Ancillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel.

Size: px
Start display at page:

Download "Ancillary Equipment FIG. 222 FIG. 283 FIG /10 ADJUSTABLE PIPE SUPPORT U BOLT (NON GRIPPED) U BOLT (GRIPPED) Material - Carbon Steel."

Transcription

1 78 FIG. 222 FIG. 283 FIG. 1 04/ U BOLT (GRIPPED) Nom A C D T L Load Complete with 2 nuts Full nuts and 2 Locknuts. Nominal U BOLT (NON GRIPPED) Nom A C D T L Load Complete with 4 nuts Nomonal ADJUSTABLE PIPE SUPPORT Nom A-NB B C D Min Nominal Distance from floor to centre of L L E PCD H Load M M M NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB NB

2 04/ 79 FIG. 67 FIG. 173 FIG. 1 PIPE ROLL Nom Rod B C D L E Roll Dia No. Load M M A M M M M M M M M M M M M M M M M M M M M M M Material - Cast Iron. To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal CAST IRON PIPE ROLL Nom B C D L Rod Dia E Load M M M M M M M M M M M M M M M M M M M Material - Cast Iron. To select correct size of roll for use with covered piping and pipe covering protection saddles. see Fig. 186 etc. Nominal pipe size 300 to Bushed Ends. (Phosphor Bronze) Nominal ROLLER SUPPORT Nom Material - Carbon Steel Spindle and cast iron roll. Fig To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal A B C D H Load M M M M M M M M M M M M M M M M

3 80 FIG. 54 FIG. 142 FIG. 9 ROLLER CHAIR TWO ROD ROLL TYPE HANGER Nom A B C D E Load M M M M M M M M M M M M M M M M M M ADJUSTABLE ROLL SUPPORT Nom A B C D E Steel F Load Bolt M 38 30x6 136 M M x6 272 M M x6 272 M M x6 272 M M x 315 M M x 455 M M x 455 M M x 590 M M x M M x12 43 M20 Nom A C D E Load M M M M M M M M M M M M M / Material - Carbon Steel Frame and Sprindle and cast iron roll. Fig To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal Material - Cast Iron roll. Fig Carbon Steel Spindle and end block. To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal Material - Carbon Steel and cast iron roll. Fig To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal

4 04/ 81 FIG. 478 FIG. 112 CUSHION SPRING ASSEMBLY Spring No Spring Defl /mm Load 32 Def (2Sp) Dia Cup E Spring Height H Rod Dia M M M24 ROLLER SUPPORT Nom A B C D E H Load. Roll M M M M M M M M Material - Spring Steel and carbon steel. Total Deflection for all springs - 38mm Tabulated maximum load per hanger (two springs) listed at recommended maximum deflection of 32mm. Figure 142 Roll Hanger (dotted) ordered separately. Spring No. Drop Rods Material - Carbon steel spindle and cast iron roll. Fig 67. To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig 186, etc. Nominal

5 82 FIG. 39 STEEL CHAIR AND ROLLER Nom A B C E F G T Load. 1A A A A Material - Carbon Steel and cast iron roll. Fig. 67. To select correct size of roll for use with insulated piping and pipe covering protection saddles, see Fig. 186 etc. Nominal pipe size 04/ FIG. 40 ADJUSTABLE STEEL CHAIR AND ROLL No Nom Dim A B C D E F G H Min Load. 1A M A M A M A M M M M M M M M M M M M M M M M M Material - Carbon steel or equivalent and cast iron roll. Fig. 67. To select correct size of roll for use with insulated piping and pipe covering protection saddles, see Fig. 186 etc. Nominal

6 04/ 83 FIG. 127 (SIZES 20-90) FIG. 127 (SIZES 0-600) FIG. 140 ANCHOR CHAIR Nom A B C D E L Load M M M M M M M M Nominal ANCHOR CHAIR Nom A B C D E F L Load M M M M M M M M M M M Nominal ROLL HANGER Nom A B C D E Steel F Material - Carbon Steel and cast iron roll. Fig To select correct size of roll for use with covered piping and pipe covering protection saddles, see Fig. 186 etc. Nominal Load M M 30x M M 30x M M 30x M M 30x M12 M12 40x M12 M12 40x M12 M12 40x M16 M16 50x M20 M16 50x M20 M20 50x M20 M20 50x M20 M24 50x M24 M24 50x M24 M24 65x M24 M24 80x15 635

7 84 04/ FIGS Nom Load / Thick Cover Nominal Fig No Roll Saddle Fig 67 Fig 67 Fig 173 Roll A B Fig 173 A B A A A A Covering Protection Saddles Nom Load Thick Cover Fig No Roll Saddle Fig 67 Fig 67 Fig 173 Roll A B Fig 173 A B Note: Centre Rib C is fitted to saddles for Nom sizes 150 to 600. Nom Load Thick Cover Length L - Fig No Roll Saddle Fig 67 Standard Lengths Up to 65 NB long 80 NB to 600 NB long Fig 67 Fig 173 Roll A B Fig 173 A B

8 04/ 85 FIG. 145 PIPE CHAIR Nom A B C D E F H Cut From U/B Nominal Load x2x x2x x2x x2x x2x x140x x140x FIG. 375 BASE ANCHOR Nom Material - Carbon Steel B C H Plt. Thick Nominal Height L For Horizontal or for Long or Short Radius Welding Elbows Vertical Load L T1 T2 FIG. 379H and FIG. 379E FIG. 380H and FIG. 379E RIGID BASE SUPPORT/SLIDING BASE SUPPORT Nom L C D E F G Holes H T S Nom Tube Vertical Load Material - Carbon Steel FIG. 379 FIG. 380 Nominal Height L For FIG Horizontal 379H/380H for Horizontal for Long or Short Radius Welding Elbows FIG 379E/380E for Long or Short Radius Welding Elbows

9 92 FIG. 84 MEDIUM WELDED STEEL BRACKET A B C D E F G H J L imum Load FIG. 139 HEAVY WELDED STEEL BRACKET A B C D E F G H J K L imum Load FIG. 150 STEEL BRACKET A B C D G H Flat E x x x x x15 imum Load FIG. 159 STEEL BRACKET A B C D H Angle F Plate E Load x50x x50x x50x x60x x80x 850 Distance from wall to centre of pipe (Dim. X) Hole J 04/

10 96 FIG. 400 WELDED TRAPEZE BEAM FABRICATION Beam s Rod Tie Plates Hole H2 Channel B C Gap F 1 76x38 M x50 M x65 M x75 M x75 M x75 M x0 M x0 M Chan. imum Load () Rod Centres A-A (mm) x x x x x x x x Rod ØD M M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80 M90 Hole ØH HOLE Load Holeper ØHRod 1 Ø() A CHAMFER Hole ØH 1 E Load per Rod () Centres Hanger Rod Diameter 04/

11 04/ 97 FIG. 401 TRAPEZE BEAM Beam s End Plate UC/SHS/HEB UC/RSJ W B 1 80X80X6.3 SHS X2X X0X20.4 HEB RSJ X114X X120X26.7 HEB RSJ X152X30 UC X203X46 UC X203X71 UC X305X97 UC X368X153 UC Beam Rod ØD M M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80 M90 Hole ØH Rad R THK T Load Per Rod (kg) Centres Hanger Rod Diameter imum Load () Rod Centres A-A (mm) x x2 0X x X x x x x x

12 98 FIG. 81 FIG. 79 FIG. 85 EXTENSION HANGER RING Nom B Load D Rod Dia M M M M M M M M M M12 EXTENSION HANGER Nom A B C Load D Rod Dia M M M M M M M M M M12 SINGLE PLATE No. A B T C E Csk G D Thrd Load M M A M M / Material - Malleable Iron. Nominal Tapping D Finish (Black or Galvanised) Larger sizes available on request. Material: Ring & Plate - Malleable Iron. : Drop rod - Carbon Steel Nominal Tapping D Finish (Black or Galvanised) Larger sizes available on request. Material - Malleable Iron. Nominal Tapping D Finish (Black or Galvanised)

13 04/ 99 FIG. 165 FIG. 3 STEEL HEXAGON NUT Fig. 165 D M6 M8 M M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 A B C STEEL ROUND WASHER Fig. 3 E F FIG. 399 SPRING HANGER Spring No. B Defl mm Spr. Def. Load /mm A Min C D 1 M M M M M M M M M M M M Material - Carbon Steel: When ordering specify. Spring No. See Section 3 of this Catalogue for full range of Variable Spring Hangers FIG. 2A STEEL SQUARE PLATE Allows Angulation of Sling Rod B Sq Material - Carbon Steel When ordering specify. Rod Dia D C D MAX F M M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 M80 M H J K Load

14 0 FIG. 337A Elbow Hanger (SRWE) D Rod M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 Load kg T W R H Nom B A Elbow Rod Dia. FIG. 337B Elbow Hanger (LRWE) D Rod M12 M16 M20 M24 M30 M36 M42 M48 M56 M64 M72 Load kg T W R H Nom B A / Elbow Rod Dia.

ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb.

ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and C-to-C dimension. C - C LOAD lb. Fig. 2110 www.pipingtech.com/fig2110 Sway Strut with 4 of Adjustment Engineered spring supports option 1 option 2 ORDERING: Specify size, figure number, description, nominal pipe size or special O.D. and

More information

BS 3974 Pipe Supports. Section 4

BS 3974 Pipe Supports. Section 4 BS 3974 Pipe Supports Section 4 Section 4 of this catalogue has been compiled with the kind permission of the British Standard Institution. All data has been taken from BS 3974 Part 1 (1974), Part 2 (1978)

More information

Pipe Support Systems & Components. EDITION 3.

Pipe Support Systems & Components. EDITION 3. Pipe Support Systems & Components 10 899 4 sales@anchoragegroup.com.au www.anchoragegroup.com.au ABOUT ANCHORAGE GROUP ABOUT ANCHORAGE Leading manufacturing company Swift Metal Services designs, manufactures

More information

SECTION PIPE HANGERS AND SUPPORTS

SECTION PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

229 B-Line series Pipe Hangers & Supports

229 B-Line series Pipe Hangers & Supports accessories offered in this section are designed to reduce installation time. wide range of types and sizes are available for various applications. Materials For maximum loading design, Carbon Steel, Forged

More information

HANGERS, STRUT, AND FITTINGS SUBMITTAL

HANGERS, STRUT, AND FITTINGS SUBMITTAL HANGERS, STRUT, AND FITTINGS SUBMITTAL Prepared By: Submitted by: Enter Company Name INTERNATIONAL SEISMIC APPLICATION TECHNOLOGY A Division of Tomarco Contractor Specialties Enter Project Name 4848 Northam

More information

Product Specifications PIPE SUPPORT PRODUCTS

Product Specifications PIPE SUPPORT PRODUCTS Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorassociates.com 1 PICTORIAL INDEX FIG. 41 Page 8 FIG. 41 PVC Page 9 Fig. 42 Page 10 FIG. 43

More information

STANDARD PIPE CLAMP FIG. 520 & 521

STANDARD PIPE CLAMP FIG. 520 & 521 Designed to be used in the suspension of non-insulated pipe lines. Normally used in conjunction with Fig. 35 weldless eye nut, Fig. 50 eye rod or Fig. 55 welded eye rod to allow flexibility at the rod

More information

INTRODUCTION SAKETH EXIM

INTRODUCTION SAKETH EXIM Certificates INTRODUCTION SAKETH EXIM is an Industrial Powerhouse with a dominant presence in Manufacturing and Fabrication of Metal Products used in Pipe Support Systems, HVAC Anti Vibration System and

More information

Steel Fabricated Coupling

Steel Fabricated Coupling Steel Fabricated Coupling Straight Connection IMPORTANT LINKS Click appropriate words to go to: Standard Limited Warranty Sales Terms & Conditions Freight Policy Returns Policy Corrosion & Product Selection

More information

49 AXLE CENTERS FOR 5 ROUND AXLES. Part FRONT HANGER STRADDLE MOUNT EQUALIZER BOLT 1-14 X 6-1/4

49 AXLE CENTERS FOR 5 ROUND AXLES. Part FRONT HANGER STRADDLE MOUNT EQUALIZER BOLT 1-14 X 6-1/4 REYCO GRANNING MODEL 86/88 COMPONENTS 49 AXLE CENTERS FOR 5 ROUND AXLES Number Description 0046-20 FRONT HANGER STRADDLE MOUNT 12 00001-14 EQUALIZER BOLT 1-14 X 6-1/4 1 0084-00 FRONT HANGER UNDER MOUNT

More information

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole

Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female

More information

GRUVLOK FITTINGS FOR GROOVED-END PIPE

GRUVLOK FITTINGS FOR GROOVED-END PIPE GRUVLOK FITTINGS FOR GROOVED-END PIPE Gruvlok fittings are available through 24" nominal pipe size in a variety of styles. Use the Fitting Table to convert nominal pipe size to corresponding pipe These

More information

Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website:

Product Specifications PIPE SUPPORT PRODUCTS. For the most up to date information visit our website: Product Specifications PIPE SUPPORT PRODUCTS For the most up to date information visit our website: www.taylorpipesupports.ca PICTORIAL INDEX FIG. 41 Page 1 FIG. 41 PVC Page 2 FIG. 43 Page 3 FIG. E31 Page

More information

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications

Mechanical MATERIAL SPECIFICATIONS. Stainless Steel Housing Specifications. Gasket Specifications. Bolt / Nut Specifications 82 COUPLINGS SYSTEM The Grinnell Stainless Steel System is designed for joining 2" to 12" (54,0mm to 206,4mm) stainless steel piping, schedules 5, 10, and 40. The Figure 472 coupling patented Universal

More information

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p.

contents MALLEABLE PIPE FITTINGS BUsHEs NiPPlEs PlUgs caps BENds BackNUTs UNioNs TEEs 171 cross PN25 p socket PN25 p socket PN25 p. contents BUsHEs 140 Hexagon Bush p.5 NiPPlEs 144 octagon Nipple p.6 145 Hexagon Nipple p.6 PlUgs 146 Beaded Plug - solid p.7 147 Plain Plug - Hollow p.7 148 Plain Plug - solid p.7 149 countersunk Plug

More information

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L

TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS. INDEX Section L INDEX Section L TRANSPORT AUGER TUBE / UNDERCARRIAGE / DRIVE COMPONENTS TRANSPORT AUGER TUBE / UNDERCARRIAGE/ TF WHEEL MOVE L Description Page TF3, TF3, TF03, TF03 Basic Auger...L-3 TF, TF0 Basic Auger...L-

More information

Mite Mfg Co.098 Diesel X SIZE R0.217" " deep R0.111" Drill #21. Tap Drill #50. 1/4" deep on " PCD Tap 2-56 (3 places) R0.

Mite Mfg Co.098 Diesel X SIZE R0.217  deep R0.111 Drill #21. Tap Drill #50. 1/4 deep on  PCD Tap 2-56 (3 places) R0. 0.100" 0.074" 0.766" Ø0.398" Ø0.188" 25 Ø0.312" Ø0.125" 0.552" Ø0.250" (ream) 0.306" 0.166" 0.535" Ø0.775" Ø0.716" Screw cut 32 TPI 0.019 " deep -1 CRANKCASE Magnesium Die Casting with cast-in bronze bush

More information

VARIABLE SPRING SUPPORTS BV35, BV70, BV140, BV210

VARIABLE SPRING SUPPORTS BV35, BV70, BV140, BV210 SUPPORTS 35, 70, 140, 210 GENERAL Variable spring supports are used for supporting pipework, vessels, columns and pipe connections to large tanks, that are subject to thermal movement and/or subsidence.

More information

Electrical and Mechanical Supports Systems

Electrical and Mechanical Supports Systems Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional

More information

SPARE PARTS CATALOGUE and RETAIL PRICE LIST 1 JANUARY Ground breaking performance SOIL AERATION AND CULTIVATION EQUIPMENT SPARE PARTS

SPARE PARTS CATALOGUE and RETAIL PRICE LIST 1 JANUARY Ground breaking performance SOIL AERATION AND CULTIVATION EQUIPMENT SPARE PARTS SPARE PARTS CATALOGUE and RETAIL PRICE LIST 1 JANUARY 2013 Ground breaking performance SOIL AERATION AND CULTIVATION EQUIPMENT SPARE PARTS Please note Rata reserves the right to change the characteristics,

More information

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10)

Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) Offshore OSNA -10 Copper-Nickel Alloy for Seawater Piping Systems (CuNi 90/10) KME Germany GmbH & Co. KG Offshore OSNA -10 [GB] Content KME - The Company 1 The Material 2 Offshore Product Range 3 Pipes

More information

Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray

Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing

More information

Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s

Lindapter Fixing. Product Guide BAPP. G r o u p o f C o m p a n i e s Lindapter Fixing Product Guide Steelwork Fixings ype A Nose Recess ype A Malleable iron, bright zinc plated / hot dip galvanised Clamping Area K Skirt ail Steelwork clamp with recessed top to hold the

More information

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70

CHAIN & HOOKS. Proof Coil Chain Grade 28. Transport Chain Grade 70 Proof Coil Chain Grade 28 Proof coil chain is suitable for use as towing chain, logging,fencing, trailer safety chain, boat anchors, security barriers or other general purposes where chain of high tensile

More information

STRUCTURAL ATTACHMENT ELEMENTS

STRUCTURAL ATTACHMENT ELEMENTS STRUCTURAL ATTACHMENT ELEMENTS 7 PRODUCT GROUP 7 STRUCTURAL ATTACHMENTS, TRAPEZES CONTENTS PAGE 0 Structural attachments, trapezes 7.1 Weld-on clevis type 73 7.2 Weld-on eye plate type 75 7.2 Weld-on

More information

Beam Clamps. Materials & Finishes (Unless otherwise

Beam Clamps. Materials & Finishes (Unless otherwise Beam Clamps Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports

More information

Pipe/Conduit Clamps & Hangers

Pipe/Conduit Clamps & Hangers Our beam attachments and pipe supports offered in this section are designed to provide supports without drilling or welding. complete selection of beam clamps, pipe clamps, rollers, supports and accessories

More information

RT / RTE Rear Suspension

RT / RTE Rear Suspension RT / RTE Rear Suspension LIT NO: SP-168 DATE: January 2017 REVISION: F CONTENTS DESCRIPTION Parts Lists Page RT/RTE 34K 40K 46K.... 2 RT/RTE 48K 52K.... 4 RT 65K 70K Heavy-duty... 6 DESCRIPTION Selection

More information

420 X FU SERIES AXLE

420 X FU SERIES AXLE 420 X 220 150 FU SERIES AXLE 150 series axle is TUV tested to 11000Kg, please see website for test report. 335mm PCD 10 stud M22 hub and drum. 280.8mm hub pilot. Available in single and twin wheel stud.

More information

Steel / Cast iron body Independent chucks

Steel / Cast iron body Independent chucks Independent chucks Steel / Cast iron body Independent chucks Independent 4-jaw chucks - Jaws individually adjustable through threaded adjusting spindle. RÖHM-Independent chucks in steel or cast iron design

More information

STANDARD PRODUCTS CATALOG

STANDARD PRODUCTS CATALOG STANDARD PRODUCTS CATALOG 1 NO. 1 SUMMER 01 We are not limited to the enclosed items. We have the ability to custom fabricate products to meet your needs. A few of the items we also fabricate are: Pipe

More information

Index ADDITIONAL ANCILLARY ITEMS 342 OFFSET PIPE CLAMP 115A SLING ROD CAGE PIPE ROLLER 362 ADJUSTABLE SUPPORT ROLLER CHAIR

Index ADDITIONAL ANCILLARY ITEMS 342 OFFSET PIPE CLAMP 115A SLING ROD CAGE PIPE ROLLER 362 ADJUSTABLE SUPPORT ROLLER CHAIR ITIONL NILLRY ITEMS 1 Index 145 115 SLING RO GE 154 34 OFFSET PIPE LMP 31 PIPE ROLLER 11 EM LMP 348 JUSTLE PEESTL SUPPORT 13 3 JUSTLE SUPPORT ROLLER HIR 3 14 117 EM LMP 15 347 & 383 HOL OWN LMPS 35 SUPPORT

More information

GRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2", 2-1/2", 3" (4" special order)

GRATE-LOCK PRODUCT SPECIFICATIONS. GRATE-LOCK Plank with Grip or Smooth Surface. 1-1/2, 2-1/2, 3 (4 special order) QUALITY HOLE PRODUCTS PLANK GRATING McNICHOLS Quality Plank Grating includes a variety of channel configuration choices and walkway styles. Plank Grating is a one-piece construction product that is lightweight

More information

Edition 1 August Overhead Rail System. Models ZRAT, ZRA1, ZRA2 & ZRS2/3

Edition 1 August Overhead Rail System. Models ZRAT, ZRA1, ZRA2 & ZRS2/3 65985 Edition August 007 Overhead Rail System Models ZRAT, ZRA, ZRA & ZRS/ Table of Contents ZRAT Aluminum Rail & Components... Engineering Data for ZRAT Aluminum Rail... How to Order ZRAT Aluminum Runway

More information

Elite. KSB Australia Pty Ltd. Centrifugal Pump

Elite. KSB Australia Pty Ltd. Centrifugal Pump Type Series Booklet Elite Centrifugal Pump Application The Ajax Elite centrifugal pump is suitable for handling water and similar liquids mainly used in the following applications. -Water Supply -Air conditioning

More information

CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY

CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CTLOGUE Pipe Supports REGISTERED COMPNY MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY Who we are Founded in 2005 by Directors Hayden Froggatt

More information

DESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER

DESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER DESIGN TABLE OF PURLIN, GIRT, EAVE BEAM, TIE RUNNER RECOMMENDED RHS/SHS FOR GIRT TRUSS WIND SPEED WIND SPEED WIND SPEED WIND SPEED WIND SPEED WIND SPEED REMARK SPACING(m) 33 m/s 39 m/s 44 m/s 47 m/s 50

More information

Fig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece

Fig Fig. 290L: Left-Hand Thread. rod attachments. Extension piece ig. xtension piece Range: " through " Material: Malleable iron Maximum Temperature: 40 Service: or attaching hanger rod to various types of building attachments. pprovals: UL Listed ( " - " rod size) and

More information

Ebara Submersible Sewage Pumps (Single Channel Impeller)

Ebara Submersible Sewage Pumps (Single Channel Impeller) Ebara Submersible Sewage Pumps (Single Channel Impeller) Features and Applications Model DML 50Hz + Features! Non-clog single channel impeller Non-clog single channel impeller has 3 spherical passage and

More information

PHD Manufacturing, Inc.

PHD Manufacturing, Inc. 4408 Columbiana-Waterford Road Columbiana, Ohio 44408 Phone: (800) 2-276 (0) 482-9256 Fax: (0) 482-276 www.phd-mfg.com Effective April 99 2 Quick Reference This catalog updated on May, 205 For the most

More information

Shearseal Knife Gate Valves. Manufactured by TSE

Shearseal Knife Gate Valves. Manufactured by TSE Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle

More information

COMPANY PROFILE: Eastman Impex is a global company, established in year 1996 and it has been accredited with ISO 9001: 2008.

COMPANY PROFILE: Eastman Impex is a global company, established in year 1996 and it has been accredited with ISO 9001: 2008. COMPNY PROFILE: Eastman Impex is a global company, established in year 996 and it has been accredited with ISO 900: 008. Since 996 group is growing with increasing trend every year and now it comprises

More information

Product Catalogue. Version 8.0. Section. Arvin Meritor (ROR) Axle Components

Product Catalogue. Version 8.0. Section. Arvin Meritor (ROR) Axle Components Product Catalogue Section E Version 8.0 Arvin Meritor (ROR) Axle Components PRODUCT CATALOGUE 8.0 ArvinMeritor (ROR) Axle Type Capacity Wheel Fixing 300-0003-1D0F5 TM/T25010/ZMX 11,690 kg 10 stud M22 x

More information

P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS

P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS MALLEABLE P I P E F I T T I N G S OUR GENIUS IS PIPE FITTINGS Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS EN 10226-2 and

More information

VERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories

VERTICAL TURBINE PUMPS SECTION 115. Discharge Head and Accessories Peerless Pump Company SECTION 115 Page 0.1 May 19, 2005 Application Data Discharge Head and Accessories INDEX DATA & DIMENSIONS ITEM Type C & CHP 4 Type FA, FRA 7 Type S & SHP 5 Type UG 6 Column Flange,

More information

Credit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged

Credit Card and EFTPOS Facilities available. Phone Orders welcome Deliveries/Transport arranged Round, Square, Angle Page 3 Bright, Hollow Bar, Expanded Mesh Page 13 Flat Bar Page 4 House Columns/Posts Page 14 Channel, Structurals Page 5 Roofing, Purlins & Battens Page 15 RHS Square/Rectangular Tube

More information

Hardened & Ground Linear Shafts

Hardened & Ground Linear Shafts 56 Hardened & Ground Linear Shafts Hardness: Carbon Steel 61-66 Rockwell C Corrosion Resistant Steel 54-56 Rockwell C Tolerance: h6 standard, special tolerances upon request Finish: Ground and polished

More information

Duct suspensions & Support systems

Duct suspensions & Support systems lindab duct suspension & support system Duct suspensions & Support systems Lindab General information and theory Safe Silencers Dampers & Measure units Fire dampers & Smoke evacuation Air valves Roof hoods

More information

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50

030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 030/TL 03/01 50M, Copyright 2001, Anvil International $3. 50 Pipe Fitter Handbook Another Anvil Advantage Mini-catalog Installation Procedures Technical Data Copyright 2001 by Anvil International, Inc.

More information

RT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168

RT/RTE Series RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 LIT NO: SP-168 RT/RTE Series LIT NO: DATE: November 2004 REVISION: A RT/RTE-340/343/ 400/403/460/463 RT/RTE-480/ 503/520/523 HEAVY DUTY RT-650 RT/RTE -340/343/400/403/460/463 PARTS LIST 2 RT/RTE -340/343/400/403/460/463

More information

Air vane motors for special applications

Air vane motors for special applications Screwdriving technology Automation Air motors Air tools Air vane motors for special applications drilling motors 80-600 W milling motor 400 W grinding motors 150-1000 W robust and precise bearing high

More information

SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP

SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP SPRING HANGERS, SPRING SUPPORTS PRODUCT GROUP VARIABLE SPRING ELEMENTS CONTENTS PAGE 0 Spring hangers, spring supports, sway braces.1 Load table for spring hangers, spring supports and other spring elements.3

More information

PIPE & CONDUIT SYSTEMS. Free Call:

PIPE & CONDUIT SYSTEMS. Free Call: PIPE & CONDUIT SYSTEMS Free Call: 1800 899 480 www.anchoragegroup.com.au Anchorage pipe supports are designed and manufactured in Australia by leading manufacturing company, Swift Metal Services. Offering

More information

ER48FX730VLCA ER52FX730VL ER52FX730VLCA

ER48FX730VLCA ER52FX730VL ER52FX730VLCA PARTS MANUAL ER48FX730VL ER48FX730VLCA ER52FX730VL ER52FX730VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255

More information

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076

More information

TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices

TG/RB/2M/Web Rev.12/1/16. Pipe Hangers & Devices TG/RB/2M/Web Rev.12/1/16 Pipe Hangers & Devices Pipe Welcome Hangers to PHD & Devices Manufacturing PHD Manufacturing, Inc. was founded in 1972 by a group of industry veterans with strong management, financial,

More information

MB-825 Flange Mounted

MB-825 Flange Mounted Motor Brake Normal Duty MB-825 Flange Mounted 1/4-20 UNC-3B (4) on 10.50 dia. 5/16-18 UNC-3B (8) holes equally spaced on 8.85 dia.* 2.68 4.359 1/2-13 UNC-2A (4) on.250 dia.* 10.50 10.50 10.000.156.062

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves DQS Inc. Section AA 09/2017 THE FORD METER BOX COMPANY, INC. CERTIFIED TO ISO 9001:2015 10004466 Ford Service Saddles and Tapping Sleeves Contents Recommended Product Application *Steel *C900/909*** Cast

More information

PO Box 847 Greensburg, PA Phone (724) Fax (724) /0

PO Box 847 Greensburg, PA Phone (724) Fax (724) /0 PO Box 847 Greensburg, PA 15601-0847 Phone (724) 838-8320 Fax (724) 838-1544 All Stainless Steel All In Stock www.gibsonstainless.com Price List 114 7/01/08 1/1/16 PRICE LIST 118 Contents Item...Page Made

More information

Mechanical Piping.

Mechanical Piping. Mechanical Piping www.anvilintl.com JULY 2016 For the most current product/pricing information on Anvil products, please visit our website at www.anvilintl.com BUILDING CNNECINS HA LAS For over 160 years,

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

INDUSTRIAL PIPE SUPPORTS CATALOGUE

INDUSTRIAL PIPE SUPPORTS CATALOGUE INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT

More information

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development.

Introduction. We stay ahead of today s evolving market requirements by committing to a program of continued research and development. Pipes & Fittings SHIELD Introduction SHIELD is a company created to cater to the infrastructure, fire protection and building services industries with a comprehensive range of products designed to be competitive

More information

Structural Sections. Page 15

Structural Sections. Page 15 Page 15 MILD STEEL CHANNELS Product Shortname: CH AS 3679-300 AS 3679-350 (on indent only) BS4360-43A Mass per Metre = area of section x 0.00785 = kg/m Metres per Tonne = 1000 = metres kg/m Size (A x B)

More information

RT / RTE Rear Suspension

RT / RTE Rear Suspension RT / RTE Rear Suspension LIT NO: SP-8 DATE: Septemer 2015 REVISION: E CONTENTS DESCRIPTION Parts Lists Page RT/RTE 340/343/400/403/460/463.... 2 RT/RTE 0/3/520/523... 4 RT 6/700 Heavy-duty.... 6 DESCRIPTION

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

The applicable material specifications for ductile iron and rubber gaskets apply:

The applicable material specifications for ductile iron and rubber gaskets apply: 72 COUPLINGS - Grinnell Copper Grooved System is designed for joining copper tube size components 2" to 8" (54,0mm to 206,4mm) type K, L, M and DWV. All couplings and fittings are rated for working pressures

More information

Pipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips

Pipe Brackets - Pipe Support. Systems Brass Pipe brackets Brass Pipe clips Select Language Home Profile Products Contact Us Email Resources Brass Sanitary Fittings Brass Cable Glands Cable Gland Accessories Brass Fasteners Pipe Brackets - Pipe Support Systems Brass Pipe brackets

More information

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS

STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS STRAW MULCHERS WITH BLOWER MOD: GA-110 SLS / GA-130 SLS 1 03-55-0129 MOTOR,S HOODS ASSY.. "STICKER INCLUDED" 1 2 03-55-0050 MUFFLEUR HOODS ASSY. 1 3 01-55-0056 ROUND TUB "STICKER INCLUDED" 1 4 NC01-65-0076

More information

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS

Grooved End Fittings. System No. Submitted By Spec Sect Para Location Date Approved Date CARBON STEEL PIPE - GROOVED FITTINGS SEE VICTAULIC PUBLICATION 10.01 FOR DETAILS Victaulic offers a broad line of fittings in sizes through 60"/1500 in a variety of straight and reducing styles. Most standard fittings are cast of durable

More information

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM

PRODUCT CATALOGUE LOUCON METAL LTD. 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3. Hours of Operation: Monday-Friday 8:00 AM 5:00 PM PRODUCT CATALOGUE 37 and 39 Grenfell Crescent, Nepean, ON K2G 0G3 Hours of Operation: Monday-Friday 8:00 AM 5:00 PM Phone: (613) 226-1102 Fax: (613) 226-6097 e-mail: info@louconmetal.com web: www.louconmetal.com

More information

High-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading

High-strength structural bolting assemblies for preloading. Part 1: General requirements. Part 2: Suitability test for preloading 1. Scope and field of application Page 1 of 8 This Technical Data Sheet defines the requirements of high-strength bolt and nut assemblies with calibrated preload, HRC System, hexagon and cup head bolts,

More information

DC Duct & Sheet Metal LLC Office: 2520 Pennsylvania Avenue, SE Washington, DC 20020

DC Duct & Sheet Metal LLC Office: 2520 Pennsylvania Avenue, SE Washington, DC 20020 SHEET METAL WORKERS LOCAL 100 Office: 2520 Pennsylvania Avenue, SE Washington, DC 20020 Shop: 3711 Wells Avenue Mount Rainier, MD 20712 Spiral Duct Material Options Our products are fabricated from a variety

More information

Tooth thickness Dedendum. Addendum. Centre distance Nominal

Tooth thickness Dedendum. Addendum. Centre distance Nominal FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)

More information

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER

DIE DESIGN AND CONSTRUCTION SPECIFICATIONS STAMPING - EUROPE METRIC AIR CYLINDER METRIC AIR CYLINDER WITH STAINLESS STEEL PISTON ROD, ALUMINIUM CYLINDER TUBE AND WITHOUT MAGNETIC PISTON THIS STANDARD REFERS TO THE DIMENSIONS REQUIRED FOR INTERCHANGEABILITY FOR SINGLE ROD, DOUBLE ACTING

More information

$GGRQ6HWZLWK3LSHOHVVO\,QVWDOOHG6ROHQRLG9DOYH'5%

$GGRQ6HWZLWK3LSHOHVVO\,QVWDOOHG6ROHQRLG9DOYH'5% $GGRQ6HWZLWK3LSHOHVVO\,QVWDOOHG6ROHQRLG9DOYH'5% 3XUSRVH The add-on set serves for the attachment of position controllers SIPART PS 2 Type 6DR400x-xx to NAMUR thrust drives. A solenoid valve with an extended

More information

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm

HR930 Rotary Rake. Illustrated Parts Breakdown. Tongue & Main Frame. Gearbox & Tine Arm HR0 Rotary Rake Illustrated Parts Breakdown Page Page Page Page Page Page Tongue & Main Frame Guards Gearbox & Tine Arm Axle Assembly Rotary Gearbox PTO Shaft 0//0 Tongue & Main Frame 0 0 0 0 Ref# Description

More information

Ledex Rotary Solenoids Modifications and Custom Capabilities

Ledex Rotary Solenoids Modifications and Custom Capabilities Ledex Rotary Solenoids Modifications and Custom Capabilities Modifications and Customized Units For modifications including heavy duty return springs, drive pins, etc. please contact our application engineers

More information

FOR SERIAL NUMBERS THROUGH 60847

FOR SERIAL NUMBERS THROUGH 60847 PARTS MANUAL ER52FX730V FOR SERIAL NUMBERS 60706 THROUGH 60847 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX

More information

Registers for spiral ducts

Registers for spiral ducts Registers for spiral ducts RGS-3 5 The RGS-3 is a supply/return register with adjustable double deflection blades and a volume damper designed specifically for direct mounting on a spiral duct. The use

More information

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits

Heavy welded steel outlet half. 3/4-inch NPT test plug. Benefits 622 Tapping Sleeve Recessed cavity for mating to lip on standard tapping valves per MSS SP60. Heavy welded steel outlet half. 3/4-inch NPT test plug. Roll resistant, self-energizing concave wedge gasket.

More information

PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8" (41 MM) WIDTH SERIES CHANNEL

PIPE/CONDUIT CLAMPS, SUPPORTS AND HANGERS FOR 1 5 8 (41 MM) WIDTH SERIES CHANNEL PIPE/CONDUIT CLMPS, SUPPORTS ND HNGERS FOR 5 8" (4 MM) WIDTH SERIES CHNNEL Page Pipe/Conduit Clamps Pipe Hangers Pipe Rollers Pipe Brackets Reference Tables 2 40 4 44 MTERIL Unistrut pipe supports, unless

More information

HUTCH SUSPENSION. Hutch H7700 / H9700 Suspension. Axle Attaching Parts. Underslung Suspension

HUTCH SUSPENSION. Hutch H7700 / H9700 Suspension. Axle Attaching Parts. Underslung Suspension HUTCH SUSPENSION Underslung Suspension Front Back Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 5a Fig. 5b Fig. 6 Fig. 7 Fig. 8 U-Bolts And Nuts On Page 53 Hutch H7700 / H9700 Suspension Fabricated Weld-On &

More information

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs

Bulletin BX-512H. Bell & Gossett. Series HSC-S Pumps Technical Bulletin. Bell & Gossett. Part of the. Equipment Selection Programs Bulletin BX-1H Bell & Gossett Series HSC-S Pumps Technical Bulletin Part of the Bell & Gossett Equipment Selection Programs TABLE OF CONTENTS Useful Pump Formulas...............................................

More information

ETA-5 RAIL SYSTEMS. , Unified Industries, Inc. All Rights Reserved.

ETA-5 RAIL SYSTEMS. , Unified Industries, Inc. All Rights Reserved. RAIL SYSTEMS PAGE 1 TABLE OF CONTENTS PAGE Rail Profiles...2-4 Rail Load Charts...5-6 ETA-4 & Hangers...7-10 Inspection Gate...11 ETA-4 & Load Trolleys...12-15 ETA-4 & Festoon Trolley...16-19 ETA-4 &

More information

USE-USU. Steel independent chucks. Steel independent chucks USE-USU

USE-USU. Steel independent chucks. Steel independent chucks USE-USU USE-USU The jaws can be centered approximately by adjusting them to the concentric grooves, accurate centering requires the use of a dial indicator. Independent 4-jaw chuck Technical features: - jaws individually

More information

Champion Series Zero-Turn Riders & Mower Decks

Champion Series Zero-Turn Riders & Mower Decks Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP

More information

MALLEABLE PIPE FITTINGS

MALLEABLE PIPE FITTINGS M A L L E A B L E P I P E F I T T I N G S O UR GENI US I S PIPE FIT TI NG S Specification Pipe Threads The machined threads of Crane fittings are supplied to conform with the gauging requirements of BS

More information

Flange Mount (Fl/mt) Flange mount hangers may be welded or bolted to the frame, or a combination of bolting and welding may be used.

Flange Mount (Fl/mt) Flange mount hangers may be welded or bolted to the frame, or a combination of bolting and welding may be used. 240 Fabricated (H) HUTCHENS H9700 and CH9700 SUSPENSIONS All 9700 series suspensions are available with either fabricated or cast steel hangers and rockers. These hangers come in various styles. Straddle

More information

Pipe hanger solutions

Pipe hanger solutions Product catalog Middle East offering Pipe hanger solutions for commercial and industrial applications B00 series B00 - Standard clevis hanger Pipe will not pinch when installing. 5 swing in either direction

More information

FOR SERIAL NUMBERS 21304U00192 THROUGH U00534

FOR SERIAL NUMBERS 21304U00192 THROUGH U00534 PARTS MANUAL WYS52FX730V FOR SERIAL NUMBERS 21304U00192 THROUGH 201308U00534 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103

More information

VSC /VSCS Pumps Technical Brochure

VSC /VSCS Pumps Technical Brochure VSC /VSCS Pumps Technical Brochure BX-4C VSC/VSCS Construction Materials STANDARD SEAL CONFIGURATION PART NAME STANDARD CONSTRUCTION ASTM NO. Casing Cast iron A159 Class G0 Volute cover plate (Outboard)

More information

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS

COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS COUPLINGS HRC FLEXIBLE COUPLINGS CHAIN SHAFT COUPLINGS SPLINE CLUTCHES TORQUE LIMITERS TORQUE LIMITER COUPLINGS FLEXIBLE COUPLINGS HRC TYPE Hercus HRC Couplings are designed for general-purpose applications

More information

TMC 75 SPRING SUSPENSION

TMC 75 SPRING SUSPENSION TMC 75 SPRING SUSPENSION SERVICE MANUAL TMC Australia Pty Ltd Telephone: + 61 3 8786 3688 78 Star Crescent Facsimile: + 61 3 8786 3699 Hallam E-Mail: info@tmcaus.com.au Victoria 3803 Australia www.tmcaustralia.com.au

More information

Ford Service Saddles and Tapping Sleeves

Ford Service Saddles and Tapping Sleeves Section AA 04/2013; web revision 02/2014 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Company, Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260-563-3171

More information

COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications

COMMERCIAL AND INDUSTRIAL FITTINGS: CONDUIT BODIES. Applications Class I, Division per NEC 50.0(B)() Applications Larger body size facilitates pulling of large and heavy conductors. Specially designed raised cast covers provide additional wiring area. Mogul Unilets

More information

Rigid Metal Conduit, IMC or EMT K-Clamps

Rigid Metal Conduit, IMC or EMT K-Clamps 65178 Rigid Metal Conduit, IMC or EMT K-Clamps Wt. Lbs. Std. Catalog No. Size (In.) Per 100 Pkg. Right Angle Type Right Angle Type Hot Dip/Mechanically Galvanized* For Rigid, IMC, EMT PC-50RA 1/2 37.0

More information

TEL: Version: KW2

TEL: Version: KW2 WWW.KLAMBON.COM 1 Page Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to

More information

TMC 90 SPRING SUSPENSION

TMC 90 SPRING SUSPENSION TMC 90 SPRING SUSPENSION INSTALLATION and SERVICE MANUAL TMC AUSTRALIA PTY LTD Telephone: + (61) 3 8786 3688 78 Star Crescent, P.O. Box 5028 Facsimile: + (61) 3 8786 3699 Hallam, Victoria, 3083 E-mail:

More information