LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F

Transcription

1 Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 1999 SNAPPER INC. ALL RIGHTS RESERVED (Rev. 1, 06/05/03) MANUAL No

2 2

3 CONTENTS GROUP PAGE HOOD, BUMPER, HEADLIGHTS & COMPONENTS STEERING WHEEL, CONSOLE, FUEL TANK SEAT, REAR FENDER & COMPONENTS CAST FRONT AXLE WHEELS, FRONT & REAR TRANSMISSION GROUP (HYDRO DRIVE) FRAME, CLUTCH, BRAKE & STEERING COMPONENTS BLADE ENGAGEMENT & TRANSMISSION CONTROLS CUTTING DECK (Belt, Blade Brake Shown on Page 27) CUTTING DECK SUB-ASSEMBLY (5-7821) CUTTING DECK, BELTS, BRAKES SPINDLE ASSEMBLY - 42 CUTTING DECK...26 BELT, BLADE BRAKE - 42 CUTTING DECK DECK, IDLER ASSEMBLIES IMPLEMENT LIFT PARTS...30 SPINDLE ASSEMBLIES- 48 CUTTING DECK...31 ENGINE COMPONENTS (Model: LT160H42GBV) ENGINE COMPONENTS (Model: LT160H42GBV2) ENGINE COMPONENTS (Model: LT180H48GBV2) ELECTRICAL - (Model: LT160H42GBV)...38 ELECTRICAL - (Models: LT160H42GBV2 & LT180H48GBV2)...39 ELECTRICAL COMPONENTS HYDRO RESERVOIR ASSEMBLY...41 DECALS HYDRO LAWN TRACTORS SERIES F MANUAL No

4 HOOD, BUMPER, HEADLIGHTS & COMPONENTS NOTE: FOR ORDERING LT160H42FBV2 HOOD ASS Y, USE P.N (ORDER SNAPPER & TRIM DECALS SEPARATELY). 21 FOR ORDERING LT160H42FBV HOOD ASS Y, USE P. N (ORDER SNAPPER & TRIM DECALS SEPARATELY). MANUAL No HYDRO LAWN TRACTORS SERIES F 4

5 HOOD, BUMPER, HEADLIGHTS & COMPONENTS ITEM PART NO. DESCRIPTION 1A HOOD, Mozart (with Scoop) (Models: LT160H42FBV2 & LT180H48FBV2) 1B HOOD, Mozart (Model: LT160H42FBV) ROD, Hood Support LATCH, Spring SCREW, 1/4-20 x 5/8 Truss Head, Torx (2) NUT, 1/4-20 Hex Nyloc (6) DECAL, SNAPPER, 8 Molded Logo BOLT, 1/4-20 x 5/8 Flat Head Carriage (4) PANEL, Hood (Left Hand) PANEL, Hood (Right Hand) DECAL, Hood (Right Hand) (Model:LT160H42FBV) DECAL, Hood (Left Hand) (Model: LT160H42FBV) DECAL, Hood (Right Hand) (Model: LT160H42FBV2) DECAL, Hood (Left Hand) (Model: LT160H42FBV2) DECAL, Hood (Right Hand) (Model: LT180H48FBV2) DECAL, Hood (Left Hand) (Model: LT180H48FBV2) RIVET, 1/8 Pop (8) SCREW, M4.8 x 1.59 x 16.00mm, Special (5) GRILLE, Hood CLIP, J DECAL, Molded Medallion LENS, Grille (Headlights) DECAL, Reflect (Left Hand) DECAL, Reflect (Right Hand) DECAL, SNAPPER, 4 Molded Logo (Silver Letters - Blue Stripe) SCREW, 5/16-18 x 1/2 Self-Tapping (4) BOLT, Shoulder, 3/8-16 x 1-1/4 Hex Socket, Torx (2) BRACE, Hood Support RETAINER, 5/16 Bolt BULB, Headlights (2) SOCKET, Headlight Bulb (2) HARNESS, Headlight Wiring PLENUM (Models: LT160H42FBV2 & LT180H48FBV2 Only!) FOAM, 2 x 2 x 3.5 (Models: LT160H42FBV2 & LT180H48FBV2 Only!) FOAM, 1/2 x 3/4 x (Models: LT160H42FBV2 & LT180H48FBV2 Only!) HYDRO LAWN TRACTORS SERIES F MANUAL No

6 STEERING WHEEL, CONSOLE, FUEL TANK 37 MANUAL No HYDRO LAWN TRACTORS SERIES F

7 STEERING WHEEL, CONSOLE, FUEL TANK ASSEMBLY, Console (Includes 2 thru 7) (all models) CONSOLE RETAINER, 5/16 Bolt (4) SCREW, 1/4-20 x 3/4 Hex Head Cap, Grade 5 (2) ASSEMBLY, Strap-Clinch Stud (2) NUT, 1/4-20 Hex Nyloc (2) ASSEMBLY, Flange Bearing NUT, 5/16-18 Hex Center Lock, Grade B or 5 (4) GEAR, Pinion, Steering Shaft PIN, Dowel, 1/4 x 1-1/ TIE, Wire (Models: LT160H42FBV2 & LT180H48FBV2 Only) ASSEMBLY, Fuel Tank (Includes item 13) CAP, Fuel Tank NUT, #10-24 Hex Nyloc (2) KEY SWITCH (Includes item 27) NUT, 5/16-18 Hex Flange Lock BRACKET, Hood Latch Catch SHAFT, Steering ROLL-PIN, 1/4 x 2-1/ LIGHTS, Indicator (Models: LT160H42FBV2 & LT180H48FBV2 Only!) STEERING WHEEL DECAL, Console (Model: LT160H42FBV) DECAL, Console (Models: LT160H42FBV2 & LT180H48FBV2) KEY, Special (With Cover) SCREW, 5/16-18 x 5/8 Truss Head, Torx SWITCH, Lights SPACER (Models: LT160H42FBV & LT160H42FBV2 Only) NUT, 5/8-32 Hex BEZEL SCREW, #10-24 x 5/8 Machine (2) NUT, #8-32 Hex, Grade 2 or B HANDLE, Throttle Control CONTROL, Throttle (Model: LT160H42FBV) CONTROL, Throttle (Models: LT160H42FBV2 & LT180H48FBV2) SCREW, #8-32 x 3/8 Cross-Recessed, Fillester Head, Grade SWITCH, PTO CABLE, Choke (Models: LT160H42FBV2 & LT180H48FBV2 Only!) LENS, Indicator Light (Models: LT160H42FBV2 & LT180H48FBV2 Only!) BEARING, 3/4 I.D. HYDRO LAWN TRACTORS SERIES F MANUAL No

8 SEAT, REAR FENDER & COMPONENTS MANUAL No HYDRO LAWN TRACTORS SERIES F 8

9 SEAT, REAR FENDER & COMPONENTS ASSEMBLY, Seat Support (Includes items 2, 3, 4, 5, & 6) SUPPORT, Seat SWITCH, Seat, Gray, (N.C.) SPRING, Cushion Holder (2) HOLDER, Cushion SWITCH, Seat, Black, (N.O.) KNOB, Seat Adjustment, 5/16-18 x 2 (2) SCREW, 5/16-18 X 5/8 Truss Head Torx (4) SCREW, 1/4-20 x 5/8 Hex Washer Head, Self-Tapping (4) PAN, Seat (Fender) RIV-NUT, 5/16-18 Round (2) DECAL - SNAPPER, 7.28 Molded Logo, Silver Letters & Blue Stripe DECAL - CAUTION, Battery Location SUPPORT, Fender SCREW, 5/16/18 x 5/8 Hex Washer Head, Swage Form SCREW, #10-16 x 1/2 Hex Washer Head, Self-Tapping (4) DETENT, Shift COVER, Shift DECAL, Shift Cover, 5-Speed BOLT, 5/16-18 x 1/2 Hex Flange Lock, Grade 5 (3) BRACKET, Seat Support ROD, Seat Hinge PIN, 3/32 x 1-1/2 Hair SEAT, Operator, V CUSHION, Seat (2) SCREW, x 1/2 (Torx) RECEPTACLE, Female Wire Harness Relay (Model: LT160H42FBV) RECEPTACLE, Female Wire Harness Relay (Models: LT160H42FBV2 & LT180H48FBV2) HYDRO LAWN TRACTORS, SERIES F MANUAL No

10 CAST FRONT AXLE MANUAL No HYDRO LAWN TRACTORS SERIES F 10

11 CAST FRONT AXLE RING, 5/8 External Retaining WASHER, 49/64 x 1-1/8 x 1/16 Flat FITTING, 3/16 Lube ARM, Steering AXLE, Cast SPACER, 25/64 x 1/2 x 1-13/16 (2) SPACER, Center WASHER, Thrust (2) BRACKET, Deck Hanger (2) BRACKET, Cast Axle (Rear) WELDMENT, Right Hand Spindle Wheel (Short) WELDMENT, Left Hand Spindle Wheel (Short) * BRACKET, Cast Axle Front (LT160HFBV2 & LT180H42FBV2) * BRACKET, Cast Axle Front (Model: LT160H42FBV Only) NUT, 3/8-16 Hex Nyloc (2) WASHER, 3/8 x 5/64 Flat (2) NUT, 5/16-18 Hex Center Lock (2) WASHER, 1/2 x 3/32 Flat (2) SCREW, 3/8-16 x 2-3/4 Hex Head Cap, Grade 2 (2) PIN, 1/4 x 1-1/4 Roll SCREW, 5/16-18 x 2-3/4 Hex Head Cap, Grade 5 (2) NUT, 1/2-13 Hex Nyloc SCREW, 1/2-13 x 3 Hex Head Cap Grade ASSEMBLY, Tie Rod (Includes items 24, 25, & 26) ROD, Steering Connector ROD END (2) NUT, 3/8-24 Hex Jam (2) SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade 5 (2) WASHER, 3/8 Split Lock (2) NUT, 3/8-16 Hex, Grade 5 (2) SPACER, Steering Stop BEARING, Sleeve (2) *NOTE: This assembly consists of a bracket and two installed clinch studs. HYDRO LAWN TRACTORS SERIES F MANUAL No

12 WHEELS, FRONT & REAR 10 MANUAL No HYDRO LAWN TRACTORS SERIES F 12

13 WHEELS, FRONT & REAR ASSEMBLY, Front Tire & Rim (Includes items 2, 3, 4, 5 & 6 ) (Models: LT160H42FBV & LT160H42FBV2) ASSEMBLY, Front Tire & Rim (Includes items 2, 3A, 4A, 5 & 6 ) (Model: LT180H48FBV2) TIRE, 15 x RIM, 6.00 x A RIM, 6.00 x 4.00 Grey BEARING, Wheel (4) 4A BEARING, Wheel (Heim) (4) VALVE, Air (Snap-in) (4) FITTING, Lube (2) WASHER, Flat, 5/32 x 25/32 I.D. x 1-1/2 O.D. (2) WASHER, Hub-Cap Retaining (4) WASHER, Flat, 1/16 x 49/64 I.D. x 1-5/16 O.D.(8) HUB-CAP (4) COTTER-PIN, 5/32 x 1 (2) RING, External Retaining, 3/4 (2) ASSEMBLY, Rear Tire & Rim (Includes items 5, 14, & 15A ) (Model: LT160H42FBV) ASSEMBLY, Rear Tire & Rim (Includes items 5, 14, & 15B) (Models: LT160H42FBV2 & LT180H48FBV2) RIM, 8 x A TIRE, 18 x B TIRE, 20 x HYDRO LAWN TRACTORS SERIES F MANUAL No

14 TRANSMISSION GROUP (Hydro Drive) MANUAL No HYDRO LAWN TRACTORS SERIES F 14

15 TRANSMISSION GROUP (Hydro Drive) ASSEMBLY, Transaxle, Tuff Torq (Models: LT160H42FBV & LT160H42FBV2) ASSEMBLY, Transaxle, Tuff Torq (Model LT180H48FBV2) ROD, Roll Release (K46) PIN, Clevis 1/4 x 5/ WASHER, 1/4 x 5/8 x 1/16 Flat (2) PIN, 3/32 x 1/2 Cotter BRACKET, Torque SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade WASHER, 5/16 x 11/16 x 1/16, Grade NUT, 3/8-16 Hex Center Lock SCREW, 5/16-18 x 3-1/4 Hex Head Cap, Grade 5 (4) WASHER, 5/16 Flat (4) SPACER, Hydro Axle- K NUT, 5/16-18 Hex Flange Lock Grade 5 (4) WASHER, Axle (2) WASHER, Thrust (2) SPACER, Axle (2) 17 *-- RING, E 15 (2) (Vendor # ) 18 *-- FAN (Vendor # 1A ) 19 *-- PULLEY, 4 Diameter (42 Deck) (Vendor # 1A ) *-- PULLEY, 4-1/2 Diameter (48 Deck) (Vendor # 1A ) 20 *-- WASHER, Wave (Vendor # 1A ) 21 *-- SPACER (Vendor # 1A ) BELT, Traction Drive (HA Section, Effective Length) KEY, 3/16 Square x 2-3/16 long (2) *NOTE Snapper numbers are not available for these items at this time. Order from Tuff-Torq (for Model K46) HYDRO LAWN TRACTORS SERIES F MANUAL No

16 FRAME, CLUTCH, BRAKE & STEERING COMPONENTS MANUAL No HYDRO LAWN TRACTORS SERIES F 16

17 FRAME, CLUTCH, BRAKE & STEERING COMPONENTS FRAME, Tractor (1 piece) TIE, Wire ROD END (2) NUT, 3/8-24 Hex Jam (2) SCREW, 3/8-24 x 1-1/4 HHC (2) LINK, Drag SPACER (4) NUT, 3/8-16 Hex Flange Lock ASS Y, Sector Gear (Incl Weldment & item 10) BEARING, Sector Gear (2) WASHER, 3/4 Thrust NUT, 1/4-20 Hex Flange Lock (6) BOLT, 1/2-13 x 2 Shoulder (2) NUT, 1/2-13 Hex Ctr. Lock, Gr. A BRACE, Sector Gear TIE, Cable NUT, 5/16-18 Hx. Flg. Lk., Gr 5 (4) PEDAL, Clutch Brake PAD, Pedal NUT, 3/8-16 Hex Nyloc WASHER, 3/8 Bright Zinc, Flat (2) SPRING, Brake SWIVEL, Inline Brake PIN, 3/8 x 1-7/32 Cotter (Self- Locking) (5) NUT, 5/16-18 Hex Center Lock (4) BUSHING, 7/16 I.D. (2) WASHER,.44 I.D. Flat WELDMENT, Brake Arm ARM, Speed Control (component of transaxle, page 14) ROD, Brake WASHER, 5/16 Flat WELDMENT, Pivot Shift Lever WASHER,.406 I.D. Flat (2) SCREW, 5/16-18 x 1-1/4 Grade WASHER, 5/16 Flat ASSEMBLY, Clutch/Brake Cable ASSEMBLY, Foot Shaft Pivot (Includes item 38) FITTING, Lube, 3/ WASHER, 1/2 Internal Tooth Lock 62B 21 *Used on 48 Deck Models 77 65B NUT, 1/2-13 Hex Flange Lock WASHER, 5/8 Flat (2) PIN, 3/16 x 1-1/2 Clevis BEARING, Flange WELDMENT, Clutch Brake Arm LATCH, Park Brake SCREW, 5/16-18 x 5/8 S.Tap (3) BOLT, 1/4-20 x 5/8 Carriage (6) SCREW, #10-32 x 5/8 H.W.H. (2) BUSHING, 1/2 Nylon (2) WASHER, 1/2 Flat (2) RING, 1/2 External Retaining (3) SCREW, 5/16-18 x 5/8 Truss (5) WASHER, 3/8 Yellow Zinc Flat (3) BRACKET, Pivot Mounting WASHER, 5/16 Nylon (2) KNOB, Clutch/Brake (5/16-18) NUT, 3/8-16 Hex, Grade B or ARM, Idler (Traction Drive) NUT, #10-32 Hex Nyloc (2) SWITCH, DPDT NC/NO SPRING, Traction Drive 62A BRACKET, Rear Lift/PTO Lever 62B * BRACKET, Rear Lift/PTO Lever 63A LINK, Lift (Models: LT160H42FBV & LT160H42FBV2) 63B * LINK, Lift SPACER (2) 65A BRACKET, Deck Hang Pivot 65B * BRACKET, Rear Hanger- LH 66A WELDMENT, Rear Lift 66B * WELDMENT, Rear Lift SCREW, 5/16-18 x 7/8 Truss Head (Torx) (2) PLATE, Lift Sector (2) EXTENSION, Idler Arm SCREW, 3/8-16 x 2-1/4 Cap Gr PULLEY, Flat Idler, 3.47 O.D GUIDE, Pulley (2) WASHER, 3/8 Split Lock 74A WASHER, Pivot, Stiffener 74B * BRACKET, Frame Brace * BOLT, 5/16-18 x 5/8 Short Neck Carriage, Grade 5 (2) * SCREW, 5/16-18 x 3/4 HWST (2) * COTTER PIN, 1/16 x 1-7/32 Self Lock BRACKET, Mounting Brace BOLT, 5/16-18 x 3/4 Carriage, (2) SCREW, 3/8-16 x 1-1/2 Cap, Gr PULLEY, Idler V 3.30 HA NUT, 3/8-16 Hex Center Lock LINK, Fwd/Rev BOLT, 1/2-13 x 3-7/8 Shoulder 63B 66B HYDRO LAWN TRACTORS, SERIES F MANUAL No

18 BLADE ENGAGEMENT & TRANSMISSION CONTROLS Ref: page 16, item 62A or 62B Ref: page 16, Item B 35A MANUAL No HYDRO LAWN TRACTORS SERIES F 18

19 BLADE ENGAGEMENT & TRANSMISSION CONTROLS FRAME, Tractor (1 Piece) * BRACE, Frame- 48 (2) * BOLT, 3/8-16 x 3/4 Hex Flange Lock (8) * GUIDE, Belt COTTER-PIN, 1/8 x 3/ WASHER, 1/2 Shim BOLT, 1/4-20 x 5/8 Short Neck Carriage, Grade ASSEMBLY, Steering Adjuster NUT, 1/4-20 Hex Flange Lock, Grade GEAR, Steering Pinion LEVER, Shift (Upper) SPRING, Shift Torsion Shift Lever KNOB, Deck Lift Lever WELDMENT, Shift Lever (Upper) WASHER, 1/4 Internal Tooth Lock (2) COTTER-PIN, 5/32 x WASHER, 1/4 Flat (2) NUT, 1/4-20 Hex Nyloc (2) SCREW, 3/8-16 x 1-1/2 Hex Head Cap, Grade WASHER, 3/8 Flat PULLEY, Idler GUIDE, Pulley Belt SCREW, 5/16-18 x 1-1/4 Swage (3) SUPPORT, PTO Lever NUT, 3/8-16 Hex Center Lock, Grade 5 (2) PIN, 5/16 x 1.73 Clevis SCREW, 5/16-18 x 1-1/4 Self-Tapping (4) WASHER, 5/16 Flat * SCREW, 5/16-18 x 5/8 Hex Washer Self-Tap (7) * NUT, 3/8-16 Hex Flange Lock (8) DECAL, Instruction Frame Top (EC) PAD, Foot (Rubber Deluxe) (2) SPACER, 11/32 x 5/8 x 5/16 (2) NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) 35A ASSEMBLY, Anti-Spin/Belt Guide (for 42 Deck) 35B ASSEMBLY, Anti-Spin/Belt Guide (for 48 Deck) BUSHING, Flange (2) BRACKET, Hood Pivot CLIP, Wire SCREW, 5/16-18 x 1 Hex Head Cap, Grade 2 (2) *Used on 48 Deck Models HYDRO LAWN TRACTORS SERIES F MANUAL No

20 42 CUTTING DECK (Belt, Blade Brake Shown on Page 27) MANUAL No HYDRO LAWN TRACTORS SERIES F

21 42 CUTTING DECK (Belt, Blade Brake Shown on Page 27) 1A ASSEMBLY, 42 Cutting Deck (Includes Decal items 44 & 49) (Model: LT160H42FBV) 1B ASSEMBLY, 42 Cutting Deck (Includes Decal items 44 & 49) (Model: LT160H42FBV2) DEFLECTOR, Side Discharge (Includes item 3) DECAL - DANGER BOLT, Gage Wheel (4) NUT, 3/8-16 Wing (4) WHEEL, Gage (4) NUT, 3/8-16 Hex Center Lock, Grade 5 or B (4) NUT, 5/16-18 Hex Flange Lock, Grade 5 (10) CAP, Vinyl (2) ASSEMBLY, Spindle Lock (2) BOLT, 3/8-16 x 3/4 Carriage, Grade 2 (12) BRACKET, Lift (Right Side) BRACKET, Lift (Right Side) (Model: LT160H42FBV2 Only!) WASHER, 3/8 Flat (4) WASHER, 13/32 Flat (2) BRACKET, Front Hanger (Left Side) NUT, 3/8-16 Hex Flange Lock (15) BRACKET, Front Lift Arm Hanger T-NUT, 5/16-18 Thread BOLT, 3/8-16 x 1 Hex Flange Lock (2) ASSEMBLY, Spindle Brace (2) GUARD, Pulley (2) SCREW, 3/8-16 x 1 Hex Head Cap, Grade ECCENTRIC, Leveling NUT, 3/8-16 Hex (2) WASHER, 3/8 Split Lock (3) BRACKET, Front (Right Side) LINK, Adjustment WASHER, 3/8 Flat (2) PIN, Deck Hanger CABLE, Deck Lift CLEVIS, Lift Cable PIN, Hair, 3/32 x 1-1/ PIN, Clevis, 3/8 x 1-1/ PIN, Hair,.148 x 2.62 (2) ASSEMBLY, Front Hanger NUT, 3/8-16 Hex Center Lock, Grade 5 or B BRACKET, Idler SLEEVE, 1/2 x 13/32 x 3/ PULLEY, Idler 4-1/ BOLT, 3/8-16x1-1/2 Hex Flange Lock, Grade NUT, 3/4-16 Hex Jam (2) PULLEY, Spindle (2) DECAL, 42 Deck DECAL - CAUTION (Rotating Blades ) BRACKET, Deck Lift (Left Side) BRACKET, Deck Lift (Left Side) (Model LT160H42FBV2 Only) WASHER, Spindle (2) BOLT, 3/8-16 x 1-3/4 Hex Flange Lock NUT, 5/16-18 Hex Flange Lock, Grade 5 (3) DECAL - CAUTION (Deflector in Place) BOLT, 3/8-16 x 3/4 Hex Flange Lock (12) BLADE, 21 Cutter (2) WASHER, Cone, 13/32 x 1-13/32 Diameter (4) SCREW, 3/8-24 x 1-1/4 Hex Head Cap, Grade 5 (2) BOLT, 5/16-18 x 1 Short Neck Carriage, Grade 5 (2) BOLT, 5/16-18 x 5/8 Carriage, Grade 5 (2) PIN, Hair, 3/32 x 1-1/2 (2) RETAINER, 5/16 Bolt (2) WASHER, 5/16 Split Lock (2) WING-NUT, 5/16-18 (2) ASSEMBLY, Spindle (2) PLATE, Support SCREW, 5/16-18 x 1 Hex Head Cap, Grade 5 (2) POST, Anti Scalp (4) SCREW, 3/8-16 x 1-1/4 Hex Head Cap Grade 5 (4) HYDRO LAWN TRACTORS SERIES F MANUAL No

22 48 CUTTING DECK SUB ASSEMBLY (5-7821) MANUAL No HYDRO LAWN TRACTORS SERIES F 22

23 48 CUTTING DECK SUB ASSEMBLY (5-7821) FITTING, 3/16 Serrated Grease (4) SCREW, 3/8-16 x 1-1/4 Hex Head Cap, Grade BOLT, Gage Wheel WELDMENT, Deck BRACKET, Rear Lift- 48 Deck (2) BRACKET, Front Hanger- R.H BRACKET, Front Hanger- L.H BRACKET, Front Hanger- 48 Deck STIFFENER, 48 Deck WELDMENT, Idler Pivot (2) ASSEMBLY, Front Lift Arm- 97 Model Year (Includes items 12 thru 16) WELDMENT, Front Lift Arm ARM, Lift WASHER, Cone 3/8 I.D NUT, 3/8-16 Hex BOLT, 3/8-16 x 1-1/4, Grade NUT, 5/16-18 Hex Flange Lock, Grade 5 (8) NUT, 3/8-16 Hex Flange Lock (11) BOLT, 5/16-18 x 5/8 Short Neck Carriage, Grade 5 (8) BOLT, 3/8-16 x 3/4 Short Neck Carriage, Grade 2 (12) NUT, 5/16-18 Hex Nyloc NUT, 3/8-16 Hex Nyloc (8) SCREW, 3/8-16 x 1 Hex Head Cap, Grade 5 (6) BRACKET, Hinge HYDRO LAWN TRACTORS SERIES F MANUAL No

24 48 CUTTING DECK, BELTS, BRAKES MANUAL No HYDRO LAWN TRACTORS SERIES F 24

25 48 CUTTING DECK, BELTS, BRAKES ASSEMBLY, 48 Deck (see pages 22 & 23) ASSEMBLY, Drive Spindle (see page 31) ASSEMBLY, L.H./R.H. Spindle (2) (see page 31) PIN, Chute Hinge RING, Retaining (2) SPRING, Torsion (Side Chute) CHUTE, Side Discharge WASHER, Spacer (8) WASHER, 3/8 Flat (8) BEARING, 1/2 x 3/4 Plastic (8) PIN, 3/32 x 1-1/2 Hair (5) WELDMENT, Anti-Scalp Wheel (4) SCREW, 1/2-20 x 4-1/2 Hex Head Cap, Grade 5 (4) NUT, 1/2-20 Hex Center Lock, Grade 5 (4) SLEEVE, Caster Wheel (4) ROLLER, Low Density Polyethylene (4) SWIVEL, Brake Link (2) ROD, Rear Lift (2) WASHER, 1/2 Flat (3) PIN, 1/2 Self-Locking Cotter (4) WASHER, 3/8 Flat (4) NUT, 5/16-18 Hex Nyloc (6) DECAL, Warning- CPSC Cut Finger (2) DECAL, 48 Deck DECAL, Chute/Deflector Warning DECAL, CPSC Heavy Adhesive BOLT, 5/16-18 x 3/4 Short Neck Carriage, Grade 5 (6) PIN, 3/8 x 1-1/2 Clevis BELT, HA (Electric Clutch) SWIVEL, Lift BELT, HA ROD, Front Lift SPACER, Axle NUT, 3/8-16 Hex Center Lock SPACER, Tie Rod ASSEMBLY, Deck Idler (see pages 28 & 29) ASSEMBLY, Drive Idler Arm (see pages 28 & 29) RING, 1 External Retaining (2) BUSHING, 1 Machine (2) SPRING, Extension- Primary Idler PIN, Deck Hanger PIN, 3/32 x 1-1/2 Hair (2) COVER, L.H. Spindle COVER, R.H. Spindle NOTE: THE HEADS OF THESE FASTENERS ON FACING PAGE ARE LOCATED INSIDE THE DECK. HYDRO LAWN TRACTORS SERIES F MANUAL No

26 SPINDLE ASSEMBLY - 42 CUTTING DECK 7) ASSEMBLY, Spindle Housing, 42 Cutting Deck (Models: LT160H42FBV & LT160H42FBV2) (Includes items 2 thru RING, External Retaining 1-3/4 (2) BEARING, Spindle (2) HOUSING, Spindle HOLDER, Blade WASHER, Spindle SPINDLE (6.5 Long) MANUAL No HYDRO LAWN TRACTORS SERIES F 26

27 BELT, BLADE BREAK - 42 CUTTING DECK BELT, Drive NUT, 3/4-16 Hex Jam PULLEY, Drive SCREW, 3/8-16 x 2 Hex Head Cap, Grade PULLEY, Idler RING, Retaining (2) ARM, Brake WASHER, Spindle NUT, 3/8-16 Hex Center Lock, Grade 5 or B SPRING, Idler HYDRO LAWN TRACTORS SERIES F MANUAL No

28 48 DECK IDLER ASSEMBLIES DECK IDLER ASSEMBLY DRIVE IDLER ARM ASSEMBLY MANUAL No HYDRO LAWN TRACTORS SERIES F 28

29 48 DECK IDLER ASSEMBLIES FLAT IDLER, 4-1/ BUSHING, Caster (4) SPACER, Tie Rod (4) WELDMENT, Idler Arm FITTING, Lube 1/4-28 Straight (2) WASHER, 3/8 Flat NUT, 3/8-16 Hex, Grade 5 or B NUT, 3/8-16 Hex Center Lock, Grade 5 or B (2) BOLT, 3/8-16 x 3, Round Head Square Neck Grade WELDMENT, Idler Arm PULLEY, Flat Idler- 3-1/4 O.D SPACER SPRING, Extension WASHER, 3/8 SAE Flat SCREW, 3/8-16 x 1, Hex Washer Self-Tap NUT, 1/2-13 Hex, Grade 5 or B WASHER, 1/2 Split Lock SCREW, 1/2-13 x 3 Hex Head Cap HYDRO LAWN TRACTORS SERIES F MANUAL No

30 IMPLEMENT LIFT PARTS 1A LEVER, Implement Lift (Models: LT160H42FBV & LT160H42FBV2) 1B LEVER, Implement Lift (Model LT180H48FBV2) (not shown) ROD, Lift Lever KNOB, Lift Lever CAP, Lift Lever Rod QUADRANT, Lift Lever SCREW, 5/16-18 x 7/8 Truss Head (Torx) (2) SCREW, 5/16-18 x 5/8 Truss Head (Torx) NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) PIVOT, Lift Lever 10A BELLCRANK, Lift Lever 10B BELLCRANK, Lift Lever (Model LT180H48FBV2) SPRING, Latch Detent PIN, Hair, 5/32 x 2-5/8 (2) PIN, Dowel, 1/4 x 1-1/ DETENT, Latch SCREW, 1/4-20 x 5/8 Truss Head (Torx) LATCH, Pivot WASHER, 1/2 Flat WASHER, 3/8 Flat PIN, 3/32 x 3/4 Cotter MANUAL No HYDRO LAWN TRACTORS SERIES F

31 SPINDLE ASSEMBLIES 48 CUTTING DECK ASSEMBLY, Spindle (contains indented items below) (3) BEARING, Sealed (2) WASHER, Spindle SNAP-RING, Spindle Shaft SHAFT, Spindle SPACER, Bearing BLADE, 16-1/2 (48 Deck) WASHER, Beveled BOLT, 5/8-18 x 6-5/8 Hex Head, Grade FITTING, Lube HOUSING, Cutter VENT, Spindle BOLT, 3/8-16 x 1-1/4 Rib Necked (6) 13A PULLEY, Spindle (48 Deck LH & RH) 13B PULLEY, Spindle (48 Deck/Drive) NUT, 5/8-18 Hex Flange Lock, Grade NUT, 3/8-16 Hex Nyloc (6) CUP, Spindle Cover NOTE: Part # (Spindle Housing sub-assembly) contains one of item 10 & six of item 12. HYDRO LAWN TRACTORS SERIES F MANUAL No

32 ENGINE COMPONENTS (Model LT160H42FBV) *NOTE: Decal mounts to outside of breather cover MANUAL No HYDRO LAWN TRACTORS SERIES F 32

33 ENGINE COMPONENTS (Model: LT160H42FBV) 1 ** ENGINE, B. & S HP OHV, Model 28Q777, Type 0672, Trim E1 (Model: LT160H42FBV) CLIP, Speed ASSEMBLY, Oil Valve SCREW, #8-18 x 1/2 Hex Head, Self-Tapping (3) EXTENSION, Muffler HEAT SHIELD, Muffler CLIP, J Type CLAMP, Fuel Line (2) LINE, Fuel, 14 Long NUT, 5/16-18 Hex, Grade 5 or B (4) WASHER, 5/16 Split Lock (4) WASHER, 5/16 Flat (5) CLIP, Wiring Harness (2) SCREW, 5/16-18 x 1-3/4 Hex Head Cap, Grade 5 (2) PULLEY, Traction Drive WASHER, 7/16 Split Lock KEY, 1/4 Square x 3/ BOLT, 1/4-20 x 1/2 Hex Flange Lock, Grade 5 (2) SCREW, 7/16-20 x 2-1/2 Hex Head Cap, Special, Grade CLUTCH/BRAKE WASHER, 5/16 Internal Tooth Lock DECAL, Warning Speed Setting PURCHASE ENGINE & ENGINE PARTS OTHER THAN THOSE LISTED, FROM ENGINE SERVICE OUTLETS. MANUAL No HYDRO LAWN TRACTORS SERIES F 33

34 ENGINE COMPONENTS (Model LT160H42FBV2) 24 MANUAL No HYDRO LAWN TRACTORS SERIES F 34

35 ENGINE COMPONENTS (Model: LT160H42FBV2) 1 ** ENGINE, B. & S., 16.0 HP V-Twin, Model , Type 1150, Trim E MUFFLER GASKET, Muffler/Exhaust MANIFOLD, Exhaust ASSEMBLY, Oil Valve Drain EXTENSION, Oil Drain DEFLECTOR, Exhaust SHIELD, Muffler Heat BOLT, 5/16-18 x 3-1/2 Shoulder, Hex Head (2) LOCK, Screw SCREW, #8-18 x 1/2 Self-Tapping (4) SCREW, 5/16-18 x 1/2 Hex Washer Head, Self Tapping (4) CLAMP, Fuel Line (2) LINE, Fuel, 14 Long NUT, 5/16-18 Hex Flanged Lock, Grade SHIELD, Heat SCREW, 5/16-18 x 1-3/4 Hex Head Cap, Grade 5 (2) WASHER, 5/16 Flat Grade 5 (4) WASHER, 5/16 Split Lock (2) NUT, 5/16-18 Hex Grade 5 or B (2) KEY, 1/4 x 1/4 x 3/4 Square PULLEY, Traction Drive CLUTCH/BRAKE DECAL, Warning Speed Setting SCREW, 1/4-20 x 5/8 Hex Head Cap, Grade 5 (2) NUT, 1/4-20 Hex Flanged Lock, Grade 5 (2) SCREW, 7/16-20 x 2-1/2 Hex Head Cap, Special, Grade SCREW, 5/16-18 x 1 Hex Head Cap, Grade 2 (2) NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) WASHER, 7/16 Split Lock **PURCHASE ENGINE & ENGINE PARTS OTHER THAN THOSE LISTED, FROM ENGINE SERVICE OUTLETS. HYDRO LAWN TRACTORS SERIES F MANUAL No

36 ENGINE COMPONENTS (Model LT180H48FBV2) 30 MANUAL No HYDRO LAWN TRACTORS SERIES F 36

37 ENGINE COMPONENTS (Model: LT180H48FBV2) 1 ** ENGINE, B. & S., 18.0 HP V-Twin, Model , Type 1143, Trim E MUFFLER GASKET, Muffler/Exhaust MANIFOLD, Exhaust ASSEMBLY, Oil Valve Drain EXTENSION, Oil Drain DEFLECTOR, Exhaust SHIELD, Muffler Heat BOLT, 5/16-18 x 3-1/2 Shoulder, Hex Head (2) LOCK, Screw SCREW, #8-18 x 1/2 Self-Tapping (4) SCREW, 5/16-18 x 1/2 Hex Washer Head, Self Tapping (4) CLAMP, Fuel Line (2) LINE, Fuel, 14 Long NUT, 5/16-18 Hex Flanged Lock, Grade WASHER, 7/16 Split Lock SCREW, 5/16-18 x 1-3/4 Hex Head Cap, Grade 5 (2) WASHER, 5/16 Flat Grade 5 (4) WASHER, 5/16 Split Lock (2) NUT, 5/16-18 Hex Grade 5 or B (2) KEY, 1/4 x 1/4 x 3/4 Square PULLEY, Traction Drive CLUTCH/BRAKE SHIELD, Heat SCREW, 1/4-20 x 5/8 Hex Head Cap, Grade 5 (2) NUT, 1/4-20 Hex Flanged Lock, Grade 5 (2) SCREW, 7/16-20 x 2-1/2 Hex Head Cap, Special, Grade SCREW, 5/16-18 x 1 Hex Head Cap, Grade 2 (2) NUT, 5/16-18 Hex Flange Lock, Grade 5 (2) DECAL, Warning Speed Setting **PURCHASE ENGINE & ENGINE PARTS OTHER THAN THOSE LISTED, FROM ENGINE SERVICE OUTLETS. HYDRO LAWN TRACTORS SERIES F MANUAL No

38 ELECTRICAL - (Model: LT160H42FBV) (MODEL: LT160H42FBV) MANUAL No HYDRO LAWN TRACTORS SERIES F

39 ELECTRICAL (Models: LT160H42FBV2 & LT180H48FBV2) (MODELS: LT160H42FBV2 & LT180H48FBV2) HYDRO LAWN TRACTORS SERIES F MANUAL No

40 ELECTRICAL COMPONENTS KIT, Battery (Includes Decal P.N & Battery Without Acid) NUT, 1/4-20 Hex Center Lock, Grade 5 or B (2) TRAY, Battery RETAINER, Screw CABLE, Ground (Black) SOLENOID (Was 18604) SCREW, 1/4-20 x 1/2 Self-Tapping (2) NUT, 1/4-20 Hex Jam (2) WASHER, 1/4 Internal Tooth Lock (2) CABLE, Positive (Red) SCREW, 1/4-20 x 5/8 Hex Head Cap, Grade 5 (2) COVER, Positive Terminal RELAY MANUAL No HYDRO LAWN TRACTORS SERIES F

41 6 5 HYDRO RESERVOIR ASSEMBLY BRACKET, Reservoir Mounting RESERVOIR, Expansion CLAMP, 13/16 (2) HOSE, Hydraulic 4-1/2 Long VALVE, Vent BOLT, 5/16-18 x 1/2 Hex Washer Self-Tap (2) CABLE TIE, 9 HYDRO LAWN TRACTORS SERIES F MANUAL No

42 DECALS DECAL, Instruction Frame Top DECAL, Chute/Deflector DECAL, Warning Speed Setting DECAL, Roll Release DECAL, Hydro Reservoir DECAL, Caution Battery Location LOGO, Medallion DECAL, Certification, B MANUAL No HYDRO LAWN TRACTORS SERIES F 42

43 DECALS (continued) DECAL, Console w/headlights DECAL, Console Indicators (not shown, outline same as item 9) DECAL, 42 Deck DECAL, 48 Deck (not shown, similar to item 11) DECAL, Danger CPSC DECAL, Danger (not shown, same as item 13 but with heavy adhesive) DECAL, Shift Cover HYDRO LAWN TRACTORS SERIES F MANUAL No

44 Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED PREVIOUSLY. COPYRIGHT 1999 SNAPPER INC. ALL RIGHTS RESERVED MANUAL No (Rev. 1, 06/05/03) Printed in U.S.A. 44