TEL: Version: KW2

Size: px

Start display at page:

Download "TEL: Version: KW2"

Eleanor Lee
5 years ago
Views:

1 1 Page

Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and

Their range includes GLEN ball and butterfly valves and Wilco snatch blocks. WRE acquired the business and property of Malleable Castings in April 2017.

Malleable have been a long-term supplier of castings to WRE and the synergistic benefits of the acquisition enable Malleable to increase the capacity of the

WRE also acquired the business of Africa Thermal Insulations (ATI) which now also trades as a division of West Rand Engineering.

We believe in green business and therefore we focus on the conservation of energy within the building industry and we strive to operate our business in a way

2 Klambon Water is a wholly owned subsidiary of West Rand Engineering (WRE), we are suppliers of valves, fittings and related products to all industries and our service extends to customers throughout the world. WRE was established in 1928 to cater for the needs of the hard rock mining industry. Their range includes GLEN ball and butterfly valves and Wilco snatch blocks. WRE acquired the business and property of Malleable Castings in April Malleable also trades as a division of WRE enabling WRE to become a fully local, South African manufacturer of Valves, Fittings, Mining and related products. Malleable have been a long-term supplier of castings to WRE and the synergistic benefits of the acquisition enable Malleable to increase the capacity of the foundry with a huge localization drive from South African customers. WRE also acquired the business of Africa Thermal Insulations (ATI) which now also trades as a division of West Rand Engineering. ATI manufactures, sells, markets and distributes building insulation products including PVC hose throughout Africa. We believe in green business and therefore we focus on the conservation of energy within the building industry and we strive to operate our business in a way that eliminates waste and conserves natural resources. These businesses are managed out of our offices in Johannesburg, Cape Town and Sydney, Australia. Klambon Water is perfectly positioned to serve the needs of all valued customers utilising the local expertise and manufacturing capabilities of WRE, Malleable Castings and ATI. 2 P a g e

3 Index Section A Glen Ball Valves Female Thread to Female Thread Shouldered to Female Thread Shouldered Flanged Section B Glen Butterfly Valves Shouldered Wafer Section C Clamps and Gaskets Shouldered Clamps and Gaskets Section D Manifolds Cast Shouldered Fabricated Section E Fabricated Fittings Shouldered and flanged 3 P a g e

4 Index Section F Pipe Couplings Wide Range Wide Range Step Dedicated Dedicated Step Gripper Section G- Flanged Adaptors Wide Range Flange Dedicate Flange Gripper Flange Section H Dismantling Joints Dismantling joints Section I Quick Adaptors Quick Adaptors for PVC and PE Pipes Quick Adaptors for Ductile Iron Pips 4 P a g e

5 Index Section J Valves and Strainers Resilient Seal Socketed Gate Valve Non-Rising Spindle Resilient Seal Flanged Gate Valve Non-Rising Spindle Resilient Seal Flanged Gate Valve Rising Spindle Metal Seated Gate Valve Non-Rising Spindle Swing Check Valve Y Strainer Section K Repair and Snap Clamp Repair Clamp Snap Clamp Section L Universal Tapping Saddle Universal Tapping Saddle Section M Reducing Flanges Reducing Flanged Section N Rubber Expansion Joints Rubber Expansion Joints Section O PVC Hose- Mining Hose SANS Dragline Hose SANS PIPE OD Chart 5 P a g e

6 SECTION A GLEN BALL VALVES s FEMALE TO FEMALE THREAD MANUFACTURED IN SOUTH AFRICA Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with minimum parts Full bore design reduces turbulence and decreases pressure drop through valve Robust cast body Spindle designed to prevent possibility of blow out Valve maintenance done in-situ Handles replaced easily by removing nut Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.8 Carbon Nut and Spring Washer S.G Iron Description 15 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 20 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 25 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 32 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 40 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 50 ball valve with a 90 rotating handle, stainless steel spindle and female to female BSP thread 80 ball valve with a 360 rotating handle, mild steel spindle and female to female BSP thread A B C Working Pressure (kpa) Working Temperature ( C) to to to to to to to 80 6 P a g e

SHOULDERED TO FEMALE THREAD MANUFACTURED IN SOUTH AFRICA Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with

maintenance done in-situ Handles replaced easily by removing nut Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.

G Iron DESCRIPTION 50 shouldered to 25 female BSP thread ball valve with a 360 rotating handle and a stainless steel spindle 50 shouldered to 25 female BSP thread ball

7 SHOULDERED TO FEMALE THREAD MANUFACTURED IN SOUTH AFRICA Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with minimum parts Full bore design reduces turbulence and decreases pressure drop through valve Robust cast body Spindle designed to prevent possibility of blow out Valve maintenance done in-situ Handles replaced easily by removing nut Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.8 Carbon Nut and Spring Washer S.G Iron DESCRIPTION 50 shouldered to 25 female BSP thread ball valve with a 360 rotating handle and a stainless steel spindle 50 shouldered to 25 female BSP thread ball valve with a 90 rotating handle and a stainless steel spindle 50 shouldered to 25 female BSP thread ball valve with a 90 lockable rotating handle and a stainless steel spindle A B C Working Pressure (kpa) Working Temperature ( C) to to to 80 7 P a g e

SHOULDERED MANUFACTURED IN SOUTH AFRICA s Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with minimum parts Full bore design reduces turbulence

8 SHOULDERED MANUFACTURED IN SOUTH AFRICA s Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with minimum parts Full bore design reduces turbulence and decreases pressure drop through valve Robust cast body Spindle designed to prevent possibility of blow out Valve maintenance done in-situ Handles replaced easily by removing nut Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.8 Carbon Nut and Spring Washer S.G Iron DESCRIPTION 48 shouldered ball valve with a 360 rotating handle with a stainless steel spindle 50 shouldered ball valve with a 360 rotating handle with a stainless steel spindle 80 shouldered ball valve with a 360 lockable rotating handle with a stainless steel spindle 100 shouldered ball valve with a 360 lockable rotating handle with a stainless steel spindle A B C Working Pressure (kpa) Working Temperature ( C) to to to to 80 8 P a g e

FLANGED MANUFACTURED IN SOUTH AFRICA s Material of Construction Floating Ball Design for improved sealing and

decreases pressure drop through valve Robust cast body Spindle designed to prevent possibility of blow out Valve

Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.

G Iron DESCRIPTION A B C Working Pressure (kpa) Working Temperature ( C) 50 table D flanged ball valve with a 360

9 FLANGED MANUFACTURED IN SOUTH AFRICA s Material of Construction Floating Ball Design for improved sealing and higher pressure Bi-directional operation Compact valve with minimum parts Full bore design reduces turbulence and decreases pressure drop through valve Robust cast body Spindle designed to prevent possibility of blow out Valve maintenance done in-situ Handles replaced easily by removing nut Other drilling options available upon request Handle Spindle Seats Ball Fasteners Body and Cap Mild Steel Stainless Steel Nitrile Stainless Steel 4.8 Carbon Nut and Spring Washer S.G Iron DESCRIPTION A B C Working Pressure (kpa) Working Temperature ( C) 50 table D flanged ball valve with a 360 rotating handle to table D flanged ball valve with a 360 rotating handle to table D flanged ball valve with a 360 rotating handle to 80 9 P a g e

SECTION B GLEN BUTTERFLY VALVES SHOULDERED MANUFACTURED IN SOUTH AFRICA Designed to meet international standards Extremely rugged Simple to install and operate No lubrication necessary Low

Lined Disc Spheroidal Graphite Iron, Nitrile Rubber Coated or 316 Stainless Steel Spindle Cast Iron or 316 Stainless Steel Rubber Lining Nitrile Rubber (EPDM available ) SIZE DESCRIPTION A () B () C

10 SECTION B GLEN BUTTERFLY VALVES SHOULDERED MANUFACTURED IN SOUTH AFRICA Designed to meet international standards Extremely rugged Simple to install and operate No lubrication necessary Low maintenance cost Throttling facility by using the optional multi-stop handle Easy adaptation to flanged pipe lines Corrosion and abrasion resistant Body Spheroidal Graphite Iron, FBE Coated or NBR Lined Disc Spheroidal Graphite Iron, Nitrile Rubber Coated or 316 Stainless Steel Spindle Cast Iron or 316 Stainless Steel Rubber Lining Nitrile Rubber (EPDM available ) SIZE DESCRIPTION A () B () C () Pressure (kpa) Temperature ( C) 50 SH Shouldered butterfly valve with a 90 lever and stainless steel spindle to SH Shouldered butterfly valve with a multi-stop lever and stainless steel spindle to SH Shouldered butterfly valve with a 90 lever and cast iron spindle to SH Shouldered butterfly valve with a 90 lever and stainless steel spindle to SH Shouldered butterfly valve with a multi-stop lever and cast iron spindle to SH Shouldered butterfly valve with a multi-stop lever and stainless steel spindle to SH Shouldered butterfly valve with a hand wheel actuator and cast iron spindle to SH Shouldered butterfly valve with a hand wheel actuator and stainless steel spindle to SH Shouldered butterfly valve with a 90 lever and cast iron spindle to SH Shouldered butterfly valve with a multi-stop lever and cast iron spindle to SH Shouldered butterfly valve with a multi-stop lever and stainless steel spindle to SH Shouldered butterfly valve with a hand wheel actuator and cast iron spindle to SH Shouldered butterfly valve with a hand wheel actuator and stainless steel spindle to SH Shouldered butterfly valve with a 90 lever and cast iron spindle to SH Shouldered butterfly valve with a multi-stop lever and cast iron spindle to SH Shouldered butterfly valve with a multi-stop lever and stainless steel spindle to SH Shouldered butterfly valve with a hand wheel actuator and stainless steel spindle to P a g e

WAFER MANUFACTURED IN SOUTH AFRICA s Designed to meet international standards Extremely rugged Simple to install and operate Handwheel handle available on request No lubrication necessary Low

11 WAFER MANUFACTURED IN SOUTH AFRICA s Designed to meet international standards Extremely rugged Simple to install and operate Handwheel handle available on request No lubrication necessary Low maintenance cost Throttling facility by using the optional multi-stop handle Easy adaptation to flanged pipe lines Corrosion and abrasion resistant Non-toxic WRAS approved gasket and coating Material of Construction Body Shaft Disc Bushing Liner O-Ring Coating Cast Iron Stainless Steel Stainless Steel PTFE EPDM EPDM Fusion Bonded Epoxy Size A () B () C () D () E () Φ Pressure (kpa) Temperature ( C) C to 120 C C to 120 C C to 120 C C to 120 C C to 120 C C to 120 C C to 120 C 11 P a g e

SECTION C CLAMPS AND GASKETS CAST SHOULDERED CLAMPS MANUFACTURED IN SOUTH AFRICA

() Working Pressure (kpa) Bolt Size () OD () ID () L () H () 50 60.

12 SECTION C CLAMPS AND GASKETS CAST SHOULDERED CLAMPS MANUFACTURED IN SOUTH AFRICA ALTERNATIVE COLOURS ARE AVAILABLE UPON REQUEST MANUFACTURED TO SANS 815 Size Pipe OD () Working Pressure (kpa) Bolt Size () OD () ID () L () H () M12x M12x M16x M16x M16x REPLACEMENT GASKETS AVAILABLE UPON REQUEST REPLACEMENT FASTENERS AVAILABLE UPON REQUEST 12 P a g e

` SECTION D MANIFOLDS CAST SHOULDERED MANUFACTURED IN SOUTH AFRICA DESCRIPTION 50 SHOULDERED INLET 5X50 SHOULDERED OUTLET GALVANIZED DESCRIPTION 100 SHOULDERED INLET

13 ` SECTION D MANIFOLDS CAST SHOULDERED MANUFACTURED IN SOUTH AFRICA DESCRIPTION 50 SHOULDERED INLET 5X50 SHOULDERED OUTLET GALVANIZED DESCRIPTION 100 SHOULDERED INLET 5X50 SHOULDERED OUTLET GALVANIZED DESCRIPTION 50 SHOULDERED INLET 5X50 SHOULDERED OUTLET PAINTED DESCRIPTION 100 SHOULDERED INLET 5X50 SHOULDERED OUTLET PAINTED 13 P a g e

BALL VALVE DESCRIPTION 200 TABLE D FLANGED

14 FABRICATED MANUFACTURED IN SOUTH AFRICA DESCRIPTION 50 SHOULDERED MANIFOLD 5X25 BALL VALVE DESCRIPTION 100 SHOULDERED MANIFOLD 50 BALL VALVE INLET 4X25 BALL VALVE DESCRIPTION 150 TABLE D FLANGED MANIFOLD 1X50 BALL VALVE 6X25 KWIKFIT COMBI BALL VALVE DESCRIPTION 200 TABLE D FLANGED MANIFOLD 1X50 BALL VALVE 6X25 KWIKFIT COMBI BALL VALVE 14 P a g e

DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged 90 Elbow DESCRIPTION DN50 - DN200 Nominal Bore

15 SECTION E FABRICATED FITTINGS SHOULDERED MANUFACTURED IN SOUTH AFRICA DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged Equal T DESCRIPTION DN50-DN200 Nominal Bore Shouldered/ Flanged Unequal T DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged 90 Elbow DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged 90 Segmented Bend DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged 45 Elbow 15 P a g e

DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged Concentric

16 DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged 45 Segmented Bend DESCRIPTION DN50 - DN200 Nominal Bore Flanged to Shouldered Adaptor DESCRIPTION DN50 - DN200 Nominal Bore Shouldered/ Flanged Concentric Butt-weld Reducer FLANGE DRILLED TO BS 4504; BSEN 1092; SANS 1123 AND BS10 16 P a g e

SECTION F PIPE COUPLINGS WIDE RANGE Connect plain ended pipes of various outside diameter with the same or different nominal bore Profiled gasket allowing for smooth installation Providing a

must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve

17 SECTION F PIPE COUPLINGS WIDE RANGE Connect plain ended pipes of various outside diameter with the same or different nominal bore Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection of 5 degrees Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve Sleeve End Rings Gaskets Fasteners Alternative Coating DN Rolled Steel DN Ductile Iron DN Ductile Iron EPDM Electro Galvanized 316 Stainless Steel Fusion Bonded Epoxy 17 P a g e

WIDE RANGE STEP COUPLING Connect plain ended pipes of various outside diameter with the same or different nominal bore Profiled gasket allowing for smooth installation Providing a leak tight seal

18 WIDE RANGE STEP COUPLING Connect plain ended pipes of various outside diameter with the same or different nominal bore Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection of 5 degrees Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve End Rings Gaskets Fasteners Alternative Coating DN Rolled Steel DN Ductile Iron EPDM Electro Galvanized 316 Stainless Steel Fusion Bonded Epoxy 18 P a g e

DEDICATED COUPLING Connect plain ended pipes to plain ended pipes with the same outside diameter Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside

approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes greater than DN2400 are available on

19 DEDICATED COUPLING Connect plain ended pipes to plain ended pipes with the same outside diameter Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection: DN (6 ), DN (5 ), DN (4 ), DN (3 ), DN (2 ), DN1800 (1 ) Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes greater than DN2400 are available on request Pressures greater than 16 bar are available on request Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve DN50 125NB Ductile Iron Sleeve DN Rolled Steel End Rings DN Ductile Iron End Rings DN Rolled Steel Gaskets EPDM Fasteners Electro Galvanized Alternative 316 Stainless Steel Coating Fusion Bonded Epoxy 19 P a g e

DEDICATED STEP COUPLING Connect plain ended pipes to plain ended pipes with different outside diameters Profiled gasket allowing for smooth installation Providing a

(4 ), DN750-1200 (3 ), DN1200-1800 (2 ), DN1800 (1 ) Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design

Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve DN50 125 Ductile Iron Sleeve DN150-2400 Rolled Steel End Rings DN50-300 Ductile Iron

20 DEDICATED STEP COUPLING Connect plain ended pipes to plain ended pipes with different outside diameters Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection: DN (6 ), DN (5 ), DN (4 ), DN (3 ), DN (2 ), DN1800 (1 ) Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes greater than DN2400 are available on request Pressures greater than 16 bar are available on request Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve DN Ductile Iron Sleeve DN Rolled Steel End Rings DN Ductile Iron End Rings DN NB Rolled Steel Profile Plate Steel Gaskets EPDM Fastener Bolts Electro Galvanized Fastener Studs 316 Stainless Steel Coating Fusion Bonded Epoxy 20 P a g e

GRIPPER COUPLING Couplings are designed to resist end pull-out on PE and PVC pipes It is the fastening action of the Gripper Ring that secures the coupling onto the pipe resisting end pull-out

21 GRIPPER COUPLING Couplings are designed to resist end pull-out on PE and PVC pipes It is the fastening action of the Gripper Ring that secures the coupling onto the pipe resisting end pull-out Profiled gasket allowing for smooth installation Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Sleeve End Rings Gripper Ring Gaskets Fastener Alternative Coating Ductile Iron Ductile Iron Brass EPDM Electro Galvanized 316 Stainless Steel Fusion Bonded Epoxy 21 P a g e

SECTION G FLANGE ADAPTORS WIDE RANGE FLANGE ADAPTORS Connect plain ended pipes of various outside diameters to flanged equipment Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Profiled

WRAS approved gasket and coating Maximum Working Pressure 16 Bar Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice

22 SECTION G FLANGE ADAPTORS WIDE RANGE FLANGE ADAPTORS Connect plain ended pipes of various outside diameters to flanged equipment Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection of 2 degrees Non-toxic WRAS approved gasket and coating Maximum Working Pressure 16 Bar Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Corrosion Protection Sleeve Ductile Iron End Ring Ductile Iron Flange Ductile Iron Gaskets EPDM Fasteners Electro Galvanized Alternative 316 Stainless Steel Coating Fusion Bonded Epoxy Fusion bonded epoxy 22 P a g e

DEDICATED FLANGED ADAPTORS Connect plain ended pipes to flanged equipment Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Profiled gasket allowing for smooth installation Providing a leak

23 DEDICATED FLANGED ADAPTORS Connect plain ended pipes to flanged equipment Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Profiled gasket allowing for smooth installation Providing a leak tight seal across the outside diameter of the pipe Thermal expansion and contraction of 5 per gasket Angular deflection: DN (3 ), DN (2 ), DN (1 ), DN (1 ), DN1800+ (0 ) Non-toxic WRAS approved gasket and coating Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes greater than DN2400 are available on request Pressures greater than 16 bar are available on request Maximum Working Pressure 16 Bar Corrosion Protection Fusion bonded epoxy Sleeve DN50 125NB Ductile Iron Sleeve DN Rolled Steel End Rings DN Ductile Iron End Rings DN Rolled Steel Flange Steel Plate Gaskets EPDM Fasteners 316 Stainless Steel Coating Fusion Bonded Epoxy 23 P a g e

GRIPPER FLANGED ADAPTORS Couplings are designed to resist end pull-out on PE and PVC pipes It is the fastening action of the Gripper Ring that secures the coupling onto the

ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Sleeve End

24 GRIPPER FLANGED ADAPTORS Couplings are designed to resist end pull-out on PE and PVC pipes It is the fastening action of the Gripper Ring that secures the coupling onto the pipe resisting end pull-out Flange drilling to BS 4504; BSEN 1092 and SANS 1123 Profiled gasket allowing for smooth installation Notes Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Sleeve End Rings Flange Gripper Ring Gaskets Fasteners Alternative Coating Ductile Iron Ductile Iron Steel Plate Brass EPDM Electro Galvanized 316 Stainless Steel Fusion Bonded Epoxy 24 P a g e

SECTION H DISMANTLING JOINTS DISMANTLING JOINTS A composite fitting featuring a telescopic action, designed to provide longitudinal adjustment between a flanged pipe and flanged equipment Flange

same as the mating flange Non-toxic WRAS approved gasket and coating Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes

25 SECTION H DISMANTLING JOINTS DISMANTLING JOINTS A composite fitting featuring a telescopic action, designed to provide longitudinal adjustment between a flanged pipe and flanged equipment Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Provide a simple method for installation and removal of flanged equipment such as valves and pumps Thickness of flanges will not necessarily be the same as the mating flange Non-toxic WRAS approved gasket and coating Gaskets must be lubricated to allow ease of installation Design and materials are subjected to change without prior notice Sizes greater than DN2400 are available on request Pressures greater than 16 bar are available on request Maximum Working Pressure 16 Bar Notes Corrosion Protection Fusion bonded epoxy Sleeve Sleeve End Ring End Ring Flange Spigot Gaskets Fastener Studs Alternative Fastener Tie Rods Alternative Coating DN Ductile Iron DN Rolled steel DN Ductile Iron DN Rolled Steel Steel Plate Steel Plate and Rolled Steel EPDM 316 Stainless Steel 316 Stainless Steel Electro Galvanized 316 Stainless Steel Fusion Bonded Epoxy 25 P a g e

Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure 16 bar Corrosion Protection

26 SECTION I QUICK ADAPTORS QUICK ADAPTORS FOR PVC AND PE PIPES Quick adaptors are used to connect PVC and PE pipes to flanged equipment A Gripper Ring is introduced to connect PE pipes to Flanged equipment. Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure 16 bar Corrosion Protection Sleeve Ductile Iron Flange Ductile Iron Gaskets EPDM Gripper Ring Brass Coating Fusion Bonded Epoxy Fusion bonded epoxy 26 P a g e

27 DN OD L () P a g e

28 DN OD L () P a g e

bar Corrosion Protection Fusion bonded epoxy Sleeve Flange Gripper Teeth Gasket Coating Ductile Iron Ductile Iron Carbon

29 QUICK ADAPTORS FOR DUCTILE IRON PIPES Quick adaptors are used to connect Ductile Iron pipes to flanged equipment by inserting teeth into the rubber Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Sleeve Flange Gripper Teeth Gasket Coating Ductile Iron Ductile Iron Carbon Steel EPDM Fusion Bonded Epoxy DN OD L () P a g e

SECTION J VALVES AND STRAINERS RESILIENT SEAL SOCKETED GATE VALVE NON-RISING SPINDLE Non-Rising Spindle Fusion-Bonded Epoxy Powder Coated EPDM Rubber-lined S.

and closing 50-450 Sizes available Maximum Working Pressure 16 bar Corrosion Protection Body Ductile Iron Bonnet Ductile Iron Gland Ductile Iron HW/Cap Ductile Iron Stem

30 SECTION J VALVES AND STRAINERS RESILIENT SEAL SOCKETED GATE VALVE NON-RISING SPINDLE Non-Rising Spindle Fusion-Bonded Epoxy Powder Coated EPDM Rubber-lined S.G Iron Gate Supplied Socketed Right or Left-Hand Closing Cap-Top or Hand Wheel Operated Wedge Coated to EPDM Face-to-Face length according to SABS 664 Low Torque opening and closing Sizes available Maximum Working Pressure 16 bar Corrosion Protection Body Ductile Iron Bonnet Ductile Iron Gland Ductile Iron HW/Cap Ductile Iron Stem Nut Bronze Spindle Stainless Steel Fastener Stainless Steel Coating Fusion Bonded Epoxy Fusion bonded epoxy DN () L () H () P a g e

Hand Wheel operated Resilient Sealed to EN 1171 Face-to-Face length according to SABS 664 Flange Connection Low Torque opening and closing Maximum Working Pressure 16 bar Corrosion Protection Fusion

31 RESILIENT SEAL FLANGED GATE VALVE NON-RISING SPINDLE Non-Rising Spindle Fusion Bonded Epoxy Powder Coated EPDM Rubber Lined S.G Iron Gate Supplied either Socketed or Flanged Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Non-Drilled Flanged Valves can be supplied on request Right or Left-Hand Closing Cap-Top or Hand Wheel operated Resilient Sealed to EN 1171 Face-to-Face length according to SABS 664 Flange Connection Low Torque opening and closing Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Body Ductile Iron Wedge EPDM Wedge Core Ductile Iron Stem Nut Stem Stem Stainless Steel Gasket EDPM Stud Stainless Steel Bonnet Ductile Iron O-Ring EDPM Back Seat EDPM Washer Stainless Steal O-Ring EPDM O-Ring EPDM Gland Ductile Iron Dust Proof Cover EPDM Cap Ductile Iron Stud Stainless Steel Stud Stainless Steel Guide Nylon Coating Fusion Bonded Epoxy 31 P a g e

DN () L () H () D () K () D1 () n-d () b () f () 50 216 358 165 125 98 4-18 19 3 80 229 413 200 160 132 8-18 19 3 100 254 435 220 180 156 8-18 19 3

32 DN () L () H () D () K () D1 () n-d () b () f () P a g e

RESILIENT SEAL FLANGED GATE VALVE RISING SPINDLE Valves comply with AWWA C515 Superior stem graphite packing Packing replaceable under pressure Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS

33 RESILIENT SEAL FLANGED GATE VALVE RISING SPINDLE Valves comply with AWWA C515 Superior stem graphite packing Packing replaceable under pressure Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Cap-Top or Hand Wheel operated Working temperature -10 to 120 C Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Body Bonnet Wedge Stem Gasket Wedge Nut Bolts on bonnet flange Gland Gland bolts Yoke Nut Handwheel Handwheel Nut Coating Ductile Iron Ductile Iron Ductile Iron / EPDM Coated Stainless Steel EPDM Stainless Steel Carbon Steel Ductile Iron Stainless Steel Bronze Ductile Iron Ductile Iron Fusion Bonded Epoxy Size L H (Open) H (Closed) C P a g e

METAL SEATED GATE VALVE NON-RISING SPINDLE Valves comply with EN1171, BS5150, BS3464 or MSS SP-70 Metal Seat: Bronze or 304 Stainless Steel Adjustable Stem Seat Available with Handwheel, Gearbox or

34 METAL SEATED GATE VALVE NON-RISING SPINDLE Valves comply with EN1171, BS5150, BS3464 or MSS SP-70 Metal Seat: Bronze or 304 Stainless Steel Adjustable Stem Seat Available with Handwheel, Gearbox or Actuator Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Face to Face dimensions in accordance with: EN558-1 Basic Series 3, Series 15 and ASME B16.10 Maximum Working Pressure 16 bar for all sizes 25 bar for DN 50-DN 300 Corrosion Protection Fusion Bonded Epoxy Body Ductile Iron Bonnet Ductile Iron Seat Stainless Steel (Bronze available) Wedge Ductile Iron Wedge Trim Stainless Steel (Bronze available) Stem Stainless Steel (Brass available) Wedge Nut Brass Gasket Graphite Packing Graphite Packing Nut Stainless Steel Bonnet Bolts and Nuts Carbon Steel Handwheel Ductile Iron 34 P a g e

35 Size 50 L EN558-1 Series 3 Asme B EN558-1 Series EN558-1 Series BS H D P a g e

SWING CHECK VALVE Designed to BS5163 Rubber seated Body and bonnet ductile iron Carbon steel plug and bolts EPDM Gasket Flange drilling to BS 4504; BSEN 1092;

Gasket Cast Iron Cast Iron Brass Stainless Steel Ductile Iron Cast Iron Bronze (EPDM/NRB available) Bronze Graphite Size DN50 DN65 DN80 DN100 DN125 DN150 DN200

36 SWING CHECK VALVE Designed to BS5163 Rubber seated Body and bonnet ductile iron Carbon steel plug and bolts EPDM Gasket Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure 16 Bar Corrosion Protection Fusion Bonded Epoxy Body Cover Side Plug Hanger Pin Hanger Disc Disc Trim Body Trim Gasket Cast Iron Cast Iron Brass Stainless Steel Ductile Iron Cast Iron Bronze (EPDM/NRB available) Bronze Graphite Size DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 L H P a g e

Y STRAINER Face to Face dimensions to DIN3202-F1 Body and bonnet ductile iron Carbon steel plug and bolts Screen is SS304 EPDM Gasket Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10

37 Y STRAINER Face to Face dimensions to DIN3202-F1 Body and bonnet ductile iron Carbon steel plug and bolts Screen is SS304 EPDM Gasket Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure 16 Bar Corrosion Protection Fusion Bonded Epoxy Body Cover Screen Gasket Plug Coating Ductile Iron Ductile Iron Stainless Steel Graphite Ductile Iron Fusion Bonded Epoxy Size DN50 DN65 DN80 DN100 DN125 DN150 DN200 DN250 DN300 DN350 DN400 DN450 DN500 DN600 A B Plug 1/ /4 1-1/2 1-1/ P a g e

SECTION K - REPAIR AND SNAP CLAMPS REPAIR CLAMPS Repair Clamps are a wide-spread range of stainless steel pipe repair clamps which should not be used to join pipes The Clamps offer a permanent repair

circumferential repair clamps, complete with a stainless steel armour plate vulcanized into the rubber seal at the time of moulding Installation in poor site conditions is made easy with a simple

38 SECTION K - REPAIR AND SNAP CLAMPS REPAIR CLAMPS Repair Clamps are a wide-spread range of stainless steel pipe repair clamps which should not be used to join pipes The Clamps offer a permanent repair for many types of pipe The Clamps include various clamp lengths which range up to 1200 wide and are suitable for practically any pipe material Products from DN40 and greater are supplied as full circumferential repair clamps, complete with a stainless steel armour plate vulcanized into the rubber seal at the time of moulding Installation in poor site conditions is made easy with a simple flip over action and self-retaining bolts An all-inclusive gasket offers a reliable seal even on corroded pipes Clamp Shell Studs and Nut Stud Coating Bolting Mechanism Nut Cap Rubber Seal Armour Plate Stainless Steel Stainless Steel Molybdinum Disulfide Telfon Dry Film Lubricant Stainless Steel Polypropylene Plastic EPDM (nitrile and Vton available on request) Stainless Steel 304 (316 on request) 38 P a g e

SNAP CLAMPS Snap Clamps are used for repairing pin-hole breaks in small diameter pipes, they provide a quick, easy and cost-effective solution for this type of break Clamp Shell Bolt

39 SNAP CLAMPS Snap Clamps are used for repairing pin-hole breaks in small diameter pipes, they provide a quick, easy and cost-effective solution for this type of break Clamp Shell Bolt and Nut Bolt and Nut Coating Lugs Lugs Coating Rubber Seal Stainless Steel 304 (316 available in request) Mild Steel Hot Dip Galvanized Ductile Iron Hot Dip Galvanized EPDM 39 P a g e

SECTION L UNIVERSAL TAPPING SADDLE UNIVERSAL TAPPING SADDLE Universal Tapping Saddles are used to make permanent (Hot) Tapping into existing or new water and air

Rubber is EPDM, SBR/NR Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Body Gasket Boltings Inserts Straps Coating Ductile Iron EPDM

40 SECTION L UNIVERSAL TAPPING SADDLE UNIVERSAL TAPPING SADDLE Universal Tapping Saddles are used to make permanent (Hot) Tapping into existing or new water and air lines The saddle uses a Stainless-Steel Strap that is tightened with fasteners on either side Pipe outside diameters range from Body is Ductile Iron and Rubber is EPDM, SBR/NR Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Body Gasket Boltings Inserts Straps Coating Ductile Iron EPDM Stainless Steel Nylon/SS SS304 Fusion Bonded Epoxy Thread Outlet DN () Strap Num Bolting Size M12 3/4" M M M16 40 P a g e

SECTION M REDUCING FLANGES REDUCING FLANGES Used to connect flanges with different diameters Flange Drilling ISO7005-2/EN1092-2 PN10/PN16 Ductile Iron Body with Fusion Bonded Epoxy Coating Maximum

41 SECTION M REDUCING FLANGES REDUCING FLANGES Used to connect flanges with different diameters Flange Drilling ISO7005-2/EN PN10/PN16 Ductile Iron Body with Fusion Bonded Epoxy Coating Maximum Working Pressure 16 bar Corrosion Protection Fusion bonded epoxy Body Fasteners Coating Ductile Iron Electro Galvanized Fusion Bonded Epoxy Size () Bolt Size () Bolt Number Bolt Size () Bolt Number DN40-60 M16 8 DN40-80 M16 8 DN50-60 M16 8 DN50-80 M16 8 DN M16 12 DN60-80 M16 8 DN65-80 M16 12 DN M16 12 DN M16 16 DN M16 16 DN M16 8 DN M16 16 DN M16 8 M20 8 DN M16 8 M20 16 DN M16 8 M20 8 DN M20 16 DN M20 8 DN M20 8 DN M20 20 DN M20 8 DN M P a g e

SECTION N RUBBER EXPANSION JOINTS RUBBER EXPANSION JOINTS Rubber: EPDM/NBR Carcass: Nylon Cord Fabric Reinforcing Wire: Spring Steel Flanges: Carbon Steel Working Pressure: 16Bar Flange drilling to

42 SECTION N RUBBER EXPANSION JOINTS RUBBER EXPANSION JOINTS Rubber: EPDM/NBR Carcass: Nylon Cord Fabric Reinforcing Wire: Spring Steel Flanges: Carbon Steel Working Pressure: 16Bar Flange drilling to BS 4504; BSEN 1092; SANS 1123 and BS 10 Maximum Working Pressure DN32-DN300: 16 bar DN350-DN600: 10 bar Corrosion Protection Fusion bonded epoxy Rubber Carcass Reinforcing Wire Flange Coating EPDM/NBR/Neoprene Nylon Cord Fabric Spring Steel Wheel Carbon Steel, Since Plated Fusion Bonded Epoxy Size L±5 Axial Compression Axial Elongation Lateral Movement Angular Movement DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN DN P a g e

` SECTION O PVC HOSE MINING HOSE SANS 1086-2007 MANUFACTURED IN SOUTH AFRICA Supplied in sizes 10, 12.

43 ` SECTION O PVC HOSE MINING HOSE SANS MANUFACTURED IN SOUTH AFRICA Supplied in sizes 10, 12.5, 20, 25, 32, 40 & 50 SANS 1086 available in orange, blue, green (Custom colours available on request) Operating pressure: 9-17 bar (Dependent on hose size) Temperature range: 0 C - 40 C Supplied plain-ended or as complete hose assemblies of 30m Applications include: Compressors, jack haers, pneumatic tools, high-pressure air and water conveyance Oil resistant and non-absorbent Maximum Working Pressure Please refer to below table Outer Layer Inner Layer Reinforcement PVC PVC Polyester DESCRIPTION MAXIMUM OPERATING PRESSURE BURSTING PRESSURE 10 PVC MINING HOSE 17 BAR 68 BAR 12.5 PVC MINING HOSE 17 BAR 68 BAR 20 PVC MINING HOSE 15 BAR 60 BAR 25 PVC MINING HOSE 14 BAR 56 BAR 32 PVC MINING HOSE 10 BAR 40 BAR 40 PVC MINING HOSE 8.8 BAR 35 BAR 50 PVC MINING HOSE 8.8 BAR 35 BAR 43 P a g e

DRAGLINE HOSE SANS 271-2005 MANUFACTURED IN SOUTH AFRICA Supplied in sizes 12.5, 20, & 25. SANS 271 available in black (Custom colours available on request).

44 DRAGLINE HOSE SANS MANUFACTURED IN SOUTH AFRICA Supplied in sizes 12.5, 20, & 25. SANS 271 available in black (Custom colours available on request). Supplied in a minimum of 100m lengths which can be cut into specific lengths Operating pressure: 9 bar. Temperature range: 0 C - 23 C. UV Resistant. Applications: Ideal for conveyance of water in domestic, agricultural and industrial sectors. Outer Layer Inner Layer Reinforcement PVC PVC Polyester 44 P a g e

45 PIPE OUTSIDE DIAMETER CHART 45 P a g e

46 46 P a g e

47 47 P a g e

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS