Non-Adjustable Series Hydraulic Shock Absorbers TK, STH Micro-Bore Series. Non-Adjustable Series. Overview. Features and Benefits
|
|
|
- Christopher Claud Simon
- 5 years ago
- Views:
Transcription
1 TK Hydraulic Shock bsorbers TK, STH Micro-Bore Series Overview TK 10 Series TK 21 Series TK 6 Series ENIDINE non-adjustable micro-bore hydraulic shock absorbers can accommodate varying energy conditions. This family of tamperproof shock absorbers provides consistent performance, cycle after cycle. Non-adjustable models are designed to absorb maximum energy within a compact envelope size. The TK Series is a versatile, miniature design which provides effective, reliable deceleration and vibration control for light loads. s can accommodate a wide range of operating conditions. The Enidine STH Series offers the highest energy absorption capacity relative to its size. These custom-orificed shock absorbers are designed to meet exact application requirements. STH Series shock absorbers are available in fully threaded cylinder bodies, providing flexibility in mounting configurations. eatures and Benefits Extensive non-adjustable product line offers flexibility in both size and energy absorption capacity to fulfill a wide range of application requirements. Tamperproof design ensures repeatable performance. Special materials and finishes can be designed to meet specific customer requirements. Threaded cylinders provide mounting flexibility and increase surface area for improved heat dissipation. select variety of surface finishes maintains original quality appearance and provides the longest corrosion resistance protection. ISO quality standards result in reliable, long-life operation. Incorporating optional fluids and seal packages can expand the standard operating temperature range from (15 to 180 ) to ( 30 to 210 ). 35
2 Hydraulic Shock bsorbers TK, STH Micro-Bore Series Enidine Non-djustable Single-Orifice Shock bsorbers Piston Rod Bearing oam ccumulator ylinder heck Ball Piston Head Overview TK Orifice oil Spring Piston Stop Plug onstant orifice area damping (dashpot) provides the largest shock force at the beginning of the stroke when impact velocity is highest. These shock absorbers provide high-energy absorption in a small, economical design. The internal structure of a single orifice shock absorber is shown above. When a force is applied to the piston rod, the check ball is seated and the valve remains closed. Oil is forced through the orifice, creating internal pressure allowing smooth, controlled deceleration of the moving load. When the load is removed, the compressed coil spring moves to reposition the piston head, the check ball unseats, opening the valve that permits rapid return of the piston head rod to the original extended position. The closed cellular foam accumulator is compressed by the oil during the stroke, compensating for fluid displaced by the piston rod during compression. Without the fluid displacement volume provided by the foam accumulator, the closed system would be hydraulically locked. Single-orifice shock absorbers provide constant orifice area (dashpot) damping. 36
3 TK Hydraulic Shock bsorbers TK, STH Ordering Information/pplication Worksheet Shock bsorbers Example 1: Standard Products 10 TK 10 I - 2 B 10 TK 21 quantity catalog number thread designation from engineering data chart (If applicable) ccessories Example 1 damping constant from appropriate sizing graph pplication Worksheet piston rod type (without button) B (with button) M (levis mount) Example 2: ustom Orifice Products* quantity catalog number *Enidine will specify individual part number for each application. PPLITION DT Specify: Vertical, rotary or horizontal motion Weight Impact velocity Propelling force (if any) Other (temperature or other environmental conditions) ycles per hour 10 U 3 /4-16 Universal Mounting lange 5 U 8609 (P/N U ) (P/N ) quantity catalog/part number Example 2 quantity catalog/part number Urethane Striker ap 37 X NO.: DTE: TTN: OMPNY: The Enidine pplication Worksheet makes shock absorber sizing and selection easier. ax, phone, or mail worksheet data to Enidine headquarters or your nearest Enidine subsidiary/affiliate or distributor. (See catalog back cover for Enidine locations, or visit for a list of Enidine distributors.) Upon Enidine s receipt of this worksheet, you will receive a detailed analysis of your application and product recommendations. (or custom design projects, Enidine representatives will consult with you for specifi cation requirements.) GENERL INORMTION ONTT: DEPT/TITLE: OMPNY: DDRESS: TEL: EMIL: PRODUTS MNUTURED: X: PPLITION DESRIPTIONT Motion Direction (heck One): Up ngle Horizontal Vertical Incline Down Height Rotary Horizontal Rotary Vertical Up Down Weight (Min./Max.): (lbs.)(kg) ycle Rate: (cycles/hour) dditional Propelling orce (If Known): (lbs.)(n) ir yl: Bore (in.)(mm) Max. Pressure (psi)(bar) Rod Dia.(in.)(mm) Hydraulic yl: Bore (in.)(mm) Max. Pressure (psi)(bar) Rod Dia. (in.)(mm) Motor (hp)(kw) Torque (in-lbs.)(nm) mbient Temp.: ( ) Environmental onsiderations: SHOK BSORBER PPLITION Number Shock bsorbers to Stop Load Impact Velocity (min./max.): (in./sec.)(m/sec.) Shock bsorber Stroke Requirements: (in.)(mm) G Load Requirements : (G)(m/sec 2 ) RTE ONTROL PPLITION (ll Data Taken at Shock bsorber) (ll Data Taken at Shock bsorber) Number of Rate ontrols to ontrol the Load: ontrol Direction: Tension (T) ompression () Required Stroke: (in.)(mm) Est. Stroke Time: (sec.) Estimated Velocity at the Rate ontrol: (in./sec.)(m/sec)
4 Hydraulic Shock bsorbers TK Micro-Bore Series TK 6M, TK 8 Series Standard Q atalog No./ TK 6M TK 8M ØG H ( P ) Nominal oil Bore (S) (E T ) (E T ) Max. Spring orce Weight Size Stroke Max. Max. Shock Extended ompressed (mass) in. in. in.-lbs./cycle in.-lbs./hour orce lbs. lbs. lbs. oz. (mm) (mm) (Nm/c) (Nm/h) (N) (N) (N) (g) , (4,2) (4,0) (1,0) (3 600) (360) (1,0) (3,5) (4) , (4,2) (4,0) (1,0) (4 800) (360) (1,0) (3,5) (6) Technical Data TK atalog No./ TK 6M -1, -2, -3 TK 8M -1, -2, -3 G H Q Damping in. in. in. in. in. in. in. onstant (mm) (mm) (mm) (mm) (mm) (mm) (mm) M6 x 0,5 (29,0) (2,0) (25,0) (5,0) (4,0) (1,0) (29,0) M8 x 1,0 (2,0) (25,0) (6,4) (4,0) (1,0) Notes: 1. Dash numbers in page color are non-standard lead time items, contact Enidine. 2. positive stop is required to prevent the bottoming of the TK 6 and TK 8 shock absorbers. TK 6M/TK 8M TOTL ENERGY (Nm/c) IMPT VELOITY (in/sec) IMPT VELOITY (m/sec) TOTL ENERGY (in-lbs/c) 38
5 TK Hydraulic Shock bsorbers TK Q TK 10M Series Standard W ØG H WL *Note: 1 and E apply to button models and urethane striker cap accessory. 1 * ( P ) Nominal oil ( D ) (S) (E T ) (E T ) Max. Spring orce Max. Weight atalog No./ Stroke Max. Max. Shock Extended ompressed Propelling (mass) in. in.-lbs./cycle in.-lbs./hour orce lbs. lbs. lbs. orce lbs. oz. (mm) (Nm/c) (Nm/h) (N) (N) (N) (N) (g) TK 10M (B) , (6,4) (6,0) (13 000) (1 400) (1,5) (10,0) (17) ØE* Q W ØG H WL Technical Data TK 10M TOTL ENERGY (Nm/c) atalog No./ TK 10M (B) -1 to -9 Damping 1 D ØE G H Q W WL Stroke (S) onstant in. in. in. in. in. in. in. in. in. in. in. in. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) M10 x Note: Dash numbers in page color are non-standard lead time items, contact Enidine. (44,6) (54,4) M10 x 1,0 (3,1) (8,5) (38,0) (8,3) (5,0) (1,5) (9,0) (4,0) (6,4) -9 TK 21M Series Standard Q ØG IMPT VELOITY (in/sec) IMPT VELOITY (m/sec) -5 *Note: 1 and E apply to button models and urethane striker cap accessory. atalog No./ D G H Q Damping in. in. in. in. in. in. in. onstant (mm) (mm) (mm) (mm) (mm) (mm) (mm) TK 21-1, -2, /8-32 UNE TK 21M -1, -2, -3 (35,4) M10 x 1,0 (3,1) (28,7) (8,2) (4,4) (1,2) Note: positive stop is required to prevent the bottoming of the TK 21 shock absorber. H ( P ) Nominal oil ( D ) (S) (E T ) (E T ) Max. Spring orce Max. Weight atalog No./ Stroke Max. Max. Shock Extended ompressed Propelling (mass) in. in.-lbs./cycle in.-lbs./hour orce lbs. lbs. lbs. orce lbs. oz. (mm) (Nm/c) (Nm/h) (N) (N) (N) (N) (g) TK , TK 21M (6,4) (2,2) (4 100) (700) (2,9) (5,0) (89) (12) IMPT VELOITY (in/sec) 0 TK 21 TOTL ENERGY (Nm/c) TOTL ENERGY (in-lbs/c) IMPT VELOITY (m/sec) 39 TOTL ENERGY (in-lbs/c)
6 Hydraulic Shock bsorbers STH Small-Bore Series STH.25M STH 1.5M x 2 Series ustom Orificed Products W ØE Technical Data STH W 1 ( P ) Nominal oil Spring orce (S) (E atalog No./ T ) (E T ) Max. Stroke Max. Max. Shock Extended ompressed Weight in. in.-lbs./cycle in.-lbs./hour orce lbs. lbs. lbs. lbs. (mm) (Nm/c) (Nm/h) (N) (N) (N) (g) STH.25M , oz. (6,0) (11) (4 420) (2 730) (11) (18) (79) STH.5M ,000 1, oz (12,5) (65) (44 200) (8 000) (18) (31) (218) STH.75M , ,000 4, (19,0) (245) (88 400) (19 600) (35) (90) (500) STH 1.0M ,400 1,300,000 6, (25,0) (500) ( ) (29 800) (98) (235) (726) ,800 2,100,000 6, STH 1.0M x 2 (50,0) (1 000) ( ) (29 800) (66) (133) (862) ,200 2,200,000 14, STH 1.5M x 1 (25,0) (1 150) ( ) (65 000) (90) (227) (1 400) ,400 3,200,000 14, STH 1.5M x 2 (50,0) (2 300) ( ) (65 000) (56) (227) (1 800) Notes: 1. ustom orificed application data needed. 2. ll shock absorbers will function at 5% of their rated energy per cycle. If less than 5%, a smaller model should be specified. 3. Enidine recommends a positive stop to prevent bottoming of the shock absorber. 4. = Non-standard lead time items, contact Enidine. atalog No./ STH.25M STH.5M STH.75M STH 1.0M STH 1.0M x 2 STH 1.5M x 1 STH 1.5M x 2 1 D E W in. in. in. in. in. in. in. (mm) (mm) (mm) (mm) (mm) (mm) (mm) 2.81 M14 X (71,0) M14 x 1,0 (4,8) (12,7) (51,0) (13,0) 3.50 M22 X (89,0) M22 x 1,5 (5,6) (9,5) (68,5) (20,0) 5.13 M30 X (130,0) M30 x 2,0 (8,0) (14,3) (103,0) (27,0) 6.70 M36 X (170,0) M36 x 1,5 (9,5) (17,5) (136,5) (32,0) 9.38 M36 X (238,2) M36 x 1,5 (9,5) (17,5) (178,3) (32,0) 7.09 M45 X (180,0) M45 x 1,5 (16,0) (154,0) (42,0) M45 X (270,0) M45 x 1,5 (16,0) (219,0) (42,0) 40
7 TK Hydraulic Shock bsorbers TK, STH Micro-Bore Series TK 10 STH 1.5M x 2 Series Jam Nut (JN) atalog No./ J JB JH Part Number (Ref) in. in. in. J JB Lock Ring (LR) JH JN 3 /8-32 J TK 21 JN M10 x 1 J TK10M/TK21M JN M14 X 1 J STH.25M JN M22 X 1.5 J STH.5M JN M30 X 2 J STH.75M JN M36 X 1.5 J STH.1.0M JN M36 X 1.5 J STH 1.0 X 2M ccessories Weight (mass) oz. (g) (mm) (mm) (mm) (14,7) (12,7) (2,2) (2,8) (15,0) (13,0) (3,2) (2,8) (19,7) (17,0) (4,0) (3) (31,5) (27,0) (5,5) (12) (41,6) (36,0) (7,0) (26) (41,6) (36,0) (7,0) (26) (41,6) (36,0) (7,0) (26) ØB LH B LH atalog No./ Part Number (Ref) in. in. (mm) (mm) Weight (mass) oz. (g) LR M45 x STH 1.5 Series (57,2) (9,5) (75) Square lange (S) Ø LOK SLOT Part H S SB Bolt Size atalog No. Number (Ref) in. in. in. in. in. (mm) (mm) (mm) (mm) (mm) Weight (mass) oz. (g) S M45 X 1.5 M STH 1.5 Series / 16 5 (8,6) (12,7) (57,2) (41,3) (M8) (142) SB H S Side Load dapter (SL) W E ØS HEX JM NUT (NOT INLUDED) WL B STROKE Stroke B D E S W WL atalog No./ Part Number (Ref) in. in. in. in. in. in. in. in. in. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) SL 3 /8-32 x.25 SL TK /8-32 UNE (6,6) (12) (11) (5,0) (21,6) (13,0) (11,0) (4,0) SL 10 M SL TK 10M/TK 21M Notes: 1. Maximum sideload angle is Dash number in page color are non-standard lead time items, contact Enidine M10 X (6,9) (12) (11) M10 x 1 (5,0) (21,6) (13,0) (11,0) (4,0) 41
8 Hydraulic Shock bsorbers TK, STH Micro-Bore Series TK 10 STH 1.5M x 2 Series Rectangular lange (R) S SB Ø LOK SLOT ccessories STH RD RE H Bolt Wt. Part H RD RE S SB Size (mass) atalog No./ Number (Ref) in. in. in. in. in. in. in. in. oz. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (g) R M45 x 1.5 M STH 1.5 Series M45 x / 16 9 (8,6) (12,7) (60,5) (76,2) (57,2) (41,3) (M8) (142) Universal Retaining lange (U) K I Ø.22 B Ø.33 E D Ø.22 J G B D E G H J atalog No./ Part Number (Ref) in. in. in. in. in. in. in. in. in. (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) U M10 x 1 U TK 10M(B)/TK21M M10 x (38,0) (12,0) (6,0) (6,25) (25,5) (25) (12,5) (5) U 3 /8-32 U TK21 3 /8-32 UN
OEM XT. Adjustable Series Hydraulic Shock Absorbers OEM Series. Adjustable Series. Overview. Features and Benefits
OEM XT Hydraulic Shock bsorbers OEM Series Overview OEM Xtreme Mid-bore Series OEM Large Series OEM Small Bore Platinum Series Enidine djustable Hydraulic Series shock absorbers offer the most flexible
Non-Adjustable Series Hydraulic Shock Absorbers PM, PRO. Non-Adjustable Series. Overview. Enidine Non-Adjustable Multiple Orifice Shock Absorbers
, PRO Enidine Non-djustable Multiple Orifice Shock bsorbers Overview Piston Rod Bearing Foam ccumulator Coil Spring Cylinder Check Ring Piston Head Orifice Hole Location Oil Shock Tube Progressive damping
Adjustable Series Hydraulic Shock Absorbers OEM Series. Adjustable Series OEM XT. Overview. Features and Benefits
XT Hydraulic Shock Absorbers Series Overview Xtreme Mid-Bore Series Large Series Small Bore Platinum Series Enidine Adjustable Hydraulic Series shock absorbers offer the most flexible solutions to energy
Heavy Industry Products
Heavy Industry Products Applications: Amusement ride emergency stops Transportation safety stops Ladle transfer cars Coil upenders/downenders Rolling mill chock separators Furnace slab bumpers Hot strip
MAC / MAD series MAC SHOCK ABSORBERS. Order example. TUBE O.D. (mm) STROKE (mm) Select damping constant from graph
M / MD series SHOK SORRS Order example M 0806 1 TU O.D. MD: djustable M: Non-adjustable MD: Double cushion STROK Select damping constant from graph 1: Hight : Medium 3: Low S: -S series K: -K series lank:
Table of Contents Product Selection
Table of Contents Product Selection Company Overview...................................................................... 1 New Technologies and Enhancements................................................
Ultra-High Energy Absorption SC 25 to SC 650 Heavyweight Shock Absorbers. Featuring New SC 25, 75 & 190 Models Features...
Ultra-High Energy Absorption SC 5 to SC 650 Heavyweight Shock Absorbers Featuring New SC 5, 75 & 190 Models Features. Piston Tube Design for Long Cycle Life Stainless Steel Piston Rod Integral Mechanical
Heavy Duty Shock Absorbers
Heavy Duty Shock Absorbers Applications: Amusement ride emergency stops Transportation safety stops Ladle transfer cars Coil upenders/downenders Rolling mill chock separators Furnace slab bumpers Hot strip
Shock Absorbers and Rate Controls
Shock Absorbers and Rate Controls ITT Enidine provides quality energy absorption and vibration isolation products and services to a variety of heavy industries throughout the globe. These industries include;
Hydraulic Shock Absorbers & Buffers
www.izmac.co.kr Hydraulic Shock bsorbers & Buffers www.izmac.co.kr Best Engineered for Energy bsorption OVERVIEW s manufacturing process speeds up in every industry for better productivity and production
Shock Absorbers and Rate Controls. Shock Absorbers. and Rate Controls Product Catalog. Solutions in Energy Absorption and Vibration Isolation.
Shock bsorbers and Rate Controls Shock bsorbers and Rate Controls Product Catalog Solutions in Energy bsorption and Vibration Isolation. Enidine: Solutions in Energy bsorption and Vibration Isolation.
Ametric Automation & Deceleration Technology
n International World lass Engineering and Manufacturing ompany merican Metric orporation metric utomation & eceleration Technology atalog T 090522 ir Springs Gas Springs Speed ontrols Rotary ampers Shock
Heavy Duty Shock Absorbers
Heavy Duty Shock Absorbers Applications: Amusement ride emergency stops Transportation safety stops Ladle transfer cars Coil upenders/downenders Rolling mill chock separators Furnace slab bumpers Hot strip
Shock and Vibration Products
Shock and Vibration Products ITT Enidine provides quality energy absorption and vibration isolation products and services to a variety of heavy industries throughout the globe. These industries include;
Heavy-Duty Shock Absorbers
HL Heavy-Duty hock bsorbers HL FETURE pplications ranes, wing bridges Energy absorption Max. 335.000 Nm Deceleration characteristics ustomer spec. oating Housing zinc plated / painted Extended Life ycle
Heavy-Duty Shock Absorbers LDS
LS Heavy-uty Shock bsorbers LS ETURES pplications utomated warehouses, Stacker cranes, Cranes eceleration characteristics Customer spec. Coating Housing zinc plated / painted Extended Life Cycle Piston
Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated for long life. Special ra
5.3-5.4 Slide 5.5-5.12 Rodless 5.13-5.23 5.24-5.32 pplication hecklist 5.33 Two Models: Slide for self-guided motion DVNTGES Leak-free construction. Lightweight. Piston seals are internally lubricated
Shock Absorber & Gas Spring
07 & 1. Data [7] - 2 (Adjustable) /, [7] - 7 (Non-adjustable) / KSCA [7] - 12 Costant Speed Controller / [7] - 16 2. Data [7] - 18 / KBG-W10, W20 [7] - 21 / KBG-B20, B22 [7] - 24 Data Operating Principles
Heavy-Duty Shock Absorbers
Heavy-uty hock bsorbers ONLINE Calculation + 2 / 3 C ownload m H m g election LLING M m Example ormula & Calculation election H m = 0 H = 1,5 m = 0,4 m X = 1/h n = 1 W k = m g H = 14.715 Nm W = m g = 3.924
High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation
High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position
Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
Catalog No. C12119B. Nitrogen Gas Spring Lifters. Lifters for Single-Point, Multi-Point and Rail Lift Applications
atalog No. 12119B Nitrogen Gas pring Lifters L eries Lifters for ingle-point, Multi-Point and Rail Lift Applications Nitrogen Gas Lifters Introduction High Quality onstruction The global leader in nitrogen
Miniature Shock Absorbers MC 5 to MC 75
Miniature Shock Absorbers MC 5 to MC 75 Self-Compensating ACE Miniature Shock Absorbers are self-contained hydraulic units. The MC 5 to MC 75 model range has a very short overall length and low return
Miniature Shock Absorbers SC190 to SC925 Soft-Contact and Self-Compensating
Miniature Shock bsorbers SC190 to SC925 Soft-Contact and Self-Compensating 1 Operating Instruction SC190EUM-0 SC190EUM-1 SC190EUM-2 SC190EUM-3 SC190EUM-4 SC300EUM-0 SC300EUM-1 SC300EUM-2 SC300EUM-3 SC300EUM-4
Air-Oil Systems, Inc. Gas Springs AGS 15 - AGS 28
Gas Springs GS 15 - GS 28 Gas Springs ontrols gas springs are reliable units designed to handle the demanding needs of the industrial and commercial markets. They are maintenance free and self-contained.
Heavy-Duty Shock Absorbers
HLS Heavy-Duty Shock bsorbers HLS FETURES pplications ranes, Swing bridges Energy absorption Max. 335.000 m Deceleration characteristics ustomer spec. oating Housing zinc plated / painted Extended Life
Miniature Shock Absorbers MC150 to MC600 Self-Compensating
Miniature Shock bsorbers MC150 to MC600 Self-Compensating Operating Instruction 1 MC150EUM MC150EUMH MC150EUMH2 MC150EUMH3 MC225EUM MC225EUMH MC225EUMH2 MC225EUMH3 MC600EUM MC600EUMH MC600EUMH2 MC600EUMH3
COMPACT CYLINDER CYLINDER FORCE AND WEIGHT TABLE BASE WEIGHT EFFECTIVE AREA
CRS COMPACT CYLINDER STROKE TOLERANCE TEMPERATURE LIMITS VELOCITY LIFE EXPECTANCY SERIES CRS 1 psi min to 15 psi max at zero load [.7 bar min to 1 bar max] air.31 inch [.8 mm] -2 to +18 F [-28 to +82 C]
atalog /US asic eatures llen ey Sensor Locking lip ircuit ressure /12 5/32" Tube Instant onnections Driving ressure U xhaust ack ressure Thresho
Threshold Sensors... 2-3 locking Valves...4 3-Way, 2-osition Standard Duty... 5-8 Technical Data...9 Dimensions... 10-11 3-Way Miniature...12 Dimensions... Miniature and Standard Duty Limit Switches, ylinder
Table of Contents Industrial Shock Absorber
Table of Contents Industrial Shock Absorber Page Technical informations 4 Survey 16 Non-adjustable Shock Absorber Type SA 10 N, SA 10 SN, SA 10 S2N 20 Type SA 12N, SA 12 SN, SA 12 S2N 22 Type SA 14, SA
Dimensional Data Clevis / Brackets / Pins / rod Eyes
Dimensional Data levis / Brackets / Pins / rod yes W B W +.00 +.00 rod LVIS R KK THRD Load (tension) (lbs) Size Part # ode KK B R W R Part # ode 15-7-1001 101,80 7/16-0 / 11/ / 1/ 11/ 1/ 1/ 5/8 15-7-1001
Series NCM. Air Cylinder. Now available in 8 different bore sizes, 7/16" to 2".
ir Cylinder Series NCM Now available in 8 different bore sizes, 7/16" to 2". 5 ctuation options available: Double cting, Single Rod Double cting, Double Rod Non-rotating Rod Single cting, Spring Return
WDS INDUSTRIAL SHOCK ABSORBERS. & : * 1-a. Deceleration technologies: WDS
Benefits of using Industrial Shock Absorbers: Increased productivity through raised machine speeds, smoother operation and operator comfort. Smooth deceleration of moving parts leading to reduced wear,
Pneu-Turn Rotary Actuators
Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE
Industrial Cylinder Products Hydraulic and Pneumatic Cylinders. Catalog (01/11)
Industrial ylinder Products Hydraulic and Pneumatic ylinders atalog 00- (0/) Pneumatic ylinders Index Page Series, Heavy Duty, 0 P.S.I. ccessories - vailable Mountings and Specifications ushion Data -
NEN Series NFPA Aluminum Cylinders
NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered
LOCKED SERIES. Machine Failures. General Information. set up. maintenance. reconditioning. repair 30.4%
General Information LOCKED SERIES 2 Lowering machinery process costs is key in today s world. According to a recent study approximately a third of all machine stoppages result in unexpected damage and
Safety Shock Absorbers SCS300 and 650
s SCS300 and 650 60 The safety shock absorber series SCS300 to 650 are based on the innovative technology of the SC² series by ACE. y combining the piston and inner tube, an energy capacity up to 525 m
Actuator Products. Actuator Products Air Cylinders Section B. Actuator Products. Catalog PDN1000-3US Parker Pneumatic
ir Cylinders Section 1 Pictorial Index Catalog PDN00-3US Tie Rod Cylinders 3M - Economy NFP Cylinder 6 ore sizes 1-1/ through 5 inch 18 standard mounting styles Pressures up to 50 PSIG Temperatures - F
EDVC Velocity and Feed Controllers
EDVC Velocity and Feed Controllers Hydraulic Speed/Feed Controllers from Enertrols are selfcontained sealed units designed for precise control of speed in both directions of travel. The travel speed can
Ledex Rotary Solenoids Modifications and Custom Capabilities
Ledex Rotary Solenoids Modifications and Custom Capabilities Modifications and Customized Units For modifications including heavy duty return springs, drive pins, etc. please contact our application engineers
Rod end male thread. With rubber bumper 056(9/16") 075(3/4") 106(1 1/16") 150(1 1/2") 250(2 1/2") 300(3")
T.ID0-1 New ompact ylinder Series NQ8 ore size: 06(9/16 ),(/ ),106(1 1/16 ),(1 1/ ) 00( ),0( 1/ ),00( ),00( ) Now available in 00 ( ) and 00 ( ) bore sizes Standard type ctuation Style uilt-in magnet Rod
Medium Duty Hydraulic Cylinders Series 3L
Medium Duty Hydraulic ylinders Series L Medium Duty Service Industrial Tie od onstruction Nominal Pressure 000 PSI Depending on ore Size Standard ore Sizes " through " Piston od Diameters /" through -/"
Flow Control Valves. Overview. Accessories Catalog. Needle Valves. Flow Control Valves. Pressure Compensated Flow Control Valves.
Overview Needle Valves DV, DVE & DVP Series (see page ) Flow Control Valves DRV & DRVP Series (see page ) Pressure Compensated Flow Control Valves SRVR Series (see page ) Check Valves RV & RVP Series (see
Shock Absorber Accessories M5 to M25
Shock Absorber Accessories M to M 34 Selection Chart for Shock Absorber Accessories 1 Clamp Mount/ Universal Mount 2 Side Load Adaptor Shock Absorber Type KM AH MB RF UM BV Thread Size Mx0. MCEUM KM AH
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
ny mechanism that moves and that must be stopped is a potential application for controlled linear deceleration. There is no more effective way to achieve that control than through the use of Enertrols
GSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
S PEED R EGULATORS F OR M OVING D EVICES. Bulletin S-66
D E S C H N E R S PEED R EGULATORS F OR M OVING D EVICES L EAKPROOF H YDRAULIC C HECKS F OR S PEED R EGULATION O F M OVING D EVICES COMPACT & POWERFUL KINECHEKS are unequalled for controlling the speed
SPRING LOADED DEVICES
Spring Loaded Devices SPRING LOADED DE VICES Plungers: Plungers, Spring...38 39 Plungers, Spring, Metric... 40 41 Plungers, Shortie Spring... 42 Plungers, Shortie Spring Stainless Steel... 42 Plungers,
Victory A-Series Actuators PRODUCT CATALOG V55A V43A FG1 V32A FG2 V26A
Victory -Series ctuators PROUT TLOG V55 with parallel motor mounting V4 G1 with parallel motor mounting V2 G2 with inline motor mounting V26 with inline motor mounting Longer, aster, and More Reliable
Creating Linear Motion One Step at a Time Precision Linear Motion Accomplished Easily and Economically
Creating Linear Motion One Step at a Time Precision Linear Motion Accomplished Easily and Economically How Is a Linear Actuator Sized? Sizing a linear actuator is quite easy once you understand the basic
Safety Shock Absorbers SDP63 to SDP160 For Crane Installations
Safety Shock Absorbers SDP63 to SDP160 or rane Installations Operating Instruction 1 SDP63-50EU SDP63-75EU SDP63-100EU SDP63-150EU SDP63-200EU SDP63-250EU SDP63-300EU SDP63-400EU SDP63-500EU SDP63-600EU
Parker Series 2A Air Cylinder
Parker ir ylinder hen the job calls for reliable, heavy-duty performance, specify. 00,000 psi yield strength chrome-plated, case-hardened piston rod.,000 psi yield strength rod-end stud with rolled threads.
Vacuum Cups. Styles. Cup material Nitrile Silicon Urethane Material code NBR SI U Operating temperature ( C) -60 to ±5 55 ±5 55 ±5
atalog PN1000-2US Vacuum ups P ellows Vacuum ups These s are for curved, corrugated, lightly textured surfaces and flexible product. Under vacuum, the bellow will collapse on contact and lift the product
Position locking clamp cylinder. UCAC2 Series. Bore size: ø50, ø63. Double acting single rod type
Position locking clamp cylinder U2 Series : ø50, ø63 XXXXX Series Specifications JIS symbol Descriptions U2 mm ø50 ø63 ctuation Double acting Working fluid ompressed air Max. working pressure MPa 1.0 Min.
316 Stainless Steel Gas Springs & Dampers
316 Stainless Steel Gas Springs & ampers djustable Gas Springs Fixed Force Gas Springs djustable ampers xtension, ompression and ual-rate ampers Mounting Hardware Locking Springs Tension Springs arbon
Miniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
AL4 Series Air Cylinder
L Series ir ylinder atalog M097- February, 00 Up to 0 PSI Bore Sizes -/" through 8" NFP Interchangeable 7 Standard Mounting Styles Series ylinders Up to 0 PSI Permanently lubricated BT & BTM Series ylinders
Heavy Industrial Shock Absorbers
80 Automation ontrol Heavy Industrial Shock Absorbers ffective shock absorption for heavy loads The heavy industrial shock absorbers from A round off the top of the company s offers in damping technology.
POWER CLAMPING.
www.jergensinc.com POWER CLAMPING Air Circuit Controls- 2-Hand No Tie Down....59 Booster Clamping Kit....49 Boosters, High Pressure/Volume....47 Booster Installation Kits....48 Boosters, Pre-Fill....44
Hydraulic Jacks & Tools Valves
Hydraulic Jacks & Tools Valves VH-4/3-1 with VSM-21 VH-4/3-1 VH-3/3-1 VH-4/3-2 VHH-4/3 This port can easily be used to connect a pressure gauge and a pressure relief valve (e.g. VR-1). The oil port T shall
Miniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC5 to MC75 Self-Compensating ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC5 to MC75 have a very short overall length
SERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
Industrial shock absorbers
Industrial shock absorbers Safety shock absorbers Hydraulic speed controls General information Industrial shock absorbers, safety shock absorbers and hydraulic speed controls are used wherever masses have
Press Section Overview
Section Overview -200 Type and unctions Page -rame es 1-200 Roll rame es R 5-20 -lamp es 8 - rbor es 8 ench rame 8-200 ccessories Speed hart -200 ustom uilt es 1 5 1-0 Tension Meter ells TM L 2 pplication
Combination Clutch/Brake
ombination lutch/brake For metalforming equipment Fast, smooth cycling ool running with higher torque ompact disc design Simple Installation Multiple mounting options for compatability with other competitive
Automation Control Equipment
Automation Control Equipment Main Catalog Edition 7/2014 Industrial Shock Absorbers New Models Safety Shock Absorbers TUBUS Profile Dampers New Models Dampers/ Feed Controls New Models Industrial Gas Springs
POWER CLAMPING. Power Clamping. Air-Powered Hydraulic Pumps
Power Clamping Repair Kits... 213 Rotary Couplers...208 Swing Cylinder Arms... 150 Swing Cylinder Bottom Flange... 149 Swing Cylinder Top Flange... 148 Tubing, Steel... 212 Valves, Air Circuit... 202 203
Rotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES
NFPA Aluminum & Steel Cylinders
Section 11 NFP luminum & Steel ylinders Page T-11-18 ylinder with 01 (MS4) Side Tapped Page T-11-22 ylinder with 03 (MF1) Head ectangular Flange Page T-11-24 ylinder with 03 (M3) Head Square Flange Series
Options selector for T, VT, and ET V T S R 3 / 8 R C E N 1-1/8 5. 5/16" or 3/8"
Series T, T & VT Tiny Tim TUTORS /" and -/8" bore Single and double rod end styles Viton seals optional for higher temperatures Technical data Medium: ompressed air, filtered, lubricated or non-lubricated
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS)
Tanker 400 XP Series NITROGEN GAS SPRINGS IDEAL NITROGEN GAS SPRINGS FOR HIGH PERFORMANCE (TNK 400) AND HIGH SPEED (TNK 400HS) Tanker 400 XP Series Nitrogen Gas Springs IDEAL NITROGEN GAS SPRINGS FOR HIGH
Index 2 General Information page Shock Absorber Function General Information
ACE Controls self-compensating shock absorbers are fixed, multi-orifice units that decelerate moving weights smoothly regardless of changing conditions, and require no adjustment. These versatile performers
Heavy-Duty Shock Absorbers LDS 25. Deceleration Technology. ONLINE Calculation and 2D / 3D CAD Download. F m.
Heavy-Duty Shock bsorbers Deceleration Technology ONLINE Calculation and 2D / 3D CD Download F m V S Operating Principle Steel Cap Piston rod Filling Valve for Nitrogen Operating Principle LDS models are
TUBUS-Series Type TA
TUBUS-Series Type TA Profile Damper Axial Damping The profile damper type TA from the innovative ACE TUBUS series is a maintenancefree, self-contained damping element made from a special Co-Polyester Elastomer.
TUBUS-Series Type TA
TUBUS-Series Type TA Profi le Damper Axial Damping 76 The profile damper type TA from the innovative ACE TUBUS series is a maintenance-free, self-contained damping element made from a special Co-Polyester
Maximum force range from 15 kn to 220 kn
SCHMIDT HydroPneumaticPress Maximum force range from 1 kn to 220 kn The SCHMIDT HydroPneumaticPress range consists of a modular system suitable for transforming, joining and assembling optimally within
P1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
Industrial Shock Absorbers (Linear Decelerators)
Industrial Shock Absorbers () Catalog AU08-1022-1/NA February, 2007 Compact Designs High Effective Weight Capability Industry Interchangeable Metric and UNF Threads Complete Line of Accessories Quality
Precision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
Heavy Duty Ball Screw Linear Actuators
Heavy Duty Ball Screw Linear Actuators Thrust From 2,000 to 25,000 lbf Heavy Wall Steel Construction Longest Life Simultaneous High Thrust with High Speed Piston with Rugged Anti Rotation Feature Sealed
Crossed Roller Bearing Positioners
rossed Roller earing Positioners Parker Daedal precision crossed roller stages provide controlled, precise point-to-point positioning along a linear axis. Stages are comprised of two basic components:
L1 (Standard Motor Length) L2 (Brake Motor Length)
HepcoMotion Geared Motor Option The optional geared motor will be the preferred choice for many applications as it provides an excellent combination of power, accuracy, flexibility and value. HepcoMotion
Single, Two & Three-piece Ball Valves. ASME Class 150, 300 & mm mm (¼"- 8")
Single, Two & Three-piece Ball Valves SM Class 1, 300 & 600 8 mm - 200 mm (¼"- 8") Larsen & Toubro (L&T) is a technology, engineering, construction and manufacturing company. Seven decades of strong, customer-focused
SINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
Innovation in. Mechanical Motion & Vibration Controls
Innovation in Mechanical Motion & Vibration Controls ACE Controls Inc. located in Farmington Hills, Michigan, is a leading innovator in deceleration, vibration and motion control technology. For over a
M7X / M7V Series. Swash Plate Type Axial Piston Motor. Precision Machinery Company
Precision Machinery Company Swash Plate Type xial Piston Motor M7X / M7V Series QULITY HYDRULICS LTD WHINBNK PRK WHINBNK ROD YCLIFFE INDUSTRIL PRK NEWTON YCLIFFE CO. DURHM DL5 6Y TEL. 01325 317755 FX.
SERIES M SERIES. High Rigidity Vertical Machining Center YIH CHUAN MACHINERY INDUSTRY CO., LTD. Vertical Machining Center
M SERIES Vertical Machining enter EXELLENT TRUSTWORTHY ON AND ON YIH HUAN MAHINERY INDUSTRY O., LTD 407 8, 9 th Rd., Taichung Industrial Park, Taichung, Taiwan TEL : +88-4-239-331 FAX : +88-4-239-00 Web
Miniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC5 to MC75 1 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC5 to MC75 have a very short overall length and a low return
FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
PTR Series Pneumatic Rack & Pinion Rotary Actuator
zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8
Piston Accumulators Series Catalog HY /US Page
Page Series 5000 Series 5000 Piston ccumulators Heavy uty Service with 5000 PSI Operating Pressure 2" thru 9" ores with Over 30 Standard apacities Patented V-O-ring Piston Seals Serviceable Threaded End
atalog /US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single li
Vacuum ups Section 3 Parker annifin orporation ivision atalog 0802-2/US Index Vacuum ups Product Selection Technical Lifting orces, up iameters, Material Specifications 6-9 P lat Precision molded single
Crane Control Class 9055
Catalog 17 CONTENTS Description.....................................................Page pplication Data................................................... General Information and Pricing.......................................
Housings and Miscellaneous Parts
Housings and Miscellaneous Parts Standard and Special Valve Housings, Orifice Disks, Orifice Sizing harts, Pilot Pistons, dapters, djustment Kits and Seal Kits ETON Vickers Screw-in artridge Valves V-VLOV-M001-E1
T3T Series. From the Hyson family of higher force gas springs. Dynamic Solutions for a Global Market. Same force and diameter as T3 Series
T3T Series rom the Hyson family of higher force gas springs Same force and diameter as T3 Series S-4 (7/16-20) port for use with standard full size hoses Uses T2 flange mounts ive sizes from 1000 to 9500
Miniature Shock Absorbers MC5 to MC75
Miniature Shock Absorbers MC to MC7 ACE miniature shock absorbers are maintenance-free, self-contained hydraulic components. The model range MC to MC7 have a very short overall length and a low return
Jarret Series. BC1N, BC5, LR Series. Jarret Series. Overview Tel.: Fax:
JT Jarret Series BC1N, BC5, LR Series Overview Jarret Series LR Series BC5 Series BC1GN Series BC1ZN Series Spring The design of Jarret Industrial Shock Absorber utilizes the unique compression and shear
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body vailable with flow direction below and above
Deceleration Technology. Shock Absorbers WM-E 1,5. Old Series: Do not use for new designs. ONLINE Calculation + 2D / 3D CAD Download
Shock Absorbers WM-E 1,5 Old Series: Do not use for new designs Deceleration Technology ONLINE alculation + 2D / 3D AD Download m V S enefits Extended life cycle: - Housing black finish - Piston rod hardened