Parts Manual for the Wright Z

Transcription

1 Parts Manual for the Wright Z Serial numbers & Higher Check for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights Reserved.

2 48", 52" & 61" CUTTER DECKS REF. # DESCRIPTION 48" 52" 61" PART # REF. # DESCRIPTION 48" 52" 61" PART # 48" CUTTER DECK W/ ISOL. CAPS NUT, 3/ " CUTTER DECK W/ ISOL. CAPS WASHER, FLAT USS 5/8 Z " CUTTER DECK W/ ISOL CAPS BOLT, HEX 5/8-11 X 1-1/2 Z CUTTER DECK, 48' REAR DISCHARGE, WZ SPINDLE ASSEMBLY CUTTER DECK, 52' REAR DISCHARGE, WZ REF SPINDLE UPGRADE (92 TO 114) KIT CUTTER DECK, 61' REAR DISCHARGE, WZ BOLT,FLANGE, 3/8-16 X 1 1/4 Z LEFT DECK COVER FOR 48" & 52" MACHINE KEY 1/4 X 1/4 X LEFT DECK COVER FOR 61" NUT, NYLOCK 1/2-20 Z CENTER DECK COVER BOLT, HCS, 5/8-11 X 4 1/2 Z RIGHT DECK COVER FOR 48" & 52" WHEEL, PLASTIC, ANTI-SCALP RIGHT DECK COVER FOR 61" NUT, LOCK FLANGE 5/8-11 Z BOLT, HCS, 1/4-20X1 PLAIN NUT, NYLOCK 5/16-18 Z BUSHING, SPLIT TAPERED, 1" SPRING, TORSION FOR CHUTE DEFLECTOR PULLEY, SINGLE GRV 5.50 OD BOLT, HEX 5/16-18 X 4 1/2 Z PULLEY, SINGLE GRV 6 OD BOLT, CARRIAGE 3/8 X 1 Z PULLEY, SINGLE GRV 7 OD FLEXIBLE CHUTE DEFLECTOR CLAMP PLATE PULLEY, DOUBLE GRV 5.50 OD CHUTE DEFLECTOR, RUBBER PIECE ONLY PULLEY, DOUBLE GRV 6 OD DEFLECTOR FLANGE WELDMENT PULLEY, DOUBLE GRV 7 OD BOLT, HEX 5/16-18 X 1 Z PULLEY, DECK, 48, 52" AND 61" DECK MULCHING BLOCK OFF PLATE " DECK, ENGINE/BLADE BELT NUT, LOCK FLANGE 3/8-16 Z " DECK, ENGINE/BLADE BELT DECK KNOB " DECK, ENGINE/BLADE BELT NUT, NYLOCK 3/8-24 (CE ONLY) " DECK, BLADE/BLADE BELT /4-10 NYLOCK NUT " DECK, BLADE/BLADE BELT /4-10 x 2 1/4 HEX BOLT " DECK, BLADE/BLADE BELT CHUTE DEFLECTOR KIT, FLEXIBLE NUT, LOCK FLANGE 3/8-24 Z MULCH BAFFLE,CURVED, RIGHT,48" T-ROD, DECK COVER MULCH BAFFLE,CURVED, RIGHT,52" BOLT, HCS, 1/2-20X3.5 Z MULCH BAFFLE,CURVED, RIGHT,61" WASHER, FENDER 5/16 X 1 1/4 Z MULCH BAFFLE,CURVED, LEFT,48" BEARING, BALL, FOR IDLER ARM MULCH BAFFLE,CURVED, LEFT,52" CIS BEARING BUSHING MULCH BAFFLE,CURVED, LEFT,61" SPRING, 2.5" DECK IDLER SPRING MULCH KIT, CURVED, 48" IDLER ARM ASSEMBLY, RIGHT, 7" MULCH KIT, CURVED, 52" IDLER ARM ASSEMBLY, LEFT, 7" MULCH KIT, CURVED, 61" MACH BUSH, 1/2 ID X 7/8 OD X 18 GA /16-18 FLANGE NUT IDLER ARM WASHER LINK CHAIN BOLT, HEX 3/8-16 X 2 1/2 Z DECK ADJUSTMENT PLATE PULLEY, SMALL IDLER, 48" DECK /16-18 x 3/4 CARRIAGE BOLT PULLEY, IDLER, 6.00, 52"-61" DECK /8-16 x 3/4 FLANGE BOLT NUT, TOPLOCK 3/ WASHER, FLAT USS 3/8 x 1 1/ WASHER, FLAT USS 5/16 z /8-11 TOPLOCK NUT WASHER, FLAT USS 3/8 x 1 1/ /8 X 1 3/8 FLAT WASHER BORE ADAPTER, 30MM X 33.5MM BOLT, HEX 3/8-16 X 2 Z BORE ADAPTER, 30MM X 41MM BOLT, HEX 3/8-16 X 2 1/4 Z CAP, VINYL 3/8 X DECK BAFFLE KIT, 48", W/ HARDWARE BOLT, FLANGE 3/8-16 X 1 Z DECK BAFFLE KIT, 52", W/ HARDWARE BLADE, 16 1/2" (FOR 48" DECK) DECK BAFFLE KIT, 61", W/ HARDWARE BLADE, 18" (FOR 52" DECK) BLADE, 21" (FOR 61" DECK)

3

4 COCKPIT REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 SEAT TRAY /2" x 3/8" ALLEN SHOULDER BOLT SEAT SUPPORT PLATFORM /2" MACHINE BUSHING FOAM HANDLE GRIP SEAT LATCH GRIP-CUT TO SIZE RIGHT CONTROL ARM HANDLE SEAT TRAY LATCH LEFT CONTROL ARM HANDLE /8" TOP LOCK RIGHT LOWER CONTROL ARM /16"-18 FLANGE NUT LEFT LOWER CONTROL ARM /2" x 1" ALLEN SHOULDER BOLT RIGHT LOWER CONTROL PIVOT WELDMENT SINGLE POLE SWITCH-GRAY LEFT LOWER CONTROL PIVOT WELDMENT DOUBLE POLE SWITHC-BLACK CONTROL LEVER EXTENSION SPRING SINGLE POLE SWITCH-BLACK CONTROL PIVOT ROD RUBBER SEAT BUMPER /16"-18 TOPLOCK /8"-16 x 1 1/2" BOLT CONTROL LEVER DAMPER /8"-16 FLANGE NUT DAMPER BALL END-5/16" /8"-16x1" FLANGE BOLT ELECTRIC KEY SWITCH /8"-16x3/4" FLANGE BOLT BLADE SWITCH /2" BRONZE BUSHINGS S.S. SCREW 3/4" /16" /2" BOLT HOURMETER /4" FLAT WASHER HOURMETER RETAINER-INCL IN #18 N/A 51 5/16"-24 FLANGE NUT TRUSS SCREW /2" - 5 3/16" BOLT VKAXLE U NUT /2" E-CLIP THROTTLE CABLE /2"-20 LOW PROFILE NYLOCK DASH PANEL /16"-18x3/ HARNESS RELAY HYDRO TANK WELDMENT BLADE DELAY MODULE HYDRO TANK FILL PLUG WIRING HARNESS BRAKE HANDLE GRIP ADJUSTABLE SUSPENSION SEAT WITH ARM RESTS BRAKE HANDLE REPLACEMENT ARM REST-RIGHT BRAKE LEVER BAR REPLACEMENT ARM REST-LEFT SEAT OPC SPRING FUEL FILTER MOTION CONTROL SLOT GUARD, LEFT /4" HOSE CLAMP MOTION CONTROL SLOT GUARD, RIGHT WAY FUEL VALVE BOLT, CARRIAGE 5/16-18 X 3/4 Z /2 BRONZE BUSHING, LONG BOLT, HEX 5/16-18 X 3/4 Z /4" FUEL LINE-CUT TO FIT

5

6 MAIN FRAME 1 REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 WRIGHT Z TRACTOR BODY TAPERED ROLLER BEARING RACE FRONT CASTER FRAME FLANGED BUSHING, 1 1/4 ID X 1 3/8 OD FOOT PLATFORM MACHINED, SS SPACER, 1 1/4" OD X 1/2" ID BASE TRACTION PAD FOR FOOT PLATFORM NUT, NYLOCK, 1/2-20, LOW PROFILE HYDRAULIC PUMP-RIGHT SIDE NUT, NYLOCK, 1/ HYDRAULIC PUMP-LEFT SIDE HYDRAULIC OIL FILTER HOUSING BLOCK ROUND SCREW, 1/4-20x HYDRAULIC OIL FILTER CARTRIDGE NUT, NYLOCK, 1/ BUSHING, RUBBER, PUSH ARM BALL JOINT ROD END, RH THREAD BEARING ROD END, 3/4-16 RH T-ROD, PUMP CONTROL NUT, JAM 3/4-16 Z BALL JOINT ROD END, LH THREAD DECK LINK T- BAR ASSEMBLY NUT, NYLOCK, 5/ /4 X 1/2 X 4 SPANNER VKSPNNR 13 OUTDOOR BATTERY-SEE YOUR LOCAL DEALER N/A 59 BOLT, HEX, 1/2-20x5 1/ BLACK GROUND CABLE MACH. BUSHING, 3/4 ID X 1 1/4 X 14 GA BOLT, FLANGE 3/8-16 X FRONT CASTER BEARING SET RED PIGTAIL FLANGED BUSHING, SPLIT, 7/8" ID SOLENOID GROUND WIRE WASHER, FLAT 7/16 Z STARTER SOLENOID DECK LIFT AXLE CONNECTOR WASHER BATTERY HOLD-DOWN HEX BOLT, 1/2-20 X 1 3/ DECK-LIFT SELECTOR PLATE BOLT, HEX 1/2-20 X 1 1/ DECK-LIFT FOOT PEDAL BOLT, HEX 1/2-20 X 2 1/ DECK-LIFT LATCH DETENT ARM NUT, NYLOCK 3/ FOOT PEDAL SPRING NUT, LOCK FLANGE 5/ DECK-LIFT DETENT ARM SPRING NUT, LOCK FLANGE 3/ ALLEN SHOULDER BOLT, 1/2x3/ WASHER, FLAT 1/ BOLT, FLANGE 1/2-13 X 1 1/4 Z BEARING, BALL SEALED BALL BEARING DECK-LIFT LATCH DECK-LIFT SELECTOR PLATE SPANNER MACH BUSH, 1/2 ID X 7/8 OD X 14 GA DUST CAP, CASTER ARM DECK-LIFT LATCH SPANNER COTTER PIN 1/8 X MACH BUSH, 1/2 ID X 7/8 OD X 18 GA NUT, CASTLE, JAM-TYPE 1-14 THREAD BOLT, HEX 5/16-18X1 1/ TAPERED BEARING FOR CASTER ARM BOLT, HEX 3/8-16 X 1 1/ BEARING RACE FOR CASTER ARM BOLT, HEX 5/16-18 X DECK-LIFT AXLE SPANNER NUT, NYLOCK 5/ SEAL, GREASE, FOR CASTER ARM DECK-LIFT AXLE CASTER YOKE, 48 AND 52" DECK BOLT, FLANGE 5/16-18 X 3/ CASTER YOKE, 61" DECK SCREW, TRUSS HD MACH 1/4-20 X 3/4 SS BOLT, HEX 3/4-10 X 7 1/2 (FOR 48" & 52" DECKS) NUT, NYLOCK 1/ BOLT, HEX 3/4-10 X 9 1/2 (FOR 61" DECK) NUT, LOCK FLANGE 5/ NUT, NYLOCK JAM 3/ WASHER, LOCK 1/ RIGHT FOOT TRACTION PAD FOR FOOT PLATFORM NUT, JAM 1/ LEFT FOOT TRACTION PAD FOR FOOT PLATFORM BOLT, HEX 1/4-20 X 5/ FLAT FREE CASTER WHEEL, 48" AND 52" DECK NUT, LOCK FLANGE 7/ FLAT FREE CASTER WHEEL, 61" DECK BOLT, CARRIAGE 7/16-14 X 1 1/ GREASE FITTING WHLZERK 91 DECK LIFT AXLE CONNECTOR BEARING KIT FOR 11X400-5 CASTER WHEEL NUT, LH JAM 5/16-24 Z SPACER, FOR CASTER WHEELS NUT, JAM, HEX 5/16-24 Z SEAL, FOR CASTER WHEELS BOLT, FLANGE 3/8-16 X 3/4 Z BEARING, FOR CASTER WHEELS ROPS SYSTEM REF DECK LIFT FOOT LEVER EXTENSION KIT

7

8 MAIN FRAME 2 REF. # DESCRIPTION PART # REF. # DESCRIPTION PART # 1 OBTAIN FROM AUTHORIZED KAWASAKI DEALER N/A 43 WHEEL MOTOR SUPPORT-LEFT OR RIGHT BOLT, FLANGE 5/16-18 X 1 Z WHEEL MOTOR, LEFT ENGINE EXHAUST MANIFOLD NUT, HEX M WHEEL MOTOR, RIGHT BOLT, HEX 5/16-24 X 1 3/4 Z BOLT, HEX 1/2-20 X 2 1/2 Z WASHER, FLAT 1/4" NUT, NYLOCK 1/2-20 Z NUT, TOP LOCK, 5/16-24 Z GAS CAP O-RING, FOR KAWASAKI OIL DRAIN ADAPT RIGHT GAS TANK WITH DASH CAVITY OIL DRAIN VALVE ADAPTER LEFT GAS TANK WITH CUP HOLDER OIL DRAIN VALVE GAS TANK SUPPORT, RIGHT FITTING, MALE BARB 1/ GAS TANK SUPPORT, LEFT TUBE, OIL DRAIN FILTERED FUEL PORT NUT, U 1/ VIBRATION DAMPER MOUNT OIL COOLER - STACKED PLATE WASHER, FENDER 5/16 X 1 1/4 Z OIL COOLER CRADLE WELDMENT BOLT, FLANGE 3/8-16 X 1 Z SCREW, TRUSS HD PH 1/4-20 X 1/2 SS BELT GUIDE WELDMENT, DECK, WZ OIL COOLER COVER WELDMENT ENGINE BELT GUARD NUT, JAM 1/4-20 Z PTO CLUTCH MACHINED SPACER NUT, NYLOCK 1/4-20 Z HEAVY DUTY PTO CLUTCH CAP, VINYL 3/8 X PULLEY, ENGINE HYDRO SPRING, TORSION BELT, WRAPPED BOLT, HEX 1/4-20 X 7/8 GR8 PL PULLEY, SINGLE GRV 6 OD-A/B CLIP, HALF 5/ PULLEY, SMALL IDLER, DECK HYDRAULIC HOSE CLAMP MACHINE KEY BOLT, HEX 1/4-20 X 5/8 Z D-SPACER, FOR CLUTCH WASHER, FLAT USS 5/16 z WASHER, LOCK 7/16 Z BOLT, FLANGE 3/8-16 X 3/4 Z BOLT, HEX 7/16-20 X 2 3/4 Z BOLT, HEX 5/16-18X1 1/4 Z BUSHING SPLIT TAPERED X 17MM NUT, LOCK FLANGE 7/16-14 Z BOLT, HEX 1/4-20 X 7/8 GR8 PL MACH BUSH, 1/2 ID X 7/8 OD X 18 GA BOLT, HEX 3/8-16 X 2 3/4 Z E-CLIP SPRING, 2.5" DECK IDLER SPRING BRAKE SHOE NUT, NYLOCK JAM 1/2-20 Z BRAKE BAR IDLER ARM WASHER BRAKE RELEASE SPRING MACHINE KEY 5MM X 5MM X 25MM WHEEL LUG NUT BEARING, BALL, FOR IDLER ARM, NEW TIRE FOR 48" AND 52" CIS BEARING BUSHING TIRE FOR 61" IDLER ARM ASSEMBLY, RIGHT, 7" RIM FOR 48" AND 52" WASHER, FENDER 5/16 X 1 1/4 Z RIM FOR 61" BOLT, HCS, 1/2-20X3.5 Z WHEEL ASSEMBLY FOR 48" AND 52" ENGINE CAGE WHEEL ASSEMBLY FOR 61" BOLT, FLANGE 5/16-18 X 3/4 Z COTTER PIN 1/8 X NUT, LOCK FLANGE 5/16-18 Z NUT, CASTLE FOR WHEEL MOTOR NUT, LOCK FLANGE 3/8-16 Z WHEEL HUB NUT, TOPLOCK 3/ STUD FOR TAPERED HUB BOLT-ON CLUTCH STOP BOLT, FLANGE 1/2-13 X 1 1/4 Z

9

10 HYDRAULIC PARTS REF. # DESCRIPTION PART # 1 HYDRAULIC TANK HYDRAULIC TANK CAP HYDRO MOTOR, RIGHT (CW) YOU WILL RECEIVE , Sw ap HP hoses at WM HOSE, HYDRO LOW, TNK-FLTR, INCL. #8, # HOSE, HYDRO LOW, FLTR-PUMP, INCL. #8x ELBOW, STRGHT THRD ORING 1/2 X 5/ FITTING, 3/8 NPT X 3/8 BARBED FITTING FITTING, BARBTITE FEMALE HOSE, HYDRO LOW, SP, TNK-CLR, INCL. # HOSE, HYDRO LOW, SP, TNK-FLTR, INCL. # HOSE CLAMP OIL COOLER TEE STRAIGHT O-RING FACE HOSE, HYDRO HIGH PRESS, RIGHT HOSE, HYDRO HIGH PRESS, LEFT ELBOW, STRGHT THRD ORING 3/8 X 3/8 JIC HYDRO OIL FILTER HOUSING BLOCK HYDRO OIL FILTER HYDRO PUMP, W/RTN RIGHT HYDRO PUMP, W/RTN LEFT TANK VENT, 1/4" STRAIGHT MJIC X FJIC HOSE, HYDRO LOW, PUMP-PUMP, INCL. #8x ELBOW, 1/2" STRAIGHT THRD ORING X 3/8 JIC

11

12 Roll Over Protective Structure (ROPS) REF. # DESCRIPTION PART # 1 WZ ROPS LEG WELDMENT, LH WZ ROPS LEG WELDMENT, RH WZ ROPS CENTER WELDMENT WZ ROPS HARDWARE KIT *5 WZ ROPS SEAT BELT RETRACTOR *6 WZ ROPS SEAT BELT BUCKLE HHCS, 7/16-14NC x 1.25 LG GR HEX NYLOCK NUT, 7/16-14NC GR FLAT WASHER, 7/ HHCS, 1/2-13NC x 3.00 LG GR WZ ROPS LOCKING PIN WZ ROPS FOAM WASHER HEX NUT, CENTERLOCK, 1/2-13NC WZ ROPS LANYARD RETAINER WZ ROPS NYLON LANYARD HHCS, 3/8-16NC x 1.25 LG GR HEX NYLOCK NUT, 3/8-16NC GR WZ ROPS BUMPER *Not available separately*

13

14 Part # Description BAG COLLECTION SYSTEM BAG COLLECTION SYSTEM BAG COLLECTION SYSTEM BAG COLLECTION SYSTEM

15

16

17

18

19

20

21

22 18 REF # DESCRIPTION PART # REF # DESCRIPTION PART # 1 WRIGHT Z MOWER DECAL WRIGHT PRODUCTS DASH DECAL SHEILD MISSING GENERAL SAFETY DECAL SHEILD MISSING-CE ONLY WRIGHT W DECAL WRIGHT PATENTS DECAL DECK DECAL BLADE HAZARD DECK DECAL BLADE HAZARD-CE ONLY DECK DECAL HEARING PROTECTION-CE ONLY DECK DECAL NOISE-105 Db CE ONLY DECK-HEIGHT SELECTOR DECAL DECAL, FIRE HAZARD WARNING DECAL

23

24