NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES
|
|
- Scot Heath
- 5 years ago
- Views:
Transcription
1 NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES S.No 1 Name of the Laboratory ENGINEERING PRACTICES Total Area of Lab Major Equipment Staff Incharges Photo Gallery 1. Arc welding transformer 4.0 kwa 230V/I Phs. 150A 5.0 kwa 230V/II Phs. 200A 6.0 kwa 230V/II Phs. 250A 8.0 kwa 415V/III Phs. 250A 2. Welding booth with exhaust facility 3. Welding accessories like welding shield, chipping hammer, wire brush, etc. 4. Oxygen and acetylene gas cylinders, blow pipe and other welding outfit. 5. Centre Lathe 6. Hearth Surface, anvil and smithy tools 7. Moulding table, foundry tools 8. Study-purpose items; centrifugal pump, Airconditioner 9. Plumbing Accessories Pipe Vice Pipe Wrench 18,Pipe Wrench 24 In Ratchet Pipe Die Set ½ In Ratchet Pipe Die Set 11/4 10. Carpentry Accessories like Jack plane, Chisel, Marking Gauge, Handsaw, Try square, Mallet, Triangular file, etc., B.Nagarajan
2 2 MANUFACTURING TECHNOLOGY I 50 x49.5 1)4-6 bed length cone pulley light duty lathe machine. 2) ACCU- MAX Brand Light Duty Lathe Machine P.Surulimani 3 MANUFACTURING TECHNOLOGY II 50 x49.5 1)BANKA Brand All Geared Lathe Machine with standard accessories 2)GEE DEE WAILER Turret and Capstan Lathe with standard equipments and attachments 3)BEZEN brand Horizontal Universal Milling Machine with standard accessories 4)Milling Machine Vertical Attachment & Universal Dividing Head 5) ACCU MAX Manual Surface Grinding Machine with fittings and accessories 6) DEVCO brand Manual Cylindrical Grinding Machine with electrical accessories 7) RUN UP brand heavy duty All geared type Shaping Machine with standard accessories. 8) OLYMPIC brand Slotting Machine with standard accessories 9) SIDDHAPURA Radial Drilling Machine 10) MATCH LESS brand Hydraulic Power Control Hacksaw Machine with Bar Stand 11)UNITECH Lathe Tool Dynamometer 12) Milling Tool Dynamometer 13) Tool & Cutter Grinder Machine 14) Gear Hobbing Machine 15) Centreless Grinding Machine V.Thirumalairaj
3 4 5 THERMAL ENGINEERING I THERMAL ENGINEERING II 50 x25" 50 x25" 1)Two stroke Petrol Engine Model 2)Four stroke Diesel Engine Model. 3)Red Wood Viscometer 4)Flash and Fire Point Apparatus 5)Single cylinder 4-stroke Diesel Engine with mechanical load. 6)Single cylinder 4-stroke Diesel Engine with electrical load 7)Multi-cylinder Petrol Engine with Hydraulic Load 8) Double cylinder 4-stroke Diesel Engine with hydraulic load. 9)Single cylinder 4-Stroke Petrol Engine with Electrical Load 10)Data Acquisition system 1)Guarded plate apparatus 2)Lagged pipe apparatus 3)Natural convection-vertical cylinder apparatus 4)Forced convection inside tube apparatus 5)Pin-fin apparatus 6)Stefan-Boltzmann apparatus 7)Emissivity measurement apparatus 8)Parallel/counter flow heat exchanger apparatus 9)Two stage reciprocating air compressor. 10)Refrigeration test rig 11)Air-conditioning test rig 12)Heat transfer through composite wal Apparatus 13)Thermal conductivity of insulating powde Apparatus R.Radhakrishnan K.Dharmaraj A.Karthikraja K.Dharmaraj
4 6 DYNAMICS ABORATORY 41.3 x Spur Gear, Helical Gear, Bevel Gear, Worm Gear, Simple Gear Trains, Compound Gear Trains, Epi-Cyclic Gear Train, Differential Gear Train, 2.Slider Crank Mechanism, Crank Rocker Mechanism (4 bar mechanism, Double rocker mechanism, double cranker mechanism), Oscillating cylinder mechanism 3. Universal Joints ( Kinematics of single and double joints) 4. Motorized Gyroscope with non-contact type tacho meter 5. Universal Governor ( Watt, Porter, Proell, Spring controlled governor) 6. Cam study system ( Draw profile -Hand operated) 7. Cam Jump system 8. Whirling of shaft apparatus 9. Balancing of rotating masses ( Static and dynamic Balancing) 10. Vibrating table Transmissibility ratio 11. Oscillating system (Determine moment of inertia for connecting rod and flywheel) 12. Turn Table apparatus 13. Bifilar suspension and compound pendulum 14. Spring mass system ( Single degree, multi degree freedom)equivalent Spring Mass system (damped and undamped Vibration) 15. Single and double rotor system ( Torsional natural frequency) 16. Free Beam with and without concentrated mass system ( Transverse vibration ) 17. Cantilever beam setup (Transverse vibration) 18. Dynamic Balancing Machine T.Sudarsanan A.Sivaraj
5 7 METROLOGY AND MEASUREMENTS 41.3 x Micrometer -0-25mm, Vernier Caliper, Vernier Height Gauge, Vernier depth Gauge, Slip Gauge Set, Gear Tooth Vernier, 2. Sine Bar, Sine Center, Bevel Protractor 3. Floating Carriage Micrometer 4. Profile Projector 5. Tool Makers Microscope 6. Mechanical Comparator, Autocollimator 7. Temperature Measuring Setup 8. Displacement Measuring Setup 9. Force Measuring Setup 10. Torque Measuring Setup 11. Vibration / Shock Measuring Setup 12. M Inverted Trinacular Metallurgical Microscope 13. Lathe tool Dynamometer 14. M Coaxial Metallurgical microscope 15. Image measuring Software 16. Bore Gauge, Telescopic Gauge 17. Digital Portable Surface Roughness Tester M.Chellapandian M.Santhosh pandian 8 CAD/CAM 1.Trainer CNC Lathe 2. Trainer CNC Milling 3. CAM Software (15 Users) & Creo Element /Pro( pro / Engineer WF 5.0) (50 User) 4. Desktop with 18.5 LED Monitor HCL 50 x30.9 ACER 5. HP Laser jet Printer 1020Plus 6. Computer Revolving Cushion Chair 7.Sony DX 100 Projectors 2300 Ansi Lumens 8. UPS 25 KVA,HER, 360V, 66AH, EX, TUB(+), 30, OTR R.Santhaseelan K.Dharmaraj
6 9 MECHATRONICS x Basic Pneumatics Trainer kit 2. Basic level Electro Pneumatics Trainer kit 3. Basic Electro Pneumatics with PLC Trainer Kit 4. Hydraulic Linear actuation system trainer with LABVIEW interfacing for direction, speed, velocity and force measurement 5. Hydraulic Simulation Software 6. Pneumatic Simulation Software Microcontroller kit with stepper motor and drive circuit sets 8. LAB VIEW software with Sensors to measure Pressure, Flow rate, Process control trainer (Flow / Temperature / Pressure) 9. Speed control of AC & DC Drives 10. Hybrid controller based DC drives R.Nagaraja M.Mahesh 10 METAL FORMING 1)Hydraulic Press 40T with its accessories 2)Rolling Machine with its Specimen 3)Water Hammer Die with its Specimen M.Pradeep
Faculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
More informationDETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)
DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial
More informationIII EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY
Sl No Faculty of Mechanical Engineering BE Robotics and Automation (R 2013) Semester III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY 1 0 30V RPS 12 2 0 50V RPS 2 3 0 5V RPS 2 4 0 30V Voltmeter 10
More informationDepartment of Mechanical Engineering Laboratories
LATHE SHOP Department of Mechanical Engineering Laboratories 1 Anil Light Duty Lathe Machine (2 nos) 2 Light Duty Lathe Machine (7 nos) 3 Medium Duty Lathe Machine (3 nos) Samrat Medium Duty Lathe Machine
More informationDYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system.
DYNAMICS LABORATORY AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. OBJECTIVES: To supplement the principles learnt in kinematics and Dynamics of Machinery. To
More informationL15 Dynamics & Vibration Laboratory
LABORATORY PLANNING GUIDE L15 Dynamics & Vibration Laboratory Content Covered subjects according to the curriculum... 2 Main concept... 3 Initial training provided for laboratory personnel... 3 Requirements
More informationDEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB.
DEENBANDHU CHOTURAM UNIVERSITY OF SCIENCE & TECHNOLOGY, MURTHAL (DEPARTMENT OF MECHANICAL ENGINEERING) List of Equipments/Apparatus: SOM LAB. Sr. Nos. Name of items Qty. 1. Brinell hardness testing m/c
More informationMotor Vehicle Engineering
Motor Vehicle Engineering 25 It deals with the design and maintenance of a motor vehicle and its accessories. The main courses in this stream are: IC Engine & Reciprocating Machine Motor Vehicle Engineering
More informationMeasurements Lab (620451):
Measurements Lab (620451): To introduce the practical side of actuators and sensors, also helping to understand how that device can be used. 1. INTRODUCTION FOR MEASURMENT 2. NOISE MEASUREMENT 3. PIEZO-ELECTRIC
More informationTYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.
MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories
More informationDepartment of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus).
Department of Mechanical Engineering University of Engineering & Technology Lahore(KSK Campus). LAB DATA Lab Incharge: Engr. Muhammad Amjad Lab Assistant: Abbas Ali Lay-Out of Mechanics of Machines Lab
More informationFaculty of Mechanical Engineering B.E. Marine Engineering (R 2013) Semester III FLUID MACHINERY LABORATORY
Faculty of Mechanical Engineering B.E. Marine Engineering (R 23) Semester III MV63 MARINE HYDRAULICS AND FLUID MACHINERY LABORATORY Requirements for a batch of 30 students FLUID MECHANICS LABORATORY. 2.
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More informationSYLLABUS. osmania university. Force Analysis of Four-Bar and Slider Crank Mechanisms. CHAPTER - 2 : DYNAMIC FORCE ANALYSIS
Contents i SYLLABUS osmania university UNIT - I CHAPTER - 1 : STATIC TIC FORCE ANALYSIS Force Analysis of Four-Bar and Slider Crank Mechanisms. CHAPTER - 2 : DYNAMIC FORCE ANALYSIS Force Analysis of Four-Bar
More informationFaculty of Mechanical Engineering B.E. Automobile Engineering (R 2013) Semester III
. (R 03) Semester III AT63 AUTOMOTIVE COMPONENTS LABORATORY Multi Cylinder Petrol Engine. 3. 4. 5. 6. 7. 8. 9. 0. Multi Cylinder Diesel Engine Petrol and Diesel fuel systems each Heavy duty vehicle chassis
More informationDirectorate of Employment & Training Chhattisgarh SPIU Details of Proposed Procurement under Shopping Mode
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Directorate of Employment & Training Chhattisgarh SPIU Package No. Package Name Pkg Value
More informationINDEX. PAGE Adjustment mechanism for radial position of block on rotating
INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,
More informationMECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech
MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech 36, 100 feet Road, Natesan Nagar(Near Indira Gandhi Statue and Next to Fish-O-Fish), Pondicherry-605 005 Web : www.ieeemaster.com / www.lemenizinfotech.com
More informationQuestion 8 Engineering Higher Level
Rack and Pinion Rotary motion to linear motion As pinion rotates, gear teeth mesh with those on rack Applications: Lowering table on pillar drill ; Steering in Car Worm and Worm wheel Transmits power through
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationIII B.Tech I Semester Supplementary Examinations, May/June
Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally
More information+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our
More informationR10 Set No: 1 ''' ' '' '' '' Code No: R31033
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DYNAMICS OF MACHINERY (Common to Mechanical Engineering and Automobile Engineering) Time: 3 Hours Max Marks:
More informationDepartment of Mechanical Engineering Name of Lab: - Power Engineering
Name of Lab: - Power Engineering Major Equipment s 1 Reciprocating Air Comp. 2 Steam Engine Model (10165) 3 Model Of 2-Stroke Petrol Engine (10211) 4 Model Of 4-Stroke Petrol Engine (10212) 5 Model Of
More information05 Marks (c) Sketch and explain Lancashire Boiler.
Model question paper No.1 1. Answer any FIVE full questions choosing at least two questions from part A & two questions from part B 2. Use of steam tables is permitted 1. (a) Discuss briefly the different
More informationAlcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
More informationB.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY
1 B.TECH III Year I Semester (R09) Regular & Supplementary Examinations November 2012 DYNAMICS OF MACHINERY (Mechanical Engineering) Time: 3 hours Max. Marks: 70 Answer any FIVE questions All questions
More informationUNESCO / Vocational Education Erbil and Dohuk
Item Code Item Description Unit Qty Destination Intended Use Carpentry machine, multi-function (7 mini), large 06-12-00001 size set 2 06-12-00002 90 cm band saw for carpentry with full Wood turning lathe
More informationTheory of Mechanisms and Machines
Theory of Mechanisms and Machines Theory of Mechanisms and Machines C.S. SHARMA Formerly Professor Department of Mechanical Engineering Jai Narain Vyas University Jodhpur KAMLESH PUROHIT Professor Department
More informationTECHNOLOGY MECHANISMS
TECHNOLOGY MECHANISMS 3º ESO IES CHAN DO MONTE URTAZA 1 WHAT IS A MECHANISM? Mechanism are devices that have been designed to make jobs easier. They all have certain things in common: They involve some
More informationME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism)
ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) 1) Define resistant body. 2) Define Link or Element 3) Differentiate Machine and Structure 4) Define Kinematic Pair. 5) Define Kinematic Chain.
More informationFACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)
FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that SP Metrology System Thailand Co., LTD 88/115
More informationGOVERNMENT ITI DHANUVACHAPURA
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized HEAVY MACHINERY 1 Milling machine (vertical)size no1 with standard accessories & the
More informationProfile. Incorporated in 1975, in Chennai, India Equipped to manufacture STEEL FORGINGs & MACHINED Components for: Forging capacity of 2400 MT/annum
Chennai, India Profile Incorporated in 1975, in Chennai, India Equipped to manufacture STEEL FORGINGs & MACHINED Components for: Automobile Sector Earth Moving Equipments Power Sector Agricultural Sector
More informationTABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING
TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3
More informationAccurate Labs, 311, 312 Govinda Complex, GIDC Char Rasta, Vapi, Valsad, Gujarat. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 9 I. DIMENSION 1. CALIPER $ Vernier L.C. 0.01mm 7.5 µm 9.0 µm Using Caliper Checker & Slip Gauges L.C. 0.05mm 29.5 µm 30.0 µm Dial / Electronic L.C. 0.02mm 12.5 µm 13.5 µm 2.
More informationDiscipline Mechanical Calibration Issue Date Certificate Number C-0752 Valid Until Last Amended on - Page 1 of 6
Last Amended on - Page 1 of 6 I DIMENSION 1. Caliper $ (Vernier/Dial/Digital) LC : 0.01mm 0 to 600 mm 0 to 1000 mm 12.2 µm 13.3 µm Using Caliper Checker, Slip Gauge Block & 2. Depth Caliper $ (Vernier/Dial/Digital)
More informationTEST AND CALIBRATION SERVICES Ensuring quality and reliability.
> TEST AND CALIBRATION SERVICES Ensuring quality and reliability www.thalesgroup.com.au TEST AND CALIBRATION SERVICES ENSURING QUALITY AND RELIABILITY Introduction Thales Australia s Test and Calibration
More informationINSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad
INSTITUTE OF AERONAUTICAL ENGINEERING (Autonomous) Dundigal, Hyderabad -500 043 MECHANICAL ENGINEERING TUTORIAL QUESTION BANK Course Name Course Code Class Branch : DYNAMICS OF MACHINERY : A50317 : III
More informationCHAPTER 1 BALANCING BALANCING OF ROTATING MASSES
CHAPTER 1 BALANCING Dynamics of Machinery ( 2161901) 1. Attempt the following questions. I. Need of balancing II. Primary unbalanced force in reciprocating engine. III. Explain clearly the terms static
More information1. (a) Discuss various types of Kinematic links with examples. (b) Explain different types of constrained motions with examples.
Code No: RR310304 Set No. 1 III B.Tech I Semester Supplementary Examinations, February 2007 KINEMATICS OF MACHINERY ( Common to Mechanical Engineering, Mechatronics and Production Engineering) Time: 3
More informationTheory of Machines. CH-1: Fundamentals and type of Mechanisms
CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More informationCal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra
Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm
More informationTHONBURILOHA ENGINEERING COMPANY PROFILE
THONBURILOHA ENGINEERING COMPANY PROFILE ก 19. 30 ก ก ก. 10140. 02-4271471, 02-4275625, 02-4277757 FAX. 02-4277820 ก / ก ก ก. ก ก ก ก ก 42 ก ก ก ก ก ก ก 4 8 ก 20 ก ก ก ก ก ก Managing Director ก THONBURILOHA
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More informationMetrology Laboratory, CMTI, Central Manufacturing Technology Institute, Tumkur Road, Bangalore, Karnataka Accreditation Standard ISO/IEC 17025: 2005
aboratory Metrology aboratory, CMTI, Central Manufacturing Technology ast Amended on 22.09.2016 Page 1 of 15 I. DIMENSION (Basic Measuring, Gauge etc.,) 1. ANGE GAUGE BOCKS $ 0 to 90 2.8 arc sec Using
More informationDepartment of Mechanical Engineering ME6513 - METROLOGY AND MEASUREMENT LAB LABORATORY MANUAL Name Register No. Branch Year & Semester : : : : 1 CONTENTS S.NO. DATE EXPERIMENT NAME PAGE NO. 1 Calibration
More informationD & F Of Pneumatic Riveting Machine
PN-001 PN-002 PN-003 PN-004 PN-005 PN-006 PN-007 PN-008 PN-009 PN-010 PN-011 PN-012 PN-013 PN-014 PN-015 PN-016 PN-017 PN-018 PN-019 PN-020 PN-021 PN-022 PN-023 PN-024 PN-025 PN-026 PN-027 PN-028 Fabrication
More informationdidactecsanderson Mechanical & Automotive mechanisms MAM Mechanical Engineering Laboratory Apparatus Mechanical Engineering Laboratory Apparatus
2-YRWARRANTYONALLARMFIELDPRODUCTS DISCOVER WITH didactec Sanderson Mechanical Engineering Laboratory Apparatus Mechanical & Automotive mechanisms MAM Mechanical Mechanisms Automotive Mechanisms Theory
More informationHours / 100 Marks Seat No.
17412 16117 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)
More informationLABORATORY MANUAL DYNAMICS OF MACHINE LAB
LABORATORY MANUAL DYNAMICS OF MACHINE LAB Sr. No Experiment Title 1 To Perform Experiment On Watt And Porter Governors To Prepare Performance Characteristic Curves, And To Find Stability & Sensitivity
More informationWhat is a Mechanism?
Mechanisms What is a Mechanism? A mechanism is the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others. Generally used to: Change the
More informationKINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A
KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A 1. Define the term Kinematic link. 2. Classify kinematic links. 3. What is Mechanism? 4. Define the terms Kinematic pair.
More informationIndex for Labs under Civil Engineering
Index for Labs under Civil Engineering Sr. No. Laboratory Name 1 Applied Mechanics Laboratory- 1 2 Transportation Engineering Laboratory 3 Surveying Laboratory 4 Environmental Engineering Laboratory-2
More informationFIRSTRANKER. 2. (a) Distinguish (by neat sketches) betweenpeaucellier mechanism and Hart mechanism.
Code No: 07A51404 R07 Set No. 2 IIIB.Tech I Semester Examinations,May 2011 KINEMATICS OF MACHINERY Mechatronics Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks 1.
More informationCHAPTER-3 EXPERIMENTAL SETUP. The experimental set up is made with necessary. instrumentations to evaluate the performance, emission and
95 CHAPTER-3 EXPERIMENTAL SETUP The experimental set up is made with necessary instrumentations to evaluate the performance, emission and combustion parameters of the compression ignition engine at different
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationCO3 CO8 CO9 CO1 CO3 CO5
CO9 AUTOMOBILE ENGINEERING 15 AU32 - MATEIAL SCIENCE AND METALLURGY Explain different types of material crystal structures and arrangement of atoms. Describe various mechanical properties of materials.
More information'' ''' '' ''' Code No: R R16 SET - 1
Code No: R161232 R16 SET - 1 1. a) List the Primary requirements of a Steam Boiler. (2M) b) What are the distinguishing features between a Casting and a Pattern? (2M) c) Define (i) Brake Power; (ii) Indicated
More informationGOVERNMENT ENGINEERING COLLEGE, GODHRA
Practical No. - 1 To understand construction and working of various types of Steam boilers. 1) What is the function of Steam boiler? And what are factors should be considered while selecting a boiler?
More informationreciprocating cam with half-cycle safety overload mechanism permits adjustable
Acceleration of flying shear. device reduces initial... 104, 105 Adjusting mechanism, three-axis... 123 Arcs with inaccessible centers, plotting circular... 447-449 Assembly machine, mechanism for orienting
More informationMason Gray Strange Engine Reconditioning & CNC Metal Fab Equipment Page 1 of 9
1 FLYWHEEL GRINDER, KWIK WAY 450mm TABLE 200mm STONE 2 CAP GRINDER, BERCO MOD: SPB-2 S/NO: 149-B 3 PRECISION HONING MACHINE, SUNNEN MOD: LBB-1660 S/NO: 96472 WITH SUNNEN AG-300 PRECISION GAGE & COMPLETE
More informationMason Gray Strange Engine Reconditioning & CNC Metal Fab Equipment Page 1 of 5
1 FLYWHEEL GRINDER, KWIK WAY 450mm TABLE 200mm STONE 2 CAP GRINDER, BERCO MOD: SPB-2 S/NO: 149-B 3 PRECISION HONING MACHINE, SUNNEN MOD: LBB-1660 S/NO: 96472 WITH SUNNEN AG-300 PRECISION GAGE & COMPLETE
More informationSt.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad
St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: Kinematics of Machines Class : MECH-II Group A (Short Answer Questions) UNIT-I 1 Define link, kinematic pair. 2 Define mechanism
More informationKINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING
KINGS COLLEGE OF ENGINEERING DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK Sub Code/Name: ME 1352 DESIGN OF TRANSMISSION SYSTEMS Year/Sem: III / VI UNIT-I (Design of transmission systems for flexible
More informationLab #3 - Slider-Crank Lab
Lab #3 - Slider-Crank Lab Revised March 19, 2012 INTRODUCTION In this lab we look at the kinematics of some mechanisms which convert rotary motion into oscillating linear motion and vice-versa. In kinematics
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Laboratory locations: Unit 9 G B Quality ssurance (Consultants)
More informationAttention is drawn to the following places, which may be of interest for search:
F01B MACHINES OR ENGINES, IN GENERAL OR OF POSITIVE-DISPLACEMENT TYPE, e.g. STEAM ENGINES (of rotary-piston or oscillating-piston type F01C; of non-positive-displacement type F01D; internal-combustion
More informationCCE RF CCE RR NSQF LEVEL-2. General Instructions to the Candidate : This Question Paper consists of 34 objective and subjective types of question.
Tear here TEAR HERE TO OPEN THE QUESTION PAPER CCE RF CCE RR SL. No. : TTTT 34 ] [ 8 Total No. of Questions : 34 ] [ Total No. of Printed Pages : 8 : 88-EK Code No. : 88-EK NSQF LEVEL-2 & Subject : Automobile
More informationINDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts
INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--
More informationTENDER NOTICE Sealed tenders affixed with revenue stamp of Rs. 5/- are invited for and on behalf of Vice Chancellor, Islamic University of Science &
TENDER NOTICE Sealed tenders affixed with revenue stamp of Rs. 5/- are invited for and on behalf of Vice Chancellor, Islamic University of Science & Technology(IUST), Awantipora from OEM/Authorized Dealers/Distributors
More informationCaliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra
Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8
More informationDHANALAKSHMI COLLEGE OF ENGINEERING
DHANALAKSHMI COLLEGE OF ENGINEERING VISION Dhanalakshmi College of Engineering is committed to provide highly disciplined, conscientious and enterprising professionals conforming to global standards through
More informationA.A. Calibration Pvt. Ltd., 13-C/18, Vasundhara Haat, Vasundhara, Ghaziabad, Uttar Pradesh. Discipline Mechanical Calibration Issue Date
Last Amended on 02.09.2014 Page 1 of 10 I. DIMENSION 1. VERNIER CALIPER $ L.C. 0.01mm 0 to 300 mm 0 to 600 mm 0 to 1000 mm 8 µm 14 µm 16 µm, Slip Gauge Accessories, Gauge Block L.C. 0.02 mm 0 to 1500 mm
More informationMLR Institute oftechnology
MLR Institute oftechnology Dundigal, Hyderabad - 500 043 MECHANICAL ENGINEERING Assignment Questions DYNAMICS OF MACHINERY Course Title Course Code 55012 Regulation R13 Course Structure Lectures Tutorials
More informationAll levers are one of three types, usually called classes. The class of a lever depends on the relative position of the load, effort and fulcrum:
Página 66 de 232 Mechanisms A mechanism is simply a device which takes an input motion and force, and outputs a different motion and force. The point of a mechanism is to make the job easier to do. The
More informationOur test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationBRCM COLLEGE OF ENGINEERING & TECHNOLOGY BAHAL, BHIWANI Practical Experiment Instructions Sheet
BRCM COLLEGE OF KOM ME- 212 F KINEMATICS OF MACHINES LAB BRANCH-ME List of Experiments : 1. To study various types of Kinematic links, pairs, chains and Mechanisms. 2. To study inversions of 4 Bar Mechanisms,
More informationMechanical Series. Bearing Maintenance CEUs. Industrial Pneumatic Fundamentals CEUs. Industrial Hydraulic Fundamentals - 0.
Mechanical Series All industrial facilities use mechanical equipment in one form or another. Although the types of mechanical equipment can run the gamut from simple open/close valves to ultra complex
More informationAttention is drawn to the following places, which may be of interest for search:
CPC - F04B - 2017.08 F04B POSITIVE DISPLACEMENT MACHINES FOR LIQUIDS; PUMPS (machines for liquids, or pumps, of rotary piston or oscillating piston type F04C; non-positive displacement pumps F04D; pumping
More informationChapter 15. Inertia Forces in Reciprocating Parts
Chapter 15 Inertia Forces in Reciprocating Parts 2 Approximate Analytical Method for Velocity & Acceleration of the Piston n = Ratio of length of ConRod to radius of crank = l/r 3 Approximate Analytical
More informationPhone:
KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for
More informationsince 1952 Our expertise comes from our experience...since
since 1952 Our expertise comes from our experience...since 1952... www.dirinler.com.tr Our expertise comes from our experience... since 1952... Time 1966 The First Planing Machine Production in Turkey
More informationMoments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.
Moments The crane in the image below looks unstable, as though it should topple over. There appears to be too much of the boom on the left-hand side of the tower. It doesn t fall because of the presence
More informationDriver Driven. InputSpeed. Gears
Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure
More informationProfi Silver Line Range 2005 Only direct import. Created :58 Revised :40 Page 1
Profi Silver Line Range 2005 Only direct import. Created 10.02.2005 14:58 Revised 25.05.2005 11:40 Page 1 INDEX Article Group Page Angle Grinders 3 Cordless Screwdriver 4 Laser Jig Saw 5 Laser Circular
More informationPart VII: Gear Systems: Analysis
Part VII: Gear Systems: Analysis This section will review standard gear systems and will provide the basic tools to perform analysis on these systems. The areas covered in this section are: 1) Gears 101:
More informationQUESTION BANK Chapter:-6 Design of IC Engine Components
QUESTION BANK Chapter:-6 Design of IC Engine Components Que:-1 Design a cast iron piston for a single acting four stroke diesel engine for following data: Cylinder bore = 100 mm, stroke = 125 mm, Pmax
More informationŠKODA RAPID Diesel engines
Diesel engines Technical specifications 1.4 TDI/66 kw 1.4 TDI/66 kw (A) 1.6 TDI/85 kw Engine Engine type turbocharged diesel engine, turbocharger with self-aligning blades, in-line, liquid cooling system,
More informationOil & Gas. Engineering Machinery
. With combined more than 50 years of experience, BOPM has the ability to produce spur, helical, and bevel gears that will conform to your every specification and deliver the performance your application
More information(d) Bore Size Check from Dimensions table (page 112) that chosen flanges can accommodate required bores.
Fenaflex Couplings The Fenaflex coupling is a highly flexible, torsionally elastic coupling offering versatility to designers and engineers with a choice of flange combinations to suit most applications.
More informationChapter 15. Inertia Forces in Reciprocating Parts
Chapter 15 Inertia Forces in Reciprocating Parts 2 Approximate Analytical Method for Velocity and Acceleration of the Piston n = Ratio of length of ConRod to radius of crank = l/r 3 Approximate Analytical
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINES OR PUMPS F01 MACHINES OR ENGINES IN GENERAL (combustion engines F02; machines
More informationList of Machinery and Equipment for M.M.V.trade (Annexure A)
List of Machinery and Equipment for M.M.V.trade (Annexure A) S.NO Name and description of article Quantity (in Nos) 1. Steel rule 15 cm inch and metric 21-No s 2. Steel rule 30 cm inch and metric -do-
More informationSheet 1 Variable loading
Sheet 1 Variable loading 1. Estimate S e for the following materials: a. AISI 1020 CD steel. b. AISI 1080 HR steel. c. 2024 T3 aluminum. d. AISI 4340 steel heat-treated to a tensile strength of 1700 MPa.
More informationR.K. Scientific & Engg. Works
Fax No. : 01332-274252 Phone (Office & Res.): 01332-274252 Factory: 09634174252 Mobile: 09412919764 E-mail: rkscientific@rediffmail.com E-mail: rkscientific@gmail.com Web : www.rkscientific.com R.K. Scientific
More informationLoudon Industries, Inc. Facility List
Loudon Industries, Inc. Facility List 1 2 Thank you for your interest in Loudon Industries, Inc. We offer a diverse range of machining and engineering capabilities to satisfy our customers diverse requirements.
More information