Parts Manual 400A. Band Sawing Machine
|
|
- Carmel Owens
- 5 years ago
- Views:
Transcription
1 Parts Manual 400A Serial No: to Band Sawing Machine
2 MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning your machine in the spaces provided above. This information is printed on a label or stamped on a plate attached to the machine frame. Always specify model and serial numbers on all parts orders and correspondence concerning your machine. This will help avoid unnecessary delays and inconvenience during processing. The specifications contained herein were in effect at the time this manual was approved for printing. The DoALL Company, whose policy is one of continuous product improvement, reserves the right to change specifications or design at any time without notice and without incurring obligations. How to read your serial number: For Sales, Parts and Service, call DoALL SAWING PRODUCTS 2375B TOUHY AVENUE ELK GROVE, ILLINOIS U.S.A. YOUR SERVICE REPRESENTATIVE:
3 PARTS MANUAL INDEX 6/14 FICHE NO. E-142 MODEL 400A SERIAL NO to _ PAGE NO. DESCRIPTION FIRST SERIAL LAST SERIAL PAGES PS Final Assembly All 2-3 PS-5-88 Adjusting Screw Assembly (Saw Guides) All PS *Band Broken Switch Option All PS Band Brush Assembly All 4-5 PS Band Tension Handwheel Assembly All PS Bandwheel Assemblies All PS Band Wiper Assembly All PS Control Panel (Pneumatic) All PS *Conveyor Assemblies (5 and 10 ) All 6-7 PS Counterbalance Spring Assembly All 8-9 PS Discharge Chute All 2-3 PS Door Latches All 2-3 PS Drive Assembly All PS Drive Roller Vise Jaw Assembly All PS Electrical Assembly to PS Electrical Assembly to PS Electrical Control Box Assembly All PS-6-78 Flood Coolant Assembly (Includes Flushing Hose) All PS-6-80 *Flood Coolant Assembly (Europa Only) All PS Head Assembly All PS Head Feed Control Assembly All PS Head Feed Cylinder Assembly All PS Head Pivot Detail All PS Hydraulic Controls All PS Job Selector All 2-3 PS *Laser Line Generator Assembly All PS Miscellaneous Details All PS-6-79 *Mist Lubricator Assembly All PS Movable Roller Vise Jaw Assembly All PS Pneumatic Details All PS Pneumatic Head Lift Assembly All PS *Pneumatic Vise Assembly All PS-5-88 Saw Guide Arm Assembly All PS *Vertical Guide Roller Assembly (Conveyor) All 6-7 PS Vise Detail All PS Vise Clamp Handwheel Assembly All PS Work Height Assembly All PS *Worklight to PS *Worklight to PS Workstop Assembly All *Denotes Attachment or Optional Equipment. 1
4 NEW DRG. S.C.L REVISIONS S.C.L A See Head Pivot Detail MODEL FIRST MACH. LAST MACH. 400A FINAL ASSEMBLY PS PRINTED IN U.S.A. 2
5 CODE NO. PS FINAL ASSEMBLY Ref Final Assembly L.H. Blade Guard Weldment Screw, Button Hd. Soc. M5-0.8 x Washer, Flat #10 S.A.E. Std Shield Screw, Button Hd. Soc. M5-0.8 x Washer, Flat #10 S.A.E. Std Nut, Hex. Self-Locking M Decal (400A) Label (DoALL) L.H. Door Weldment Self Drilling Fastener M4.8 x Nylon Edging... A.R Door Stop Screw, Button Hd. Soc. M6-1.0 x Locknut M Washer, Flat M Spring Latch (Each Door) Screw, Button Hd. Soc. M5-0.8 x Pull Pocket Band Cover Weldment (Standard) Band Cover Weldment (Mist Lubricator Option) Screw, Button Hd. Soc. M5-0.8 x Nut, Hex. Jam M Work Height Assembly (See Detail) Drive Assembly (See Detail) Band Wiper Assembly (See Detail) Screw, Button Hd. Soc. M5-0.8 x Bearing Cover Screw, Button Hd. Soc. M5-0.8 x Saw Band Selector R.H. Door Weldment Self Drilling Fastener M4.8 x Nylon Edging... A.R Escutcheon (Warning) Label (Diameters/X-Section Area) Pneumatc Head Lift Assembly (See Detail) Front Spalsh Guard Weldment Workstop Assembly (See Detail) Flood Coolant Assembly (See Detail) Mist Lubricator Assembly (Optional) (See Detail) Flood Coolant/Mist Lubricator Assembly (Optional) (See Detail) Foot Casting Screw, Hex. Hd. Cap M x Nut, Hex. Jam M Screw, Button Hd. Soc. M5 x 0.8 x Washer, Flat #10 Std. S.A.E Spring Ejector & Tag Assembly Spring Ejector Instruction Tag Screw, Button Hd. Soc. M5-0.8 x Cable Tie Mount Screw, Rd. Hd. Drive #4 x 1/ Base Weldment Discharge Chute Weldmwent Saw Band (Imperial Bi-Metal Super Silencer) Saw Band Tag Pin Retaining Ring Head Feed Control Assembly (See Detail) Pin Retaining Ring Vise Detail (See Detail) Label (Machine Data) Head Assembly (See Detail) Decal (American Flag) Escutcheon (Band Tension) R.H. Band Guard Screw, Button Hd. Soc. M5-0.8 x Bracket Screw, Hex. Hd. Cap M x Washer, Lock M Counterbalance Spring Assembly (See Detail)... 1 Following Not Shown: Instruction Tag CE Label (Europa Only) Shipping Pallet and Hardware Shipping Bracket Documentation CD Box of Extra Parts Hex. Key (10 mm) Screw, Button Hd. Soc. M6-1.0 x 12 (For Wear Plate When Shipping Bracket is Removed)
6 4
7 CODE NO. PS BAND BRUSH ASSEMBLY Ref Band Brush Assembly (Powered) Nut, Hex. M Washer, Flat M6 Wrought Bracket Weldment Screw, Button Hd. Soc. M6-1.0 x Washer, Lock M Band Brush Assembly (See Detail)... 1 Ref Band Brush Assembly Shaft Bracket Weldment Retaining Ring Spacer (.0149)... A.R Spacer (.0299)... A.R Wire Brush Nut, Hex. Jam M Bearing Retaining RIng If Supplied) Pinion Spring Pin
8 6
9 CONVEYOR ASSEMBLY (And Related Items) CODE NO. PS Ref ' Conveyor Assembly Roller Label (DoALL Logo) Label (Conveyor Capacity) Frame Weldment Screw, Hex. Hd. Cap M x Nut, Hex. M Screw, Hex. Hd. Cap M x Washer, Flat M12 Wrought Washer, Lock M Nut, Hex. M Foot Weldment... 4 Ref ' Conveyor Assembly Roller Label (DoALL Logo) Label (Conveyor Capacity) Frame Weldment Screw, Hex. Hd. Cap M x Nut, Hex. M Screw, Hex. Hd. Cap M x Washer, Flat M12 Wrought Washer, Lock M Nut, Hex. M Foot Weldment... 6 Optional Filler Plates (Not Shown): Filler Plate (6.97 Long) (Optional) Filler Plate (9.25 Long) (Optional)... A.R. Ref Vertical Guide Roller Assembly Screw, Hex. Hd. Cap M x Roller End Bearing Roller Roller Shaft Clevis Pin Washer Square Nut M Screw, Hex. Hd. Cap M x Washer, Lock M Washer, Flat M Nut, Hex. M Base Weldment
10 NEW DRG. S.C.L REVISIONS MODEL 400S SHOWN. MODEL FIRST MACH. LAST MACH. 400A M S COUNTERBALANCE SPRING ASSEMBLY PS PRINTED IN U.S.A.
11 CODE NO. PS COUNTERBALANCE SPRING ASSEMBLY Ref Counterbalance Spring Assembly Retaining Ring * Clevis * Shaft Collar Top Washer Rod Guide Weldment Pin Retaining Ring Screw, Hex. Hd. Cap M x Washer, Lock M Washer, Flat M Bracket Compression Spring * Threaded Rod 3/4-10NC x 13-1/ * Nut, Hex. Jam 3/4-10NC * Spring Pin... 1 *NOTE: Marked Items are Part of Assembly # Screw and Lug Assembly. 9
12 NEW DRG. S.C.L REVISIONS MODEL FIRST MACH. LAST MACH. 400A DRIVE ASSEMBLY PS PRINTED IN U.S.A.
13 CODE NO. PS DRIVE ASSEMBLY Ref Drive Assembly Electric Motor Electric Motor (575V Only) Cover Mounting Plate Screw, Button Hd. Soc. M6-1.0 x Motor Mount Weldment Screw, Hex. Hd. Cap M x Washer, Lock M Washer, Flat M8 Wrought Motor Pulley V-Belt Cover Weldment Screw, Button Hd. Soc. M5-0.8 x Key Spindle Pulley
14 NEW DRG. S.C.L REVISIONS MODEL FIRST MACH. LAST MACH. 400A DRIVE ROLLER VISE JAW ASSEMBLY PS PRINTED IN U.S.A.
15 CODE NO. PS DRIVE ROLLER VISE JAW ASSEMBLY Ref Drive Roller Vise Jaw Assembly (Standard Rollers) Ref Drive Roller Vise Jaw Assembly (Optional Knurled Rollers) Rear Chain Cover Screw, Button Hd. Soc. M5-0.8 x Compression Spring Screw, Soc. Hd. Cap M6-1.0 x Nut, hex. M Screw, Soc. Set M x Nut, Hex. Jam M Dowel Pin Screw, Soc. Hd. Cap M x Washer, Lock M12 Hi-Collar Actuator Weldment Actuator Mounting Bracket Screw, Soc. Hd. Cap M6-1.0 x Roller Assembly (Weldment) Shaft Retaining Ring Gear Motor (208V, 230V, 460V, 575V) Gear Motor (200V) Gear Motor (400V) Screw, Soc. Hd. Cap 7/16-14NC x 1-3/ Washer, Flat 7/16 S.A.E. Std Washer, Lock 7/16 Std Nut, Hex. 7/16-14NC Top Chain Cover Screw, Button Hd. Soc. M5-0.8 x Sprocket Spring Pin Key Roller Chain Sprocket Spring Pin Key Roller Chain Sprocket Spring Pin Key DU Sleeve Bearing Spacer Roller (Standard) Roller (Optional Knurled) Screw, Button Hd. Soc. M4-0.7 x Shim (.003)... A.R Shim (.010)... A.R Shim (.015)... A.R Bearing Block Screw, Soc. Hd. Cap M x Roller And Gear Motor Housing Roller Chain Sprocket Spring Pin Loctite (Dry-Loc Green 202)... A.R Chain Cover Weldment Screw, Button Hd. Soc. M5-0.8 x
16 NEW DRG. S.C.L REVISIONS S.C.L Band Broken Switch Option MODEL FIRST MACH. LAST MACH. 400A ELECTRICAL ASSEMBLY PS PRINTED IN U.S.A.
17 CODE NO. PS ELECTRICAL ASSEMBLY Ref. Electrical Assembly Limit Switch (Door Interlock) Screw, Button Hd. Soc. M4-0.7 x Cord Grip Connector ( ) Electrical Cord (#18-2 Conductor)... A.R Interlock Key Bracket Screw, Button Hd. Soc. M4-0.7 x Nut, Hex. M Washer, Flat M4... A.R Rubber Grommet Cord Grip Connector Flange Washer Bond Nut Label (Electrical Hazard) Electrical Cord (#14-4 Conductor)... A.R Electrical Cord (#14-3 Conductor) (Single Phase Motors Only)... A.R Proximity Switch (Out of Stock) Bracket Screw, Button Hd. Soc. M4-0.7 x Proximity Switch (Stock Forward) Bracket Screw, Button Hd. Soc. M4-0.7 x Nylon Clamp Screw, Button Hd. Soc. M4-0.7 x Proximity Switch (Head Down) Bracket Screw, Button Hd. Soc. M5-0.8 x Label (Electrical Hazard) Cord Grip Connector Flange Washer Bond Nut Electrical Cord (#14-4 Conductor)... A.R Bracket Screw, Button Hd. Soc. M5-0.8 x Proximity Switch (Head Up) Solenoid DIN Connector Electrical Cord (#18-3 Conductor)... A.R Wire Wrap (1" Black Poly)... A.R. 37. Electrical Control Box Assembly (See Detail) Screw, Soc. Hd. Cap M x Washer, Lock M Knob w/stud Brass Plug Shaft Collar Console Post Weldment Programmed Operator Workstation Communication Cable (#1) Pushbutton Operator (Red Mushroom Head) Contact Block (2-NC) E-Stop Marker (Yellow) Screw, Hex. Hd. Slotted M6-1.0 x Nylon Washer Rivet Nut M Retainer Ring Enclosure Weldment Nut, Hex. 5/16-18NC Washer, Flat 5/16 S.A.E. Std Washer, Lock 5/16 Std Sealtite Connector Flanged Washer Plastic Insulated Bushing Sealtite Conduit 1/2 I.D.... A.R Sealtite Connector Flanged Washer Plastic Insulated Bushing Sealtite Conduit 3/4 I.D.... A.R. Following Not Shown: Worklamp (Optional) Nut, Hex. Self-Locking 3/8-16NC... 1 Ref. Band Broken Switch Option Proximity Switch (Band Broken) Mounting Bracket Screw, Button Hd. Soc. M5-0.8 x
18 NEW DRG. S.C.L REVISIONS Band Broken Switch Option MODEL FIRST MACH. LAST MACH. 400A ELECTRICAL ASSEMBLY PS PRINTED IN U.S.A.
19 CODE NO. PS ELECTRICAL ASSEMBLY Ref. Electrical Assembly Limit Switch (Door Interlock) Screw, Button Hd. Soc. M4-0.7 x Cord Grip Connector ( ) Electrical Cord (#18-2 Conductor)... A.R Interlock Key Bracket Screw, Button Hd. Soc. M4-0.7 x Nut, Hex. M Washer, Flat M4... A.R Rubber Grommet Cord Grip Connector Flange Washer Bond Nut Label (Electrical Hazard) Electrical Cord (#14-4 Conductor)... A.R Electrical Cord (#14-3 Conductor) (Single Phase Motors Only)... A.R Proximity Switch (Out of Stock) Bracket Screw, Button Hd. Soc. M4-0.7 x Proximity Switch (Stock Forward) Bracket Screw, Button Hd. Soc. M4-0.7 x Nylon Clamp Screw, Button Hd. Soc. M4-0.7 x Proximity Switch (Head Down) Bracket Screw, Button Hd. Soc. M5-0.8 x Label (Electrical Hazard) Cord Grip Connector Flange Washer Bond Nut Electrical Cord (#14-4 Conductor)... A.R Bracket Screw, Button Hd. Soc. M5-0.8 x Proximity Switch (Head Up) Solenoid DIN Connector Electrical Cord (#18-3 Conductor)... A.R Wire Wrap (1" Black Poly)... A.R. 37. Electrical Control Box Assembly (See Detail) Screw, Soc. Hd. Cap M x Washer, Lock M Back Cover Screw, Button Hd. Soc. M6-1.0 x Consolet Weldment Programmed Operator Workstation Ethernet Cable (#1) D-Sub Connector Plug (25 Pin) Pushbutton Operator (Red Mushroom Head) Contact Block (2-NC) E-Stop Marker (Yellow) Screw, Hex. Hd. Slotted M6-1.0 x Nylon Washer Rivet Nut M Retainer Ring Enclosure Weldment Nut, Hex. 5/16-18NC Washer, Flat 5/16 S.A.E. Std Washer, Lock 5/16 Std Sealtite Connector Flanged Washer Plastic Insulated Bushing Sealtite Conduit 3/4 I.D.... A.R. Following Not Shown: Worklamp (Optional) Nut, Hex. Self-Locking 3/8-16NC... 1 Ref. Band Broken Switch Option Proximity Switch (Band Broken) Mounting Bracket Screw, Button Hd. Soc. M5-0.8 x
20 NEW DRG. S.C.L REVISIONS S.C.L LAYOUT MAY VARY! CHECK YOUR ELECTRICAL SCHEMATIC MODEL FIRST MACH. LAST MACH. 400A ELECTRICAL CONTROL BOX ASSEMBLY PS PRINTED IN U.S.A.
21 CODE NO. PS ELECTRICAL CONTROL BOX ASSEMBLY Ref. Electrical Control Box Assembly Transformer (208V) Transformer (230V, 460V, 575V) Transformer (400V) Variable Frequency Drive Module (208V, 230V, 575V) Variable Frequency Drive Module (400V, 460V) Disconnect Switch Disconnect Switch Shaft Enclosure Panel Nut, hex. 3/8-16NC Washer, Lock 3/8 Std Grounding Bus Wire Terminal Lug Motor Starter Protector (50 Hz Only) Circuit Breaker (208V, 230V, 575V) Circuit Breaker (400V) Circuit Breaker (460V) Circuit Breaker (208V) Circuit Breaker (230V, 575V) Circuit Breaker (400V) Circuit Breaker (460V) Mounting Channel... A.R End Stop Terminal Block (575V Only) End Stop (575V Only) End Section (575V Only) Terminal Block (Yellow) Terminal Block End Section Jumper Bar Terminal Marker Set Screw, Hex. hd. Slotted M6-1.0 x Nylon Washer Retaining Ring Nut Rivet M Terminal Block (Blue) End Section Fan Cover Power Supply Contactor (50 Hz Only) Contactor Control Relay Circuit Breaker Circuit Breaker Hole Seal Sealtite Connector (If Supplied) Flanged Washer (If Supplied) Plastic Insulated Bushing (If Supplied) Sealtite Conduit 1/2 I.D. (If Supplied).. A.R Hole Seal Cord Grip Connector ( ) (Worklight Option) Hole Seal Cord Grip Connector ( ) (Band Broken Switch Option) Sealtite Connector (575V Only) Flanged Washer (575V Only) Plastic Insulated Bushing (575V Only) Sealtite Conduit 1/2 I.D. (575V Only)... A.R Cord Grip Connector ( ) Electrical Cord (#14-4 Conductor)... A.R Cord Grip Connector (2 Hole Insert) Cord Grip Connector ( ) Electrical Cord (#14-4 Conductor)... A.R Cord Grip Connector (3 Hole Insert) Cord Grip Connector ( ) Cord Grip Connector ( ) (50 Hz Only) Electrical Cord (#18-2 Conductor)... A.R Electrical Cord (#14-4 Conductor) (50 Hz Only)... A.R Wire Terminal Ring #10 (50 Hz Only) Hole Seal Cord Grip Connector ( ) (Mist Lubricator Option) Sealtite Connector Flanged Washer Plastic Insulated Bushing Sealtite Conduit 3/4 I.D.... A.R Disconnect Switch Handle Mounting Channel... A.R End Stop " Wiring Channel... A.R " Wiring Channel Cover... A.R. 65* Ethernet Cable (#1) * D-Sub Connector Plug (25 Pin) Programmed PLC Unit Cable (#2) Motor Starter Protector (208V, 230V, 575V) Motor Starter Protector (400V) Motor Starter Protector (460V) Auxiliary Contact (1-NC) Axial Fan Fan Cover Fan Lead Wire * Enclosure Weldment Gasket Strip... A.R. Following Not Shown: CB and MSP Schedule UL/cUL Label Wire Terminal Ring # Wire Terminal Locking Fork # Wire, #14 Black (19 Strand)... A.R Wire, #14 Green/Yellow (19 Strand)... A.R Wire, #16 Red (19 Strand)... A.R Wire, #16 White (19 Strand)... A.R Wire, #16 Green/Yellow (19 Strand)... A.R Wire, #18 Blue (16 Strand)... A.R Step-Down Transformer (575V Only) Sealtite Connector (575V Only) Flanged Washer (575V Only) Plastic Insulated Bushing (575V Only) Sealtite Conduit 1/2 I.D. (575V Only)... A.R. *NOTE: Before Serial # : Communication Cable (#1) Enclosure Weldment
22 NEW DRG. S.C.L REVISIONS See Below Left FLUSHING HOSE ASSEMBLY (OPTIONAL - 400M, 400S; STANDARD - 400A) 1 COOLANT RESERVOIR ASSEMBLY FLOOD COOLANT ASSEMBLY MODEL FIRST MACH. LAST MACH. 400A M S PS PRINTED IN U.S.A.
23 CODE NO. PS-6-78 FLOOD COOLANT ASSEMBLY Ref Flood Coolant Assembly Barbed Insert Plastic Tubing 1/4 I.D. (Clear)... A.R Tubing Clamp... A.R Screw, Button Hd. Soc.M5-0.8 x A.R Coolant Reservoir Assembly (See Detail) Barbed Insert Pipe Coupling (Brass) Coolant Pump (110/120V, 50/60 Hz) Coolant Pump (220/240V, 50/60 Hz) Coolant Pump (CSA Approved) * Service Tee (Brass) * Barbed Insert * Hose Clamp * Neoprene Hose 11/16 O.D. (Black)... A.R. 13* Barbed Insert (Plastic) * Hose Clamp * Hoze Nozzle Street Elbow (Brass) Valve... 1 *NOTE: Part of Flushing Hose Assembly - # (Optional 400M, 400S; Standard 400A) Ref Coolant Reservoir Assembly Chip Container Screen/Filter Cover Screen/Filter Coolant Reservoir... 1 Following Not Shown: Cutting Fluid (Power-Cut Concetrate; 1 Quart)
24 NEW DRG. S.C.L REVISIONS To Saw Guide Flushing Hose FLOOD COOLANT ASSEMBLY (EUROPA ONLY) MODEL FIRST MACH. LAST MACH. 400A M S PS PRINTED IN U.S.A.
25 CODE NO. PS-6-80 FLOOD COOLANT ASSEMBLY (Europa Only) Ref Flood Coolant Assembly (Europa Only) Barbed Insert Hose Clamp Plastic Tubing 1/4 I.D. (Clear-Reinforced)... A.R Tubing Clamp... A.R Screw, Button Hd. Soc.M5-0.8 x A.R. 6* Hook * Neoprene Hose 11/16 O.D. (Black)... A.R Pump Mounting Plate Coolant Reservoir Plastic Tubing 1/4 I.D. (Clear-Reinforced)... A.R. 11* Hoze Nozzle * Barbed Insert (Plastic) * Hose Clamp Chip Container Weldment Screen/Filter Cover Screen/Filter Coolant Pump (50 Hz) Street Elbow (Brass) Shut-Off Valve Barbed Insert Hose Clamp Service Tee Reducer Bushing Reducer Bushing Barbed Insert Hose Clamp Screw, Soc. Hd. Cap M6-1.0 x Washer, Lock M Washer, Flat M Nut, Hex. M *NOTE: Part of Optional Flushing Hose Assembly - # Following Not Shown: Cutting Fluid (Power-Cut Concentrate; 1 Quart)
26 NEW DRG. S.C.L REVISIONS S.C.L On Some Machines MODEL FIRST MACH. LAST MACH. 400A M S HEAD ASSEMBLY PS PRINTED IN U.S.A.
27 HEAD ASSEMBLY CODE NO. PS Ref. Head Assembly Screw, Soc. Hd. Cap M x Washer, Lock M Nut, Hex. Jam 3/4-16NF Adjusting Screw 3/4-16NF x 2-5/16 (.42 Dia.) Thrust Ball Bearing Band Tension Handle Assembly Handle Bandwheel Screw Spring Pin Washer Rubber Bushing Head Slide and Shaft Sub-Assembly Idler Shaft Screw, Soc. Set M x 16 (Cone Point) Loctite Adhesive (#242)... A.R Head Casting Screw, Hex. Hd. Cap M x Nut, Hex. M Retaining Ring Head Weldment Screw, Soc. Set M x 25 (Flat Point) Saw Guide Arm Assembly (See Detail) Screw, Soc. Hd. Cap M x Bandwheel Assembly (Driver) Bandwheel (Driver) Ball Bearing Shim (.010)... A.R Shim (.020)... A.R Flange Bearing Screw, Hex. Hd. Cap M x Washer, Lock M Nut, Hex. M8 x Washer, Flat M Pinion Gear Retaining Ring Pinion Shaft Key Door Support Screw, Button Hd. Soc. M6-1.0 x Drive Shaft Screw, Soc. Set M x 12 (Cone Point) Retaining Ring Band Brush Assembly (Powered) (See Detail) Bar Screw, Soc. Hd. Cap M5-0.8 x Bandwheel Assembly (Idler) Bandwheel (Idler) Ball Bearing Shim (.010)... A.R Shim (.020)... A.R Compression Spring Tube Washer, Flat 3/4 Wrought
28 NEW DRG. S.C.L REVISIONS MODEL FIRST MACH. LAST MACH. 400A HEAD FEED CONTROL ASSEMBLY PS PRINTED IN U.S.A.
29 CODE NO. PS HEAD FEED CONTROL ASSEMBLY Ref Head Feed Control Assembly Male Elbow (Brass) Needle Valve Nut, Hex. Jam 1/2-20NF Street Elbow Close Nipple Solenoid Valve (2-Way) Male Connector (Brass) Nylon Tubing 1/4 O.D.... A.R Male Elbow (Brass) Head Feed Cylinder Assembly (See Detail) Male Elbow (Brass)... 1 Following Not Shown: Transmission Fluid (ATF)... A.R. 27
30 28
31 CODE NO. PS HEAD FEED CYLINDER ASSEMBLY Ref Head Feed Cylinder Assembly Lug Nut, Hex. Jam 7/16-14NC Pipe Plug Quad Ring Close Nipple Cylinder Spacer Locknut 3/8-16NC Washer, Flat 3/8 Wrought Pipe Plug Tie Rod End Cap O-Ring Piston Seal Cup Piston Adhesive Sealant (Loctite # Threadlok)... A.R Rod O-Ring End Cap Nut, Hex. 1/4-20NC Washer, Lock 1/4 Std
32 NEW DRG. S.C.L REVISIONS HEAD PIVOT DETAIL BAND WIPER ASSEMBLY DISCHARGE TRAY ASSEMBLY (LARGE) (OPTIONAL) (400S, 400M Only) 6 7 LASER LINE GENERATOR ASSEMBLY (OPTIONAL) MODEL FIRST MACH. LAST MACH. 400A M S MISCELLANEOUS DETAILS PS PRINTED IN U.S.A.
33 CODE NO. PS MISCELLANEOUS DETAILS Ref. Final Assembly (Head Pivot Detail) Screw, Soc. Set M x 12 (Cone Point) Screw, Soc. Hd. Cap M x Shaft Collar Pivot Shaft Thrust Bearing (Bronze) Bearing Block Sleeve Bearing (Press Fit) Shim (.003)... A.R Shim (.005)... A.R Shim (.007)... A.R Shim (.0478)... A.R Screw, Soc. Set M x Ref Band Wiper Assembly Bracket Screw, Pan Hd. Slotted M4-0.7 x Support Wiper... 2 Ref Discharge Tray Assembly (Large) (Optional) (400S, 400M Only) Screw, Soc. Hd. Cap M x Nut, Hex. Jam M Discharge Tray Weldment... 1 Ref M Laser Line Generator Assembly (Optional) Label (Laser - Warning) Laser Line Generator Screw, Soc. Set M5-0.8 x Laser Clamp Block Screw, Soc. Hd. Cap M5-0.8 x Laser Mounting Bracket Screw, Soc. Hd. Cap M5-0.8 x
34 NEW DRG. S.C.L REVISIONS To Air Supply - See Pneumatic Detail MODEL FIRST MACH. LAST MACH. 400A M S MIST LUBRICATOR ASSEMBLY PS PRINTED IN U.S.A.
35 CODE NO. PS-6-79 MIST LUBRICATOR ASSEMBLY Ref Mist Lubricator Assembly Screw, Button Hd. Soc. M5-0.8 x Washer, Lock M Nut, Hex. M Swivel Male Elbow Clip Half Screw, Button Hd. Soc. M5-0.8 x Screw, Soc. Hd. Cap M6-1.0 x Nut, Hex. M Mist Lubricator (Includes Nozzle, Solenoid Valve, Tubing) Reducer Bushing Swivel Male Elbow Polyethelene Tubing 1/4 O.D. (Blue)... A.R Bracket Screw, Button Hd. Soc. M6-1.0 x Nozzle Bracket Screw, Button Hd. Soc. M5-0.8 x Following Not Shown: Heavy Duty Cutting Fluid (AL-2000)... A.R. 33
36 NEW DRG. S.C.L REVISIONS Incoming Air Supply Pneumatic Vise Option VARIABLE VISE PRESSURE (Pneumatic Vise Option) Some of these parts may not apply to your machine. MODEL FIRST MACH. LAST MACH. 400A PNEUMATIC DETAIL PS PRINTED IN U.S.A.
37 CODE NO. PS PNEUMATIC DETAIL Ref. Pneumatic Detail Polyethelene Tubing 1/4 O.D. (Blue)... A.R Swivel Male Elbow Street Tee Mounting Nut Air Regulator/Filter Pipe Nipple (Brass) Polyethelene Tubing 1/4 O.D. (Blue)... A.R Swivel Male Elbow Solenoid Valve (3-Way) Regulator Mounting Bracket Screw, Button Hd. Soc. M6-1.0 x Gauge Reducer Bushing Mounting Nut Air Regulator/Filter Gauge Regulator Mounting Bracket Screw, Button Hd. Soc. M6-1.0 x Swivel Male Elbow Polyethelene Tubing 1/4 O.D. (Blue)... A.R Control Panel Pneumatic Valve (4-Way with Pushbutton) Vent Filter Breather Swivel Male Elbow Escutcheon (Hydraulic Panel)... 1 Following Not Shown: Label (Air Supply Limits)
38 NEW DRG. S.C.L REVISIONS To Air Supply See Pneumatic Detail Electrical Enclosure Removed To Show Detail. MODEL FIRST MACH. LAST MACH. 400A PNEUMATIC HEAD LIFT ASSEMBLY PS PRINTED IN U.S.A.
39 CODE NO. PS PNEUMATIC HEAD LIFT ASSEMBLY Ref Pneumatic Head Lift Assembly Mounting Block Weldment Screw, Soc. Hd. Cap M x Pin Retaining Ring Pivot Bracket Screw, Hex. Hd. Cap 3/4-16NF x 1-1/ Adhesive (Loctite # Threadlock)... A.R Swivel Male Elbow Pneumatic Head Lift Cylinder Right Angle Flow Control Valve Vent Filter Breather Polyethylene Tubing 1/4 O.D. (Blue)... A.R Cylinder Mount Bracket Screw, Soc. Hd. Cap M x Following Not Shown: Tag (Attention - Air Pressure)
40 NEW DRG. S.C.L REVISIONS See Pneumatic Detail To Air Supply Drive Roller Vise Jaw removed to show detail. MODEL FIRST MACH. LAST MACH. 400A PNEUMATIC VISE ASSEMBLY PS PRINTED IN U.S.A.
41 CODE NO. PS PNEUMATIC VISE ASSEMBLY Ref Pneumatic Vise Assembly Screw, Soc. Hd. Cap M6-1.0 x Washer, Lock M6 Hi-Collar Washer Cylinder Adaptor Spacer Screw, Soc. Hd. Cap M x Washer, Lock M Pneumatic Vise Clamp Cylinder Screw, Soc. Hd. Cap M x Washer, Lock M Washer, Flat M Swivel Male Connector Polyethylene Tubing 1/4 O.D. (Blue)... A.R. 39
42 NEW DRG. S.C.L REVISIONS S.C.L A A SECTION A - A ADJUSTING SCREW ASSEMBLY SAW GUIDE DETAIL - BOTH GUIDES SAW GUIDE ARM ASSEMBLY MODEL FIRST MACH. LAST MACH. 400A M S PS PRINTED IN U.S.A.
43 SAW GUIDE ARM ASSEMBLY CODE NO. PS-5-88 Ref Saw Guide Arm Assembly Saw Guide Arm Screw, Soc. Set M x Spring Pin Mounting Bar Saw Guide Arm Lock Handwheel Brass Plug Saw Guide Arm Ball Bearing Washer, Lock M Plug Button Screw, Soc. Hd. Shoulder M x 16 (10 mm Dia.) Washer, Flat M Screw, Flat Hd. Mach. #10-24NC x 1/ Insert Assembly (Fixed) Insert Assembly (Adjustable) Adjusting Screw Assembly (See Detail)... 2 Ref Adjusting Screw Assembly Plunger Washer, Flat #8 S.A.E. Std Housing Belleville Washer Spring Pin Plug
44 NEW DRG. S.C.L REVISIONS S.C.L See Below See Below VISE CLAMP HANDWHEEL ASSEMBLY MOVABLE ROLLER VISE JAW ASSEMBLY MODEL FIRST MACH. LAST MACH. 400A VISE DETAIL PS PRINTED IN U.S.A.
45 CODE NO. PS VISE DETAIL Ref. Vise Detail Rack Pawl Pin Retaining Ring Nut Tee (.50 Tall; 3/8-16NC) Nut Tee (.88 Tall; M10-1.5) Screw, Soc. Hd. Cap 3/8-16NC x 1-1/ Screw, Soc. Hd. Cap M x Washer, Lock 3/8 Std Washer, Lock M Idler Roller Movable Vise Jaw Assembly (See Detail) Screw, Button Hd. Soc. M6-1.0 x Wear Plate Drive Roller Vise Jaw Assembly (Standard Rollers) (See Detail) Drive Roller Vise Jaw Assembly (Optional Knurled Rollers) (See Detail) Wear Plate Screw, Soc. Hd. Cap M6-1.0 x Washer, Lock M6 Hi-Collar Washer Vise Clamp Handwheel Assembly (See Detail) Screw, Soc. Hd. Cap M x Ref Vise Clamp Handwheel Assembly Handwheel Spring Pin Bearing Block Assembly Flanged Bearing Thrust Ball Bearing Hardened Washer Compression Spring Vise Lock Screw... 1 Ref Movable Roller Vise Jaw Assembly Handle Washer, Flat M Roller Housing Screw, Soc. Set M6-1.0 x 8 (Cone Point) Bearing Thrust Washer Roller Sleeve Bearing Bearing Thrust Washer Roller Washer, Flat M Shaft Retaining Ring Bearing Movable Roller Vise Jaw
46 NEW DRG. S.C.L REVISIONS MODEL FIRST MACH. LAST MACH. 400A WORK HEIGHT ASSEMBLY PS PRINTED IN U.S.A. 44
47 CODE NO. PS WORK HEIGHT ASSEMBLY Ref Work Height Assembly Bracket Thumb Screw Screw, Button Hd. Soc. M5-0.8 x Washer, Lock M Actuator Decal (Work Height Adjustment) Wand
48 1 0 1 NEW DRG. S.C.L REVISIONS S.C.L MODEL FIRST MACH. LAST MACH. 400A WORKSTOP ASSEMBLY PS PRINTED IN U.S.A.
49 CODE NO. PS WORKSTOP ASSEMBLY Ref Workstop Assembly 1* Tube Weldment Rule (Inch/Metric) Screw, Hex. Hd. Cap M5-0.8 x Nut, Hex. M Compression Spring Screw, Soc. Hd. Shoulder M x 30 (12 mm Dia.) Retaining Compound (Loctite #271)... A.R Screw, Soc. Hd. Cap M x Washer, Lock M12 Hi-Collar Washer, Flat 1/2 M Screw, Button Hd. Soc. M5-0.8 x Screw, Soc. Set M x Nut, Hex. Jam M Knob w/stud Brass Plug Scale (Fine Adjustment) (Inch) Scale (Fine Adjustment) (Metric) Key Adjusting Screw Post Knob w/stud Workstop Arm Bracket Screw, Button Hd. Soc. M4-0.7 x Spring Pin Screw, Soc. Set M x 16(Cone Point) Workstop Block Screw, Soc. Set M x Nut, Hex. Jam M Screw, Soc. Hd. Cap M x Brass Friction Plug Post Collar Cover... 1 *NOTE: Before Serial # : Tube Weldment
Parts Manual 400S. Band Sawing Machine
Parts Manual 400S Serial No: 597-09101 to Band Sawing Machine DAMAGE CLAIM PROCEDURES VISIBLE DAMAGE AT THE TIME OF DELIVERY: 1. Note damage on carrier s delivery receipt. Accept the shipment. It can be
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationParts Manual 2012-VH. Band Sawing Machine
Parts Manual 2012-VH Serial No: 561-03101 to Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More informationBUSH HOG LAND MAINTENANCE REPAIR PARTS MANUAL MODEL: TD-1100 SECTION: 66
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: TD-00 SECTION: 0 Griffin Ave. Selma, AL 0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG/ LAND MAINTENANCE REPAIR S MANUAL JUNE, 00
More informationMain Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
More informationMulching and Finishing Mowers MP and FP
Mulching and Finishing Mowers MP and FP Parts Manual Locke Turf 0 Highway E, Opp, Alabama, () -00 Transport Wheel, Tire & Spindle MP and FP ALPHABETICAL INDEX CONTENTS PAGE 00 Hydraulic Cylinder (Rear)
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
More informationMK-5000G exploded VieW
Frame accessories 38 cutting head Pump Assembly 39 connecting linkage foot pedal linkage 40 curtain blade guard 41 ENGINE Assembly 42 PARTS LIST A Frames - - A1 Frame, MK-5000 Main 1 155541 B Pivot Bracket
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationCONTAINER GUIDE WELDMENTS
CONTAINER GUIDE WELDMENTS FOR MODELS - ALL FRONT LOAD CONTAINERS 4/98 1 9110--39--0 L.H. Container Guide Weldment 1 2 9110--38--0 R.H. Container Guide Weldment 1 3 9110--56--1 Instruction Sheet (Not Shown)
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationRZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
More informationHANDLEBAR AND CONSOLE ASSEMBLY
Section 6 Parts List HANDLEBAR AND CONSOLE ASSEMBLY 4 33 47 4 49 7 3 78 4 97 46 44 37 38 37 48 39 35 36 34 7 3 4 5 45 4 3 4 0 33 9 96 80 6 300 84 9 5 30 4 9 30 4 3 43 97 0 43 3 68 9 9 Models 753B, F753B
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
More informationPARTS CATALOG ODYSSEY INCLUDES MOWER
PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationMK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK
MK IV OVERHEAD DOOR REPLACEMENT PARTS BOOK JAMISON DOOR COMPANY P.O. BOX 70 HAGERSTOWN, MARYLAND 21740 1-800-532-3667 301-733-3100 INTERNET: http://www.jamisondoor.com E-MAIL: contact@jamisondoor.com ECN
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More informationREAR ENGINE RIDER EUROPEAN SERIES 22
Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING...4,
More informationFIGURE 9 - PARTS LIST: MK-3024K CONCRETE SAW - P/N
FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 20 FIGURE 9 - : MK-3024K CONCRETE SAW - P/N 166449 IDENTIFYING 1 SCREW, 3/8-16 X 1-1/4 HEX HEAD CAP 150774 2 2 GRIP, HANDLE, 1.0 ID 150842 2 3 WASHER, 3/8
More informationLAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationYARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4
Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More informationPower Max Commercial 1028 OHXE Snowthrower
Form No. 3415-768 Rev B Power Max Commercial 1028 OHXE Snowthrower Model No. 38806 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3415-768* B Ordering Replacement Parts
More informationPARTS ORDERING INFORMATION
RP-268 REPAIR PARTS FOR VE268 Roll Grooving Tool PARTS ORDERING INFORMATION When ordering parts the following information is necessary for the Victaulic Tool Company to promptly process the order and send
More informationPARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
More informationWSL-Series. WSL- Series
WSL-Series WSL- Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco terminology,
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationIllustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationFlex 21 Mower. Greensmaster. Parts Catalog. Form Number Rev C. Model No and up.
Form Number 3362-156 Rev C Greensmaster Flex 21 Mower Model No. 04022-290000001 and up. Parts Catalog Ordering Replacement Parts To order replacement parts, please supply the part number, the quantity,
More informationCastle Model TSM-35. Heavy Duty Screw Pocket Machine. For Models with Serial Number and Above Items Included with Machine
Castle Model TSM-35 Heavy Duty Screw Pocket Machine For Models with Serial Number 63658 and Above Items Included with Machine Part No. Description Qty B02964 9/64" Castle Premium Brad Point Drill Bit w/
More informationMODEL S-32, 3200, ALL AMERICAN
MODEL S-32, 3200, ALL AMERICAN 1. 1 3201-7001 Chassis Weldment 2. 1 3204-7010 Bell Crank Weld 3. 1 3204-7009 Seconday Lift Weld 4. 1 3204-2018 Primary Lift Arm 6. 1 340-3025-S0 Seat Spring 6. 3 847-2803
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationTech. Services: (800) Fax: (800) Order Entry: (800) Fax: (800)
SPX Corporation 5885 11th Street Rockford, IL 61109-3699 USA Internet Address: http://www.hytec.com Tech. Services: (800) 477-8326 Fax: (800) 765-8326 Order Entry: (800) 541-1418 Fax: (800) 288-7031 Parts
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationZ-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler
Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 2 of 57 Air Filter & Muffler Ref # Part Number Qty S/P/F Description 11011 KM-11011-7003 1 S CASE-AIR FILTER 11013 KM-11013-7009
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
More informationCRAFTSMAN COMPOUND MITER SAW MODEL NUMBER REPAIR SHEET
CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 REPAIR SHEET CRAFTSMAN COMPOUND MITER SAW MODEL NUMBER 5.50 Figure A 4 5 7 8 0 4 5 7 8 0 5 4 7 8 0 5 4 5 7 8 40 4 4 4 44 45 4 4 47 48 50 4 5 5 4 5 54 5 55
More informationCOMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
More informationSuper EZ Chain Saw UT Page 1 of 18 Tools And Accessories
Super EZ Chain Saw UT-10440 Page 1 of 18 Tools And Accessories Super EZ Chain Saw UT-10440 Page 2 of 18 Tools And Accessories 24299 24299 ANVIL- Crankshaft installation 24304 24304 BIT- #2 pozidrive 24295
More informationSTX-26 Stump Grinder
Form No. 3365-311 Rev B STX-26 Stump Grinder Model No. 23210 Serial No. 310000001 and Up Model No. 23210G Serial No. 310000001 and Up Register at www.toro.com. Original Instructions (EN) *3365-311* B Ordering
More information13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor
13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly
More informationParts Manual DC-330NC. Band Sawing Machine
Parts Manual By DC-330NC Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE SERIAL NO. CYCLE PHASE For your information and future reference, insert pertinent data concerning your machine in the
More informationFIELD & BRUSH MOWER SERIES 0
Parts Manual for SERIES 0 MODEL FB13250BS FB13250BV FB15250KW McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1, 8/30/2005 Table Of Contents PAGE GROUP
More informationGenset. Parts Catalog GHAB. Parts Manual
Genset Parts Manual Parts Catalog To avoid errors or delay in filling your parts order, always give the MODEL, SPEC NO. and SERIAL NO. from the Onan nameplate. For handy reference, insert your nameplate
More informationRetriever PARTS LIST Advance MODEL 5200G(OBSOLETE)
Retriever PARTS LIST Advance MODEL 5200G(OBSOLETE) 5/85 revised 2/01 FORM NO. 56042131 TABLE OF CONTENTS DESCRIPTION PAGE OUTER BODY...1-2 HYDRAULIC PUMP, ENGINE & FUEL TANK...3-4 HYDRAULIC OIL FILTER,
More informationCastle Model TSM-21 Standard Screw Pocket Machine
Castle Model TSM-21 Standard Screw Pocket Machine "For Models with Serial Number 62481 and Above" Items Included with Machine Part No. Description Qty B00964 Castle 9/64 Cobalt Drill Bit w 1/4" Shank 1
More informationTABLE OF CONTENTS PAGE NO. DESCRIPTION
P-11549 (3-9-07) TABLE OF CONTENTS DESCRIPTION PAGE 36" DECK AND RELATED PARTS 1 48" DECK AND RELATED PARTS CASTER WHEEL ASSEMBLY 3 DECK SPINDLE ASSEMBLY 4 DECK IDLERS AND RELATED PARTS 5 DRIVE LINE PARTS
More informationSuper EZ Chain Saw UT Page 1 of 19 Carburetor
Super EZ Chain Saw UT-10580 Page 1 of 19 Carburetor Super EZ Chain Saw UT-10580 Page 2 of 19 Carburetor 1 93203A 1 /P Repair Kit Includes items 1-16. 2 93203A 1 /P Repair Kit Includes items 1-16. 3 93203A
More informationSuper 1050 Chain Saw UT Page 1 of 16 Carburetor Chamber
Super 1050 Chain Saw UT-10139 Page 1 of 16 Carburetor Chamber Super 1050 Chain Saw UT-10139 Page 2 of 16 Carburetor Chamber 1 58319A 1 RING- Retaining 2 592301 1 COVER- Air filter 3 A70326 1 NUT- Cover
More informationIllustrated Parts List
Illustrated Parts List. Ordering Parts For your convenience, replacement parts and accessories can be ordered from ARPAC by fax 24 hours a day. Please have the following information available to ensure
More information42B350Z PARTS MANUAL
4 2 B 3 5 0 Z PARTS MANUAL 64 56 68 2 48 45 30 47 62 26 38 7 35 33 65 43 42 6 16 26 40 31 1 23 14 5 16 19 36 21 20 27 28 24 26 66 22 44 28 29 28 68 34 30 29 32 39 13 17 14 15 12 5 3 4 57 55 54 61 59 60
More informationWYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE
PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationRetriever 5100G/P. 11/89 revised 10/02 FORM NO
Retriever 5100G/P PARTS LIST Advance MODELS 56497000, 56497010 This parts list is for machines after serial number 353005 All models covered in this manual are OBSOLETE 11/89 revised 10/02 FORM NO. 56042216
More informationRetriever 5800G/P/D. revised 2/01 Form Number
Retriever 5800G/P/D PARTS LIST Advance MODELS 56482005, 56482010, 56482015 This parts list is for machines after serial number 221134 All models covered in this manual are OBSOLETE revised 2/01 Form Number
More informationLAND MAINTENANCE REPAIR PARTS MANUAL BUSH HOG MODEL: 307 SECTION: 16
BUSH HOG LAND MAINTENANCE REPAIR S MANUAL MODEL: 0 SECTION: P.O. Box 0 Selma, AL 0-0 () - () -00 Parts Ordering -00-0- Fax -00-- www.bushhog.com BUSH HOG / LAND MAINTENANCE REPAIR S MANUAL SEPTEMBER, 0
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationCOMPACT WHEEL LOADERS before PIN BH - before PIN Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - before PIN 14190349 6018BH - before PIN 14190351 Parts Catalog 8-3052 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS
More informationSTX-38 EFI Stump Grinder with Intelli-Sweep
Form No. 3421-244 Rev A STX-38 EFI Stump Grinder with Intelli-Sweep Model No. 23214 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-244* A Ordering Replacement Parts
More informationCraftsman Snow Thrower Model PARTS LIST
Craftsman Snow Thrower Model 24.881900 PARTS LIST 11 13 3 2 24 9 1 18 4 2 1 20 23 1 14 1 9 2 4 4 4 3 28 8 3 4 3 39 0 3 43 38 2 48 2 42 1 41 40 49 4 44 31 4 31 21 29 34 9 19 10 32 22 2 Craftsman Snow Thrower
More informationFIELD & BRUSH MOWER SERIES 0
Parts Manual for SERIES 0 MODEL FB13250BS (7085922) GM2513BS (3070980) GM2513H (3070101) GM2513H (7085924) GM2515KAW (3070103) GM2515KAW (7085923) GM2516BVG (3800017) COPYRIGHT 2009 GIANT-VAC ALL RIGHTS
More informationMitre Band Saw. Installation and Operating Instructions Note: Not all saw parts are shown in this booklet. Replaceable Aluminum Saw Table
P ARTS C ATALOG 2G PARTS CATALOG Drive Wheel End Pulley Box Speed Reducer M FG. COMPANY, INC. Mitre Band Saw Installation and Operating Instructions Note: Not all saw parts are shown in this booklet Motor
More informationPARTS CATALOG
R Ingersoll COMPACT TRACTORS WITH DIESEL ENGINES 3118D AND 4118D PARTS CATALOG 8-3310 PAINT ENGINES GENERAL INFO MODEL 3118D and 4118D COMPACT TRACTORS PRODUCT IDENTIFICATION NUMBERS (PIN) OR SERIAL NUMBERS
More informationPart s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
More informationSuper XL 925 Chain Saw UT Page 1 of 15 Carburetor Chamber
Super XL 925 Chain Saw UT-10415 Page 1 of 15 Carburetor Chamber Super XL 925 Chain Saw UT-10415 Page 2 of 15 Carburetor Chamber 1 63370A 1 RETAINER- Reed valve 2 63166A 4 VALVE- Reed 3 63371B 1 SEAT- Reed
More informationCOMPACT WHEEL LOADERS PIN and after 6018BH - PIN and after 6020L, 6020BH Parts Catalog
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - PIN 14190349 and after 6018BH - PIN 14190351 and after 6020L, 6020BH Parts Catalog 8-3360 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO MAIN INDEX
More informationHydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
More informationForm No Rev A. Greensmaster Flex 18 Traction Unit Model No Serial No and Up
Form No. 3365-319 Rev A Greensmaster Flex 18 Traction Unit Model No. 04019 Serial No. 310002001 and Up Register at www.toro.com. Original Instructions (EN) Ordering Replacement Parts To order replacement
More informationAdvolution 2710 PARTS LIST MODELS , , /06 revised 5/09 FORM NO
PARTS LIST MODELS 56422000, 56422002, 56422184 3/06 revised 5/09 06-3 09-5 TABLE OF CONTENTS 1 DESCRIPTION PAGE Body System... 2-3 Chassis System... 4-5 Decal System... 6-7 Electrical System... 8-9 Pad
More informationCATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS MODEL D340 MIXER (INCLUDES MOTOR PARTS) D340 D340C ML-134254 ML-134257 PRIOR MLS COVERED IN THIS CATALOG D340 ML-134185 D340C ML-134188 D340 W/O Brake ML-104483 D340 W/Brake
More informationNOTE: Order parts by Catalog Number Only. DO NOT order by Reference Number.
K-C/K-R Cage Machine Transportation Cart Assembly 0 NOTE: Order parts by Catalog Number Only. Ref. No. 0 Catalog No. 00 000 0 0 0 0 0 00 0 0 0 0 0 Description Cart Assembly Hex Nut /" () Lock Washer /"
More informationPARTS LIST. Reproduction. Not for. Models. Mfg. No. Description MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011)
PARTS LIST Models Mfg. No. Description 1696060 MH61900, Murray 9TP 24" Dual Stage Snowthrower, CE (2011) Manual Part No. Revision A Rev. Date: 6/20/2011 Table Of Contents PRODUCT COMPONENTS PAGES Handles
More informationTRX-26 Trencher. Model No Serial No and Up * * B. Register at Original Instructions (EN)
Form No. 3414-278 Rev B TRX-26 Trencher Model No. 22974 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3414-278* B Ordering Replacement Parts To order replacement parts,
More informationSTX-26 Stump Grinder
Form No. 3383-656 Rev B STX-26 Stump Grinder Model No. 23208 Serial No. 314000001 and Up Model No. 23208G Serial No. 314000001 and Up Register at www.toro.com. Original Instructions (EN) *3383-656* B Ordering
More informationPARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 KEY # PART # DESCRIPTION QTY. KEY # PART # DESCRIPTION QTY. 1. 84-100-56B FRONT FRAME CLOSURE 1 24. 84-125-108 RETAINER STRAP ASSEMBLY
More informationReproduction. Not for. Large Frame Dual Stage Snowthrowers. Parts Manual. Attachment
Parts Manual Attachment Large Frame Dual Stage Snowthrowers Mfg. No. Description 1695987 (L1528E), 14.5TP 28" Dual Stage Snowthrower 1695988 (L1730E), 16.5GT 30" Dual Stage Snowthrower 1695996 (L1428EX),
More informationForm 7-53, 11-15c Supersedes Form 7-53, 03-13c Sheet 1 of , Swing Air Jack Hunter Engineering Company
Form 7-53, 11-15c Sheet 1 of 8 133-84-1, 133-85-1 Swing Air Jack 2013-2016 Hunter Engineering Company 133-84-1, 133-85-1 Swing Air Jack REFER TO NEXT SHEET FOR PARTS DESCRIPTION LISTING Form 7-53, 11-15c
More informationCATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS SLICERS (INCLUDES MOTOR PARTS) 2912PS 2912SC ML-104966 ML-104965 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 34655 (Apr. 2001) 7-8-9-10 5-6
More informationWS-50-XLE 50hp High Cycle Diamond Wire Saw
50hp High Cycle Diamond Wire Saw Part Book April 05 www.diamondproducts.com REV. 0 50hp Electric High Cycle Pneumatic Diamond Wire Saw. Setup Recommendations. Overview. Auxiliary Accessories. Fixed Motor
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrowers. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695821 (I1224E), 11.5TP 24" Dual Stage Snowthrower 1695842 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrowers Not for Reproduction
More informationParts List Wright Stander Rapid-Hite Mower (For Serial Numbers and Higher Until Superseded)
Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers 33615 and Higher Until Superseded) Replace with newer revisions as they become available 2007 Wright Manufacturing, Inc. All rights reserved
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More informationParts Manual DC-460NC. Band Sawing Machine
Parts Manual By DC-60NC Band Sawing Machine MACHINE SPECIFICATIONS MODEL VOLTAGE SERIAL NO. CYCLE PHASE For your information and future reference, insert pertinent data concerning your machine in the spaces
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationSINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS COMMUNITY FOLDER
SINGLE WIDE MASTER CATALOG GOSS COMMUNITY UNIT GOSS (Click on the name to be taken to that section) Stocking Manufacturer of Quality Replacement Parts (815) 965-0884 Fax (815)965-1049 Welcome to the Quality
More informationMODEL NO & UP SAFETY AND INSTRUCTION DECALS
FORM NO. 95-2194 REV. B MODEL NO. 41105-90001 & UP PARTS CATALOG MULTI PRO 1100 VEHICLE SAFETY AND INSTRUCTION DECALS The following safety and instruction decals are installed on the vehicle. If any become
More informationParts Manual DX254 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX254 / 966651203 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationReproduction. Not for. Mid Frame Dual Stage Snowthrower. Parts Manual
Parts Manual Attachment Mfg. No. Description 1695994 (I924EX), 9TP 24" Snowthrower (CE/Export) Mid Frame Dual Stage Snowthrower Not for Reproduction Manual Part No. Revision - Rev. Date: 7/20/2011 Table
More informationModels 820 and 840 2
Models 820 and 840 2 Models 820 and 840 1 783-0250 Hood 2 738-0952 Shld. Bolt.375" Dia. x.5" 3 736-0175 Spr. Washer.265" I.D. x.562" OD 4 710-0751 Hex Bolt 1/4-20 x.62" * 6 7-0271 Hex Sems Nut 1/4-20 Thd.
More informationIllustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN For a complete distributor & dealer list go to
Illustrated Parts & Packing List 528 Gandrud Road, Owatonna, MN 55060 For a complete distributor & dealer list go to www.gandy.net 66GW27F Orbit-Air Applicator 120 Cu. Ft. Hopper w/ 27 (2 ) Openings, Fertilizer
More information