insulation machinery

Transcription

1 insulation machinery

2 Dear Hundt customer, Wilhelm Hundt GmbH is a family-owned company based in Wuppertal (Germany) that has been dealing in tools and machinery for over 50 years. We specialise in supplying the needs of thermal and noise insulation fitters, roofing contractors, facade builders, tinsmiths, plumbers, ventilation fitters and craftsmen in interior finishing. Drawing on our many years of experience, we produce and service insulation machinery. Whether you need sheet metal to be punched, folded, cut or rounded, we can provide you with the right machine and the matching tool for the job. This brochure is an excerpt from our product range of sheet metal processing machines. Many of these machines are produced by Hundt. Our own range of machinery is supplemented with products from other well-known manufacturers. Please take note of our comprehensive range consisting of: Insulation machinery + accessories / spare parts / used machines / for rent Construction site equipment Hand tools + spare parts Power tools + accessories + spare parts Cable reels + extensions + work lights Self-tapping screws + rivets Toggle latches + band clamps We highly recommend that you visit our online shop where you will find a current selection of about items. The range of products is constantly updated and extended. While visiting the online shop, check out the latest news from our manufacturers and our special offers. In the HUNDT online shop you can safely and easily order everything you need and as a registered customer as is common practice today manage your own account. We hope that our brochure and our website will find your interest and we look forward to hearing from you soon, Yours Wilhelm Hundt GmbH

3 Hundt Rectilinear Punching Machine RS 6/1000 (foot-operated) Fig.: RS6/1000 (left), collection tray for stamping waste (right) Foot-operated rectilinear punching machine for punching of blanks for pipe insulation. The reasoning behind the design of this machine was to provide a simple, robust construction that could be transported easily and safely (due to their low weight). The punching units are bolted to the machine frame; later addition or adjustment of the punching unit distances is not possible. Standard accessories: 6 punching units with punch holes of Ø 3.3 mm (if required Ø mm possible), collecting tray for stamping waste Special accessories: additional punching units (only supplied as original equipment), punch holes from Ø mm Technical data RS 6/1000 Work width 1,020 mm Max. plate thickness (steel 400N/mm 2 ) 1.25 mm Hole spacing symmetrical Weight approx. 58 kg Packaging dimensions approx. 130x80x130 cm Item No

4 Hundt Rectilinear Punching Machine RSH / RSF 6 (hand- or foot-operated) Fig.: RSF6/1000 (left), collection tray for stamping waste (right) Hand- or foot-operated rectilinear punching machine for punching of blanks for pipe insulation. The reasoning behind the design of this machine was to provide a simple, robust construction that could be transported easily and safely (due to their low weight). The punching units are bolted to the machine frame; later addition or adjustment of the punching unit distances is not possible. Standard accessories: 6 punching units with punch holes of Ø 3.3 mm (if required Ø mm possible), collecting tray for stamping waste Special accessories: additional punching units (only supplied as original equipment), punch holes from Ø mm Technical data RSH 6/1000 RSH 6/1250 RSF 6/1000 RSF6/1250 Work width 1020 mm 1270 mm 1020 mm 1270 mm Max. plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm 1.25 mm 1.25 mm Hole spacing symmetrical symmetrical symmetrical symmetrical Weight approx. 58 kg 58 kg 58 kg 58 kg Packaging dimensions approx. 130x80x130 cm 130x80x130 cm 130x80x130 cm 130x80x130 cm Item No

5 Hundt Rectilinear Punching Machine RSE 6 (electrical) Fig.: RSE 6/1000 Rectilinear punching machine in electric version, for punching blanks for pipe insulation. The punching process is carried out by a gear motor which drives the eccentric shaft directly. An electrical controller is optimised to ensure the direction of rotation is always correct. This prevents the possible swapping of phases in varying electrical plug connectors. The punching process starts when the footswitch is pressed. The punching units are secured by two clamping rails and can be replaced, added and adjusted to the required hole spacing in no time. The hole spacing at the edges are adjustable by stoppers. An extendable table extension provides good plate support. Standard accessories: 6 punching units with punch holes of Ø 3.3 mm (if required Ø mm possible), connecting cable with CEE plug, collecting tray for stamping waste Special accessories: additional punching units, punch holes from Ø mm Technical data RSE 6/1000 RSE 6/1250 Work width 1020 mm 1270 mm Max. plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm smallest hole spacing (between punching units) 60 mm 60 mm Supply voltage 380 V 380 V Motor rating 1.1 kw 1.1 kw Weight approx. 150 kg 160 kg Packaging dimensions approx. 130x80x110 cm 155x80x110 cm Item No

6 Hundt Rectilinear Punching Machine RDE 5/1000 (electrical) Abb.: RDE 5/1000 Rectilinear punching machine in electric version, for punching blanks for pipe insulation with rear ventilation. The punching process is carried out by a gear motor which drives the eccentric shaft directly. An electrical controller is optimised to ensure the direction of rotation is always correct. This prevents the possible swapping of phases in varying electrical plug connectors. The punching process starts when the footswitch is pressed. Standard accessories: 5 punching units, 2 support brackets in front 500 mm, angle stop on the right, extending plate support table in front, 2 support brackets at the back, adjustable length stop Special accessories: jibed holes upon request Technical data RDE 5/ RDE 5/ Work width 1020 mm 1020 mm Max. plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm Max. hole diameter 10 mm 15 mm Supply voltage 400V (3LNPE) 400V (3LNPE) Motor rating 1.5 kw 1.5 kw Weight approx. 180 kg 230 kg Packaging dimensions approx. 135x80x115 cm 135x80x115 cm Item No

7 Hundt Cap Notching Machine KST (foot-operated / pneumatic / electrical) Fig.: KST-P (pneumatic) Fig.: KST-F (foot-operated) The cap notching machine is specially designed for the notching of corners on valve cap bottoms. This machine allows burr-free notching without deformation of the cutting edges in a single operation. Adjustable stops ensure quick and efficient work. Standard accessories for type KST-F: Collection container for cut-outs Standard accessories for type KST-P: Collection container for cut-outs, compressed air maintenance unit Standard accessories for type KST-E: Collection container for cut-outs, supply cable Special accessories: Replacement blades Technical data KST-F KST-P KST-E Cut length mm mm mm Max. plate thickness (steel 400N/mm 2 ) 1.5 mm 1.5 mm 1.5 mm Adjustable stops 0-40/0-30 mm 0-40/0-30 mm 0-40/0-30 mm Operating pressure / Mains connection voltage bar 400V (3LNPE) Weight approx. 40 kg 42 kg 55 kg Packaging dimensions approx mm mm mm Item No

8 Hundt Corner Notching Machine EST 50 (foot-operated / pneumatic) Fig.: EST50-F (foot-operated) The notching machine is used for the notching of sheet metal plates. This machine allows burr-free notching without deformation of the cutting edges in a single operation. Adjustable stops ensure quick and efficient work. Standard accessories for type EST50-F: Collection container for cut-outs Standard accessories for type EST50-P: Collection container for cut-outs, compressed air maintenance unit Standard accessories for type EST50-E: Collection container for cut-outs, supply cable Technical data EST50-F EST50-P EST50-E Cut length (single) mm mm mm Cut length (push-through process) mm mm mm Max. plate thickness (steel 400N/mm 2 ) 1.5 mm 1.5 mm 1.5 mm Adjustable stops 0-100/0-100 mm 0-100/0-100 mm 0-100/0-100 mm Operating pressure / Mains connection voltage bar 400V (3LNPE) Weight approx. 40 kg 42 kg 55 kg Packaging dimensions approx mm mm mm Item No

9 Hundt Roll Bending Machine RM (hand-operated) Fig.: RM 50/1000 Fig.: RM 55/1000 with forklift transportation This solid and light-weight machine is designed for manual roll bending of thin sheet metal. The three steel shafts have a tensile strength of 600 N/mm 2. The top shaft can be swivelled out to produce tightly rounded pipes. A folding groove allows the pre-bending of a single long fold. The parallel position of the bottom shaft can be adjusted via a cam lever. The rear shaft can also be adjusted both parallel and at a gradient with a hand wheel via a self-locking worm gear. The standard position indicator ensures a reproducible work result. The bottom and rear shafts are provided with annular grooves for bending sheets with a bead wire. Standard accessories: Drive crank, base frame Special accessories: Forklift transportation brackets, speed-reduction gear 1:4 with countershaft, which can be disengaged Technical data RM45/1000 RM50/1000 RM 55/1000 RM 65/1000 RM 65/1250 RM 65/1500 Effective length 1020 mm 1020 mm 1020 mm 1020 mm 1270 mm 1520 mm Shaft diameter 45 mm 50 mm 55 mm 65 mm 65 mm 65 mm Max. plate thickness (steel 400N/mm 2 ) 0.80 mm 1.00 mm 1.25 mm 1.50 mm 1.25 mm 1.00 mm Weight approx. 100 kg 115 kg 170 kg 240 kg 265 kg 290 kg Packaging dimensions approx cm cm cm cm cm cm Item No Other shaft diameters and work lengths on request. 10

10 Hundt Roll Bending Machine RME (electrical) Fig.: RME 65/1000 with forklift transportation brackets (left), Hundt spring-loaded finger guard (right) This roll bending machine is powered by a pole-changing gear brake motor. The top shaft can be swivelled out to produce tightly rounded pipes. A folding groove allows the pre-bending of a single long fold. The parallel position of the bottom shaft can be adjusted via a cam lever. The rear shaft can also be adjusted both parallel and at a gradient with a hand wheel via a self-locking worm gear. The standard position indicator ensures a reproducible product. The bottom and rear shafts are provided with annular grooves for bending sheets with a bead wire. The forklift transportation brackets and the electrical safety control system with emergency stop pull cord over the full work width in the foot area and 3-stage safety footswitch are also standard equipment. Standard accessories: Forklift transportation brackets, connecting cable, CEE-plug with phase inverter Special accessories: Hundt spring-loaded finger guard, tempered or rubberised rollers (without wire insert grooves). When the work sheet reverses, this shaft finger guard springs back without being bent or even destroyed. In particularly sensitive surfaces, it can be swivelled back completely if necessary and remains in this position. Afterwards, simply swivel back again. The spring-loaded finger guard then rests against the bending shaft. Technical data RME45/1000 RME50/1000 RME 55/1000 RME 65/1000 RME 65/1250 RME 65/1500 RME 70/1500 Effective length 1020 mm 1020 mm 1020 mm 1020 mm 1270 mm 1520 mm 1520 mm Shaft diameter 45 mm 50 mm 55 mm 65 mm 65 mm 65 mm 70 mm Max. plate thickness (steel 400N/mm 2 ) 1.0 mm 1.0 mm 1.25 mm 1.5 mm 1.25 mm 1.0 mm 1.25 mm Motor rating 0.3/0.45 kw 0.3/0.45 kw 0.75/1.1 kw 0.75/1.1 kw 0.75/1.1 kw 0.75/1.1 kw 0.75/1.1 kw Work speeds 7/14 7/14 7/14 7/14 7/14 7/14 7/14 Mains connection voltage 400V (3LNPE) 400V (3LNPE) 400V (3LNPE) 400V (3LNPE) 400V (3LNPE) 400V (3LNPE) 400V (3LNPE) Weight approx. 140 kg 150 kg 190 kg 240 kg 265 kg 290 kg 300 kg Packaging dimensions approx. 150x65x135 cm 160x75x135 cm 175x65x135 cm 175x65x135 cm 200x65x135 cm 225x65x135 cm 225x65x135 cm Item No Other shaft diameters and work lengths on request. 11

11 Hundt Cutter for Fitting Pieces SVE (electrical) Fig.: SVE Reliable and simple equipment for fast manufacturing of fitting pieces from insulating pipes. The shears can be adjusted continuously over the entire work length. Any required length can be cut. Removable feet for easy transport on construction sites. Standard accessories: Electric shears 220 V Special accessories: Replacement blades, attachment kit for S50XS or S50XE Technical data SVE Pipe length max mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm Measurement preselection mm Supply voltage 220 V Packaging dimensions approx cm Weight 30 kg Item No

12 Hundt Cutter for Fitting Pieces SVE + Hundt Beading Machine S50XS / S50XE Fig.: SVE+S50XS with attachment kit Fig.: SVE+S50XE with attachment kit Reliable and simple equipment for fast manufacturing of fitting pieces from insulating pipes. The shears can be adjusted continuously over the entire work length. Any required length can be cut. Removable feet for easy transport on construction sites. Electrical safety control system. Suitable for use on assembly sites. With attached hand-beading machine. Standard accessories: 220V electric shears, hand-beading machine S50XS or S50XE (motorised), attachment kit, 2 pairs of beading rollers V0, V1 Special accessories: More beading rollers, replacement blades for shears Technical data SVE - S50XS SVE + S50XE Pipe length max mm 1030 mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm Measurement preselection mm mm Supply voltage 220V 230 V/50Hz Centre to centre roller spacing 50 mm 50 mm Projection 60 mm 60 mm Fully variable work speed m/min. Weight 33 kg 41 kg Packaging dimensions approx. 110x45x25 cm 110x45x25 cm Item No

13 Hundt Beading Machine S50XS (hand-operated) Fig.: S50XS Particularly light and compact hand-beading machine for insulation work in transportation-friendly assembly version. Easy mounting on the frame or on the SVE Hundt cutter for fitting pieces. Steel housing. Tempered stop plate with new Hundt one-hand clamp. Axial adjustment of the bottom shaft with clamping. Tempered rollers. Standard accessories: Roller key, 2 pairs of rollers 1xV0, 1xV1 Special accessories: Pipe clamp Technical data S50XS Centre to centre roller spacing 50 mm Max. Plate thickness (steel 400N/mm 2 ) 1.0 mm Projection 60 mm Weight 8 kg Item No

14 Hundt Beading Machine S50XE (electrical) Fig.: S50XE Particularly lightweight and compact electric beading machine for insulation work with infinitely variable drive motor in transportation-friendly assembly version. Easy mounting on the frame or on the SVE Hundt cutter for fitting pieces. Steel housing. Tempered stop plate with new Hundt one-hand clamp. Axial adjustment of the bottom shaft with clamping. Tempered rollers. Standard accessories: Roller key, 2 pairs of rollers 1xV0, 1xV1 Special accessories: Pipe clamp Technical data S50XE Centre to centre roller spacing 50 mm Max. Plate thickness (steel 400N/mm 2 ) 1.0 mm Projection 60 mm Supply voltage 230V/50Hz Fully variable work speed 5-12 m/min. Weight 16 kg Item No

15 Hundt Beading, Flanging and Wire Insertion Machine SLH (hand operated) Fig.: S50LH, seat-base frame with roller bracket (left), standard rollers (right) The hand beading machine is designed as a sturdy and light-weight welded steel construction; axial adjustment of the bottom shaft. Stop plate with Hundt one-hand clamp. Easy to transport due to reduced weight. Standard accessories: 6 pairs of standard rollers, roller keys, large and hardened stop plate Special accessories: Rollers in many designs, table base frame, seat base frame, roller bracket, tail round stop Technical data S50LH Centre to centre roller spacing 50 mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm Largest working depth 180 mm Weight approx. 18 kg Packaging dimensions approx. 50x30x50 cm Item No

16 Hundt Beading, Flanging and Wire Insertion Machine SLF (electrical) Fig.: S50LF with running gear (left), insulation roller set (right) The electric beading machine is designed as a sturdy and light-weight welded steel construction; axial adjustment of the bottom shaft. Stop plate with Hundt one-hand clamp. Easy to transport due to reduced weight. Powered via frequency inverter with infinitely selectable operating speed within the specified range, connection 1x230 V. Standard accessories: 6 pairs of standard rollers, roller keys, large and hardened stop plate, connecting cable with plug connection, roller bracket Special accessories: Rollers in many designs, tail round stop, pipe support (adjustable height and diameter), running gear Technical data S50LF Centre to centre roller spacing 50 mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm Largest working depth 180 mm Motor rating 0.37 kw Work speeds 5-15 m/min Mains connection voltage 230V (1LNPE) Weight approx. 50 kg Packaging dimensions approx. 50x75x130 cm Item No

17 Hundt Beading, Flanging and Wire Insertion Machine SMH (hand operated) Fig.: S56MH, seat-base frame with roller bracket The hand beading machine is designed as a sturdy and light-weight welded steel construction; axial adjustment of the top shaft by means of a hand wheel, no additional clamping required. Stop plate with Hundt one-hand clamp. Easy to transport due to reduced weight. Standard accessories: 6 pairs of standard rollers, roller keys, large and hardened stop plate Special accessories: Rollers in many designs, table base frame, seat base frame, roller bracket, tail round stop Technical data S50MH S56MH Centre to centre roller spacing 50 mm 56 mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm Largest working depth 190 mm 230 mm Weight approx. 29 kg 30 kg Packaging dimensions approx. 70x30x50 cm 70x30x50 cm Item No

18 Hundt Beading, Flanging and Wire Insertion Machine SMF (electrical) Fig.: Fig.: S56MF with running gear (left), insulation roller set (right) The electric beading machine is designed as a sturdy and light-weight welded steel construction; axial adjustment of the top shaft by means of a hand wheel, no additional clamping required. Stop plate with Hundt one-hand clamp. Easy to transport due to reduced weight. Powered via frequency inverter with infinitely selectable operating speed within the specified range, connection 1x230 V. Standard accessories: roller keys, large and hardened stop plate, connecting cable with plug connection, roller bracket Special accessories: Rollers in many designs, tail round stop, pipe support (adjustable height and diameter), running gear Technical data S50MF S56MF Centre to centre roller spacing 50 mm 56 mm Max. Plate thickness (steel 400N/mm 2 ) 1.25 mm 1.25 mm Largest working depth 190 mm 230 mm Motor rating 1.1 kw 1.1 kw Work speeds 5-20 m/min 5-20 m/min Mains connection voltage 230V (1LNPE) 230V (1LNPE) Weight approx. 78 kg 80 kg Packaging dimensions approx. 50x75x135 cm 50x75x135 cm Item No

19 Hundt Beading, Flanging and Wire Insertion Machine SME (electrical) Fig.: SME56 (left), pressing fixture with finger guard (right) The machine body is a robust cast iron structure. Powered by a worm gear running in an oil bath. 4 operating speeds (2+2). Electrical safety control system with brake motor and emergency stop device, foot-operated reversing switch for clockwise-counter clockwise rotation, lockable operating mode selector switch for manual and automatic operation, power supply via CEE plug with phase inverter, axial adjustment of the top shaft through shifting the entire shaft bearing subassembly, large stop plate with tempered pre-screwing plate, stability through massive wooden floor plate. Standard accessories: Roller key Special accessories: Rollers in many designs, tail stop plate, pressing fixture with finger guard, connecting cable with CEE plug, pipe support (adjustable height and diameter), roller and stopper bracket Technical data SME56 SME80 Centre to centre roller spacing 56 mm 80 mm Max. Plate thickness (steel 400N/mm 2 ) 1.5 mm 2.0 mm Largest working depth 260 mm 310 mm Motor rating 1.3/1.7 kw 2.0/2.4 kw Work speeds 5/10 + 8/16 5/10 + 8/16 Mains connection voltage 400V (3LNPE) 400V (3LNPE) Weight approx. 120 kg 185 kg Packaging dimensions approx. 75x60x120 cm 75x60x150 cm Item No

20 Hundt Beading, Flanging and Wire Insertion Machine SMS (electrical) Fig.: SMS56 with roller bracket and insulation roller set (left), speed controller (right) The machine body is a robust cast iron structure. Powered by a worm gear running in an oil bath. Electrical safety control system with brake motor and emergency stop device, foot-operated reversing switch for clockwise-counter clockwise rotation, lockable operating mode selector switch for manual and automatic operation, power supply via CEE plug with phase inverter, axial adjustment of the top shaft through shifting the entire shaft bearing subassembly, large stop plate with tempered pre-screwing plate, stability through massive wooden floor plate. Standard accessories: Roller key, continuously variable operating speed Special accessories: Rollers in many designs, tail stop plate, pressing fixture with finger guard, connecting cable with CEE plug, roller and stopper bracket, pipe support (adjustable height and diameter) Technical data SMS56 SMS80 Centre to centre roller spacing 56 mm 80 mm Max. Plate thickness (steel 400N/mm 2 ) 1.5 mm 2.0 mm Largest working depth 260 mm 310 mm Motor rating 1.5 kw 2.2 kw Work speeds 5-25 m/min m/min. Mains connection voltage 400V (3LNPE) 400V (3LNPE) Weight approx. 130 kg 195 kg Packaging dimensions approx. 75x60x120 cm 75x60x150 cm Item No

21 Hundt Flanging Machine BM1 Fig.: BM1 This flanging machine is used specifically to produce 4 mm high flanges on insulation caps. The otherwise usual board height adjustment is eliminated, allowing work to be carried out quickly and efficiently. The folded board must only be fed into the machine and with the help of the limited guidance control it sets itself up in all the conventional curves and straight pieces. Technical data BM1 Board height (inside) 4 mm Max. Plate thickness (steel 400N/mm 2 ) 1.0 mm Smallest radius with/without limited guidance control 80/35 mm Motor rating 0.30/0.43 kw Work speeds 3/6 m/min. Mains connection voltage 400V (3LNPE) Packaging dimensions approx. 45x45x90 cm Weight approx. 70 kg Item No

22 Hundt Manual Plate Shears HTS 1.5 Fig.: HTS 1.5 (left) with cutter bar blocked (tright) These shears offer all the advantage much needed in construction work. Its low weight and integrated forklift transportation brackets make it easy to transport. The open sheet metal clamping also allows longer cuts by pushing the material through. There is a hand wheel on the operating side to adjust the stopper via gearwheels and rack-and-pinions. In the absence of an effective hold-down device, the optional Hundt cutter bar stop prevents the cutting process accidentally being set in motion. Standard accessories: Forklift transportation brackets for pallet truck and forklift Special accessories: Replacement blades, special blades for chrome steel, Hundt cutter bar stop to reduce the risk of an accident Technical data HTS 1.5 Effective length 1020 mm Max. Plate thickness (steel 400N/mm 2 ) 1.5 mm Adjustable width stop mm Weight approx. 260 kg Packaging dimensions approx. 180x95x85 cm Item No

23 Hundt Uncoiler TPA Fig.: TPA This sturdy welded steel construction in two sections offers several advantages: The runner frame is aligned with the shears and screwed firmly to the floor. The upright sheet metal coil can be picked up along with the uncoiler by using a sack barrow and both are placed together on the runner frame. The uncoiler can now shuttle back and forth on the runner frame, with the sheet metal coil automatically aligning with the scissors. Consequently, time-consuming, manual alignment is not necessary. Technical data TPA Load capacity 250 kg For coil width 1000 mm Weight approx. 45 kg Item No

24 Hundt Uncoiler PA with commuting rolls Fig.: PA1000 (left), PA1000 with castor wheels (top right), PA1000 with stop wheels (bottom right) Designed as a sturdy welded steel construction with commuting and ball-bearing rolls. Consequently, time-consuming, manual alignment is not necessary. Technical data PA1000 PA1250 PA1000 LR/BR PA1000 LR/LR Load capacity 1000 kg 500 kg 1000 kg 1000 kg For coil width 1000 mm 1250 mm 1000 mm 1000 mm castor wheels x 4 x stop wheels x --- Weight approx. 70 kg 80 kg 80 kg 80 kg Item No

25 Schechtl Hand-operated Folding Machine UKV Fig.: UKV 100 With its randomly combinable segments the UK range is a universal bending system for demanding sheet metal processing. Individual segments on top, bottom and bending beam: Combine, change and adjust in no time, without tools. With the patented quick-release system, the segments are merely inserted into the top, bottom and bending beam. Whether for roofing or facade construction, for bodywork and equipment manufacturing or for classic tinsmith handicraft: the UK range is a successful manufacturing partner. Foot pedal for hands-free operation, casters for mobility and angle stop for consistent bending angle in series production Standard accessories: Quick-clamping system, segments 30 / 40 / 50 / 60 / 70 / 100E left/ 100E right/6*100 (11*100, 16*100) Special accessories: Shears, special segments (window sill), depth stop, castors Technical data UKV 100 UKV 150 UKV 200 Work width 1000 mm 1500 mm Max. Plate thickness (steel 400N/mm 2 ) 2.0 mm 1.5 mm Weight approx. 400 kg 505 kg Packaging dimensions approx. 154x74x121 cm 204x74x121 cm Item No mm 1.0 mm 625 kg 254x74x121 cm

26 Wilhelm Hundt GmbH Schwabhausen Wuppertal Telefon: Fax: Internet: Online-Shop: 05/2018