Fully illustrated Parts Catalogue MGB to The MGOC range of original MG parts,mgb performance upgrades and optional accessories

Transcription

1 Thank you for loading the MGOC Spares & Accessories Compact Disc, featuring our unrivalled range of quality parts and accessories. We are sure that you will find this major club benefit valuable when ordering parts and maintaining your MG. This CD contains the following: Fully illustrated Parts Catalogue MGB to 1980 The MGOC range of original MG parts,mgb performance upgrades and optional accessories MGOC PRICE LOOK UP System. Look up by part number and create your order to , telephone, fax or post Usefull web links to Buy Online OUR SERVICE. We pride ourselves on offering the finest quality MG components available and continually strive to maintain our 5 Star level of service. Our MGOC technical telephone personnel are MG enthusiasts, best placed to assist with any question relating to our products. For full details of our terms & conditions of sale, warranty, returns exchanges and exchange deposits Click here. Sales & Ordering Tel: +44 (0) or +44 (0) Fax: +44 (0) or +44 (0) sales@mgocspares.co.uk 2007 MGOC Spares Ltd No part of this CD may be reproduced unless with prior written consent of MGOC Spares Ltd MGOC Spares & Accessories, Octagon House, Swavesey, Cambridge CB24 4QZ Continue 4 MGOC Spares & Accessories is a department of MG Owners Club MG trademark reproduced under BMH licence

2 ENGINE: ENGINE TOP ENGINE BOTTOM HEAD ASSEMBLY OIL FILTERS/COOLERS WATER PUMPS / FANS ENGINE ELECTRICS ENGINE MOUNTINGS ENGINE CONTROLS MGOC Spares & Accessories, Octagon House, Swavesey, Cambridge CB4 5QZ Tel: and sales@mgocspares.co.uk

3 Telephone: Fax: , sales@mgocspares.co.uk

4 1 48G343LF Engine - 3 BRG - L/F - Exch G343BE Engine - 3 BRG - Balanced G755LF Engine - C/B - 18G - Unleaded G755BE Engine - C/B Balanced G733LF Engine - B - C/B - 18G - Unleaded G733BE Engine - B - C/B - 18G - Balanced G733LF Engine - B - C/B - 18G - Unleaded BHM1111LF Engine - B - R/B - Unleaded BHM1111BE Engine - B - R/B - Balanced G500 Engine - B STG II - L/F Exch G510 Engine - B STD - L/F Exch G510BE Engine - B STD - Balanced - L/F G510U Engine - B USA - STD - L/F - Exch G520 Engine - B STG II - L/F - Exch G524 Engine - B 2.1 Hi-Torq - L/F - Exch...1 Note: G524 only - Block bored and crank stroked to achieve 2,100cc, crank nitrided, performance camshaft, vernier power pully, refaced flywheel, new ring gear, and clutch fitted. See notes below 1 G525 Engine - B STG II - L/F - Exch...1 Note: G525 only - The largest capacity MGB modified engine yet, to 2,100cc. Supplied complete with HS6 AUD505M Special Tuning carburettors and inlet manifold, together with a performance distributor, balanced refaced flywheel and clutch. See notes below. 2 GHF105 Screw - Backplate GHF333 Washer - Spring H1021 Lock tab GHF332 Washer - Spring H1020 Lock tab H1547 Retainer - Oil seal LUF10002 Oils seal - Crank - Rear K1779 Screw - Backplate SH Screw - Backplate K1810 Screw - Backplate GHF333 Washer - Spring K6059 Locktab H541 Blanking plug - Engine backplate H762 Gasket - Backplate - Upper H768 Gasket - Backplate - Lower H752 Backplate - Engine to gearbox H1469 Backplate - Engine to gearbox CAM1003 Backplate - Engine to gearbox H576 Drain tap K4954 Washer - Tap K8169 Welch plug - Dished AEH592 Welch plug - Cup K638 Washer - Plug K2853 Drain plug SH Screw GHF331 Washer - Spring A265 Blanking plate - Petrol pump A113 Gasket - Blanking plate H998 Con rod - 1 and 3 cylinder H997 Con rod - 2 and 4 cylinder GHF331 Washer - Spring K1774 Pinch bolt K881 Tab washer H1000 Bolt - Con rod H1019 Con rod - Circlip type piston K881 Tab Washer H1000 Bolt - Con rod H2444 Con rod - Circlip type piston H5872 Nut G1300 Bolt - Con rod CAM1588 Con rod - Push fit type piston H5872 Nut G1300 Bolt - Con rod H961 Piston - Set of 4 - Pinch bolt type H2521 Piston - Set of 4 - Circlip type H5161 Piston - Set of 4 - Push fit type G2506 Pistons rings - Engine set - 4 ring type...1 BHM1183 Pistons rings - Engine set - 3 ring type H156 Cover - Tappet chest - Front A1139 Gasket - Tappet chest - Vain thick A1175 Gasket - Tappet chest - 1/4 in thick BH Bolt A1177 Washer - Cup A1176 Bush - Rubber A1386 Cover - Tappet chest Rear G002C K & N Breather - Chrome top...1 G002 K & N Breather - Black top H730 Gear - Tacho drive WKN304 Woodruff key - Tacho drive SF Screw - Housing G2285 Housing G4499 Spindle - Distributor G303 Camshaft G303E Camshaft - Reground...1 G028 Cam Kit - Mild - 3 BRG - Exch...1 G029 Cam Kit - Fast - 3 BRG - Exch Main bearing (18G/GA) 3 Main bearing (18G/GA) 5 Main bearing (18GB/GD/GG) Not 18v 5 Main bearing (18GB/GD/GG) Not 18v Chrome bumper car with 18v engine Chrome bumper car with 18v engine Rubber bumper car with 18v engine Rubber bumper car with 18v engine State year and model Full range of MGB V8 engines available, please ring for details. Please note our V8 conversion CD Rom is also available. 5 Bearing engines only 5 Bearing engines only 18G/GA/GD/GG/18V to September 1976 September 1976 on All engines, except 18GB 18G/GA (3 main bearing) 18GB (5 main bearing, 3 sync gearbox) 18GD/GG/18V (4 sync and Auto) 18G/GA (3 main bearing) 18G/GA (3 main bearing) Fits 12H997, 2H998, 12H1109 conrods 18GB/GD/ Early GG Fits 12H997, 2H998, 12H1109 conrods Late 18 GG Fits 12H2444 and Cam1588 conrods 18V only Fits 12H2444 and Cam1588 conrods 18G/GA (3 main bearing) 18GB/GD/GG (5 main bearing) 18V Fits 12H961 and 12H2521 Pistons Fits 12H5161 Pistons All 5 main bearing engines All 5 main bearing engines N.B All standard engines are supplied less ancillaries (Flywheel, starter motor, distributor, manifolds etc) This does not apply to balanced engines that include backplate and flywheel only. A clutch can also be fitted at extra cost. State size required STD/ +20 / + 30 / + 40/ + 60

5 G030 Cam Kit - Mild G031 Cam Kit - Fast G040 Cam Kit - Mild on - Exch...1 G041 Cam Kit - Fast on...1 G043 Camshaft Sports - Fast Road...1 G044 Camshaft Supersports - Rally H3357 Pushrod A13 Cam follower G241 Pushrod H3167 Cam follower BHM1212 Bearing set - Camshaft H1576 Gasket - Mounting plate H1387 Mounting plate - Engine - C/B GHF332 Washer - Spring GHF120 Screw H673 Thrust plate - Camshaft GHF321 Washer - Shakeproof GHF117 Screw GHF332 Washer - Spring GHF120 Screw H3292 Tensioner assembly - Timing chain GHF102 Bolt AEC340 Locktab H2127 Timing chain - Simplex WKN505 Woodruff key - Camshaft CAM5333 Gear - Camshaft A759 Lock tab - Camshaft K629 Nut - Camshaft G203 Gear - Camshaft H4905 Timing chain - Duplex G047 Duplex Vernier Timing Gear H1319 Gasket - Timing cover H3317 Timing cover H3510 Timing cover CAM1393 Timing cover GHF117 Screw - Timing cover to bearing cap SH Screw - Timing cover to plate K5197 Washer - Oval GHF300 Washer - Plain GHF120 Screw - Timing cover to engine GHF332 Washer - Spring K7440 Washer - Oval G561 Oil seal - cover...1 All 18V engines All 18V engines All 18G + engines All 18G + engines 18V 583 H546 on Use prior to 11G203 and 2H4905 Note G524/G525 only: Please note that we advise you to fit a mechanical cooling fan to aid under bonnet cooling. (NB If a mechanical fan is not fitted, the engine s warranty will be affected). Therefore if the car does not already have a mechanical fan bolted to the water pump pulley, a plastic fan 12H4744 must be purchased. This fan fits cars For cars after 1976 this same fan may be fitted but the plastic blades should be shortened by approximately 1 inch, to clear the top rubber hose or , sales@mgocspares.co.uk

6 Telephone: Fax: ,

7 88 BHM1155 Crankshaft assembly - New G765 Spigot bush H1416 Spigot bush B1397 Spigot bush H1301 Dowel - Crankshaft H326 Woodruff key - Crankshaft H4301 Woodruff key - Crankshaft K6633 Shim - Packing A/R 93 12A1553 Gear - Crankshaft - Duplex H775 Oil thrower H1740 Oil thrower H773 Pulley - Crankshaft H963 Pulley - Crankshaft (vibration damper type) H3515 Pulley - Crankshaft (vibration 12H3516 damper type) Pulley - Crankshaft (vibration damper type) A398 Lock washer - Crank pulley AEA312 Bolt - Crank pulley H4201 Gear - Crankshaft - Simplex H1368 Cork seal - Main bearing cap / H1476 Cork seal - Main bearing cap / B2356 Bolt - Main bearing cap K1482 Stud - Main bearing cap / ACA55521 Washer / LNN208 Nut / G2389 Bearing Set - Main BHM1295 Thrust washer set G2207 Bearing set - Big end G2664 Bearing set - Big end H713E Flywheel + R/G - 3 sync - 3 BRG H1474E Flywheel + R/G - 3 sync - 5 BRG H2184E Flywheel + R/G - 4 sync G2874 Ring gear H2186 Ring gear - Pre-eng H2275 Drive plate H2187 Ring gear SH Screw H2194 Locktab H45 Screw H537 Locktab H219 Adaptor - Crankshaft to Driveplate H2192 Backplate - Driveplate to Locktab K1022 Bolt - Crank to flywheel FNZ506 Nut - Flywheel K26 Lock washer - Flywheel K1809 Bolt - Flywheel H1303 Locktab - Flywheel G2984 Dowel - Clutch cover CAM1039 Spindle - Oil pump drive G420 Gasket - Pump to block - 3 BRG H1018 Gasket - Pump to block - 5 BRG G296 Oil pump - 3 BRG GLP143 Oil pump - 5 BRG G421 Gasket - Pump to strainer JAM2227 Strainer - Oil K267 Stud - Oil pump GHF301 Washer GHF332 Washer - Spring GHF201 Nut SH Screw /1 124 SH Screw GHF331 Washer - Spring A1851 Cap - Oil release valve K431 Washer - Oil release cap H756 Spring - Oil release valve AEH798 Packing, piece H865 Valve - Oil pressure relief H395 Sump H3541 Sump GEG503 Gasket - Sump GEG504 Gasket - Sump SH Screw / GHF321 Washer - Shakeproof / GHF300 Washer - Plain G257 Drain plug - Sump K638 Washer - Drain plug A030 Engine Paint - Black A/R A031 Engine Paint - MG Red A/R H H2964 Tube - Dipstick Dipstick B1063 Tube - Dipstick B1735 Gaiter - Dipstick H74 Dipstick H3963 Dipstick K039 Dipstick - Alloy - 18v on All 5 main bearing engines 18G, GA (3 main bearing engines) Manual Automatic Very early 18G only Later 18G/18GA, GB, GD, early 18GG Use with timing cover 12H3317 Later 18GG, Chrome bumper 18V - Use with timing cover 12H3510 Rubber bumper 18V - Use with timing cover CAM1393 Front/rear for 18G, GA. Front only for 18GB, GD, GG. Front/rear for 18V. Rear only for 18GB, GD, GG. 3 bearing engines 5 bearing engines 5 main bearing engines State size required: Std/ G, GA (3 main bearing) 5 main bearing engines 18G, GA (3 main bearing) 18GB (5 main bearing - Inertia starter motor) 18GD, GG, 18V on (5 main bearing - Pre-engaged starter motor) Use on 12H713 and 12H1474 (Inertia starter motor) Use on 12H2184 (Pre-engaged starter motor) For 12H2964 and 12H GG, 18V 581/ 582/ 583 to G, GA, GB, GD 18V 581/ 582/ on, 18V 779, 780, 846, 847 Telephone: or , sales@mgocspares.co.uk

8 Telephone: Fax: , sales@mgocspares.co.uk

9 1 K042 Alloy rocker cover K048 Alloy rocker cover - Fit kit H1838 Rocker cover (with breather) A402 Oil filler cap (non vented) GFE6003 Oil filler cap (vented) - Black GFE6007 Oil filler cap (vented) - Red K045 Chrome Rocker cap A150 Nut CAM6823 Nut - Chrome plated K046 Nut - Knurled - PR H2557 Nut with stud B2925 Spacer CAM6823 Nut - Chrome plated A2156 Cup washer G679 Cup washer - Chrome plated A1358 Bush - Rocker cover GUG33VC Gasket - Rocker cover MRS1E Rocker assembly - In Line - Exch MRS2E Rocker Assembly - Offset - Exch G050H Roller Rockers In Line G050S Roller Rockers In Line G051H Roller Rockers Offset G051S Roller Rockers H3377 Rocker arm G2295 Bush - Rocker arm H3376 Adjusting screw - Rocker arm K1178 Lock nut A2139 Washer- Double coil - Rocker shaft K6804 Washer- Plain - Rocker shaft G62 Rocker shaft G62T Rocker shaft - Tufftrided H390 Pillar - Rocker shaft - Plain K871 Spring - Rocker spacing H389 Pillar - Centre oil feed to H4737 Pillar - Off centre oil feed on A258 Grub screw - Locating A259 Lock plate - Grub screw K881 Stud - Short - Rocker shaft K893 Stud - Long - Rocker shaft GHF301 Washer - Plain GHF332 Washer - Spring GHF201 Nut H3960 Shim - Centre pillars K281 Stud - Cylinder head - Long K282 Stud - Cylinder head - Short H2178 Washer - Cylinder head K1193 Nut - Cylinder head G318LF Cylinder head assembly- Reconditioned H2708LF Cylinder head assembly - Reconditioned H2709LF Cylinder Head - C/B - 18V - New H4735LF Cylinder head assembly - Reconditioned H4736LF Cylinder Head - R/B - 18V - New G576 Cylinder head - STG II - L/F - New B1339 Valve guide - Exhaust H2222 Valve guide - Inlet H435 Inlet valve ins H436 Exhaust valve ins H4211 Inlet valve ins H2520 Inlet valve ins CAM1717 Exhaust valve ins H1321 Seat - Valve spring H1679 Valve spring - Outer H176 Valve spring - Inner H992 Valve cap H3309 Valve cap H3354 Seat - Valve spring H3352 Valve spring H3353 Valve cap K800 Cotter AHU1709 Cotter AEK113 Valve packing B2104 Valve stem seal AJM1163 Head gasket set AJM377 Gasket - Head FHS2513 Stud - Manifold to head - Outer FHS2515 Stud - Manifold to head - Inner FHS2513 Stud - Manifold to head GUG4013MG Gasket - Manifold CAM1569B Gasket - Manifold - USA GTS102 Thermostat - 74 degrees C - Hot GTS104 Thermostat - 82 degrees C - STD GTS106 Thermostat - 88 degrees C - Cold GTG101 Gasket -Thermostat GA on 18GA on Use with K042 18G, GA, GB 18G, GA, GB Alternative to 2A150, See also K048 In Line and Offset Rocker Feeds: (Items only) The two types of 18V cylinder head are identified by the position of the oil feed hole under the fourth rocker pedestal. Earlier 18V heads had a hole in line with the two studs securing the pedestal; later heads had an offset hole. While the modification is assumed to have taken place around the time of the introduction of the rubber bumper cars, factory rebuilt 18V engines (whether chrome or rubber bumper type) are supplied with either head and there is no documented engine number change point between the two. See diagram. 18G (-) series - Small inlet, double valve springs 18V581/582/583/779/780 engines - Large inlet (Chrome bumpers) 18V846/847 on engines - Small inlet, offset oil feed (Rubber bumpers) Slot type cotter groove. Fitted to 18G, GA, GB, early 18GD engines Late 18GD, 18GG (Chrome bumper) Also 18V 846/847 (All rubber bumper) 18V 581/582/583/779/780 (Chrome bumper) Late 18GD, 18GG, 18V Slot type cotter groove Circular cotter groove Slot type cotter groove Circular cotter groove Circular cotter groove Double valve springs 18G (-) series Single valve springs 18V series 18G (-) series. (Thick flange manifolds) 18V series. (Thin flange manifolds) Telephone: or , sales@mgocspares.co.uk

10 Telephone: fax: ,

11 46 CHS2515 Stud - Thermostat GHF301 Washer - Plain GHF201 Nut H797 Thermostat cover H2556 Thermostat cover CAM1577 Thermostat cover TRS1418 O Ring - Rubber A4205 O Ring - Cork KTP9401 Filler cap - Brass ARA2634 Filler cap - Plastic JAM2036 Gasket - Water pump GWP115 Water pump SH Screw - Short BH Bolt - Long GWP114 Water pump SH Screw - Short BH Bolt - Long GWP130 Water pump GHF103 Screw - Short BH Bolt - Long GHF332 Washer - Spring B174 Pulley - Water pump H3696 Pulley - Water pump CHM56 Pulley - Water pump H3910 Spacer - Fan to pulley H1058 Fan - 3 blade metal H1062 Distance tube - Fan H1060 Grommet - Fan blade H1388 Locktab PWZ204 Washer - Plain GHF101 Screw - Fan blade SH Screw - Fan blade H4744 Fan - 7 blade plastic GHF331 Washer - Spring GHF117 Screw - Fan blade CAM1599 Clamping ring GHF331 Washer - Spring GHF117 Screw - Pulley GFB10900 Fan belt - CB - Up to GFB10950 Fan belt - RB - From G110 Kenlowe Fan Kit - up to G116 Kenlowe Fan Kit to G113 Kenlowe Fan Kit on G, GA, GB. Radiator with rear filler 18GD to Sep Radiator with centre filler September 1976 on (Electric fans) Use with ARA2634 Use with KTP9401 Alternatives Alternatives 18G, GA (3 Main bearing) 18G, GA (3 Main bearing) 18G, GA (3 Main bearing) 18GB, GD, GG (5 Main bearing) 18G (-) series (No spacer fitted) 18V series (Fan spacer fitted) September 1976 on (Electric fans) 18V engines. GWP130 supercedes GWP117 (fitted to C/B cars) which used 2 x SH (Screw - Short) and 2 X BH (Bolt - Long) -replace these as well when changing pump 18G (-) series engines 18V 581/582/583/779/780 (Chrome bumper cars) 18V 846/847 (Rubber bumper cars) 18V engines with 3 blade metal fan All cars to GHN and GHD GHN and GHD Sept 1976 on (Electrical fan fitted) or , sales@mgocspares.co.uk

12 Telephone: Fax: ,

13 17 8G619 Sealing ring - To block AHH6701 Union -Adaptor - Filter Housing K431 Washer - Union GFE102 Oil filter - Paper element G127 Oil filter - Spin on conversion H1556 Sealing ring - Bolt to cannister G619 Sealing ring - Cannister to adaptor H1965 Bolt - Centre H1764 Spring H1969 Washer - Steel H1968 Washer - Felt H846 Pressure Plate H1952 Circlip H998 Sealing ring - Cannister to adaptor H4505 Bolt - Centre H4506 Washer - Seal H1764 Spring H1765 Washer - Steel H1758 Washer - Felt H942 Pressure - Plate H2877 Circlip H998 Sealing ring - Cannister to adapter K2853 Drain plug K638 Washer - Drain plug BH Bolt - Adaptor to block H693 Washer GFE121 Oil filter - Cannister GFE121F Oil filter - Fram H3273 Housing - Oil filter GFE148 Oil filter - Cannister H4405 Housing - Oil filter /2900 Castrol - XL20W/50-25 ltr drum Castrol - XL 20W/50-5 ltr...1 Purolater hanging filter Purolater hanging filter Tecalemit hanging filter Tecalemit upright filter Tacalemit upright filter and disposable cannister types Upright disposable type Hanging disposable type or , sales@mgocspares.co.uk

14 Telephone: Fax: , sales@mgocspares.co.uk

15 1 ARA221 Oil cooler - 13 row ARO9807 Oil Cooler - 10 row ARO9875 Oil Cooler - 16 row GHF117 Screw GHF331 Washer - Spring GHF300 Washer - Plain AHH8192 Oil cooler pipe AHH8536 Oil cooler pipe - To filter AHH8537 Oil cooler pipe - To block - C/B BHH1610 Oil cooler pipe - R/B BHH1809 Oil bypass pipe - filter to block H922 Union - Adaptor - Block K501 Washer - Union AHA8401 Grommet - Oil pipe /1 9 AHH6865 Strap - Rubber /2 10 AHH6866 Clamp plate - Rubber strap /4 11 PMZ312 Screw /2 12 WL Washer - Spring /2 13 GHF206 Nut - Plain /2 14 G180 Oil Cooler kit - up to G181 Oil Cooler kit to G182 Oil Cooler kit - Rubber on G205 Oil Cooler kit - S/steel - up to G206 Oil Cooler kit - S/steel to G207 Oil Cooler kit - S/steel on G125 Oil Cooler Thermostat Chrome bumper cars Rubber bumper cars For tuned engines or very hot climates Oil cooler fixing - All models GHN3, GHD3 (3 sync gearbox) GHN4/5, GHD4/5 (4 sync gearbox) Used when oil cooler is not fitted Quantity reduced for 4 sync cars Helps avoid overcooling of engine oil in cold weather Note: It is necessary to cut the oil cooler pipes to fit the thermostat Note: Oil cooler pipes available with stainless steel braiding by adding an S to the part number, eg AHH8192S or , sales@mgocspares.co.uk

16 Telephone: Fax: ,

17 64 G283 Coil - Lumetion - Magnetronic - MS3 - Blue 1 G284 Coil - Lumetion - Optronic - MS4 - Silver GCL105 Lucas - Sports coil - C/B only GCL101 Coil - Screw HT lead Nut - HT lead to coil GCL110 Coil - Push in HT lead GCL111 Coil - Ballast type SH Screw PWZ204 Washer GHF331 Washer - Spring GHF200 Nut GHF331 Washer - Spring PWZ204 Washer G727 Cover - Ignition coil K019 Cover - Ignition coil - S/steel G078 Luminetion - High performance kit G273 Lumenition - Magnetronic - C/B G277 Lumention - Magnetronic - R/B G094 Lumention - Ignition management G070/2 Lumention - Optronic - 25D G070/3 Lumention - Optronic - 45D G07C Lumention - Optronic fitting bracket G285 Superchips - Icon - Optronic G286 Superchips - Icon - Magnetronic BP6EV Spark plug - NGK platinum GSP4362 Spark plug - Standard G085 Lumenition - Ignition lead set - 25D T/E G086 Lumenition - Ignition lead set - 45D T/E G105 Silicone - Ignition leads - set GHT102 HT lead kit - Side entry GHT106 HT lead kit - Top entry GHT184 HT lead kit - 45D G2673 Spacer - 4 way H35 Ring - Rubber Negative earth cars only Not suitable for replacing ballast type 18G, GA, GB. Note: May have been converted to push-in type coil 18GD, GG, Chrome bumper 18V Rubber bumper. Positive Earth vehicles contact for special installation notes. Positive Earth vehicles contact for special installation notes. 25D side entry (18G, GA, GB) 25D top entry (18GD, GG, chrome bumper 18V) 45D distributors 18G, GA, GB 4 sync cars fitted with 25D dist or , sales@mgocspares.co.uk

18 Telephone: Fax: ,

19 89 GED115SR Performance Distributor - 43D4 - Exch B2062 Pipe connector B2095 Pipe connector - Straight G726 Cover - Distributor cap GDC102 Distributor cap - Side entry Vacuum unit RTC1425 Vacuum unit H4299M Vacuum pipe - Plastic H7333 Vacuum pipe - Metal GDC103 Distributor cap - Top entry CBS101 Screw - Contact breaker GCS2101 Contact set GCS2111 Contact set GSC2111 Condenser GRA101 Rotor arm H2981 Low tension lead GED105E Distributor - Exch - 25D- CB - OE GED110E Distributor - Exch - 45D- RB - OE BY1 Distributor - 45d type - CB GHF117 Screw GHF331 Washer - Spring GHF300 Washer O ring - Distributor seal Clamp - Distributor GDC136 Distributor cap GRA114 Rotor arm GCS2118 Contact set - Standard points - 45D/43D GCS2124 Contact set - Sliding points - 45/D/43D GSC2109 Condenser AAU2233 Vacuum unit BY1001 Vacuum unit BY2002 Vacuum unit BY4004 Vacuum unit G (-) high comp, 18V581/582/583 18G (-) low comp, 18V779/780 sold in metre lengths Use plastic pipe if not available. Note: Replacement vacuum units are push fit and will not fit 12H733. Standard points fitted to all original 45D types Suit original 45D type 25D type distributors fitted originally to chrome bumper cars 45D type distributors originally fitted to rubber bumper cars or , sales@mgocspares.co.uk

20 Telephone: Fax: , sales@mgocspares.co.uk

21 1 GXE4418E Starter motor - Inertia - Reconditioned GSB103 Brush kit - M418 G K149 Bolt - Starter motor GHF333 Washer - Spring WKN505 Woodruff key - Drive assembly H7818 Main spring H4289 Pinion drive assembly H6940 Pinion BCA4501 Solenoid - Starter motor H5952 Solenoid - Starter motor PMZ308 Screw WL Washer - Spring GHF306 Washer GXE4441GRE Starter motor - Pre - engaged - Recon to GXE4441VRE Starter motor - Pre - engaged - Recon on BHH790 Starter motor - Cover BH Bolt - Starter motor - Top GHF105 Bolt - Starter motor - Bottom GHF333 Washer - Spring GSB103 Brush kit - M418 G Solenoid GXE4418X Starter motor - Inertia - High geared - up to GXE4441X Starter motor - Pre Eng on - Hi-geared GXE4441 Starter motor- Pre Eng - New on GXE3101E Dynamo - Exch GXE3101RE Dynamo - Exch D11 Fan - Dynamo H1178 Pulley GGB102 Brush kit - Dynamo A526 Bracket - Dynamo H2517 Bracket - Alternator GHF120 Screw GHF332 Washer - Spring BH Bolt - Rear bracket GHF104 Bolt - Rear bracket GHF301 Washer GHF201 Nut GHF222 Nut - Self locking GHF332 Washer - Spring C37222 Fan - Alternator G1054 Pulley - Alternator BAU1461 Pulley - Alternator BH Bolt GHF301 Washer GHF332 Washer - Spring GHF201 Nut GHF222 Nut - Self locking A128 Pillar - Adjusting GHF202 Nut GHF333 Washer - Spring A497 Adjusting link G2627 Adjusting link SH Screw GHF333 Washer - Spring GHF202 Nut GHF223 Nut - Self locking GHF302 Washer SH Screw - UNC SH Screw - Metric GHF332 Washer - Spring GHF301 Washer GEU216 Alternator - Hi-Output - New - CB GEU216E Alternator - Reconditioned GEU216RE Alternator - Reconditioned GEU213E Alternator - Reconditioned GEU213RE Alternator - Reconditioned GEU206 Alternator - Hi-Output - New - RB GEU206E Alternator - Reconditioned GEU206RE Alternator - Reconditioned GGB504 Brush kit H2245RE Alternator - Reconditioned GEU6605 Regulator - Dynamo - RB H2910 Nut - Plastic AB Screw BHA4789 Regulator - 4TR CHM68 Relay - Plastic can A/R 55 PMZ308 Screw A/R GHF425 Screw A/R 56 WL Washer - Spring A/R M418G or 2M100 If NLA use 13H5952 M418G or 2M100 M418G pre-engaged. Originally fitted to 18GD, GG engines. E indicates O.E or Lucas reconditioned. R indicates QH reconditioned. 18G, GA, GB 18GD, GG, 18V Bracket to engine block Bracket to engine block Dynamo Alternator Alternatives Alternatives AC and ACR alternators Use prior to BAU1461 September 1976 on Alternatives Alternatives Regulator to inner wing. GHN3, GHD3 (3 syncromesh) cars 4 syncromesh Dynamo and alternator to September 1976 September 1976 on Dynamo to link Alternator to link 16, 17 ACR - European termination - Increased output 65 amp 16, 17 ACR - European termination 16, 17 ACR - European termination 18 ACR - BSH termination (early r/b) 18 ACR - BSH termination (early r/b) 18 ACR - European termination (late r/b) 18 ACR - Euro termination (late r/b) 18 ACR - Euro termination (late r/b) 16, 17, 18 ACR Note: 16 AC alternators were originally fitted to GHN4, GHD4 cars with 18GD engines. This finished at chassis no after which a 16 ACR alternator, with British Standard termination, was fitted. The British Standard termination is obsolete and the wiring will have to be converted to European termination to match the replacement alternator. A special kit (GEU250) is available which contains the necessary wiring connectors and moulded plug. This kit can also be used to convert the 16AC alternator to accept ACR alternators (a photocopy of the conversion details is available on request, this also covers converting from a dynamo to an alternator. The kit also enables the fitment of the 18 ACR (European) in place of the 18 ACR (BSH). 16AC Starter motor (GHN , GHD , GD2D on). Ignition circuits September 1976 on. CHM68 can also replace relay if desired

22 13H2910 Nut - Plastic A/R 57 AHH6751 Spacer PMZ310 Screw WL Washer - Spring GHF306 Washer H2910 Nut - Plastic GHF423 Screw GHF306 Washer PMZ308 Screw /4 WL Washer - Spring /4 GHF306 Washer / Relay - Metal can a/r Fusebox - 2 fuse type Cover - Fusebox PMZ312 Screw WL Washer - Spring H4727 Fusebox - 4 fuse type H4727P Cover - Fusebox H2910 Nut - Plastic AB Screw PMZ316 Screw WL Washer - Spring H3588 Fuse holder - In line A/R 63 GFS3010S Fuse - 10 amp a/r 63 GFS3015 Fuse - 15 amp a/r 63 GFS30120 Fuse - 20 amp a/r 63 GFS3035 Fuse - 35 amp A/R Overdrive relay to bulkhead - GHN3, GHD3 only Starter relay to inner wing Rubber bumper 1800 with metal can relay. Overdrive (3 synchro), starter motor (4 synchro 1800 to GHN , GHD GHN3/4, GHD3/4 cars GHN5, GHD5 Chrome bumper Rubber bumper 1800 GHN , GHD on. Not V8 Rubber bumper 1800 to GHN , GHD or , sales@mgocspares.co.uk

23 Telephone: Fax: , sales@mgocspares.co.uk

24 1 AEC2075 Spring - Carburettor return WZX1568 Lever kit H715 Lever - Accelerator ACC5062K Pin assembly - Accelerator GHF301 Washer - Plain ACA5256 Washer - Anti rattle GHF502 Split pin SH Screw GHF332 Washer - Spring PWZ205 Washer SH Screw PWZ204 Washer GHF331 Washer - Spring GHF200 Nut K3503 Screw BHH558 Bracket - Choke and accelerator cables BHH1676 Bracket - Choke and accelerator cables AUE496 Lever - Pick up - Accelerator - Front BHH631 Lever - Accelerator AUE685 Lever - Pick up - Accelerator - Rear BHA5357K Pin and clip assembly - R/B PWZ203 Washer - R/B AUE587 Lever - Pick up - Choke - Rear BHH633 Lever - Choke AUE586 Lever - Pick up - Choke - Front AUE34 Pin - Choke cable - R/B AEC2075 Spring - Carburettor return BHH657 Abutment - Choke cable AJD7712 Washer - Double coil GHF306 Washer GHF502 Split pin AHH6734 Abutment - Choke cable AJD7712 Washer - Double coil AAA 649 Tab washer - Return spring GHF500 Split pin AHH6725 Choke cable BHH653 Cable - Choke BHH2064 Cable - Choke RFR303 Grommet - Choke cable RFR403 Grommet - Choke cable PMZ308 Screw PCR307 Clip GHF306 Washer WL Washer - Spring GHF206 Nut AHH8462 Cable - Accelerator - C/B BHH1648 Cable - Accelerator - R/B AHH8747 Cable - Accelerator - Auto AHC284 Pin - Accelerator cable ACA5703 Seal - Guide AHH5308 Guide - Accelerator cable WL Washer - Spring PMZ308 Screw BH Bolt GHF332 Washer - Spring AHH6504 Tube - Distance SH Screw GHF200 Nut AHB7162 Pedal stop GHF331 Washer - Spring SE Screw AHH6497 Pedal - Accelerator GPR105 Pedal - Rubber AHC135 Pedal - Accelerator BHH1692 Pedal - Accelerator AHH5100 Pedal rubber BHH1971 Pedal - Accelerator Also used on chrome bumper cars fitted with HIF4 carburettors Chrome bumper cars Chrome bumper cars - not automatic Rubber bumper cars Automatic cars Automatic cars Pedal return stop Pedal return stop GHN3, GHD3 (3 syncromesh) cars GHN3, GHD3 (3 syncromesh) cars Chrome bumper syncromesh Rubber bumper 1800 until Sept 1976 Not fitted as O.E but good modification September 1976 on or , sales@mgocspares.co.uk

25 Telephone: Fax: , sales@mgocspares.co.uk

26 1 BHH1351 Engine mounting - RH BHH1352 Engine mounting - LH AHH6992 Packing plate a/r 3 GHF120 Screw GHF332 Washer - Spring GHF201 Nut GHF201 Nut GHF332 Washer - Spring AHH5065 Mounting bracket - RH AHH5066 Mounting bracket - LH GHF103 Screw SF Screw - Countersunk GHF272 Nut - Locking GHF332 Washer - Spring SH Screw GHF333 Washer - Spring AHH7890 Bracket - Engine surge /1 16 BHH640 Bracket - Engine surge - LH Note: These engine surge brackets are not fitted to 3 syncro roadster 17 BHH1621 Engine mounting BHH1528 Packing plate a/r 19 GHF202 Nut GHF333 Washer - Spring GHF120 Screw GHF201 Nut GHF332 Washer - Spring BHH1619 Engine mounting - RH BHH1620 Engine mounting - LH SH Screw GHF201 Nut GHF332 Washer - Spring SH Screw GHF333 Washer - Spring SH Screw GHF333 Washer - Spring AHH6134 Crossmember - Gearbox mounting GEX7453 Mounting - Gearbox SH Screw GHF332 Washer - Spring GHF201 Nut GHF332 Washer - Spring GHF301 Washer - Plain G9384 Pin - Steady rod B8347 Bush - Gearbox steady GHF202 Nut GHF333 Washer - Spring AHH6056 Steady rod GHF202 Nut GHF333 Washer - Spring G8775 Spacer tube AHH6298 Bracket - Gearbox steady rod SH Screw GHF331 Washer - Spring G8781 Steady buffer G8782 Plate - Steady buffer GEX7422 Mounting - Gearbox SH Screw GHF332 Washer - Spring GHF201 Nut GHF332 Washer - Spring GHF301 Washer - Plain AHH7853 Bracket - Steady - Lower GHF120 Screw GHF332 Washer - Spring AHH7852 Bracket - Steady - Upper AHH7855 Steady pin AHH7854 Steady bush GHF201 Nut GHF332 Washer - Spring GHF315 Washer - Plain AHH8432 Bracket - Steady - Lower GHF120 Screw GHF332 Washer - Spring AHH8431 Bracket - Steady - Upper AHH7855 Steady pin AHH7854 Steady bush GHF201 Nut GHF332 Washer - Spring GHF315 Washer - Plain GEX7453 Mounting - Gearbox SH Screw GHF332 Washer - Spring GHF201 Nut GHF332 Washer - Spring GHF301 Washer - Plain AHH8430 Crossmember - Gearbox mounting BHH1543 Corssmember - Gearbox mounting BHH1542 Bracket - Engine steady rod SH Screw GHF301 Washer - Plain Start with one on the LH side Engine mountin to body Engine mounting to mounting bracket Mounting bracket to front engine plate Mounting bracket to front engine plate Mounting bracket to engine block Mounting bracket to engine block GHN3, GHD3 (3 syncromesh) cars Mounting to gearbox Mounting to crossmember Bracket to crossmember Bracket to crossmember Mounting to gearbox Mounting to gearbox Mounting to crossmember Lower bracket to crossmember Lower bracket to crossmember Mounting to gearbox Mounting to gearbox Mounting to crossmember Chrome bumper 4 syncromesh cars Rubber bumper 4 syncromesh cars Also mounting for exhaust Chrome bumper Rubber bumper GHN3 cars (3 sync roadster) GHD3 cars (3 sync GT) All 4 syncromesh cars Rubber bumper 4 syncromesh cars

27 87 GHF222 Nut - Locking BHH1540 Steady rod GHF202 Nut GHF302 Washer - Plain G8775 Spacer tube G8781 Steady buffer G8782 Plate - Steady buffer GHF333 Washer - Spring Chrome bumper 4 syncromesh cars Rubber bumper 4 syncromesh cars Rubber bumper 4 syncromesh cars or , sales@mgocspares.co.uk

28 FUEL SYSTEM: CARBURETTORS AIR FILTERS / FUEL LINE PETROL TANKS / FILLER CAP FUEL PUMPS REGULATORS FUEL LINES / HOSES MGOC Spares & Accessories, Octagon House, Swavesey, Cambridge CB4 5QZ Tel: and sales@mgocspares.co.uk

29 1 2 Fixed Type 4 Biased Type Telephone: Fax: , sales@mgocspares.co.uk

30 1 G010 Carb kit - S.U - HS HS6 Conversion: Needle Type Part No. A pair of HS6 s add about 6 bhp to a fast road car with a Fixed KP AUD1541 free-flow exhaust; the main improvement is torque at low to Fixed TE AUD1347 mid revs, with a small increase in fuel consumption. Biased BBW CUD1144 Biased BDR NZX8016 Standard needles (may need changing to suit the engine). Biased BAP CUD G001 Carb kit - Weber G003 Throttle cable - for G CRK116 Carb rebuild kit - HIF on CRK249 Carb rebuild kit - HS CRK254 Carb rebuild kit - HS on CSK50 Carb service kit - HIF CSK55 Carb service kit - HS CSK59 Carb service kit - HS - up to Z015 S.U - Tuning tool kit BCC500 S.U - Carb cleaner - Aerosol 500ml....A/R 4 G300on Perfomance needles Carburettor needles: Early MGB s used fixed needles while later cars had spring based types. Modified cars should be gas analysed on a rolling road to determine the needles to be used and to adjust them accordingly. The needles have a number or combination of letters stamped on them for identification and are always sold individually. 5 K022 Dashpot covers- up to AUD492 Carburettors - HS4 - Pair AUD325P Carburettors - HS4 - Pair - Exch AUD325AT Carburettors - HS4 - Pair - New AUS135P Carburettors - HS4 - Pair - Exch AUD278P Carburettors - HS4 - Pair - Exch AUD278T Carburettors - HS4 - Pair - New GSU322 Damper GSU560 Washer - Damper AUC2175 Screw - Dashpot AUC4387 Spring - Dashpot piston - Red AUC2057 Screw - Needle locking AUD4251 Screw - Needle locking AUD1005 Needle - No6 - Rich AUD1004 Needle - No5 - Standard AUD1008 Needle - No21 - Weak AUD1004 Needle - No5 - Rich AUD1530 Needle - FX - Standard AUD1473 Needle - GZ - Weak CUD1018 Needle - AAU AUD3306 Spring - Needle bias AUD4288 Guide - Needle WZX1341 Jet bearing kit WZX1340 Jet bearing kit GSU423 Jet - Front GSU431 Jet - Rear WZX1140 Slow run/fast idle kit WZX1323 Throttle disc kit WZX1177 Throttle spindle kit AUC1358 Screw - Throttle disc AUE278 Float lid assembly - Front AUE279 Float lid assembly - Rear GSU101 Needle and seat AUC2175 Screw - Float lid cover WL Washer - Spring GSU200 Float GSU550 Gasket - Float lid AUD2676 Grommet - Float chamber - Rear AUD2677 Grommet - Float chamber - Front GSU500 Gasket kit AUD616P Carburettors - HIF to Pair - Exch FZX1001P Carburettors - HIF4 - Pair to Exch FZX1001T Carburettors - HIF to New FZX1229P Carburettors - HIF on - Exch FZX1229T Carburettors - HIF on - New WZX1440 Jet bearing kit GSU401 Jet - Front GSU400 Jet - Rear GSU101 Needle and seat GSU206 Float - Front GSU205 Float - Rear GSU552 Seal - Float chamber AUD4207 Cover - Float chamber AUD3590 Screw - Float chamber cover WL Washer - Spring GSU322 Damper GSU560 Washer - Damper AUC2175 Screw - Dashpot AUC4387 Spring - Dashpot piston - Red AUD4251 Screw - Needle locking CUD1018 Needle - AAU Note: Fitted to AUD434 carbs (18V 581Y/582Y/583Y engines) AUD616 carbs (18V 779/780F engines). Needle Type Part No. Fixed No.5 AUD1004 Fixed No.6 AUD1005 Biased AAU CUD1018 Biased ACD CUD1051 Biased AAA CUD1000 Biased AAB CUD1001 Biased AAM CUD1011 Needle HS6 HS6 HIF6 Fixed Biased Biased Standard KP BBW BBW With K&N filters + complete exhaust BBW + modified head TE BDR BDR + road camshaft BAP K&N s, std cam BBW BBW Needle HS4 HS4 HIF4 Fixed Biased Biased Standard 5 AAU ACD With K&N filters 6 AAA AAA + complete exhaust AAM AAM + modified head AAM AAM + road camshaft AAB K&N s, std cam AAU AAU For fixed needle carburettors For biased needle carburettors Fixed needle. AUD 52 carbs (18G/GA engine) AUD 135 carbs (18GB engine) Fixed needle. AUD278 carbs (18GD engines) AUD325 carbs (18GG enines Biased needle. AUD492 carbs (18V 581F/582F/583F engines) Plain type for more efficient air flow in HS4/HIF carbs; sold individually Fits all HIF4 applications on chrome bumper cars Fits all HIF4 applications on rubber bumper cars Fits all HIF4 applications on chrome bumper cars

31 44 CUD1051 Needle - ACD Note: Fitted to FZX1001 carbs (18V 846F/847F engines). FZX1229 carbs (18V846F/847F engines). Fits all HIF4 applications on rubber bumper cars 45 AUD3306 Spring - Needle bias AUD4287 Guide - Needle WZX1436 Slow run/fast idle kit WZX1435 Slow run/fast idle kit WZX1439 Slow run/fast idle kit WZX1323 Throttle disc kit WZX1329 Throttle disc kit WZX1170 Throttle spindle kit AUC1358 Screw - Throttle disc AUD3577 Seal - Throttle spindle AUD4273 Throttle return spring - Front AUD4272 Throttle return spring - Rear AUD4418 Choke return spring - Front AUD4417 Choke return spring - Rear GSU500 Gasket kit Note on Standard SU 1 1/4 Carburetters; HS4 or HIF4: A pair of 1 1/2 SU s was standard fitment on UK spec MGB s throughout production; the fixed needle HS4 s being used from , the spring biased needle HS4 s from and the spring biased needle HIF4 s from 1974 onwards. AUD434 carbs AUD616, FZX1001 carbs FZX1229 carbs AUD434 carbs AUD616, FZX1001, FZX1229 carbs or , sales@mgocspares.co.uk

32 Telephone: Fax: ,

33 55 17H2545 Baseplate - Alloy H2544 Sealing ring GFE1003 Filter element BHH1174 Grommet PWZ205 Washer - Plain BH Bolt - Fine thread BH Bolt - Coarse thread G210 Filter kit - K&N G215 K&N - Pancakes - 1 1/ G217 K&N - Pancakes - 1 3/ G224 K&N Filter cleaner and oil a/r 63 G221 K&N - Stub Stacks G228 S.U Chrome Air filters - 1 1/ G229 S.U Chrome Air filters - 1 3/ Note: After fitting the K&N filter kit it may be necessary to fit a richer needle. On fixed needle carburettors a No5 (AUD1004) or 6 (AUD1005) should work. For biased needle carburettors if an AAU needle (CUD1018) is insufficient we have a special rich needle AAA. The part number of the AAA needle is CUD1000. Further information is provided in table form, see below items 1 and FLK1 Fuel line kit - HS FLK3 Fuel line kit - HIF Fits inside standard casings For cars fitted with HS4 carburettors For cars fitted with HIF4 carburettors When fitting to HS4 type carbs 4x GHF120 (bolts) When fitting to HIF4 type carbs 4 x SH (bolts) When fitting to HS6 type carbs 4 x GHF120 (bolts) required Note on K&N Air Filters: All K&N filters are supplied ready oiled for installation; please see part number G224 for cleaning fluid and replacement oil or , sales@mgocspares.co.uk

34 Telephone: Fax: ,

35 66 GUG4013MGGasket - Manifold CAM1569B Gasket - Manifold - USA H911 Manifold - Inlet Thick flange ADP210 Plug - Screwed - Large A/R 69 51K3811 Washer A/R 70 AHH6962 Adaptor - Overdrive vacuum switch SH Screw /1 72 GHF332 Washer - Spring /1 73 PWZ205 Washer / H1397 Manifold - Inlet - Thick flange G767 Manifold - Inlet Thick flange H2572 Plug - Screwed - Small A/R 77 AEC435 Washer A/R 78 12H734 Plug - Brass CHM171 Manifold - Inlet - Thin flange H357 Adaptor - Vacuum advance pipe ADU1402 Adaptor - Brake servo Washer FHS2513 Stud - Manifold - Outer FHS2515 Stud - Manifold - Inner FHS2513 Stud - Manifold G2418 Washer - Thick GHF332 Washer - Spring GHF261 Nut - Brass AEA635 Welch plug - Cup type K8159 Welch plug - Dished type AHH6731 Bracket - Front filter AHH6732 Bracket - Rear filter G2125 Gasket - Carburettor to filter AHH6465 Seal - Air filter coupling TMG714 Heatshield - S/steel - HS6 only - Pair H719 Heatshield H3607 Heatshield CAM1194 Heatshield CHS2522 Stud - Manifold to carburettor AEC2083 Gasket - Carburettor to manifold H712 Spacer block NT Nut - Carburettor GHF301 Washer - Spring ADU9535 Anti run-on valve ADU9535N Anti run-on - Fit kit - Non servo ADU9535S Anti run-on - Fit kit - Servo car H7759 Cover H7758 Diaphragm H5191 Valve assembly - Emission control BAU5065M Breather hose a/r 105 GHC406 Hose clip - Worm type H1405 Adaptor K3811 Washer H1406 Bracket - Emission control valve GHF117 Screw GHF331 Washer - Spring GHF200 Nut G002C K & N engine breather - Chrome G002B K & N engine breather - Black AHH9950 Hose - Overflow pipe G308 Clip - Hose H1251 Pipe - Overflow - Front carburettor H1252 Pipe - Overflow - Front carburettor H853 Clip- Overflow pipe GHF301 Washer GHF332 Washer - Spring GHF201 Nut AHH7382 Bracket - Overflow pipe G2134 Y piece CAM1818 Hose - Y piece to tappet chest GHC406 Hose clip - Worm type CAM5226 Hose - Y piece to front carburettor CAM5227 Hose - Y piece to rear carburettor ACH5854 Hose clip BBK1 Breather hose kit G engines To suit large threaded holes To suit large threaded holes 3 synchro overdrive gearbox Quantity reduced when overdrive adapter fitted. Note: If 12H1734 is NLA hole may be tapped 5/8 in UNF. ADP210 and 51K3811 will then fit. 18GA, GB, GD/We to 2238, GD/RWE to G (-) series after 12H1397 To suit small threaded holes. To suit small threaded holes. To suit large unthreaded holes. When brake servo fitted When brake servo fitted 18G (-) series (Thick flange manifolds) 18G (-) series (Thick flange manifolds) 18V series (Thin flange manifolds) Cup type fitted from approximately 1977 on. For cars fitted with HS4 carburettors. For cars fitted with HS4 carburettors. When fitted HS4 carburettors - Not automatic. When fitted HIF4 carburettors or automatic transmission prior to September September 1976 on. 18GA, GB, GD engines. 18GG, 18V engines. Carburettor end or , sales@mgocspares.co.uk

36 RV8 Style Locking Petrol Cap Telephone: Fax: , sales@mgocspares.co.uk

37 1 E020 Petrol cap - RV8 style - Locking E021 Petrol cap - S/steel - Locking GZC1505 Filler cap AHH6268 Filler neck seal AHH6281 Filler pipe BHH191 Hose - Tank to filler pipe BHH2205 Filler neck seal CHA444 Filler pipe BHH2206 Hose - Tank to filler pipe GHC1622 Hose clip - Worm type HCS1622 Hose clip - Wire type AHH7388 Foam seal - Tank to boot floor ARH176 Petrol tank - Strap on ARO4566 Plug - Drain ARH1499 Washer BHA4292 Tank sender unit H1082 Seal - Cork ARG923 Screw AHH6252 Packing strip AHH6253 Mounting strap BH Bolt GHF221 Nut - Locking GHF300 Washer - Plain AHH6257 Hanger - Rear CLZ427 Clevis Pin GHF300 Washer - Plain GHF500 Split pin NRP2 Petrol tank - Up to NRP1174 Petrol tank - From NRP2K Petrol tank - Fitting kit Alternative on all cars Use up to GHN5, GHD and GD2D Use GHN5, GHD and GD2D on but see note after item 22 below. GHN3-101 to Fitted up to GHN5, GHD and GD2D Fitted from GHN , GHD on Note: From GHN5, GHD to GHN , GHD and GD2D on tank NRP 1132 was fitted. This tank is NLA and should be replaced by NRP2 or NRP2S together with hose BHH191 and filler pipe AHH AHH7386 Packing strip GHF222 Nut - Locking GHF315 Washer - Plain GHF120 Screw GHF315 Washer - Plain AHC442 Washer - Fibre Nut - Caged ARH672 Plug - Drain ARA967 Washer AHU1027 Tank sender unit ADU3218 Tank sender unit ARA1502 Seal - Rubber ARA1501 Locking ring Castrol - Valvemaster Plus Fitted to early NRP 2 only. Not fitted to replacement tanks. Use with NRP2 Use with NRP ml treats 250 litres of unleaded fuel Ultimate protection against valve seat recession Provides an octane boost to unleaded fuel, reducing knocking Protects engines under all driving conditions Reduces the need to re-tune Keeps the fuel system clean and provides excellent corrosion protection or , sales@mgocspares.co.uk

38 Telephone: Fax: ,

39 36 AZX1332 Fuel pump - Positive earth AZX1332EP Fuel pump - Positive earth - Electronic AZX1331 Fuel pump - Negative earth AZX1331EN Fuel pump - Negative earth - Electronic AUA1486 Olive - Elbow AAA17 Nut - Olive AUA1478 Elbow AHH6996 Hose - Flexible - Pump to pipe ACH5854 Clip A/R 42 G060 Fuel pump - performance G065 Fuel regulator - STD - Glass G065FE Fuel filter element - Standard G066 Fuel regulator - comp - Metal G066FE Fuel filter element - Comp AZX1318 Fuel pump - Positive earth AZX1318EP Fuel pump - Positive earth - Electronic AZX1307 Fuel pump - Negative earth AZX1307Z Fuel pump - Negative earth - Electronic AZX1307EN Fuel pump - Negative earth - Electronic - O/E AHH6709 Bracket - Fuel pump AHH6708 Grommet GHF200 Nut GHF331 Washer - Spring GHF300 Washer - Plain SH Screw BHH1635 Grommet - Fuel pump mounting GHC1622 Clip - Worm drive GHN3-101 to GHN Note: These cars were all originally positive earth but many have been converted to negative earth. Check before ordering fuel pump Originally GHN3, GHD3 cars were all positive earth But many have now been converted to positive earth. All GHN4/5, GHD4/5 are negative earth. Chrome bumper cars Rubber bumper Rubber bumper Telephone: or , sales@mgocspares.co.uk

40 Telephone: Fax: , sales@mgocspares.co.uk

41 53 F060 Fuel line kit to Nov 1973 (HS4) C/B 1 53 F062 Fuel line kit to 1976 (HIF4) C/B F064 Fuel line kit on (HIF4) R/B AHH7371 Hose - Flexible - Petrol pump /2 55 AUC1833 Banjo union AUC2698 Bolt - Banjo union AUC2141 Washer - Sealing AHH6703 Pipe - Tank to pump (copper) PCR509 Clip - To boot floor AHH6995 Pipe - Pump to carburettor (copper) PCR509 Clip - To gearbox tunnel PCR507 Clip - To bulkhead AHH6707 Hose - Flexible - Carburettors H889 T - Carburettors FLK1 Flexible fuel line kit - HS FLK3 Flexible fuel line kit - HIF GGT101 Braided fuel hose - 2 1/ GGT102 Braided fuel hose - 6 3/ GGT103 Braided fuel hose - 7 1/ GGT104 Braided fuel hose GGT105 Braided fuel hose / GGT106 Braided fuel hose CPP1001 Pipe - Tank to hose (copper) BHH1940 Banjo union CDU2283M Flex, fuel hose - 5/16 bore - Per mtr...a/r 68 UKC3794 Clip - Hose PCR809 Clip - To boot floor CDU2283M Flex, fuel hose - 5/16 bore - Per mtr. A/R 71 UKC3794 Clip - Hose Fuel filter Clip - Pipe to bulkhead and inner wing H7615M Flex, fuel hose - 1/4 bore a/r 75 UKC3793 Clip - Hose G067 Fuel filter - Chrome - 1/ G067FE Filter element G068 Fuel filter - Chrome - 5/ G068FE Filter element Clip - Pipe to bulkhead Flexible fuel hose - 1/4 bore UKC3793 Clip - Hose GWW201M Tubing - 4.8mm O/Diameter A/R T piece AHH8790 Tubing - 9.5mm O/Diameter NLA 79 GWW404 T piece ACH5854 Hose Clip A/R See note below 79 Quantity increased on r/b cars Fitted GHN on. Finished at Deleted on r/b cars GHN , GHD GHN on (fitted with AZX 1318 or AZX 1307 pump GHN on (fitted with AZX 1318 or AZX 1307 pump Chrome bumper cars Chrome bumper cars Chrome bumper cars up to GHN5, GHD (fitted with HS4 carburettors) Chrome bumper cars. Hoses can be (carefully) cut to required length after removing end cover. R/B cars fitted with NRP2 Rubber bumper cars fitted with NRP1174 Pipe to filter and filter to pipe Pipe to carburettor and inter carburettor Rubber bumper Note: We are able to supply petrol pipe kits to fit your car. These contain sufficient copper pipe, hoses and clips to service the complet car. Kit includes a special nut driver for the clips. Please note the kits are not necessarily made up exactly as per original specification in every detail or , sales@mgocspares.co.uk

42 COOLING: RADIATORS EXPANSION BOTTLES HOSES FANS -ELECTRIC COOLANT MGOC Spares & Accessories, Octagon House, Swavesey, Cambridge CB4 5QZ Tel: and

43 Telephone: Fax: , sales@mgocspares.co.uk

44 1 ARH260E Radiator - Rear filler - Recon NRP1142 Radiator - Centre filler - New NRP1142ALU Radiator - Centre filer - Aluminum 3 GRC102 Radiator cap - 7 lbs GRC109 Radiatorcap - 10lbs GRC111 Radiator cap - 13 lbs SH Screw - Long - Top GHF120 Screw - Short /2 5 GHF332 Washer - Spring /4 6 AHH6320 Packing - Radiator /2 7 GRH1001M Overflow hose a/r 8 PCR611 Clip - hose ARH1050 Draintap ARH517 Washer GRH305 Hose - Top and bottom ACH5031 Elbow - Bottom hose FMK8859 Hose - Water pump to elbow AMK8857 Union - Heater outlet K638 Washer - Union GRH105 Heater hose - 1/2 bore - 8 long GRH305 Hose - Top GRH498 Hose - Bottom GHC913 Hose clip - Worm type /4 18 HCS913 Hose clip - Wire type /4 19 GHC406 Hose clip - Worm type /1 19 HCS406 Hose clip - Wire type /1 20 NRP1154 Radiator - Electricfan - New GRH592 Hose - Top GRH641 Hose - Bottom URP1126 Switch - Fan thermostat G118 Thermo Switch G118FK Thermo Switch - fitting kit URP1027 Seal- Fan switch KTP9003 Switch - Fan thermostat KTP9005 Seal - Fan switch KTP9006 Clip - Switch seal BHH1052 Tie - Radiator - RH BHH1304 Tie - Radiator - LH SH Screw - Radiator tie to slam panel GHF301 Washer - Plain GHF332 Washer - Spring GHF201 Nut - Plain SH Screw - Long - Radiator mounting SH Screw - Short - Radiator mounting.....2/4 35 GHF332 Washer - Spring /6 36 GHF301 Washer - Plain /6 GHN3, GHD3 (3 syncromesh) cars GHN4/5, GHD4/5 cars to September 1976 GHN4/5, GHD4/5 cars to September 1976 GHN3, GHD3 (3 syncromesh) cars GHN4/5, GHD4/5 chrome bumper cars Rubber bumper cars Radiator to diaphram Note: Middle nut deleted on Replacement radiators Quantity reduced at GHN4, GHD Deleted on later radiators Deleted on later radiators 18G (-) series engines 18V engines to September V engines to September 1976 September 1976 on Use prior to KTP9003. URP1126 has pin type electrical connections GHN on, GHD on KTP9003 has spade type electrical connctions September 1976 on 37 CHK1 Cooloing Hose Kit - Up to CHK2 Cooling Hose Kit CHK3 Cooling Hose Kit on G382 Silicone Hose Kit to or , sales@mgocspares.co.uk

45 Telephone: Fax: ,

46 39 HZA2327 Diaphragm AHH7205 Seal - Diaphragm SH GHF332 Screw Washer - Spring Diaphram to body 43 GHF301 Washer - Plain AHH6321 Tie - Radiator - RH AHH6322 Tie - Radiator - LH GHF201 Nut GHF332 Washer - Spring GHF301 Washer - Plain BHH1305 Guard - Fan blade SH Screw GHF331 Washer - Spring GHF300 Washer - Plain ALU1081 Fan motor / H8238 Fan blade /2 54 G110 Kenlowe Fan Kit - C/B G113 Kenlowe Fan Kit on G116 Kenlowe Fan Kit to R/B BHH1028 Motor bracket - RH SH Screw /3 57 GHF331 Washer - Spring /3 58 GHF300 Washer - Plain / BHH1029 SH Clamp - Lower /2 Screw /4 September 1976 on 61 GHF331 Washer - Spring /4 62 BHH1306 Motor bracket - LH GHF117 Screw GHF331 Washer - Spring GHF200 Nut ARH250 Expansion tank GRC110 Radiatorcap - 15lbs GRH1005 Hose - Tank to radiator K 8341 Clip - Hose GRH1001M Hose - Overflow A/R 71 BHH2132 Strap - Expansion tank GHF222 Nut - Locking GHF332 Washer - Spring GHF301 Washer - Plain F210 Kenlowe Hot Start G118 Thermo Switch G118FK Thermo Switch - fitting kit Required for CB cars only. 77 G231 Water Wetter 355ml A/R Water wetter improved heat transfer: Water wetter is a cooling system heat transfer agent that can reduce coolant and engine temperature by as much as 15 deg. F. Water Wetter improves the ability of a coolant to wet heat transfer surfaces by 50 percent, therby providing significantly better coolant contact and is particularly appropriate for use in performance engines or where high engine temperatures are being experienced. One 355ml bottle is sufficient to treat fifteen litres of radiator coolant. 78 FLC5 Forlife Radiator Fluid A/R Advanced performance car engine protection: 4-Life is a long-lasting time proven advanced coolant, used on road, track and in motor museums over the past twenty years. Reformulated using latest additive technology to provide even higher levels of protection for all classic and performance motor vehicles. 4-Life provides 10 years of complete long-lasting protection with significant benfits over ordinary anti-freeze/water mixtures and heat transfer agents that require changing anually. High boiling point at 180c, enables coolant levels to remain constant even under arduous or competition conditions. Anti-foaming agents eliminates engine hotspots in competition, rear engine/front radiator configured cars, in fact a benefit for any vehicle requiring improved engine cooling. Corrosion protection to cast iron, brass and aluminium forming a protective barrier. Used undiluted 4-Life is a non-acidic PH balanced coolant, no corrosive impurities or limescale present to cause decay and restrict coolant flow. Anti-freeze protection down to -42c avoiding frost expansion damage even in harsh conditions and only one fill is required for ten years of complete protection. Colour indicator provides an instant liquid litmus safety check, to warn of head gasket failure, whereupon 4-Life changes colour from red to yellow, indicating the presense of corrosive gasses. 4-Life is reusable after gasket fault is rectified, returning to its normal red colour or , sales@mgocspares.co.uk

47 EXHAUST: SYSTEMS MANIFOLDS FITTING KITS TAIL PIPES / PASTE BANDAGE MGOC Spares & Accessories, Octagon House, Swavesey, Cambridge CB4 5QZ Tel: and sales@mgocspares.co.uk

48 1 2 MGB 1800 S/S Systems are all polished finish as above Telephone: Fax: , sales@mgocspares.co.uk

49 1 B001 S/S - C/B - STD Exhaust B002 S/S - R/B - STD Exhaust B004 S/S - C/B - Bomb exhaust B005 S/S - R/B - Bomb exhaust B012 S/S - Performance manifold C001 M/S - Club special exhaust C003 M/S - Performance pack C002 M/S - Performance manifold + Interpipe C008 M/S - HDR - Manifold + exhaust GEX3263 Downpipe GEX1316 Pipe - Connecting - Front GEX3393 Silencer - Centre GEX1321 Pipe - Connecting - Rear GEX3429 Silencer - Rear GEX9008 Clamp - 1 7/8 in GUG4013MG Gasket - Manifold CAM1569B Gasket - Manifold - USA H709SR Manifold - Exhaust - Thick flange - Recon.1 16 FHS2513 Stud - Manifold to head - Outer FHS2515 Stud - Manifold to head - Inner H3911SR Manifold - Exhaust - Thin flange - Recon FHS2513 Stud - Manifold to head G2418 Washer - Thick GHF332 Washer - Spring GHF261 Nut - Brass K1177 Nut - Brass - 5/16 - UNF - Long GEG753 Downpipe seal CHS2513 Stud - Downpipe GHF261 Nut - Brass K1177 Nut - Brass - 5/16 - UNF - Long GEX7189 Bracket - Exhaust to gearbox GEX7190 Bracket - Exhaust to gearbox BHH1542 Bracket - Exhaust to gearbox GHF120 Screw GHF301 Washer - Plain GHF332 Washer - Spring GHF201 Nut GEX7194 Strap GHF103 Screw GEX7074 Clip - Downpipe GHF332 Washer - Spring GHF201 Nut C100on Exhaust - Fitting kits SH Screw GHF331 Washer - Spring GEX7275 Mounting - Rear EFK2 Exhaust fitting kit - Rear - up to BH Bolt GHF300 Washer - Plain GHF331 Washer - Spring GHF200 Nut GEX7201 Bracket - Exhaust - Rear EFK3 Exhaust fitting kit - Rear to GEX7442 Bracket - Exhaust - Rear EFK4 Exhaust fitting kit - Rear on GEX7204 Mounting - Intermediate EFK1 Exhaust fitting kit - Centre - All SH Screw GHF331 Washer - Spring SH Screw GHF331 Washer - Spring GHF200 Nut BH Bolt GEX7182K Bush and housing assembly GHF332 Washer - Spring GHF201 Nut GEX7191 U bracket - Intermediate BMG100 U bracket - Intermediate - S/steel GHF103 Screw GHF332 Washer - Spring GHF201 Nut GEX7252 Saddle clip GEX7202 Bracket hanger GEX7493 Mounting - Rubber Bobbin - Long thread.2 59 GEX7251 Mounting - Rubber Bobbin - Short thread 2 60 AHC442 Washer - Heat insulating PWZ 205 Washer - Plain GHF332 Washer - Spring GHF201 Nut G (-) series 18G (-) series 18V series 18V series 18V series 3 syncro gearbox 4 syncro gearbox, C/B 4 syncro gearbox, R/B Chrome bumper 1800 cars to GHN4/GHD Note: Later rear bracket kit GEX7201K may be fitted instead Chrome bumper cars Chrome bumper cars Rubber bumper cars Rubber bumper cars Rear mounting to boot floor - All models Rear mounting to boot floor - All models All models GHN4/GHD on or , sales@mgocspares.co.uk

50 Telephone: Fax: ,