HCMCONNECTOR HCM. Board-to-wire/Wire-to-wire. Features. Specifications
|
|
- Baldwin Cooper
- 5 years ago
- Views:
Transcription
1 Board-to-wire/Wire-to-wire HCM.64 non-waterproof low profile type connector for automobile corresponding to the miniaturization of the automotive electrical equipment. Comply with the performance specification for automotive electrical connector systems, and corresponds to various purposes and mounting design. Features Low profile, Miniaturization in the direction of mating Using the short length female terminal, low profile in the direction of mating is realized Variations We have an abundant variation of PC board lock mechanism, lock type, wire-to-wire type and so on, according to your needs. Reliability and achievement Ensuring the reliabilities of an indispensable characteristic and mechanism etc. to the connector for automobile, this product has several adoption results proven in automotive electrical equipment miniaturized rapidly. Specifications Current rating: A AC, DC (.mm 2, Single circuit) Voltage rating: 14V AC, DC Temperature range: -4 C to +1 C (including temperature rise in applying electrical current) Contact resistance: Initial value/2mω max. After environmental testing/2mω max. Insulation resistance: 2MΩ min. Withstanding voltage: 1,V AC/minute Applicable wire: SE/ AVSS/ CAVS.3mm 2 to.mm 2 Contact JST if Lead-Free product is required. Contact JST for details. 1
2 Board-to-wire/Wire-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX 11 Female terminal 2.(.98) Female connector Inner lock type 11.(.433) 12.46(.491) 32.78(1.291) 11.6(.47) 3 =7.62(.3) HCMPB-4-S 11 =27.94(1.1) HCMPB-12-S Type Inner lock SHCM-A3T-P2 SHCM-A4T-P2 11.(.433) 1.(.91) 32.78(1.291) 11 =27.94(1.1) Applicable wire range Conductor (mm 2 ).3 to..2 4 =1.16(.4) Insulation O.D. mm(in.) 1.4 to 2.1 (. to.83) 1.2 to 1.7 (.47 to.67) Copper alloy, tin-plated (reflow treatment) HCMPB-A-S HCMPB-A12-S HCMPB-4-S HCMPB-A-S HCMPB-12-S HCMPB-A12-S : PBT, natural (white) : PBT, blue Q ty/reel,, 6 2 2
3 Board-to-wire HCM Female connector Outer lock type W/CPA type 1.7(.423) 1.(.91) 8.(.31) 12.46(.491) 8.9(.32) 4 =1.16(.4) HCMPB--S 12.(.494) 3 =7.62(.3) [2.8(.819)] 1.8(.622) Double-row type Double-row type HCMDPB-8-S Type Outer lock W/CPA Double-row Double-row 17.4(.691) =12.7(.) 1.(.91) (.364) HCMPB-C6-S 12.(.494) 4 =1.16(.4) HCMDPB-9-S HCMPB--S HCMPB-C6-S HCMDPB-8-S HCMDPB-9-S : PBT, natural (white) : PBT, blue CPA housing (Only for 6 circuits): Glass-filled PBT, red
4 Board-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX 13 Header Top entry type Inner lock type 2.(.98)dia (.7) 1.16(.4) Outer lock type circuits 6 circuits Screw hole type (.7) 1.16(.4) 2.32(.8) (.) 1.24(.6) 26.32(1.36) 2.32(.8) (.3) 12.7(.) 6.8(.268) 8.(.33) 12.(.472) 12.(.472) 1.8(.42) BB-HCMSS-R 433 : Glass-filled PBT, natural (white) 6 BB-AHCMSK B6B-HCMSK : Glass-filled PBT, natural (white) 4 B4B-HCMSS-RA 3 : Glass-filled PBT, natural (white)
5 HCM Header Side entry type Hook pin type 4 circuits 3 circuits 1.24(.6) 19.(.7) (.3) 13.97(.) 1.24(.6) 19.(.7) (.) 12.8(.4) 1.8(.42) 12.8(.4) 1.8(.42) 4 3 S4B1-HCMSS S4B1A-HCMSS : Glass-filled PBT, natural (white) Reinforcement: Brass, nickel-undercoated, tin-plated (reflow treatment) 14
6 Wire-to-wire HIT AIT HCM MIO CPT BMD CIT HIC SQS SQM SQH SQS2 SQW SQF SHUNT RING FEL FMT FOX CN EA1 WPZ JUNCTION BOX INDEX Male terminal Male connector [23.8(.939)] 7.2(.283) 8.9(.32) 12.(.492) 17.8(.71) 3.8(1.213) 14.6(.77) 4 =1.16(.4) Female connector 8.6(.341) 4 =1.16(.4) 1.(.91) SHCMW-A3T-4 Applicable wire range Conductor (mm 2 ).3 to. Insulation O.D. mm(in.) 1.4 to 2.1 (. to.83) Brass, tin-plated (reflow treatment) HCMWSB--K 2 PBT, black HCMWPB--K PBT, black Q ty/reel, Q ty/bag Q ty/bag 1
7 HCM PC board layout ( )dia ( )dia. ( )dia. 2.32±.1(.8±.4) Assembly layout BB-HCMSS-R HCMPB--S 16.(.6) BB-HCMSS-R ( )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 1.16±.(.4±.2) 4.4±.(.17±.2) 2.4±.(.1±.2) 7.62±.(.3±.2) HCMPB-4-S 17.(.689) B4B-HCMSS-R ( )dia ( )dia. ( )dia. HCMPB-A-S 17.(.689) BB-AHCMSK HCMPB-4-S BB-AHCMSK 13.97±.1(.±.4) ( )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 1.16±.(.4±.2) 7.62±.(.3±.2) 2.4±.(.1±.2) 9.4±.(.37±.2) S4B1-HCMSS ( )dia ( )dia. ( )dia ±.1(.±.4) B4B-HCMSS-R4 S4B1-HCMSS S4B1A-HCMSS Note: 1. Tolerances are non-cumulative: ±.mm (±.2") for all centers. 2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details. 17.(.689) B6B-HCMSK Top entry type Side entry type Wire-to-wire type Crimping machine, Applicator Strip terminal SHCM-A3T-P2 SHCM-A4T-P2 Crimping machine AP-K2N Dies MK/SHCM-A3-2 MK/SHCM-A4-2 Crimp applicator MKS-L Crimp applicator with dies APLMK SHCM-A3-2 APLMK SHCM-A (1.343) HCMWPB--K Note: When crimping operation is conducted by using other than above applicator and die set, JST cannot guarantee the performance of connector ( )dia. 2.±.(.98±.2) 2.4±.(.1±.2) 12.7±.(.±.2) 2.4±.(.1±.2) 9.4±.(.37±.2) HCMWSB--K 16
BH CONNECTOR. 1Certified LR Disconnectable Crimp style connectors. Features. Specifications. Standards. 4.0/8.0/12.0mm
Crimp 4.0/8.0/12.0mm (.157"/.315"/.472") pitch Disconnectable Crimp style connectors Emboss Tape Features Low profile Allows liquid crystal displays to be thinner, with only 3.2mm (.126"). SMT configuration
More informationMD CONNECTOR. 1Certified LR Miniature circular connectors. Standards
Miniature circular connectors Standards 0 Recognized E09 Certified LR0 Shielding effect Shielding effect(db) 0 0 0 Braided wires soldered to the metal shell 0 0 0 0 0 90 MD connector(with ground clip)
More informationUB CONNECTOR. 1Certified LR USB (Universal Serial Bus) Conforming Connector. Features. Specifications. Standards
USB (Universal Serial Bus) Conforming Connector Features Conforms to USB (Universal Serial Bus) standards This connector conforms to the USB standards, that stipulate the serial interface between PC's
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for 1.2mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST s R
More information2.5mm pitch/disconnectable Crimp style connectors. 1Certified LR R PC board layout (viewed from component side) and Assembly layout
Emboss Tape 2.5mm pitch/disconnectable Crimp style connectors Radial Tape Locking device Solder crack preventive material Low insertion force Insertion guide mechanism Applicable to automatic board mounting
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC mm pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables Features Twin U-slot ID section The twin U-slot is the most important IDC element in JST's R connectors.
More informationRA CONNECTOR IDC. 1Certified LR Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm (.050") pitch ribbon cables
IDC.54mm (.00") pitch R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm (.0") pitch ribbon cables Features Twin U-slot The twin U-slot is the most important IDC element in JST's
More informationRA CONNECTOR IDC. Features. Standards. Disconnectable Insulation displacement connectors for 1.27mm pitch ribbon cables. 2.
IDC.54mm R CONNECTOR IDC Disconnectable Insulation displacement connectors for.7mm pitch ribbon cables pitch Features Twin U-slot ID section The twin U-slot is the most important IDC element in eam JST
More informationEH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19") high
More informationEH CONNECTOR. 1Certified LR R Disconnectable Crimp style connectors. Features. Specifications. Standards. 2.5mm
Crimp 2.mm (.09") pitch EH CONNECTOR Disconnectable Crimp style connectors Radial Tape Features Compact and slim This connector is designed to be compact and unusually thin. It measures only.1mm (.19")
More informationCF CARD CONNECTOR MA Type
Emboss Tape CF CARD CONNECTOR MA Type 1.27mm pitch/50-circuit CF card connector Socket / Dual-row straddle type, SMT type Card frame / for type I cards Adapter / for type I, II cards Header / for type
More informationVL CONNECTOR. 1 Certified LR R Disconnectable Crimp style Wire-to-wire connectors. Features. Specifications. Standards. 6.
Crimp.mm (.") pitch Disconnectable Crimp style Wire-to-wire connectors Features Housing lances for contact retention Since the contact retention lances are part of the housing rather than protruding from
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping
More informationDSUBMINIATURE CONNECTOR J SERIES
D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping presses
More informationRWZ CONNECTOR. 1Certified LR Features. Specifications. Standards. Disconnectable Crimp style Wire-to-wire connectors
isconnectable rimp style Wire-to-wire connectors Features urability With the bellows type contacts, 2, cycles of mating/unmating is guaranteed. In addition, low insertion and withdrawal force is realized.
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 High voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More informationAMPLIMITE.050 Series Cable Assemblies, Series III
Cable Assemblies, Series III To meet Standard Applications the following 106 ohm, black jacketed cable assemblies are available. For AMPLIMITE Series cable assemblies that meet other impedance requirements
More informationFAZ CONNECTOR. 1Certified LR Connectors for FFC. Features. Specifications. Standards. 1.0mm
mm pitch FZ ONNETOR onnectors for FF Emboss Tape Features Zero insertion force mechanism (ZIF) ZIF mechanism improves wear resistance and extends the mating life of the connector. y moving the slider into
More informationWaterproof Series Waterproof
Waterproof Series Waterproof Technical Data Panel connector Panel connector, cable connector and coupler connector circular housing Locking screw connection Protection IP 65 with flat-gasket for panel
More informationWater-Proof Connectors
Water-Proof Connectors Edac s waterproof Wire-to-Wire and Wire-to-Board series was designed for both extreme moisture and nonsubmersion applications supporting both low-level signal and power applications
More information... A Vital Part of Connection World CMPTER. Cable Connectors PCB Connectors Assembly Instructions Mounting Holes MCX CONNECTORS
... A Vital Part of Connection World Cable Connectors PCB Connectors s Mounting Holes MCX CONNECTORS COPYRIGHT ELECTRONICS 0 MCX Series Coaxial Connectors DESCRIPTION MCX connector are developed in Europe
More informationJ&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.
ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology,
More informationOperating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc.
Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and technical data Series
More information125A High-Current Waterproof Connectors
125A High-Current Waterproof Connectors EV Series [Derating Curve] Features 1. Screw Cramp Reliable lock by screw and nut. Superior antivibration performance by mounting to chassis. 2. Waterproof Structure
More informationMini50 Unsealed Connector System 2.00mm Pitch
USCAR Mini50 approved interface delivers 50% space savings over traditional USCAR 0.64mm connectors, with smaller terminals to fit more lowcurrent electrical circuits in interior, unsealed, transportation-vehicle
More information1.27mm DUAL ROW STRAIGHT HEADER
1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.
More informationPH CONNECTOR. Disconnectable Crimp style connectors. Features. Specifications. 2.0mm
Crimp.mm (.") pitch PH CONNECTOR Disconnectable Crimp style connectors Emboss Tape Features This is a thin, lowprofile.mm (.") pitch connector.mm (.") in height after mounting and.mm (.1") in width. It
More informationHigh Performance Miniature Circular Connectors
High Performance Miniature Circular Connectors HR Series Features Snap lock allows for easy insertion and extraction and prevents the accidental un-mating of the connector due to vibration or impact. Nov..
More informationFine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Fine Pitch SMT Stacking Connectors (Parallel Board-to-Board) Stacking Height mm inch
Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications Fine Pitch SMT Stacking Stacking Height Guide for Parallel Board-to-Board Applications (Continued) Stacking Height
More information06. har-mik INTERFACE CONNECTORS
. INTERFACE CONNECTORS Miniature D connectors are a must in various cableto-board applications where space saving and high data transfer rates are required. For the purposes of miniaturization and speed,
More informationGeneral characteristics and technical data Series MCS
MOD M MC MCS VP 100 S Operating voltage up to 5 kvdc Operating current up to 4,5 A 2-6 high voltage contacts Quick and easy assembling Protection class IP68 acc. DIN EN 60529 General characteristics and
More informationSMB Amphenol. 50 ohm Coaxial Connectors Specifications 36 Plugs 37 Jacks 38 Bulkhead Receptacles PCB Receptacles 41-43
Description The name derives from SubMiniature B (the second subminiature design). The was developed in the 1960 s. is a smaller version of the SMA with snap-on coupling. Amphenol s connectors conform
More informationSTRAIGHT DIP SOLDER PLUG
STRAIGHT DIP SOLDER PLUG 8051 SERIES SERIES. For PCB Solder. Centronic Connector # Available in 14, 24, 36 and 50 circuits # Shell: Steel, tin plated as standard # Insulator Material: Glass filled polyester
More informationEPIC CIRCON M23 Series
M23 Series EPIC EPIC CIRCON M23 Series Application Advantage Rugged nickel-plated, die-cast zinc body Positive vibration protection for use with motor drives and moving assemblies Integral EMC cable gland
More informationORDERING INFORMATION: P/N D V I - x x x x x x x DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE C4001
DVI MALE CONNECTOR SET CABLE SOLDER & MOLDED TYPE Current Rating: 1.5 Amperes Contact Resistance: 20mΩ Max. Insulation Resistance: 1000MΩ Min. Dielectric Voltage: 500V DC Operating Temperature: -20ºc to
More information341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing
341/391 SERIES CARD EDGE CONNECTOR.100" (2.54mm) Contact Spacing 341/391 SERIES ORDERING CODE Example Part Number 341-062 - 520-2 02 Series Total Number of Contacts Contact Code Contact Rows Mounting Options
More informationTH 025 CONNECTOR SERIES
TH 025 CONNECTOR SERIES for the Automotive Industry TE AUTOMOTIVE /// TH 025 CONNECTOR SERIES TH 025 CONNECTOR SERIES for the Automotive Industry High density in limited spaces Product Features n TH 025
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Features 1. Full Lock Function dded
More informationHan K 3/0, K 3/2 / Han HC Modular. Contents Technical characteristics Han K 3/0, Han K 3/ Inserts Han K 3/0, Han K 3/
Han K 3/0, K 3/2 / Han HC Contents Page Technical characteristics Han K 3/0, Han K 3/2... 14.02 Inserts Han K 3/0, Han K 3/2... 14.03 Hoods/Housings Han 24 HPR for Han K 3/0, Han K 3/2... 14.04 Technical
More informationM40-600/620 Connectors Specification
M40-600/620 onnectors Specification range of double row mm pitch SMT male and female connectors for board-to-board stacking. Materials Mouldings: ontacts: Finish: Electrical urrent: Working voltage: Voltage
More informationSMB LOCK Introduction Characteristics Straight plugs Right angle plugs SMB limited detent (SMB-A) Receptacles...
CONTENTS PAGE SMB Introduction... 4 General... 5 Finder guide... 6 Interface... 7 Characteristics...8-9 Straight plugs...0- Right angle plugs...- Jacks... 3 Bulkhead jacks...4-5 Receptacles...6-7 PCB receptacles...
More informationMicroMate (MMCX) Amphenol Specifications
Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. Diagrams of Connectors in Combination Features Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) 1. Small,
More information- 1 - General ordering data Order No
General ordering data Order No. 1748280000 Part designation B2L 3.5/28 F SN SW Version EAN 4032248156535 Qty. 20 pc(s). PCB plug-in connector, Female connectors, Tension clamp connection, Clamping range,
More informationHigh Current, Plastic Power Supply Connectors
High Current, Plastic Power Supply Connectors EM Series Attachable to DIN rail Back mount type Front mount type Features. 4-positions with high current capability (three-phase power supply and ground)
More information3.95mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV)
.9mm Pitch Miniature Connector for Secondary Power Supply (Product Compliant to C-UL and TÜV) DF Series Full lock function added Full locking mechanism in the inner lock system Mis-insertion protector
More informationMCX Connectors Specifications Flexible Cable Semi-Rigid Cable Panel Mount PCB Mount... 22
Section Index Connectors Specifications... 17 Flexible Cable... 19 Semi-Rigid Cable... 20 Panel Mount... 21 PCB Mount... 22 Other Information Assembly Instructions... 176 Cable Assembly... 166 Cable Information...
More information305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing
305/315/355 SERIES CARD EDGE CONNECTOR.156" (3.96mm) Contact Spacing 305/315/355 SERIES ORDERING CODE Example Part Number 305-056 - 521-2 04 Series Total Number of Contacts Contact Code Insulator Style
More informationProduct Compliant to DIN41612/IEC603-2 Standard
Product Compliant to DIN41612/IEC603-2 Standard PCN Series Pin Header Side Straight through hole type PCN10EA- * *P-2.54DSA Stacking through hole type PCN10H* - * *P-2.54DSA Right angle through hole type
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Lock portion A Features 1.Reinforced lock structure
More information0.5mm and 1mm Pitch, 2.55mm Height FPC/FFC Connectors
.5mm and mm Pitch,.55mm Height FPC/FFC Connectors FH8 Series Robust locking structure Reinforced fitting provide support and prevent the actuator from disengaging from the connector. Each terminal is attached
More informationDISPOSABLE COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES
B10 CHAPTER FISCHER CORE SERIES DISPO COST-EFFECTIVE EASY TO USE MODULAR KEY FEATURES Sterilizable (EtO), gamma) Color-coded for easy integration Single or two-piece shell Lightweight and shock resistant
More informationLow Profile Swing-Lock Board to Wire Connector for Power
Low Profile Swing-Lock Board to Wire Connector for Power DF57 Series (Compliant with UL-CSA standards) Swing-Lock Structure explanatory drawing Before mating Features 1.Reinforced lock structure with swing
More informationSEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
More informationPROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
More informationMCX Amphenol. Description MCX. 50 Ohm Coaxial Connectors Specifications 18 Straight & Right Angle Crimp 19 Straight Solder & PCB 20-21
Description connectors conform to the European CECC 22220 Spec and was introduced in the 1980 s. While the uses identical inner contact and insulator dimensions as the SMB, the outer diameter of the plug
More informationAMPHENOL PCD SHENZHEN ASGTC. Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications.
AMPHENOL PCD SHENZHEN ASGTC Ruggedized Connector Series for Rail & Mass Transit and Other Harsh Environmental Applications 1 www.amphenolpcd.com.cn CONTENT CONTENT ASGTC Series Connector structure.........
More informationHigh Performance, Microminiature Circular Connectors
High Performance, Microminiature Circular Connectors HR25 Series Mated dimensions 3. 35. Diagrams of Connectors in Combination Solder type plug (HR25-*TP-**) Crimp type plug (HR25-9TP-**C) Solder type
More informationDynamic Series Connectors
3 D-1000 Series Series profile This is the smallest series in the Dynamic series. It is the perfect connector for highly reliable signal lines in industrial machinery. There are three pitches available,
More informationSMC SERIES Subminiature Coaxial Connectors
SERIES Subminiature Coaxial Connectors FEATURES Subminiature coaxial connectors with 50 Ω impedance for applications up to 0 GHz. (screw on mechanism)fulfills the subminiature coaxial connector requirement
More informationGT16 Series. Subminiature Connectors for coaxial cables
GT5 Sep.1.2018 Copyright 2018 HIROSE ELECTRIC CO., LTD. All Rights Reserved. GT10 GT7 GT3 GT32 GT17 GT11 GT36 GT26 GT21 GT19 PO5G GT16 GT13 GT16 Series Subminiature Connectors for coaxial cables
More informationSingle 2 Piece Contacts: BTB
Dissecting linear LED lighting from a connector standpoint looks very simple from far away, but up close there is no magical solution. Even though there have been new connectors developed in recent years
More informationDatasheet. BL/SL 5.08 series BLF 5.08/02/180 SN OR BX
Just as reliable as the tried-and-tested original, with innovation in detail: the BLF 5.08 the PUSH-IN version of the BLZ 5.08 female header features a new connection system and a more compact design.
More informationMiniature Waterproof Plastic Connectors
NEW Miniature Waterproof Plastic Connectors HR30 Series Mated dimensions 3.3 3 and 6 pos. 4.1 Ø15.5 Ø1.6 10 and 1 pos. Features 1. Miniature and compact design The HR30 allows for a maximum outside diameter
More informationFISCHER FREEDOM TM SERIES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationSERIES MHV (H4) HIGH VOLTAGE CONNECTORS
SERIES MHV (H4) HIGH VOLTAGE CONNECTORS DESCRIPTION CONTENTS PAGE HUBER+SUHNER MHV connectors are coaxial miniature high voltage (MHV = Miniature High Voltage) connectors with 5 kv rms test voltage (mated
More informationStac64 UnSealed connector SyStem
Stac64 A stackable connection system for unsealed applications, providing single and multi-pocket PCB solutions, offering a diverse range of circuit sizes Stac64 34729 Female Signal Receptacle 34803 CTX64
More informationMagnetic and Hydraulic-Magnetic Circuit Breaker 8340-G V
Description Single and two pole magnetic circuit breakers with trip-free mechanism and push/pull on/off manual actuation. A choice of fast magnetic only or hydraulically delayed switching characteristics
More informationCrimpmate Range pitch 5.00
Contents pitch. pitch. pitch. Male and female connectors with solder connection. Male and female connectors with crimp connection. Crimp contacts..1 pitch. RSV 1. S Derating curve RSV1. S SN Rectangular
More informationConnectors Type M DIN / IEC Catalog E /01 Edition 1
Connectors Type M DIN 41612 / IEC 60603-2 www.erni.com www.erni.com Contents General Information 3 Electrical & Mechanical Specifications for Connectors 4 Standard Male Connectors for Daughtercards 6 Standard
More informationSmall-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply
NEW Small-Sized, Low Profile 1.0mm Height, Wire-to-Board Connectors for Power Supply DF58 Series Small-sized, low profile connector 4.97mm 5.8mm 3 pos. 1mm Features 1. Small-sized, low profile connector
More informationHead-separated Digital Pressure Sensor DP5 SERIES DPH SERIES
76 ORDER GUIDE DP / configuration diagram Intermediate cable s Type Vacuum pressure Positive pressure Compound pressure Appearance An intermediate cable is required to connect the controller and the sensor
More informationAmphenol RF Interconnects
1.6/5.6 Miniature 75 ohm coaxial connectors continued Right Angle Bulkhead Jack for PCB Plug to Plug Adapter Plug to Plug U Link Adapter 1566252M1N3GT3G75 1562071A1N3GT3G75 1562076A1N3GT3G75 1566252M01RFX
More informationCMC Hybrid Connectors Standard and Power Versions
CMC hybrid connectors and mating headers provide sealed, high-density, modular and cost-effective wire-to-board and wire-to-wire connection systems for heavy-duty powertrain and body-electronics applications
More informationBroadcast. Use Solid Reliability. Return Loss Graph Lo-Pro. Environmental. Electrical. Contact. millohm
Tri-Loc Series Standardd & Lo-Pro Connectors Jacks and Plug ugs Lo-Pro Tri-Loc Connectors Full Crimp Procedure Broadcast Ideally Suited for Outdoor Use Solid Reliability Point-To-Point Solutions Specifications
More informationMMC RTX series EN3716
MMC RTX series EN3716 7 CONTENTS Page Introduction... 7-4 Application 7-4 Features... 7-4 Product overview... 7-5 Electrical characteristics... 7-6 Mechanical & environmental characteristics... 7-6 Products
More informationHPH PCB/MALE CABLE HPH SERIES PERFORMANCE/SPECIFICATION
PCB/ CABLE Straight TBS, R/A TBS, male crimp, Flex SMT, solder bucket, stacking, pin carrier Pin size/current: 0.6mm/4 amp Pitch: 1.905mm/0.075" on a staggered pitch of 0.953mm/0.0375 No. of contacts:
More information2.5mm Pitch Connector for Full Lock and Discrete Wire Connection
2.5mm Pitch Connector for Full Lock and Discrete Wire Connection DF1E Series UL, C-CL Listed Full lock function added Inner-lock system full lock mechanism Mis-insertion prevention Photo 1 Features 1.
More informationTechnical Data, 4-way. Cannon APD / ISO Connectors. Electrical Data. Mechanical Data. Environmental Data (acc. ISO 15170) Materials List
Technical Data, 4-way Cannon APD / ISO 15170 Connectors APD 4-way connectors are the original DIN72585 (now ISO 15170) versions using a 2,5 mm contact system. Designed for automotive applications they
More informationCL-3/1297 CGL INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V
CL-3/1297 INDUSTRIAL POWER INPUT CONNECTORS UP TO 700 V Contents Introduction... 2 Features... 3 How to Order... 4 Part Number Explanation... 5 Technical Data... 6 250 / 500 Volt Contact Arrangements...
More informationMetric One-Touch Fittings
Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/
More informationmcx connectors DIVIDER PAGE
mcx connectors DIVIDER PAGE 207 mcx interface dimensions A REF. PLANE A REF. PLANE B B C C H D D ØF ØG ØG ØF ØE ØE,, Design in accordance with CECC 22220 male, plug INCHES / MILLIMETERS 3 MINIMUM MAXIMUM
More informationAmphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock
Amphenol Amphenol PCD Shenzhen Excel Mate High Voltage Safety Lock www.amphenolpcd.com.cn CONTENT Excel Mate Product introduction........ 2 Excel Mate plus.... 3 1 PIN RECPTACLE........ 4 1 PIN PLUG.........
More informationK CHAPTER FREEDOM TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION FISCHER KEY FEATURES
K CHAPTER FISCHER TM SERIES EASY MATING EASY CLEANING EASY INTEGRATION KEY FEATURES No key code: 360 mating freedom & optimized cable management Membrane-sealed contacts (patent pending) Low profile IP68
More information8D Series D38999 Stainless Steel Series
Connector part numbers Basic Series 8D 0-11 K 35 P N L Locking type: None: Receptacle or plug with standard locking V: Plug with reinforced locking Shell style: 0: Square flange receptacle 7: Jam nut receptacle
More informationCoaxial Snap-Lock Connectors
Coaxial Snap-Lock Connectors Application Specification 114-13010 11 APR 13 NOTE NOTE i All numerical values are in metric units [with U.S. customary units in brackets]. Dimensions are in millimeters [and
More informationAmphenol-Tuchel Electronics 44 Series
44 Series Amphenol-Tuchel Electronics 44 Series Cost-effective environmental sealing Amphenol Tuchel 44 series connectors offer cost-effective performance for applications requiring environmental sealing.
More information38999 Series III Composite Connectors
8D Series Composite 38999 Series III Composite Connectors The RoHS connector with the best performance in weight saving and corrosion resistance for MilAero applications. MIL-DTL-38999 Standard Versatility
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Features 1. Waterproof The JR-W series is a rugged, waterproof connector series that is IP67 and IP68 rated in the mated condition. IP67: Left in water at a depth
More informationIC Sockets. OMRON s IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power. Ideal for Highspeed Data Processing.
IC Sockets XR2 OMRON s IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power. Ideal for Highspeed Data Processing. Round pins and 4-point (4-finger) contact construction
More informationREP Series. Environmentally-Sealed Rectangular Plastic Connectors
Environmentally-Sealed Rectangular Plastic Connectors REP Series Environmentally - Sealed Rectangular Plastic Connectors Optimised for use in rail and embedded applications Smiths Interconnectors REP Series,
More informationGT11 Series. Connectors for shielded cables. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines
GT 22 GT 25 GT 7 GT 6W GT 3 GT 27 GT 26 GT 19 GT 17 GT 11 PO5G GT 16 GT 10 GT 18W GT 9 GT 8 GT 15 GT 13 GT 5 GT11 Series Connectors for shielded cables Features A housing lance systems has been used to
More informationFor the plastics machinery industry Adjustable bayonet thermocouple Model TC47-AB
Electrical temperature measurement For the plastics machinery industry Adjustable bayonet Model TC47-AB WIKA data sheet TE 67.20 Applications Plastics and rubber industry For direct installation into the
More informationStandard wire insulation is glass over glass with a stainless steel overwrap. Dual and single element. MgO versions available. rubber outer jacket.
www.tcproducts.com 1-800-727-5646 Thermo-Couple Products Co. T C P engine exhaust and compressor thermocouples are available in a variety of configurations to satisfy many different requirements. The standard
More informationWaterproof Circular Connectors
Waterproof ircular onnectors JR-W Series Product Specifications Ratings Ratings Ratings urrent rating Voltage rating Operating temperature range Storage temperature range Shell size urrent rating 13 16
More informationLow Profile Connectors for AC power supply
Low Profile Connectors for AC power supply RP34L Series Receptacle installed height (3 pos.type) (2 pos.type) RP34L Existing RP34 Features 1. Low profile Receptacles are designed with their installation
More informationPCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type)
PCN10, 12, 13 Series (Product Compliant to DIN Standard: through hole,wrapping Type) Double-sided two point Contact System Features 1. Compliant with DIN Standard Comply with IEC603-2/DIN41612 standard.
More informationPicoflex. 1.27mm IDT Connector System for Ribbon Cable Applications
Picoflex 1.27mm IDT Connector System for Ribbon Cable Applications Picoflex Markets & Applications The versatile Picoflex IDT connector system is ideal for a broad range of applications across all market
More information