J&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W.

Size: px

Start display at page:

Download "J&JK SERIES SUBMINIATURE. DCONNECTOR EMI prevention shielding cover ( J cover) J COVER. Cover nut. Cover. Dimensions mm(in.) W."

Miles Carter
5 years ago
Views:

ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping

1 ccessories DCONNECTOR EMI prevention shielding cover ( J cover) SUMINITURE J&JK SERIES J COVER J cover nut Features This shielding cover is made of mild steel, formed by our advanced stamping technology, and nickel-plated. The -shaped cover completely encloses such EMI radiating areas as the connections between the connector and wires. The result is a superior shielding effect. To install the shielding cover, simply align and press the upper and lower cover elements, then tighten the nuts. It then securely grips the round cables. This cover is so compact, light and sturdy, that it can be used to cover the connectors of any input/output cable. Moreover, it is attractive in appearance. pplicable cable dimensions Cable outer diameter mm(in.) 7.0 ±0.2(.276±.008) 8.0 ±0.2(.3±.008) 10.0 ±0.2(.34±.008) 6.0 (.236) 10.0 (.34) W 10.0 (.34) W 3.0 (.118) dia. 16.6(.654) J series J-SC J-SC J-SC J-SC JK series JK-SC W 1.4(.764) 42.0(1.654) 27.6(1.087) 46.(1.847) 46.(1.630) 57.0(2.244) 57.8(2.276) 70.6(80) Q'ty / W J-SC 30.0(1.181) [42.0(1.654)] J-SC 38.0(1.46) [4.7(1.57)] J-SC 52.0(2.047) [57.0(2.244)] J-SC 68.0(2.677) [70.6(80)] Q'ty / Mild steel, copper- undercoated, nickel-plated The cover of the JK series -circuit connector is the same as that of the J series -circuit connector, except for the number of circuits indicated. The cover of the JK series -circuit connector is the same as that of the J series -circuit connector. 553

2 D SUMINITURE CONNECTOR J&JK SERIES D d 5.0 (.17) dia. Thickness 0.4 (.016) D d J-CN. 13.6(.535) 7.2(.283) 1.0(.748) Q'ty / 1,000 J-ER Material Q'ty / J-CN 8.4(.331).0(.84) 1,000 Stainless steel J-CN 18.8(.740) 10.4(.40) Material Glass-filled, PT, U4V-0, black 28.0(1.102) 1, The cover nuts, lock screws and s are used with both the J and JK series connectors. ock screw No.4-40UNC (Inch thread) M2.6 (Metric thread) M3 (Metric thread) No.4-40UNC M2.6 M3 4.5(.177) 1.7(.067) 5.7(.224) 4.5(.177) 1.7(.067) 5.7(.224) 4.5(.177) 1.7(.067) 5.7(.224) Type of screw No.4-40UNC (Inch thread) M2.6 (Metric thread) M3 (Metric thread) J-S-1C J-S-2C J-S-3C Q'ty / Use the following Model Nos. when ordering J-covers as a set. J series JK series Parts in one set Q'ty / J-C -( )C J-C-( )C J-C-( )C J-C-( )C JK-C-( )C ock screw In the above lock screw model numbers, the number in parentheses indicates the type of screw-1: Inch thread (No.4-40UNC), 2: Metric thread (M2.6), 3: Metric thread (M3). 1 pc. 1 pc. 1 pc. 2 pcs. 1 set

3 D SUMINITURE CONNECTOR J&JK SERIES J-cover assembly procedure J series JK series 7 ock screw 4 6 ock screw 5 Connector 1 Wire 2 Copper foil tape Contact Meshed wire Crimp style plug Copper foil tape Meshed wire Wire 3 ance C C ance ssembly procedure 1. Connect wires to the connector by soldering or crimping. 2. Fold back the braided shielding wire along the outside insulation and wind the copper foil tape around the shielding wire. 3. Install the connector into shielding cover. 4. lign shielding cover with shielding cover and press shielding cover until it engages the lances of shielding cover. 5. Tighten the cover nut until the predetermined position is reached. 6. Tighten the lock screws. 7. Install the s. For details of the J-cover assembly procedure, please refer to the processing specifications separately available. The shielding effect of the J-cover is critically dependent on proper assembly. Dimensions after assembly C 24.(.84) 33.32(1.321) 47.04(1.852) 63.50(2.) [4.0(1.2)] [53.0(2.087)] [64.5(2.53)] [78.5(2.01)] 13.6(.535) 13.6(.535) 18.(.744) 555

ccessories DCONNECTOR EMI prevention overmolding cover SUMINITURE J&JK SERIES MOD COVER Features This cover completely encloses all wire connections to the connector, and its braided wire crimp

4 ccessories DCONNECTOR EMI prevention overmolding cover SUMINITURE J&JK SERIES MOD COVER Features This cover completely encloses all wire connections to the connector, and its braided wire crimp section ensures a reliable ground connection. The result is excellent shielding. This cover is sturdy enough to withstand the high pressure necessary during overmolding. It can thus be finish-molded directly. pplicable cable diameter Cable O.D.mm(in.) 8.6±0.2(.33±.008) 7.6±0.2(.2±.008) 8.6±0.2(.33±.008) Contact JST for cables other than those listed above. Ferrule T, Ferrule D dia. T 8.0(.3) 0.5(.020) 4.0(.7) 11.3(.445) 0.6(.024) 8.0(.3) D dia. 7.0(.276) 10.5(.413) 0.5(.020) 0.6(.024) 4.0(.7) 8.0(.3) JK-MC-3 J-MC J-MC-4 JK-MC-3 J-MC J-MC (.638) [J-MC:24.4(.61)] 18.0(.70) 38.0(1.46) 17.4(.685) [.6(1.008)] 18.0(.70) 3.2(1.543) 18.0(.70) 18.0(.70).0(1.457)[.6(1.480)] 3.0(1.535).0(1.457)[.6(1.480)] 3.0(1.535) 7.8 (.307) 7.8 (.307) 7.4 (.21) 7.4 (.21) *Dimensions in [ the J-MC. 556 ]are those for *Dimensions in [ the J-MC. ]are those for

5 D SUMINITURE CONNECTOR J&JK SERIES Mold cover assembly procedure Contact Crimp style plug Copper foil tape raided wire Mold Thumb screw Mold cover assembly <Molded assembly> Contact JST for thumb screws. ssembly procedure 1. Processing braided shielding wire Pass the cable through ferrule and remove the insulation at the end of the cable. Install ferrule and fold back the braided shielding wire along the outside insulation. Then wind the copper foil tape around the shielding wire. 3. ssembling the mold covers lign mold cover with mold cover and press mold cover until it engages the lances of mold cover. Install ferrule over the cable holding section of the cover assembly and crimp ferrule. This completes the assembly. 2. Connecting the wires to the contacts Connect the wires to the contacts by crimping and insert the contacts into the housing. Parts name Q'ty / or bag JK-MC-3 JK-MC-3 JK-F-8.0C JK-F-11.3 Copper, tin-plated 1000 J-MC J-MC J-F-7.0C J-F-10.5 Copper, tin-plated J-MC-4 J-MC-4 JK-F-8.0C JK-F-11.3 Copper, tin-plated pplicator for the semi-automatic press P-K2N Contact Crimp applicator MKS-RG with safety cover without safety cover JK-F-11.3 PMK JK-MC PNC JK-MC J-F-10.5 PMK J-MC PNC J-MC 557

ccessories Ds SUMINITURE J&JK CONNECTOR SERIES EMI SHIEDING UMINUM DIE-CST COVER (for -circuit J series connectors) 1.0(.748) 45.0(1.772) 40.0(1.575) 55.0(2.165) 4.0(.7) M2.6 x 0.45(.018) 20.0(.787) Features Parts in one set This cover is made of aluminum die-cast.

6 ccessories Ds SUMINITURE J&JK CONNECTOR SERIES EMI SHIEDING UMINUM DIE-CST COVER (for -circuit J series connectors) 1.0(.748) 45.0(1.772) 40.0(1.575) 55.0(2.165) 4.0(.7) M2.6 x 0.45(.018) 20.0(.787) Features Parts in one set This cover is made of aluminum die-cast. The D subminiature connector and all its wire connections can be completely covered to provide excellent shielding. This EMI shielding cover can be used together with the hexagonal and rectangular metric lock screws specified in JIS-C6361. This cover is ideally suited for RS-232C cable connectors. JC-EM - 1 pc. - 1 pc. ock screw - 2 pcs. Cable clamp - 2 pcs. screws and nuts - 2 pcs. for each Clamp screws - 4 pcs. material luminum die-cast Q ty / 10 JIS STYE PSTIC COVER (for -circuit J series connectors) 1.0(.748) 45.0(1.772) 40.0(1.575) 55.0(2.165) 4.0(.7) M2.6 x 0.45(.018) 20.0(.787) Features Parts in one set Molded plastic cover. This cover can be used together with the hexagonal and rectangular metric lock screws specified in JIS-C material Q ty / JC-M s - 2 pcs. ock screw - 2 pcs. Cable clamp - 2 pcs. screws and nuts - 2 pcs. for each Clamp screws - 2 pcs. S resin

DSUBMINIATURE CONNECTOR J SERIES

DSUBMINIATURE CONNECTOR J SERIES D-sub J DSUMINITURE ONNETOR J SERIES Solder pot plug and receptacle SOLDER POT PLUG ND REEPTLE 01 Solder pot plug Solder pot Receptacle Features The receptacle contacts are formed by high-speed stamping