HARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) OTC #OTC M8 OTC #OTC M6
|
|
|
- Joleen Blair
- 5 years ago
- Views:
Transcription
1 HARDWARE SET SCREWS M8 X 6 (USED COMMONLY IN SCORES) SET SCREWS M6 X 5 (USED COMMONLY IN SCORES) Brass tip alloyed steel black finish BEARING 10MM SHIELD OTC #OTC M8 OTC #OTC M6 OTC #OTC
2 H&H THIN SCORES MALE FEMALE OTC #OTC OTC #OTC Highly polished heat treated carbon steel offering the best in quality and usability. These scores fit all H&H 35 cm folding machines. Installed with soft brass tip alloyed steel set screw. Our two-channel female offers thin or thick scoring capabilities depending on the channel you choose. We widened the other side of the female score to offer the thicker scoring option, identifying market demands of one up runs which reduces the need to slit during this operation. Solid piece construction of our male score offers strength and durability while reducing set up time.
3 KOLBUS KM470 CAM, LEFT CAM, RIGHT HOLDER SHEET SEPARATOR GUIDE BLOCK LEVER BOLT FOR OVERLOAD HOLDER FOR PUSHER OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OEM # OEM # OEM # OEM # S OEM # OEM # OEM # OEM #
4 TECHNOGRAPH BRACKETS LONG BRACKET - BRASS SHORT BRACKET - BRASS SHIFT LEVER - BRASS OTC #OTC OTC #OTC OTC #OTC Constructed from solid billet brass.
5 TECHNOGRAPH LONG BRACKET ASSEMBLY COMPLETED ASSEMBLY SHAFT COLLAR 12MM COMPRESSION SPRING HARDENED PRECISION SHAFT 12MM STEEL BRACKET FOLLOWER L BRACKET STAINLESS STEEL KR-19 CAM FOLLOWER NEEDLE BEARING LONG BRACKET BRASS OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC OTC #OTC
6 VIJUK BUSHING BLOCK WITH 10MM BUSHING LH WITH 10MM BUSHING RH WITH 12MM BUSHING LH WITH 12MM BUSHING RH PLATE OTC #OTC OEM #V1093 OTC #OTC OEM #V1092 OTC #OTC OEM #V0800 OTC #OTC OEM #V0801 OTC #OTC OEM #V219 Our bushing blocks are offered in a left and right style and are constructed from alloyed steel. Bushings are available to fit a 10mm and 12mm shaft constructed from bearing bronze to prevent wear and increase durability.
7 VIJUK MV2005 FOLDING ROLLER FRONT FOLDING ROLLER REAR FRONT PRESSURE ROLLER REAR PRESSURE ROLLER OTC #OTC OTC #OTC OTC #OTC OTC #OTC OEM #MV2825 OEM #MV2408 OEM #MV2821 OEM #MV2822
8 VIJUK MV-97 UPPER FOLD ROLLER OTC #OTC OEM #MV3058
9 VIJUK MV-97 PLASTIC GEARS SMALL GEAR WITH BEARINGS & SNAP RINGS SMALL GEAR ONLY LARGE GEAR WITH STEEL HUB FOR FOLD BOX LARGE GEAR ONLY OTC #OTC OEM #V1021A OTC #OTC OEM #V1009-A Small plastic gear assembled with 10mm sealed bearings. This product comes as a complete assembly for quick change maintenance or plastic gear only requiring bearings and snap rings. In both applications, this product is an exact duplicate of the OEM at almost half the cost. OTC #OTC OEM #MV3068 OTC #OTC OEM #MV3068 Large plastic gear assembled with 12mm steel hub and keyway. This product comes as a complete assembly for quick change maintenance or plastic gear only requiring steel hub with keyway. In both applications, this product is an exact duplicate of the OEM at almost half the cost.
10 VIJUK PLUNGERS SIDE GUIDE PLUNGER GLUE PLUNGER OTC #OTC M5 OTC #OTC M5 OEM #MV3103D OEM #MV3103-C
11 VIJUK CHECK NUT & SETTING SCREW OTC #OTC M5 OEM #V0181A Check nut made with 7075 aluminum aircraft solid billet material, hard coat anodize finish. This material and finish offers the strength and durability of the OEM steel product at a fraction of the cost. Setting screw constructed from steel alloy and finished to prevent corrosion Call for individual pricing B H i c k o r y L a n e B a y v i l l e, N J w w w. o l y m p i c - t o o l. c o m P F
12 VIJUK STEEL GEARS DOUBLE GEAR ASSEMBLY OTC #OTC DOUBLE GEAR ASSEMBLY OTC #OTC DOUBLE GEAR STUD OTC #OTC OEM #MV3037 OEM #MV3035 OEM #MV3035-E
13 VIJUK THICK SCORE MALE FEMALE OTC #OTC OTC #OTC OEM #V187A OEM #V188A Highly polished heat treated carbon steel offering the best in quality and usability. These scores fit all Vijuk and G&K 35 cm folding machines. Installed with soft brass tip alloyed steel set screw. Product has been in use in several pharmaceutical packaging facilities and has been working flawlessly. Operators and maintenance personnel have been convinced that our product is superior to all others.
14 VIJUK THIN SCORE MALE FEMALE OTC #OTC OEM #V187 OTC #OTC OEM #V188 Highly polished heat treated carbon steel offering the best in quality and usability. These scores fit all Vijuk and G&K 35 cm folding machines. Installed with soft brass tip alloyed steel set screw. Product has been in use in several pharmaceutical packaging facilities and has been working flawlessly. Operators and maintenance personnel have been convinced that our product is superior to all others.
15 VIJUK TRANSMISSION SHAFTS UPPER OTC #OTC OEM #MV2806 LOWER OTC #OTC OEM #MV2834 PULLEY OTC #OTC OEM #MV2823
Solutions for Specialized Folding
PARTS CATALOG VOL. 4 Solutions for Specialized Folding TABLE OF CONTENTS Folding Roller Rear...1 Modified Upper Fold Roller...1 Female Knife Shaft...1 Roller Levers...1 Bore Scores...2 Bushing Blocks...3
Solutions for Specialized Folding
PARTS CATALOG VOL. 3 Solutions for Specialized Folding TABLE OF CONTENTS 53CM Rollers...1 43CM Rollers...1 Roller Levers...1 Bore Scores...2 Bushing Blocks...3 Check Nut...3 Compression Springs...3 Seat
C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT
To Order Call: 1-800-658-4568 11 C/M Replacement Poly Row Dividers For JD 90 Series 30 inch Cornheads 30 Inch Center Dividers Only NEW AND IMPROVED POLY SNOUT EXACT REPLACEMENT FOR 30 INCH CENTER DIVIDER
MAR RATIO 1ST GEARS for BIG TWIN 1984 & EARLIER 4 SPEED ULTIMA 4 SPEED TRANSMISION CASE SPECIAL : DRIVETRAIN PARTS!
SPECIAL : DRIVETRAIN PARTS! 4, 5 & 6 SpeedS MAR 8-15 Midwest CLOSE RATIO 1ST GEARS for BIG TWIN 1984 & EARLIER ULTIMA TRANSMISION CASE 1936-64 Midwest gear sets exceed OEM specifications & the products
FA 54 / FA 74 / FA 82 FOLDERS
FA 54 / FA 74 / FA 82 FOLDERS The most reliable, accurate, and versatile commercial folders FA 54 / FA 74 / FA 82 FOLDERS E T he same excellent engineering at GUK that brought you the best miniature folders
FOR MORE INFORMATION OR TO PLACE AN ORDER CALL TOLL FREE PAGE 30
COLD ROLLED STEEL ROUND, SQUARE, FLAT, HEX AND S.S. ROUND, THREADED ROD 1018 COLD ROLLED STEEL ROUND 3 1/8 --- -- 101218 $.60 103618 $1.60 3/1 --- -- 1012316.65 1036316 1.75 1/4 --- -- 101214.95 103614
Tel/Fax: Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM.
Replacement parts for : MULTI 1210, 1250OS, 1250W, 1250N, 1250DOM., 1215CD, VARIABLE SPEED PULLEY 1250 O.S. - 1/2 Shaft P-1629 1250 N.S. - 5/8 Shaft P-1649 V-BELTS 35 Motor to printing head P-4904 33 Pump
Series LS16K Hydraulic Cable Winches
Series LS16K Hydraulic Cable Winches Lift-Safe hydraulic winches are specifically designed for lifting applications and optimum load control. Engineered for enhanced safety with redundant braking systems,
S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
Pressure Relief Valves. 1541/1543 Series. Consolidated Safety Valve
Pressure Relief Valves 1541/1543 Series Consolidated Safety Valve Table of Contents Conversion Table 1541/1543.2 Features & Benefits 1541/1543.3 Applications 1541/1543.3 Scope of Design 1541/1543.4 Materials
FEEDMAX SYSTEM IJ SERIES. Parts Manual
FEEDMAX SYSTEM IJ SERIES Parts Manual TABLE OF CONTENTS FEEDMAX SYSTEM FEEDMAX CONVEYOR (FIG. 1)....3 FRAME ASSEMBLY (FIG. 2).. 5 ADJUSTABLE PULLEY ASSEMBLY (FIG. 3)..7 DRIVE ASSEMBLY (FIG. 4)....9 IDLER
1. Arm Bed Components Ref. No Part No. Description Amount 1 H Model Plate 1 2 H Model Plate Rivet 2 3 H Bed Screw Stud
1. Arm Bed Components 1 H110-01-001 Model Plate 1 2 H110-01-002 Model Plate Rivet 2 3 H110-01-003 Bed Screw Stud 4 4 H110-01-004 Side Plate 1 5 H110-01-005 Gasket 1 6 H110-01-006 Screw 12/64-28 L=9 8 7
Tugger T-Bolts Coupling (Extension) Nuts Eye Bolts Metric Coupling (Ext.) Nuts Latch Swing Bolts Heavy Hex Nuts...
INDEX Threaded Rod... 4 T-Slot Nuts... 14 Driver Studs - Stainless Steel... 4 Stainless Steel T-Nuts... 14 Driver Studs... 4-5 Stainless Steel Flange Nuts... 15 Driver Studs Various Thread Lengths... 6
In Order by Pin Diameter & Height
Bi-fold Closet Door Pin Assemblies In Order by Pin Diameter & Height Closet Door Hardware 1/4" DIAMETER Assembly # 900-9421 Assembly # 1-250 Pin w/cap 1-243 Assembly # 1-161 Pin w/cap 1-160 Assembly #
Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER
Model 912 / 922 AUGER HEADER and Model 722 HAY CONDITIONER Model 933 Grass Seed Special AUGER HEADER PARTS CATALOG Form 46619 Issue 01/06 Sugg. Retail: $15.00 Inside Front Cover (blank) Models 912, 922
ASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
FEEDMAX W/ SHUTTLE IJ SERIES. Parts Manual
FEEDMAX W/ SHUTTLE IJ SERIES Parts Manual TABLE OF CONTENTS FEEDMAX SYSTEM FEEDMAX CONVEYOR (FIG. 1)....3 FRAME ASSEMBLY (FIG. 2).. 5 ADJUSTABLE PULLEY ASSEMBLY (FIG. 3)..7 DRIVE ASSEMBLY (FIG. 4)....9
1 KW-880 Parts Manual
Headstock... 2 Hitch Beam... 4 Central Gearbox... 6 Central Gearbox... 8 Intermediate Beam... 10 Intermediate Beam... 12 Intermediate Beam Outside... 14 Intermediate Beam Outside... 16 Outer Support Tube...
Chain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
S & S. replacement parts. precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA Fax:
S & S replacement parts precision parts. precision manufacturing. 161 Lee Industrial Drive Blairsville, GA 30512 800.969.0881 Fax: 706.781.6649 www.corrugatedparts.com sales@corrugatedparts.com First Stop
Closet Door Hardware. Bi-Fold Closet Door Pin Assemblies. Leigh/Monarch. Peachtree. National. National. Fenestra. Leigh/Monarch.
Bi-Fold Closet Door Pin Assemblies In Order by Pin Diameter & Height 1/4" DIAMETER Assembly # 900-9421 Assembly # 1-250 Assembly # 1-161 Assembly # 1-159 Assembly # 1-131 Assembly # 1-145 Assembly # 1-145A
TABLE OF CONTENTS. S4000 LT Omron
TABLE OF CONTENTS Needle Bar... 3-2 Clamping... 3-4 Thread Trimmer & Material Trimming... 3-6 Shifter Mechanism... 3-8 Feed Mechanism... 3-10 Looper Mechanism... 3-14 Base... 3-16 Bite Mechanism... 3-18
BRAND RHINCOEROS SHOE REPAIR MACHINE MS From the library of: Superior Sewing Machine & Supply LLC. *13.! : 'fij7}5 OOjf. c El~ ~~, m~ & ~fl:ffl)
RHINCOEROS BRAND SHOE REPAIR MACHINE MS-2971 i'jljf!!~j!j!ll!hl~~;;t*l.$ ~m?tom c ~~) ~1 1~ c El~ ~~, m~ & ~fl:ffl) ~Dft-T, ~ It ' ffiift ' ~-T ' ~~~&ft-t $g~gffwiii~ MI J~ ~'*W\~~m~* *I ~}L :ffl~~w\i
Product Catalogue. Version 8.0. Section. FUWA Axle Components
Product Catalogue Section E Version 8.0 FUWA Section E Fuwa - Cam and Brake Assembly E:48 PRODUCT CATALOGUE 8.0 Fuwa - Cam and Brake Assembly Part List - 6 axle tube (square) - 5 axle tube (round) TL-11-427-800045
Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under 7500 rpm
PUSHRODS Small Block Chevrolet Swedged End Pushrods.080 Wall 1010 Steel Heat treated and black oxide finish For use in hydraulic lifter applications with less than 400 lbs. open spring pressure and under
phone
AS-25-59 Ball AS-035508 Pinion Housing Bearing AS-035515 Bearing AS-036552 Ink Fountain Adjusting Screw AS-051120 Bearing call for details AS-053111 Cam Follower AS-087047 Bearing Hanger Bracket Assembly
RECOMMENDED SPARE PARTS PART NUMBER PART DESCRIPTION NO. REQ D Pin-STST Metric Blade Frame 2
RECOMMENDED SPARE PARTS PART NUMBER PART DESCRIPTION NO. REQ D 5835-7705 Clip-Hairpin 2 0777-0034 Pin-Eccentric 2 0797-0059-2 Pin-STST Metric Blade Frame 2 0711-0002 Link-Top 2 5601-1966* Belt-V (4L36-1/2)
Combine Pickup Heads
Combine Pickup Heads Torsion Combine Pickup Heads Section 6 30 ft. Torsion Combine Pickup Head... 2-5 24 ft. Torsion Combine Pickup Head... 6-9 Return to this page by clicking the upper right corner of
READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or
The following changes were made to this machine since the owner's manual was printed: Obtained CSA certification meeting CSA C22.2 #105-1953 and UL 987-7th standards. Changed transformer, contactors, overload
TRANSMISSIONS MANUAL
DMR-5023 Stick shift pilot bearing. Knurled for sure fit, self aligning for perfect fit and smooth running and shift. Fits ant GM manual stick transmission crank. Allows GM transmission in Ford cars. DMR-5022
2018 QUALITY BOWLING PRODUCTS
2018 QUALITY BOWLING PRODUCTS QUALITY PARTS for BRUNSWICK EQUIPMENT SPOTLIGHT PRODUCTS Urethane Chutes With coefficients of friction lower than any other urethane deck chute on the market, you may just
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
Sure-Feed Engineering Inc. PLACER STANDARD HOPPER. Operation & Parts Manual PLACER-STD_1
Engineering Inc. PLACER STANDARD HOPPER Operation & Parts Manual PLACER-STD_1 Engineering Inc SECTION 2 PLACER OWNERS MANUAL Table of Contents 1. Installation guide 2. Set-up/operation instructions 3.
S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
Dear Colleague, Please give us a call and let us know how we can assist you. We look forward to talking to you soon. Thank you.
Dear Colleague, Thank you for visiting our website and downloading a product catalog from the R.. Hoffman Company. We hope this information will be useful to you in solving the application you are working
MF7. Hydraulic Lift Pumps and Related Components
Page Hydraulic Pumps 2- Hydraulic Pump Repair Kits - Auxiliary Pumps, Radial Pumps, Filters - Covers - Cylinders Hydraulic Quick Couplers MF Pumps and Related MF 2 & Hydraulic Pumps S.0 Hydraulic Pump
BSM ROTARY GEAR PUMPS
-SERIES FLG. MTD. PUMP PUMP FOOT The BSM -Series pumps are designed to provide quiet and efficient service at standard motor speeds, moderately high pressures. Typical applications are supplying hydraulic
TABLE OF CONTENTS. S-4000 BH Omron. Needle Bar Clamping Thread Trimmer Shifter Mechanism Feed Mechanism...
TABLE OF CONTENTS S-4000 BH Omron Needle Bar... 2 Clamping... 4 Thread Trimmer... 6 Shifter Mechanism... 8 Feed Mechanism... 10 Looper Mechanism... 14 Base... 16 Bite Mechanism... 18 Knife Thread Draw-OFF
RENEWAL PARTS ORDER GUIDE. FCV-500 AND FCV-750 VACUUM CIRCUIT BREAKERS WITH STORED ENERGY OPERATOR NO V
,.. \... I'
NOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
HYDRAULICS PUMP DESIGN CYLINDER DESIGN HYDRAULICS
HYDRAUL Sykes-Pickavant Loadstar Plus heavy duty pullers are renowned for their durability, immense pulling power and versatile range of kit options. Sykes-Pickavant hydraulic equipment builds upon the
4A200T-E080 VALVE, ROCKER ARM GROUP
A00T-E00 VALVE, ROCKER ARM GROUP - - REF. NO 0 PART. NO E60- DESCRIPTION VALVE, INLET DK55 DK55-AU DK55-EU Q TY DK55-EN DK55C DK55C-AU DK55C-EU DK55C-EN I.C REMARK 0 E6500- VALVE, EXHAUST 0 5-- SPRING,
OPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
TransLift TL 2550K Parts Manual
TransLift TL 2550K Parts Manual Tink, I nc. 2361 D urham Dayton H w y D urham, C A 95938 Toll Free 888-367-8465 Fax 530-895-0751 w w w.tink inc.co ṁ Table of Contents Full Assembly View... 2 Tank View...
MINA-GEAR GEARMOTORS P-1. Mina-Gear Features... P-2 Application & Selection... P-3 Right-Angle Worm Gearmotors Series Parallel Shaft Gearmotors
MINA-GEAR GEARMOTORS Mina-Gear..................................................... -2 Application & Selection................................................... -3 Right-Angle Worm Gearmotors 2100 Series
MAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (incl 17.5% VAT)
Part No. AJS & MATCHLESS SINGLE ENGINE - NEW PARTS Price (incl 17.5% VAT) Price (excl VAT) 000217 Nut for cylinder base stud, double hexagon 2.90 2.47 000300 Cylinder base stud 3.20 2.72 022516 Stud, cylinder,
WYS52FX730VCA FOR SERIAL NUMBERS U00681 AND ABOVE
PARTS MANUAL WYS52FX730V WYS52FX730VCA FOR SERIAL NUMBERS 201312U00681 AND ABOVE 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
For For more information, see
Applications: For For more information, see www.cranecams.com Big Block Chevrolet Cylinder heads; OEM or Aftermarket having standard valve and stud locations. These include but are not limited to: World
MAIN FRAME 84-G PART # DESCRIPTION QTY /4-20 X 1 SHCS /4-20 X 1 1/4 SHCS /16-18 X 3/4
MAIN FRAME 84-G30-3699-02 PART # DESCRIPTION QTY 99-280-7006-05 1/4-20 X 1 SHCS 2 99-280-7006-06 1/4-20 X 1 1/4 SHCS 2 99-280-7007-04 5/16-18 X 3/4 FHS. 1 99-280-7012-01 NUT, NYLOC 10-24, CAD PLATE 1 99-280-7015-01
Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232. Mounting Plates 231 Shifter Components 230
Bushings & Hardware 233 Clutch Release Components 230 Kicker Covers & Parts 232 Lock Tabs 234 Mounting Plates 231 Shifter Components 230 TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES &
1. General Description
1. General Description A: SPECIFICATIONS 1. Type Transmission gear ratio Front reduction gear Rear reduction gear 2. TRANSMISSION GEAR OIL Recommended oil Final Transfer 5-forward speeds with synchromesh
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Genset. Parts Catalog HDKAG
Genset Parts Catalog HDKAG To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference, insert your nameplate information
PULL HANDLES THERMOPLASTIC CAST IRON ALUMINUM STAINLESS STEEL BIG HAND STYLE P U L L H A N D L E S
473 THERMOPLASTIC CAST IRON P U L L H A N D L E S ALUMINUM PULL HANDLES Manual Clamps 9 TriMax Vises 81 Pneumatic Workholding 121 Supports, Stops & Set Up Accessories 137 Precision Tooling Plates, Blocks
Universal Platform. 282 Model Section 5. Platform Parts Breakdown Retractable Finger Auger Parts Breakdown
Universal Platform 282 Model Section 5 Platform Parts Breakdown... 2-3 Retractable Finger Auger Parts Breakdown... 4-5 Combine Pickup Head Parts Breakdown... 6- Return to this page by clicking the upper
HMD v Power Feed with Coolant HMD v Type I plug, Power Feed with Coolant
0925202 HMD925 20v Power Feed with Coolant 0925302 HMD925 20v Type I plug, Power Feed with Coolant b a 5 HOOKS TO COOLANT INDUCER 8 7 9 29 3 0b 0a 0 36 23 8 7 3 2b 2a 2 a 7 Part / Serial Number Label 33
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
370 Visit us on the Internet at YE Air Cleaner Adapter
TOOLS & FOOT PRIMARY & ENGINE & SHEET GAS & OIL WHEELS FRAMES & HANDLEBARS SPRINGERS TRIKE GENERAL EXHAUST TRANSMISSION CONTROLS DRIVETRAIN ELECTRICAL METAL TANKS & BRAKES ACCESSORIES LIGHTING & RISERS
9010 A/E. Rim Clamp Tire Changer. Parts Identification. For servicing single piece automotive and most light truck tire/wheel assemblies
9010 A/E Rim Clamp Tire Changer For servicing single piece automotive and most light truck tire/wheel assemblies s Identification READ these instructions before placing unit in service KEEP these and other
05060 Coolant Bottle Assembly
Coolant Bottle Assembly 05060 Coolant Bottle Assembly 0506 Round Bottle 05059 Coolant Botttle Bracket 05065 Ball Valve 05067 Brass Barb Fitting (bottem of the bottle) 030 Vinyl Tube 07080 Brass Fitting
2008 K&M NEWSPAPER SERVICES, INC SLS.1000 HOPPER SLS1000 HOPPER
SLS1000 HOPPER - 1-800-828-0242 NEEDLE ASSEMBLY - 2-800-828-0242 NEEDLE ASSEMBLY ITEM PART NUMBER DESCRIPTION QUANTITY 1 KMS 5020 ROD END 1 2 KMS 2093 NEEDLE BAR ARM 1 3 KMS 2045 NEEDLE BAR LINK 1 4 KMS
Combine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
HORSE III 8HP ROTO TILLER (S/N ) Page 1 of 25 Bolo Tine Assemblies
HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 1 of 25 Bolo Tine Assemblies HORSE III 8HP ROTO TILLER (S/N 640000-855638) Page 2 of 25 Bolo Tine Assemblies 1 GW-2415 2 S/F TINE HOLDER- welded steel.
1988 Chevrolet Pickup V SUSPENSION - FRONT (4WD)' 'Front Suspension - "V" Series 1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series
1988 SUSPENSION - FRONT (4WD) Front Suspension - "V" Series DESCRIPTION NOTE: Vehicle serial numbers used in this article has been abbreviated for common reference to Chevrolet and GMC models. Chevrolet
refrigeration SHAKE #15-77CMT ICE CREAM MACHINE ELECTRO FREEZE 21 SHAKE DISPENSE HEAD ASSEMBLY SHAKE BEATER SEAL ASSEMBLY 9
SHAKE DISPENSE HEAD refrigeration SHAKE #-CMT 0 SHAKE BEATER SEAL EF Head Dispense, Shake side EF Bushing, Beater Bearing EF O-Ring Head EF O-Ring Plunger, Lower, pkg of EF0 O-Ring Plunger, Upper, pkg
PEMKO Catalog Sliding & Folding Hardware
PEMKO Catalog Sliding & Folding Hardware About PEMKO: PEMKO manufactures an extensive range of quality products for many applications. This catalog is focused on Sliding and Folding Hardware. There are
Combine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
WYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE
PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...
SGR-13 Stump Grinder
Form No. 3413-939 Rev A SGR-13 Stump Grinder Model No. 22619 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3413-939* A Ordering Replacement Parts To order replacement
Parts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
KEY PART # DESCRIPTION KEY PART # DESCRIPTION
SINGLE HEAD BEATER SHAFT EF0 Head Dispense w/actuator EF Nozzle, Serrated EF Knob, Hand EF00 Handle Assembly Dispense w/knob EF Knob Ball, /"-, THD Black EF Pin Handle EF Plug for O-Ring, pkg of EF Plug,
FIGURE 1. OPERATOR CONTROLS
FIGURE 1. OPERATOR CONTROLS ITEM PART UNITS PER NO. NO. DESCRIPTION MACHINE 1 31440023. LOGIC BOX ASSEMBLY... 1 2A 20292874.. BOX, LH Control (Box Only)... 1 2B* 20292887.. BOX, RH Control... 1 3* 27260500.
PARTS LIST. BRC Racing BRC 250 FE SERIAL NO: BRC Racing
BRC Racing PARTS LIST BRC 20 FE SERIAL NO: BRC Racing A Division of BRC Engineering Ltd. # - 2nd Ave NE Calgary, Alberta Canada T2E S1 Tel: 0-21-00 Fax: 0-21-0 Web: www.brceng.com RELEASE DATE: 01-200
DELCO 20/22/25/27MT BREAKDOWN
DELCO 20/22/25/27MT BREAKDOWN J&N UNIT # JanNco # OE PART # LESTER # TYPE VOLT ROTATION TEETH 410-12027 25MT 12 CW 9 410-12028 410-12028R 1109264 6177 25MT 12 CW 10 410-12030R 20MT 12 CW 10 410-12031 410-12031R
ASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 KEY # PART # DESCRIPTION QTY. KEY # PART # DESCRIPTION QTY. 1. 84-100-56B FRONT FRAME CLOSURE 1 24. 84-125-108 RETAINER STRAP ASSEMBLY
TABLE OF CONTENTS S-4000 ISBH+I SM
TABLE OF CONTENTS Needle Bar... Clamping... Clamping Angle... Thread Trimmer... Shifter Mechanism... Feed Mechanism... Looper Mechanism... Base... Bite Mechanism... Thread Draw-off Mechanism... Main Cam...
ASSEMBLIES. Table of Contents C BERG
ASSEMBLIES Table of Contents GEARBOXES - WORM WHEEL AND HELICAL GEARS TECHNICAL DATA - SPEED REDUCERS..................... C 2 WORM & WORM WHEEL GEARS SHAFT SIZE - 1/8, 3/16 AND 1/4......................
JET FORMING. Brakes Shears Rolls Rotary and Hand Notcher Machines Presses
Brakes....................................... 111 Shears....................................... 114 Rolls........................................ 115 Rotary and Hand Notcher Machines.............. 117
Models 642E, 642F, 662E, 644E, 664F, & 6A4E
Models E, F, E, E, F, & AE 0 0 0 0 Models E, F, E, E, F, & AE. -0 Lock Jam Nut /-. -0 Flat Idler. -B Auger Idler Arm. 0-0A Hex Cap Screw /- x.0. -0 Bushing. -0 Bell Washer. -00 Hex Nut /-. -0 Hex Lock
9. DRIVE AND DRIVEN PULLEYS/ KICK STARTER AGILITY ~6.0kg-m g-m g-m 9-0
9 5.0~6.0kg-m 3.5-4.5g-m 9 3.5-4.0g-m 9-0 SERVICE INFORMATION...9-1 DRIVE BELT...9-5 TROUBLESHOOTING...9-1 DRIVE PULLEY...9-6 LEFT CRANKCASE COVER...9-2 CLUTCH/DRIVEN PULLEY...9-9...9-2 SERVICE INFORMATION
122 Fasola Road, Sequim Wa (360) Morgan +4 Engine Rebuild Brochure
122 Fasola Road, Sequim Wa 98382 (360) 582-9020 Morgan +4 Engine Rebuild Brochure This brochure is intended to show the extensiveness of the work performed on the TR engines that I rebuild. I treat each
Detroit Speed, Inc. Rear Coilover Tower Brace Kit Camaro P/N:
Detroit Speed, Inc. Rear Coilover Tower Brace Kit 2016+ Camaro P/N: 042433 The Detroit Speed, Inc. 2016+ Camaro Rear Coilover Tower Brace Kit is a bolt-in design that increases overall vehicle stiffness.
Replacement Part Diagrams SG12 Series Surface Grinder
Replacement Part Diagrams SG Series Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn: xxx, PAGe: Frame Assembly SG/E Surface Grinder SG GrinderS FOrM GOMxxxxxxxx, VerSiOn.0, AUTHOriZATiOn:
Tray Box Former Option Parts & Illustrations Index FIGURE / DESCRIPTION. Option Parts & Illustrations Illustrated Parts
14.0 INTRODUCTION Tray Box Former This section lists and illustrates the replaceable assemblies and parts of the Tray Box Former as manufactured by Each parts list contains the component parts for that
2008, K&M NEWSPAPER SERVICES, INC. INSERTER 2299 INSERTER
99 INSERTER - - - 800-88-0 COMPLETE FIXED POCKET WALL ITEM PART # DESCRIPTION QUANTITY KMS 0CW COMPLETE POCKET WALL COMES ASSEMBLED WITH YOUR CHOICE OF GRIPPERS & PADDLES - - - 800-88-0 FIXED POCKET WALL
Clippard offers more types of miniature pneumatic cylinders for the MINIMATIC CYLINDER
MINIMATIC CYLINDER Clippard offers more types of miniature pneumatic cylinders for the designer s convenience, including: spring return, spring extend, air retract, double-acting and double rod models.
Gearbox and Deck Assembly Index
Index Numeric call-outs (e.g. 3 ) = page number 35 Cam Follower Shaft Support Bracket For A2, Jetback and Straight A Pinsetters # 420502 Support Bracket 1 to 1 Plate Detector Plate Prevents Crisis Breakdowns:
54ZB. 54 BEAST Zero Turn Riding Mower. 22hp EH65V Robin Subaru
54ZB 54 BEAST Zero Turn Riding Mower 22hp EH65V Robin Subaru 54ZB Deck Parts Diagram Key Item # Gxi Part Number Description 1 SP11-000062 Belt guard, 54ZB, set of 2 with rubber T-handle receivers 2 SP12-000229
High-Speed Matador 17/20
High-Speed Matador 17/20 PARTS LIST Advance MODELS 56172395, 56172400, 56172410 56172425 This parts list is for machines after serial number 279789 All models covered in this manual are OBSOLETE 10/89
6280 PART NUMBERS & DIAGRAMS
EXTERNAL PARTS 112 73330 111-2D 73313 73315 6280HD-146 136 230 73242 73205 73213 162 206 207 73245 179 73020 168 178 206 73228 73221 241 73221 6280-110 Wheel Spacer (Not Shown) 6280-111-2D Wheel with Hub
phone
AS-035508 Pinion Housing AS-040502 AS-040504 Locknut AS-085015 AS-1023953 Top Plate Seal AS-1080-AY Ink Fountain Divider AS-229246 Retaining Ring AS-236250 Retaining Ring AS-250-833 Water Union Tube 90
BATHROOM HARDWARE. Bathroom Hardware
Bathroom Hardware s... 10-1 to 10-4 Shower Door Guides... 10-4 Shower Door Brackets... 10-5 Shower Door Sweeps... 10-5 Shower Door Latches... 10-5 Shower Door Handles... 10-5 to 10-6 Miscellaneous Shower
Disassembly and Assembly NIPPONDENSO F4 & F8 SERIES STARTING MOTORS. Starting Motor
Page 1 of 11 Disassembly and Assembly NIPPONDENSO F4 & F8 SERIES STARTING MOTORS Starting Motor D3 TRACTOR 79U04709-UP (MACHINE) POWERED BY 3204 ENGINE(SEBP11 Page 2 of 11 F8 Starting Motor (1) Battery
IGNITION ACCESSORIES COIL COVERS COIL BRACKET CHROME TOP HAT WIRE RETAINER CHROME PLATED VACUUM ADVANCE COVER SPARK PLUG BOOT INSULATORS 6012G
IGNITION ACCESSORIES COIL COVERS Chrome plated steel coil covers feature universal design to accept most stock coils. Includes chrome plated mounting bracket. Universal Coil Cover, horizontal mount...9777
Champion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
Double Master Plus Combine
Pickup Head Section 3 Pickup Head Straight Pull (2001 20)... 2-7 Pickup Head DMP SP2 (2006 2008)... 8-10 Pickup Head DMP SP2 (20 2014)... 11-13 Pickup Head DMP & DMP SP (2010 2014)... 14-16 Pickup Head
HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies
12090-8HP Electric PTO Horse Tiller Page 1 of 23 Bolo Tine Assemblies 12090-8HP Electric PTO Horse Tiller Page 2 of 23 Bolo Tine Assemblies 1 1901975001 2 S Tine Holder-welded steel, fits left or right
PARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE
PARTS MAN UAL SDA-1200 STEER ABLE DRIVE AXLE SDA-1400 STEER ABLE DRIVE AXLE SDA-1600 STEER ABLE DRIVE AXLE WITH EX TENDED SERV ICE BRAKES AND ABS PRO VI SIONS Fabco Automotive Corporation, Livermore, CA
phone
AS-25-59 Ball AS-035508 Pinion Housing AS-035512 AS-036552 Ink Fountain Adjusting Screw AS-053111 Cam Follower sliding block fountain AS-085015 AS-087459 Idler Gear AS-1001705 Set Screw AS-1023953 Top