Custom Metal Fabrication - HVAC Air Duct and Fittings
|
|
- Edmund Shields
- 5 years ago
- Views:
Transcription
1 Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel / Fax
2 CUSTOM FITTINGS CUSTOM SHEET METAL FITTINGS We can support you in all your Custom Sheet Metal Fabrication needs, all custom ducts and fittings, Light and heavy gauges from 26 to 10 Gauge to serve your projects needs Please call us at for your custom fittings or it to Curb Adaptors $ 650 Up To 6 Ton Units $ 800 For 7-12 Tons Units Lead Time 3-5 Working Days Acoustically Insulated RTU Curbs $ 199 Up To 6 Ton Units $ 299 For 7-12 Tons Units Lead Time 3-5 Working Days Acoustically Insulated Catalogue - 02
3 CUSTOM FITTINGS CUSTOM SHEET METAL FITTINGS We at our shop are Using the latest available technology in rectangular duct manufacturing i.e. TDC (Transverse Duct Connector System) which is the ultimate & the most economical method of air tight duct connection in industry also makes sure to save time & material drastically with its well seal, strong and durable joint structure. TDF is a flanging system that consists of forming a flange profile on the duct ends, thus made from a sheet from which the duct is fabricated. TDF is a 4-bolt duct connection system that eliminates time wastage. Rather than using separate connectors to assemble your system, TDF flanges are roll formed onto duct during the manufacturing process. We can do at our shop all kind of welded exhaust 16 Gauge grease duct which is a duct that is connected to the Kitchen Exhaust hood and is specifically designed to vent grease, smoke and other harmful contaminants from commercial cooking equipment to the outside of a building. Grease ducts are regulated both in terms of their construction and maintenance, forming part of the building s passive fire protection system. Catalogue
4 VENTILATION FLEX DUCT INSULATED / NON INSULATED INSULATED SLEEVE R4.2 BLACK JA X 10 Ft Insulated sleeve $18.33 JA X 10 Ft Insulated sleeve $21.62 JA X 10 Ft Insulated sleeve $22.53 JA X 10 Ft Insulated sleeve $28.52 JA X 10 Ft Insulated sleeve $ LENGTHS FLEXIBLE ALUM DUCT AS Flex. Alum. Duct Comp. 4 x10 Ft. $7.81 AS Flex. Alum. Duct Comp. 5 x10 Ft. $12.42 AS Flex. Alum. Duct Comp. 6 x10 Ft. $15.05 AS Flex. Alum. Duct Comp. 8 x10 Ft. $18.48 AS Flex. Alum. Duct Comp. 10 x10ft. $ ROLL NON-INSULATED DUCT APS X 25 Ft Non-Insulated Duct $16.34 APS X 25 Ft Non-Insulated Duct $19.25 APS X 25 Ft Non-Insulated Duct $19.96 APS X 25 Ft Non-Insulated Duct $24.63 APS X 25 Ft Non-Insulated Duct $43.96 APS X25 Ft Non-Insulated Duct $52.87 STANDARD FLOOR REGISTERS MODEL DESCRIPTION COLOR RG X 10 Floor Register BULK Brown $5.17 RG X 10 Floor Register BULK White $5.17 RG X 10 Floor Register BULK Brown $4.87 RG X 10 Floor Register BULK White $4.87 Standing S Cleat Features: All Steel Construction Widespread air diffusion Easy to operate damper control Rolled fin for strength and safety Painted registers have a durable powder-coat finish Standing S Cleat 10, 26 GA $ Standing S Cleat 10, 24 GA $14.04 Angle Bar - Galvanized Angle Bar 1.5 x1.5, 16GA, 10 $ ROLLS INSULATED FLEX DUCT MEA X 25 Ft Insulated Duct $39.39 MEA X 25 Ft Insulated Duct $43.33 MEA X 25 Ft Insulated Duct $46.64 MEA X 25 Ft Insulated Duct $59.25 MEA X25 Ft Insulated Duct $77.15 MEA X25 Ft Insulated Duct $90.88 PLASTIC DESIGNER FLOOR REGISTER Features: High-impact polystyrene construction Rust proof and scratch resistant Three position 100% damper shut-off Easy to clean dishwasher safe Knockout at each end for ceiling installation MODEL DESCRIPTION COLOR RG X 10 F-Register BULK B $2.00 RG X 10 F-Register BULK B $2.00 RG X 10 F-Register BULK W $2.00 RG X 10 F-Register BULK W $2.00 Return Air Strip Return Air Strip 1.5 x1/2 x5 $3.31 U Channel - Galvanized U Chanel 1 x2 x1, 16 GA, 10 $17.00 Catalogue - 04 For Custom Duct Order or Parts not founded in our catalogue Please Call
5 VENTILATION GALVANIZED PIPE & FITTINGS GALVANIZED PERIMETER PIPE GV Pipe 5 Ft, 30 Ga $5.85 GV Pipe 5 Ft, 30 Ga $6.55 GV Pipe 5 Ft, 30 Ga $6.88 GV Pipe 5 Ft, 28 Ga $19.28 GV Pipe 5 Ft, 28 Ga $26.38 GV Pipe 5 Ft, 28 Ga $34.45 GALVANIZED 90 ELBOW GV X 90 Adj Elbow 30GA $2.60 GV X 90 Adj Elbow 30GA $2.70 GV X 90 Adj Elbow 30GA $3.54 GALVANIZED 90 ELBOW 26 GAUGE GV X 90 Elbow 26GA $3.94 GV X 90 Elbow 26GA $4.51 GV X 90 Elbow 26GA $6.80 GV X 90 Elbow 26GA $7.52 GV X 90 Elbow 26GA $13.11 GV X 90 Elbow 26GA $19.37 GALVANIZID INCREASER/REDUCER NO Crimp GV to 3, 30 Ga $5.15 GV to 4, 30 Ga $5.15 GV to 5, 30 Ga $6.05 GV to 6, 28 Ga $6.52 GV to 6, 28 Ga $8.80 GV to 7, 28 Ga $9.35 GV to 10, 28 Ga $19.29 GV to 12, 28 Ga $27.02 GALVANIZED PIPE GV x 30 Pipe, 26 Ga $10.46 GV x 30 Pipe, 26 Ga $11.37 GV x 30 Pipe, 26 Ga $12.88 GV x 30 Pipe, 26 Ga $17.37 GV x 30 Pipe, 26 Ga $23.90 GV x 30 Pipe, 26 Ga $27.98 GALVANIZED END BOOT GV0651 End Boot 4 x 10 x 4 $5.37 GV0658 End Boot 4 x 10 x 5 $5.37 GV0667 End Boot 4 x 10 x 6 $5.51 GALVANIZED UNIVERSAL BOOT GV0685 Universal Boot 4 x 10 x 4 $5.14 GV0694 Universal Boot 4 x 10 x 5 $5.51 GV0704 Universal Boot 4 x 10 x 6 $5.66 GALVANIZED TOP TAKE-OFF 30 GAUGE GV0968 Top Take Off 4 $3.94 GV0969 Top Take Off 5 $4.08 GV0970 Top Take Off 6 $4.65 GV0972 Top Take Off 8 $9.55 GALVANIZED TEES GV Tee w/ Collar, 26GA $15.04 GV Tee w/ Collar, 26GA $18.07 GV Tee w/ Collar, 26GA $19.40 GV Tee w/ Collar, 26GA $24.03 Catalogue - 05 For Custom Duct Order or Parts not founded in our catalogue Please Call
6 VENTILATION GALVANIZED PIPE & FITTINGS GALVANIZED DUCT 4 SECTION GV x 8 Rectangular Duct 30GA $21.64 GV x 10 Rectangular Duct 30GA $22.47 GV x 12 Rectangular Duct 30GA $23.31 GV x 14 Rectangular Duct 30GA $24.14 GV x 16 Rectangular Duct 30GA $24.97 GV x 18 Rectangular Duct 28GA $25.81 GV x 20 Rectangular Duct 28GA $26.64 GV x 22 Rectangular Duct 28GA $27.47 GALVANIZED JOIST LINING Joist Lining 16 $4.69 GALVANIZED ANGLE BOOT GV0606 Angle Boot 4 x 10 x 4 $5.44 GV0614 Angle Boot 4 x 10 x 5 $5.65 GV0626 Angle Boot 4 x 10 x 6 $5.68 GV x 24 Rectangular Duct 28GA $28.31 GALVANIZED DRIVE CLEATS & S CLEATS Drive Cleats 30GA 5 Ft. $ Drive Cleats 28GA 5 Ft. $ S Cleats 30GA 5 Ft. $ S Cleats 28GA 5 Ft. $ Drive Cleat 26GA 10 Ft. $ S Cleat 26GA 10 Ft. $6.73 GALVANIZED END CAP GV End Cap 30 Gauge $4.28 GV End Cap 30 Gauge $4.94 GV End Cap 30 Gauge $5.68 GV End Cap 28 Gauge $7.37 GV End Cap 28 Gauge $8.79 GV End Cap 28 Gauge $11.69 GALVANIZED SHEETS x GA Sheet $ x 36 28GA Sheet $ x 48 28GA Sheet $16.40 GV0957 Side Take Off 4 $3.94 GV0958 Side Take Off 5 $4.07 GV0959 Side Take Off 6 $4.65 GV0961 Side Take Off 8 $9.55 GALVANIZED SPIN COLLAR W/DAMPER GV Spin Collar 24 GA $10.78 GV Spin Collar 24 GA $11.09 GV Spin Collar 24 GA $11.62 GV Spin Collar 24 GA $12.58 GV Spin Collar 24 GA $14.28 GALVANIZED DAMPER W/ Key GV Damper 28GA $2.28 GV Damper 28GA $2.51 GV Damper 28GA $2.79 GV Damper 24 GA $5.37 GV Damper 24 GA $7.00 GV Spin Collar 24 GA $19.45 Catalogue - 06
7 FASTENERS SUPPLIES COUPLING NUT ZINC PLATED /8-16X l1-3/4xw5/8, 15/Pack $ /2"-13 x L1-1/4xW11, 15/Pack $11.75 CHANNEL NUT /8-16 Channel Nut $0.41 CEILING FLANGE /8 PLAIN $1.25 THREADED ROD ZINC PLATED /8-16 X 10 FT $ /2-13 X 10 FT $9.34 FLAT WASHER /8 X 1 OD, 50 / Pack $ /2 X 1.37 OD, 25 / Pack $6.68 SPLIT LOCK WASHER /8 Lock Washer, 50 / Pack $3.91 ZINC FINISH MULT-SET DROP IN ANCHOR MODEL DESCRIPTION /8"-16 thre x 1/2" hole, 50 / Pack $23.2 ALUMINIUM RIVET/STEEL /8" Dia, Grip Range, 500 / Pack $26.4 NAIL-IN ANCHOR ¼ X1 ½ Nail, 100 / Pack $28.96 HEX WASHER HD SELF DRILLING SCREW ¼ - 14 X / Pack $ #10-16 X 1/2 100 / Pack $ #10-16 X 5/8 100 / Pack $ #10-16 X 3/4 100 / Pack $ #10-16 X / Pack $5.75 CANTECH SILVER ALUMINIUM FOIL TAPE x45 M Alum F / Tape $ x45 M Alum F / Tape $ TRUBOLT WEDGE ANCHOR /8 X 3-3/4 $ ½ X 4-1/4 $3.25 CUTTING WHEEL A930N x 1/8 x 1 $14.99 HEX NUT / / Pack $3.90 KLINGSPOR GRIND WHEEL T27 A24EX ½ x 1/4 x 7/8 $7.99 KLINGSPOR CUTTING WHEEL T27 A46TZ ½ x 1/16 x 7/8 $5.99 CARBON STEEL PLAIN HANGER BOLT /8-16 x 6 Long $ / / Pack $6.03 Catalogue - 07
8 FASTENERS SUPPLIES DUCT FOIL WRAP - FSK WF0148K F-WRAP R6-1.5 X48 Roll 100 $ WF0348 F-WRAP R x48 Roll 50 $ RIGID FIREGLASS BOARD - FSK BF01083 Fiberglass Brd 1 x24 x48 12 / Box $ BF02083 Fiberglass Brd 2 x 24 x 48 6 / Box $92.66 FIRE WRAP FIREMASTER M Fire Wrap1.5 X2 X 25 Roll 25 $ DUCT SEALANT LEED Qualified Brushes DP 1030 DUCT SEAL 4 Liters, 1 Pail $ White China Flat Sash Brush $ White China Flat Sash Brush $ White China Flat Sash Brush $ 2.99 All PURPOSE LUBRICANT WD oz WD-40 Aerosol $ 9.50 All ROUND STRAPPING Steel, 24 GA, ¾ X 10 $ 7.99 EXPANDING FOAM SPRAY GREAT STUFF FOAM SPRY $ TAPCON HEX HEAD MASONARY FASTNER /4x1-3/4 HWH Tapcon 100 / Pack $27.09 GRADE 5 ZINC FINISH HEX CAP SCREW /8-16X1, 50 / Pack $ /8-16x1-1/4, 50 / Pack $ /8-16x1-1/2, 50 / Pack $ ½ -13x2 10 / Pack $5.95 BEAM CLAMP /8-16 (3/4) $1.95 HANGER STRAP Hanger Strap 18GA, 10 $3.40 GLOVES White String 12 / Pack $ CLEAR SILICONE ROCK RIVER SEALANT oz Sealant $7.95 RED SILICONE HI TEMP SEALANT oz Sealant $15.99 NASHUA DUCT TAPE 300 HEAVY DUTY Heavy Duty 2 / Pack $21.95 EVA ANTI- VIBRATION PAD MP-2E Anti-Vib. Pad, 2in. x 2in.x 7/8in. $2.90 MP-4E Anti-Vib. Pad, 4in. x 4in. x 7/8in. $4.29 ISO-CUBE ECONOMY ANTI-VIBRATION PAD ISO-02 Anti-Vib. Pad, 2in. x 2in. x 3/4in. $2.95 MP-04 Anti-Vib. Pad, 4in. x 4in. x 3/4in. $6.76 Catalogue - 08
9 Unistrut & Accessories UNISTRUT STRUT CHANNEL Slotted 12GA /8 X 1-5/8 X 10 Slotted $ /8 X 1-5/8 X 20 Slotted $ UNISTRUT STRUT CHANNEL Plain 12GA /8 X 1-5/8 X 10 Plain $ /8 X 1-5/8 X 10 Bake to Bake $ UNISTRUT 2-HOLE PARALLEL SPLICE PLATE /8" x 3-1/4 3 / Pack $7.29 UNISTRUT 2-HOLE 90 Angle Fitting Plated Corner Angle - 90 Pack of 10 $14.50 UNISTRUT End Cap For 1 5/8 12 Gauge /8" End Cap $1.14 UNISTRUT Corner 3 holes Plate 3 ½ x 3 ½ holes Corner Pack of 3 $6.70 UNISTRUT Steel Adjustable Angle 2 holes Steel Adjustable Angle $15.85 UNISTRUT Z Shaped Channel Fitting Z Shaped Strut Channel $8.49 UNISTRUT Splice Plate 4 hole /8 x 7 1/4 4 Holes Pack of 4 $8.49 UNISTRUT Trolley Track Hanger 1 5/ Trolley Track Hanger 1 5/8 $25.08 UNISTRUT 1 5/8 Trolleys Trolleys 1 5/8 $20.88 UNISTRUT Flat Gusset Plat 4 Holes x 53/8 4 Holes Corner $4.49 UNISTRUT 4 Holes Steel Corner Plate Holes Corner Plate $18.72 UNISTRUT Tee Plate 4 Holes Holes Tee Plate Pack of 4 $12.88 UNISTRUT U Shape Fitting 5 Holes Holes U Shape Fitting $ 2.74 UNISTRUT Swivel Fitting 3 Holes /8 Swivel Fitting 3 holes $ UNISTRUT Adjustable Angle 4 Holes /8 Adjustable Angle 4 holes $ UNISTRUT Adjustable Angle 2 Holes /8 Adjustable Angle 2 holes $ UNISTRUT Adjustable Angle 2 Holes /8 Adjustable Angle 2 holes $ UNISTRUT Beam Clamp /8 3 3/8 Beam Clamp $ UNISTRUT Z Shaped Channel Fitting /8 x 4 ¼ Z Shape $ Catalogue - 09
10 CUSTOM FITTINGS CUSTOM SHEET METAL FITTINGS We can support you in all your Custom Sheet Metal Fabrication needs, all custom ducts and fittings, Light and heavy gauges from 26 to 10 Gauge to serve your projects needs Please call us at for your custom fittings or it to Catalogue
11 Commercial Ventilation System Exhaust Hoods Fans & Make Up Air Equipments Wall Canopy Exhaust Ventilation Exhaust Fan Centrifugal Up blast Direct Drive Wall Canopy Exhaust Ventilation W/Suppression Exhaust Fan Centrifugal Up blast Belt Drive Wall Canopy Exhaust Ventilation Low Ceiling Wall Canopy Exhaust Ventilation Single Wall Exhaust Fan Centrifugal Up blast Hi Pressure Belt Drive Exhaust Fan Centrifugal Down blast Direct Drive Wall Canopy Exhaust Ventilation Self Cleaning Wall Canopy Exhaust Ventilation W/ Supply Planum Wall Canopy Exhaust Ventilation Island Exhaust Fan Centrifugal Down blast Belt Drive EF Centrifugal Down blast Hi Pressure Belt Drive Exhaust Fan BI - RM Series Belt Drive Utility Blowers MUA Compact Low CFM Direct Gas Fired Heater MUA Compact Direct Electric Heater MUA Direct Gas Fired Heater MUA In-Direct Gas Fired Heater 11 Catalogue - 11
12 Custom Sheet Metal Metal Forming Accessories Hardware Supplies Accessories - Hardware Fasteners Supplies We Make Quality Residential Custom Duct & Fittings Commercial Custom Duct & Fittings Commercial welded Exhaust Duct Fabricate and folding metal Welding Custom and special metal design Roof top Unit Curbs & Curb adaptors Roof top Exhaust Fan Curbs Sloped Roof Curbs Special boxes and Pans Equipment housing, panels & enclosures Air Handler units platforms Free Delivery GTA Free Site Consultation Free Shop Drawings Free Replacement Free Drawings for duplicate Parts 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel / Fax
Custom Metal Fabrication - HVAC Air Duct and Fittings
Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
More informationCustom Sheet Metal Air Duct & Fittings Accessories Hardware & Fasteners HVAC Duct Systems & Custom Fittings
Custom Sheet Metal Air Duct & Fittings Accessories Hardware & Fasteners HVAC Duct Systems & Custom Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
More informationINSTALLATION INSTRUCTIONS WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING -
More informationINSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationPRODUCT INDEX PRODUCT INDEX. Item Page Item Page Item Page
PRODUCT CATALOG PRODUCT INDEX Item Page Item Page Item Page PRODUCT INDEX 001 Flat 45 Duct Angle 11 002 Flat 90 Duct Elbow 11 003 Vertical 45 Duct Angle 11 004 Vertical 90 Duct Elbow 11 005 Duct End Cap
More informationINSTALLATION INSTRUCTIONS CWSH3 WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS CWSH3 WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS CWEH6-K WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationXeteX, Inc. All Rights Reserved.
Model XC Indoor or outdoor mounted, simple, in-case aluminum flat plate exchanger with options for frost control. Ideal for inline installations: in duct-work systems, in built-up units, or in modular
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO WALL MOUNT HOOD
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO
More informationINSTALLATION INSTRUCTIONS CWUH9 WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS CWUH9 WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS AH12 WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS AH12 WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS ZTH WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS ZTH WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS K SERIES LINER INSERT
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS K SERIES LINER INSERT Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO WALL MOUNT HOOD
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO
More informationINSTALLATION INSTRUCTIONS JDH/C2 DESIGNER SERIES WALL MOUNT HOOD
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS JDH/C2 DESIGNER SERIES
More informationINSTALLATION INSTRUCTIONS WALL MOUNT RANGE HOOD WITH M600 OR M1200 BLOWER
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS WALL MOUNT RANGE HOOD
More informationINSTALLATION INSTRUCTIONS JCH/C2 DESIGNER SERIES WALL MOUNT HOOD
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS JCH/C2 DESIGNER SERIES
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO ISLAND RANGE HOOD
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO
More informationM I S C E L L A N E O U S
M I S C E L L A N E O U S www.alggin.com CALGARY EDMONTON LETHBRIDGE 4540-46th Ave. SE 12110-154 St. NW 1126-36 St. N (403) 252-0132 (780) 424-0132 (403) 320-8732 sales@alggin.com edmsales@alggin.com sales@alggin.com
More informationINSTALLATION INSTRUCTIONS ISLAND RANGE HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS ISLAND RANGE HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS WALL MOUNT RANGE HOOD WITH M600 OR M1200 BLOWER
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL DUCTWORK C U L R Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS WALL MOUNT RANGE HOOD
More informationINSTALLATION INSTRUCTIONS ISLAND RANGE HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS ISLAND RANGE HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO WALL MOUNT HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO WALL MOUNT HOOD Read All Instructions Thoroughly Before Beginning Installation
More informationWALL MOUNTING KIT ASSEMBLY INSTRUCTIONS MODELS: TXBW & TXDW
Wall Opening Wall Mounting Adaptor (Optional) Support Strap E WALL MOUNTING KIT ASSEMBLY INSTRUTIONS MODELS: TXBW & TXDW The centrifugal power roof ventilators model TXB (belt drive) and TXD (direct drive)
More informationargco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range
More informationINSTALLATION INSTRUCTIONS K-SERIES UNDER CABINET HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS K-SERIES UNDER CABINET HOOD Read All Instructions Thoroughly Before Beginning Installation
More informationConnection Diagrams (36" - 48" Widths) Wall Side 1 ¾. Electrical. Connection Diagram (48" - 60" Widths)
R DESIGNER SERIES WALL MOUNT RANGE HOOD JDH/C2 Series Equipped with LED lighting. Not available with heat lamps. Optional duct covers available in standard and custom sizes. Recommended Mounting Height
More informationConnection Diagrams (36" - 48" Widths) Wall Side 1 ¾. Connection Diagram (48" - 60" Widths) (Front View) Connection Diagram (54" - 66" Widths)
R DESIGNER SERIES WALL MOUNT RANGE HOOD JPH/C2 Series Equipped with LED lighting. Not available with heat lamps. Optional duct covers available in standard and custom sizes. Recommended Mounting Height
More informationViking Installation Guide
Viking Installation Guide Professional Series Built-In Chimney-Style Hoods Viking Range Corporation 111 Front Street Greenwood, MIssissippi 38930 USA NOTE: IF INSTALLING HOOD WITH WARMING SHELF PANEL,
More informationAL-Maraj Central A/C Systems Accessories Mfg Co.
AL-Maraj is one of the renowned Manufacturer, Stockist and Supplier of all kinds of HVAC products, Ducting accessories, Pipe support system, Electro-mechanical and A/C Accessories in U.A.E since 2000.
More informationceiling & inline/cabinet ventilators
Air Moving Solutions. ceiling & inline/cabinet ventilators T-Series ( T TL ) CATALOG 4600 March 2012 Ceiling&InlineVentilators T-Series T TL Twin City Fan & Blower s T Series Ceiling and TL Series Inline/Cabinet
More information2520- EC Motor Speed Controller
2520- EC Motor Speed Controller T1 AC Line Voltage From Contactor T2 or Neutral 760-ECM ECM Motor BLACK ORANGE BLACK RED (+) Signal 24VAC (-) GND Features Motor Types: ECM (dc brushless) Motors Motor Speed:
More informationWALL MOUNTING KIT ASSEMBLY INSTRUCTIONS MODELS: TXBW & TXDW
Wall Opening Wall Mounting Adaptor (Optional) Support Strap E WALL MOUNTING KIT ASSEMBLY INSTRUTIONS MODELS: TXBW & TXDW The centrifugal power roof ventilators model TXB (belt drive) and TXD (direct drive)
More informationIMPERIAL REGISTERS AND GRILLES
Revised: July 205 Replaces: August 204 INDEX DIFFUSERS BASEBOARD WHITE... 8-0 GRILLES BASEBOARD RETURN AIR... 8-8 8-9 PROJECTION 2" PROJECTION WHITE... 8-0 SIDEWALL 3/6" PROJECTION PAINTED STEEL WHITE...
More informationPro Island Ventilation Hoods
INSTALLATION GUIDE Pro Island Ventilation Hoods READ AND SAVE THESE INSTRUCTIONS Contents Wolf Pro Island Ventilation Hoods................. 3 Safety Instructions............................ 4 Installation
More informationCEILING & INLINE/CABINET VENTILATORS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 MARCH 2018 CEILING & INLINE VENTILATORS OVERVIEW T I TL T-Series
More informationIllustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-561C (Gandy Part #6245DS-GP) For Great Plains Turbo-Max 2400, 3000, 3500 & 4000 Models 45
More informationNEW PRODUCTS HRANEC SHEET METAL INTRODUCES. FOR 2015! Call for. Pricing S P I R A L & O V A L M A N
HRANEC 724-437-2211 SHEET METAL INTRODUCES 2 NEW PRODUCTS Roof Ports systems are stocked for same day shipping, see page 4. FOR 2015! Call for Pricing O V A L M A N 724-437-2211 Made to order single wall
More informationINSTALLATION INSTRUCTIONS ISLAND LINER INSERT
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS ISLAND LINER INSERT Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationTURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series
TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 March 2018 CEILING & INLINE VENTILATORS Overview T I TL Twin City Fan & Blower s T-Series Ceiling and TL-Series
More informationGlobal Finishing Solutions Table of Contents
Global Finishing Solutions Table of Contents Spray Booths-Accessories ProClean - Open Face Filter Booths... 2 ProClean Extensions... 3 Redi-Pak TM - Bench Booths... 4 Ultra and Concept Paint Mix Rooms...
More informationINSTALLATION INSTRUCTIONS UNDER CABINET HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS UNDER CABINET HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationThirteen (13) UL listed fluorescent fixtures per booth will supply illumination.
Quoted as per your request: two (2) Non-Pressurized, Drive-Thru, Full Down Draft, Paint Booth model: TDD-16-16-20-DT with interior working dimensions of 16-0 wide X 16-0 tall X 20-0 long. Overall dimensions
More informationZEPHYR CABINET. Single & Twin Unit Cabinet Fans. Moving Your Way BULLETIN ZC15 TABLE OF CONTENTS
ZEPHYR CABINET Single & Twin Unit Cabinet Fans Moving Your Way TABLE OF CONTENTS Introduction, Certifications & Listings, Features & Benefits 3 Options & Accessories 4 Typical Applications & Belt Drive
More informationControl Dampers and Fire Dampers. Volume 1 - March Insulated Control Dampers. Non-Insulated Control Dampers. Framing. Accessories.
Insulated Control Dampers 2 Volume 1 - March 2010 6 Non-Insulated Control Dampers 8 Framing Accessories 9 Jack Shaft Steel Control Dampers Fire Dampers 10 11 Control Dampers and Fire Dampers 3900 Insulated
More informationINSTALLATION INSTRUCTIONS
TT-1079 9/95 INSTALLATION INSTRUCTIONS Original Issue Date: 9/95 Model: 20-60 kw (Detroit Diesel Powered) Market: Industrial Subject: Sound Shield Enclosure Kits PA-324742-SD, 324742-SD, PA-324743-SD,
More informationWhen Time Matters! listed Fire Damper
listed Fire Damper The FAST fire damper is offered as an option for containing fire and smoke under the hood in the event of a fire from a cooking appliance. Construction : The fire damper is assembled
More informationINSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO ISLAND RANGE HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS EUROLINE/EUROLINE PRO ISLAND RANGE HOOD Read All Instructions Thoroughly Before Beginning
More informationTable of Contents WARRANTY...3 APPLICATION...4 MECHANICAL...5 Joint Sealant...5 Grease Duct Standard Connection...6 Collar and Adjustable Duct
Non-Welded Grease Duct Systems Installation, Operation, and Maintenance Manual FOR YOUR SAFETY TWO MAJOR CAUSES OF GREASE DUCT RELATED FIRES: () FAILURE TO MAINTAIN REQUIRED CLEARANCE (AIR SPACE) TO COMBUSTIBLE
More informationIllustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060
Illustrated Parts & Packing List & Instructions 815 Rice Lake Street, Owatonna, MN 55060 Great Plains Part #891-622C (Gandy Part #6245DS-TT) Great Plains Turbo-Till & Turbo-Chopper 2400/3000 Models 45
More informationMODEL FF50 CEILING FAN
MODEL FF50 CEILING FAN SPECIFICATION SHEET Simple installation dependability make this odor moisture removing fan a real value. Matte white polymeric blends well with any decor Torsion spring grill mounting
More informationInstallation Instructions
Installation Instructions Speedcook Oven Read carefully. Keep these Instructions. INSTALLATION INSTRUCTIONS Electrical Requirements Product rating is 240/208 volts AC, 60 Hertz, 30 amps and 6.5 kilowatts.
More informationTG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices
TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,
More informationP RO W ALL V ENTILATION H OODS INSTALLATION INSTRUCTIONS
P RO W ALL V ENTILATION H OODS INSTALLATION INSTRUCTIONS CONTACT INFORMATION Wolf Customer Service: 800-332-9513 Website: wolfappliance.com As you follow these instructions, you will notice WARNING and
More informationINSTALLATION INSTRUCTIONS UNDER CABINET HOOD
Read and Save These Instructions All Hoods Must Be Installed By A Qualified Installer INSTALLATION INSTRUCTIONS UNDER CABINET HOOD Read All Instructions Thoroughly Before Beginning Installation WARNING
More informationAir Moving Solutions. low pressure mixed flow fans. QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat)
Air Moving Solutions. low pressure mixed flow fans QCLB QCLBR (Restaurant) QCLBSH (Smoke & Heat) BULLETIN 1070 February 2012 MixedFlowFans Models QCLB QCLBR QCLBSH Benefits of Mixed Flow Fans Twin City
More informationCentrifugal Cabinet Fans Model BCF. Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile November 204 BCF Centrifugal Cabinet Contents Standard Construction Features... 3 Options and Accessories... 4 Filter and Mixing Box Data... 5 Typical Installations...
More informationORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.
Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and
More informationINSULATED CANTED ROOF CURB NON-PROPELLER PRODUCTS
INSULATED ANTED ROOF URB NON-PROPELLER PRODUTS Wood Nailer A 3" 3/4" 3" 1" Semi-Rigid Insulation Damper Shelf (Optional) (1) B OPTIONS: 1. Damper Shelf. 2. Metal Liner - solid or screen type. 3. Burglar
More informationTURNING AIR INTO SOLUTIONS. LOW PROFILE UPBLAST PROPELLER ROOF VENTILATORS. LUD/LUB (Standard) LUBMO (Motor Out of Airstream) LUBSH (UL Smoke & Heat)
TURNING AIR INTO SOLUTIONS. LOW PROFILE UPBLAST ROOF VENTILATORS LUD/LUB (Standard) LUBMO (Motor Out of Airstream) LUBSH (UL Smoke & Heat) CATALOG 4870 April 17 ROOF VENTILATORS Overview Propeller Roof
More informationINSULATED CANTED ROOF CURB NON-PROPELLER PRODUCTS
INSULATED ANTED ROOF URB NON-PROPELLER PRODUTS Wood Nailer A OPTIONS: 1. Damper Shelf. 2. Metal Liner - solid or screen type. 3. Burglar bars - 1/2" dia. on 6" centers. 4. Finishes - baked or air-dried
More informationModel ND-2 Specification
Model ND-2 Specification The model ND-2 is an exhaust only canopy hood rated for all types of cooking equipment. The hood shall have the size, shape and performance specified on drawings. Construction
More informationRECTANGULAR, 2-HOUR FIRE RATED, ZERO-CLEARANCE GREASE DUCT CO.
RECTANGULAR, 2-HOUR FIRE RATED, ZERO-CLEARANCE GREASE DUCT CO. For over 75 years, Van-Packer has supplied venting products to the Commercial and Industrial heating and process markets. For the past 30
More informationManufacturing Facilities. Sheet Metal Connectors, Inc. is proud to be a member or affiliated with the following associations;
Corporate Headquarters SHEET METAL CONNECTORS, INC. 5850 MAIN STREET N.E. MINNEAPOLIS, MINNESOTA 55432 Toll Free: 800-328-1966 Local: 763-572-0000 Fax: 763-572-1100 www.smcduct.com Manufacturing Facilities
More informationManufacturing. Delivering. Growing Catalog. Iris Ave Jefferson, Louisiana (504) (504)
Celebrating 0 Years Manufacturing Delivering Growing 5 Catalog Iris Ave Jefferson, Louisiana 02 (50) 35- (50) 35-5 Conductor Elbows... 9 Conductor Pipe... Dampers/ Damper Hardware... -9 Diffusers... Duct
More informationResidential and Light Commercial Products. May Page 1
Residential and Light Commercial Products May 2007 Page 1 MIDWEST DUCTS May 2007 TABLE OF CONTENTS ALUMINUM PRODUCTS Page 18 ANGLES (ROUND) Page 7 ANGLES (SQUARE) Page 5 BASEMENT HEADS Page 13 BOOTS Page
More informationInternal Joist Mount: ACC120. extension column. Cathedral Ceiling Adapter: ACC556. Mounts to cathedral or vaulted ceilings 120 (+60 ) of adjustment
Ceiling Plates Ceiling Plate: CMJ470(W), CMJ480(W), CMJ490(W) Internal Joist Mount: ACC120 Round Ceiling Plate: ACC570(S)(W), ACC571 Mounts to wood joists or structural concrete ceiling (requires concrete
More informationA I R H A N D L E R S CB26UH-R. MERIT Series R-22 - Upflow / Horizontal P R O D U C T S P E C I F I C AT I O N S
P R O D U C T S P E C I F I C AT I O N S A I R H A N D L E R S CB6UH-R MERIT Series R- - Upflow / Horizontal Bulletin No. 1067 April 01 Supersedes January 01 Nominal Capacity - 1.5 to 5 Tons Optional Electric
More informationFUEL STORAGE TRAILER ACCESSORIES
Ignition Oil/Gas Mixing Bottle 722-8303 $3.95-J Helps with accurate mixing of oil/gas in the proper ratios. Imperial and Metric measurements on the bottle. Great for all 2-Cycle engines! FUEL STORAGE TRAILER
More informationPERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969 CHEVROLET CAMARO/ FIREBIRD NOTE: INSTRUCTIONS DEPICT CAMARO
specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT SERIES IN-DASH HEAT/ COOL/ DEFROST 1969 CHEVROLET CAMARO/ FIREBIRD NOTE: INSTRUCTIONS DEPICT CAMARO CONTROL & OPERATING
More informationSECTION DUCTWORK ACCESSORIES
SECTION 15910 DUCTWORK ACCESSORIES PART 1- GENERAL SCOPE This sections includes accessories used in the installation of duct systems. Included are the following topics: PART 1- GENERAL Related Work Reference
More informationThe Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED PROPELLER ROOF VENTILATORS. Models BSHD / BSHB
The Industrial Choice. Model BSHD Direct Drive LOW PROFILE HOODED ROOF VENTILATORS Models BSHD / BSHB CATALOG 632 November 12 Hooded Roof Ventilators Models BSHD BSHB Aerovent Low Profile Hooded Roof Ventilators
More informationTons BTU/h S.E.E.R* E.E.R** HSPF
SOUND REFRIGERANT ENVIRONMENTALLY PHD3 Product Specifications 13 SEER, R -410A PACKAGE HEAT PUMP, 2½ to 5 TONS 3 -Phase, 208/230-3 -60 and 460-3 -60 REFRIGERATION CIRCUIT R--410A refrigerant Copper tube/aluminum
More informationAFA TS GmbH - Werner von Siemens Str.3 - D Grafenberg Copyright 2009 Tel.: +49(0) Fax: +49(0)
AFA TS GmbH - Werner von Siemens Str.3 - D-72661 Grafenberg Copyright 2009 Tel.: +49(0)7123-97382-0 - Fax: +49(0)7123-97382-90 - E-Mail: mail@afa-ts.de Page 1-15 www.afa-ts.com Exhaust Extraction Systems
More informationGRAVITY VENTILATORS SIZING
GRAVITY VENTILATORS SIZING RCXII (sizes 6-20) RCXII (sizes 24-36) RCXII-SF BGH RLX Sizing The tables shown offer quick selections at common static pressure points. Selection choices vary widely due to
More informationComplete HVAC Capability
Air Handling Units Brochure 1110 January 2006 Complete HVAC Capability MEA Horizontal Draw-Thru to Size 65 Vertical Draw-Thru to Size 50 1000 to 60,000 CFM Forward Curved or Airfoil Wheels Inlet Vane Option
More informationThe Premium Quality Fan Coil Units for Horizontal Application Hydronic or Electric Heat
Producing Quality Heating & Cooling Equipment For Over 50 Years CEA SERIES CEILING EPOSED HORIZONTAL FAN COIL UNITS The Premium Quality Fan Coil Units for Horizontal Application Hydronic or Electric Heat
More informationProduct & Description Order Code Dimensions (mm)
1RD 100 X 350MM Ø100 L 350 1RD 100 X 1M Ø100 L 1000 Rigid Ducting PVC 1RD 100 X 2M Ø100 L 2000 1.0 2.8 6.2 1RD 100 X 3M Ø100 L 3000 1RD 125 X 350MM Ø125 L 350 1RD 125 X 2M Ø125 L 2000 0.4 1.4 3.8 1RD 150
More informationKWF Water Wash Canopy with Supply Air
KWF Water Wash Canopy with Supply Air SCHLIEREN THERMAL IMAGING SYSTEM Photographer: Matti Lehto The KWF is a highly effective kitchen ventilation canopy for the removal of contaminated air and excess
More informationP8SE Series. 14 SEER, Single Phase Packaged Air Conditioner TECHNICAL SPECIFICATIONS. FEATURES and BENEFITS. 3, 4, 5 Ton Units
TECHNICAL SPECIFICATIONS P8SE Series 14 SEER, Single Phase Packaged Air Conditioner 3, 4, 5 Ton Units The P8 Series single packaged air conditioners are high efficiency self contained cooling units that
More informationInstallation, Operation and Maintenance Manual
Commercial Kitchen Hood Installation, Operation and Maintenance Manual www.fastkitchenhood.com General Information Prior to installing the stainless steel ventilation hood, the installing contractor should
More informationAutomatic Roof Door Vents
DATA SHEET Automatic Roof Door Vents Features n UL Listed for use as an automatic smoke vent n FM Approved as an automatic door vent for use in high expansion foam systems n Available in multiple sizes
More informationKVR Capture Jet. KVR- Capture Jet Round Island Hood with Perimeter Jets. Round Island Hood with Perimeter Jets
KVR Capture Jet Round Island Hood with Perimeter Jets The KVR Round Island Capture Jet hood with perimeter jets is a highly efficient kitchen ventilation hood that removes contaminated air and excess heat
More informationFire Dampers Catalogue
Fire s Catalogue DUCT VENTILATION AIR CONDITIONING Co. (W.L.L.) CRFD - Type A, B, CR & CO Rectangular, Round & Flat Oval UL 555 Classified 2013 For Use in Static & Dynamic Systems 3 Hour Rating Made in
More informationCharcoal Filter Installation NOTE: The charcoal filters are preinstalled if you purchased the range hood with re-circulating kit from us. 1. Remove st
Venting Methods This range hood is factory set for venting through the roof or wall. For non-vented (re-circulating) installations, see Ductless Conversion on Page 7. Vent work can terminate either through
More informationInline and Roof Mounted Fans
CV Inline and Roof Mounted Fans Page Introduction........................................... 2 Construction Features................................. 3-4 Specifications and Dimension Data CVD (Direct Drive
More informationFAN POWERED TERMINAL UNITS
Benefits: Fan powered terminals are typically used for heating and cooling of perimeter zones. Operating cost savings can be achieved through the use of waste heat recovery from the ceiling plenum and
More informationGeneral Front Windshield
General Front Windshield **WATCH OUR INSTALL VIDEO ALONG WITH INSTALL SHEET. 8-5/16-18x1 Black Carriage Bolts 8-5/16 Black Nylock Nuts 2-5/16x1-1/4 Stainless Steel Socket Head Screws 2-Rubber Grommets
More informationSheet Metal Connectors, Inc Main Street N.E. Minneapolis, Minnesota
Sheet Metal Connectors, Inc. 5850 Main Street N.E. Minneapolis, Minnesota 55432-5439 Sheet Metal Connectors, Inc. www.smcduct.com SPECIFICATIONS FOR SPIRAL PIPE AND FITTINGS MINNEAPOLIS, MN 5850 Main Street
More informationPropeller Fan BE Series
Propeller Fan BE Series ENCLOSED BELT DRIVEN WALL EXHAUST FAN THESE LOW PRESSURE BELT DRIVEN FANS ARE IDEALLY SUITED FOR VENTILATION OF UNDERGROUND GARAGES OF APARTMENT BUILDINGS, WAREHOUSES, PUBLIC BUILDINGS,
More informationIllustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 66GW27F Orbit-Air Applicator 120 Cu. Ft. Hopper w/ 27 (2 ) Openings, Fertilizer
More informationRoof Upblast and Sidewall Exhaust
XRUB, XRUD, XSEB, XSED, and XRUBS models are listed for electrical (UL/C-UL US 0) File no. E000 and for grease removal (UL/C-UL US ) File no. MH. Accurex, LLC certifies model XRUB, XRUD, XSEB, XSED, and
More informationMixed-Flow Blowers Page Specifications and Dimension Data Performance Data Sound Data
Mixed-Flow Blowers Page Introduction.......................................... 2-4 Standard Construction Features.......................... 5-7 Mixed-Flow Advantages.................................. 8
More informationInstallation Instructions
CAHZCOIL8A00 CAHZCOIL412A00 CAHZCOIL208A00 CAHZCOIL212A00 CAVTCOIL8A00 CAVTCOIL412A00 CAVTCOIL208A00 CAVTCOIL212A00 Installation Instructions DIRECT --- EXPANSION HORIZONTAL AND VERTICAL EVAPORATOR COILS
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationDCG Series. Submittal Data Form. 7½ - 12½ Ton Packaged Gas/ Electric Up to 11.3 EER / 80% AFUE
Submittal Data Form Job Name DCG Series 7½ - 12½ Ton Packaged Gas/ Electric Up to 11.3 EER / 80% AFUE Cooling Capacity: 88,000 144,000 BTU/h Heating Capacity (Output): 168,000 BTU/h Purchaser Order No.
More informationRECEIVING AND INSPECTION
Non-Welded Grease Duct Systems Installation, Operation, and Maintenance Manual FOR YOUR SAFETY TWO MAJOR CAUSES OF GREASE DUCT RELATED FIRES: (1) FAILURE TO MAINTAIN REQUIRED CLEARANCE (AIR SPACE) TO COMBUSTIBLE
More informationATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT Metal Industries, Inc.
ATU PRODUCT CATALOG AIR TERMINAL UNITS FCI-600 CONSTANT VOLUME FAN TERMINAL UNIT 15 Metal Industries, Inc. BENEFITS: Fan powered terminals are typically used for heating and cooling of perimeter zones.
More information& 76 CHEVROLET NOVA HEATER ONLY
specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic hi l PERFECT FIT IN-DASH HEAT/ COOL/ DEFROST 1969-74 & 76 CHEVROLET NOVA HEATER ONLY CONTROL & OPERATING INSTRUCTIONS The controls on
More informationPT. COMFORT AIRE ANEKA TEKNIK
PT. COMFORT AIRE ANEKA TEKNIK JL. RAYA CEMPAKA PUTIH NO. 3 BINTARO, KEBAYORAN-LAMA JAKARTA 12330 TELP. (021) 7402068; 7491264/5 FAX. (021) 7355296 About Comfort Aire is a metal working company with 20
More information