HEAVY DUTY KNIFE GATE VALVE. ANSI B16.5 (class 150) and DIN PN 10
|
|
|
- Hilary Singleton
- 5 years ago
- Views:
Transcription
1 HEAVY DUTY KNIFE GATE VALVE The SERIES knife gate is a uni-directional lug type valve designed according to the MSS-SP-1 and TAPPI TIS 405- standard for industrial service applications. The design of the valve allows for a tight shut off in services with solids in suspension in industries such as: Pulp and Paper Chemical Plants etc. Power Plants Waste Water Mining Food and Beverage Sizes: 2 to 24 (larger diameters on request) Working Pressure: 2 to 24 : 150 PSI Standard Flange Connection: ANSI B16.5 (class 150) and DIN PN 10 All valves are tested prior to shipping in accordance with the manufacturers specification developed by the Quality Control department at Orbinox. STANDARD PARTS LIST Part: Stainless Steel: 1- Body CFM 2- Gate AISI Seat 4- Packing Metal or Resilient (EPDM Std.) PTFE (NT) 5- Gland Follower CFM 6- Stem AISI Stem Nut Bronze - Yoke Carbon Steel (2 to 6 ) Cast Iron ( to 40 ) 9- Support plates Carbon Steel - Epoxy Coated 10- Handwheel Cast Iron (2 to 24 ) 11- Seat Retainer Ring AISI Thrust Washer Bronze 13- Stem Protector Carbon Steel - Epoxy Coated 14- Cap Plastic ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -1 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
2 DESIGN FEATURES BODY: One piece integrally cast stainless steel body with raised face flanges and reinforced body ribs in larger diameters for extra body strength. Internal cast gate wedges and guides allows for tighter shut off. Full port design according to MSS-SP-1 and TAPPI TIS Internal design reduces any build up of solids that could prevent valve from closing. GATE: Blade polished on both sides for a tighter seal in the packing chamber. Machined beveled gate end shears through solids for a tighter shut off. SEAT: Unique design that mechanically locks the seat inside the valve body with a stainless steel retainer ring. Standard EPDM seat; available in different materials such as Viton, PTFE, etc. PACKING CHAMBER: Standard braided PTFE impregnated fiber with EPDM O-ring for a tighter seal. Smooth chamber and cast gland follower with equally distributed gland bolts provides uniform compression of packing. STEM: Corrosion resistance stainless steel stem. Single pitch Acme thread reduces torque on handwheel operator and eliminates installation of a gear operator on larger diameters. Standard stem protector on all handwheel actuators gives additional protection against dust while the valve is in the open position. ACTUATORS: All Orbinox actuator models are supplied with a standard mounting kit to allow easy installation on site. YOKE & SUPPORT PLATES: EPOXY coated steel (stainless steel available on request). Compact design makes it extremely robust even in the most severe conditions. EPOXY COATING: The electrostatic applied epoxy coating on all ORBINOX cast iron and carbon steel valve bodies and components make the valves corrosion resistant. GATE SAFETY PROTECTION: Gate guards are available upon request for areas where safety is a concern. The design feature prevents any objects from getting caught accidentally while the gate is moving. ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -2 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
3 OTHER OPTIONS BONNET: Reduces risk of leakage to atmosphere where contamination of the environment is a concern. Leakproof stem seal can be easily re-packed in line. V-PORT: 60 degree and pentagonal port design. Selection depends on type of fluid control desired. BODY AND BONNET PURGE CONNECTIONS: Allows for cleaning of solids trapped within the body cavities that can obstruct the flow or prevent the valve from closing fully. Depending on the process, purging can be with air, steam, liquids, etc. OTHER MATERIALS OF CONSTRUCTION AVAILABLE: Special alloys such as AISI 317, 254SMO, Hastelloys, Titanium, etc. FABRICATED VALVES: Orbinox is equipped for in house fabrication of special valves. Design is based on application, diameter, pressure, material of construction, etc. SURFACE TREATMENTS Valve components can be protected or coated for a longer life expectancy, depending on the application and the service conditions. At Orbinox we can offer treatments and coatings for all valve components to improve the properties against abrasion (stellite, polyurethane ), corrosion (Halar, Rilsan, galvanized ) and adherence (polishing, PTFE ) ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -3 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
4 ACTUATOR OPTION Handwheel (rising or non-rising stem) Chainwheel Lever Bevel Gear Others (square nut ) Electric Double Acting Pneumatic Single Acting Pneumatic Hydraulic All actuators supplied by ORBINOX are interchangeable. FAIL SAFE SYSTEMS Used on pneumatic actuated valves. SINGLE ACTING / SPRING RETURN Available in sizes 2 to, larger on request. Supply Pressure: Options: Fail open Fail closed Minimum 75 PSI Maximum 100 PSI ACCESSORIES Mechanical Stops Locking Device Actuator Manual Override Solenoid Valves Positioners Limit Switches Electric Controls Floor Stands Stem Extensions SINGLE ACTING / VOLUME TANK Available in all sizes. Supply Minimum 50 PSI Pressure: Maximum 100 PSI Options: Pneumatic Fail safe Electro pneumatic Fail safe Wide range of valve extensions available. For further information about fail safe systems and valve extensions, please refer to SERIES 10 section For additional information, please consult the factory. ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -4 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
5 SEAT / SEALS PACKING Material Max.Temp.( o F) Applications Material Max.Temp.( o F) ph Metal/Metal 500 High temperature. Talowed cotton (AH) EPDM (E) Nitrile (N) Viton (V) More details and other materials on request. Acids and non mineral oils. Resistance to petroleum products. General chemical service. High temperature. Silicone (S) 40 Food service / High temperature. PTFE (T) 40 Corrosion resistance. Dry cotton (AS) PTFE impregn. Natural fibre (NT) PTFE impregn. Synth. Fibre (ST) Braided PTFE (TH) Graphite (AG) Ceramic fibre (FC) NOTE: Above includes an elastomer O-ring (same material as seal), excluding TH, AG and FC. SEAT TYPE A SEAT (metal / metal) High Temperature High Density Positive Shut Off TYPE A (resilient) standard Temperature limitations according to seat material selected. Consult the above chart or our technical department for more information. TYPE B SEAT (resilient) Temperature limitations according to seat material selected. Consult the above chart or our technical department for more information. Replaceable design without dismantling the valve. DEFLECTOR CONE Deflects the media away from any internal exposed parts of the valve such as gate guides, seat, etc Different types of material available such as AISI 316 stainless, CA15, Ni-Hard, etc... Face to face dimensions increase: Sizes 2 to 10 =.375 Sizes to 24 =.50 ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -5 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
6 HANDWHEEL (rising stem) Standard handwheel actuator. Options: - Chainwheel - Non-rising stem - Locking Device - Stem Extensions Valve sizes available in 2 to 24, larger on request. For other options and dimensions, please consult our technical department. SIZE A B C D E F OG H Weight (lbs) ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -6 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
7 GEAR Recommended for valves larger than 14 and working pressures greater than 50 PSI. Options: - Locking Device - Stem Extensions - Chainwheel - Non-rising Stem Valve sizes available in to 24. For other options and dimensions, please consult our technical department. SIZE A B C D E F OG H I ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -7 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
8 PNEUMATIC CYLINDER Standard pneumatic actuator: - Carbon steel construction - Stainless steel tie rods and nuts - Nitrile Seals Valve sizes available in 2 to 24, larger on request. Supply Pressure: minimum 40 PSI - maximum 150 PSI All valves installed in a horizontal position, pneumatic actuators must be supported. NOTE: Depending on the application and service conditions, Orbinox can supply larger bore size cylinders. The table below shows the most commonly used bore sizes. Please consult our technical department for maximum differential pressure and minimum air supply for all pneumatic operated knife gate valves. Instrumentation and options on request: For other options and dimensions, please consult our technical department. SIZE A B C D E F G H Weight (lbs) Standard Cyl. Connect Bore Bore Bore Bore Bore Bore Bore 3/ NPT Bore 3/ NPT Bore 3/ NPT Bore 3/ NPT Bore 1/2 NPT Bore 1/2 NPT Bore 1/2 NPT ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com - ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
9 ELECTRIC ACTUATOR Options: - Electric Motor - Rising Stem or Non-rising stem - Motor Support Yoke Flange (Acc. To ISO 5210 / DIN 333) The standard electric motor is equipped with: - Manual Emergency Operation - Limit Switches (open / close) - Torque Switches Valve sizes available in 2 to 24. Please consult our technical department for specifications and options on electric motors. SIZE A B C D E F OG H I J L M Stem0xpitch Torque(ft/lbs) x x x x x x x x x x x x x ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -9 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
10 FLANGE AND BOLTING DETAILS DIN PN10 DN K n o M T ANSI B16.5, class 150 DN K n o M T M-16 M-16 M-16 M-16 M-16 M- M- M- M- M- M-24 M-24 M-24 M-27,7,7,7 10, ,2 22, / /4 5 1/ /2 1/2 9 1/2 11 3/4 14 1/ /4 21 1/4 22 3/ / / UNC 5/ UNC 5/ UNC 5/ UNC 3/4 UNC 3/4 UNC 3/4 UNC 7/ UNC 7/ UNC 1 UNC 19/32 1 UNC 19/32 1 1/ UNC 19/32 1 1/ UNC 1 1/4 UNC 5/16 5/16 11/32 11/32 11/32 15/32 15/32 15/32 15/32 7/ 7/ ORBINOX SPAIN, Polig. Ind. Anoeta Apdo Tolosa, Spain Tel: Fax: orbinox@orbinox.com -10 ORBINOX CANADA, 50 Dagenais West, Laval, Quebec, H7L 5W2 Tel: Fax: orbe@orbevalve.com / ORBINOX USA, 311 North Front Street, Amory, Mississippi 321 Tel: Fax: orbe@orbevalve.com /
Valve Solutions for the Bulk Material Industry
Valve Solutions for the Bulk Material Industry SUCCESS STORY Plant name & location: Tronox, llc. Hamilton, Ms Application: Ore Silo Inlet Media: Titanium Rutile Ore Tronox, llc., formerly Kerr McGee Chemical
HEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
SQUARE PORT KNIFE GATE VALVE
SQUARE PORT KNIFE GATE VALVE The model knife gate is a square port low-pressure valve for highly solid loaded fluids or solids, mainly used in bulk handling and silo outlet applications in industries such
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
L15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
ROUND BY SQUARE PORT KNIFE GATE VALVE
ROUND BY SQUARE PORT KNIFE GATE VALVE The model knife gate is a wafer valve designed for handling difficult applications. This valve is suitable for using in recycling applications, like junk or sand traps
BI-DIRECTIONAL KNIFE GATE VALVE
BI-DIRECTIONAL KNIFE GATE VALVE The model knife gate is a bi-directional valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on suspended
DOUBLE GATE KNIFE GATE VALVE. OBX 09/09 8th EDITION Reserves the right to change specifications without notice
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate valve is a bi-directional valve widely used in the Pulp and Paper industry (paper recycling) and especially designed to handle high concentrated or contaminated
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional full flanged valve equipped with two metal reinforced rubber sleeves designed for use in the handling of abrasive slurries, mainly
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
KNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
KNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
UNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
UNIDIRECTIONAL Guillotine Valve
Unidirectional "LUG" guillotine valve. Monobloc cast body with interior slides for optimum movement of the gate during operation. Provides high flow rates with low pressure drop. Various seat and packing
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
BIDIRECTIONAL WAFER Knife Gate Valve
31/07/2014 BIDIRECTIONAL WAFER Knife Gate Valve - Bidirectional wafer-design knife gate valve. - One-piece cast body. - Provides high flow rates with low pressure drop. - Various seat and packing materials
UNIDIRECTIONAL Knife Gate Valve
UNIDIRECTIONAL Knife Gate Valve 24/04/2013 Unidirectional knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure drop. Various seat
BIDIRECTIONAL Knife Gate Valve
BIDIRECTIONAL Knife Gate Valve 30/10/2013 Bidirectional knife gate valve. Two piece cast body, joined by screws, with internal guides for smooth movement of gate during operation. Provides high flow rates
UNIDIRECTIONAL WAFER Knife Gate Valve
03/01/2011 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
UNIDIRECTIONAL WAFER Knife Gate Valve
29/01/2016 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
UNIDIRECTIONAL Gate Valve
23/04/2013 UNIDIRECTIONAL Gate Valve Unidirectional flanged gate valve (bidirectional option to order), designed for high pressure applications, with self cleaning seal. Single piece die cast body with
BIDIRECTIONAL WAFER Knife Gate Valve
09/03/2016 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
BIDIRECTIONAL WAFER Knife Gate Valve
05/10/2012 BIDIRECTIONAL WAFER Knife Gate Valve Bidirectional wafer design knife gate valve. Monoblock one piece cast iron body. Stainless steel gate. Two rubber sleeves. Provides high flow rates with
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
UNIDIRECTIONAL Knife Gate Valve
30/10/2013 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve, with wafer design and quick opening and closing. Body made up of two screwed down halves, with slides to provide smooth operation.
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-05 (Rev. 08/2015)
General Description The FKB Knife-gate valves model VGU-05 brings cost-effective solution to block the flow of abrasive fluids. These are strong equipments to be installed between flanges, which has Wafer
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-29 (Rev. 02/2016)
General Description The model FKB VGU-29 brings an economic solution to block abrasive and corrosive fluid sewage for granulometry until 5mm. They are light equipments, to be installed through flanges,
UNIDIRECTIONAL Round Guillotine Damper
28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance
FKB INDÚSTRIA DE EQUIPAMENTOS LTDA. KNIFE GATE VALVE VGU-01 (Rev. 02/2016)
General Description The model FKB VGU-01 is developed in accordance with MSS-SP 81 Standard and its function is blocking the fluid sewage. They are light equipments for semi-lug body and flange installation,
FABRICAST VALVE. Knife Gate Valves & Custom Fabrication Toll Free: Fax:
FABRICAST VALVE Knife Gate Valves & Custom Fabrication 360-425-0306 Toll Free: 1-877-264-2503 Fax: 360-425-0353 1061 Industrial Way Longview, WA 98632 FIG 40 The Fabricast FIG 40 is a metal seated, uni-directional
3 & 4 WAY DIVERTER VALVES DESIGN FEATURES
3 & 4 WAY DIVERTER VALVES The 3V and 4V models are diverter valves designed to handle solid loaded fluids. Mainly used for pulp stock in the Pulp and Paper industry. Sizes: 80 to 300 (larger diameters
UNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
Please note this is a condensed catalog. For a complete version, contact Velan directly.
STANDARD KNIFE GATE VALVE DESIGN FEATURES ADVANTAGES OVER FABRICATED VALVES Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
INSTALLATION, OPERATION & MAINTENANCE MANUAL Description Handling Installation Actuators...
INSTALLATION, OPERATION & MAINTENANCE MANUAL INDEX Page 0 - Description 2 1 - Handling 2 2 - Installation 2 3 - Actuators 5 4 - Maintenance 5 41 - Gland packing replacement 6 42 - Seal replacement 6 43
VELAN COMPANY PROFILE
Catalogs VELAN COMPANY PROFILE Velan is one of the world's leading manufacturers of industrial valves, supplying forged and cast steel gate, globe, check, ball, butterfly, knife gate and engineered severe
Knife gate valves for water, sludge and abrasive slurry
Knife gate valves for water, sludge and abrasive slurry The production of knife gate valves started in 1928 in close co-operation with customers... In order to guarantee valve function upon delivery the
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
Knife gate valve HG - Standard
Knife gate valve HG - Standard V R Data is only for informational purpose. All specifications are subject to change without notice. 1 Knife gate valve HG Stafsjö s knife gate valve HG has excellent flow
Shearseal Knife Gate Valves. Manufactured by TSE
Shearseal Knife Gate Valves Manufactured by TSE Shearseal Design Most knife gate valve manufacturers describe their valve as rugged and dependable. In the Shearseal Valve, these qualities are not idle
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Knife gate valves Index
Index General information page Introduction 144 Product information page ast Iron/SS; Uni-directional 146 ast Iron/SS; i-directional; Throught conduit 147 ast Iron/SS; i-directional 148 ast Iron/SS; Silo
INSTALLATION, OPERATION & MAINTENANCE MANUAL. 0.- Description Handling Installation Actuators Maintenance...
INSTALLATION, OPERATION & MAINTENANCE MANUAL INDEX Page 0- Description 2 1- Handling 2 2- Installation 2 3- Actuators 5 4- Maintenance 5 41- Gland packing replacement 5 42- Seal replacement 6 43- Gasket
Fabri-Valve. CF37 Heavy Duty Knife Gate Valve
Fabri-Valve CF37 Heavy Duty Knife Gate Valve CF37 Heavy Duty Knife Gate Valve Fabri-Valve Figures C37 and F37 are some of the most popular knife gate valve configurations. Figure C37 knife gate valves
HD150/HD300 Heavy Duty Knife Gate Valve
Fabri-Valve HD150/HD300 Heavy Duty Knife Gate Valve HEAVY DUTY VALVES FOR THE OIL SANDS INDUSTRY Heavy Duty Knife Gate Valve The HD150 and HD300 Heavy Duty Knife Gate Valve The Fabri-Valve HD line of Heavy
Fabri-Valve XS150. Knife Gate Valve
Fabri-Valve XS150 Knife Gate Valve XS150 XS150 High Performance Knife Gate Valve The Fabri-Valve XS150 High Performance Knife Gate valve features a robust perimeter seal that provides bi-directional bubble
ALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
INSTALLATION, OPERATION & MAINTENANCE MANUAL MODEL BC.
INSTALLATION, OPERATION & MAINTENANCE MANUAL MODEL ORBINOX SPAIN PolInd s/n-20270 ANOETA Tel:+34 943 698030 Fax:+34 943 653066 e-mail:orbinox@orbinoxcom ORBINOX CANADA, ORBINOX USA,, ORBINOX BRAZIL, ORBINOX
Size: 1/4 to 3. Material: 316 Stainless Steel, Carbon Steel,
Size: 1/4 to 4 Material: 316 Stainless Steel, Carbon Steel, Alloy 20, Hastelloy C, Monel, Brass, SW, BW, BSPT, 150#, 300#, 600#, Flanged Pressure: Vacuum to 3000 PSI* -50 to 600 F* ASME B16.34 Design Bottom
Data sheet Knife gate valve WB PN10 DN
Page: 1(7) Introduction The Stafsjö WB knife gate valve is a bi-directional seated valve with full bore. Its main applications are different liquids at water, waste water and biogas plants. The WB is designed
ORBINOX S.A. Pol. Ind. s/n ANOETA (Spain) Tel.: Fax:
GENERAL DESCRIPTION The ORBINOX model is a 4 sided sealing penstock. The gates are suitable for different types of applications with a highly versatile flow control for waste water treatment plants, irrigation,
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
BIDIRECCIONAL "WAFER" Type Kanife Gate Valve
BIDIRECCIONAL "WAFER" Type Kanife Gate Valve Bidirectional knife gate valve with "wafer" design. Two piece cast body, joined by screws, with internal guides for smooth movement of through conduit during
CLASS 400 FORGED BRASS BALL VALVE
CLASS 400 FORGED BRASS BALL VALVE FIG. 214 Screwed body cap, PTFE seats, Blowout-proof stem. Screwed ends to BS 21. Nickel plated body. Chrome plated ball. UNI-FLO NYLON BALL VALVES FIG. 214NS/NB Features:
INSTALLATION, OPERATION AND MAINTENANCE MANUAL OF KNIFE GATE DURGA VALVES PVT. LTD. ICHAPUR ROAD, CANAL SIDE, SANTRAGACHI, HOWRAH
INSTALLATION, OPERATION AND MAINTENANCE MANUAL OF KNIFE GATE DURGA VALVES PVT. LTD. ICHAPUR ROAD, CANAL SIDE, SANTRAGACHI, HOWRAH-711104 INTRODUCTION - The knife gate is a uni-directional lug type valve
COMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
DOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
E5700 E5500 E5000 HIGH PERFORMANCE KNIFE GATE VALVES
E5700 E5500 E5000 HIGH PERFORMANCE KNIFE GATE VALVES PROCESS OF DEVELOPMENT Elite Valve starts its casting process with wax moulds, which are used to produce high quality investment patterns. This process
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN MAY 2003
KGC CAST STAINLESS STEEL KNIFE GATE VALVES BULLETIN 35.00-1 MAY 2003 KGC CAST STAINLESS STEEL KNIFE GATE VALVES Design and Construction DeZURIK Cast Knife Gate Valves (KGC) are designed for on-off and
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
BALL VALVES BUTTERFLY VALVES GLOBE VALVES GATE VALVES CHECK VALVES KNIFE VALVES Y STRAINERS ACTUATION BALL VALVES SS2020N-300 2 PIECE FLANGED ANSI 300 BALL VALVE Firesafe Certified Full Bore TMF1600 seats
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS
AVK FLOW CONTROL OPTIMAL VALVE SOLUTIONS FOR OIL AND GAS PLANTS InterApp World Valve Wouter Witzel TEC artec AVK 1 2 AVK FLOW CONTROL l OIL & GAS PLANTS CONTENT: AVK FLOW CONTROL 4-5 OFFSHORE PRODUCTION
S-GATE type KNIFE VALVE with PNEUMATIC ACTUATOR. DN 450 to 600. See below. 5 bar min. / 7 bar max. Prohibited use on gases of group 1 for DN>100
CHARACTERISTICS The S-GATE knife valve is equipped with a pneumatic actuator and is dedicated to the automatic shut-off of loaded fluids such as slurries and powdery materials. The standard application
Fabri-Valve. C67 Bi-Directional Knife Gate Valve
Fabri-Valve C67 Bi-Directional Knife Gate Valve C67 Bi-Directional Knife Gate Valve The Fabri-Valve Figure C67 features a unique, patented*, perimeter seal that provides bi-directional shutoff. The seal
Keystone Figure 990 and 920 Resilient Seated Butterfly Valves
A split body thin disc valve for high flow and modulating service Figure 990 - Wafer body design Figure 920 - Lugged body design Features General application Figure 990 and 920 valves are used when modulating
Application. 1. Design Features. Pulp and Paper/Waste Water Treatment/ Food and Beverage/Chemical Plants/ Power Plants/ Steel Industry/Etc.
VQF Series V-port Segment Ball Valve (Flange) ISO9001 & CE Accredited Overview The Hiton VQF series v-port segment ball valve is primarily designed for flow control, and it can also be used for shut-off
Manual valves. automatic meters and valves
Manual valves automatic meters and valves Butterfly valves manual valves Advanced technical design 1. Robust and lightweight leverage system. Ergonomic design. Protection of gear mechanism.. Flange fitting
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class Fk 41.51(15)GB 03.10
NAF-Setball ball sector valves DN -0, PN 0-, ANSI Class 0-0 Fk 4.()GB 03.0 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or metal-to-ptfe seating. The NAF-Setball combines
Hattersley Newman Hender Ltd
Product Guide Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper
Valves of stainless steel COMPACT-Program C D
SUT-O Valves VALVES STAINLESS STEEL CNA 50 1000 mm Shut-Off-Valves GO WIT OUR LOW Valves CNA 50 1000 mm MARTIN LOSE Gmb Unteres Paradies 63 D-89522 eidenheim Postfach 1565 D-89505 eidenheim server.ab@lohse-gmbh.de
NAF-Setball ball sector valves for MC-pulp DN , PN 16-40, ANSI Class
NAF-Setball ball sector valves for MC-pulp DN 80-300, PN 16-40, ANSI Class 150-300 Fk 41.54(2)GB 11.02 Primary characteristics NAF-Setball for MC-pulp is a ball sector valve with metalto-metal seating
Butterfly Valves. Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: Tel: Fax:
Butterfly Valves Jenkins Valves 254 Henry Street Brantford, Ontario N3T 5T7 Tel: 519-759-3911 Tel: 800-563-6302 Fax: 519-759-7970 www.craneenergy.com A Crane Co. Company Butterfly Valves Ordering Information
BI-ECCENTRIC Disc Retention Valve
05/11/2015 - Oscillating disc retention valve with dual eccentricity and straight seat. - Option of manufacturing WAFER type or with flange boring in accordance with customer requirements. - Distance between
Technical changes kept in reserve INSTALLATION, OPERATION & MAINTENANCE MANUAL. 0.- Description Handling Installation...
INSTALLATION, OPERATION & MAINTENANCE MANUAL INDEX Page 0.- Description...... 2 1.- Handling...... 2 2.- Installation...... 2 3.- Actuators...... 5 4.- Maintenance...... 6 4.1.- Gland packing replacement....
Knife gate valve SLF. Data is only for informational purpose. All specifications are subject to change without notice issue 3
Knife gate valve SLF Data is only for informational purpose. All specifications are subject to change without notice. V R 1 2013-02-15 issue 3 Knife gate valve SLF Stafsjö s knife gate valve SLF is a flanged
Not just your standard valve supplier but custom valve solutions for your most severe applications.
Not just your standard valve supplier......but custom valve solutions for your most severe applications. Superior products and unparalleled solutions. Uni-Directional Knife Gate (Resilient Seat Optional)
WEDGE & SLAB GATE VALVES
GW & GS Series GATE VALVES WEDGE & SLAB GATE VALVES PROCESS VALVES WEDGE GATE AND SLAB GATE VALVES FOR SPECIAL APPLICATIONS Wedge gate Valves Code: GW2M Hand wheel for small sizes Large size valves have
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
C OMPANY INSIGHTS B ALL L V VALVES. Series E1500. Series E3100. Series E3200 Excaliber. Series E9100. Series E9200. Our Vision.
B ALL L V VALVES Series E1500 Size 1/4 to 3 316 Stainless steel body & ball Full port Body rating 1000 WOG RPTFE seats standard (other avaliable) Teflon packing Safety Locking Leaver Series E3200 Excaliber