Duct suspensions & Support systems
|
|
- Oscar Stafford
- 5 years ago
- Views:
Transcription
1 lindab duct suspension & support system Duct suspensions & Support systems Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods Other circular products Transfer Rectangular Flexible ducting Isol Access doors Smart tools Duct suspensions & Support systems Fastening material Index
2 lindab duct suspension & support system Content Duct suspensions & Support systems Duct suspension Suspension band FB... DRSN... DRSNR... Rectangular plain washer RPW... Channels and channel brackets Cantilever CL... Threaded rod OSB... Supported cantilever CLS... Hexagonal studding connector OSM... Channel RPA... 0 RPC... 0 Eye bolt EB... Channel nut without spring CN... Circular suspension Duct support FA... Channel nut with spring CNS... Suspension rings UV, UV0... Channel nut long spring CNLS... UVH, UVH0... We reserve the right to make changes without prior notice
3 lindab duct suspension & support system Channel nut short spring CNSS... Four hole joining plate TS0... Haer head bolt HHB... 0 joining plate TS0... Haer top screw HTS... T joining plate TS0... Channel end cap CEC... Two hole 0 bracket TS... Channel framing system External plate TS00... Three hole 0 bracket TS... Two hole joining plate TS0... Four hole 0 bracket TS... Three hole joining plate TS0... Four hole 0 bracket with gusset TS... We reserve the right to make changes without prior notice
4 lindab duct suspension & support system Extern angle bracket TS... Brackets L-fastener WCL... Internal angle bracket TS... Fastening bracket WCLT... Window bracket TS... L-fastener with vibration damper WCLGM... Beam clamp TS... Z-fastener WCZ... Purplin clips TS... Z-fastener with vibration damper WCZGM... Two hole base plate TS... Sheet metal roof attachment without nut with rubber WCVG... One hole base plate TS... Beam clamp BCT... BC... Cantilever arms, universal TS0...0 We reserve the right to make changes without prior notice
5 lindab duct suspension & support system Frame support system Square tube SSR... Corner X SSKV... T-piece SSTP... Pipe cover, inside SBEI... Support foot SSF... Pipe cover, outside SBEU... Adjustable foot SSFA... Gripple hang fast system Fast hanging wire kit loop FHL... Corner piece Angle int. and ext. SSH... SSB... Fast hanging wire kit stud Fast hanging wire kit toggle FHS... FHT... 0 Angle 0 SSB... Fast hanging plastic sleeve FHPS... 0 Wall attachment SSVA... We reserve the right to make changes without prior notice
6 lindab duct suspension & support system Fast hanging wire kit eyelet FHE... Fix-it foot FIF... Fast hanging wire kit 0 eyelet FHE0... Corner sadel FHCS... Wire rope cutter WRC... Wire rope twister WRT... Support systems H frame HFS... Multi foot MULTIF... Anti vibration mat MFAV... We reserve the right to make changes without prior notice
7 lindab duct suspension & support system Duct suspension FB ensions FB 0, Ø, Ø, FB 0 0, Ø,0 Ø,0 Ø, 0, FB 0, Ø, Ø, Ø, 0 0, Description Suspension band Suspension bands are designed to suspend air ducts. It is easy to cut and bend and allows a quick and economical method of assembly. The perforated suspension steel band is made of steel with assorted holes, which, according to the type selected, allow fixing of threaded rods, threaded clamps, bolts, etc. The small holes can be used with rivets, screws or nails. Width m Material 0, galvanized 0 0, galvanized 0, galvanized, galvanized 0 0, stainless 0,0 stainless FB, FB 0 0, FB 0,0 Ø, Ø, Ø, Ø, Ø, Ø, Ø, 0 0 0,, 0,,0 Width FB 0, We reserve the right to make changes without prior notice
8 Duct suspension RPW Rectangular plain washer Surface finish: Hot dipped galvanized. Ød b b Ød 0 b ension RPW RPW FB OSB Threaded rod Surface finish: Electro zinc plated. M 00 M 000 M 000 M 00 M 000 M 000 M 00 M 000 M 000 M 00 M 000 M 000 ension OSB 000 We reserve the right to make changes without prior notice
9 l lindab duct suspension & support systems Duct suspension OSM Hexagonal studding connector Used together with threaded rod to reduce wastage to a minimum. Threaded in both ends with a stop in the middle. Surface finish: Electro zinc plated. M 0 M 0 M 0 M 0 ension OSM 0 EB Eye bolt Surface finish: Electro zinc plated. Ød M, M, Ød M, ension EB We reserve the right to make changes without prior notice
10 Duct suspension FA Duct support Used to fix ducts standing on joists. Is provided with fixing holes in the base. Ød nom A Varying height can be arranged by installing two duct supports, one inside the other. These can be locked with two self-tapping screws on each short side. The L dimension can then vary: for Ø 0 between 0 and 00, for Ø 0 between 0 and 0. Can also be delivered in additional sizes. B L ension FA 0 0 L Ø d A B We reserve the right to make changes without prior notice
11 Circular suspension UV, UV0 Suspension rings For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. Ø A t Ød B Ød nom t Can also be delivered in additional sizes. UV ØA B t UV0 ØA B 0,, 0 0,00,,, 0,00,,, 0 0,00,,0, 0 00,00,,0, 0 0,00,,0, 0,00,,0, 0 00,00,,00, 0 00,00,,00, 0 0,00,,00, 0,00,,00, 0 00,00,,00, 0 00,00,,00, 0 0,00,,00, 0 ension UV 0 We reserve the right to make changes without prior notice
12 Circular suspension UVH, UVH0 Suspension rings For suspension of circular ducting. At insulated duct it is recoended that the suspension ring is mounted inside the insulation. 0 ØA t Ød N.B. Is sold in pairs. B Ød nom t UVH ØA Can also be delivered in additional sizes. B t UVH0 ØA B 0,00,,, 0 0,00,,, 0,00,,, 0 0,00,,, 0 00,00,,, 0 0,00,,0, 0,00,,0, 0 00,00,,00, 0 00,00,,00, 0 0,00,,00, 0 00,00,,00, 0 00,00,,00, 0 0,00,,00, 0 ension UVH 0 We reserve the right to make changes without prior notice
13 lindab duct suspension & support system Circular suspension DRSN ensions Ø 00 Ø0 0 t Ød t Ød t Description For suspension of circular ducting. Combined connection nut M/M and slotted quick closure for Ø 00. Connection nut M for Ø 0 0. ension Ød DRSN 0 Ø 00 With slotted quick closure. With screw PH M 0. Ø0 0 With Ø hole. With bolt and nut H M 0. Ød nom t Connection nut typ m kg, M+M 0, 0, M+M 0,, M+M 0, 0, M+M 0, 0, M+M 0,0 0, M+M 0, 00, M+M 0,, M+M 0, 0, M+M 0, 0, M+M 0, 00, M+M 0,, M+M 0,, M+M 0, 00, M+M 0, 0, M 0, 00, M 0, 0, M,00 00, M,0 0, M 0,, M, 00, M, 00, M, 00, M, 0, M,00 0, M,0 We reserve the right to make changes without prior notice
14 lindab duct suspension & support system Circular suspension DRSNR ensions Ø 00 Ød t Ø0 0 Ød t Description For suspension of circular ducting. With vibration-damping inter-nal lining of EPDM rubber. Combined connection nut M/M and slotted quick closure for Ø 00. Connection nut M for Ø 0 0. ension Ød DRSNR 0 Ø 00 With slotted quick closure. With screw PH M 0. Ø0 0 With Ø hole. With bolt and nut H M 0. Ød nom t Connection nut typ m kg, M+M 0, 0, M+M 0, 0, M+M 0,, M+M 0, 0, M+M 0, 0, M+M 0, 0, M+M 0, 0, M+M 0,0 00, M+M 0,, M+M 0, 0, M+M 0, 0, M+M 0, 00, M+M 0,0, M+M 0,, M+M 0, 00, M+M 0, 0, M,0 00, M, 0, M, 00, M,0 0, M,0, M,0 00, M,0 00, M,00 00, M,0 0, M,0 0, M,0 We reserve the right to make changes without prior notice
15 Channels and channel brackets CL Cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile. 0 l 0 Ø CL 00 CLS Supported cantilever Material: Hot dipped galvanized. To be fixed of walls, floors and ceilings as an assembly profile.the diagonal support bar makes it suitable for heavy loads. a b l 0 a b CLS 00 Ø We reserve the right to make changes without prior notice
16 Channels and channel brackets RPA Channel Surface finish: Electro zinc plated. SLOT/ PLAI A B SLOT SLOT t A c/c 0 B B ension A B Type RPA SLOT c/c Ø,, B RPC Channel Surface finish: Electro zinc plated. Available as plain or slotted. A B SLOT/ PLAI t 000 PLAI, 000 PLAI, 000 SLOT, 000 SLOT, 000 PLAI, B 000 PLAI, 000 SLOT, A 000 SLOT, 000 PLAI, 000 PLAI, t =, c/c SLOT, 000 SLOT, 000 PLAI, 000 PLAI, 000 SLOT, t =, A B 000 SLOT, ension A B Type RPC 000 SLOT, 0 We reserve the right to make changes without prior notice
17 Channels and channel brackets Channel slide nuts Channel slide nuts and springs are self aligning and are specially manufactured to complement the range of RPC channels. The slide nut can be moved along the channel for ease of alignment whilst the springs tension the nut against the internal channel lips to facilitate installation. In addition to the shape of the slide nuts prevents turning inside the channel eliminating the need to grip the nut whilst inserting bolts or threaded rod. CN Channel nut, without spring ension CN CNS Channel nut with spring ension CNS CNLS Channel nut long spring ension CNLS We reserve the right to make changes without prior notice
18 Channels and channel brackets CNSS Channel nut short spring ension HHB Haer head bolt ension HTS Haer top screw ension CNSS HHB 0 HTS 0 We reserve the right to make changes without prior notice
19 Channels and channel brackets CEC Channel end cap for channel for channel For cannel CEC We reserve the right to make changes without prior notice
20 Channel framing system The Lindab channel framing system is designed to provide an effective yet economical solution to today s framing and support requirements. The TS fittings are used together with the RPC channels. All TS fittings are generally manufactured from thick steel strip and hot dip galvanised to BSENISO: unless otherwise indicated. Standard hole diameter. TS00 External plate Available in and hole clearance thick 0 ension TS0 Two hole joining plate TS TS0 TS0 Three hole joining plate 0 TS0 TS0 Four hole joining plate 0 TS0 We reserve the right to make changes without prior notice
21 Channels and channel brackets TS0 0 joining plate TS0 T joining plate TS0 0 TS0 0 TS Two hole 0 bracket 0 TS TS Three hole 0 bracket TS TS Four hole 0 bracket TS 0 We reserve the right to make changes without prior notice
22 Channels and channel brackets TS Four hole 0 bracket with gusset TS 0 TS Extern angle bracket Angles available TS TS Internal angle bracket Angles available TS 0 TS Window bracket Maximum loading 0 kg ension TS We reserve the right to make changes without prior notice
23 Channels and channel brackets TS Beam clamp 0 0 TS TS Purlin clips Mild steel zinc plated Clearance hole allows for M. TS TS Two hole base plate 0 TS 0 0 TS One hole base plate 0 0 TS 0 0 We reserve the right to make changes without prior notice
24 Channels and channel brackets TS0 Cantilever arms, universal Back plate thick TS0 0 We reserve the right to make changes without prior notice
25 Brackets WCL L-fastener Surface finish: Electro zinc plated. l l Ø 0 ension WCL WCLT Fastening bracket Surface finish: Electro zinc plated. l 0, 0, 00, l Ø, ( ) ension WCLT WCLGM L-fastener with vibration damper Quick fixing of rectangular ducts. Supplied with sound reduction mounting compliant with DIN. Fixing with blind rivets or self drilling screws. Easy height adjustment by using M threaded rod and hex nuts. Material x,0. Surface finish: Electro zinc plated. Ø Ø, WCLGM We reserve the right to make changes without prior notice
26 Brackets WCZ Z-fastener Surface finish: Electro zinc plated. Ø ension WCZ WCZGM Z-fastener with vibration damper Quick installation of rectangular ducts. Supplied with sound reduction mounting compliant with DIN. Fixing with blind rivets or self drilling screws. Easy height adjustment by using M threaded rod and hex nuts. Material x,0. Surface finish: Electro zinc plated. 0 Ø Ø, WCZGM WCVG Sheet metal roof attachment without nut with rubber Suspension bracket designed to suspend ductwork with threaded rods of maximum. Allows fixing against trapeze type ceilings. Supplied with a moulded elastomeric element which prevents the transmission of vibrations. For best vibration isolation, load should not exceed 0 kg. Material: x,. Surface finish: Electro zinc plated. 0 Ø Ø Ø 0 WCVG zawiesie typu R (blacha trapezowa) R suspension L suspension zawiesie typu L Z zawiesie suspension typu Z 0 We reserve the right to make changes without prior notice
27 Brackets Beam clamp To fix on to beams without welding or drilling. With hexagon head screw DIN., threaded end with cup point according to EN ISO and locknut DIN. Available as threaded (BCT) or not threaded (BC). Material: Body made of malleable cast iron, zinc plated, casting tolerance acc. to DIN GTA /. BCT Threaded rod hole. Ød M M M BC Not threaded rod hol.e Ød Ød ension BCT We reserve the right to make changes without prior notice
28 Frame support system Stand system Consisting of square tubes and a number of parts which are used to create a range of different structures. This stand system is made up of square tubes in accordance with DIN and materials in accordance with SIS. The load diagram indicates the maximum permissible load with regard to flex sensing and does not take deflection into account. The diagram indicates the maximum permissible load for different distances between the supporting legs without exceeding the limit load in accordance with the Swedish Fatigue Design Code for Welded Structures, StBK-N, static load. This load diagram is applicable to all horizontal tubes with their associated supports, provided that there are no lateral forces. Load, kg B A 00 Square part SSTP Square tube SSR 0 0 c/c for support, m 0,,0,,0,0 0 0 A = Extended, evenly distributed static load tubes x x, B = Centrically applied static spot load x x, Example Load 0 kg, distributed evenly Stand tube x gives a max c/c between supporting legs of, m SSR Square tube Surface finish: Hot dipped galvanized., 000 SSR We reserve the right to make changes without prior notice
29 Frame support system SSTP T-piece Surface finish: Electro zinc plated. 0 0,0 SSF Support foot Surface finish: Electro zinc plated. 0 0,0 SSFA Adjustable foot Surface finish: Electro zinc plated. 0 0,0 SSTP SSF SSFA SSH Corner piece Surface finish: Electro zinc plated. 0 0,0 SSH We reserve the right to make changes without prior notice
30 Frame support system SSB Angle internal and external Surface finish: Electro zinc plated. SSB Angle 0 Surface finish: Electro zinc plated. SSVA Wall attachment Surface finish: Electro zinc plated. SSKV Corner X Surface finish: Electro zinc plated. 0 0,0 Angle 0 0,0 Angle 0 0,0 0 0,0 SSB SSB 0 SSVA SSKV We reserve the right to make changes without prior notice
31 Frame support system SBEI Pipe cover, inside Material: Plastic. for square tubes for square parts SBEU Pipe cover, outside Material: Plastic. for square tubes for square parts SBEI SBEU We reserve the right to make changes without prior notice
32 Gripple hang fast system Fast hanging wire kit Each kit comprises a of steel wire rope with a choice of different end fixings, a rope grip to adjust the free end, and a setting key. Hangers are available as standard in load related sizes. Each size is designed to carry a specific weight range and has a designated safe working load (SWL). Size Working load span kg 0 kg Stainless spring type 0 S Locking wedge Wire rope entry hole Zink housing Serrated teeth FHL Fast hanging wire kit loop For looping around purlins, beams, roof trusses and other accessible building features. Size Size FHS 000 We reserve the right to make changes without prior notice
33 Gripple hang fast system FHS Fast hanging wire kit stud For anchoring into concrete ceilings, metal decking and pressed metal brackets (with nuts). Supplied with drop in anchors or nuts as required. Size Type 00 M 000 M 000 M 000 M 000 M 000 M 00 M 000 M 000 M 000 M 000 M 000 M 000 M 000 M 000 M Size Type FHS 000 We reserve the right to make changes without prior notice
34 Gripple hang fast system FHT Fast hanging wire kit toggle For anchoring into profile roof cladding, light fixings, luminaries and other pre-drilled structures. Toggle end fixing is an integral part of the wire, requiring no additional accessories. Size m Size FHT 000 FHPS Fast hanging plastic sleeve Protective black plastic sleeve tubing to further reduce risk of condensation. Colour: Black. m Suits size Size FHPS We reserve the right to make changes without prior notice
35 Gripple hang fast system FHE Fast hanging wire kit eyelet For attachment to a variety of applications that require bolting to brackets or fixtures. Eyelet end fixing is an integral part of the wire, requiring no additional accessories. Size Size FHE0 Fast hanging wire kit 0 eyelet For fixing into concreat, steel and wood using gas and power actuated tools or fixing screws. Eyelet end fixing is an integral part of the wire, requiring no additional accessories. Size Size FHE 000 FHE0 000 We reserve the right to make changes without prior notice
36 Gripple hang fast system FHCS Corner Saddle A right-angles reinforcement moulding for positioning and supporting wire ropes, sizes no to no. Standard or magnetic version. Material: Plastic. Type Standard MAGN Type FHCS MAGN WRC Wire rope cutter A purpose-made tool for cutting wire rope. Suitable for use on the Gripple ranges sizes. Hardened jaws for durability. WRT Wire rope twister For securing wires tails, and make a tidy finish. Suitable for use with sizes no. and. WRC WRT 0 We reserve the right to make changes without prior notice
37 lindab duct suspension & support system H Frame Support System HFS A x B Description The Lindab H frame set is a quick, versatile and economical solution for supporting ductwork, pipework or cable trays. Using the inserts supplied the feet are adapted to accoodate channel support system RPC (not included in kit). Construction The Lindab Big Foot plastic mounting feet for the modular framework system are manufactured from UV protected Nylon B0L 0% Glass fibre filled. Metal components are manufactured from hot dipped galvanised steel and comply with EN S J0H, EN S JH & EN S JH. Type A B C m kg 0 0 0, ,0 Kit Includes Feet AV mats Channel inserts L-Brackets M Bolts Square channel nuts Kit does not include channel Options Available with either 0 or 0 square feet depending on the load requirements. Maximum Loads Maximum load per 0 Leg Assembly 0 kg Maximum load per 0 Leg Assembly 0 kg C ension HFS 0 We reserve the right to make changes without prior notice
38 lindab duct suspension & support system Multi Foot MULTIF Anti Vibration Mat MFAV Description The Lindab Multi Foot is designed to be a multi-purpose ductwork, cable and pipework support. The Multi Foot is an extremely versatile and cost effective one piece support available in two sizes with optional antivibration mats. When used with Lindab s Support Channel and Threaded Rod (not included) the Multi Foot provides a complete support solution for a host of applications from cable trays to ductwork Designed to channel 0 wide channel (horizontally) threaded (vertically) Width Height Weight kg Max Load kg , , Max recoended load is based on each foot producing a loading of,0 kn/m, if conditions allow, the maximum load per foot is 00 kg. Construction The Lindab Multi Foot plastic mounting feet are manufactured from Polypropylene 0% Glass fibre filled. Application Suitable for internal or external applications in temperatures between -0 C to +0 C. Optional Multi Foot Antivibration Mat 00 MFAV Multi Foot Antivibration Mat 00 MFAV Weight kg 00 0, 00 0, Construction The antivibration mats are manufactured from Styrene Bytadiene Rubber (SBR). Application Suitable for internal or external applications in temperatures between -0 C to +0 C. ension MULTIF 00 ension MFAV 00 We reserve the right to make changes without prior notice
39 lindab duct suspension & support system Fix-it Foot Support System FIF Description The Lindab Fix-it Foot are available in three sizes, each has a 0 0 aluminium channel recessed into the top face allowing fixing of the services resting across the feet. Construction The Lindab Fix-it Foot is pressure moulded using a one or two part mix, utilising milled, sieved and grade Styrene Butadiene Rubber (SBR-Recycled Rubber) bound with a ratio of high quality moisturecuring Polyurethane Pre-Polymer. Multi Foot Width Height Weight kg Max Load kg 0 0 0, , , 0 ension FIF 0 We reserve the right to make changes without prior notice
Duct suspensions & Support systems
lindab duct suspension & support system Duct suspensions & Support systems Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods
More informationTecstrut Channel Suspension & Framing System
lindab I the ventilation products specialist Tecstrut Channel Suspension & Framing System Complies with HVCA specification DW144. Manufactured from corrosion resistant materials. Channels produced in accordance
More informationElectrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
More informationSimply a better way BIG FOOT SYSTEMS. Rooftop building services support systems.
Simply a better way BIG FOOT SYSTEMS Rooftop building services support systems Simply a better way ABOUT US Big Foot Systems are the largest rooftop free-standing frame manufacturer in the world. Launched
More informationSECTION PIPE HANGERS AND SUPPORTS
Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the
More informationCable Hanging Systems SYSTEMS. Display with Elegance
Cable Hanging Systems SYSTEMS Display with Elegance Table of Contents HF RANGE LOOP.... HF RANGE TOP HAT... HF RANGE HOOK....4 T ANGEL...5 ANGEL SIGNAGE...6 ANGEL SIDE EXIT FEMALE /4"...7 ANGEL SIDE EXIT
More informationBIG FOOT SYSTEMS ANCILLARIES. Rooftop building services support systems. Simply a better way. +44 (0)
BIG FOOT SYSTEMS ANCILLARIES Rooftop building services support systems +44 (0)1323 844 355 enquiry@bigfootsupport.com Simply a better way @bigfootsystems 1 AIR CONDITIONING ANCILLARIES RANGE CONTENTS intro
More informationPART NUMBER POLE DIAMETER RANGE CARTON QTY " to 5" " to 6 3 4" " to 7 3 4" " to 8 3 4" 10
PH1 Offset Pole Band Bands Single Double Offset Pole Bands are used for dead-ending, guying, and mounting secondary racks on metal poles, pipe masts, or conduit. Each Pole Band Assembly contains two 1
More informationAFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
More informationlindab we simplify construction LindabSmoke control system single compartment Duct and fittings, Smoke control dampers Mounting instruction
lindab we simplify construction LindabSmoke control system single compartment Duct and fittings, Smoke control dampers Mounting instruction Duct and fittings Content Duct and fittings Introduction...3
More informationargco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
More informationThe GK units differ from the LK units in that the springs of the GK units have a spring eye at the front.
01 09 Installation guidelines Mechanical suspension units GK LK GN0032-0 Mechanical suspension units GK LK The GK units differ from the LK units in that the springs of the GK units have a spring eye at
More informationPRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and
More informationCustom Metal Fabrication - HVAC Air Duct and Fittings
Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
More informationABOUT KJN ALUMINIUM PROFILES
P R O D U C T C ATA L O G U E ABOUT KJN ALUMINIUM PROFILES Our range of Aluminum Profile is available in a large range of sizes starting with 20 x 20 through to 100 x 200 making it suitable to use in all
More informationSwifts SW strength, speed and flexibility
Swifts SW strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE Global vision... 21st Century solutions Established in the UK since 1972, Legrand is a world leading manufacturer of products
More informationMechanical System Hanger
D U C T M A T E U.S. Patent No. 7,222,824 Mechanical System Hanger Seismic Tested & Conforms to ICC Code Guidelines EG284 May be used on a variety of mechanical systems Steel Cable & Clutcher mechanism
More informationCustom Metal Fabrication - HVAC Air Duct and Fittings
Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
More informationCOLIBRI Ceiling QUICK FACTS. Square ceiling diffuser with discs for supply air
Square ceiling diffuser with discs for supply air QUICK FACTS Adjustable discs flexible spread pattern Can be used for vertical air diffusion Swirl function Also available in the Extract air version Designed
More informationElectrical Applications. Metal Framing & Cable Tray Superstrut Metal Framing System. Column A. Design Data: Materials: Column B
Electrical Raceway Series 800 Surface Raceway and Lighting Systems Superstrut channel together with snap-in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More informationSpring Steel Fasteners
BB15 BB10-3 BB423-208 BB10L BCH32 BCH32X BCH32-F3 KIT BCH32-U-5-8 BCH32-A28 BW2-CT2 BCH32-3S BCH32-F4 BCH32-C2 BCH32-W2 BRS-32A BCH32-SC4 BCH-32-4T-C1 BCH-32-4T-A6 BR-32-4T-U-5-8 BR-32-4T-W2 233 Cooper
More informationSeries 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
More informationFord Fabricated Steel Products
Ford Fabricated Steel Products Section N2 12/2000 The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487 Overseas
More informationAncillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel.
78 FIG. 222 FIG. 283 FIG. 1 04/ U BOLT (GRIPPED) Nom A C D T L Load 15 21.3 7 28 6 25 37 220 20 26.9 33 6 25 40 220 25 33.7 40 6 25 43 220 32 42.4 53 35 49 545 40 48.3 16 60 35 56 545 50 60.3 16 71 35
More information229 B-Line series Pipe Hangers & Supports
accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged
More informationSeries 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
More informationProduct catalogue. Mechanical accessories for pumps and mixers
Product catalogue Mechanical accessories for pumps and mixers Contents Mixer accessories Single guide bar system...4 Double/tripod guide bar system...9 Cantilever system...14 Bottom fixing plate system...15
More informationSeries 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
More informationSwifts SW. strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE
Swifts S strength, speed and flexibility STEEL IRE CABLE TRAY / PRODUCT GUIDE Global vision... 2st Century solutions Established in the UK since 972, Legrand is a world leading manufacturer of products
More informationProduct Specifications PIPE SUPPORT PRODUCTS
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43
More informationSales Office: Capillary Tube. Refrigeration Quality Copper Tube. Copper Tube
Capillary Tube Refrigeration quality annealed Capillary Tube in 30m Coils Bore Wall A710.026 i.d. x.022 A711.031 x.022 A712.036 x.0195 A713.042 x.0215 A714.047 x.019 A715.052 x.019 A716.064 x.023 Refrigeration
More informationGeneral purpose standard grade wallplugs for use with screw fixings.
WALLPLUGS & FRAME ANCHORS Wallplugs Plastic CODE COLOUR DRILL SIZE BOX per/1000 GNF01 Yellow 5.00 100 9.12 GNF02 Red 5.50 100 10.15 GNF03 Brown 7.00 100 12.20 GNF0 Blue 10.00 100 33.10 Wallplugs Nylon
More informationVOLUME CONTROL / REGULATING DAMPERS
VOLUME CONTROL / REGULATING S PRODUCT RANGE Model Range Includes A - Multi-Leaf. (Flanged - Rectangular Duct) B - Multi-Leaf. (Slip joint / Spigot - Rectangular Duct) C - Multi-Leaf. (Slip joint / Spigot
More informationSteel Framing Systems
Steel Framing Systems Total Cable Management Solutions BS-EN-ISO 9001:2000 QULITY MNGEMENT SYSTEM Kazakhstan - 090301 Republic of Kazakhstan, West Kazakhstan Oblast, ksai, Pramzone, BKKS office complex
More informationSeries HCD Airfoil Control Damper
Series HCD Airfoil Control Damper Model: HCD-1 The Holyoake HCD-1 is a precisely made volume and pressure control device with extremely low leakage when closed, (in the range of 0.003m 3 /s at 100 Pa).
More informationPRODUCT CATALOG TPS UNI-COUPLING. Your repair is our care
PRODUCT CATALOG TPS Your repair is our care UNI-COUPLING HIGH FLEXIBILITY AND SAFETY MARGINS DETERMINE THE BASIC PRINCIPLE OF UNI-COUPLING Two types of UNI-Coupling UNI-Coupling applies one unique technical
More informationCable Hanging System. Labor-saving, versatile means for hanging static load HVAC Systems. U.S. Patent No. 7,222,824
D U C T M A T E U.S. Patent No. 7,222,824 Cable Hanging System Labor-saving, versatile means for hanging static load HVAC Systems Meets SMACNA upper and lower attachment construction standards if used
More informationKROFTMAN CONTAINER SHELTER TC812
KROFTMAN CONTAINER SHELTER CONTENT FRAME P82-FR 82-0 82-02 82-03 82-0 82-05 82-06 82-07 parts list frame part numbers main frame base plan, frame plan available hight inside detail 0 detail 02, 03 Roof
More informationACCESSORIES STEPS AND FOOT PINS
ACCEORIE TEP AND FOOT PIN Hang-on step for rung ladders For rung dimensions 30 x 30 mm. For ladders with an internal width of at least 300 mm. Rung spacing 280 mm. tep width 300 mm. tep depth 255 mm. Maximum
More informationHistory. Quality Assurance. Applications. Protection against corrosion. Reduced installation
2 History The E-Klips spring steel fasteners range has been manufactured in the UK for over 25 years. Formely known as Furse Fastway they offer a quick, easy and reliable method of fixing services to steelwork
More informationEARTH WIRE FITTINGS 08
EARTH WIRE FITTINGS 08 8 EARTH WIRE FITTINGS 119 Contents General... 120 C-bracket... 123 Suspension clamp with bolt, with straps, for steel and copper conductors... 123 Suspension clamp with bolt, with
More informationHANG- EN SLUITWERK. Speciale producten 2. Reken op ons.
HANG- EN SLUITWERK Speciale producten 2 Auerhaan Lelystad is een bedrijf met een zeer lange historie; opgericht in 1885, is het bedrijf een bekende en betrouwbare toeleverancier van producten voor de carrosseriebouw,
More information10. Universal Clips. 254 Product overview 2013 We reserve the right to change designs and technical specifications of our products.
10. Universal lips Whether you need ceiling, wall or floor mounted clips, Flamco has the solution. We offer a wide range of universal mounting clips with a variety of closures, connections and finishes.
More informationREDI-RAIL - Accessories
- ccessories Standard Splice Plate One pair including hardware provided with each straight section. (Expansion splice quantity subtracted) R4-SSP R5-SSP R6-SSP R7-SSP Expansion Splice Plate Bonding jumpers
More informationREDI-RAIL - Accessories
Standard Splice Plates One pair including hardware provided with each straight section. Offset Reducing Splice Plates FLEX-MOUNT djustable Splice Plates 1 /4" hardware. Horizontally adjustable to 90. Vertically
More informationAxial fans. What s more, non-stock models are normally available within two weeks.
Axial fans 7 sees the introduction of a new production line at Xpelair s Peterborough plant for the Scimitar Sickle blade fans in Plate, Short Case and Roof versions up to 63mm. Scimitar will join an impressive
More informationBefestigungssysteme Klimatechnisches Zubehör. Fixing systems
Befestigungssysteme Klimatechnisches Zubehör Fixing systems With us, insulation work becomes enjoyable For almost three decades, we have been a leading enterprise in innovative systems for technical insulation
More informationDesign and Manufacture Data Booklet. National 5, Higher and Advanced Higher
Design and Manufacture Data Booklet National 5, Higher and Advanced Higher This edition: November 2018, version 1.0 Published by the Scottish Qualifications Authority The Optima Building, 58 Robertson
More information14 Miscellaneous tools
14 Miscellaneous tools Bench vice 249 Suction lifter 251 Telescopic 252 mirror Wire guide 252 Puller 254 Multi-tool 257 Riveter 258 Oil filter wrench 260 Electric welder 261 Mortar Glue gun 261 Caulking
More informationProduct Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:
Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page
More informationLindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s
Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the
More informationWORK STATION BRIDGE CRANES
FREE STANDING WORK STATION BRIDGE CRANES CAPACITIES: SPANS: ENCLOSED TRACKS: PRODUCTIVITY: Up to 4000 lbs Up to 30' Steel, Aluminum & Stainless Steel Average 28% Increase A Class Above... In Productivity.
More informationHALFEN FLEXIBLE FRAMING CONNECTIONS MT-FFC 10-E FRAMING SYSTEMS
HAFEN FEXIBE FRAMING CONNECTIONS MT-FFC 10-E FRAMING SYSTEMS Contents HAFEN Flexible Framework Constructions - General overview - Application examples - System 52 - for heavy duty requirements - System
More informationDuct System for Danfoss Air Units
MAKING MODERN LIVING POSSIBLE Installation Guide for Danfoss Air Units www.heating.danfoss.com Danfoss A/S is not liable or bound by warranty if these instructions are not adhered to during installation
More informationRail Fittings. Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws
5 Top Fittings Handrail Fittings Handrails Track Fittings Hinge Fittings Head Screws Connectors Stanchion & End Fittings Elbow Tees Rail Tees Canvas Fasteners Rail Fittings 5 Rail Fittings BIMINI FITTINGS
More informationSpring Steel Fasteners
Conduit Supports 1 Available for 3/8 No tools needed! in. through 2 in. Finger friendly trade sizes for design! EMT, flexible conduit and MC/ AC cable Available with either a plain hole for 1/4 in. bolt
More informationQUICK-LOCK. A complete survey of all Quick-Lock ceiling systems
A complete survey of all Quick-Lock ceiling systems New Products New house style and aging Documentation The Quick-Lock systems and products are now even easier to recognise thanks to the new house style,
More informationSeries 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
More informationRoute/Protect C For service and technical support, call A. System Overview B1. Cable. Ties B2. Cable.
Route/Protect A. Panduit offers a complete line of cable management products and accessories to route and secure cable. These products are an essential part of a clean, professional installation, which
More informationCABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
More informationTEL: Version: KW2
WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to
More informationFlowBar High Capacity Slot Diffuser
October 2016 FlowBar High Capacity Diffuser Model HT (High Throw) Model JT (Jet Throw) Features HT & JT 25mm, 38mm, 51mm, 63mm & 76mm s Ceiling or Sidewall Applications Modular or Continuous s Curved Sections
More informationTHE WORLD S FASTEST DUCTING
NORDFAB DUCTING CATALOGUE Quick-Fit C l i p p e d D u c t i n g THE WORLD S FASTEST DUCTING & FLANGED DUCTWORK Nordfab QF Clipped and FL Flanged ducting QF clipped and FL flanged ducting offers a complete
More information1mm GALVANIZED PIPE SYSTEM
1mm GALVANIZED PIPE SYSTEM Product group 1 A modular pipe system Download catalogue 1mm GALVANIZED PIPE SYSTEM Product group 1 v.en.04/2013 Content Assembly methods... 1-8 Pipes... 9-12 Bends... 13-14
More informationHELM Hardware for Sliding Gates. Sliding hardware
HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700
More information2 YEAR WARRANTY HOSE REELS. reelmaster Series heavy duty, quality hose reel engineered to save space
STANDARD CAPacity 1400 Series 1400 Series heavy duty, quality hose reel engineered to save space 1400 Series* Holds up to 40 of 1/2 Hose For 1/4, and 1/2 I.D. Hose Swivel inlet: 1/2 NPSM Low pressure 1/2
More informationMATERIAL FOR FIBRE OPTIC LINES. General C-bracket HSU trunnion type, forged, for aluminium based OPGW conductors...
153 Contents General.................................................................................................. 154 C-bracket.................................................................................................
More informationDearborn Overhead Crane
A Class Above... In Productivity. In Safety. In Ease of Positioning and Movement. In Ease of Installation. In Designs, Capacities, and Spans. It s no wonder more and more businesses like yours are choosing
More informationInternal Joist Mount: ACC120. extension column. Cathedral Ceiling Adapter: ACC556. Mounts to cathedral or vaulted ceilings 120 (+60 ) of adjustment
Ceiling Plates Ceiling Plate: CMJ470(W), CMJ480(W), CMJ490(W) Internal Joist Mount: ACC120 Round Ceiling Plate: ACC570(S)(W), ACC571 Mounts to wood joists or structural concrete ceiling (requires concrete
More informationVAV terminal units. Type TVM. For dual duct systems PD TVM 1
X X testregistrierung VAV terminal units Type Variant -S Rectangular connection on the room end For dual duct systems VAV dual duct terminal units for dual duct systems with variable volume flows in buildings
More informationCeiling Slot Diffuser DSC
Ceiling Slot Diffuser DSC Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationWIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.
CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable
More informationOrder from MARYLAND METRICS P.O. Box 261 Owings Mills, MD USA web:
Push-In Fittings LF 3000 LF 3200: 3 mm LIQUIfit LF 300 LF 300/ LF 3900 LF 0 PARKER LEGRIS Industrial Connector Systems Products are available from: MARYLAND METRICS P.O. Box 21 Owings Mills, MD 21117 USA
More informationCatalogue walraven.com
Catalogue 2012 walraven.com Table of contents BIS Metal pipe clamps with rubber lining 3-4 BIS Stainless steel pipe clamps 4 starquick Plastic pipe clamps and accessories 5 BIS RapidRail Fixing system
More informationBILMAT ENGINEERING (An ISO 9001:2008 certified company)
BILMAT ENGINEERING (An ISO 9001:2008 certified company) ADDRESS 352,353 G.I.D.C, INDUSTRIAL ESTATE, POR, RAMANGAMDI, VADODARA -391 243, GUJARAT. PROPRIETOR DIPAK L PATEL PHONE NO 0265 6540425 E-MAIL dipak@bilmatengg.com
More informationPipe hanger solutions
Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction
More informationLow Voltage & Communication Fasteners
Eaton offers a wide variety of B-Line series cable management solutions that are ideal for data centers and light-duty commercial, low voltage telecommunication and network cable organization. Com Dangle
More informationTHB - Perforated Ceiling Diffuser. Halton THB. Perforated Ceiling Diffuser
Halton THB Perforated Ceiling Diffuser Horizontal air supply, suitable also for exhaust Installation either directly to ductwork or balancing plenum Detachable front panel enables the cleaning of the diffuser
More informationPIPE & CONDUIT SYSTEMS. Free Call:
PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering
More informationMAJAX-2 GENERAL SPECIFICATION
MAJAX-2 GENERAL SPECIFICATION Majax-2 axial flow fans are manufactured in diameters ranging from 315mm to 2000mm (available in 2250mm on request), and incorporate manually adjustable pitch aluminium bladed
More informationMÜPRO. One-piece pipe clamps. Sprinkler pipe clamps. Refrigerant pipe clamps. Two-piece pipe clamps. Heavy-duty pipe support/din pipe clamps
0. MÜPRO 1. Vibration control 2. Fire protection 3. Pipe clamps 4. Support channels 5. Accessories 6. Anchor points/expansion points 7. Heavy-duty pipe support 8. MPT-Support system 9. Ventilation 10.
More informationCable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
More informationPELICAN Ceiling. Square ceiling air diffuser for supply air and extract air QUICK FACTS
Square ceiling air diffuser for supply air and extract air QUICK FACTS Flexible distribution pattern, yet the acoustic data remains the same One K-factor regardless of distribution pattern Designed for
More informationPipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips
Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets
More informationWedgy Attachment Solutions
Innovation Since 1977 Introduction - Table of Contents Designed and Engineered by Professionals for Professionals Labor Saving Attachment Solutions Wedgy Attachment Solutions STEEL METAL Wedgys work because
More informationROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE
ROOF FAN ROOFMASTER STEC NON-INSULATED VERSION TECHNICAL CATALOGUE Roofmaster STEC non-insulated version - Technical Catalogue 3 CONTENTS GENERAL DESCRIPTION Application/specification...4 Features...4
More informationRound duct diffuser DBB-RR
Round duct diffuser DBB-RR Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationC O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CD SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CD SERIES CD SERIES LINEAR SLOT DIFFUSERS QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman Moducel
More informationPh: Camlok. Lifting Clamps. Made in Britain - Safely used throughout the world.
Ph: 02 9631 8833 camlok@lbwireropes.com.au Camlok Made in Britain - Safely used throughout the world www.camlok.com.au Product Page Vertical Plate Clamps: Why a Camlok: The Advantages Explained 3 92 Series
More informationProduct Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
More informationPIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
More informationFlat-roof system Windsafe
Flat-roof system Windsafe Modular systems optimized for superimposed loads CONTENTS PAGE 1 General information 2 2 Planning 2 3 Article overview 3 4 Mounting of supports 6 5 Exploded view 7 6 Tolerances
More informationDD Series. Duct Regulating Dampers M A N U F A C T U R E R S O F A I R, F I R E A N D S M O K E C O N T R O L P R O D U C T S. Two blade options.
Duct Regulating Dampers Two blade options. DW144 compliant Four case options Three control options Nylon bushes as standard Suitable for vertical and horizontal ducted systems. M A N U F A C T U R E R
More informationINDEX. Chapter1 6. air master. Volume Control Dampers
Chapter1 6 INDEX 1 Volume control damper...:avcd...16.1 Standard sizes...16.2 Fixing details...16.2 How to order...16.2 Performance chart...16.3 2. Circular volume control damper....:avcd-c....16.4 Standard
More informationVentilation Grille PA
Ventilation grille PA Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationTHEATER CURTAIN TRACK SYSTEMS
THEATER CURTAIN TRACK SYSTEMS Theater curtain track systems T 200 KOMBI profile T 300 OMEGA profile Application area: For horizontally moving heavy curtains For backdrops For fly systems For sliding doors
More information