KS Back from exhibition

Size: px

Start display at page:

Download "KS Back from exhibition"

Marshall Turner
6 years ago
Views:

grinding technologies SPECIAL OFFERS April 2018 KS250-1500 FEATURES: PLC Siemens touchscreen; Rotating magnetic chuck +/-90 ; Grinding motor 7,5 kw (10 HP); Segment holding ring Ø250; Quick change of

(PLC); Automatic lubrication; Programmable work cycles: roughing, finishing, spark-out; Longitudinal grinding head angle adjustment from 0 to 3 ; Grinding wheel quick up and down approach, and slow

1 grinding technologies SPECIAL OFFERS April 2018 KS FEATURES: PLC Siemens touchscreen; Rotating magnetic chuck +/-90 ; Grinding motor 7,5 kw (10 HP); Segment holding ring Ø250; Quick change of the grinding wheel; Variable carriage speed from 1 to 30 m/min with carriage run adjustment Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC); Automatic lubrication; Programmable work cycles: roughing, finishing, spark-out; Longitudinal grinding head angle adjustment from 0 to 3 ; Grinding wheel quick up and down approach, and slow down approach; Separate coolant collection tank fitted with 80 l/min. motor pump; Ammeter for grinding wheel motor; Remote pushbutton; Short bellows. MVM Srl Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) Fax (+ 39) mvmsrl@mvmsrl.it - Web site:

LA700 Rotating head range 0-90, tilting 0-5 for grinding circular blades, using an easy to read vernier scale; Grinding wheel motor 5 HP with clockwise and anticlockwise

2 kw (3 HP); Chain driven carriage. AFFILELLA AFFILELLA is a professional machine for sharpening domestic knives, kitchen knives and scissors.

2 LA700 Rotating head range 0-90, tilting 0-5 for grinding circular blades, using an easy to read vernier scale; Grinding wheel motor 5 HP with clockwise and anticlockwise rotation direction for perfect grinding of any angle; Magnetic chuck Ø300mm; Variable rotating chuck speed 3-35rpm. ZX 1000 Basement; Grinding motor 2.2 kw (3 HP); Chain driven carriage. AFFILELLA AFFILELLA is a professional machine for sharpening domestic knives, kitchen knives and scissors. There are two helicoidal borazon grinding wheels for sharpening the knives, a ceramic grinding wheel for sharpening the scissors and a wheel for polishing the bevel. * In some cases, the photos do not match the model proposed 2

PX1350 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right;

overlapping planer blades simultaneously; Variable carriage speed 1-20 m/min; External tank

5 kw; Grinding wheel diameter Ø127mm; Maximum external diameter of blade Ø300mm; Variable

divisor for magnetic chuck; Grinding motor 30 kw (40 HP); Segment holding ring Ø400 mm;

3 PX1350 Mini-PLC controlling automatic downfeed, sparkout and downfeed right or left and right; Heavy duty grinding motor 3,7 kw (5 HP) RPM; Supplied with stepped blocks to grind 4 overlapping planer blades simultaneously; Variable carriage speed 1-20 m/min; External tank with coolant pump; Switch for carriage run adjustment. LA300 Grinding wheel motor power 1.5 kw; Grinding wheel diameter Ø127mm; Maximum external diameter of blade Ø300mm; Variable speed of blade support 3-35 rpm; Basement; Equipment for bedknives. BM850 Base Chain driven carriage. FX Rotating magnetic chuck dense polarity from -90 to +90 (width 300 mm); Angular divisor for magnetic chuck; Grinding motor 30 kw (40 HP); Segment holding ring Ø400 mm; Digital programmer PLC; Automatic lubrication; Variable carriage speed from 1 to 30 m/min; Automatic grinding wheel downfeed and fully programmable working cycle by means of a digital programmer (PLC); 3

hardened steel guides; 90 rotating magnetic

AF2000 Grinding wheel motor 4 kw; Rotating

carriage speed 1-20m/min; External coolant

4 LX 6.3 stop at preset height. Carriage run guides covered with replaceable hardened steel guides; 90 rotating magnetic chuck 630mm lenght; Chain driven carriage; AF2000 Grinding wheel motor 4 kw; Rotating magnetic chuck 2000mm x 120mm; Variable carriage speed 1-20m/min; External coolant tank; Grinding wheel Ø178mm. Used band sawing machine Automatic band sawing machine Forte 4

AUTOMATIC KNIFE LOADER AUTOMATIC LOADER FOR 10 KNIVES UP TO 1500 mm Loading of blades on the automatic loader and the entering of program number and the blade length Start-up cycle: The

-35 Demagnetization of chuck followed by alignment the blade by pneumatic actuator Actuator moves back and the chuck magnetizes Rotation of chuck to the angle set in the desired program Start

working cycle for roughing, finishing and spark-out begins At the end of the automatic cycle the carriage stops at the right inversion point The chuck rotates to zero degrees and demagnetizes

of the chuck Blade is unloaded Rotation of chuck to -10 Washing and drying cycle along length of chuck Afterwards the carriage moves to the working cycle starting point The magnetic chuck

5 AUTOMATIC KNIFE LOADER AUTOMATIC LOADER FOR 10 KNIVES UP TO 1500 mm Loading of blades on the automatic loader and the entering of program number and the blade length Start-up cycle: The carriage positions itself at a default position with respect to the zero point of the machine The loader places the blade on the magnetic chuck Magnetic chuck magnetizes Rotation of chuck to -35 Demagnetization of chuck followed by alignment the blade by pneumatic actuator Actuator moves back and the chuck magnetizes Rotation of chuck to the angle set in the desired program Start grinding wheel, coolant pump and carriage movement Fast approach of the grinding wheel to the blade followed by slow descent When the grinding wheel touches the work-piece the automatic working cycle for roughing, finishing and spark-out begins At the end of the automatic cycle the carriage stops at the right inversion point The chuck rotates to zero degrees and demagnetizes A blade washing cycles follows between the two inversions points At the end the grinding wheel moves to the zero position point and the carriage moves to the cycle start point Demagnetization of the chuck Blade is unloaded Rotation of chuck to -10 Washing and drying cycle along length of chuck Afterwards the carriage moves to the working cycle starting point The magnetic chuck returns to zero degrees Begin a new working cycle MVM Srl Correggio (RE ) ITALY- Via del Progresso, 14 Tel. (+ 39) Fax (+ 39) mvmsrl@mvmsrl.it - Web site:

K Used overhauled. FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm;

K Used overhauled. FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm; grinding technologies SPECIAL OFFERS June 2018 K250 2100 FEATURES: Grinding wheel motor 7.5 kw; Grinding segments holder Ø200mm; Magnetic chuck thin polarity 2100x150mm; PLC; Angular divisor +/-90 : Inversion