reciprocating cam with half-cycle safety overload mechanism permits adjustable

Size: px
Start display at page:

Download "reciprocating cam with half-cycle safety overload mechanism permits adjustable"

Transcription

1 Acceleration of flying shear. device reduces initial , 105 Adjusting mechanism, three-axis Arcs with inaccessible centers, plotting circular Assembly machine, mechanism for orienting pins in Assembly operation mechanized Backlash. dial's moving witness mark compensates for dual gear train diminishes eliminated by torque filter Bag-folding device, eccentric gears feature of , 251 Bag-making machine, rapid intermittent and reciprocating movement of rack in Ball bearing serves as planetary reduction gear Ball.clutch, overload slipping Bead chain drive turns shaft on moving perpendicular axes Boring.bar, moving supports for long Bottle caps, designing hopper feeds for Brake, three-speed gear conversion unit for bicycle coaster Cam-actuated mechanism for varying spacing in weave of woven-wire product Cam, and link system produces varying rotation rate and ratchet intermittent mechanism , 64 change of tuning of , 411 controls stock feed of wire-forming machine crank-driven plate obtains near-uniform velocities through compensating drives glue-transfer mechanism eliminates shock in rack movement intermittent motion from

2 474 INDEX Cam. which produces motion on alternate revolutions with half-cycle dwell Cam-controlled differential mechanism , 410 Cam-jaw chucks for twisting rod Cam-operated stock clamp for piercing and blanking dies Cam timing, gear mechanism for varying... 20, 21 Centerless grinding machine with automatic feed mechanism with quick-return motion Chain and levers increase movement , 177 Chain drive mechanism, intermittent rotary movement from linear movement reduced by differential produces continually variable rotation turns shaft on moving perpendicular axes Chucks for twisting rod, cam-jaw Circular arcs with inaccessible centers, plotting Circular motion into variable reciprocating movement, con-.. verting wcillating Clamp for piercing and blanking dies, cam-operated stock Clamping and indexing mechanism for drill jigs Clamping mechanism for cylinder boring fixture, airoperated..., 141 Clamping work at four points with toggle-action drill jig , 136 Clamp with wide work capacity, quick-acting Clutch, adaptable to various dwell periods and gear mechanism for variable operating conditions automatically disengaged after required number of strokes one-half turn trip , 429 positive-action one-revolution , 432 tape drive slip , 421 two-revolution which permits reversal of driven shaft , 288 Coil-winding machine, sensitive feed arrangement for , 146 Cold-roll forming machine, reducing initial acceleration of flying shear on a , 105 Compensating device for height gage, pitch-error Conveyor belt ratchet mechanism Copying lathe, hydraulically operated cross-slide for a piloted feed control mechanism for a

3 INDEX 475 Copying system controls two lathe tools. hydraulic... : Counter with dwell interval operated through slotted discs Counting device for high speed operation Coupling connects displaced shafts Crank, constant horizontal velocity from a controls shuttle between supply and discharge chutes provides a dwell in reciprocating motion , 205 Crank-driven plate obtains near-uniform velocities through compensating cam Cross-slide for a copying lathe, hydraulically operated Cutting-off machine with one-revolution clutch with positive action , 432 Cutoff device, high-speed Cylinders fed one at a time down a ramp Cylindrical parts, transfer device for Deep-hole drilling machine. feed system for a , 351 Die.cutting, machine "stops" roll labels momentarily for highspeed of developed form Differential chain drive mechanism, linear movement reduced by Differential mechanism, cam-controlled , 410 Differential screw assembly for a slide , 298 Disostacking device , 125, Displaced shafts, coupling connects Drawing dies, adjusting size of "iris" Drilling machine, feed system for a deep-hole , 351 Drilling parallel rows of holes Drive, direction-changing for reciprocating members with varying relative motion for two slides with partially synchronized travel functions around roller chain , 182 gives variable output automatically prevents reverse movement of driven shaft produces continually variable rotation with reverse-locking feature , 120 Drive direction, unidirectional rotation regardless of changes in

4 476 INDEX Driven shaft. changing of timing of , 414 driving mechanism prevents reverse movement of Drive-shaft actuates slide at variable speed and stroke, oscillating Dwell, adjustable indexing mechanism with 180-degree adjustments facilitated by lever type driving mechanism clutch adaptable to various periods of in reciprocating motion , 205 operated through slotted discs...? reciprocating cam with half-cycle safety overload mechanism permits adjustable Eccentric. adjustable , 220 driving mechanism permits stroke adjustment during operation ,221 gears feature of bag-folding device , 251 produces a variable throw , 224 provides adjustable die stroke provides rest interval rapid return and dwell period provided by spring-load ed... 20(r202 Ejection system for punch press, self-contained pneumatic End-cycle reversal, intermittent rotary movement with Epicyclic gear train which produces multiple revolutions p76 Escapement mechanism, feeds cylinders one at a time down a ramp feeds rods of various diameters , 328 provides regular intermittent drive with pendulum Feed arrangement. for bottle caps for coil-winding machine , 146 for square and hexagonal nuts for strip material , 363 for surface grinder , 318 Feed control mechanism, piloted Feeding and sorting shells closed end first Feeding of cylinders one at a time down a ramp Feeding rods of various diameters, escapement mechanism for , 328

5 INDEX 477 Feeding wrappers at constant pressure Feed mechanism, designed to eliminate manual reengagement for small headed parts , 331 improves efficiency of thread roller (t jamproof" punch press quick-return motion Feed system for a deep-hole drilling machine , 351 Flying shear, device reduces initial acceleration of , 105 Fool-prooi indexing mechanism Forming press, cam for producing motion on alternate revolutions of a Gage. pitch-error compensating device for height Gear conversion unit for bicycle coaster brake, three-speed Gear drive, produces variable output motions springs cushion shock loads in variable intermittent movement derived from... 60, 61 Geared five-bar linkage for straight-line motion , 168 Geared speed reducer changeable under load Gear-grinding screw, wheel-dressing attachment for a Gear mechanism, for variable operating conditions for varying cam timing Gear ratios control motion time, Geneva drive in which Gears feature of bag-folding device, eccentric , 251 Gears in transmission line increase shaft oscillation , 255 Gear-shift control for speed-change mechanisms, hydraulic , 295 Gears which facilitate change of timing of driven shaft, sun , 414 Gear train, diminishes backlash produces multiple revolutions Geneva drive, blocking device for a... 78, 79 gear ratios control motion time in a half revolution reversing two-speed sprocket operated , 246 Glue-transfer mechanism, single closed-track cam drives Governor, for handwheel of lathe tailstock instant acting centrifugal

6 478 INDEX Grinding machine. fine feed arrangement for a surface , 318 gyroscopic setup for a with automatic feed mechanism with quick-return motion with table feed mechanism designed to eliminate manual reengagement Gun barrel boring.bar, moving supports for long Gyroscopic grinding setup Handling mechanism turns strip in transfer Harmonic motion, oscillating shaft driven with simple , 200 Height gage, pitch-error compensating device for Homogenizer, unique pumping mechanism applied to a , 198 Hopper feeds, for bottle caps for square and hexagonal nuts Hydraulic gear-shift control for speed-change mechanisms , 295 Indexing. rotary work-table with mechanism for automatic Indexing attachment. pi-ratio universal rack that controls ratchet operation Indexing die for piercing drawn sheet-metal parts Indexing fixture, ratchet and two pawls control movement of Indexing mechanism, fool-proof for drill jigs high-speed with 180-degree dwell, adjustable Indexing movement that starts without shock... 29, 30 Intermittent and pressure applying mechanism Intermittent and reciprocating movement in a rack Intermittent drive, escapement provides regular with reverse-locking feature , 120 Intermittent feed for strip material , 363 Intermittent mechanism, cam and ratchet... 63, 64 Intermittent motion, from continuously rotating shaft from gear drive from two synchronized cams Intermittent ratchet mechanism, adjustable...~~~~~~~ Intermittent rotary movement, chain driven for instrument pointers with end-cycle reversal

7 INDEX 479 Intermittent rotary movement. with linear movement Intermittent speed change, sun and planet gears produce Intermittent variable-speed movement , 319 Intermittent worm-gear train... 27, Jamproof" feeding mechanism Jigs, clamping and indexing mechanism for drill Jig that clamps work at four points, toggle-action drill , 136 Latch mechanism. instant-release Lathe, hydraulically operated cross-slide for a copying hydraulic copying system controls two tools piloted feed control mechanism for a copying pressure governor for handwheel of tailstock swing stop for automatic Lead-screw pitch errors, mechanism compensates for , 452 Lever driving mechanism , Levers, and chain increase movement , 177 straight-line motion through Lineal travel, linkage for combined or independent , 111 Linear and rotary movement, intermittent Linear feed with adjustable stroke, reversing Linear movement reduced by differential chain drive mechanism Linkage, for combined or independent lineal travel , 111 for straight-line motion , 168 replaces ball bearings , 247 replaces three gears Link and cam system produces varying rotation rate I Lock for reciprocating slides, variable stroke and quickaction Locking feature, intermittent drive with reverse , 1120 Magazine feeds wrappers at constant pressure... 33&40 Mandrels, mechanism for varying rotation of winding Materials-transfer mechanism that turns strip Mounting that provides double action for compression spring 109, 110 Nuts. designing hopper feeds for square and hexagonal

8 480 INDEX One-half revolution.-on e.half pause mechanism , 429 Oscillating circular motion into variable reciprocating movement, converting Oscillating drive-shaft actuates slide at variable speed and stroke Oscillating movement, from rotating shaft from uniform angular velocity , 260 Oscillating shaft, driven with simple harmonic motion...l99, 200 increasing the movement of an , 256 Oscillation, gears in transmission line increase shaft , 255 Oscillator, pneumatically actuated mechanical Output motions, two-gear drive produces variable Overload mechanism permits adjustable dwell on reciprocating drive Overloads, safety devices protect slides against Overload slipping ball-clutch Overriding of remotely controlled lever, simple device allows manual Over-running drive, cylinder ratchet mechanism for Packaging machine. which increases movement by levers and chain , 177 which obtains intermittent motion from two synchronized cams Paper-converting machine with constant horizontal velocity from a crank Pawls and ratchet control movement of indexing fixture Pickup extender obviates lifting heavy stacks, vacuum Piloted feed.control mechanism Pins in assembly machine, mechanism for orienting Pi-ratio universal rack-indexing attachment Pitch errors, compensating device for height gage mechanism compensates for lead-screw , 452 Planet and sun gears produce intermittent speed change Planetary reduction gear, ball bearing serves as Pneumatic ejection system for punch press, self-contained Pointers, intermittent rotation for instrument Positioning of work-transfer arm mechanism for rotary... 35&358

9 INDEX 48 1 Pressure applying mechanism. intermittent and Printing press, adjustable indexing mechanism finger holds down paper stack on shaft driven with simple harmonic motion , 200 simple device reciprocates rotating roll vibrating roll drive for fountains on , 278 Programming by ratchet wheel, automatic Pumping mechanism applied to a homogenizer...? , 198 Punch press, feed mechanism for self-contained pneumatic ejection system for Quick-return motion. automatic feed mechanism with Rack-indexing attachment. pi-ratio universal Rack movement, cam for eliminating shock in Railroad car wheel lathe, hydraulic copying system controls two lathe tools for Ratchet mechanism, additive and subtractive... 56, 57 adjustable intermittent controls cut-off length of sheets controls movement of indexing fixture designed for cylinder operation for feeding wire screening for over-running drive intermittent cam and... 6% 64 two-speed double.adion with forward and reverse movements Ratchet operation, indexing attachment that controls... A7-20 multiple-revolution on alternate strokes... 58, 59 Ratchet wheel, automatic programming by Reciprocating and intermittent movement in a rack Reciprocating cam with half-cycle dwell Reciprocating drive, functions around roller chain , 182 safety overload mechanism permits adjustable dwell on Reciprocating members with varying relative motion, drives for Reciprocating movement, converting oscillating circular motion into variable

10 482 INDEX Reciprocating movement. from one source to two slides from uniform rotation , in synchronism on a single shaft...~~~~~~~~ of grinding wheel obtained from high-speed drive , 167 safety attachment designed for a varying Reciprocating rotating printing roll Reciprocating slide, adjustable-stroke driving mechanism Reciprocating strokes for one, generating two Reciprocating traversing device with an adjustable stroke Reciprocations with one drive-shaft revolution, two Reduction gear, ball bearing serves as planetary Release for tapping, torque-controlled drive Release for thread cutting, automatic half-nut Release latch mechanism, instant Rest interval, modified eccentric provides (see also Dwell) Return and dwell period provided by spring-loaded eccentric Reversing mechanism, excessive-torque , 147 Reversing shaft-traversing device replaces troublesome cam, instantaneous Reversing traverse mechanism, adjustable Reversing two-speed Geneva drive... 15&152 Roll drive for printing press fountains, vibrating...~~~~~~~~ 277, 278 Roller chain, pressing pins into side plates of cotter-pin Rotary and linear movement, intermittent Rotary motion from continuous to oscillating, converting , 248 Rotating and sliding mechanism used in polishing rectangular frames Rotation, adjustable drive produces continually variable Rotation rate, cam and link system produces varying Safety attachment designed for a reciprocating movement Safety devices protect slides against overloads Safety overload mechanism permits adjustable dwell on reciprocating drive Scanner, high-speed spiral Scrap-stripping device, rotary

11 INDEX 483 Screw assembly for a slide, differential , 298 Shaft oscillation increased by gears in transmission line ,255 Shock absorber for a rotating shaft Shock in rack movement, cam for eliminating Shockless indexing movement... 29, 30 Shockless startup of inertia , 105 Shock loads in gear drive, springs cushion Simple harmonic motion, oscillating shaft driven with ,200 Slide motion differential Slides, adjustable-stroke driving mechanism reciprocating differential screw assembly for ,298 driven with rapid variable strokes imparting variable and unequal strokes to opposed reciprocating operated longitudinally and one also crosswise reciprocated in synchronism on a single shaft nininininini with automatic reversal and adjustable stroke ,239 Sliding and rotating mechanism used in polishing redangular frames Sorting and feeding shells closed end first Speed-change mechanisms, hydraulic gear-shift control for ,295 sun and planet gear Speed measurement, synchronizer that insures precise Speed reducer, changeable under load shaft-mounted ,282 Spindle-quill travel, remote control presets Spiral scanner, high-speed Spring, mounting provides double action for compression ,110 Sprocket operated Geneva drive provides wide design possi-... b111tles ,246 Stacking device, disc ,125, Steplessly variable stroke movement , 226 Stock feed of wire-forming machine controlled by a cam Stop for automatic lathe, swing Stoppage for high-speed die-cutting, momentary Straight-line motion, geared five-bar linkage for J67, 168 through levers Straight-line reciprocation from uniform rotary motion, variable

12 484 INDEX Strip material. intermittent feed for turned in transfer Stroke adjustment during operation, eccentric driving mechanism permits , 221 Stroke and dwell adjustments, lever type driving mechanism permits Strokes, fixed converted into variable generating two from one reciprocating imparting variable and unequal modified eccentric provides adjustable die slide with automatic reversal and adjustable , 239 two opposed slides driven with rapid variable Sun and planet gears produce intermittent speed change Sun gears which facilitate change of timing of driven shaft , 414 Surface grinder, fine feed arrangement for a , 318 Swing stop for automatic lathe Synchronized cams, intermittent motion from two , 33 Synchronized travel, common drive for two slides with partially Synchronizer that insures precise speed measurement Tape drives. slip clutch suitable for , 421 Tape reel has quick action and constant gripping pressure.-a Tappet screws, mechanism for checking the torque of Tapping, torque-controlled drive release for Thread cutting, automatic half-nut release for mechanism that compensates for lead-screw pitch errors in 451, 452 Thread-grinding machine, mechanism that compensates for lead-screw pitch errors in , 452 Thread roller, semiautomatic work feeder improves efficiency of Throw, adjustable eccentric produces a variable , 224 Timing of cam changed while machine is in motion , 411 Timing of driven shaft changed while running , 414 Torque checking of tappet screws Torque filter eliminates backlash Transfer and reversal of pad position, simultaneous Transfer device for cylindrical parts Transfer of small parts from one chute to two chutes

13 INDEX 485 Transmission remotely controlled by triple-action cylinder Transmitting uniform speed between shafts having variable centers Transversing device with an adjustable stroke, reciprocating..l Unidirectional rotation regardless of changes in drive.. direction Uniform rotation, variable reciprocating motion derived from Variable and unequal strokes imparted to opposed reciprocating slides Variable reciprocating movement, converting oscillating circu-.. lar motion into Variable stroke movement, steplessly ,226 Varying cam timing, gear mechanism for... 20, 21 Warp machine counter with dwell interval operated through slotted discs Wheel-dressing attachment for a gear-grinding screw Winding head for skeins of embroidery floss Wire-bending machine, with common drive for two slides with partially synchronized travel with gear and clutch mechanism Wire-coiling machines, tension regulating device for ,461 Wire ends, mechanism for looping and twisting Wire fabricating machine, chain driven intermittent rotary movement for with bead chain drive that turns shaft on moving perpendicular axes with gears in transmission line that increase shaft oscillation , 255 with two slides operated longitudinally and one also crosswise Wire-forming machine, cam controls stock feed of with driving mechanism which prevents reverse movement of driven shaft with intermittent motion derived from continuously rotating shaft with intermittent rotary movement with end-cycle reversal

14 486 INDEX Wire screening, interrupted movement of Work feeder improves efficiency of thread roller, semi-automatic Work-table with mechanism for automatic indexing, rotary Work-transfer arm, mechanism for rotary positioning of Work-transfer device, rotary d ,344 Worm drive gives variable output automatically , Wrapping machine, with lever type driving mechanism that permits stroke and dwell adjustments with two opposed slides driven with rapid variable strokes Worm-gear train, intermittent Wrappers fed at constant pressure

INDEX. PAGE Adjustment mechanism for radial position of block on rotating

INDEX. PAGE Adjustment mechanism for radial position of block on rotating INDEX Adjustment mechanism for radial position of block on rotating arm 520 Amplifying mechanism for precision measuring instruments--491 Angular movement, crank and link mechanisms for increasing 251,

More information

INDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts

INDEX. 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts INDEX Agitating device for pin hopper.----------------------------------------- 414 Agitator reversing mechanism which varies point of reversal. 250 Alternate and intermittent drive for two shafts.-----.----------.--..--

More information

TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces.

TYPICAL EXPERIMENTS Centers of gravity. Force triangle. Force polygon and Bow s Notation. Non- concurrent forces. MM 500-001 BASIC PANEL The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories

More information

DYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system.

DYNAMICS LABORATORY. AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. DYNAMICS LABORATORY AIM: To apply the knowledge gained in kinematics and dynamics of machines to real system. OBJECTIVES: To supplement the principles learnt in kinematics and Dynamics of Machinery. To

More information

Code No: R Set No. 1

Code No: R Set No. 1 Code No: R05310304 Set No. 1 III B.Tech I Semester Regular Examinations, November 2007 KINEMATICS OF MACHINERY ( Common to Mechanical Engineering, Mechatronics, Production Engineering and Automobile Engineering)

More information

Tel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.

Tel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM. Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump

More information

ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism)

ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) ME6401 KINEMATICS OF MACHINERY UNIT- I (Basics of Mechanism) 1) Define resistant body. 2) Define Link or Element 3) Differentiate Machine and Structure 4) Define Kinematic Pair. 5) Define Kinematic Chain.

More information

KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A

KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A KINEMATICS OF MACHINARY UBMC302 QUESTION BANK UNIT-I BASICS OF MECHANISMS PART-A 1. Define the term Kinematic link. 2. Classify kinematic links. 3. What is Mechanism? 4. Define the terms Kinematic pair.

More information

NOVAMATIC 2G / 4G. Internal Grinding

NOVAMATIC 2G / 4G. Internal Grinding NOVAMATIC 2G / 4G Internal Grinding GRINDING OF STRAIGHT TRACK AND TWO LIPS INTEGRATED ARTICULATED ROBOT FOR WORKPART LOAD AND UNLOAD NOVAMATIC 2G/4G Internal Grinding A range of high productivity internal

More information

MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech

MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech MECHANICAL IEEE PROJECT TITLES 2015 LeMeniz Infotech 36, 100 feet Road, Natesan Nagar(Near Indira Gandhi Statue and Next to Fish-O-Fish), Pondicherry-605 005 Web : www.ieeemaster.com / www.lemenizinfotech.com

More information

12/25/2015. Chapter 20. Cams. Mohammad Suliman Abuhiba, Ph.D., PE

12/25/2015. Chapter 20. Cams. Mohammad Suliman Abuhiba, Ph.D., PE Chapter 20 Cams 1 2 Introduction A cam: a rotating machine element which gives reciprocating or oscillating motion to another element (follower) Cam & follower have a line constitute a higher pair. of

More information

Multi-Purpose Milling Machine

Multi-Purpose Milling Machine Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,

More information

Mechanisms. Prepared by Juan Blázquez, Alissa Gildemann

Mechanisms. Prepared by Juan Blázquez, Alissa Gildemann Unit 9 Mechanisms 1. Mechanisms Mechanisms are devices that transmit and convert forces and motions from an input to an output element. They enable us to use less effort to carry out a task. We can classify

More information

St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad

St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad St.MARTIN S ENGINEERING COLLEGE Dhulapally, Secunderabad-500 014 Subject: Kinematics of Machines Class : MECH-II Group A (Short Answer Questions) UNIT-I 1 Define link, kinematic pair. 2 Define mechanism

More information

Changes in direction.! Using pulleys with belts

Changes in direction.! Using pulleys with belts Mechanisms Changes in direction! Using pulleys with belts Changes in direction! Using friction wheels Changes in direction! Using gears Worm drive! Reduces the speed! It is non-reversible Worm drive! Multiple

More information

What is a Mechanism?

What is a Mechanism? Mechanisms What is a Mechanism? A mechanism is the part of a machine which contains two or more pieces arranged so that the motion of one compels the motion of the others. Generally used to: Change the

More information

Driver Driven. InputSpeed. Gears

Driver Driven. InputSpeed. Gears Gears Gears are toothed wheels designed to transmit rotary motion and power from one part of a mechanism to another. They are fitted to shafts with special devices called keys (or splines) that ensure

More information

Instantaneous Centre Method

Instantaneous Centre Method Instantaneous Centre Method The combined motion of rotation and translation of the link AB may be assumed to be a motion of pure rotation about some centre I, known as the instantaneous centre of rotation.

More information

D & F Of Pneumatic Riveting Machine

D & F Of Pneumatic Riveting Machine PN-001 PN-002 PN-003 PN-004 PN-005 PN-006 PN-007 PN-008 PN-009 PN-010 PN-011 PN-012 PN-013 PN-014 PN-015 PN-016 PN-017 PN-018 PN-019 PN-020 PN-021 PN-022 PN-023 PN-024 PN-025 PN-026 PN-027 PN-028 Fabrication

More information

2. a) What is pantograph? What are its uses? b) Prove that the peaucellier mechanism generates a straight-line motion. (5M+10M)

2. a) What is pantograph? What are its uses? b) Prove that the peaucellier mechanism generates a straight-line motion. (5M+10M) Code No: R22032 R10 SET - 1 1. a) Define the following terms? i) Link ii) Kinematic pair iii) Degrees of freedom b) What are the inversions of double slider crank chain? Describe any two with neat sketches.

More information

FIRSTRANKER. 2. (a) Distinguish (by neat sketches) betweenpeaucellier mechanism and Hart mechanism.

FIRSTRANKER. 2. (a) Distinguish (by neat sketches) betweenpeaucellier mechanism and Hart mechanism. Code No: 07A51404 R07 Set No. 2 IIIB.Tech I Semester Examinations,May 2011 KINEMATICS OF MACHINERY Mechatronics Time: 3 hours Max Marks: 80 Answer any FIVE Questions All Questions carry equal marks 1.

More information

I -. CYLINDRICAL PRODUCTION GRINDING MACHINE

I -. CYLINDRICAL PRODUCTION GRINDING MACHINE I -.., CYLINDRICAL PRODUCTION GRINDING MACHINE The 21 U fnd 21 P series of grinding machines were designed specifically for grinding workpieces that require longer center distances than was formerly available

More information

Modern ManufacturingServices.LLC. Attachments And Auxiliary Equipment

Modern ManufacturingServices.LLC. Attachments And Auxiliary Equipment Attachments And Auxiliary Equipment Proudly Manufactured in the USA Modern ManufacturingServices.LLC 640 East Main Street Palmyra NY 14522 Phone 585-289-4261 Fax 585-289-7909 Unwinds And Folding Systems

More information

Theory of Machines. CH-1: Fundamentals and type of Mechanisms

Theory of Machines. CH-1: Fundamentals and type of Mechanisms CH-1: Fundamentals and type of Mechanisms 1. Define kinematic link and kinematic chain. 2. Enlist the types of constrained motion. Draw a label sketch of any one. 3. Define (1) Mechanism (2) Inversion

More information

TECHNOLOGY MECHANISMS

TECHNOLOGY MECHANISMS TECHNOLOGY MECHANISMS 3º ESO IES CHAN DO MONTE URTAZA 1 WHAT IS A MECHANISM? Mechanism are devices that have been designed to make jobs easier. They all have certain things in common: They involve some

More information

Product design: Mechanical systems

Product design: Mechanical systems Changing force and movement Levers Levers can be used to: increase force and decrease speed or distance travelled, as in a crowbar or wheelbarrow; Linkage systems 3-bar linkages are rigid, but by making

More information

H1600 Mechanical Overload Clutches HOR Series

H1600 Mechanical Overload Clutches HOR Series H1600 Mechanical Overload es HOR Series Section Contents FEATURES... 36 OPERATING PRINCIPLES... 36 SELECTION... 37 HOW TO ORER... 37 RATINGS AN IMENSIONS... 38 MOUNTING HOLE PATTERNS... 42 GENERAL INFORMATION...

More information

Mechanics and Mechanisms. What is do you think about when you hear the word mechanics? Mechanics. Is this a mechanism? 2/17/2011

Mechanics and Mechanisms. What is do you think about when you hear the word mechanics? Mechanics. Is this a mechanism? 2/17/2011 Mechanics and Mechanisms What is do you think about when you hear the word mechanics? Mechanics Mechanics is the study of how things move Is this a mechanism? Concerned with creating useful movement through

More information

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER

SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS (Click on the name to be taken to that section) Stocking Manufacturer of Quality Replacement Parts (815) 965-0884 Fax (815)965-1049 Welcome to the Quality

More information

1. (a) Discuss various types of Kinematic links with examples. (b) Explain different types of constrained motions with examples.

1. (a) Discuss various types of Kinematic links with examples. (b) Explain different types of constrained motions with examples. Code No: RR310304 Set No. 1 III B.Tech I Semester Supplementary Examinations, February 2007 KINEMATICS OF MACHINERY ( Common to Mechanical Engineering, Mechatronics and Production Engineering) Time: 3

More information

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA

BNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,

More information

CYCLICALLY OPERATING VALVES FOR MACHINES OR ENGINES (valves in general F16K)

CYCLICALLY OPERATING VALVES FOR MACHINES OR ENGINES (valves in general F16K) F01L CYCLICALLY OPERATING VALVES FOR MACHINES OR ENGINES (valves in general F16K) Valve-gear or valve arrangements, e.g. lift-valve gear; Lift-valve, i.e. cut-off apparatus with closure members having

More information

Product design: Mechanical systems

Product design: Mechanical systems Product design: Mechanical systems Recall Mechanisms can: change direction of movement, e.g. from clockwise to anticlockwise or from horizontal to vertical; change type of movement, e.g. from rotating

More information

R10 Set No: 1 ''' ' '' '' '' Code No: R31033

R10 Set No: 1 ''' ' '' '' '' Code No: R31033 R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DYNAMICS OF MACHINERY (Common to Mechanical Engineering and Automobile Engineering) Time: 3 Hours Max Marks:

More information

Question 8 Engineering Higher Level

Question 8 Engineering Higher Level Rack and Pinion Rotary motion to linear motion As pinion rotates, gear teeth mesh with those on rack Applications: Lowering table on pillar drill ; Steering in Car Worm and Worm wheel Transmits power through

More information

TAKE IT TO THE NEXEN LEVEL

TAKE IT TO THE NEXEN LEVEL TAKE IT TO THE NEXEN LEVEL INDUSTRIES SERVED Aerospace Automation Equipment Automotive Bottling CNC Machining Commercial Laundry Equipment Converting Conveying Food Processing Machine Tool Material Handling

More information

VERTEX UNIVERSAL TESTING MACHINE

VERTEX UNIVERSAL TESTING MACHINE OVERVIEW : Loading Accuracy as high as + 1% Straining at variable speeds to suit a wide range of materials. Continuous roll autographic recorder supplied as standard to enable study of the behavior of

More information

GEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS

GEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS GEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS GEAR.. Power transmission is the movement of energy from

More information

Marine Engineering Exam Resource Review of Couplings

Marine Engineering Exam Resource Review of Couplings 1. What are rigid couplings used for? Used to join drive shafts together. True alignment and rigidity are required. Example Drive shafts and production lines, bridge cranes, solid shaft that needs to be

More information

Lecture (7) on. Gear Measurement. By Dr. Emad M. Saad. Industrial Engineering Dept. Faculty of Engineering. Fayoum University.

Lecture (7) on. Gear Measurement. By Dr. Emad M. Saad. Industrial Engineering Dept. Faculty of Engineering. Fayoum University. 1 Lecture (7) on Gear Measurement Fayoum University By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Industrial Engineering Dept. 2015-2016

More information

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING

TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING TABLE OF CONTENTS PART 7 - MACHINERY AND MACHINERY GUARDING Page DEFINITIONS...7-1 SAFEGUARDS...7-1 GUARDING...7-2 PULLEYS, BELTS AND BELT-SHIFTERS...7-3 CONTROLS...7-3 FLYWHEELS...7-3 GRINDING WHEELS...7-3

More information

Clock and watch escapements, power stamps and hammers, power punch, rotary conveyer, blower, pile driver and miscellaneous devices.

Clock and watch escapements, power stamps and hammers, power punch, rotary conveyer, blower, pile driver and miscellaneous devices. K»\ IX Nos. 1-21) 144 Clock and watch escapements, power stamps and hammers, power punch, rotary conveyer, blower, pile driver and miscellaneous devices. MECHANICAL MODELS 57 Section IX 129. Clock escapement.

More information

Unison Corporation. DedTru Centerless Grinding Product Line

Unison Corporation. DedTru Centerless Grinding Product Line Price List PL Unison Corporation DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model IGF Internal Grind Fixture Model C6 DedTru Grinding Fixture

More information

UNISON CORPORATION. DedTru Centerless Grinding Product Line

UNISON CORPORATION. DedTru Centerless Grinding Product Line Price List PL UNISON CORPORATION DedTru Centerless Grinding Product Line Model C DedTru Grinding Fixture Model PGF Plunge Grind Fixture Model C6 DedTru Grinding Fixture Model IGF Internal Grind Fixture

More information

CONTENTS WIRE TANGENT SERVO WIRE FEED STRAIGHTENER HEAVY DUTY TANGENT SERVO WIRE FEED MODULAR WIRE 6-7 STRAIGHTENER WIRE PNEUMATIC WIRE SHEAR

CONTENTS WIRE TANGENT SERVO WIRE FEED STRAIGHTENER HEAVY DUTY TANGENT SERVO WIRE FEED MODULAR WIRE 6-7 STRAIGHTENER WIRE PNEUMATIC WIRE SHEAR P/A INDUSTRIES P/A Industries offers technology driven solutions for all wire handing, straightening and feeding needs. Whether your need is retrofitting older equipment with new technology or integrating

More information

CHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK IV SEMESTER

CHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK IV SEMESTER CHENDU COLLEGE OF ENGINEERING & TECHNOLOGY DEPARTMENT OF MECHANICAL ENGINEERING QUESTION BANK IV SEMESTER Sub Code: ME 6401 KINEMATICS OF MACHINERY UNIT-I PART-A 1. Sketch and define Transmission angle

More information

A member of the ardagh group

A member of the ardagh group Heye Servo Technology for IS-Machines presented by : Dipl.-Ing. Hans-Joachim Böer AFGM Conference, Manila 2006 Heye Servo IS-Machine The following Servo Mechanism are installed : Blank Mould Closing Mechanism

More information

III B.Tech I Semester Supplementary Examinations, May/June

III B.Tech I Semester Supplementary Examinations, May/June Set No. 1 III B.Tech I Semester Supplementary Examinations, May/June - 2015 1 a) Derive the expression for Gyroscopic Couple? b) A disc with radius of gyration of 60mm and a mass of 4kg is mounted centrally

More information

ANSI B Index

ANSI B Index Index A Abrasive disc wheels... 16 17, 79, 99 mounting... 39 40, 94 Abrasive flap disc wheels... 23 Abrasive wheel... 1, 89 Portable air grinding machines... 26 Acceptance of shipment... 27 Actuating controls...

More information

Moments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced.

Moments. It doesn t fall because of the presence of a counter balance weight on the right-hand side. The boom is therefore balanced. Moments The crane in the image below looks unstable, as though it should topple over. There appears to be too much of the boom on the left-hand side of the tower. It doesn t fall because of the presence

More information

HAKO Overheadmodels - Section 7 Mechanical engineering, pneumatics, hyraulics

HAKO Overheadmodels - Section 7 Mechanical engineering, pneumatics, hyraulics Order no. 216 Caliper gauge - design of a caliper gauge - four different vernier scales can be read (1/10mm, 1/20mm extended and 1/50mm) - all values can be clearly read Order no. 218 Micrometer - full

More information

Hours / 100 Marks Seat No.

Hours / 100 Marks Seat No. 17412 16117 3 Hours / 100 Seat No. Instructions (1) All Questions are Compulsory. (2) Answer each next main Question on a new page. (3) Illustrate your answers with neat sketches wherever necessary. (4)

More information

BEST OF 2014 January December

BEST OF 2014 January December Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front

More information

Some practical considerations

Some practical considerations ME 222: Kinematics of Machines and Mechanisms [L9] Practical Considerations Suril V. Shah IIT Jodhpur 1 Some practical considerations Pin Joints versus Sliders and Half Joints Cantilever or Straddle Mount?

More information

DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING

DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING DECOILING STRAIGHTENING FEEDING ACCUMULATING REWINDING TRAVERSING CONSULTANCY, DESIGN, PRODUCTION, AFTER-SALES SERVICE CONTENT 03 Consultancy, design, production, after-sales service 04 Strip decoiling,

More information

All levers are one of three types, usually called classes. The class of a lever depends on the relative position of the load, effort and fulcrum:

All levers are one of three types, usually called classes. The class of a lever depends on the relative position of the load, effort and fulcrum: Página 66 de 232 Mechanisms A mechanism is simply a device which takes an input motion and force, and outputs a different motion and force. The point of a mechanism is to make the job easier to do. The

More information

COOPERATIVE PATENT CLASSIFICATION

COOPERATIVE PATENT CLASSIFICATION CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINEERING IN GENERAL F16 ENGINEERING ELEMENTS AND UNITS; GENERAL MEASURES FOR PRODUCING

More information

PRECISION BELLOWS COUPLINGS

PRECISION BELLOWS COUPLINGS PRECISION BELLOWS COUPLINGS Bellows couplings are used where precise rotation, high speeds, and dynamic motion must be transmitted. They exhibit zero backlash and a high level of torsional stiffness, offering

More information

BRCM COLLEGE OF ENGINEERING & TECHNOLOGY BAHAL, BHIWANI Practical Experiment Instructions Sheet

BRCM COLLEGE OF ENGINEERING & TECHNOLOGY BAHAL, BHIWANI Practical Experiment Instructions Sheet BRCM COLLEGE OF KOM ME- 212 F KINEMATICS OF MACHINES LAB BRANCH-ME List of Experiments : 1. To study various types of Kinematic links, pairs, chains and Mechanisms. 2. To study inversions of 4 Bar Mechanisms,

More information

DEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance

More information

Standard with cone bushing. Backlash-free Safety Clutch

Standard with cone bushing. Backlash-free Safety Clutch EAS -Compact ratchetting clutch/synchronous clutch The Backlash-free Safety Clutch for Standard with cone bushing Packaging Machinery Machine Tools Paper Machinery Indexing Drives Servo Motors EAS -NC

More information

CRANKSHAFT GRINDING MACHINES

CRANKSHAFT GRINDING MACHINES CRANKSHAFT GRINDING MACHINES 40 years of experience in Crankshaft Grinding Machines. The most complete range from 1.5 meters to 14 meters crankshaft length AZ is the world leader in the production of crankshaft

More information

Linear Torque Limiting Clutch

Linear Torque Limiting Clutch LM Series Features & Options Linear Torque Limiting Clutch Innovation Description & Operation Sankyo's LM Series offers adjustable torque limiting in any linear axis. It mounts directly to linear slide

More information

COOPERATIVE PATENT CLASSIFICATION

COOPERATIVE PATENT CLASSIFICATION CPC F COOPERATIVE PATENT CLASSIFICATION MECHANICAL ENGINEERING; LIGHTING; HEATING; WEAPONS; BLASTING (NOTE omitted) ENGINES OR PUMPS F01 MACHINES OR ENGINES IN GENERAL (combustion engines F02; machines

More information

In-Line Positive Feed Tools

In-Line Positive Feed Tools In-Line Positive Feed Tools ADVANCED DRILLING EQUIPMENT SP-1300-1-EN-0806-.25M 1-1 Introduction In-Line Positive Feed Tools How Positive Feed Drills Operate Our in-line positive feed drills use two interconnected

More information

Spares Suitable for Heidelberg S Series Machines

Spares Suitable for Heidelberg S Series Machines 23360 Screw Driver 515 mm. Total Length 23362 Swing Gripper Side Spring 23363 Clip For Coil Spring 20104 Chain Delivery Gripper 20109 Chain Delivery Gripper Clamp Old Type 20110 Chain Delivery Gripper

More information

E L L I O T T 14M, 18M & 24M. Contents OPERATORS INSTRUCTION HANDBOOK FOR THE HIGH SPEED SHAPING MACHINES MODELS. Also COMPONENT PARTS LIST.

E L L I O T T 14M, 18M & 24M. Contents OPERATORS INSTRUCTION HANDBOOK FOR THE HIGH SPEED SHAPING MACHINES MODELS. Also COMPONENT PARTS LIST. OPERATORS INSTRUCTION HANDBOOK FOR THE E L L I O T T HIGH SPEED SHAPING MACHINES MODELS 14M, 18M & 24M Also COMPONENT PARTS LIST Contents Page Slinging 2 Examination 2 Cleaning 2 Installation 3 Foundation

More information

ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue

ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue ARMSTRONG-BLUM MANUFACTURING CO. saoo w. Bloomingdale Avenue Chicago Illinois 60639, USA FAST, ACCURATE, EASY OPERATION Powerful blade drive, infinitely variable speed and feed. Quickly change from automatic

More information

VALLIAMMAI ENGINEERING COLLEGE DEPARTMENT OF MECHANICAL ENGINEERING ME6401- KINEMATICS OF MACHINERY QUESTION BANK PART-A Unit 1-BASICS OF MECHANISMS 1. Define degrees of freedom. BT1 2. Describe spatial

More information

Same Day Service ORDERS RECEIVED BY 2 P.M. WILL BE SHIPPED THE SAME DAY. Top Quality Low Prices REPLACEMENT PARTS CATALOG PART #P-AA $ 50.

Same Day Service ORDERS RECEIVED BY 2 P.M. WILL BE SHIPPED THE SAME DAY. Top Quality Low Prices REPLACEMENT PARTS CATALOG PART #P-AA $ 50. REPLACEMENT PARTS FOR OFFSET PRINTING PRESSES 15th. REVISED EDITION DECEMBER, 2005 Same Day Service ORDERS RECEIVED BY 2 P.M. WILL BE SHIPPED THE SAME DAY Top Quality Low Prices $ 50.00 350 9840 9870 360

More information

PNEUMATIC & HYDRAULIC SYSTEMS

PNEUMATIC & HYDRAULIC SYSTEMS PNEUMATIC & HYDRAULIC SYSTEMS CHAPTER SIX PNEUMATIC SYSTEM DESIGN AND DEVELOPMENT Dr. Ibrahim Naimi Symbols And Standards In Pneumatics The development of pneumatic systems is assisted by a uniform approach

More information

Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment

Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Where superior duct work begins. The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all

More information

Rotary Indexing Table with Face Gear

Rotary Indexing Table with Face Gear FIBROTAKT Rotary Indexing Table with Face Gear Product No. 1.001.00.00.00.01000 1 7975 006 4 08/007 Contents FIBRO The latest technology with a tradition of service /3 FIBROTAKT at a glance 4 Technical

More information

Special 45-rpm Changers

Special 45-rpm Changers 12 Special 45-rpm Changers and Spindles Introduction. Record changers that play only 45-rpm records use much the same dropping, set-down, and trip mechanisms as other changers. They do have several unique

More information

9905/9910/9910D/ 9910XCS/9910XC2 Service Reference Manual

9905/9910/9910D/ 9910XCS/9910XC2 Service Reference Manual 9905/9910/9910D/ 9910XCS/9910XC2 Service Reference Manual 1996, A.B.Dick Company P/N 177187 (REV. 0) WARNING: This equipment must be connected to a properly grounded three (3) wire outlet. Failure to do

More information

UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION

UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION UNIT-5 MEASUREMENT OF SPEDD, ACCLERATION AND VIBRATION Introduction: Speed is a rate variable defined as the time-rate of motion. Common forms and units of speed measurement include: linear speed expressed

More information

Universal. CNC Turning machine TNA500 TNA600

Universal. CNC Turning machine TNA500 TNA600 Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time

More information

Fabrication of Mini Air Cooler Electrical Power Generation From Thermal Power Plant

Fabrication of Mini Air Cooler Electrical Power Generation From Thermal Power Plant MP-001 MP-002 MP-003 MP-004 MP-005 MP-006 MP-007 MP-008 MP-009 MP-010 MP-011 MP-012 MP-013 MP-014 MP-015 MP-016 MP-017 MP-018 MP-019 MP-020 MP-021 MP-022 MP-023 MP-024 MP-025 MP-026 MP-027 Chain Less Cycle

More information

SECTIONAL WARPING MACHINE SERVOMECH-100

SECTIONAL WARPING MACHINE SERVOMECH-100 SPECIFICATIONS SECTIONAL WARPING MACHINE SERVOMECH-100 1.0 TECHNICAL SPECIFICATIONS: WORKING WIDTH : 2200mm to 3600 mm DRUM TYPE : Metallic Drum, Dynamically Balanced DRUM CONE HEIGHT : Fixed - 11 0 or

More information

The Design of Rolling Bearing Mountings PDF 1/8: Contents. Rolling Bearings

The Design of Rolling Bearing Mountings PDF 1/8: Contents. Rolling Bearings The Design of Rolling Bearing Mountings 1/8: Contents Rolling Bearings FAG OEM und Handel AG Publ. No. WL 00 200/5 EA The Design of Rolling Bearing Mountings Design Examples covering Machines, Vehicles

More information

MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.

MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2 B 488 Perforated Strip 3 1/2 B 482 Perforated Strip 4 1/2 9 1. PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"

More information

DEPARTMENT OF MECHANICAL ENGINEERING ME6401- KINEMATICS OF MACHINERY QUESTION BANK Part-A Unit 1-BASICS OF MECHANISMS 1. Define degrees of freedom. 2. What is meant by spatial mechanism? 3. Classify the

More information

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE

EGH-1880, ELITE 18X80 LARGE SPINDLE BORE CLUTCH LATHE When precision matters the most. The large spindle bore Elite lathes are the signature machines within the Elite lathe lineup. Engineered to meet world-class tolerances for spindle run out, bed alignment,

More information

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears

BSS Plate shears for sheet metals, paper and other material with collapsible substructure. Circular shears / Sheet metal shears Cutting Circular shears / Sheet metal shears New KS 1 - Manual circular shear to cut arcs of a circle in steel up to 1.0 mm KS 2 - Motor-driven circular shear to cut arcs of a circle in steel up to 2.0

More information

ROTARY INDEX TABLES RT Series

ROTARY INDEX TABLES RT Series ROTARY INDEX TABLES RT Series RT100 For mounted accessories up to Ø 800mm. For rapid assembly of small parts, inspection or feeding parts. 14 Fixed Index Drives The rotary index table transforms a constant

More information

SYSTEM TECHNOLOGY. K:\Daten\Web\Sonderlösungen\Web-Präsentation_E.doc

SYSTEM TECHNOLOGY. K:\Daten\Web\Sonderlösungen\Web-Präsentation_E.doc SYSTEM TECHNOLOGY Custom-made cylinders 9-stage cycle cylinder Cylinder system with 9 synchronized cylinders 80 mm dia. used as handling system for surface coating machines for CD- and DVD-production When

More information

Clutches for Automobiles and Light Trucks

Clutches for Automobiles and Light Trucks Clutches for Automobiles and Light Trucks What does the Clutch do? Connects the engine torque to transmission when ENGAGED Unhooks engine from transmission when DISENGAGED Where is the driver s foot when

More information

AMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508

AMERICAN TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508 AMERICAN 255-76TH STREET, S.W. e GRAND RAPIDS, MICHIGAN 49508 MODEL 60 REELS 1,000 Lbs. Capacity MODEL 60 MODEL 60-10 M- Motorized 60-10 NM- Drag Brake WIDTHS- 18" and 24" EXP. RANGE- 14" to 21" MAX. COl

More information

IC80 Series INTRODUCTION

IC80 Series INTRODUCTION SN-PL/2011/002 IC80 Series INTRODUCTION Sankyo America, Inc. is proud to offer the IC80 inline chassis precision link conveyor to manufacturers around the world. This innovative design features zero-backlash

More information

PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a

PARTS LIST FOR MECCANO No. 10 vs No. 7 & L 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes a PARTS LIST FOR MECCANO No. 10 vs No. 7 & "L" 10/37? P/N Description 7/25 10/49 10/49 10/55 10/86 L 1 Perforated Strip 25 holes 50 24 24 24 24 38 1a Perforated Strip 19 holes 12 6 6 6 6 16 1b Perforated

More information

MODEL A-I-SPECIFICATIONS

MODEL A-I-SPECIFICATIONS ARTER Model A Rotary Surface Grinders are built in a light and heavy series. General Construction- The general design of both models is the same but the major units of the A-3 machines are of greater proportions.

More information

FUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Presses - SP

FUNDAMENTAL MANUFACTURING PROCESSES. Sheet Metal Stamping Presses - SP FUNDAMENTAL MANUFACTURING PROCESSES Sheet Metal Stamping Presses - SP SCENE 1. SP15A, CGS: Mechanical Presses white text, centered on background FMP BKG, motion background SCENE 2. SP16A, SME4003, 02:12:03:00-02:12:15:00

More information

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping

GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without

More information

Agenda 10/4/2016. Servo Technology Experience 2016 TO (Nashville) SERVE, TO STRIVE, WITHOUT COMPROMISE.

Agenda 10/4/2016. Servo Technology Experience 2016 TO (Nashville) SERVE, TO STRIVE, WITHOUT COMPROMISE. Servo Technology Experience 2016 (Nashville) Agenda Why transfers? Transfer Technology History How Transfer s Integrate with Presses Transfer Tooling Options Auxiliary Tooling & Die Options New Technologies

More information

AGlobal SupplierofAutomotiveDieComponents

AGlobal SupplierofAutomotiveDieComponents AGlobal SupplierofAutomotiveDieComponents Jolico/J-B Tool, Inc. CHRYSLER INDEX DESCRIPTION PAGE DESCRIPTION PAGE ARM ARM, ROTARY FLIPPER CI-3 COMPENSATOR COMPENSATOR, STOCK GUIDE CB-1 BASE BASES, TRUNNION

More information

Features and Specifications for Impact Wrenches

Features and Specifications for Impact Wrenches Pneumatic Air Tools Version 2017 Revised 06/2017 Email your order to: sales@polyconn.com or fax to (763) 398-2590. www.polyconn.com. Questions call: (763)559-0388 3062 Ranchview Lane North. Plymouth, MN

More information

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE

HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE, CIRCULAR SAW and BANDSAW MACHINE HACKSAW MACHINE Coolant System Hydraulic Feeding Quick Clamping Vise Saw Size 14 Cutting Cap. 7 Saw Size 18 Cutting Cap. 10 Blade 10 KW1500415 CIRCULAR

More information

This is trial version

This is trial version Z-Standards Contents (Alphabetical order, terms partly according to DIN 16750) A All dimensions shown in this catalogue are specified in mm, given tolerances refer to an ambient temperature of 20 C Prod.-No.

More information

Attention is drawn to the following places, which may be of interest for search:

Attention is drawn to the following places, which may be of interest for search: F01B MACHINES OR ENGINES, IN GENERAL OR OF POSITIVE-DISPLACEMENT TYPE, e.g. STEAM ENGINES (of rotary-piston or oscillating-piston type F01C; of non-positive-displacement type F01D; internal-combustion

More information

Code No: R Set No. 1

Code No: R Set No. 1 Code No: R05222106 Set No. 1 II B.Tech II Semester Supplimentary Examinations, Aug/Sep 2007 MECHANISMS AND MECHANICAL DESIGN (Aeronautical Engineering) Time: 3 hours Max Marks: 80 Answer any FIVE Questions

More information