Cannon has combined Zero Insertion

Transcription

1 Introdution rawer rodut Introdution annon has omined ero Insertion ore (I) tehnology with remote eletrial engagement. he rawer allows the movement of a drawer or panel to effortlessly mate/unmate the onnetor halves. s an example: eletrial su-systems an e easily removed for servie, interhangaility, or portaility. y speifying rawer interonnet systems, your pakaging design is simplified as the need for expensive, ompliated, and spae-onsuming manual atuation mehanisms is eliminated. ight spae requirements no longer restrit your use of I onnetors. he ontats in the rawer produt line do not touh eah other while the onnetor halves are mating. his unique I tehnology, introdued in the annon series in the early 1970 s, has time-tested proven reliaility and duraility. he rawer s remote mating feature utilizes the axial thrust of a am to move and mate the ontats. t the end of the am travel, the am ramps on a flat surfae therey negating any unoupling fores. his rak-and-panel onnetor is availale with rimp or square post ontats, allowing ale,, or flat-flex termination. aterials and inishes 1/2 ousing rimp ontat* quare ost ontat Insulator etainer ( Only) tuating amshaft ( Only) pring ounting rew ( Only) ompression pring ( Only) lass illed thermoplasti, 94-1 rated, olor: lak opper alloy, 50µ inhes gold over 50µ inhes nikel in mating area, gold flash on alane opper alloy, 20µ inhes gold over 50µ inhes nikel in mating area, tin lead on alane opper alloy, 50µ inhes gold over 50µ inhes nikel in mating area, gold flash on alane opper alloy, 20µ inhes gold over 50µ inhes nikel in mating area, gold flash on alane tainless steel, assivated tainless steel tainless steel, assivated usi wire, zin plated *Order rimp ontats separately, see pages imensions sujet to hange

2 1 1 lasti ody 156 in onnetors rimp ontats 108,00 (4.255) 100,03 (3.938) 92,26 (3.631) 16,26 (.640) 1, 1, 1 or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 66. rimp ontats are to e ordered separately and installed y ustomer, see pages or assemly dimensions and mating sequene, see page Ø 3,03 (.119) 24,90 (.980) 7,92 (.312) 23,10 (.910) 20,10 (.792) 92,10 (3.626) art umer omenlature ,81 (5.032) 108,00 (4.255) 100,03 (3.938) 92,00 (3.622) 16,26 (.640) 24,90 (.980) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 66. rimp ontats are to e ordered separately and installed y ustomer, see pages or assemly dimensions and mating sequene, see page ,86 (1.845) 3,18 (.125) 2,03 (.080) 4, I OI, O OO 7,75 (.305) 20,32 (.800) 4 I, O OIO O OI -, OI [IO] 20,10 (.792) art umer omenlature ,10 (3.626) imensions sujet to hange 19

3 1 2 3 a a I onnetors 1 1 lasti ody 156 in onnetors quare ost ontats 1, 1, 1 108,00 (4.255) 100,03 (3.938) 92,26 (3.631) 16,26 (.640) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 66. or hole pattern, see page 60. ront emovale 0,64 (.025) quare osts 2,54 (.100) enters. or assemly dimensions and mating sequene, see page Ø 3,03 (.119) 0,64 (.025) 24,90 (.980) 7,92 (.312) 27,75 (1.093) 2,54 (.100) = 12,70 (.500) ,10 (.792) art umer omenlature ,37 (.605) ,11 (.280) 2,54 (.100) = 30,48 (1.200) 92,10 (3.626) 2,54 (.100) = 30,48 (1.200) 127,81 (5.032) 108,00 (4.255) 100,03 (3.938) 92,00 (3.622) 16,26 (.640) 24,90 (.980) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 66. or hole pattern, see page 60. ront emovale 0,64 (.025) quare osts 2,54 (.100) enters. or assemly dimensions and mating sequene, see page ,03 (2.245) 3,18 (.125) 2,03 (.080) 4, I OI O, 0,64 (.025) O 4 I, O OIO, O OO 7,75 (.305) 24,97 (.983) O OI -, OI [IO] 2,54 (.100) = 12,70 (.500) ,10 (.792) art umer omenlature ,37 (.605) ,11 (.280) 2,54 (.100) = 30,48 (1.200) 92,10 (3.626) 2,54 (.100) = 30,48 (1.200) 20 imensions sujet to hange

4 2 2 lasti ody 96 in onnetors rimp ontats 65,80 (2.592) 57,91 (2.280) 50,60 (1.994) 19,38 (.763) 2, 2, 2 or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 67. rimp ontats are to e ordered separately and installed y ustomer, see pages or assemly dimensions and mating sequene, see page Ø 3,03 (.119) 28,12 (1.108) 7,92 (.312) 23,10 (.910) 24,05 (.947) art umer omenlature ,60 (1.994) 85,72 (3.375) 65,80 (2.592) 57,91 (2.280) 50,60 (1.994) 19,38 (.763) 28,12 (1.108) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 67. rimp ontats are to e ordered separately and installed y ustomer, see pages or assemly dimensions and mating sequene, see page ,87 (1.845) 3,18 (.125) 2,03 (.080) 4, I OI O I, OIO, O OO 7,75 (.305) 20,32 (.800) O OI -, OI [IO] 24,05 (.947) art umer omenlature ,60 (1.994) 26 imensions sujet to hange

5 I onnetors 2 2 lasti ody 96 in onnetors quare ost ontats 65,80 (2.592) 57,91 (2.280) 50,60 (1.994) 19,38 (.763) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 67. ront emovale 0,64 (.025) quare osts 2,54 (.100) enters. or hole patterns, see page 61. or assemly dimensions and mating sequene, see page Ø 3,03 (.119) 28,12 (1.108) 7,92 (.312) 27,75 (1.093) 2, 2, 2 0,64 (.025) 2,54 (.100) = 17,78 (.700) ,05 (.947) art umer omenlature ,37 (.605) ,11 (.280) 2,54 (.100) = 15,24 (.600) 50,60 (1.994) 2,54 (.100) = 15,24 (.600) 85,72 (3.375) 57,91 (2.280) 50,60 (1.994) 65,80 (2.592) 19,38 (.763) 28,12 (1.108) or ontat avity arrangement, see page 68. or panel utout and mounting hole pattern, see page 67. or hole patterns, see page 61. ront emovale 0,64 (.025) quare osts 2,54 (.100) enters. or assemly dimensions and mating sequene, see page ,03 (2.245) 3,18 (.125) 2,03 (.080) 4, I OI (.100) = 17,78 (.700), O OO 7,75 (.305) 24,97 (.983) O OI - 0,64 (.025), OI O [IO] O, 4 I, O OIO ,05 (.947) O art umer omenlature ,37 (.605) ,11 (.280) (.100) = 15,24 (.600) 50,60 (1.994) (.100) = 15,24 (.600) imensions sujet to hange 27

6 ontats uss ontats 6 air/3air/1 air 1 air esigned for power distriution of more than 5 amps. ommodates #30-#18 in hole 1,29-1,14 ( ) for wire soldering. ommodates 1/8 rimp lugs for larger wire sizes. aterial: opper lloy inish: 20µ inh in mating area/ gold flash on alane (terminating end) uss ontat esription art umer 1 air air air air air air ote: or more information on tools and assemly, see pages ire ermination older ire ermination rimp ug ontats imensions sujet to hange 51

7 ontats rimp ontats oose oose 50µ inh gold ontats: eommended for all appliations. Offer the roadest amperage range. andatory for low urrent appliations (less than 100 milliamps). aterial: opper lloy inish: old over nikel xtration ool: Insertion ool: one equired (ump) (lat) 50µInh old ump 50µInh old lat and 20µInh old ire ommodation 36 thru * 28 thru thru thru thru ote: or more information on tools and assemly, see pages on Insulation upport + old in lots of 100 piees. or low urrent appliations (less than 100 milliamps) use 50µ inh gold (ump) ontat on plug side and 50µ inh flat gold (flat) ontat on reeptale side. ontat atory for tool. * inish: 20µ inh gold in mating area/old flash on alane (terminating end). inish: 20µ inh gold in mating area/in lead on alane (terminating end). (ump) (lat) and ool (age 55) O IO O IO ontats 52 imensions sujet to hange

8 ools and ssemly ease utomati ooling orth meria* -607 neumati rimper he -607 is a pneumati powered and ontrolled mahine. It is designed for ustomers with moderate volume. his mahine is designed to semi-automatially rimp stamped and formed ontats onto pre-stripped stranded or single ondutor eletrial wire. his mahine will aommodate size 34 thru 12 wire and is atuated y the use of a foot pedal. ahine rimp ate: 800 per hour ower equirements: neumati = 100 psi, 2 u. ft. per min he -500 niversal annon rimp ie, is a flywheel driven, eletronially ontrolled mahine that is designed to semi-automatially rimp stamped and formed ontats on stranded or single ondutor, pre-stripped wire. his mahine will aommodate size 34 thru 12 wire. he primary appliation of this mahine is for terminating disrete, pre-stripped, wire. he mahine is atuated y the use of a foot pedal. ahine rimp ate: 1300 per hour ower equirements: letrial = 115, 60 z, he -620 niversal annon rimper/tripper is a pneumati powered, miroproessor ontrolled mahine. It is designed to semiautomatially strip insulation from stranded or single ondutor eletrial wire and attah a stamped and formed ontat y rimping. he mahine will aommodate 34 thru 12 wire. rimary appliation of the mahine is the termination of jaketed ale where the individual leads annot e stripped y fully automated equipment. he -620 operates automatially upon insertion of a wire or it an e swithed over to foot pedal operation as desired. ahine trip/rimp ate: per hour ower equirements: letrial = 115, 60 z, 20 neumati = 80 psi, 3 u. ft. per min. *or other geographial regions, ontat annon for details. ools and ssemly imensions sujet to hange 59

9 // 1/1/1 rinted iruit oard ole atterns 1-156/1-156 Ø 9,52 (.375) I O a ,54 (.100) = 12,70 (.500) O O-I 1,09-0, Ø ( ) Ø 0,13 (.005) O a = 16,26 (.640) 12 2,54 (.100) 30,48 (1.200) O O-I 16,51 (.650) 3,30-3,05 4 Ø ( ) Ø 0,25 (.010) O 100,02 (3.938) 12 2,54 (.100) = 30,48 (1.200) O O-I ,63 (.143) 20,32-19,81 ( ) 5 2,54 (.100) = 12,70 (.500) O O-I 20,32-19,81 ( ) 4 3,63 (.143) 40,89-40,39 ( ) 12 2,54 (1.00) = 30,48 (1.200) O O-I Ø 9,52 (.375) I O a ,20-91,69 ( ) 3,18-2,92 ( ) 156 Ø 1,09-0,94 ( ) Ø 0,13 (.005) O a ,51 (.650) 12 2,54 (1.00) = 30,48 (1.200) O O-I 1 eader s esoure otes: ontat hole avity identifiation shown is typial as viewed from top surfae of.. oard. ll plug layout dimensions not shown are similar to the reeptale dimensions. lated through () hole diameters shown are for 0,64 (.025) post ontats. / ontat plated through () hole diameters are 0,79-0,64 ( ). or pad layout onfiguration, see page imensions sujet to hange

10 / / anel utouts and ounting ole atterns 1-156/ /2-96 equired for enter ounting olarization Only equired for enter ounting olarization Only 3-60/ / eader s esoure imensions sujet to hange 65

11 1 anel utouts and ounting ole atterns ,19 (.990) I 16,38-16,13 ( ) 4 Ø 3,30-3,17 ( ) 92,71 (3.650) I 100,15-99,90 ( ) 4 3,56 (.140) ront anel ridge 23,37 (.920) I 6,53-6,40 ( ) 2 Ø 5,21(.205) 4 O I O 92,71 (3.650) I 100,15-99,90 ( ) 127,81 (5.032) 5,74-5,66 ( ) ear anel ridge iew 9,91-9,40 ( ) 8 3,56 (.140) 16,38-16,13 ( ) Ø 3,81-3,56 ( ) 9,91-9,40 ( ) iew eader s esoure 66 imensions sujet to hange

12 2 anel utouts and ounting ole atterns ,45 (1.120) I 19,51-19,25 ( ) 4 Ø 3,30-3,17 ( ) 51,31 (2.020) I 58,04-57,78 ( ) 4 3,56 (.140) 2-96 ront anel ridge 2 3,81-3,56 ( ) 6,53-6,40 ( ) 8,13-7,62 ( ) 23,37 (.920) I 2 Ø 5,21 (.205) 4 O I O 8 3,56 (.140) 51,31 (2.020) 19,51-19,25 ( ) 58,04-57,78 ( ) 85,72 (3.375) 5,74-5,66 ( ) ear anel ridge iew 9,53-9,14 ( ) 4 1,02 (.040) Ø 3,81-3,56 ( ) 8,13-7,62 ( ) 2 3,81-3,56 ( ) 4 1,02 (.040) iew 9,53-9,14 ( ) eader s esoure imensions sujet to hange 67

13 / ontat avity rrangements ear iew / eader s esoure imensions sujet to hange 69