O-540-B, -E AND -G SERIES PARTS CATALOG STANDARD CYLINDER FLANGE CRANKCASE MODEL ENGINES

Size: px

Start display at page:

Download "O-540-B, -E AND -G SERIES PARTS CATALOG STANDARD CYLINDER FLANGE CRANKCASE MODEL ENGINES"

Howard Moore
6 years ago
Views:

4 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS INTRODUTION This illustrated parts catalog contains a complete parts listing for the ycoming O-0-, - and - Series standard cylinder flange crankcase model aircraft engines. Major assembly and sub-assembly parts of the engines are listed in the roup ssembly sections in the general sequence of engine build up. Service Kits section and Oversize and Undersize Parts ist are included to aid in ordering parts as necessary during overhaul. The Numerical Index is provided for convenience in finding parts when only the part number is known. Parts coverage of Vendor ccessories used on ycoming engines may be found in the appropriate Vendor s Parts atalog. list of addresses of where to obtain these publications appears in the latest revision of Service etter No.. NOT The illustrations, pictures and drawings shown in this publication are typical of the subject matter they portray. This catalog, when used in conjunction with the appropriate overhaul manual, shall be used for parts identification only. Under no circumstances shall this catalog be used as an assembly or installation document. ny reference in this document to a suppliers/parts manufacturers product, by name, trademark, part number or other description is solely for the purposes of identification and does not indicate or infer that ycoming accepts responsibility for quality control and/or airworthiness of parts which do not pass through the ycoming quality control system. ll ycoming Williamsport Plant publications will bear the copyright notice 99 by ycoming ll Rights Reserved, and all ycoming publications are to be considered copyrighted and may not be reproduced without permission of the company. SRVI UTINS, INSTRUTIONS ND TTRS lthough the information contained in this parts catalog is up-to-date at time of publication, users are advised to procure current information through all ycoming distributors or from the factory by subscription. onsult the latest revision of Service etter No. for subscription information. HOW TO ORDR PRTS In ordering parts for your engine, observe the following instructions which will expedite shipment of correct parts required without delay. a. lways specify the model and serial number of your engine. b. lways specify Part Number, Nomenclature and quantity required. ycoming ngines, a division of VO orporation, a wholly owned subsidiary of Textron Inc. P-- i

5 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS T OF ONTNTS STION P Introduction...i Table of ontents...ii Oversize and Undersize Parts isting...iii. RNKS, RNKSHFT ND MSHFT ROUP rankcase ssembly...- Oil evel ages and ngine Mounting rackets...-3 rankcase Related Parts...- rankshaft and Related Parts...-7 amshaft and Related Parts...-9 Propeller overnor Drive ssembly...-0 rankshaft Idler ears...- rankcase ttaching Parts SSORY HOUSIN ND RTD PRTS ccessory Housing ssembly...- Oil Pump ssembly and ccessory Housing ttaching Parts...- Fuel Pump ssembly, over and ttachments...-3 Oil Pressure Screen, Oil Filter and Oil ooler ypass Valve...- Vacuum Pump Drive, Oil ooler and reather Fittings...-6 Hydraulic Pump Drive, over and ttachments YINDR, PISTON ND VV TRIN onnecting Rods, Pistons and Ring ssemblies...3- ylinder ssembly Valve ssembly and Related Parts...3- ylinder Related Parts ylinder Head Drain Tubes, Intercylinder ooling affles and Related Parts INITION SYSTM endix Magnetos and Magneto Drives...- Ignition Harnesses and ttachments for endix Magnetos...-3 Slick Magnetos, Harnesses, Drives and Spark Plugs...- ag Magneto Harness ttaching...-7 ag Magneto Harness ttaching TRI OMPONNTS Prestolite Starters and ttaching Parts...- ycoming ight Weight Starter and ttaching Parts...- lternator ssemblies and elts...-3 lternator Mounting and ttaching Parts...- lternator Mounting and ttaching Parts...-7 enerator Mounting and ttaching Parts OI SUMP ND INDUTION SYSTM Oil Sump ssembly and ttachments...6- Intake Pipes and ttachments Priming System SRVI KIT STION NUMRI INDX...8- ii P--

6 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS OVRSIZ ND UNDRSIZ PRTS ISTIN OVRSIZ UNDRSIZ PRT NO. DSRIPTION P0.00 P0.00 P0.00 P.0 P0.00 P P0.00 P0.00 M M M UID S TST RVISION OF SRVI INSTRUTION NO. 6 FOR PPITION USHIN X X INSRT X DOW X 7903-,- USHIN S TST RVISION OF SRVI INSTRUTION NO. 3 FOR PPITION. 707 ST X X X 708 ST X X X 7060-S USHIN X X X X 706-S USHIN X X X X 706-S USHIN X X X X 7-S USHIN X X X X 7380 USHIN S TST RVISION OF SRVI INSTRUTION NO. FOR PPITION. 730 UID S TST RVISION OF SRVI INSTRUTION NO. 6 FOR PPITION. 730 DOW X 766-S USHIN X X X X 767-S USHIN X X X 783 S S TST RVISION OF SRVI INSTRUTION NO. 3 FOR PPITION. W-067 DW X X W-0 RIN X X X X W-7 RIN X X X X W-997 S S TST RVISION OF SRVI INSTRUTION NO. 3 FOR PPITION. W-3 RIN X X* X* X* W-3 RIN X X X W-379 S S TST RVISION OF SRVI INSTRUTION NO. 3 FOR PPITION. W-388 RIN X X X X W-388 RIN X X X W-68 S S TST RVISION OF SRVI INSTRUTION NO. 3 FOR PPITION. W-607 RIN X X X X W-608 RIN X X* X* X* STD-06 DOW X X X X RIN X X X X 89 RIN X X X X 8D939 RIN X X X X RIN X X X X * - lso available in P0 oversize. In addition to the above, studs are available in P0, P0, P03, P0, P07, P0 & P. NOT When ordering oversize and undersize parts, be sure to specify the required oversize and undersize dimension along with the proper part number. For example, to order bearing W-388 in.003 undersize, order part number W-388-M3. Oversize code letter is P while undersize code letter is M. These letters are then followed by the number designating the size in thousandths of an inch. P-- iii

7 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. PRT NUMR RNKS, RNKSHFT ND MSHFT ROUP RNKS SSMY DSRIPTION O N QUNTITY PR SSMY W-033 RNKS SSMY (See Note) W-96 RNKS SSMY (See Note) STD-7 DOW, / dia. x /6 long, hollow DOW, rankcase thru stud 6673 STUD, /-3 x 9-7/8 long 0- STUD, /-3 x -7/8 long STUD, /6-8 x 0-/3 long STUD, 3/8-6 x -/8 long 8 0 PU, /8 pipe x 3/8 long, socket RTINR, Shroud tube seal STUD, 3/8-6 x -7/8 long STUD, 3/8-6 x -3/ long STD-339 PU, /6-7 pipe, llen head 3 3- STUD, /6-8 Nat l. Form x -/ long 3-3 STUD, /6-8 Nat l. Form x -/8 long DOW, rankshaft bearing 6 W-067 DOW, rankshaft bearing 6 7 STD- DOW, /6 diameter x / long 8 3-6* STUD, /6-8 x.00 long, driven height (.7-.3) 3-* STUD, /6-8 x -3/ long, driven height ( ) 9 STD-339 PU, /6-7 NPT, llen head (piston squirt holes) 6 6 * - heck crankcase for height of studs required. NOT This part is not available as a service item. Refer to Service Kit Section 7 for applicable rankcase ssembly and governor stud kit part number. P-- -

8 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. RNKS SSMY - P--

9 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS RNKS, RNKSHFT ND MSHFT ROUP OI V S ND NIN MOUNTIN RKTS FI. RF. PRT NUMR DSRIPTION 707 SKT, Oil filler extension O N QUNTITY PR SSMY 776 XTNSION, Oil filler, long (-/ in.) XTNSION, Oil filler, long (6-/6 in.) XTNSION, Oil filler, short (-/6 in.) 777 XTNSION, Oil filler, short (-3/6 in.) 733 XTNSION, Oil filler, short (-3/6 in.) alt. 706 O RIN, Oil level gage 73 RIN, Oil seal,.00 I.D. x /8 section 6 W-779 SSMY, Oil level (threaded plug) W-77 SSMY, Oil level (threaded plug) W-76 SSMY, Oil level (threaded plug) W-73 SSMY, Oil level (cam action) W-73 SSMY, Oil level (cam action) RKT, ngine mounting (Dynafocal) 9770 RKT, ngine mounting (Dynafocal) 8 STD-33 WSHR, 3/8 plain 6 9 STD-678 WSHR, 3/8 lock, internal teeth 6 0 STD-96 NUT, 3/8- plain 6 P-- -3

10 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. OI V S ND NIN MOUNTIN RKTS - P--

11 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS RNKS, RNKSHFT ND MSHFT ROUP RNKS RTD PRTS FI. RF. 3 PRT NUMR DSRIPTION 08-, /6 diameter O N QUNTITY PR SSMY 68668* SPRIN, Oil pressure relief valve W-808* SPRIN, Oil pressure relief valve 7767* SPRIN, Oil pressure relief valve W-73* SPRIN, Oil pressure relief valve 608* SPRIN, Oil pressure relief valve 3 STD- WSHR, No. 0 plain (max. 9) R SKT, -/ I.D. x -/ O.D. x 3/3 annular 769 PU, Oil relief valve 6 8D939 RIN, rankshaft W-607 RIN, rankshaft (alternate) W-0 RIN, rankshaft (alternate) W-7 RIN, rankshaft (alternate) RIN, rankshaft (alternate) W-388 RIN, rankshaft, front 89 RIN, rankshaft, front (alternate) W-388 RIN, rankshaft, front RIN, rankshaft, front (alternate) 8 W-379** S, rankshaft oil, solid W-997** S, rankshaft oil, split W-68** S, rankshaft oil, solid 783** S, rankshaft oil, split S, Oil, 3/3 section x /3 I.D. 707 S, Oil, 3/3 section x /3 I.D RIN, Oil seal, 3/6 I.D. x 7/ ODY, Hydraulic tappet 7890 PUNR SSMY, Hydraulic tappet 3 78 SOKT, Push rod, hydraulic tappet * - Select spring to give a minimum of three threads exposed on adjusting screw to allow field adjustment. Reference latest revision of SSP-776, Part for spring identification. ** - See latest revision of Service Instruction No. 3 for application. P-- -

12 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 3. RNKS RTD PRTS -6 P--

13 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. PRT NUMR RNKS, RNKSHFT ND MSHFT ROUP RNKSHFT ND RTD PRTS DSRIPTION O N QUNTITY PR SSMY 3767 RNKSHFT ND OUNTRWIHT SSY RNKSHFT ND OUNTRWIHT SSY. 3F7779 RNKSHFT ND OUNTRWIHT SSY RNKSHFT ND PU SSMY 3F77 RNKSHFT ND PU SSMY 3 STD- PU,.00 dia. expansion 7380* USHIN, rankshaft dynamic counterweight 760 PU, -3/8 diameter 609 PU, -/ diameter USHIN, Propeller flange, long USHIN, Propeller flange, short USHIN, Propeller flange, indexing USHIN, Propeller flange, long 0 7 USHIN, Propeller flange, short 767 USHIN, Propeller flange, indexing STD-06 DOW, Stepped, /6 x / dia. x 3/6 long 3 W-9** OUNTRWIHT SSMY W-97** OUNTRWIHT SSMY 7903 USHIN, Dynamic counterweight 8 706** ROR, Dynamic counterweight, 6.3 order 7797** ROR, Dynamic counterweight, 6.3 order 6 70** ROR, Dynamic counterweight,. order 796** ROR, Dynamic counterweight,. order 7 W-80 RIN, Internal retaining WSHR, Dynamic counterweight 8 9 3S967 R, rankshaft 0 W-8638 OKPT, rankshaft gear STD-09 OT, /6- x -3/ long, hex. head W-606 SUPPORT SSY., Starter ring gear, / pitch 7779 SUPPORT SSY., Starter ring gear, / pitch 7 SUPPORT SSY., Starter ring gear, / pitch 7030 SUPPORT SSY., Starter ring gear, / pitch R, Starter ring (/ pitch) * See latest revision of Service Instruction No. for application. ** See latest revision of Service Instruction No. 0 for application. See latest revision of Service Instruction No. 3 for application. See latest revision of Service ulletin No. 7 for application. Provision for.9: drive. Provision for 3.: drive for alternators with no prop. de-icing. Provision for.0: drive. Provision for 3.: drive for alternators with prop. de-icing. P-- -7

14 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. RNKSHFT ND RTD PRTS -8 P--

15 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS RNKS, RNKSHFT ND MSHFT ROUP MSHFT ND RTD PRTS FI. RF. PRT NUMR DSRIPTION W-930 MSHFT SSMY O N QUNTITY PR SSMY 768 SPR, Tachometer shaft centering 3 76 SHFT SSMY, Tachometer W-8667 PIN, 3/6 diameter. x -/6 long MS66-08 RIN, Internal retaining FIUR. MSHFT ND RTD PRTS P-- -9

16 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 6 PRT NUMR RNKS, RNKSHFT ND MSHFT ROUP PROPR OVRNOR DRIV SSMY DSRIPTION O N QUNTITY PR SSMY R, Propeller governor driven 7038 SHFT, Propeller governor idler gear R, Propeller governor idler STD-737 KY, 3/3 x /, Woodruff 739 WSHR, Thrust R R R R R R R 730 WSHR, Thrust R R R R R R R 73 WSHR, Thrust R R R R R R R 73 WSHR, Thrust R R R R R R R 6 70 SKT, /3 I.D. x -/8 O.D. x /3 to 3/6 thick 7 W-3896 PU, 3/-6 hex. head SKT, overnor OVR, overnor drive 0 STD-3 WSHR, /6 plain (Woodward governor) STD-3 WSHR, /6 plain (N governor) STD-7 WSHR, /6 lock, internal teeth STD-0 NUT, /6-8 plain PU, Propeller governor idler shaft 708 PU, Propeller governor drive gear FIUR 6. PROPR OVRNOR DRIV SSMY -0 P--

17 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS RNKS, RNKSHFT ND MSHFT ROUP RNKSHFT IDR RS FI. RF. 7 PRT NUMR DSRIPTION 76 R SSMY, rankshaft idler O N QUNTITY PR SSMY 6730 USHIN, rankshaft idler gear R SSMY, rankshaft idler, plain 6730 USHIN, rankshaft idler gear 6 PUNR, Fuel pump, long 6 W-379 SHFT, rankshaft idler gear 7 STD-67 SRW, /6-8 x 7/8 long, hex. head P-- -

18 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 7. RNKSHFT IDR RS - P--

19 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 8 PRT NUMR RNKS, RNKSHFT ND MSHFT ROUP RNKS TTHIN PRTS DSRIPTION O N QUNTITY PR SSMY STRP, ifting STRP, ifting N6-3 OT, 3/8- x 3-37/6 long, hex. head 3 STD-33 WSHR, 3/8 plain 3 STD-678 WSHR, 3/8 lock, internal teeth STD-96 NUT, 3/8- plain 6 W--.0 OT, /-0 x -/ long, hex. head W--.0 OT, /-0 x -/ long, hex. head W--.7 OT, /-0 x -3/ long, hex. head W--.7* OT, /-0 x -3/ long, hex. head 8 STD-8 WSHR, / plain STD-8 WSHR, / plain W--.3 OT, /-0 x -/8 long, hex. head 0 STD-60 WSHR, / lock, internal teeth 6 STD- NUT, /-0 plain W-S.0 OT, /-0 x -/ long, hex. head, dr. end 6 3 STD-8 WSHR, / plain (8 max.) R STD-09 NUT, /-0 slotted shear 6 N6- OT, 3/8- x -3/6 long, hex. head drilled 6 STD-33 WSHR, 3/8 plain 7 STD-87 NUT, 3/8- slotted * ssemble in upper rear crankcase attaching flange hole. P-- -3

20 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 8. RNKS TTHIN PRTS - P--

21 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SSORY HOUSIN ND RTD PRTS SSORY HOUSIN SSMY FI. RF. 9 PRT NUMR DSRIPTION 7388 SKT, ccessory housing 76 HOUSIN SSMY, ccessory 3 3- STUD, /6-8 x -/ long 3D-7 STUD, /6-8 x -/8 long, drilled 3 3- STUD, /6-8 x -/8 long 6 - STUD, /-0 x -/8 long 7 STD-78 PU, 3/8 pipe, llen head 8 0 PU, /8-7 NPT, llen head O N QUNTITY PR SSMY FIUR 9. SSORY HOUSIN SSMY P-- -

22 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SSORY HOUSIN ND RTD PRTS OI PUMP SSMY ND SSORY HOUSIN TTHIN PRTS FI. RF. 0 PRT NUMR DSRIPTION 783 ODY, Oil pump W-80 IMPR SSMY, Oil pump driven 3 76 SHFT, Oil pump drive W-809 IMPR, Oil pump driving STD-3 WSHR, /6 plain 3 6 STD-0 NUT, /6-8 slotted 3 7 W-60 S, Oil, tachometer drive 8 STD-8 WSHR, / plain 0 9 STD-60 WSHR, / lock, internal teeth 0 W--0.9 OT, /-0 x /6 long, hex. head 9 W--.3 OT, /-0 x -/8 long, hex. head W--.88 OT, /-0 x -7/8 long, hex. head O N QUNTITY PR SSMY FIUR 0. OI PUMP SSMY ND SSORY HOUSIN TTHIN PRTS - P--

23 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SSORY HOUSIN ND RTD PRTS FU PUMP SSMY, OVR ND TTHMNTS FI. RF. PRT NUMR DSRIPTION SKT, Fuel pump O N QUNTITY PR SSMY W-7 FU PUMP (67) 3 STD-33 WSHR, 3/8 plain STD-88 SRW, 3/8-6 x -9/3 long, socket hd., dr. head SKT, Pad cover OVR, Pad 7 STD-33 WSHR, 3/8 plain 8 W OT, 3/8-6 x 3/ long, hex. head 9 STD-678 WSHR, ock P-- -3

24 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. FU PUMP SSMY, OVR ND TTHMNTS - P--

25 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. SSORY HOUSIN ND RTD PRTS OI PRSSUR SRN, OI FITR ND OI OOR YPSS VV PRT NUMR DSRIPTION O N QUNTITY PR SSMY 687 SRN SSMY, Oil pressure 673 SKT, Oil pressure housing HOUSIN, Oil pressure screen 690 HOUSIN, Oil pressure screen & thermostatic valve 68 HOUSIN, Oil pressure screen STD-8 WSHR, / plain STD-86 SRW, /-0 x 3/3 to.00 long, hex. hd., slotted STD-86 SRW, /-0 x 3/3 to.00 long, hex. hd., slotted SKT, 7/8 O.D. x /8 I.D. x 3/3 annular VV SSMY. Temp. control, oil cooler bypass SKT, Valve assembly 9 W-79 SKT, Oil filter adapter * HOUSIN SSMY, Oil filter 778 S SSMY, Oil filter W-3** OI FITR, Short (spin on type) 3 STD-8 WSHR, / plain STD-60 WSHR, / lock, internal lock STD- NUT, /-0 plain 6 STD-86 SRW, /-0 x.00 long, hex. hd., self-locking VV SSMY, Temp. control, oil cooler bypass SKT, Valve assembly 9-0 STUD, /-0 x -/ long * This complete Oil Filter Housing ssembly is no longer available. ycoming will continue to supply a Filter lement Kit P/N W-089 which includes () element, () square gasket, () copper gasket and () flat gasket. ** Reference latest revision of SSP-88 for oil filter kits and replacement filters. P-- -

26 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. OI PRSSUR SRN, OI FITR ND OI OOR YPSS VV -6 P--

27 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SSORY HOUSIN ND RTD PRTS VUUM PUMP DRIV, OI OOR ND RTHR FITTINS FI. RF. 3 PRT NUMR DSRIPTION 683 SKT, ccessory adapter O N QUNTITY PR SSMY 6736 DPTR SSMY, Vacuum pump 3 STD-77 DOW, /8 diameter x / long STD-7 S, Oil, 7/8 I.D. x -/ O.D. x /6 wide 797 R SSMY, Vacuum pump driven WSHR, ccessory driven gear SKT, Vacuum pump OVR, Vacuum pump SPR, Vacuum pump stud 0 STD-8 WSHR, / plain STD-60 WSHR, / lock, internal lock STD- NUT, /-0 plain SPRIN, Oil cooler bypass 6 PUNR, Oil cooler bypass SKT, 7/8 O.D. x /8 I.D. x 3/ PU, Oil cooler bypass 7 STD-78 PU, 3/8-8 NPT llen pipe, slotted 8 76 FITTIN, reather (assemble in accessory hsg.) ONNTOR, ccy. hsg. to oil cooler inlet hose DPTR, Oil cooler connection 7898 OW, 763 WSHR, Oil cooler fitting 3 N777-8D OW, Universal 7 N90-8 SKT, Metal tube connection seal 760 OT, Oil cooler fitting P-- -7

28 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 3. VUUM PUMP DRIV, OI OOR ND RTHR FITTINS -8 P--

29 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. PRT NUMR SSORY HOUSIN ND RTD PRTS HYDRUI PUMP DRIV, OVR ND TTHMNTS DSRIPTION O N QUNTITY PR SSMY 796 R SSMY, Hydraulic pump driven 796 WSHR, ccessory driven gear SKT, ccessory drive adapter 767 DPTR SSMY, Hydraulic pump S, Oil, 7/8 I.D. x -/ O.D. x /6 wide 6 - STUD, /-0 x -/ long 7 STD-77 PIN, /8 diameter x / long 8 STD-3 WSHR, /6 plain 9 STD-7 WSHR, /6 lock, internal teeth 0 STD-0 NUT, /6-8 plain 833 SKT, Pump 6030 OVR, Pump 3 STD-8 WSHR, / plain STD-60 WSHR, / lock, internal teeth STD- NUT, /-0 plain 6 69 SKT, Hydraulic pump adapter pad OVR, Hydraulic pump adapter 8 STD-3 WSHR, /6 plain 9 STD-7 WSHR, /6 lock, internal teeth 0 STD-0 NUT, /6 plain P-- -9

30 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. HYDRUI PUMP DRIV, OVR ND TTHMNTS -0 P--

31 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS YINDR, PISTON ND VV TRIN ONNTIN RODS, PISTONS ND RIN SSMIS FI. RF. PRT NUMR DSRIPTION W-70 ONNTIN ROD SSMY 6 O N QUNTITY PR SSMY W-393 USHIN, onnecting rod, upper OT, onnecting rod W-86 NUT, onnecting rod bolt W-3 RIN, onnecting rod W-608 RIN, onnecting rod (alternate) W-3 RIN, onnecting rod (alternate) PISTON, ompression ratio 8.0: PISTON, ompression ratio 7.00: W-078 PIN, Piston PU, Piston pin 9 7 RIN, Piston, top compression RIN, Piston, oil regulating (expander type) 6 P-- 3-

32 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. ONNTIN RODS, PISTONS ND RIN SSMIS 3- P--

33 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS YINDR, PISTON ND VV TRIN YINDR SSMY FI. RF. 6 PRT NUMR DSRIPTION W- YINDR ND HD SSMY (Nitrided) 6 O N QUNTITY PR SSMY 707 ST, Intake valve ST, xhaust valve UID, Intake valve UID, xhaust valve INSRT, Spark plug, 8-. MM 7 3- STUD, /6-8 x -/ long 8-9 STUD, /-0 x -/8 long 6 9 MS083-6D OW, 3/8 flared tube USHIN, Rocker shaft STD-87 INSRT, /8-7 Heli-coil, taper pie thread 0* PU, /8 pipe x 3/8 long 6 * ssemble in cylinder head. P-- 3-3

34 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 6. YINDR SSMY 3- P--

35 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS YINDR, PISTON ND VV TRIN VV SSMY ND RTD PRTS FI. RF. 7 PRT NUMR DSRIPTION VV, Intake 6 O N QUNTITY PR SSMY W-900 VV, xhaust (rotator type) ST, Valve spring, lower intake 6 W-333 ST, Valve spring, lower exhaust 6 W-0077 ST, Valve spring, upper intake 6 6 W-67 ST, Valve spring, upper exhaust (rotator type) KY, Valve, intake 8 79 KY, Valve, exhaust (rotator type) P, Valve stem, exhaust (rotator type) 6 0 W-79 SPRIN, Valve, inner W-800 SPRIN, Valve, outer 0 PU, /8 pipe x 3/8 long 3 W-866 S, Shroud tube 7030 S, Shroud tube W-8 TU, Push rod shroud 6 W-99 SPRIN, Shroud tube 6 7 W-7 OKPT, Shroud tube 6 8 STD- NUT, /-0 plain 6 P-- 3-

36 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 7. VV SSMY ND RTD PRTS 3-6 P--

37 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS YINDR, PISTON ND VV TRIN YINDR RTD PRTS FI. RF. 8 PRT NUMR DSRIPTION O N QUNTITY PR SSMY 733* ROD SSMY, Push (total of required) R F997-3* ROD SSMY, Push (total of required) R F997-36* ROD SSMY, Push (total of required) R 7337* ROD SSMY, Push (total of required) R 78 RIN, Oil seal, 3/3 dia. section x -7/3 I.D PT, ylinder hold down nut 733 NUT, /-0 NF-3, cylinder hold down 73 NUT, 3/8- NF-3 6 7F933 ROKR SSMY, Valve USHIN, Valve rocker 8 W-3790 SHFT, Valve rocker 6 9 W-89 THRUST UTTON, Rocker shaft * See latest revision of ycoming Service Instruction No. 060 for complete push rod application. P-- 3-7

38 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 8. YINDR RTD PRTS 3-8 P--

39 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS YINDR, PISTON ND VV TRIN YINDR HD DRIN TUS, INTRYINDR OOIN FFS ND RTD PRTS FI. RF. 9 PRT NUMR DSRIPTION 7906 SKT, Rocker box cover 6 O N QUNTITY PR SSMY 67 OVR, Rocker box 6 3 STD-9 SRW, /-0 x /8 long, pan hd., self-locking 36 STD-3 WSHR, /6 plain STD-7 WSHR, /6 lock, internal teeth 6 STD-0 NUT, /6 plain 7 STD-68 NIPP, Straight, 3/8 I.D. hose 6 8 STD-8 HOS, 3/8 I.D. x -/ long 6 9 W-9--0 MP, Hose TU SSMY, yl. head oil drain, cyl. no TU SSMY, yl. head oil drain, cyl. no TU SSMY, yl. head oil drain, cyl. nos. 3,,,6 7 FF SSMY, Intercylinder 76 RTINR, Intercylinder baffle HOOK, Intercylinder baffle retainer P-- 3-9

40 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 9. YINDR HD DRIN TUS, INTRYINDR OOIN FFS ND RTD PRTS 3-0 P--

41 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS INITION SYSTM NDIX MNTOS ND MNTO DRIVS FI. RF. 0 PRT NUMR DSRIPTION W-36 USHION, Magneto drive O N QUNTITY PR SSMY 6 SKT, Magneto adapter 6 SKT, Magneto adapter 3 W-707 DPTR, Magneto W-396 DPTR, Magneto (right magneto) W-707 DPTR, Magneto (left magneto) W-68 SKT, Magneto OUPIN, Magneto drive 7303 OUPIN, Magneto drive (retard) 7 W-9096 R RTINR SSMY 8 67 RIN, all 9 W-9096* R RTINR SSMY 0 67* RIN, all W-900* R RTINR SSMY 67* RIN, all 3 W-36-7 MNTO, endix, impulse coupling (S6N-) W MNTO, endix (S6N-0) W MNTO, endix, retard breaker (S6N-00) W-36-6 MNTO, endix (S6N-0) W-36-7 MNTO, endix, impulse coupling (S6N-) W MNTO, endix, right magneto (S6N-0) W-36-7 MNTO, endix, impulse coupling (S6N-) W MNTO, endix (S6N-09) W MNTO, endix, impulse coupling (S6N-7) W MNTO, endix, electric tack pick-up (S6N-09) W MNTO, endix, impulse coupling (S6N-7) STD-77 WSHR, 3/ O.D. x /6 I.D. x /8 STD-7 WSHR, /6 lock, internal teeth 6 STD-0 NUT, /6-8 plain 7 66M938 MP, Magneto * Used with two S6N- Impulse Magnetos. P-- -

42 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 0. NDIX MNTOS ND MNTO DRIVS - P--

43 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. INITION SYSTM INITION HRNSSS ND TTHMNTS FOR NDIX MNTOS PRT NUMR DSRIPTION O N QUNTITY PR SSMY W-M-69* HRNSS SSMY, Magneto, left W-M-70* HRNSS SSMY, Magneto, right W-M-7 HRNSS SSMY, Magneto, left W-M-8 HRNSS SSMY, Magneto, right W-M-63 HRNSS SSMY, Magneto, left W-M-6 HRNSS SSMY, Magneto, right W-M-376 PT, spark plug cable 3 73 SRW, No. 0-3 self-locking W MP, -3/ I.D., offset W IP, One wire for / screw 6 W-060 IP, Two wire for / screw 7 W IP, Six wire for no. 0 screw 8 W MP, Three wire 9 STD-3 SRW, No. 6-3 x / long N36-63 NUT, No. 6-3 self-locking STD-69 SRW, No. 0-3 x / long STD-670 NUT, No. 0-3 self-locking 3 78 RKT, Twist STD-8 WSHR, / plain STD-60 WSHR, / lock 6 STD-696 WSHR, / plain R R R R 7 STD-87 SRW, / ZIP STRP 9 8-3** SPRK PU (hampion RM-0) * Used for parallel valve and Piper long top leads. ** See latest revision of ycoming Service Instruction No. 0 for complete listing of all approved spark plugs. P-- -3

44 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR.. INITION HRNSSS ND TTHMNTS FOR NDIX MNTOS - P--

45 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. PRT NUMR INITION SYSTM SIK MNTOS, HRNSSS, DRIVS ND SPRK PUS DSRIPTION O N QUNTITY PR SSMY OUPIN, Magneto drive W-36 USHION, Magneto drive 3 6 SKT, Magneto adapter W-707 DPTR, Magneto W-68 SKT, Magneto 6 STD-73 PIN, otter, 3/3 x 3/ long 7 66JSDNN* MNTO, Right and left (6) impulse coupling 066JP-0SNN* MNTO, Right (60) plain 66JSDNN* MNTO, eft (6) impulse coupling 66J3SDNN* MNTO, eft (6) impulse coupling 66JR37SNN* MNTO, eft (693) retard 66JP-0SN* MNTO, Right (67) plain 8 67U06 HRNSS SSMY, Ignition, right (M-96) 67U0638 HRNSS SSMY, Ignition, right (M-96) 67U0608 HRNSS SSMY, Ignition, right (M-878) 9 67U0609 HRNSS SSMY, Ignition, left (M-877) 67U0639 HRNSS SSMY, Ignition, left (M-96) 67U063 HRNSS SSMY, Ignition, left (M-607) ZIP STRP R 66M9 MP, Magneto STD-7 WSHR, /6 lock, internal teeth 3 STD-77 WSHR, Plain, 3/ O.D. x /3 I.D. x /8 thick STD-0 NUT, /6-8 plain 8-3 SPRK PU (hampion RM-0) 6 W-9096 R RTINR SSMY 7 67 RIN, all 8 W-9096 R RTINR SSMY 9 67 RIN, all 0 W-900 R RTINR SSMY 67 RIN, all * See latest revision of Service Instruction No. 3 for complete listing of approved Slick Magnetos. Incorporates long leads for Piper ircraft. See latest revision of Service Instruction No. 0 for complete listing of all approved spark plugs. Used when two S6N- Impulse Magnetos are installed. P-- -

46 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. SIK MNTOS, HRNSSS, DRIVS ND SPRK PUS -6 P--

47 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS MNTO HRNSS TTHIN PRT NO. 0P976-3 O-0-, -, -, -, -, - Part No. Part Name Qty. 0P976-3 MNTO HRNSS TTHIN W IP, wire W-060 IP, wire 3 STD-8 WSHR, / plain 0 STD-60 WSHR, / lock 8 STD-87 SRW, Rocker box ZIP STRP 8 W IP, wire 3 STD- NUT, / plain STD-696 WSHR, / plain (thin) 6 W-M-376 PT, 3 wire P-- -7

48 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS MNTO HRNSS TTHIN PRT NO. 0P976- O-0-, -, -, - Part No. Part Name Qty. 0P976- MNTO HRNSS TTHIN W IP, wire W-060 IP, wire STD-8 WSHR, / plain STD-60 WSHR, / lock 0 STD-87 SRW, / lock, rocker box ZIP STRP W IP, 6 wire W IP, wire STD-696 WSHR, / plain (thin) 6 N SRW, / x -/8 long STD-9 SRW, / x /8 long 78 RKT, Twist STD-69 SRW, No. 0 (bracket to clip) STD- WSHR, No. 0 (bracket to clip) STD-670 NUT, No. 0 (bracket to clip) W-M-376 PT, 3 wire -8 P--

49 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS TRI OMPONNTS PRSTOIT STRTRS ND TTHIN PRTS FI. RF. 3 PRT NUMR DSRIPTION W-7 STRTR, volt, / pitch (MZ-) O N QUNTITY PR SSMY W-7 STRTR, volt, / pitch (MH-06) STD-3 WSHR, /6 plain 3 STD-7 WSHR, /6 lock, internal teeth W-3-.6 OT, /6-8 x -/3 long, hex. head STD-0 NUT, /6-8 plain 3 FIUR 3. PRSTOIT STRTRS ND TTHIN PRTS P-- -

50 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS TRI OMPONNTS YOMIN IHT WIHT STRTR ND TTHIN PRTS FI. RF. PRT NUMR DSRIPTION 306* STRTR SSMY, volt, / pitch 398* STRTR SSMY, volt, / pitch 33 MOTOR ND SONOID SSMY ( volt) 399 MOTOR ND SONOID SSMY ( volt) 3 3D088 HOUISN SSMY, Starter support STD- DOW W--.7 OT, /-0 x -3/ long, hex. head 6 W--.00 OT, /-0 x.00 long, hex. head 7 STD-60 WSHR, / lock, internal teeth 3 8 STD-8 WSHR, / plain 3 9 STD-3 WSHR, /6 plain 0 STD-7 WSHR, /6 lock, internal teeth W-3-.6 OT, /6-8 x -/3 long, hex. head STD-0 NUT, /6-8 plain ** SHIM, Starter (housing shaped) R 09** SHIM, Starter R O N QUNTITY PR SSMY * Refer to latest revision of Starter Maintenance Manual SSP-90 for complete parts breakdown. ** Refer to latest revision of Service Instruction No. 7 for shim application. NOT See latest revision of Service Instruction No. for complete listing of F approved starters, generators, alternators, regulators and relays. FIUR. YOMIN IHT WIHT STRTR ND TTHIN PRTS - P--

51 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. PRT NUMR TRI OMPONNTS TRNTOR SSMIS ND TS DSRIPTION O N QUNTITY PR SSMY 393 TRNTOR SSMY, volt, 70 amp. W-36 TRNTOR, volt, 70 amp. (U-8-S) PUY, lternator 399 TRNTOR SSMY, volt, 70 amp. W-38 TRNTOR, volt, 70 amp. (X-8-S) PUY, lternator 7 W-37 TRNTOR SSMY, volt, 60 amp. 8 W-33 TRNTOR, volt, 60 amp. (Y-80-S) PUY, lternator 0 W-3 TRNTOR SSY., volt, 60 amp. (Y-67) T, lternator drive, 3/8 in. wide T, lternator drive, 3/8 in. wide (Piper) T, lternator drive, 3/8 in. wide (for Prestolite) 7773 T, lternator drive, ½ in. wide (hrysler V.,37.) 779 T, enerator drive,.9: drive 770 T, enerator drive,.0: drive NOT See latest revision of Service Instruction No. for complete listing of F approved starters, generator, alternators, regulators and relays. P-- -3

52 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR. TRNTOR SSMIS ND TS - P--

53 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 6 PRT NUMR TRI OMPONNTS TRNTOR MOUNTIN ND TTHIN PRTS DSRIPTION O N QUNTITY PR SSMY 0797 RKT, lternator OKPT, /6 bolt x.00 spacing 3 W OT, /6-8 x /6 long, hex. head 7380 INK, lternator adjusting STD-3 WSHR, /6 plain 6 W-3H0.7 OT, /6-8 x 3/ long, hex. head, dr. 7 STD-77 WSHR, Plain, 3/ O.D. x /3 ID x /8 thick 8 W-3H0.7 OT, /6-8 x 3/ long, hex. head, dr STRUT, lternator support 0 W-3H0.7 OT, /6-8 x 3/ long, hex. head, dr. STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick N6- OT, 3/8- x -37/6 long, hex. head, dr. end N6-7 OT, 3/8- x -6/6 long, hex. head, dr. end 3 STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick R R R R R R R R R STD-87 NUT, 3/8- slotted STD-73 PIN, otter, 3/3 diameter x 3/ long 6 N6-6 OT, 3/8- x -3/6 long, hex. head, dr. end SHIM, -/8 O.D. x 3/3 I.D. x /6 thick R R R R R R R R R 8 STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick R R R R R R R R R 9 STD-87 NUT, 3/8- slotted 0 STD-73 PIN, otter, 3/3 diameter x 3/ long P-- -

54 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 6. TRNTOR MOUNTIN ND TTHIN PRTS -6 P--

55 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 7 PRT NUMR TRI OMPONNTS TRNTOR MOUNTIN ND TTHIN PRTS DSRIPTION 7776* RKT, lternator O N QUNTITY PR SSMY 73 RKT, lternator OKPT, /6 bolt x.00 spacing 3 W OT, /6-8 x /6 long, hex. head W-009* INK, lternator adjusting 73 INK, lternator adjusting STD-3 WSHR, /6 plain 6 W-3H0.7 OT, /6-8 x 3/ long, hex. head dr. 7 STD-77 WSHR, Plain, 3/ O.D. x /3 I.D. x /8 thick 8 W-3H0.7 OT, /6-8 x 3/ long, hex. head dr STRUT, lternator support 0 W-3H0.7 OT, /6-8 x 3/ long, hex. head dr. STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick N6- OT, 3/8- x -/6 long, hex. head, dr. end N6-3 OT, 3/8- x 3-/6 long, hex. head, dr. end 3 STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick R R STD-87 NUT, 3/8- slotted STD-73 PIN, otter, 3/3 diameter x 3/ long SHIM, -/8 O.D. x 3/3 I.D. x.00 thick R R 7 N6-6 OT, 3/8- x -3/6 long, hex. head, dr. end 8 STD-690 WSHR, 3/6 O.D. x /6 I.D. x /6 thick R 9 STD-87 NUT, 3/8- slotted 0 STD-73 PIN, otter, 3/3 diameter x 3/ long * Special installation for Piper ircraft orp. P-- -7

56 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 7. TRNTOR MOUNTIN ND TTHIN PRTS -8 P--

57 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 8 PRT NUMR TRI OMPONNTS NRTOR MOUNTIN ND TTHIN PRTS DSRIPTION O N QUNTITY PR SSMY 709 RKT, enerator W OT, /6-8 x /6 long, hex. head OKPT, /6 bolt x.00 spacing 7608 INK, enerator adjusting STD-3 WSHR, /6 plain 6 W-3H0.7 OT, /6-8 x 3/ long, hex. head dr. 7 W-3S.6 OT, /6-8 x -/3 long, dr. end 8 STD-3 WSHR, /6 plain R R R R R R 9 STD-0 NUT, /6-8 slotted 0 STD-68 PIN, otter STD-77 WSHR, Plain, 3/ O.D. x /3 I.D. x /8 thick W-3H0.7 OT, /6-8 x 3/ long, hex. head dr. P-- -9

58 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 8. NRTOR MOUNTIN ND TTHIN PRTS -0 P--

59 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS OI SUMP ND INDUTION SYSTM OI SUMP SSMY, RURTORS ND TTHMNTS FI. RF. 9 PRT NUMR DSRIPTION W-3306 SKT, Oil sump O N QUNTITY PR SSMY W-390 SUMP SSMY, Oil ONNTION, Intake pipe 6 - STUD, /-0 x -3/8 long 3- STUD, /6-8 x -7/8 long STUD, 3/8-6 x -7/8 long 8 7 STD-73 INSRT, /-0 Heli-oil x / long 8 STD-8 WSHR, / plain 3 9 STD-60 WSHR, / lock, internal teeth 7 0 W--.3 OT, /-0 x -/8 long, hex. head 7 W--.00 OT, /-0 x.00 long, hex. head 6 STD- NUT, /-0 plain 3 STD- PU, /- NPT, sq. head, drilled STD-9 PU, /- NPT, llen head 708 SRN, Oil suction SKT,.00 I.D. x -/ O.D. x 3/3 thick 6 W- PU,.00-0 thread x /8 hex. head 7 STD-9 PU, /- NPT, llen head 8 66 SKT, arburetor RURTOR, (0-0) (Model M--) 7 RURTOR, (0-0-) (Model M--) W-00 RURTOR, (0-0) (Model M--) 0 STD-3 WSHR, /6 plain STD-0 NUT, /6-8 plain STD-36 OKNUT, /6, Palnut P-- 6-

60 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FIUR 9. OI SUMP SSMY, RURTORS ND TTHMNTS 6- P--

61 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS OI SUMP ND INDUTION SYSTM INTK PIPS ND TTHMNTS FI. RF. 30 PRT NUMR DSRIPTION 708 PIP, Intake 6 O N QUNTITY PR SSMY HOS, -3/ I.D. x -3/6 O.D. x -3/ long 6 3 W MP, Hose 7973 SKT, bolt flange, -7/8 I.D FN, Intake pipe, upper 6 6 STD-8 WSHR, / plain 7 STD-60 WSHR, / lock, internal teeth 8 W--. OT, /-0 x -/ long, hex. head FIUR 30. INTK PIPS ND TTHMNTS P-- 6-3

62 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS FI. RF. 3 PRT NUMR OI SUMP ND INDUTION SYSTM PRIMIN SYSTM DSRIPTION O N QUNTITY PR SSMY W TU SSMY, Primer, cylinder no. 3 W TU SSMY, Primer, cylinder no. 3 W TU SSMY, Primer, cylinder no. and 6 W TU SSMY, Primer, intermediate, right W TU SSMY, Primer, intermediate, left 6 W-98 SV, Primer line 7 W MP, Primer line 8 W MP, Primer liner 9 STD-3 SRW, No. 6-3 x / long, round head 0 N36-63 NUT, No. 6-3, self-lock STD-83 T, Union, /8 tube D08 NIPP SSMY, Primer FIUR 3. PRIMIN SYSTM 6- P--

63 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SRVI KIT STION S ND SKT ST Part No. Part Name Qty S ND SKT ST W-7 OKPT, Shroud tube 6 W-68 SKT, Magneto W-79 SKT, Oil filter adapter W-3306 SKT, Oil sump W-379 S, rankshaft oil W-60 S, Tachometer drive oil W-99 SPRIN, Shroud tube 6 W-68 S, rankshaft W-8638 OKPT, rankshaft gear W-866 S, Shroud tube MS66-08 RIN, Internal retaining SKT, Oil suction screen STD-3 S, Oil SKT, nnular SKT, nnular STD-7 S, Oil 69- SKT, Fuel pump 833 SKT, Vacuum pump SKT, Fuel pump 673 SKT, Oil pressure housing 683 SKT, ccessory adapter 6 SKT, Magneto adapter W-996 SKT, xhaust flange 6 66 SKT, arburetor 683 SKT, ccessory drive adapter 696 SKT, Fuel pump adapter 693 SPR 6 69 SKT, ccessory drive adapter 7030 S, Shroud tube 70 SKT 707 SKT 78 RIN, Oil seal OKPT, Fuel pump idler gear 7973 SKT, olt flange SKT, overnor 709 SKT, Oil filler extension 707 RIN, Oil seal OKPT, am gear 709 RIN, Oil seal 70 SKT 73 RIN, Oil seal OKPT, enerator bracket 7388 SKT, ccessory housing 706 O RIN, Oil level gage 7068 O RIN 730 S 7906 SKT, Rocker box cover SKT 7690 S, rankshaft oil P-- 7-

64 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SRVI KIT STION YINDR, PISTON ND RIN SSMY O-0-, -, -, -, - Part No. Part Name Qty. 0K03 YINDR, PISTON ND RIN SSMY W- YINDR ND HD SSMY W-900 VV, xhaust VV, Intake W-800 SPRIN, Valve, outer W-79 SPRIN, Valve, inner W-0077 ST, Valve spring, upper, intake W-67 ST, Valve spring, upper, exhaust W-333 ST, Valve spring, lower, exhaust KY, Valve, intake 79 KY, Valve, exhaust P, Valve stem, exhaust 73 PISTON 7 RIN, Piston, compression 7387 RIN, Piston, oil regulating W-077 PIN, Piston W-77 PU, Piston pin 6088 PU, Piston pin 78 RIN, ylinder base seal W-866 S, Shroud tube 7030 S, Shroud tube 7906 SKT, Rocker box cover SSP-7 T SSP-7 T 6 ST, Valve spring, lower, intake 7- P--

65 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SRVI KIT STION YINDR, PISTON ND RIN SSMY O-0-, -, -, -, - Part No. Part Name Qty. 0K0 YINDR, PISTON ND RIN SSMY W- YINDR ND HD SSMY W-900 VV, xhaust VV, Intake W-800 SPRIN, Valve, outer W-79 SPRIN, Valve, inner W-0077 ST, Valve spring, upper, intake W-67 ST, Valve spring, upper, exhaust W-333 ST, Valve spring, lower, exhaust KY, Valve, intake 79 KY, Valve, exhaust P, Valve stem, exhaust 7089 PISTON 7 RIN, Piston, compression 7387 RIN, Piston, oil regulating W-077 PIN, Piston W-77 PU, Piston pin 6088 PU, Piston pin 78 RIN, ylinder base seal W-866 S, Shroud tube 7030 S, Shroud tube 7906 SKT, Rocker box cover SSP-7 T SSP-7 T 6 ST, Valve spring, lower, intake P-- 7-3

66 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS SRVI KIT STION RNKS SSMY ND OVRNOR STUD KIT O-0-, -, -, -, -, -, -, - Part No. Part Name Qty. W-033-S RNKS SSMY ND OVRNOR STJUD KIT W-033* RNKS SSMY 3- STUD, N governor 3-6 STUD, Woodward governor *See Figure, Page - for component parts. RNKS SSMY ND OVRNOR STUD KIT O-0-, - Part No. Part Name Qty. W-96-S RNKS SSMY ND OVRNOR STJUD KIT W-96* RNKS SSMY STD-339 PU 6 3- STUD, N governor 3-6 STUD, Woodward governor *See Figure, Page - for component parts. 7- P--

67 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX PRT NO. PRT NM P NO. PRT NO. PRT NM P NO. N6- olt -7 W-0 earing - N6- olt - W-033 rankcase ssembly - N6-6 olt - W-8 Tube 3- N6-6 olt -7 W-7 earing - N6-7 olt - W-73 Spring - N6- olt -3 W-70 onnecting Rod 3- N6-3 olt -7 W-79 Spring 3- N6-3 olt -3 W-800 Spring 3- N36-63 Nut -3 W-96 rankcase ssembly - N36-63 Nut 6- W-997 Seal - N777-8D lbow -6 W Tube ssembly 6- N90-8 asket -6 W Tube ssembly 6- W-M-376 Plate -3 W Tube ssembly 6- W-M-7 Harness ssembly -3 W Tube ssembly 6- W-M-8 Harness ssembly -3 W-86 Nut 3- W-M-63 Harness ssembly -3 W-7 ockplate 3- W-M-6 Harness ssembly -3 W-7 ylinder ssembly 3-3 W-M-69 Harness ssembly -3 W- Plug 6- W-M-70 Harness ssembly -3 W-98 Sleeve 6- W--0.9 olt - W-68 asket - W--.00 olt 6- W-68 asket - W--.3 olt -3 W-707 dapter - W--.3 olt - W-707 dapter - W--.3 olt 6- W-79 asket - W--. olt 6-3 W-89 Thrust utton 3-7 W--.0 olt -3 W-3 Oil Filter - W--.7 olt -3 W-3306 asket 6- W--.7 olt - W-333 Seat 3- W--.88 olt - W-3 earing 3- W--.00 olt - W-3 earing 3- W-S.0 olt -3 W-36 ushion - W-3H0.7 olt - W-36 ushion - W-3H0.7 olt -7 W-3790 Shaft 3-7 W-3H0.7 olt -9 W-379 Seal - W olt - W-379 Shaft - W olt -7 W-388 earing - W olt -9 W-388 earing - W-3-.6 olt - W-3896 Plug -0 W-3-.6 olt - W-390 Sump ssembly 6- W-3S.6 olt -9 W-393 ushing 3- W olt -3 W-396 dapter - W-0077 Seat 3- W-060 lip -3 W-009 ink -7 W-078 Pin 3- W-00 arburetor 6- W-60 Seal - W-067 Dowel - W-33 lternator ssembly -3 P-- 8-

68 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX (ONT.) PRT NO. PRT NM P NO. PRT NO. PRT NM P NO. W-3 lternator ssembly -3 W Magneto - W-38 lternator -3 W Magneto - W-36 lternator -3 W Magneto - W-37 lternator ssembly -3 W-36-6 Magneto - W-73 age ssembly -3 W-36-7 Magneto - W-73 age ssembly -3 W-36-7 Magneto - W-76 age ssembly -3 MS66-08 Ring -9 W-77 age ssembly -3 MS083-6D lbow 3-3 W-779 age ssembly -3 STD-8 Washer -3 W-80 Ring -7 STD-8 Washer - W-99 Spring 3- STD-8 Washer - W-7 Fuel Pump -3 STD-8 Washer -6 W-7 Starter - STD-8 Washer -8 W-7 Starter - STD-8 Washer -3 W-9--0 lamp 3-9 STD-8 Washer - W lamp 6-3 STD-8 Washer 6- W-68 Seal - STD-8 Washer 6-3 W-607 earing - STD-33 Washer -3 W-608 earing 3- STD-33 Washer -3 W-606 Support ssembly -7 STD-33 Washer -3 W lip -3 STD-3 Washer -0 W lamp 6- STD-3 Washer - W lip -3 STD-3 Washer -8 W lamp -3 STD-3 Washer 3-9 W Magneto - STD-3 Washer - W Magneto - STD-3 Washer - W-67 Seat 3- STD-3 Washer - W-808 Spring - STD-3 Washer -7 W-809 Impeller - STD-3 Washer -9 W-80 Impeller ssembly - STD-3 Washer 6- W-8638 ockplate -7 STD-36 ocknut 6- W-866 Seal 3- STD-68 Pin -9 W-8667 Pin -9 STD-60 Washer -3 W lamp -3 STD-60 Washer - W lamp 6- STD-60 Washer - W-900 Valve 3- STD-60 Washer -6 W-9096 ear Retainer - STD-60 Washer -8 W-9096 ear Retainer - STD-60 Washer -3 W-900 ear Retainer - STD-60 Washer - W-900 ear Retainer - STD-60 Washer 6- W-9 ounterweight ssy. -7 STD-60 Washer 6-3 W-97 ounterweight ssy. -7 STD- Washer - W-998 Ring 3-3 STD-7 Washer -0 W-999 Ring 3-3 STD-7 Washer -8 W-930 amshaft ssembly -9 STD-7 Washer P--

69 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX (ONT.) PRT NO. PRT NM P NO. PRT NO. PRT NM P NO. STD-7 Washer - STD- Nut - STD-7 Washer - STD- Nut -6 STD-7 Washer - STD- Nut -8 STD-7 Washer - STD- Nut 3- STD- Dowel - STD- Nut 6- STD- Dowel - STD-0 Nut - STD- Plug 6- STD-0 Nut -9 STD-3 Screw -3 STD-77 Washer - STD-3 Screw 6- STD-77 Washer - STD-7 Dowel - STD-77 Washer - STD-96 Nut -3 STD-77 Washer -7 STD-96 Nut -3 STD-77 Washer -9 STD-670 Nut -3 STD-77 Dowel -6 STD-678 Washer -3 STD-77 Pin -8 STD-678 Washer -3 STD-8 Hose 3-9 STD-678 Washer -3 STD-86 Screw - STD-68 Nipple 3-9 STD-87 Insert 3-3 STD-690 Washer - STD-87 Screw -3 STD-690 Washer -7 STD-88 Screw -3 STD-69 Screw -3 STD-9 Screw 3-9 STD-696 Washer -3 STD-67 Screw - STD-73 Pin - STD-09 olt -7 STD-73 Pin - STD-7 Seal -6 STD-73 Pin -7 STD-9 Plug 6- STD-737 Key -0-9 Stud 3-3 STD-78 Plug - -0 Stud - STD-78 Plug -6 - Stud 6- STD-83 Tee 6- - Stud -8 STD-87 Nut -3 - Stud - STD-87 Nut - 3- Stud - STD-87 Nut Stud - STD-06 Dowel Stud 3-3 STD-73 Insert Stud - STD- Plug Stud - STD-339 Plug - 3- Stud 6- STD-09 Nut Stud - STD-0 Nut Stud - STD-0 Nut -8 3D-7 Stud - STD-0 Nut Stud - STD-0 Nut Stud - STD-0 Nut Stud 6- STD-0 Nut Stud - STD-0 Nut - 0- Stud - STD-0 Nut all - STD- Nut -3 0 Plug - P-- 8-3

70 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX (ONT.) PRT NO. PRT NM P NO. PRT NO. PRT NM P NO. 0 Plug Housing - 0 Plug Plate Plug 3-69 asket Spark Plug Hose Spark Plug onnector asket Stud asket Dowel Key Seal asket Shaft over ear over ear Strap Roller Plug racket Plug asket Spring racket asket asket asket Screen 6-67 over Pipe Plunger Nut uide Nut asket - 78 Ring asket elt -3 6 Plunger Washer Plug Washer Housing dapter Screen ssembly Hook Retainer - 76 Retainer over olt -6 6 Seat Washer asket Plug ushing Fitting Stud - 76 ear ssembly Insert ear ssembly ushing dapter ssembly dapter ssembly onnection 6-67 earing Tube ssembly earing ushing asket Washer Spacer asket Spring - 70 Roller Tube ssembly asket Tube ssembly Seat Housing Seat over ushing Spring ushing P--

71 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX (ONT.) PRT NO. PRT NM P NO. PRT NO. PRT NM P NO. 706 ushing ink Seal ushing Ring - 76 Shaft - 7 affle ssembly Support ssembly -7 7 ushing olt 3-7 Support ssembly Piston elt Dowel - 73 Ring ink - 73 Screw Piston over ushing ear ushing arburetor xtension Roller xtension racket asket ody ink ear ssembly Spacer Roller Housing ssembly ear ssembly Shaft ssembly oupling asket oupling Plug oupling Shim Washer Shim Washer Zip Strap Washer Zip Strap - 73 Washer Spring Flange xtension ockplate Support ssembly ockplate elt ockplate racket Rod ssembly xtension Rod ssembly ase ssembly ushing Housing ssembly asket Plunger ssembly Ring Seal Valve 3-78 Socket Plug ody Plug lbow O Ring Shim - 7 arburetor 6-09 Shim uide Seal -8 7 Ring asket xtension asket Strut asket Strut asket - 73 racket racket - P-- 8-

72 O-0-, - ND - SRIS PRTS TO STNDRD YINDR FN RNKS MOD NINS NUMRI INDX (ONT.) PRT NO. PRT NM P NO. PRT NO. PRT NM P NO racket lternator ssembly rankshaft lternator ssembly rankshaft ssembly Pulley rankshaft ssembly elt -3 3F77 rankshaft elt -3 3F7779 rankshaft ssembly elt -3 3S967 ear Valve ssembly - F997-3 Rod ssembly D08 Nipple ssembly 6- F Rod ssembly J3SDNN Magneto ap 3-66JSDNN Magneto - 79 Key 3-66JP-0SN Magneto - 7F933 Rocker ssembly JP-0SNN Magneto earing - 66JR37SNN Magneto - 89 earing - 66M938 lamp - 8D939 earing - 66M9 lamp earing - 67U0608 Harness ssembly Starter ssembly - 67U0609 Harness ssembly Starter ssembly - 67U06 Harness ssembly - 3D088 Housing ssembly - 67U063 Harness ssembly - 33 Motor & Solenoid - 67U0638 Harness ssembly Motor & Solenoid - 67U0639 Harness ssembly P--

TEXTRON Lycoming AIRCRAFT ENGINES

TEXTRON Lycoming AIRCRAFT ENGINES O-60-AP Wide Cylinder Flange Crankcase Model Engines PARTS CATALOG PC-06-6 MARCH 99 0-60-AP PARTS CATALOG This illustrated parts catalog contains a complete parts listing