FOR PRODUCTION GPB REV. ECN NO. DESCRIPTION BY DATE TOLERANCES: UNLESS OTHERWISE SPECIFIED CONFIDENTIAL PROPERTY-This document is the confidential property.xxxx #.0010.X #.015 of Johnson Outdoors and is loaned subject to return upon demand; title.xxx #.005 FRACTIONAL #1/64 to same is never sold/transferred for any reason. This document is to be used only pursuant to written instructions of Johnson Outdoors. THIRD.XX #.010 ANGULAR #0$30' All rights to designs and inventions are reserved by Johnson Outdoors. ANGLE PROJECTION JOHNSON OUTDOORS MARINE ELECTRONICS, INC. DRAWN BY: DATE: PART NO.: SCALE: B Possession of this document is accepted subject to the foregoing. MATERIAL: REV.: RoHS2 AND REACH COMPLIANCE: U/M: Supplier certifies that this part complies with 2011/65/EU (EU RoHS2) and (EC) QUALITY REQUIREMENTS: STATUS: Concept No 1907/2006 (EU REACH). Upon request, supplier will furnish verification of compliance Circled dimensions are critical. Dimensions marked LIFECYCLE * via: JOI form; supplier declaration or analytical testing referencing JOI part number. require Proof of Quality with each shipment. D C B A 0.3:1 PART NAME: WIRING DIAGRAM - TALON