K Used FEATURES:

Size: px

Start display at page:

Download "K Used FEATURES:"

Marjorie Moody
6 years ago
Views:

grinding technologies SPECIAL OFFERS November 2017 K250 3100 Used FEATURES: Rotating magnetic chuck width 150mm from 0 to 90 ; Angular divisor for magnetic chuck; Grinding motor 7,5 kw (10 HP);

1 grinding technologies SPECIAL OFFERS November 2017 K Used FEATURES: Rotating magnetic chuck width 150mm from 0 to 90 ; Angular divisor for magnetic chuck; Grinding motor 7,5 kw (10 HP); Segment holding ring Ø200mm with quick change; Reverse grinding wheel rotation; Variable carriage speed from 1 to 30 m/min with carriage run adjustment controlled electronically by PLC; Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC); Longitudinal grinding head angle adjustment from 0 to 3 ; Grinding wheel quick up and down approach, and slow down approach; Separate coolant collection tank fitted with 80 l/min. motor pump; Automatic lubrication; Supplied with the machine n.4 rotating cutting edge reference; MVM Srl Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) Fax (+ 39) mvmsrl@mvmsrl.it - Web site:

Showroom LA500 NC PLC stop at preset height; Rotating head range 0-90, tilting 0-5 for grinding circular blades,

for perfect grinding of any angle; Magnetic chuck Ø300mm; Variable rotating chuck speed 3-35 RPMr.

Base Coolant pump; Chain driven carriage; AFFILELLA AFFILELLA is a professional machine for sharpening domestic

There are two helicoidal borazon grinding wheels for sharpening the knives, a ceramic grinding wheel for sharpening

2 Showroom LA500 NC PLC stop at preset height; Rotating head range 0-90, tilting 0-5 for grinding circular blades, using an easy to read vernier scale; Grinding wheel motor 5 HP with clockwise and anticlockwise rotation direction for perfect grinding of any angle; Magnetic chuck Ø300mm; Variable rotating chuck speed 3-35 RPMr. BM850 Cast iron machine bed; stop at preset height. Base Coolant pump; Chain driven carriage; AFFILELLA AFFILELLA is a professional machine for sharpening domestic knives, kitchen knives and scissors. There are two helicoidal borazon grinding wheels for sharpening the knives, a ceramic grinding wheel for sharpening the scissors and a wheel for polishing the bevel. ZX 1230 Basement; Cast iron machine bed; Grinding motor 2.2 kw (3 HP); stop at preset height. Tilting head to grind hollow surfaces; Coolant pump; Chain driven carriage; * In some cases, the photos do not match the model proposed 2

PX1000 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right

Supplied with stepped blocks to grind 4 overlapping planer blades simultaneously; Variable

sz75 band saw setting machine Robust cast-iron main machine housing; All gears housed in an oil

Hardened steel self-centring vices; Speed regulator (40-200 teeth/min); sx80 band saw blade

3 PX1000 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right Heavy duty grinding motor 2,2 k W (3 HP) RPM; Tilting head to grind hollow surfaces; Supplied with stepped blocks to grind 4 overlapping planer blades simultaneously; Variable carriage speed 1-20 m/min; External tank with coolant pump; Switch for carriage run adjustment. sz75 band saw setting machine Robust cast-iron main machine housing; All gears housed in an oil bath (10 kg). Hardened steel self-centring vices; Speed regulator ( teeth/min); sx80 band saw blade grinding machine Robust cast-iron main machine housing; All gears housed in an oil bath (10 kg). Vibration-free band saw movement; Sensitive controls for high precision adjustment; Speed regulator; Cooling system; 3

4 Used band sawing machine Automatic band sawing machine Forte 4

AUTOMATIC KNIFE LOADER AUTOMATIC LOADER FOR 10 KNIVES UP TO 1500 mm Loading of blades on the automatic loader and the entering of program number and the blade length Start-up cycle: The

-35 Demagnetization of chuck followed by alignment the blade by pneumatic actuator Actuator moves back and the chuck magnetizes Rotation of chuck to the angle set in the desired program Start

working cycle for roughing, finishing and spark-out begins At the end of the automatic cycle the carriage stops at the right inversion point The chuck rotates to zero degrees and demagnetizes

of the chuck Blade is unloaded Rotation of chuck to -10 Washing and drying cycle along length of chuck Afterwards the carriage moves to the working cycle starting point The magnetic chuck

5 AUTOMATIC KNIFE LOADER AUTOMATIC LOADER FOR 10 KNIVES UP TO 1500 mm Loading of blades on the automatic loader and the entering of program number and the blade length Start-up cycle: The carriage positions itself at a default position with respect to the zero point of the machine The loader places the blade on the magnetic chuck Magnetic chuck magnetizes Rotation of chuck to -35 Demagnetization of chuck followed by alignment the blade by pneumatic actuator Actuator moves back and the chuck magnetizes Rotation of chuck to the angle set in the desired program Start grinding wheel, coolant pump and carriage movement Fast approach of the grinding wheel to the blade followed by slow descent When the grinding wheel touches the work-piece the automatic working cycle for roughing, finishing and spark-out begins At the end of the automatic cycle the carriage stops at the right inversion point The chuck rotates to zero degrees and demagnetizes A blade washing cycles follows between the two inversions points At the end the grinding wheel moves to the zero position point and the carriage moves to the cycle start point Demagnetization of the chuck Blade is unloaded Rotation of chuck to -10 Washing and drying cycle along length of chuck Afterwards the carriage moves to the working cycle starting point The magnetic chuck returns to zero degrees Begin a new working cycle MVM Srl Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) Fax (+ 39) mvmsrl@mvmsrl.it - Web site:

KS Back from exhibition

KS Back from exhibition grinding technologies SPECIAL OFFERS April 2018 KS250-1500 FEATURES: PLC Siemens touchscreen; Rotating magnetic chuck +/-90 ; Grinding motor 7,5 kw (10 HP); Segment holding ring Ø250; Quick change of the