GOVERNMENT ITI DHANUVACHAPURA

Unit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.

Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule

Phone:

KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for

NAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No

SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas

SAMPLES GAUGES. Tolerances OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS

SAMPLES GAUGES PLUG GAUGES Tolerances GO side Fit NO GO side OUR SPECIAL OFFER: PLUG GAUGES WITH REQUIRED FIT OR INDIVIDUAL TOLERANCES ACCORDING TO YOUR SPECIFICATIONS BESTSELLER: FEELER GAUGE TAPES IN

List of Machinery and Equipment for M.M.V.trade (Annexure A)

List of Machinery and Equipment for M.M.V.trade (Annexure A) S.NO Name and description of article Quantity (in Nos) 1. Steel rule 15 cm inch and metric 21-No s 2. Steel rule 30 cm inch and metric -do-

OFFICE OF THE PRINCIPAL INDUSTRIAL TRAINING INSTITUTE RAMPURA

Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized SL No- PACKAGE NO. AMOUNT REMARK 1 PACKAGE - 1 -MEASURING TOOLS 58000 2 PACKAGE - 2-

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)

DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours

Matt Morgan Assistant Superintendent of Support Services. Kristine Johnston Director of Purchasing. Date: May 2, 2014

To: Matt Morgan Assistant Superintendent of Support Services From: Kristine Johnston Director of Purchasing Date: May 2, 2014 Re: Career and Technology Tools and Equipment Annual Contract #14-04-3976 The

Slow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING

LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center

Directorate of Employment & Training Chhattisgarh SPIU Details of Proposed Procurement under Shopping Mode

Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Directorate of Employment & Training Chhattisgarh SPIU Package No. Package Name Pkg Value

GOVT. OF MAHARASHTRA

GOVT. OF MAHARASHTRA DIRECTORATE OF VOCATIONAL EDUCATION & TRAINING, MAHARASHTRA STATE 3, Mahapalika Marg, Post Box No.10036, Mumbai 400 001. www.dvet.gov.in E-mail:desk16@dvet.maharashtra.gov.in Fax:22659235

Berufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009

Page 1 of 14 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 07 INFRASTRUCTURE CNC LIST Milling Concours Mondial des Metiers CNC Fraisage CNC Fräsen Position: Contact: Details: Email: Phone:

16 Spanners socket with speed handle, T-bar, ratchet and universal upto 32 mm set of 28 pieces with box

Syllabus e S.No. Mechanic Tractor LIST OF TOOLS & EQUIPMNT Name of the items Quantity of DGET norm's per Allen Key set of 2 pieces (2mm to 4mm) (5+) 2 Caliper inside 5 cm Spring 6 3 Calipers outside 5

Equipment available due to closure

Premfab - Fabrication and Engineering Equipment available due to closure (Ends: 2016-07-06 14:00:00.0) Premfab - Fabrication and Engineering Equipment available due to closure BUYERS PREMIUM 15% VAT 20%

Keyed Industrial Chucks Keyless Industrial Chucks Rubber-Flex Collet Chucks Arbors

Keyed Industrial Chucks... 1244 Keyless Industrial Chucks... 1248 Rubber-Flex Collet Chucks... 1250 Arbors... 1252 Sleeves, Sockets & Ejecting Drifts... 1255 Portable Tool Chucks... 1256 Special Purpose

Caliber Gauges & Instruments Laboratory, S. No. 14/1, Dattadigamber Soc. B, Warje Jakat Naka, Pune, Maharashtra

Last Amended on - Page 1 of 10 I. DIMENSION (Basic Measuring, Gauge etc.) 1. PLAIN PLUG / WIDTH/ DEPTH/ Upto 100 mm 1.9 µm Using Electronic FLUSH PIN GAUGE DIAMETER /WIDTH / DEPTH $ 100 mm to 300 mm 3.8

LIST OF PLANT & MACHINERY

LIST OF PLANT & MACHINERY We have following machines installed at our premises: SL.No Description Make Rating/Cap Qty Year of Purchase 1 CNC/Vertical Milling Centre BFW Bed Size-(X-600, Y- 450, Z-700)

Accurate Measurements, Plot No.103, D Block, Meethapur Ext., Badarpur, New Delhi. Discipline Mechanical Calibration Issue Date

Last Amended on 11.11.2014 Page 1 of 6 I. DIMENSION 1. Dial/ Digital Vernier Caliper $ L.C.: 0.01mm Φ 0 to 200 mm 7.5 µm Using Slip Gauge Set & L.C.: 0.01mm Φ 0 to 300 mm 12.17 µm Using Slip Gauges & Caliper

80 PHONE SECTION 3 CUTTING ONSITE SUPPLY RENTAL & EQUIPMENT 1. PIPING 2. WORKSHOP MACHINERY SPECIALISED FORCE

3. 4. TORQUING & 5. WELDING 6. POWER TOOLS 7. HAND & ELECTRICAL TOOLS 9. LUBRICANTS & SEALANTS 10. TAPES & PACKAGING 11. SAFETY 13. CATERING 14. HARDWARE, & JANITORIAL FITTINGS & BUILDING 80 80 PHONE 1800

BEST OF 2015 January December

BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January

ONLY use MLR, Ast, or MST

2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive

UNESCO / Vocational Education Erbil and Dohuk

Item Code Item Description Unit Qty Destination Intended Use Carpentry machine, multi-function (7 mini), large 06-12-00001 size set 2 06-12-00002 90 cm band saw for carpentry with full Wood turning lathe

Small Tool Instruments and Data Management

Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281

Equipment available due to closure

Epec - Fabrication and Engineering Equipment available due to closure (Ends: 2017-02-15 14:00:00.0) Epec - Fabrication and Engineering Equipment available due to closure Lot 1 Renault Master CC LL 35 Dci

BEST OF 2014 January December

Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

台灣黑馬牌指示量表類 DIAL INDICATOR METROLOGY

C1 C2 C3 Dial Gages (Small Bezel Dia) DG-9003S DG-9004S DG-9005S DG-9003S DG-9004S 0-3mm 0-4mm ψ40mm Aluminum Body ψ36mm Aluminum Body DG-9005S 0-5mm ψ40mm Aluminum Body Dial Gages (Normal) DG-9010A DG-9010R

200 m IP67. Partner for specialist retailers. Precision Offers. In Germany at home in demand worldwide. valid until

3 1 4. 9 4 5 20.- L E st! A S s la n O tock w hile s 200 m m IP67 Partner for specialist retailers Precision Offers In Germany at home in demand worldwide valid until 31.08.2016 1 CALIPERS Pocket vernier

Cal-Tech Calibration Services Pvt. Ltd., Flat No.8, Avadhut Heights, Anand Nagar, Sinhgad Road, Pune, Maharashtra

Last Amended on - Page 1 of 5 I. DIMENSION 1. CALIPER $ L.C. :-10 µm 0 to 300 mm 12.0 µm Using Caliper Checker; Gauge 0 to 1000 mm 12.0 µm Block Set L.C. :-20 µm 0 to 600 mm 16.0 µm 0 to 1000 mm 20.0 µm

$ Ex. GST $

SALE ENDS 31/12/08 LOOK INSIDE FOR MORE GREAT GIFT IDEAS! Apprentice Tool Chest 151 Piece 6 Drawer This fantastic 151 Piece Apprentice Tool Kit is ideal for the New Apprentice Including all the tools you

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Convincing arguments: quality, efficiency and price Direct-SSBF MT 2 3050571 MT 2 3050572 MT 3 3050573 MT 4 3050574 Precision-SSBF 0-8 mm 3050608

+91-8048718949 Bearing & Tools Centre http://www.measuringtestinginstrument.com/ We are a renowned dealer and supplier of a wide assortment of precision engineered testing and measuring equipment. Our

Directorate of Technical Eduaction Rajasthan Jodhpur PROCUREMENT SCHEDULE FOR TOOLS,EQUIPMENTS & MACHINERY

JULY. AUG. SEP. OCT. NOV. DEC. JAN. FEB. MAR. APR. MAY. JUNE. Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized JULY. AUG. SEP. OCT. NOV.

OCCUPATIONAL TOOLS AND EQUIPMENT LIST

OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES

NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY VADAPUDUPATTI, THENI DEPARTMENT OF MECHANICAL ENGINEERING LAB FACILITIES S.No 1 Name of the Laboratory ENGINEERING PRACTICES Total Area of Lab 62.0

Year , Labour Department, Puducherry. Page 1 of 6

Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized SCHEDULE FOR PURCHASED ITEMS GOVERNMENT OF PUDUCHERRY Government I.T.I. (Men), T.R.Pattinam,

Solar Trike w i t h A C C U b a t t e r y d r i v e a n d LED lighting

1.693 Solar Trike w i t h A C C U b a t t e r y d r i v e a n d LED lighting Necessary materials Fretsaw with metalworking blade drills. dia. 3,, 6, 7, Machine vice with soft jaws Soldering iron, solder

Clamping Tools

Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves

.4 hp Die Grinders & Disc Sanders

.4 hp Die Grinders & Disc Sanders NEW Lightweight Ergonomic Design! Reorder No. D12.14 Ideal for Rapid Material Removal, Sanding, Deburring, Finishing Right Angle, 7 Offset & Angle-Head s Plus Angle-Head

Upgradation of ITIs into Centers of Excellence-Broad guidelines for implementation of the Broad Based Basic Training in Automobiles Sector.

Upgradation of ITIs into Centers of Excellence-Broad guidelines for implementation of the Broad Based Basic Training in Automobiles Sector. These Centres will be providing multiskill training to meet the

121 indexable. Butt WelDeD tools. Die heads & chasers. restorers. Page Page sheet & tube Drills. Drills. Page Page...

group 010 Butt WelDeD tools group 016 Die heads & chasers group 017 thread restorers Page...........................18 Page...........................19 Page...........................19 group 019 sheet

Description. Lot no. Page 1 of 21

A.M.A Plastics Partnership (Ends: 2018-02-14 14:00:00.0) Online Auction of Machinery and Equipment no longer required by A.M.A Plastics Partnership ------------------------------------------------------------------------------------------------------------------------------

Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date

Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR

Universal Cutter Grinder ORDER NO.U2 CODE NO

Universal Cutter Grinder ORDER NO.U2 CODE NO.1022-001 For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiused cutters or negative

MARCH APRIL MAY 2007

MARCH APRIL MAY 27 ON SALE 1/3/6 UNTIL 31/5/6 OR UNTIL SOLD GARDEN CART 3 Kg CAPACITY 12 X 6 X 245mm 2 PIECE HANDLE ATTACHS TO A RIDE ON MOWER 13 PNEUMATIC WHEELS AIRLESS SPRAY GUN 1 LT/65W/24VOLT SPRAYS

BEST OF A selection of our most popular products. To view the complete range visit

BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

Ph: 1-(800) or (204) Fax: (204) Website:

JUST ARRIVED! Sahinler Press Model AP 1520-150 165 Ton Pressing Force 12 Stroke 60 Working Width 3/8 Bending Capacity (Punch and 4 Way Die Included) 24 x 60 Bed Area 15 HP Motor 220/3/60 New sells for

CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED

CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED 2 ADDRESS PLOT NO 2, OPP. ULTRATECH CEMENT FACTORY, NR. TELEPHONE EXCHANGE, NARODA GIDC ROAD, NARODA, AHMEDABAD 382330. GUJARAT, INDIA. 3

TOOLS & DEVICES FOR MAINTENANCE OF ELECTRICAL MACHINES

PREVENTION TOOLS & DEVICES FOR MAINTENANCE OF ELECTRICAL MACHINES Preventive maintenance of slip rings and commutators MAINTENANCE TOOLS & MEASURING DEVICES ECONOMY SECURITY Regular controls reduce the

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10

Industrial Tooling Corporation Ltd. Product Catalogue Issue 10 Company Profile Company Profile ITC is a round tool specialist. Our objective is simply to provide you, our customer, with the correct cutting

ARDUINO WORK BENCH - PART LIST

Nº Commercial Name ARDUINO WORK BENCH - PART LIST Qty. Price [ ] /unit 1 Storage plastic box (15L) 1 4.50 4.50 all Supplier The box (closed volume, insulated, transparent, thick wall but easy to pierce

THe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products

THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit

Standard Knockout Punches 10. Punch Kits for Hydraulic Drivers 11. Draw Stud Selection Guide 13, 14, 18. Special Shape Punches

8 Punching Tools, Hole Saws, Step Bits Page Punching Tools Standard Knockout Punches 10 Slug Buster Knockout Punches 10 Slug Splitter Knockout Punches 10, 12 Punch Kits for Hydraulic Drivers 11 Draw Stud

FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)

FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK

UNISON CORPORATION. DedTru Centerless Grinding Product Line

Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

Pneumatic Axial Die Grinder also for Underwater Use Type , 0050

M a s c h i n e n f a b r i k G m b H Pneumatic Axial Die Grinder also for Underwater Use Type 1 5077 0010 0020, 0050 Illustration can differ from the original Repair Manual and Compiled: 18.07.11 150770010_0020_0050_Inst_en_Version_00

Technical Specification

Our plasma can cut 0.3-30mm; our oxygen can cut 5-150mm Our machine can both cut by plasma and oxygen Quotation details Main parts Delivery time: Package: Shipping Warranty: 1500*3000mm/1500*2500mm working

HSS ground for steel to 900 N/mm 2, aluminium alloys, brass, bronze. Use For producing screw through-holes DIN EN 20273,

Drilling Tools Step drills 184 Step drills T - Countersink angle - With straight shank - Cone envelope grind - Web-thinned chisel edge and surface treatment For producing threaded core holes and countersinks

equipment December January 2015 Prices do not include freight. Specifications, prices & availability are subject to change without notice.

December 2014 - January 2015 WWOORRKKSSHHOOPP equipment 3 A351.25 7 9 B006 3.95 34 1,0 4 44 85 11. W 8 68 81 53 121 M.45 5 3 3,4 L6.45 1,6 0 40 D1.25.50 159 A368 6 0 T738 19 A 34.35 70 92. 9.60 6 3 L107

EQUIPMENT LIST. Square Footage: Main Plant = 96,850 South Building = 12,600. Main Plant. South Bldg

Main Plant South Bldg EQUIPMENT LIST Square Footage: Main Plant = 96,850 South Building = 12,600 2411 Walker Avenue, N.W. Grand Rapids, Michigan, USA 49544-1301 Phone: (616) 453-5471 Fax: (616) 453-3765

Industrial. Tools. The Ultimate Power Tools

Industrial Tools The Ultimate Power Tools Grinders CP offers the widest range of grinders and sanders to cater to a variety of applications from surface finishing die contouring and repairs to heavy duty

THE WARREN WORK TABLE

THE WARREN WORK TABLE Size - 24" x 30" x 36" Height is adjustable 30" to 36" Weight capacity - 800 lbs. Top - ⁵ ₁₆" HR Steel Frame - 2" x 2" x ¹ ₄" angle Shelf - 11 gauge HR Steel Wheels - Casters With

PRICE BID T Supply of various Tools & Tackles for TPS Ukai.

GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 900:008, ISO 00:00 and OHSAS 800:007 CERTIFIED THERM AL PO WE R ST A TION, U K AI U K A I D A M 9 8 0, D I S T R I C T : T A P I Phone : 0 -, Fax : 0-00

Model. Reach into areas as small as 3/8". Model. Max. Air Flow SCFM (L/Min)

The Dynafile Original The Best Tracking Abrasive Belt Tool in the World! 14000 For 24" Long Belts World-famous Dynafile replaces tedious hand filing and sanding. Grind, deburr, blend, polish, finish and

Fastener Drive & Screwdriving

www.irwin.com Fastener & Screwdriving tools Manufactured for Strength and value industry-specific Screwdriver Bits Fastener heads are often designed for the particular needs of specific applications and

Electrician Construction

Lab Specifications Electrician Construction An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 Shri Narendra Modi Honourable

Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders

Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full

Tkcyiqj lahkkx %& lkexzh tks dz; dh tkuh gsa lalfkk dk uke %& vks ksfxd izf k{k.k lalfkk eamyk (Upgradation +COE )

Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Tkcyiqj lahkkx %& lkexzh tks dz; dh tkuh gsa isdst dk uke %& -QuhZpj isdst dzekad %&

DRILL CHUCKS AND ARBORS

DRILL CHUCKS AND ARBORS ABOUT US We are leading manufacturer of Geared Type Drill Chucks with s and Arbors since 1944 - manufacturing wide range of our products in various sizes. We manufacture them under

Lab Specifications. Automotive 2 Wheeler Repair

Lab Specifications Automotive 2 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the

Discipline Mechanical Calibration Issue Date Certificate Number C-0751 Valid Until Last Amended on

Last Amended on 10.03.2016 Page 1 of 5 I. DIMENSION 1. Vernier caliper $ 0 to 300 mm/0.01 mm ± 12.0 µm Using Caliper Checker 0 to 300 mm/0.02 mm ± 16.1 µm Using Caliper Checker 0 to 600 mm/0.01 mm ± 14.0

ELECTRIC POWER TOOLS SIM180

New Products ELECTRIC POWER TOOLS SIM180 7 Polisher SIM115 4 1 / 2 Angle Grinder Voltage - 230v Frequency - 50hz Rated Power - 1300w Electronic Speed Control Maintains Constant Speed Under Load Soft Start,

DATE SUPPLY OF TOOLS & EQUIPMENT TENDER NOTICE

DESCRIPTION NOTIFICATION NUMBER ISSUE DATE CLOSING DATE SUPPLY OF TOOLS & EQUIPMENT IGRUA/BS/TOOLS&EQUIP/12-13/014 21/11/2012 14/12/2012 TENDER NOTICE Indira Gandhi Rashtriya Uran Akademi, Fursatganj Airfield,

Model FF8000 Flange Facer

Model FF8000 Flange Facer Machine Features Components & Accessories Specifications Technical Data Portable Machine Tools, Inc. Get big flange faces back in working condition - FAST! FF8000 Features Versatile

More Detail about Helical & Bevel Helical Reduction Gear Boxes.

More Detail about Helical & Bevel Helical Reduction Gear Boxes. For Inspection & Checking of these Housings we have Brown & Sharpe (USA) CNC CMM with full automatic rotating Renishaw Probe Head with Inspection

INDUSTRIAL WIRE BRUSHES

INDUSTRIAL WIRE BRUSHES HIGH PERFORMANCE POWER BRUSHES Technical Information Power brushes have long been used for edge and surface conditioning on a wide variety of materials. Unlike grinding wheels and

the equipment specialists

WORKSHOP ~ INDUSTRIAL ~ AUTOMOTIVE ~ STORAGE ~ ENGINEERING ~ AND MORE TRADEQUIP SALE VALID NOV / DEC 2010 ALL PRICES INCLUDE GST and the equipment specialists 270W 3 Speed Motor Stay Cool This Summer!

OFFICE OF THE PRINCIPAL, GOVT. INDUSTRIAL TRAINING INSTITUTE,

OFFICE OF THE PRINCIPAL, GOVT. INDUSTRIAL TRAINING INSTITUTE, MATHILI, AT/PO: MATHILI, DIST: MALKANGIRI (ODISHA) PIN-764045 Email: principalitimathili@gmail.com No 104 /ITIMathili Dated 05.05.2015 QUOTATION

Ergonomic design for comfort. Reduced vibration. Twin hammer impact mechanism. Part No. Maximum Torque Free Speed Weight Ave Air Consumption

3/8 Impact wrench The smallest in PCL s range of Prestige Impact Wrenches. The 3/8 Impact Wrench is designed for professional heavy duty use, with an ergonomically designed soft grip handle and a lightweight

Lab Specifications. Automotive 4 Wheeler Repair

Lab Specifications Automotive 4 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the

Compatibility overview of accessories for drilling machines

Compatibility overview of accessories for drilling machines Accessory items for drilling B13 B14 B16 B20 B25 B32 RB 6T RB 8S B17 Pro B23 Pro/Vario B26 Pro/Vario B33 Pro/Vario B16 H/Vario B24 H/Vario B28

Gauge Blocks - Reference for Precision

ß Measuring and Laying-Out Tools, Testing Instruments Gauge Blocks - Reference for Precision Parallel gauge blocks in compliance with DIN EN ISO 650 are supplied in the following calibration and tolerance

THONBURILOHA ENGINEERING COMPANY PROFILE

THONBURILOHA ENGINEERING COMPANY PROFILE ก 19. 30 ก ก ก. 10140. 02-4271471, 02-4275625, 02-4277757 FAX. 02-4277820 ก / ก ก ก. ก ก ก ก ก 42 ก ก ก ก ก ก ก 4 8 ก 20 ก ก ก ก ก ก Managing Director ก THONBURILOHA

all around precision

all around precision PG Mini Small, universal, but above all absolutely precise: PG Mini, a new line of tools and accessories designed to meet every working need. Cutting, sanding, smoothing, drilling,

BEVELLING MACHINES WELDING CARRIAGES

BEVELLING MACHINES WELDING CARRIAGES 2013 CATALOGUE www.trademastertools.com 1 BEVELLING MACHINES page 4 BM21 PORTABLE BEVELLER BM21S STAINLESS STEEL BEVELLER Single milling head with 10 indexable inserts

ACCREDITATION FACILITY AUDIT CHECKLIST

ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)

Sheet metal work 78 Slitting Shears 80 Sheet Metal Shears 83 Nibblers 86

FEIN General Catalog 2018/2019 Welcome to FEIN In the new FEIN General Catalog 2018, you ll find our complete range of professional and extremely reliable power tools for trades and industry. Designed

Central Mechanical Engineering Research Institute, Mahatma Gandhi Avenue, Durgapur, West Bengal

Last Amended on 23.09.2014 Page 1 of 9 I. DIMENSION 1. GAUGE BLOCKS $ 0.5 mm to 25 mm 25 mm to 50 mm 50 mm to 75 mm 75 mm to 100 mm 2. LENGTH BAR $ Upto 300 mm 300 mm to 600 mm 300 mm to 1000 mm 0.11µm

PNEUMATIC TOOLS VER MADE IN JAPAN. SAITAMA SEIKI CO. LTD., Saitama, Japan

PNEUMATIC TOOLS MADE IN JAPAN VER. 2018-2 SAITAMA SEIKI CO. LTD., Saitama, Japan PNEUMATIC TOOLS / AIR TOOLS INDEX -1- PAGE MODEL DESCRIPTION NOTE 1 IMPACT WRENCHES - 3/8", 1/2", 3/4" squre drive AK-135

RECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2

RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)

OFFICE OF THE PRINCIPAL ITI MALKANGIRI At-Pradhaniguda, Dist-Malkangiri Ph no

OFFICE OF THE PRINCIPAL ITI MALKANGIRI At-Pradhaniguda, Dist-Malkangiri Ph no-06861 211244 No 355 dt 19.11.13 QUOTATION CALL NOTICE Sealed Quotation are invited from the reputed firm for supply of Tools

Government of Jammu and Kashmir Industrial Training Institute Kupwara

Government of Jammu and Kashmir Industrial Training Institute Kupwara ABBREVIATED TENDER NOTICE Industrial Training Institute Kupwara intends to purchase different Machinery Equipments and Tools for Electrician,

SG9MTS Cylinder Head Seat & Guide Machine

SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER

Auction Catalog. Auction Date:

Auction Catalog Satowfi Machining Solutions LLC. Auction Date: Thursday, July 26, 2018 Lots Start Closing: 10:00 AM MST KD Auctions 7918 E.McClain Dr. Suite 101 Scottsdale, AZ 85260 Phone: (480) 455-3910

Jeff Bub Auctioneer. Metal Fabricating Auction Surplus

Jeff Bub Auctioneer Metal Fabricating Auction Surplus Mitsubishi IXP laser, Accupress 80 ton press brake, Power rolls, Bridgeport mill, Dust collector, Mig welders, Rotary table, Grinder, Tooling & more

MANITOWOC TOOL AND MANUFACTURING, LLC

MANITOWOC TOOL AND MANUFACTURING, LLC World-class performance that makes a world of difference. ISO 9001 Registered FACILITY LIST 4330 Expo Drive Manitowoc, WI 54220 Phone: (920) 686-8232 Fax: (920) 686-8237

Service INFO Calibration. Tool repair service of thread gauges. Calibration

Service Tool repair service -2 Calibration of thread gauges -16 Regrinding service -5 Calibration of plain gauges -17 Coating service -8 Calibration of appliances -19 INFO ISO 90 ff test equipment monitoring

Super. Line. 10th Edition SUPER PRICE SUPER QUALITY SUPER AVAILABILITY

Super Line SUPER PRICE SUPER QUALITY SUPER AVAILABILITY 10th Edition High-tech tools at a super price convincing price-performance-ratio exceptional quality immediate availability customer-friendly service