REAR ENGINE RIDER EUROPEAN SERIES 22

Size: px

Start display at page:

Download "REAR ENGINE RIDER EUROPEAN SERIES 22"

Margery Lamb
5 years ago
Views:

Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY... 22 FRONT END, STEERING.

.. 2-29 SMOOTH CLUTCH ASSEMBLY..., 1 ELECTRICAL SYSTEMS (Briggs)... 0, 1 CUTTING DECKS, DEFLECTORS...14, 15 ELECTRICAL SYSTEMS (Kohler)... 2, RAILS, LIFT ARMS, CAM LIFT...1, 1 WIRING SCHEMATICS.

1 Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS, TIRES...2, DRIVE DISC ASSEMBLY FRONT END, STEERING...4, 5 FUEL TANK & OPERATORS SEAT... 2 MAIN CASE..., ENGINE & EXHAUST MUFFLER DIFFERENTIAL, R.H. FENDER...8, 9 THROTTLE CONTROLS CHAIN CASE ASSEMBLY, L.H. FENDER..., 11 DECALS SMOOTH CLUTCH ASSEMBLY..., 1 ELECTRICAL SYSTEMS (Briggs)... 0, 1 CUTTING DECKS, DEFLECTORS...14, 15 ELECTRICAL SYSTEMS (Kohler)... 2, RAILS, LIFT ARMS, CAM LIFT...1, 1 WIRING SCHEMATICS... 4, 5 BLADE STOP PEDALS...18 ACCESSORIES & ATTACHMENTS... SPINDLE ASSEMBLY...19 HARDWARE BAGS... BELTS, BRAKES, INTERLOCK...20, 21 COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 1, 0/0/02) MANUAL No. 09

2 WHEELS - FRONT 1 ASSEMBLY ASSEMBLY, Front Tire & Rim (Complete) (Includes Items 2,, 4, 5 & ) 2-5 TIRE, 11 x (Kenda) 1-14 RIM (For 4./.50 x 4 Tire) BEARING, Ball VALVE, Air (Snap-in) 1-49 FITTING Lube WASHER, /4 I.D CAP, Hub SEAL, Felt -8 CAP, Dust PIN, Cotter 5/2 x 1" (2) TUBE, Inner (For 4./.50 x 4 Tire) 11 8 MANUAL No R. E. RIDER (EURO)

3 8 2 WHEELS - REAR ASSEMBLY ASSEMBLY, Rear Tire & Rim (Includes Items 2B, B & 4) (" Models) TIRE, x 8 (" Models) 1-14 RIM, Extra Wide, (For 1/.50 x 8 Tire) (" Models) VALVE, Air (Snap-in) CLAMP, Right Hand (8, & 1 HP) CLAMP, Right Hand (, 14 & 15 HP) BOLT, 1/2-20 x /4" Lug () -12 BOOT, Right Hand (8 & HP) SEAL, Oil HUB, Rear Wheel R. H. (Weldment) CAP, Hub CAP, Hub (Left Hand) HUB, Rear Wheel L.H. (Weldment) NUT, 5/1-24 Hex Center Lock BOLT, 5/1-24 x 1-5/8" Tapered (Left Hand) BOLT, 5/1-24 x 2" Tapered (Right Hand) R. E. RIDER (EURO) MANUAL No. 09

4 FRONT END, STEERING MANUAL No R. E. RIDER (EURO)

5 FRONT END, STEERING STEERING WHEEL (for 5/8 shaft) (includes item 2) LOGO, Steering Wheel 1-82 PIN, 1/4" x 1-1/2" Roll LATCH, Parking Brake CABLE, Clutch/Brake(54.2 ) (for 28 & 0 Decks) CABLE, Clutch (55 long) (for & 42 Decks) 9-02 WASHER, /8 Flat (2) PAD, Clutch/Brake Pedal BUSHING, Nylon PEDAL, Clutch/Brake (weldment) BEARING, Nylon (4) SHAFT, Steering (weldment) 1-21 BUSHING, Tie-Rod (4) TIE-ROD, Left Hand (.41 long) TIE-ROD, Left Hand (9.91 long) KING-PIN Weldment, Left Hand TIE-ROD, R. H. (.41 long) TIE-ROD, R. H. (9.91 long) KING-PIN, Weldment Right Hand WELDMENT, Front Axle, Narrow (28 & 0 Deck) WELDMENT, Front Axle, Wide ( Deck) FOOT PAD, Short (2) FOOT PAD, Long (2) SPRING, Parking Brake WASHER, 21/2 Dia. (2) BUSHING, Nylon (2) PIN, Hair 2 2- FOAM COVER, Steering Shaft PIN, /1 x 1" Cotter WASHER, /8 Flat (2) PIN, 1/8 Hair SPACER, 1/2" (5) RING, 1/2 External Retaining (Heavy Duty) RING, /4 Ext. Retaining (2) PIN, 1/8 x /4" Cotter (2) WASHER, 5/8 Flat () COVER, Steering Shaft SPACER, Pivot STUD, Shoulder (/8-24 Thread) NUT, /8-24 Hex Nyloc -248 CABLE, Brake (29 long) -414 CONNECTOR, Cable (2) SCREW, 1/4-20 x /4", Gr NUT, 1/4-20 Hex Center Lock PIN, /1" x 1-1/2" Cotter PIN, 5/2 x 1 Cotter (2) HOLDER, Wire- Bottle SCREW, #-24 x 1/2 Hex Washer Self-Tap (2) BOTTLE, Water PLATE, Thrust R. E. RIDER (EURO) 5 MANUAL No. 09

6 MAIN CASE B * * CONNECTS TO ITEM 15 ON PAGE 9 4B A A * NOTE: The heads of these fasteners are located underneath the main case MANUAL No. 09 R. E. RIDER (EURO)

7 2 29 SPRING (2-292) PART OF ITEM 1 MAIN CASE WELDMENT, Main Case * WELDMENT, Main Case 2A -098 BUMPER, Rear (2) 2B - BUMPER (1-piece) ( Deck) -285 FENDER, Left Hand 4A -419* GUIDE, Belt 4B 1-5 GUIDE, Belt BRACKET, Drive Support BOLT, 5/1-18 X /4" Hex Flange Lock, Grade 5 (2) CAP, Bumper (2) NUT, 5/1-18 Hex Fl. Lock () NUT, 5/1-24 Hex Flange Lock 2- LINK, Shift (Long) ARM, Shift -99 BRACE, Cross LINK, Shift (Short) NUT, 5/1-18 Hex, Gr. 5 or B ARM, Shift Handle (weldment) SPRING, Shift Handle ASSEMBLY, Shift Detent (Incl. Spring, part no ) HANDLE, Shift (weldment) HAIRPIN, /2 X 1-1/2" (2) GRIP, Shift Handle WING, Rear (2) BUSHING, Pilot 2-5 BRACKET, Switch PIN, /2 x /4" Cotter PIN, 1/4 x 1-/4" Tapered Clevis BUSHING, Nylon 2 - WASHER, Thrust (2) BUSHING, Nylon (2) SCREW, 5/1-18 x 5/8" Self Tap (14) SCREW, #-2 x 1/4" Hex Washer Self-Tap (2) WASHER, 5/1" Flat (4) CLIP, Wire WASHER, 5/1 Internal Tooth Lock SCREW, 5/1-18 x 1-1/2" (4) SCREW, 5/1-24 x 1-1/2" Hex Head Cap, Grade 5 (4) RETAINER, 5/1 Bolt (4) SCREW, 5/1-18 x /4" Cap SCREW, 5/1-18 X /4" Hex Self-Tap (4) SWIVEL (2) COVER, Switch COVER, Solenoid (Kohler) COVER, Battery FASTENER, 1/4 Ratchet () BOLT, 5/1-18 Shoulder LEVER, Over-Ride WASHER, /1 Flat NUT, 5/1-18 Nyloc OIL DRAIN, Short ASSEMBLY, Oil Valve PLATE, Engine (Kohler engine) WASHER, 5/1 Split Lock (8) BOLT, M x 25mm, Self- Tap (Kohler) SCREW, 5/1-24 x 1 Gr. 5 (4) NUT, 5/1-24 Hex, Grade 5 (8) *E1522KVE Model only R. E. RIDER (EURO) MANUAL No. 09

8 DIFFERENTIAL, R. H. FENDER A MANUAL No R. E. RIDER (EURO)

9 DIFFERENTIAL, R. H. FENDER COLLAR, Lock (Includes P.N Set screw) BALL BEARING, Axle (R. H. Fender) ( Models 1, 14, 15 HP) 2A BEARING, Axle (R. H. Fender) (25 & 28 Models 8, & 1HP) NUT, 5/1-24 Hex Flange Lock 4-9 WASHER, Thrust 5-80 PLATE, Differential SPACER, Pinion (4) 2-1 GEARS, Differential Pinion WASHER, Thrust ASSEMBLY, Drive Hex Tube WASHER, Hex Nylon Splash GEAR, 11 Teeth- Pitch CHAIN, 4 Pitch (#5) SPROCKET RING, Retaining SPACER CLAMP, Boot (2) BOOT, Oil Seal PLUG, Oil Fill & Check CASE, Transmission GASKET, Transmission Case FENDER, Right Hand ( Ball Bearing Differential Models) (2.498 hole) FENDER, Right Hand (25 & 28 Bushing Differential Models) (1.2 hole) GEAR, Teeth- Pitch 2 4- AXLE, Long (Includes Gear) (Use Only With Short Axle P.N. 5-98) SPACER AXLE, Short (Includes Gear) (Use Only With Long Axle P.N. 4-) SCREW, 5/1-24 x 1-5/8" Hex Cap Special Lock (4) O-RING, 5/1 (2) WASHER, Belleville (2) WASHER, 5/1 External Tooth Lock WASHER, 5/1 Flat BOLT, 5/1-24 x 2-5/8" Idler SCREW, 5/1-18 x 5/8" Self-Tapping (11) 9-02 SCREW, 1/4-20 x 5/8" Self-Tapping (1) 4-2 SPACER, Short Axle 5-1 GREASE, Transmission (24 oz. Required) KIT, Differential (Includes items 2A & -280 Fender) KIT, Differential (Includes items 2 & -95 Fender) R. E. RIDER (EURO) MANUAL No. 09 9

10 CHAIN CASE, L. H. FENDER ASSEMBLY MANUAL No. 09 R. E. RIDER (EURO)

11 CHAIN CASE, L. H. FENDER ASSEMBLY, Chain Case (Includes Items 2 Thru 1,15,1, & 1 Thru ) CASE, Sprocket 2-81 GASKET, Case Cover WASHER, Belleville (2) BEARING, Ball (2) 1-89 SPROCKET & SHAFT KEY, 1/8 x 5/8" Woodruff 8-98 COVER, Chain Case BEARING, Needle (2) 1-8 WASHER, Nylon Thrust (2) HUB & SPROCKET CHAIN SCREW, #-24 x 5/8" Hex Washer Self-Tap () PLUG, Oil Fill & Check ROLLER RING, 1/2 External Retaining (Heavy Duty) FENDER, Left Hand (25 & 28 Models) (1.28 I. D. hole) FENDER, Left Hand ( Models) (1.44 I. D. hole) COLLAR, Lock (Includes P.N. 9-0 Set Screw, 1/4-20 x 1/4") (Used with ball bearing, item 2, only) BEARING, Left Hand Fender (Includes Item 20) (25 & 28 Models, 8,, 1 HP) FITTING, Lube ROD, Cross-Tie CLAMP, Boot (2) BOOT, Oil Seal WASHER, Thrust Nylon WASHER, Thrust NUT, 5/8-18 Hex Nyloc NUT, 5/1-24 Hex Flange Lock O-RING (2) SPACER WASHER, Shim (As Required) WASHER, Shim () BALL BEARING, Left Hand Fender ( Models) ASSEMBLY, Left Hand Fender (Includes Fender P.N & Bearing P.N ) ( Models, 15 HP) -1 GREASE, Transmission (Use 2 oz. maximum) NOTE: See Pages & 1 For Illustration Of Brake Lever Assembly & Related Parts. R. E. RIDER (EURO) MANUAL No

12 SMOOTH CLUTCH ASSEMBLY See page, Item MANUAL No. 09 R. E. RIDER (EURO)

13 SMOOTH CLUTCH ASSEMBLY NOTE: Brake Return Replacement Kit (-119) is made up of items 11 and ASSEMBLY, Smooth Clutch (Includes Items 2 thru ) HUB, Driven Disc (assembly) 5- DISC, Driven (rubber tire bonded to rim) WASHER, Thrust 5-21 PLATE, Drive Disc NUT, 5/1-18 Hex Flange Lock (4) ASSEMBLY, Brake Lever (Includes Brake Lining & Rivet) RING, /8 External Retaining NUT, 1/4-28 Hex Top Lock 9-94 WASHER, 1/4 Flat SPACER SCREW, 1/4-28 x 1" Hex Head Cap, Grade 5 (washer face) SPRING, Brake Return SPRING, Clutch Brake LIFT, Yoke BEARING, Yoke (2) NUT, 5/1-24 Hex Center Lock (2) SCREW, 5/1-24 x 1" Hex Head Cap, Grade 5 (2) SCREW, /8-1 x 5/8" Hex Washer Self-Tap COLLAR, Yoke WASHER, 5/1 Flat (2) 22 - ARM, Yoke SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap (2) STUD (/8-24 thread) WASHER, /8 Internal Tooth NUT, /8-24 Hex, Grade 5 or B BRACKET, Slide PIN, /2 x /4 Cotter SLIDE HALF (2) BOLT, 5/1-18 Shoulder WASHER, 5/1 Split Lock NUT, 5/1-18 Hex, Grade 5 or B 9-02 WASHER, /8 SAE Flat (2) ASSEMBLY, Leaf Spring R. E. RIDER (EURO) MANUAL No. 09 1

14 CUTTING DECKS, DEFLECTORS SILHOUETTE OF RAILS & LIFT ARMS ASSEMBLY (See Pages 1 & 1) MANUAL No. 09 R. E. RIDER (EURO) 14

15 CUTTING DECKS, DEFLECTORS 1-44 COVER, Spindle DECK, 28 Replacement (Painted deck with decals) DECK, Replacement (Painted deck with decals) 5-8 DEFLECTOR, Discharge (28" & " Deck) (Includes Items 4, 5,, & ) DECAL, DANGER (Cut Finger) 5-80 HINGE, Deflector 1-41 SPRING, Hinge 2-24 PIN, Hinge NUT, 5/1-18 Hex Flange Lock NUT, 1/4-20 Hex Flange Lock 2-48 NUT, Push (2) BOLT, /8-1 x /4 Hex Flange Lock () 9-15 SCREW, 1/4-20 x -1/2 Hex Washer Self-Tap, Gr. 5 (2) WASHER, 5/1 Flat (2) BOLT, 1/4-20 x 1/2 Hex Flange Lock KIT, Air Lift (28 & " Models) (Includes 1 Thru 19) 1-2 AIR-LIFT (2) (" Models) SCREW, 5/1-24 x 11/1" Machine () WASHER, 5/1-24 Internal Tooth Lock () NUT, 5/1-24 Hex () SCREW, 1/2-20 x 1" Hex Head Cap, Grade 5 (2) WASHER, 1/2 Internal Tooth Lock (2) NUT, 1/2-20 Hex Jam (2) BOLT, 5/1-18 x /4" Short Neck Carriage, Grade 5 (2) SCREW, 1/4-20 x 5/8" Hex Self-Tap w/ Captured Washer (4) BOLT, 5/1-18 x 1/2" Hex Flange Lock () COVER, 28" Mulcher COVER, " Mulcher NUT, /18-1 Hex Flange Lock (9) NUT, /8-24 Hex Nyloc () SCREW, 8-24 x -/4 Hex Head Cap, Grade 5 () WHEEL, Gage () SPACER () 2-50 BRACKET, Gage Wheel (Front) -51 BRACKET, Gage Wheel (Rear) (2) BOLT, 5/1-18 x 1/2" Short Neck Carriage, Grade 5 () NUT, 5/1-18 Hex Flange Lock (8) NUT, 5/1-18 Wing (2) BLADE, 28" Mulcher BLADE, Mulcher " BLADE " BLADE BLADE, Ninja, BLADE, Ninja, R. E. RIDER (EURO) MANUAL No

16 RAILS, LIFT ARMS, CAM LIFT CABLE, NO REVERSE IN MOW (SEE PAGE 20, ITEM 11) MANUAL No R. E. RIDER (EURO)

17 RAILS, LIFT ARMS, CAM LIFT HAIRPIN, /2 X 1-1/2 (2) SWIVEL (2) HOOK, Chain (2) NUT, 5/1-24 Hex (2) NUT, /8-24 Hex Nyloc 9-02 WASHER, /8 Flat -421 PIVOT, Leveling ARM, Rear Lift (weldment) SCREW, /8-24 X 1-/4 Hex Head Cap Grade WASHER, 1/2 Flat (2) LEVER, Height of Cut NUT, /8-24 Hex Center Lock SPRING, Lever RING, Blue (2) GUIDE, Belt SPRING, Assist (2) BRACE, Top ROD, Leveling SCREW, 5/1-18 x 5/8" Self-Tap ASSEMBLY, Clutch Plate RAIL, Deck Lift, Right Hand RAIL, Deck Lift, Left Hand DETENT, Height Adjust SCREW, /8-1 x 1" Hex Washer Self-Tap (2) DETENT, Spacer SCREW, /8-1 x 5/8" Hex Washer Self-Tap () GRIP, Height Adjustment Lever RING, Red (2) ARM, Front Lift ARM, Front Lift (Weldment) PIN, 1/8 x /4" Cotter ROD, Support (Front Lift Arm to Front End) 1-84 SNAP RING, / SCREW, 5/1-18 X 1/2 Hex Washer Self-Tap (2) SPACER, Deck Lift (2) BOLT, #-24 x 1 Flat Head Square Neck 9-90 NUT, #-24 Hex Nyloc ANCHOR SCREW, 5/1-24 x /4 Hex Head Cap, Grade 5 (2) WASHER, 5/1 Internal Tooth Lock (2) R. E. RIDER (EURO) MANUAL No. 09 1

18 BLADE STOP PEDALS PEDAL, Blade Stop Control 2-59 SPRING, Latching SPRING, Pedal BOLT, /8-24 Shoulder, Grade BOLT, /8-24 x 9/1" Shoulder 1-20 WASHER, Cone 1/2 I. D NUT, /8-24 Hex, Grade B WASHER, 1/2 Flat (2) NUT, /8-24 Hex Center Lock NUT, 1/4-20 Hex Flange Lock, Grade CABLE, No Reverse In Mow -21 CLIP, Cable BOLT, 1/4-20 x /4 Square Neck Carriage, Grade 5 MANUAL No. 09 R. E. RIDER (EURO) 18

19 1 ASSEMBLY SPINDLE 2 5 NOTE: Spindle housing assembly, Part no includes Items 4 and ASSEMBLY, Spindle Housing (Includes Items 2 Thru 1) RING, 1.85 Internal Retaining (2) 1-1 BEARING, Spindle (2) WELDMENT, Spindle Housing FITTING, Lube (for /1 diameter hole) SPINDLE, Rider (.2 overall length) WASHER, /4 Shim WASHER, Spindle 9-51 HOLDER, Blade SPACER, Blade Centering NUT, 5/8-18 Hex Center Lock SCREW, 1/2-20 x 1-1/4 Hex Head Cap, Grade 5 (2) NUT, 1/2-20 Hex Jam (2) 11 R. E. RIDER (EURO) MANUAL No

20 BELTS, BRAKES, INTERLOCK * * SEE PAGE 1, ITEM MANUAL No R. E. RIDER (EURO)

21 BELTS, BRAKES, INTERLOCK * BELT, Drive, ( Deck) (.5 AA Section) * BELT, Drive (28 & 0 Deck) (2.5 AA Section) 2-44 NUT, /4-1 Hex Jam, Grade WASHER, 49/4 I.D. x 1-1/2 O.D. Flat (2) PULLEY, Spindle HUB, Pulley 9-99 NUT, /8-1 Nyloc (2) PULLEY, 4 Idler (2) SCREW, /8-1 x 1-1/2 Hex Head Cap, Grade 5 (2) BRACKET, Fixed Idler ( Models Only) -52 BRACE, Fixed Idler Bracket ( Models Only) SCREW, 5/1-18 x 1/2 Hex Washer Self-Tap (5) 4-5 HANDLE, Blade Engage (Flip) RING, 2 External Retaining (2) PIN, /2 x /4 Cotter () SPRING, Extension, 4 x 1/2 Diameter ARM, Idler (weldment) SPACER GRIP, Handle WASHER, /8 Flat (2) DRUM, Brake PIN, 1/4 x 1-5/8 Clevis BAND, Brake WASHER, /8 Flat (2) WASHER, 1/4 Flat (4) EYE-BOLT, 1/4-20 x SPRING, Flip Handle PIN, /1 x 1 Clevis HANDLE, Blade Lever (ON-OFF) (weldment) SPRING, Blade Handle ROD, Idler SCREW, #-2 x 1 Hex Washer Self-Tap SWITCH, Deck Interlock (NO) MOUNT, Handle/Switch SCREW, 1/4-20 x 5/8 Hex Washer Self-Tap (2) PIN, /2 x 1/2 Cotter 9-01 NUT, 1/4-20 Hex Top Lock 1-44 BUSHING SPRING RESTRICTOR, Belt * NOTE: Belt part numbers appear on belts. R. E. RIDER (EURO) MANUAL No

22 DRIVE DISC ASSEMBLY WELDMENT, 5.25 O.D. Drive Disc (" Models) WELDMENT, 5.5 O.D. Drive Disc (28, 0 & 42 Models) SCREW, /8-1 x /8 Set (2) 1-02 KEY, 1/4 Square x 2 MANUAL No. 09 R. E. RIDER (EURO) 22

23 FUEL TANK & OPERATORS SEAT 1 2 A SEAT, Operator (, 14.5 & 15HP Models) (shown) SEAT, Operator (9 & HP Models) (not shown) ASSEMBLY, Fuel Tank (9 & HP Models) (Includes Item ) ASSEMBY, Fuel Tank with Gauge (, 14.5 & 15HP Models) (Incl. Item A) CAP, Fuel Tank A 1-9 CAP, Fuel Tank (With Gauge) 4-22 HOSE, Fuel (8-1/2" Long) (Briggs & Stratton: 8HP thru 14HP) HOSE, Fuel (-1/2 Long) (Kohler Only!) FILTER, Fuel (In-Line) CLAMP, Fuel Line (4) - BRACKET, Fuel Tank (Rear) SCREW, 5/1-18 x 5/8" Pan Head Self-Tap (Torx #T-40) (2) KNOB, Seat Adjusting (2) SPACER, 5/1 (2) VALVE, Fuel Shut-Off (Accessory) 9-8 BOLT, 5/1-18 x 1/2" Hex Flange Lock w/nylon Patch (2) SWITCH, Seat (Normally Closed) HOSE, Fuel (-1/2 Long) R. E. RIDER (EURO) MANUAL No. 09 2

24 ENGINES & EXHAUST MUFFLER ENGINE H.P. START TYPE ENGINE MFGR. MFGR. MODEL MFGR. TYPE.0 ELECTRIC BRIGGS & STRATTON C.A.R.B. 28B0 112-E1.0 ELECTRIC BRIGGS & STRATTON C.A.R.B E ELECTRIC KOHLER CV15ST PS MUFFLER (B&S 9-1 HP) (Includes items 8 & 9) SCREW, 5/1-18 x /4 (2) SCREW, 1/4-20x1-1/4 Hex MUFFLER (Kohler 14/15 HP) WASHER, 1/4 Split Lock SPACER (2) 9-5 NUT, 1/4-20 Hex Flange Lock DEFLECTOR, Heat SCREW #8-18x/8 Type AB 9-94 WASHER, 1/4 Flat SCREW, 1/4-20 x /4 Hex 2-45 GUARD, Muffler (Kohler) 1-54 BRACKET, Muffler Guard (Kohler) SCREW, 1/4-20 x 1 Hex SCREW, 1/4-20 x 5/8 Hex Head Self-Tap (2) BRACKET, Heat Shield SCREW, 5/1-18 x HEAT SHIELD BRACKET, Heat Shield, Front SCREW, 1/4-20 x /8 () MANUAL No

25 THROTTLE CONTROL CONTROL, Throttle (2. long) (Briggs Engines) CONTROL, Throttle (4. long) (Kohler Engine) SCREW, 1/4-20 x 1/2 Hex Washer Self-Tap (2) -40 PLATE, Throttle Control SCREW, #-24 x 1/2 Hex Washer Self-Tap (Torx) (2) R. E. RIDER (EURO) MANUAL No

26 DECALS 1 EUROPEAN DECALS DECAL, Brake Operation (German) DECAL, Brake Operation (French) DECAL, Brake Operation (Dutch) DECAL, WARNING DECAL, European Noise Control -59 DECAL, SAFETY Instruction (German & French) 2-9 DECAL, European Community DECAL, Deflector (German & French) DECAL, Battery Storage DECALS (Continued On Next Page) MANUAL No R. E. RIDER (EURO)

27 EUROPEAN DECALS DECALS DECAL, SAFETY Instruction (English & Dutch) DECAL, DO NOT OPERATE! DECAL, Clutch/Brake DECAL, Battery CAUTION DECAL, Patent Numbers DECAL, Deflector CAUTION (English & Dutch) DECAL, 28 Inch (Hi-Vac) DECAL, Inch (Hi-Vac) DECALS (Continued On Next Page) R. E. RIDER (EURO) MANUAL No. 09 2

28 DECALS DECAL, Back-Up Recoil ( Kohler Engine Models) DECAL, OHV ( Kohler Engine Models) DECAL, Snapper DECAL, Brake Operation (Italian) DECAL, Brake Operation (Spanish) * -4 DECAL, Year Of Manufacture (2001) DECAL, Height of Cut MANUAL No. 09 DECALS (Continued On Next Page) 28 R. E. RIDER (EURO)

29 DECALS DECAL, CAUTION, Fuel DECAL, CAUTION, Fuel Leakage (Dutch) DECAL, CAUTION, Fuel Leakage (German) DECAL, CAUTION, Fuel Leakage (French) DECAL, CAUTION, Fuel Leakage (Italian) DECAL, CAUTION, Fuel Leakage (Spanish) 0-20 DECAL, Safety Instructions (Spanish/Italian) DECAL, No Mow in Reverse TAG, Caution 2 R. E. RIDER (EURO) MANUAL No

30 ELECTRICAL SYSTEMS (For 8,, & 1 HP Briggs) TO ITEM 8 J I TO ITEM 2 TO ITEM H G TO ITEM (D, E, F) TO ITEM (A) 24 TO ITEM 11 1 TO ITEM 4 20 L H K L G. MAGNETO SHORTING BLOCK (See Inset on Page 1) 21 L M L 18 H. ENGINE GROUND I. ALTERNATOR CHARGING WIRE 1 J. STARTER TERMINAL M TO ITEM 5 G K 1 MANUAL No. 09 R. E. RIDER (EURO) 0

ELECTRICAL SYSTEMS (For 8,, & 1 HP Briggs) 1-05 KIT, Volt Dry Charge Battery 2 1-881 SOLENOID 2-288 HARNESS, Starter Wiring (Briggs Engines) 4 1-929 HARNESS, Ignition Wiring (Briggs Engines) 5 1-18

31 ELECTRICAL SYSTEMS (For 8,, & 1 HP Briggs) 1-05 KIT, Volt Dry Charge Battery SOLENOID HARNESS, Starter Wiring (Briggs Engines) HARNESS, Ignition Wiring (Briggs Engines) HOLDER, Fuse (Includes Fuse) FUSE ( AMP) 2-80 INTERLOCK Module (Briggs) 2-88 HARNESS (Deck Interlock Wiring) SWITCH, Deck Interlock (NO) COVER, Battery Cable 1-92 CABLE, Positive (1 Long, Red) SWITCH, Ignition (Used With Electric Start) WASHER, 5/8 Internal Tooth Lock NUT, 5/8-2 Hex KEY, Switch (2) SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap () SWITCH, Operator Presence Control (OPC) Traction (NC/NO) NUT, 1/4-20 Hex, Grade 5 or B (5) WASHER, 1/4 Internal Tooth Lock (2) SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2) CABLE, Negative (15 Long) HARNESS, Operator Presence Control (OPC) Wire RETAINER, 1/4 Bolt (2) TIE, " Long Cable (2) NUT, 1/4-20 Hex Center Lock (2) TIE, 2" Long Cable SWITCH, Seat (8,, & 1 HP Engines) (NC) R. E. RIDER (EURO) MANUAL No. 09 1

32 ELECTRICAL SYSTEMS (For 14 & 15 HP KOHLER) 8 TO ITEM TO ITEM 2 25 TO ITEM TO ITEM 4 H TO ITEM (D, E, F) TO ITEM (A) 1 G 24 TO ITEM 11 L I 2 J 4 1 L H. ENGINE GROUND I. BATTERY GROUND (See Inset on Page ) 21 L 15 2 M L J. STARTER TERMINAL K ENGINE MOUNTING PLATE M TO ITEM 5 K 1 2 MANUAL No. 09 R. E. RIDER (EURO) 2

33 ELECTRICAL SYSTEMS (For 14 & 15 HP KOHLER) 1-05 KIT, V Dry Charge Battery SOLENOID HARNESS, Starter Wiring (Kohler) HARNESS, Ignition Wiring (Kohler) HOLDER, Fuse (Includes Fuse) 1-19 FUSE ( AMP) 2-80 INTERLOCK Module (Briggs & Kohler) 2-88 HARNESS, (Deck Interlock Wiring) SWITCH, Deck Interlock (NO) COVER, Battery Cable 1-92 CABLE, Positive (Red) (1 Long) SWITCH, Ignition WASHER, 5/8 Internal Tooth Lock NUT, 5/8-2 Hex KEY, Switch (2) SCREW, 1/4-20 x 1/2" Hex Washer Self-Tap () TIE, 2" Long Cable NUT, 1/4-20 Hex (4) WASHER, 1/4 Internal Tooth Lock (2) SCREW, 1/4-20 x 5/8" Hex Head Cap, Grade 5 (2) CABLE, Negative (15 Long) HARNESS, Operator Presence Control Wire NUT, 1/4-20 Hex, Grade 5 or B TIE, " Long Cable (2) NUT, 1/4-20 Hex Center Lock (2) RETAINER, 1/4 Bolt (2) SWITCH, Seat (NC) SWITCH, Operator Presence Control (OPC) Traction (NC/NO) R. E. RIDER (EURO) MANUAL No. 09

34 WIRING SCHEMATICS WIRING SCHEMATIC FOR 8,, & 1 HP BRIGGS ENGINES MANUAL No R. E. RIDER (EURO)

35 WIRING SCHEMATICS WIRING SCHEMATIC FOR 14 & 15 HP KOHLER ENGINES R. E. RIDER (EURO) MANUAL No. 09 5

36 ACCESSORIES & ATTACHMENTS SNAPPER REAR ENGINE RIDER ACCESSORIES* PART NO. DESCRIPTION OF KIT MODELS USED ON Wheel Weight (8 Wheels)...All Rear Engine Riders Dump Cart...All Rear Engine Riders Gage Wheel...All Deck Rear Engine Riders Single Bag Catcher...All 25 Deck Rear Engine Riders Single Bag Catcher...All 28 & Deck Rear Engine Riders Twin Bag Catcher...All 28 & Deck Rear Engine Riders Bag-N-Wagon...All 28 & Deck Rear Engine Riders Thatcherizer...All Series & Newer Riders Wagon Cover...All 28 & Deck Rear Engine Riders Weight (Front)...All Series & Newer Riders Dozer Blade ( Blade)...All Rear Engine Riders Tire Chains (Tires-1 x.50-8)...all Rear Engine Riders Tire Chains (Tires-1 x )...All Rear Engine Riders Ninja Recycling (Cover)...All 25 Deck Rear Engine Riders Ninja Recycling (Cover)...All 28 Deck Rear Engine Riders Ninja Recycling (Cover)...All Deck Rear Engine Riders Drive Disc Puller...All RER Aluminum Drive Discs *For illustrated parts lists of kits see Manual #0084. MANUAL No. 09 R. E. RIDER (EURO)

37 HARDWARE BAGS LOCATION HARDWARE BAG (includes items listed below) (models: E2822BE & E2822BE) PLUG, Oil Fill & Check (2)... page 8, item 18 & page, item BUSHING, Tie Rod page 5, item SPACER, 21/4 (2)... page 2, item PIN, 1/4 x 1-1/2 Roll... page 4, item 5 2- FOAM COVER, Steering Shaft... page 4, item 2-1 COVER, Steering Shaft... page 4, item NUT, 1/4-20 Hex Center Lock (2)... pg. 0 & 2, item BOLT, 5/1-18 x 1/2 Hex Flange Lock (2)... page 2, item WASHER, /8 Flat... pages 5, 1, 1 & PIN, /1 x 1 Cotter... page 5, item PIN, 5/2 x 1 Cotter (2)... page 2, item 11 & page 5, item SEAT SWITCH (NC)... page 2, item KNOB, Three-Prong (2)... page 2, item SPACER, Pivot (2)... page 5, item SCREW, #-24 x 1/2 Self-Tap (2)... pages 5 & 25 LOCATION HARDWARE BAG (includes items listed below) (model: E1522KVE) PLUG, Oil Fill & Check (2)... page 8, item 18 & page, item SPACER, 21/4 (2)... page 2, item 1-82 PIN, 1/4 x 1-1/2 Roll... page 4, item 4 2- FOAM COVER, Steering Shaft... page 4, item COVER, Steering Shaft... page 4, item NUT, 1/4-20 Hex Center Lock (2)... pg. 0 & 2, item BOLT, 5/1-18 x 1/2 Hex Flange Lock (2)... page 2, item 8 1- BUSHING, Tie Rod... page 5, item WASHER, /8 Flat... pages 5, 1, 1 & PIN, /1 x 1 Cotter... page 5, item SEAT SWITCH (NC)... page 2, item KNOB, Three-Prong (2)... page 2, item SCREW, #-24 x 1/2 Self-Tap (2)... pages 5 & PIN, 5/2 x 1 Cotter (2)... page 2, item 11 & page 5, item 28 R. E. RIDER (EURO) MANUAL No. 09

38 NOTES 8

39 NOTES 9

Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO.

40 Parts Manual for REAR ENGINE RIDER EUROPEAN SERIES 22 MODELS E2822BE E2822BE E1522KVE IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 2002 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No. 09 (Rev. 1, 0/0/02) Printed in U.S.A. 40

EUROPEAN REAR ENGINE RIDER SERIES 20

Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,