Reproduction. Not for. Parts Manual. IS3200Z Series Zero-Turn Riding Mower
|
|
- James Marshall
- 5 years ago
- Views:
Transcription
1 Parts Manual IS3200Z Series Zero-Turn Riding Mower Models: Description: IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZKAV3761) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBV3661) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZKAV3772) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZBV3672) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBV3261) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZBV3272) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZKAV3561) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZKAV3572) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBVE3761 ANSI EXP) IS3200Z Series w/ ROPS (IS3200ZBVE37 ANSI EXP) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZBVE2872 CAL) IS3200Z Series w/ ROPS (IS3200ZBV36 ANSI EXP) " Side Discharge icd Mower Deck (3200Z/72 ANSI EXP) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBV3661 ANSI EXP) IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBVE3761) IS3200Z Series w/ 72" Mower Deck & ROPS (IS3200ZBVE3772) See Inside Front Cover for Additional Models Briggs and Stratton Power Products Group, LLC North Main Street Munnsville, NY USA Revision J Rev. Date: 9/1/16
2 Models: Description: IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBVE2861 CAL)
3 Table Of Contents MODEL COMPONENTS PAGE Main Frame & Front Suspension Group... 4 Rear Bumper & ROPS... 6 Seat Plate & Floor Group... 8 Seat Replacement Parts & Fuel Supply Hose, Tank Replacement Parts, and EVAP Group Fuel Tank & Mount Group Fuel Supply Hose, Tank Replacement Parts & Evap Canister Group - CAL Models Instrument Control Panel - All Other Models Instrument Control Panel - Kawasaki DFI Models Only Engine & PTO Group Engine Service Parts - Briggs & Stratton Vanguard Big Block Engine Service Parts - Kawasaki (FX651V - FX1000V) Transaxle Drive Group Motion Control - Control System Motion Control - Handles & Dampeners Hydraulic Group Parking Brake Group Rear Suspension Group Deck Lift Group Transaxle SERVICE PARTS - ZT Wheel & Tire Group Decal Group - Brand & Model S/N: & Below Decal Group - Brand & Model S/N: & Above Decal Group - Safety & Operation (USA Models) Decal Group - Safety & Operation (Export Models) " Mower Deck Group - Rollers & Casters " & 72" Mower Deck Group - Deck Hangers " Mower Deck Group - Housing, Covers, Spindles & Blades " Mower Deck Group - Pulleys, Belt & Idler Arm " Mower Deck Group - Housing, Covers, Spindles & Blades " Mower Deck Group - Pulleys, Belt, & Idler Arm " & 72" Mower Deck Group - Pusher Bars " Mower Deck Group - Rollers & Casters Spindle Service Parts Electrical Group - Briggs & Stratton & Kawasaki Carbureated Models Electrical Group - Kawasaki DFI Models Electrical Group - Briggs & Stratton EFI Models Electrical Schematics - Kawasaki FX S/N: & Below Electrical Schematics - B&S / S/N: & Below Electrical Schematics - Kawasaki DFI S/N: & Below Electrical Schematics - B&S 61E877 EFI Electrical Schematics - Kawasaki DFI S/N: & Above Electrical Schematics - Kawasaki FX S/N: & Above Electrical Schematics - B&S / S/N: & Above Electrical Schematics - B&S 49E877 EFI S/N: & Above Torque Specification Chart... Inside Back Cover
4 Main Frame & Front Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
5 Main Frame & Front Suspension Group REF NO PART NO. QTY. DESCRIPTION WASHER, BELLEVILLE X NUT, 3/4-16, HEX JAM NYLON LOCK CAP, LOW PROFILE, STEEL BOLT, 1/4-28 X 1/2, GD5 CZ WASHER, 3/8 SAE X16 2 BOLT, 3/8-16 X 2 GD5 CZ X18 2 BOLT, 3/8-16 X 2-1/4 GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE GREASE FITTING, 1/4-28 STRAIGHT BUSHING, 1.00 X 1.13 X 1.38, PLASTIC NUT, 3/4-16 HEX NYLON LOCK NUT, 1/4-20 HEX SERR. FLANGE X28 4 BOLT, 3/4-16 X 3-1/2 GD8 CZ SPACER,.76 X 1.00 X NUT, 3/4-16 HEX JAM WASHER, 3/4 SAE SEAL, GREASE BEARING, TAPERED ROLLER, SHOCK / SPRING ASSEMBLY, OE B 2 WELD, CASTER YOKE - RED BALL JOINT, 3/4-16, MALE BEARING, CUP (SV) BUMPER, RUBBER 1/ SPACER,.75 X 1.50 X 1.00, CZ 25-1 * WELD, MAIN FRAME, IS3200Z - RED * If frame is damaged, call ext B 1 WELD, A-ARM, IS3200Z, LH - RED (61" Models Only) B 1 WELD, A-ARM, IS3200Z, RH - RED B 1 WELD, A-ARM, LH, IS3200Z-72 - RED (72" Models Only) CLAMP, 5/16, DOUBLE, WIRE & TUBE (To hold spanner wrench) X6 1 BOLT, 1/4-20 X 3/4 GD5 YZ WASHER, 1/4 SAE NUT, 1/4-20 HEX NYLOCK FLANGE Footnotes
6 Rear Bumper & ROPS NOTE: Unless noted otherwise, use the standard hardware torque specification chart
7 Rear Bumper & ROPS REF NO PART NO. QTY. DESCRIPTION PLUG, PANEL, BLACK WASHER, 5/16 SAE WASHER, 1/2 SAE WASHER, 3/8 GD.9 FLAT NUT, 5/16-18 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLOCK FLANGE NUT, 1/2-13 HEX NYLOCK FLANGE SPACER,.52 X 1.00 X.38, CZ SEAT BELT, RETRACTING - ASSM SCREW, 1/2-13 X 1.00, SHCS ROPS, IS3200 (Call ex.707 for ROPS service) X8 6 BOLT, 5/16-18 X 1 GD5 CZ X8 2 BOLT, 3/8-16 X 1 GD5 CZ X10 7 BOLT, 1/2-13 X 1-1/4 GD5 CZ X12 1 BOLT, 1/2-13 X 1-1/2 GD5 CZ A 2 BAR, MOUNT, SEAT BELT, IS700Z - BLK B 1 PLATE, CARB PROTECTOR - RED A 1 PLATE, HEAT SHIELD, IS BLK B 1 WELD, BUMPER, IS3200Z - RED X24 4 BOLT, 1/2-13 X 3" GD NUT, 1/2-13 HEX SIDE LOCK Footnotes
8 Seat Plate & Floor Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
9 Seat Plate & Floor Group REF NO PART NO. QTY. DESCRIPTION SAFETY WALK, FLOOR REST, 6.00 X SAFETY WALK, FLOOR PLATE, S50X, 10X NUT, 3/8-16 HEX NYLOCK FLANGE KNOB-INT THR ARM 2.12WD 1.06LG WASHER, 5/16 SAE X8 5 BOLT, 5/16-18 X 1 GD5 CZ WASHER, 3/8 USS NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL X10 1 BOLT, 5/16-18 X 1-1/4, CARRIAGE CZ X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE SEAT, IS3100 / IS5100 (S/N: & Below) X6 2 SCREW, #10-24 X 3/4 ROUND PHILLIPS NUT, #10-24 HEX NYLON LOCK WASHER,.39 X 2.00 X X WASHER, 3/8 SAE X18 2 BOLT, 3/8-16 X 2-1/4 GD5 CZ X48 1 BOLT, 3/8-16 X 6 GD5 CZ SPACER,.38 X.50 X 5.06, CZ SPRING,.688 ID X.130 WIRE DIA SWITCH (SEE ELECTRICAL GROUP) NUT, 5/16-18 HEX NYLOCK FLANGE ASSM, SEAT PLATE W/ DECALS, IS3200Z, DOM ( B)(Export Models Only) ASSM, SEAT PLATE W/ DECALS, IS3200Z, ANSI-EXP ( B)(Export Models Only) A 1 WELD, SEAT SWITCH, IS700 - BLK B 1 PLATE, FLOOR, REMOVABLE, IS3100Z - RED B 1 PLATE, FRONT FLOOR, IS3100Z - RED MNT, VBRTN, RBBR A 1 GUARD, DEBRIS, IS2100Z - BLK X6 3 BOLT, 1/4-20 X 3/4 GD5 CZ WASHER, 1/4 SAE NUT, 1/4-20 HEX SERR. FLANGE BODY CLIP, 5/ /4 MATERIAL SEAT, HIGH BACK, SEAT INC (S/N: & Above) Footnotes
10 Seat Replacement Parts & NOTE: Unless noted otherwise, use the standard hardware torque specification chart
11 Seat Replacement Parts & REF NO PART NO. QTY. DESCRIPTION X1 1 COVER, SEAT BACK, EVC, SEATS INC X2 1 COVER, CUSHION, EVC, SEATS INC X3 1 ARM REST ASSEMBLY X4 1 ARM REST PAD X1 1 ARM PAD ASSEMBLY X2 1 ARM REST ASSEMBLY (LEFT AND RIGHT) X3 1 BACK COVER X4 1 CUSHION COVER X5 1 TRACK KIT Footnotes
12 Fuel Supply Hose, Tank Replacement Parts, and EVAP Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
13 Fuel Supply Hose, Tank Replacement Parts, and EVAP Group REF NO PART NO. QTY. DESCRIPTION CLAMP, HOSE, EXTERNAL, 1/2 - RED X14P5 1 HOSE, 1/4" FUEL, 14.50" X28P5 1 HOSE, 1/4" FUEL, 28.50" X10P5 1 HOSE, 1/4" FUEL, 10.50" (B&S Engines Only) X12P5 1 HOSE, 1/4" FUEL, 12.50" (Kawasaki Engines Only) VALVE, FUEL SHUT-OFF, FITTING, 3/16" TEE, BARB TYPE, HDPE X18 1 HOSE, VAPOR, 5MM ID, LG (Kawasaki DFI & B&S Engines Only) X28P5 1 HOSE, VAPOR, 5MM ID, LG X12 1 HOSE, VAPOR, 5MM ID, LG (B&S Engines Only) X3 2 HOSE, VAPOR, 5MM ID, 3.00 LG X20 1 HOSE, VAPOR, 5MM ID, LG (Kawasaki DFI Engines Only) A 1 BRACKET, FUEL VALVE, IS BLK X6 2 BOLT, 5/16-18 X 3/4 GD WASHER, 5/16 SAE NUT, 5/16-18 HEX NYLOCK FLANGE TIE, SELF-LOCKING, 12" REMOTE, VENT ASSEMBLY, NO VALVE (SV) GROMMET (SV) X3 2 FUEL FILTER (SV) FILTER, FUEL BUSHING-FUEL TANK RED RUBBER (SV) HOSE ASSEMBLY (SV) X33 1 HOSE, VAPOR, 5MM ID, LG (Kawasaki Carbureated Models Only) X14 1 HOSE, VAPOR, 5MM ID, LG (Kawasaki Carbureated Models Only) Footnotes
14 Fuel Tank & Mount Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
15 Fuel Tank & Mount Group REF NO PART NO. QTY. DESCRIPTION TANK, FUEL, IS2000 & IS LH TANK, FUEL, IS2000 & IS RH FUEL CAP, 3-1/2", MANAGED VENT OUT, 12" B 2 BADGE, IS IS RED SCREW, #10-24 X 3/8 ALLEN BHBZ X6 8 BOLT, 5/16-18 X 3/4 GD WASHER, 5/16 LOCK YZ WASHER, 5/16 F436 FLAT GAUGE, FUEL, 12 (SV) X1 2 GROMMET, FUEL GAUGE (SV) Footnotes
16 Fuel Supply Hose, Tank Replacement Parts & Evap Canister Group - CAL Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart
17 Fuel Supply Hose, Tank Replacement Parts & Evap Canister Group - CAL Models REF NO PART NO. QTY. DESCRIPTION CLAMP, HOSE, EXTERNAL, 1/2 - RED X13 1 HOSE, 1/4" FUEL, 13.00" X26P5 1 HOSE, 1/4" FUEL, 26.50" VALVE, FUEL SHUT-OFF, X23 1 HOSE, 1/4" FUEL, 23.00" CNSTR, CARB, 6 GAL CLAMP, 3" ID, CUSHIONED, STAINLESS X6 4 SCREW,1/4-20X3/4, ZINC PHOS & OIL NUT, 1/4-20 HEX NYLOCK FLANGE FITTING, 3/16" TEE, BARB TYPE, HDPE X22 2 HOSE, VAPOR, 5MM ID, LG X5 1 HOSE, VAPOR, 5MM ID, 5.00 LG X19 1 HOSE, VAPOR, 5MM ID, LG X24P5 1 HOSE, VAPOR, 5MM ID, LG A 1 PLATE, MOUNT, CANISTER, IS2100Z - BLK X6 2 BOLT, 5/16-18 X 3/4 GD5 CZ WASHER, 5/16 SAE NUT, 5/16-18 HEX NYLOCK FLANGE TIE, SELF-LOCKING, 12" GROMMET (SV) BUSHING-FUEL TANK RED RUBBER (SV) HOSE ASSEMBLY (SV) X3 2 FUEL FILTER (SV) DUST FILTER, CANISTER (SV) REMOTE, VENT ASSEMBLY, NO VALVE (SV) Footnotes
18 Instrument Control Panel - All Other Models NOTE: Unless noted otherwise, use the standard hardware torque specification chart
19 Instrument Control Panel - All Other Models REF NO PART NO. QTY. DESCRIPTION X4 3 SCREW,ALLEN HEAD 1/4-20X.500 ZINC PHOS PLUG,.820X1.44 HOLE, BLACK PLASTIC SWITCH, BLADE ENGAGEMENT SWITCH, IGNITION, 6 POST * HOUR METER, ASSEMBLY ( ) CABLE, CHOKE CONTROL, 51 (Z) (Briggs & Stratton Carbureted Models Only) X6 2 SCREW, #10-24 X 3/4 ROUND PHILLIPS A 1 PANEL, CONTROL, IS2100Z - BLK (Briggs & Stratton Carbureted Models Only) RING, SWITCH RETAINER X1 1 KNOB, THROTTLE CONTROL (SV) CABLE, THROTTLE, 47" LEVER, THROTTLE CONTROL, HEAVY-DUTY O-RING, 7/8 ID X 1/16 W NUT, #10-24 HEX NYLON LOCK TIE, SELF-LOCKING, 12" NUT, 3/8-24 HEX KEY, IGNITION MOLDED SET (SV) COVER, PLASTIC, SNAP ON (SV) NUT, PLASTIC (SV) A 1 PANEL, CONTROL, IS2100/ BLK (Briggs & Stratton EFI Models Only) LIGHT, INDICATOR, EFI (Briggs & Stratton EFI Models Only) CABLE, THROTTLE, 52" (Kawasaki Carbureted Models Only) Footnotes * When replacing this hour meter, please call our service department at ext
20 Instrument Control Panel - Kawasaki DFI Models Only NOTE: Unless noted otherwise, use the standard hardware torque specification chart
21 Instrument Control Panel - Kawasaki DFI Models Only REF NO PART NO. QTY. DESCRIPTION A 1 PANEL, CONTROL, IS3100Z - BLK X4 3 SCREW, 1/4-20 X 1/2 ALLEN BH ACTUATOR, ROCKER SWITCH - RED SWITCH, IGNITION, 6 POST KEY, IGNITION, MOLDED SET COVER PLASTIC NUT RING, SWITCH RETAINER SWITCH, BLADE ENGAGEMENT * HOUR METER, ASSEMBLY ( ) PLUG,.820X1.44 HOLE, BLACK PLASTIC LAMP, MALFUNCTION INDICATOR BODY, ROCKER SWITCH O-RING, 7/8 ID X 1/16 W Footnotes * When replacing this hour meter, please call our Service Department at ext
22 Engine & PTO Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
23 Engine & PTO Group REF NO PART NO. QTY. DESCRIPTION 1 FX1000V-AS14-R 1 ENGINE, KAWA, DFI (Kawasaki DFI Models Only) SPACER, 1.13 X 1.75 X 1.35, CZ MUFFLER, 37 HP KAWASAKI (Kawasaki Models Only) CLUTCH, WARNER, 250 ft lbs " BOLT, CRANKSHAFT, 7/16-20 X 3-1/4, GD GROMMET, 7/8"ID, 1/4" THICK STK EXTENSION, TAILPIPE, 3" (Kawasaki Models Only) HOSE, OIL DRAIN PULLEY, 4.75 OD X 1-1/8 BORE, BC X10 1 KEY, 1/4 SQ X 1-1/ A 1 ANCHOR, CLUTCH, IS600-IS700 - BLK CLUTCH ANCHOR PAD WASHER,.34 X 1.25 X 10 GA WASHER, 5/16 SAE (Qty: 3 Kawasaki Models Only) X8 4 BOLT, 5/16-18 X 1 GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE X18 1 BOLT, 5/16-18 X 2-1/4 GD5 TFL, ZN NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) BELLEVILLE WASHER X.442 X CLAMP, VINYL INSULATED WASHER, 1/4 SAE X6 1 BOLT, 1/4-20 X 3/4 GD5 YZ NUT, 1/4-20 HEX SERR. FLANGE ADAPTER-OIL DRAIN (Kawasaki Models Only) X14 4 BOLT, 5/16-24 X 1-3/4, GD8 (B&S Models Only) BOLT, 3/8-16 X 1-1/4, SF, PLT W/PATCH (Kawasaki Models Only) SCREW,SELF-TAP,#8-32 X 3/8,WASH HEX, CZ (Kawasaki & B&S 49E877 Models Only) G1 1 ENGINE, B&S, VANGUARD (B&S Carbureted Models) TAIL PIPE EXTENTION, 1.78"ID X 5" LG (B&S Models Only) X1 1 CLAMP, TAILPIPE, 1-7/8" (B&S Models Only) WASHER, 5/16 INT. TOOTH LOCK (Qty: 1 Kawasaki Models Only) X1 1 MUFFLER, ASSY, SERVICE PART (B&S Carbureted Models Only) SET SCREW, 5/16-18 X 3/8, KNURL (SV) METRIC ADAPTER, M14-1.5" TO 3/8 NPTF (B&S Models Only) NUT, HEX, M8-1.25, CZ, GD 8.8 (Kawasaki Models Only) WASHER, 5/16 LOCK CZ (Kawasaki Models Only) BOLT, M X 20MM GD8.8 (Kawasaki Models Only) 38 61E J1 1 ENGINE, 37HP, BRIGGS, VANGUARD, EFI (B&S 61E877 EFI Models Only) NUT, 5/16-24, NYLOCK FLANGE, GD8, CZ (B&S Models Only) J1 1 ENGINE, 32, B&S, J1 (B&S Carbureated Models) 41 FX1000V 1 ENGINE, 35, KAWASAKI (Kawasaki Carbureated Models Only) Footnotes
24 Engine & PTO Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
25 Engine & PTO Group REF NO PART NO. QTY. DESCRIPTION 42 49E G1 1 ENGINE, 28, BRIGGS VANGUARD, EFI (B&S 49E877 EFI Models Only) EXTENSION, TAILPIPE, 3", BLACK (B&S 49E877 EFI Models Only) Footnotes
26 Engine Service Parts - Briggs & Stratton Vanguard Big Block NOTE: Unless noted otherwise, use the standard hardware torque specification chart
27 Engine Service Parts - Briggs & Stratton Vanguard Big Block REF NO PART NO. QTY. DESCRIPTION " AIR CLEANER ASSEMBLY (809670) AIR FILTER - INNER (821136) AIR FILTER - OUTER (841497) CAP - AIR CLEANER (842621) RUBBER DUST CAP (842623) CAP - A/C RAIN (809907) BRACKET - AIR CLEANER (809878) HOSE (Carbureated Models Only) CLAMP - HOSE (807376) OIL FILTER Footnotes
28 Engine Service Parts - Kawasaki (FX651V - FX1000V) NOTE: Unless noted otherwise, use the standard hardware torque specification chart
29 Engine Service Parts - Kawasaki (FX651V - FX1000V) REF NO PART NO. QTY. DESCRIPTION X1 1 AIR FILTER ASSEMBLY,22,24&26HP KAWASAKI ( ) X4 1 AIR FILTER,SECOND,FX651V THRU FX999 ENG ( ) X3 1 AIR FILTER,PRIMARY,FX 651,852, & 999 ENG ( ) X2 1 CASE, AIR FILTER, 22, 24 & 26HP KAWASAKI ( ) X8 1 DUST VALVE,AIR FILTR,22,24&26HP KAWASAKI ( ) CAP, RAIN ( ) X5 1 BRKT,AIR FILTER,22,24&26HP KAV, OUTER ( H) X6 1 BRKT,AIR FILTER,22,24&26HP KAV, INNER ( H) X9 1 BREATHER TUBE, AIR FILTR,22,24&26HP KAWA ( ) X10 1 AIR INLET TUBE,AIR FILTR,22,24&26HP KAWA ( ) CLAMP ( ) X1 1 FILTER,OIL,KAWA FS,FX651,700,FR 603 & 726CC ENG ( ) X1 1 FILTER,OIL,KAWA FX751,801,851,921,100 ( ) FOR KAWASAKI MODELS FX751 & LARGER Footnotes
30 Transaxle Drive Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
31 Transaxle Drive Group REF NO PART NO. QTY. DESCRIPTION PULLEY, FLAT IDLER, 6-3/4" BELT, B-SEC, 129"EL, ARAMID, WRAPED PULLEY-IDLER-V, 5.83OB,.38ID,.94W, STL SPACER,.52 X 1.00 X.56, CZ PULLEY, C-SEC, V-IDLER, 6.25"ODX3/8ID SPACER, IDLER ARM, 1/2, PM SPACER,.52 X.84 X 1.53, PM SPRING-EXT, 1.25OD X 9.3LG X.142WR, BLK SHIELD, PULLEY BEARING, CZ SHIELD, BEARING PULLEY, 3/8ID, CZ A 1 WELD, IDLER ARM, 7.50, BEARINGS - BLK BEARING, BALL, AXLE X40 1 BOLT-1/2-13 X 5 GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE EYE BOLT, 3/8-16 X 4, 2.13THRD, 1" EYE, CZ NUT, 3/8-16 HEX SERRATED FLANGE SPACER,.39 X 1.00 X X22 1 BOLT, 3/8-16 X 2-3/4 GD5 YZ WASHER, 3/8 GD.9 FLAT SPACER,.39 X 1.00 X.50, CZ WASHER-3/8 FENDER X18 1 BOLT, 3/8-16 X 2-1/4 GD5 YZ NUT, 1/2-13 HEX NYLOCK FLANGE Footnotes
32 Motion Control - Control System NOTE: Unless noted otherwise, use the standard hardware torque specification chart
33 Motion Control - Control System REF NO PART NO. QTY. DESCRIPTION A 2 PLATE, CONTROL SYSTEM LOCK - BLK PAD,.77 X 3.50 X.25, POLYURETHANE ROD, HYDRO LINKAGE A 2 PLATE, CONTROL MOUNT - BLK BALL JOINT 5/16-24 RH FEMALE BRONZE RACE X10 14 BOLT, 5/16-18 X 1-1/4 GD5 YZ NUT, 3/8-16 HEX SIDE LOCK BALL JOINT 5/16-24 LH FEMALE BRONZE RACE NUT, 5/16-18 HEX NYLOCK FLANGE ROD, HYDRO LINKAGE, SPACER,.33 X.63 X 1.25, CZ X20 2 BOLT, 5/16-18 X 2-1/2 GD5 YZ X20 2 BOLT, 3/8-16 X 2-1/2 GD5 YZ X12 2 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ NUT, 3/8-16 HEX NYLOCK FLANGE SPACER,.39 X 1.00 X.50, CZ PIVOT, CONTROL SYSTEM WASHER-3/8 FENDER SPACER,.39 X.55 X.38, CZ BEARING,.375" ID X.875" OD X.341" THK WAVE WASHER, 1/2"ID X 087"OD X.01 THK PAD, CONTROL SYSTEM PLATE, CONTROL SYSTEM ARM - HT A 2 LINK, CONTROL SYSTEM ARM, IS BLK BOLT, 3/8-16 X 3/8, 1/2 SHOULDER SPACER,.39 X.75 X.69, CZ NUT, 5/16-24 HEX NUT, 5/16-24 HEX, LH X8 2 BOLT, 7/16-14 X 1 GD NUT, 7/16-14 HEX NYLON LOCK WASHER, 5/16 SAE WASHER, 1/2 SAE Footnotes
34 Motion Control - Handles & Dampeners NOTE: Unless noted otherwise, use the standard hardware torque specification chart
35 Motion Control - Handles & Dampeners REF NO PART NO. QTY. DESCRIPTION A 1 PLATE, NEUTRAL LOCK, RH - BLK A 1 PLATE, NEUTRAL LOCK, LH - BLK A 2 BRACKET, SWITCH MOUNT - BLK WASHER, 5/16 SAE GUARD, RUBBER MOTION CONTROL PUSH RIVET (TREE TYPE), BLACK SCREW, 5/16-18X0.750, GR5, WHIZ-LOCK, ZC BOLT,1/4-20X.75,GR5,RH SH SQ NK,ZNC/CLR NUT, 1/4-20 HEX NYLOCK FLANGE X6 6 BOLT, 5/16-18 X 3/4 GD X24 4 BOLT, 5/16-18 X 3 GD5 CZ NUT, 3/8-16 HEX NYLON LOCK NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) WASHER, 3/8 SAE X10 4 BOLT, 5/16-18 X 1.25" GD 5 TFL X14 2 BOLT- 5/16-18 X 1-3/4 GD5 TFL NUT, 5/16-18 HEX NYLOCK FLANGE X14 4 BOLT, 3/8-16 X 1-3/4 GD X6 6 BOLT, 3/8-16 X 3/4 GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE BUSHING, FLANGE 3/8ID X 7/8 LONG PIN, HAIR,.0915 X 1-7/ SPRING, REVERSE RETURN X8 2 BOLT, 7/16-14 X 1 GD NUT, 7/16-14 HEX NYLON LOCK COLLAR, 3/8 SET ROD, NEUTRAL RETURN, CZ FLANGED BUSHING, 3/8IDX.63ODX.8125FL MM BALL STUD, 5/16-18 X 3/4 THDS GRIP, FOAM, 3/4 ID, 16 LONG (S/N: & Below) A 2 MOUNT, CONTROL ARM - BLK (S/N: & Below)(9.0" Total Length, 4 Adjustment Holes) A 1 WELD, CONTROL HANDLE-LH - BLK (S/N: & Below) A 1 WELD, CONTROL HANDLE-RH - BLK (S/N: & Below) DAMPENER, CONTROL,#(P6709/P3610) BEARING, FLANGE BEARING, BRONZE FLANGE, 3/ A 1 WELD, CONTROL SHAFT, LH - BLK A 1 WELD, CONTROL SHAFT, RH - BLK A 2 MOUNT, CONTROL ARM - BLK (S/N: & Above)(10.95" Total Length, 3 Adjustment Holes) GRIP, FOAM, 1" ID, 16" LONG (S/N: & Above) Footnotes
36 Motion Control - Handles & Dampeners NOTE: Unless noted otherwise, use the standard hardware torque specification chart
37 Motion Control - Handles & Dampeners REF NO PART NO. QTY. DESCRIPTION A 1 WELD, HANDLE MOTION CNTRL, 16.5, 1.0, LH - BLK (S/N: & Above) A 1 WELD, HANDLE MOTION CNTRL, 16.5, 1.0, RH - BLK (S/N: & Above) Footnotes
38 Hydraulic Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
39 Hydraulic Group REF NO PART NO. QTY. DESCRIPTION ZT-5400, LONG AXLE, RH, R ZT-5400, LONG AXLE, LH, L A 1 PLATE, RESERVOIR MOUNT - BLK WASHER, 1/4 SAE HYDRO TANK, HYDRO-GEAR 71938, 1 LITER BOLT, 1/2-13 X 1-1/4, SF, PLT W/PATCH CLAMP, #10 HOSE, STAINLESS NUT, 1/4-20 HEX NYLOCK FLANGE X8 4 BOLT, 5/16-18 X 1 GD5 CZ WASHER, 5/16 SAE NUT, 5/16-18 HEX NYLOCK FLANGE X8 2 BOLT, 1/4-20 X 1 GD5 CZ FITTING, 90 DEG, 5/ PULLEY, ZT5400 (53179) FAN, ZT WASHER, ZT5400, SLOTTED NUT, ZT SPACER, ANTI ROTATE, ZT FITTING, 45, 5/8 TUBE TO 7/8-14 O-RING X23P5 1 HOSE, 5/8, PUSH-LOCK, X20P5 1 HOSE, 5/8, PUSH-LOCK, X3 2 HOSE, 5/8, PUSH-LOCK, 3.00 Footnotes
40 Parking Brake Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
41 Parking Brake Group REF NO PART NO. QTY. DESCRIPTION BEARING, BRONZE FLANGE, 3/ NUT, 5/16-24 HEX NYLON LOCK WASHER, 5/16 SAE NUT, 3/8-16 HEX NYLOCK FLANGE SPACER,.32 X.75 X 1.06, PM SPRING, COMP. 1/2 ID X.140 WIRE X GRIP, FOAM, 3/4 ID X 6 X X14 4 BOLT, 5/16-18 X 1-3/4 GD5 YZ X6 4 BOLT, 3/8-16 X 3/4 GD5 YZ NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) X10 3 BOLT, 5/16-18 X 1-1/4 GD5 YZ A 1 WELD, BRAKE SHAFT - BLK A 2 LINK, BRAKE LOCK - BLK WASHER, 5/16 USS NUT, 5/16-18 HEX NYLOCK FLANGE COLLAR, 5/16 SET SPACER,.33 X.50 X.25, CZ 18-1 SWITCH (SEE ELECTRICAL GROUP) X12 2 BOLT, 5/16-18 X 1-1/2 GD5 YZ NUT, 5/16-18, HEX, CNTR LK,ZINC PHOS/OIL SPRING, EXTENSION,.521 X 4.12, BLACK CABLE, PARKING BRAKE, 32" NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) Footnotes
42 Rear Suspension Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
43 Rear Suspension Group REF NO PART NO. QTY. DESCRIPTION X16 2 BOLT, 3/8-16 X 2 GD5 YZ X28 2 BOLT, 3/8-16 X 3-1/2 GD5 CZ NUT, 3/8-16 HEX SIDE LOCK NUT, 1/2-13 HEX NYLOCK FLANGE X52 2 BOLT, 1/2-13 X 6-1/2 GD8, YZ WASHER, 1/2 SAE NUT, 5/16-18 HEX NYLOCK FLANGE SPACER,.34 X 1.54 X.25, PL SCREW, 5/16-18X1, PHILLIPS HD. BZ SPACER,.52 X 1.00 X SPACER,.39 X 2.00 X 1.35, PM WASHER-3/8 FENDER GREASE FITTING, 1/4-28 STRAIGHT BUSHING, FLANGE SHOCK / SPRING ASSEMBLY, OE B 1 WELD, TRANSMISSION CARRIAGE, IS3200 -RED NUT, 3/8-16 HEX NYLOCK FLANGE Footnotes
44 Deck Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
45 Deck Lift Group REF NO PART NO. QTY. DESCRIPTION SPACER,.52 X 1.00 X.75, CZ (Qty: 3-72" Models) EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ (72" Models) X6 2 PIN, COTTER, 1/8 X 3/ X24 2 BOLT, 1/2-13 X 3 GD5 CZ NUT, 1/2-13 HEX NYLON LOCK X16 1 BOLT, 1/2-13 X 2 GD5 CZ (Qty: 2-72" Models) X20 2 BOLT, 1/2-13 X 2-1/2 GD5 CZ NUT, 1/2-20 HEX JAM NUT, 3/8-16 HEX SERRATED FLANGE (72" Models) ADJUSTER, DECK HANGER WASHER,.390 X 1.50 X.109, CZ PIVOT BLOCK, PLASTIC ROD, DECK LIFT, EXTERNAL THRD, BAR, DECK LIFT, 17.75" ROD, SUSPENSION LINK, IS700, CZ SPACER,.52 X 1.00 X.22, PM, CZ A 1 PEDAL, FOOT - BLK PEDAL, RUBBER SPACER,.52 X 1.00 X.88, PM, CZ WASHER, 1/2 SAE (Qty: 5-72" Models) X22 2 BOLT, 1/2-13 X 2-3/4 GD5 CZ NUT, 1/2-13 HEX NYLOCK FLANGE (Qty: 4-72" Models) X10 2 BOLT, 3/8-16 X 1-1/4 GD5 CZ NUT, 3/8-16 HEX NYLOCK FLANGE (Qty: 7-72" Models) BOLT, 3/8-16 X 3/4, PLT W/PATCH GREASE FITTING, 1/4-28 STRAIGHT COLLAR, 5/8 SPLIT SPRING-EXT,.740 ODX2.025LGX.072WR, BLK EYE BOLT, 3/8-16 X 8, 3THRD, 1EYE, CZ GRIP, FOAM,.475 X 4.35 X SPRING-EXT, ODX13.25LGX.218WR, BLK (Qty: 3-72" Models) PIN, HITCH, 1/2 X 2.00 OAL, YP WASHER, 1/4 FENDER X5 2 BOLT-1/4-20 X 5/8 GD5 CZ NUT, 1/4-20 HEX NYLOCK FLANGE X4 1 PIN, CLEVIS, 1/4 X 1/2, PLATED WASHER, 3/8 SAE X22 4 BOLT, 3/8-16 X 2-3/4 GD5 CZ JOINT-BALL THD.500ID, CLR ZINC A 1 WELD, ROD DECK LIFT, IS700 - BLK A 1 WELD, DECK HEIGHT LINK, IS700 - BLACK Footnotes
46 Deck Lift Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
47 Deck Lift Group REF NO PART NO. QTY. DESCRIPTION A 2 PLATE, PIVOT BLOCK SUPPORT - BLK B 1 WELD, DECK LIFT SHAFT - RED (61) (61" Models) NUT, 1/2-13 HEX JAM (72" Models) B 2 WELD, DECK LIFT LEVER, LH - RED (S/N: & Below) B 2 WELD, DECK LIFT LEVER, RH - RED (S/N: & Below) A 1 WELD, REAR LIFT - LH - BLK BUSHING, 1.00 X 1.13 X 1.38, PLASTIC SPACER,.52 X 1.00 X 1.00 (61" Models) SPACER,.52 X 1.00 X.44, CZ A 1 WELD, REAR LIFT - RH - BLK NUT, 3/8-16 HEX NUT, 3/8-16 HEX NYLON LOCK B 1 WELD, DECK LIFT SHAFT, 72 (72" Models) B 2 WELD, DECK LIFT, LEVER, LH - RED (S/N: & Above) B 2 WELD, DECK LIFT, LEVER, RH - RED (S/N: & Above) Footnotes
48 Transaxle SERVICE PARTS - ZT5400 NOTE: Unless noted otherwise, use the standard hardware torque specification chart
49 Transaxle SERVICE PARTS - ZT5400 REF NO PART NO. QTY. DESCRIPTION X5 1 AXLE CAP, ZT5400 (Hydro-Gear P/N 53724) X2 1 KIT, FILTER (Hydro-Gear P/N 71943) X4 1 KIT, SEAL, ZT5400 (Hydro-Gear P/N 71945) X6 1 KIT, CONTROL ARM SEAL (Hydro-Gear P/N 52989) X8 1 KIT, INPUT SHAFT (BEARING AND SHAFT ONLY) (Hydro-Gear P/N 71941) X7 1 KIT, INPUT SEAL (Hydro-Gear P/N 51280) X6 1 ASSM, HUB, STANDARD AXLE TRANSMISSIONS (ZT5400) (Hydro-Gear P/N 72039) X1 1 ASSM, HUB, LONG AXLE TRANSMISSIONS (ZT5400) (Hydro-Gear P/N 72102) X5 1 KIT, AXLE SEAL (Hydro-Gear P/N 53008) Footnotes
50 Wheel & Tire Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart
51 Wheel & Tire Group REF NO PART NO. QTY. DESCRIPTION NUT, 1/2-20, FOR WHEEL BOLT SILVER TIRE ASSM, 13 X 6.5-6, PNE / TB X72 2 BOLT, 1/2-13 X 9 GD5 CZ NUT, 1/2-13 HEX NYLOCK FLANGE WASHER, 1/2 SAE DEBRIS, COVER, CASTER WHEELS BEARING ADJUSTER, SPACER, LG NUT, BEARING ADJUSTER, AXLE TIRE/WHEEL ASM, 26X , TURF SMART TIRE, FRONT, 13 X 6.5 X 6 (SV) X1 2 WHEEL ASSEMBLY, FOR 13 X 6.5 X 6 TIRES (INCLUDES BEARING AND SEALS) SX2 4 BEARING, TAPERED ROLLER (SV) (2 per tire) SX3 4 GREASE SEAL (SV) (2 per tire) X1 2 WHEEL, 12 X 9.5, SOLD, 4.063" OFFSET (SV) X2 2 TIRE, TURF SMART, 26X PLY (SV) SX4 2 BEARING, RACE (SV) (Not illustrated) Footnotes
52 Decal Group - Brand & Model S/N: & Below NOTE: Unless noted otherwise, use the standard hardware torque specification chart
53 Decal Group - Brand & Model S/N: & Below REF NO PART NO. QTY. DESCRIPTION DECAL, FERRIS, FRONT BADGE DECAL, BADGE, IS3200Z, LH DECAL, BADGE, IS3200Z, RH DECAL, 61 (61" Models Only) DECAL, 72 (72" Models Only) DECAL, FERRIS, 2.23" X 11.39" DECAL, icd CUTTING SYSTEM Footnotes
54 Decal Group - Brand & Model S/N: & Above NOTE: Unless noted otherwise, use the standard hardware torque specification chart
55 Decal Group - Brand & Model S/N: & Above REF NO PART NO. QTY. DESCRIPTION DECAL, FERRIS LOGO, SMALL DECAL, MODEL, IS3200Z DECAL, TANK, MED, LH, FERRIS DECAL, TANK, MED, RH, FERRIS DECAL, FERRIS, 2.23" X 11.39" DECAL, 61 (61" Models Only) DECAL, 72 (72" Models Only) DECAL, icd CUTTING SYSTEM Footnotes
56 Decal Group - Safety & Operation (USA Models) NOTE: Unless noted otherwise, use the standard hardware torque specification chart
57 Decal Group - Safety & Operation (USA Models) REF NO PART NO. QTY. DESCRIPTION DECAL, MAIN SAFETY DECAL, PINCH POINT DECAL, DANGER DO NOT OPERATE W/O DEFLECT DECAL, WARNING, HAND IN BELT, ENG ONLY DECAL, MANUAL AVAIL IN SPANISH DECAL, WARNING, ROLL BAR DECAL, TRANSAXLE RELEASE, S200XT DECAL, FUEL VALVE DECAL, THROTTLE CONTROL DECAL, WARNING, FOLDING ROPS DECAL, WARNING, OVERHAND, ROPS DECAL, IGNITION SWITCH DECAL, HYDRAULIC OIL, SAE 20W50 (Located on cross rail by hydraulic tanks) DECAL, FUSE LOCATION, IS2100 (Located on cross rail above fuse block) DECAL, CUT HEIGHT, IS700/ZTS DECAL, BELT AND BLADE, IS3200Z DECAL, CAUTION, FOLDING ROPS DECAL, FUEL VALVE (CAL Models only) Footnotes
58 Decal Group - Safety & Operation (Export Models) NOTE: Unless noted otherwise, use the standard hardware torque specification chart
59 Decal Group - Safety & Operation (Export Models) REF NO PART NO. QTY. DESCRIPTION DECAL, MAIN SAFETY, ANSI CE DECAL, PINCH POINT, CE DECAL, CE DANGER DECAL, DISCHARGE SAFETY, EXPORT DECAL, PARKING BRAKE SYMBOLS DECAL, WARNING, ROLL BAR, CE DECAL, TRANSAXLE RELEASE, S200XT DECAL, FUEL VALVE DECAL, THROTTLE CONTROL DECAL, SAFETY, CE ROPS (SV) DECAL, SAFETY, CE ROPS, OBS (SV) DECAL, IGNITION SWITCH DECAL, HYDRAULIC OIL, SAE 20W50 (Located on cross rail by hydraulic tanks) DECAL, FUSE LOCATION, IS2100 (Located on cross rail above fuse block) DECAL, CUT HEIGHT, IS700/ZTS DECAL, BELT AND BLADE, IS3200Z DECAL, FIRE ANSI EXPORT Footnotes
60 61" Mower Deck Group - Rollers & Casters NOTE: Unless noted otherwise, use the standard hardware torque specification chart
61 61" Mower Deck Group - Rollers & Casters REF NO PART NO. QTY. DESCRIPTION ROLLER, DECK A 1 WELD, BRACKET, ROLLER PIN - BLK SPACER,.38 X.63 X NUT, 3/8-16 HEX NYLOCK FLANGE B 1 PLATE, BRACKET, ANTI-SCALP - RED X8 7 BOLT, 3/8-16 X 1 GD5 CZ WASHER, 3/8 SAE ROLLER, SMALL B 1 WELD, ANTI-SCALP BRACKET - RED B 1 PLATE, ANTI-SCALP SUPPORT - RED BOLT,3/8-16X1.00,RD SH SQ NK,GR 5,ZC/CL X44 2 BOLT, 3/8-16 X 5-1/2, CARRIAGE, GD5, CZ X10 1 BOLT, 3/8-16 X 1-1/4 GD5 CZ Footnotes
62 61" & 72" Mower Deck Group - Deck Hangers NOTE: Unless noted otherwise, use the standard hardware torque specification chart
63 61" & 72" Mower Deck Group - Deck Hangers REF NO PART NO. QTY. DESCRIPTION B 4 BRACKET, INNER TRUNION MOUNT - RED (S/N: & Below) B 4 BRACKET, OUTER TRUNION MOUNT - RED (S/N: & Below) X20 4 BOLT, 1/2-13 X 2-1/2 GD5 CZ X12 8 BOLT, 5/16-18 X 1-1/2 GD5 CZ (S/N: & Below) PIVOT, DECK LIFT TRUNION, GREASABLE SPACER,.52 X.87 X 1.25, CZ ADJUSTER, DECK LIFT, CZ EYE BOLT, 1/2-20X6", 2.5"THRD, NUT, 1/2-13 HEX NYLOCK FLANGE NUT, 5/16-18 HEX NYLOCK FLANGE (S/N: & Below) WASHER, 1/2 SAE WASHER, 5/16 SAE (S/N: & Below) NUT, 1/2-20 HEX JAM A 4 BRACKET, INNER TRUNION MOUNT - BLK (S/N: & Above) A 4 BRACKET, OUTER TRUNION MOUNT - BLK (S/N: & Above) X12 8 BOLT, 3/8-16 X 1-1/2 GD5 CZ (S/N: & Above) WASHER, 3/8 SAE (S/N: & Above) NUT, 3/8-16 HEX NYLOCK FLANGE (S/N: & Above) Footnotes
64 61" Mower Deck Group - Housing, Covers, Spindles & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart
65 61" Mower Deck Group - Housing, Covers, Spindles & Blades REF NO PART NO. QTY. DESCRIPTION DECK SHELL W/DECALS, 61, 3200-DOM ( B) SPINDLE, ASSM, CAST IRON S 1 BLADE SET, 61 DECK (3) (SV)(Set of 3 blades) B 1 GUARD, IS3200Z, LH 61" - RED B 1 GUARD, IS3200Z, RH 61" - RED A 1 SUPPORT, DISCHARGE CHUTE - BLK A 1 PLATE, SUPPORT - BLK A 1 WELD, MOUNT, DISCHARGE CHUTE - BLK A 1 PLATE, DEFLECTOR - BLK FLAP, STRIPER, 61 DECK, IS3100 S200X CHUTE, RUBBER DISCHARGE ( ) SAFETY WALK, 9.75 X ROD, MOUNT, CHUTE 61, CZ WASHER, BLADE BOLT, 9/16" F436, CZ X14 3 BOLT, 5/8-11 X 1-3/4 GD X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE /16 PUSH-ON NUT RETAINER, STL, CZ X8 6 BOLT, 5/16-18 X 1 GD5 CZ BODY CLIP, 5/ GA MATERIAL WASHER, 5/16 SAE NUT, 5/16-24 HEX NYLON LOCK SCREW, 5/16-18X0.750, GR5, WHIZ-LOCK, ZC X6 6 BOLT, 5/16-18 X 3/4 GD5 CZ X12 3 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ NUT, 5/16-18 HEX NYLOCK FLANGE X10 18 BOLT, 3/8-16 X 1-1/4, FLANGE, GD 5, CZ NUT, 3/8-16 HEX NYLOCK FLANGE DECK SHELL W/DECALS, 61, 3200-ANSI-EXP ( B) Footnotes
66 61" Mower Deck Group - Pulleys, Belt & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart
67 61" Mower Deck Group - Pulleys, Belt & Idler Arm REF NO PART NO. QTY. DESCRIPTION A 1 WELD, IDLER ARM - BLK X48 1 BOLT, 1/2-13 X 6 GD5 CZ X28 2 BOLT, 1/2-13 X 3-1/2 GD5 CZ X20 1 BOLT, 1/2-13 X 2-1/2 GD5 CZ X12 1 BOLT, 3/8-16 X 1-1/2 GD5 CZ X8 6 BOLT, 1/4-20 X 1 GD5 CZ SPACER,.52 X 1.00 X.50, CZ BEARING, /2", SEALED SPACER,.51 X.75 X 1.22, PM CZ SPACER, IDLER ARM, 1/2 X IDLER MOUNT,.88 HIGH SPRING, EXT, 1.5ODX12.25X.234WIRE BLK PULLEY, FLAT IDLER, 6-3/4" BELT, 5V, "EL, ARAMID, WRAP RC IDLER MOUNT PULLEY, DEEP V-IDLER, 6.25"OD X 1/2"ID SPACER,.52 X 1.00 X.56, PM, CZ SHIELD, PULLEY BEARING, CZ PULLEY, SPLIT STEEL, 6.432"OB, HQ BORE SPACER,.39 X 1.00 X.25, PM, CZ SPACER,.39 X.75 X.38, PM, CZ NUT, 1/2-13 HEX NYLOCK FLANGE NUT, 3/8-16 HEX NYLOCK FLANGE WASHER-3/8 FENDER WASHER, 1/2 SAE NUT, 3/8-16 HEX SERRATED FLANGE EYE BOLT, 3/8-16 X 5, 2.88THRD, 1EYE, CZ KEY 1/4 SQ X 1 1/2 LONG BUSHING, TAPERED HUB Footnotes
68 72" Mower Deck Group - Housing, Covers, Spindles & Blades NOTE: Unless noted otherwise, use the standard hardware torque specification chart
69 72" Mower Deck Group - Housing, Covers, Spindles & Blades REF NO PART NO. QTY. DESCRIPTION * DECK SHELL W/ DECALS, 72, 3200-DOM ( B - Domestic Models) * DECK SHELL W/ DECALS, 72, 3200, ANSI-EXP ( B - Ansi-Exp Models) B 1 GUARD, LH, IS3200Z-72 - RED B 1 GUARD, RH, IS3200Z-72 - RED A 1 SUPPORT, DICHARGE CHUTE, 61/72 - BLK (S/N: & Below) A 1 WELD, FRAME, CHUTE, 72 - BLK (S/N: & Below) A 1 PLATE, DEFLECTOR, 72 - BLK A 1 PLATE, SUPPORT, 72" - BLK SPINDLE, ASSM, CAST IRON ROD, MOUNT, CHUTE, 72, CZ (S/N: & Below) FLAP, STRIPER, 72 DECK S 1 BLADE SET, 72 DECK (SET OF THREE) CHUTE, DISCHARGE, BEND RUBBER (SV) (S/N: & Below)( ) SAFETY WALK, 9.75 X X10 18 BOLT, 3/8-16 X 1-1/4, FLANGE, GD 5, CZ WASHER, BLADE BOLT, 9/16" F436, CZ X14 3 BOLT, 5/8-11 X 1-3/4 GD X6 2 BOLT, 5/16-18 X 3/4, CARRIAGE X12 3 BOLT, 3/8-16 X 1-1/2 GD5 CZ (S/N: & Below) NUT, 3/8-16 HEX NYLOCK FLANGE BODY CLIP, 5/ GA MATERIAL /16 PUSH-ON NUT RETAINER, STL, CZ WASHER, 5/16 SAE NUT, 5/16-24 HEX NYLON LOCK WASHER, 5/16 F436 FLAT X8 6 BOLT, 5/16-18 X 1 GD5 CZ X10 6 BOLT, 5/16-18 X 1-1/4 GD5 CZ SCREW, 5/16-18X0.750, GR5, WHIZ-LOCK, ZC NUT, 5/16-18 HEX NYLOCK FLANGE A 1 WELD, MOUNT, DISCHARGE CHUTE - BLK (S/N: & Above) A 1 SUPPORT, DISCHARGE CHUTE - BLK (S/N: & Above) X12 3 BOLT, 3/8-16 X 1-1/2, CARRIAGE, GD5, CZ (S/N: & Above) CHUTE, RUBBER DISCHARGE (S/N: & Above)( ) ROD, MOUNT, CHUTE 61, CZ (S/N: & Above) Footnotes * If you replace the mower deck on a machine in the serial number range & Below you must also order the new discharge chute components
70 72" Mower Deck Group - Pulleys, Belt, & Idler Arm NOTE: Unless noted otherwise, use the standard hardware torque specification chart
71 72" Mower Deck Group - Pulleys, Belt, & Idler Arm REF NO PART NO. QTY. DESCRIPTION A 1 WELD, IDLER ARM, CUTTER DECKS - BLK SPACER,.52 X 1.00 X.50, CZ BEARING, /2", SEALED SPACER,.510 X.750 X 1.749, CZ SPACER, IDLER ARM, 1/2 X IDLER MOUNT,.88 HIGH SPRING, EXT, 1.5ODX12.25X.234WIRE BLK PULLEY, FLAT IDLER, 6-3/4" IDLER MOUNT (S/N: & Below) PULLEY, DEEP V-IDLER, 6.25"OD X 1/2"ID SPACER,.52 X 1.00 X.56, PM, CZ SHIELD, PULLEY BEARING, CZ SPACER,.38 X 1.13 X.781 STEP, CZ EYE BOLT, 3/8-16 X 4, 2.13THRD, 1 EYE,CZ PULLEY, 7.632"OB, HQ BORE, SPLIT STEEL KEY 1/4 SQ X 1 1/2 LONG BUSHING, TAPERED HUB X36 1 BOLT, 1/2-13 X 4-1/2 GD5 CZ X28 2 BOLT, 1/2-13 X 3-1/2 GD5 CZ X20 1 BOLT, 1/2-13 X 2-1/2 GD5 CZ X32 1 BOLT, 3/8-16 X 4 GD5 CZ X8 6 BOLT, 1/4-20 X 1 GD5 CZ WASHER-3/8 FENDER NUT, 3/8-16 HEX NYLOCK FLANGE NUT, 3/8-16 HEX SERRATED FLANGE NUT, 1/2-13 HEX NYLOCK FLANGE BELT, 5V, "EL, LRG ARAMID, WRP, RC IDLER MOUNT,.88 HIGH (S/N: & Above) Footnotes
Parts Manual. IS3200Z Series Zero-Turn Riding Mower
Parts Manual IS3200Z Series Zero-Turn Riding Mower Models: Description: 5901567 IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZKAV3561) 5901568 IS3200Z Series w/ 61" Mower Deck & ROPS (IS3200ZBVE3761)
More informationParts Manual. IS2100Z Series Zero-Turn Riding Mower
Parts Manual IS2100Z Series Zero-Turn Riding Mower Models: Description: 5901300 IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZBV2652) 5901301 IS2100Z Series w/ 52" Mower Deck & ROPS (IS2100ZKAV2652)
More informationModels: Description: F320Z Series w/ 72" icd Mower Deck (F320ZKAV3572) F320Z Series w/ 61" icd Mower Deck (F320ZBVE3761)
Parts Manual F320Z Series Zero-Turn Riding Mower Models: Description: F320Z Series w/ 72" icd Mower Deck (F320ZKAV3572) F320Z Series w/ 61" icd Mower Deck (F320ZBVE3761) F320Z Series w/ 61" icd Mower Deck
More informationReproduction. Not for. Parts Manual. S200XT Series Zero-Turn Riding Mower
Parts Manual S200XT Series Zero-Turn Riding Mower Models: Description: 5900504 S200XTBV32, Zero-Turn Rider 5900505 S200XT - 72" Mower Deck 5900582 S200XTB3061, 61" Zero-Turn Rider 5900583 S200XTB30, Zero-Turn
More informationReproduction. Not for. Parts Manual. IS700Z Series Zero-Turn Riding Mower
Parts Manual IS700Z Series Zero-Turn Riding Mower Models: Description: 5901214 IS700Z Series w/ 52" Side Discharge icd Mower Deck (IS700ZB2852) 5901215 IS700Z Series w/ 61" Side Discharge icd Mower Deck
More informationReproduction. Not for. Parts Manual. IS700Z Series Zero-Turn Riding Mower
Parts Manual IS700Z Series Zero-Turn Riding Mower Models: Description: 5901214 IS700Z Series w/ 52" Side Discharge icd Mower Deck (IS700ZB2852) 5901215 IS700Z Series w/ 61" Side Discharge icd Mower Deck
More informationReproduction. Not for. Parts Manual. S200XT Series Zero-Turn Riding Mower
Parts Manual S200XT Series Zero-Turn Riding Mower Models: Description: 5901280.2 S200XTB2761, 61" Zero-Turn Rider S/N: 2017681137 & Above 5901663 S200XTBV2661, 61" Zero-Turn Rider 5901664 S200XTKAV2661,
More informationHP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE) : 48" & 52" Rear Discharge Mower Deck Group - Discharge Chute [1/19] Page 1 of 38
5900992-26 HP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE) : 48" & 52" Rear Discharge Mower Deck Group - Discharge Chute [1/19] Page 1 of 38 5900992-26 HP Kawasaki w/ 52" RD Mower Deck (CCWKAV2652RDCE)
More informationParts Manual. S50X Series Zero-Turn Riding Mower. Models:
Parts Manual S50X Series Zero-Turn Riding Mower Models: Description: S50XBS1948, 48" 19HP Kawasaki Mid Mount Zero-Turn Rider S50XKAV1936OS, 36" 19HP Mid mount Zero-Turn Rider S50XKAV1936OS CAL, 36" 19HP
More informationModels: Description: F210Z Series w/ 61" icd Mower Deck (F210ZKAV2661) F210Z Series w/ 61" icd Mower Deck (F210ZBVE2861)
Parts Manual F210Z Series Zero-Turn Riding Mower Models: Description: F210Z Series w/ 61" icd Mower Deck (F210ZKAV2661) F210Z Series w/ 61" icd Mower Deck (F210ZBVE2861) F210Z Series w/ 61" icd Mower Deck
More informationReproduction. Not for. ZT3500 Series Zero-Turn Riding Mower. Parts Manual. Products
Parts Manual Products ZT3500 Series Zero-Turn Riding Mower Mfg. No. Description 5900506 ZT3500, 24HP Briggs & Stratton w/ 48" Mower (ZT3500B2448) 5900521 ZT3500, 27HP Briggs & Stratton w/ 48" Mower (ZT3500B2748)
More informationReproduction. Not for. Parts Manual. S200XT Series Zero-Turn Riding Mower. Models:
Parts Manual S200XT Series Zero-Turn Riding Mower Models: Description: 5900504 S200XTBV32, Zero-Turn Rider 5900830 S200XTBV2861, 61" Zero-Turn Rider 5900937 S200XTKAV2661, 61" Zero-Turn Rider 5900951 S200XTBV3261,
More informationReproduction. Not for. Parts Manual. IS1500ZX Series Zero-Turn Riding Mower
Parts Manual IS1500ZX Series Zero-Turn Riding Mower Models: Description: 5900303 IS1500ZX Series w/ 52" icd Mower Deck & ROPS (IS1500ZXKAV2452CE) 5900535 IS1500ZX Series w/ 61" icd Mower Deck & ROPS (IS1500ZXKAV2461)
More informationReproduction. Not for. Parts Manual. CCW Series Walk-Behind Mower
Parts Manual CCW Series Walk-Behind Mower Models: Description: 5900552 Comfort Control DD w/ 48" Side Discharge Mower Deck & Kawasaki Engine (CCWKAV2148) 5900553 Comfort Control DD w/ 52" Side Discharge
More informationReproduction. Not for. Parts Manual. S125XT Series Zero-Turn Riding Mowers
Parts Manual S125XT Series Zero-Turn Riding Mowers Models: Description: 5901246 S125XTB2552, 52" Mid-Mount Zero-Turn Rider 5901247 S125XTKAV2352, 52" Mid-Mount Zero-Turn Rider 5901248 S125XTB2761, 61"
More informationReproduction. Not for. Parts Manual. IS1500Z Series Zero-Turn Riding Mower
Parts Manual IS1500Z Series Zero-Turn Riding Mower Models: Description: 5900575 IS1500Z Series w/ 44" Flat-Nosed Mower Deck & ROPS (IS1500ZKAV1944) 5900576 IS1500Z Series w/ 48" icd Mower Deck & ROPS (IS1500ZKAV1948)
More informationModels: Description: FW35 Series w/ 61" Mower Deck (FW35KAV STATE) FW35 Series w/ 52" Mower Deck (FW35KAV STATE)
Parts Manual FW35 Series Walk Behind Mower Models: Description: 5901318 FW35 Series w/ 61" Mower Deck (FW35KAV2461 49 STATE) 5901319 FW35 Series w/ 52" Mower Deck (FW35KAV2152 49 STATE) 5901320 FW35 Series
More informationMfg. No: IS600Z Series w/ 44" Rear Discharge
Parts Manual Mfg. No: 5901309 IS600Z Series w/ 44" Rear Discharge Copyright Briggs and Stratton. All Rights reserved 20-Sep-2017 Model Components Table Of Contents Page 44" & 48" Mower Deck - Hanger Chains.................................................................
More informationReproduction. Not for. Parts Manual. SW25 Series Walk Behind Mower
Parts Manual SW25 Series Walk Behind Mower Models: Description: 5901435 SW25KAV1536, 36" Walk Behind Mower 5901436 SW25CCKAV1936, 36" Walk Behind Mower 5901437 SW25KAV1548, 48" Walk Behind Mower 5901438
More informationHYDRO DRIVE ZTR 350Z/400Z SERIES 1
Parts Manual for HYDRO DRIVE ZTR 350Z/400Z SERIES 1 MODEL ZT18441KHC (5900608) ZT19441KWV (5900609) ZT20501BV (5900610) EZT20501BV (5901166) 400ZB2450 (5900706) McDonough, GA, 30253 U.S.A. Briggs & Startton
More informationMfg. No: SRS Z1 Series w/ 48" Rear Discharge
Parts Manual Mfg. No: 5901677 SRS Z1 Series w/ 48" Rear Discharge Copyright Briggs and Stratton. All Rights reserved 20-Sep-2018 Model Components Table Of Contents Page 48" Mower Deck - Housing, Covers,
More informationModels: Description: Evolution Series w/ 52" Mower Deck (EVKAV2452) Evolution Series w/ 52" Mower Deck (EVKAV2652)
Parts Manual Evolution Series Zero-Turn Riding Mower Models: Description: 5900558 Evolution Series w/ 52" Mower Deck (EVKAV2452) 5900858 Evolution Series w/ 52" Mower Deck (EVKAV2652) 5900930 Evolution
More informationMfg. No: Procut S Series (H2227B)
Parts Manual Mfg. No: 5901279 Procut S Series (H2227B) Copyright Briggs and Stratton. All Rights reserved 13-Jul-2017 Model Components Table Of Contents Page Actuator Group.......................................................................................
More informationReproduction. Not for. Parts Manual. IS5100Z Series Zero-Turn Riding Mower
Parts Manual IS5100Z Series Zero-Turn Riding Mower Models: Description: 5900602 IS5100Z Series w/ Caterpillar Diesel & ROPS (IS5100Z/C33D) 5900617 IS5100Z Series w/ Caterpillar Diesel & ROPS Export (IS5100Z/C33DCE)
More information24 HP & 25 HP HYDRO DRIVE ZTR 550Z SERIES. Parts Manual for
Parts Manual for 24 HP & 25 HP HYDRO DRIVE ZTR 550Z SERIES Model No. Description 5901401 550ZB2552 5901252 550ZB2561 5901402 550ZB2561 5901400 550ZKAV2452 5901251 550ZKAV2461 5901404 ZTX550 Briggs & Stratton
More informationParts Manual. ProCut 20 Series 3-Wheel Riding Mower Serial No & Above. Models: H2220K R52 R61
Parts Manual ProCut 20 Series 3-Wheel Riding Mower Serial No. 7671 & Above Models: H2220K R52 R61 Ferris Industries 5375 North Main Street Munnsville, NY 13409 USA 800-933-6175 5022204 Revision 07 Rev.
More informationParts Manual. IS5100Z Series Zero-Turn Riding Mower
Parts Manual IS5100Z Series Zero-Turn Riding Mower Models: Description: 5900507 IS5100Z Series w/ Caterpillar Diesel & ROPS Export (IS5100ZC33D ANSI) 5900591 72" Side Discharge icd Mower Deck (5100/72)
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More information26HP HYDRO DRIVE MID-MOUNT ZTR 355Z SERIES
Parts Manual for 355Z SERIES MODEL 355ZB2654 (5900748) Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, 30253 U.S.A. 800-935-2967 Revision D, 6/9/2008 Table Of Contents PAGE GROUP
More informationReproduction. Not for. Parts Manual. IS2500Z Series Zero-Turn Riding Mower
Parts Manual IS2500Z Series Zero-Turn Riding Mower Models: Description: 5900500 IS2500Z Series w/ 52" Side Discharge Mower Deck & ROPS (IS2500ZY24D52) 5900781 IS2500Z Series w/ 52" Rear Discharge Mower
More informationHydro Cut Series Walk-Behind Mowers
Parts Manual HP Product Mfg. No. Description 92 Hydro Cut, HP Kawasaki, 2 inch (CE) Hydro Cut Series Walk-Behind Mowers Rev. 0/200 Table Of Contents PRODUCT COMPONENTS PAGES Engine Deck & Handle Bars
More informationHYDRO DRIVE ZTR 350Z/400Z SERIES 1
Parts Manual for HYDRO DRIVE ZTR 350Z/400Z SERIES 1 Model No. Description 5900706 400ZB2450 5901166 EZT20501BV 5900608 ZT18441KHC 5900609 ZT19441KWV 5900610 ZT20501BV Briggs & Stratton Yard Power Products
More informationDescription: SW30KAV1852, 52" Walk Behind Mower SW30KAV2061, 61" Walk Behind Mower
Parts Manual SW30 Series Walk-Behind Mowers Models: Description: 5900855 SW30KAV1852, 52" Walk Behind Mower 5900856 SW30KAV2061, 61" Walk Behind Mower 5900887 SW30KAV2052, 52" Walk Behind Mower 5900899
More informationReproduction. Not for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES. Parts Manual for ZT2246
Parts Manual for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES Model No. Description 2691316-00 ZT2246 Briggs & Stratton Yard Power Products Group 3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 U.S.A. 800-935-2967
More informationParts Manual PZ Please read the operator manual carefully and make sure you understand the instructions before using the machine.
Parts Manual PZ 60 967 045601-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service questions,
More informationReproduction. Not for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES. Parts Manual for ZT2246
Parts Manual for HYDRO DRIVE 46" 22 HP ZTR 360Z SERIES Model No. Description 2691316-00 ZT2246 Briggs & Stratton Yard Power Products Group 3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 U.S.A. 800-935-2967
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
More informationRZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0
Parts Manual for RZT TWIN STICK HYDRO DRIVE 250 Z 44" & 50" SERIES 0 MODEL ERZT185440BVE RZT22500BVE2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1,
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More informationParts List for Sentar (For Serial Numbers Prior to 19729)
Parts List for Sentar (For Serial Numbers Prior to 19729) Replace with newer revisions as they become available 2006 Wright Manufacturing, Inc. All rights reserved Updated 08/2006 52", 61" CUTTER DECKS
More informationParts Manual. UltraBelt GD Walk Behind Mower
Parts Manual UltraBelt GD Walk Behind Mower Models: Description: UltraBelt GD, 14HP Kohler w/ 36" Mower Deck 5900027 15HP Kawasaki V-Twin w/ 36" Mower Deck (AV15) 5900030 15HP Kawasaki V-Twin w/ 48" Mower
More informationPacer Series Transaxle Drive Walk-Behind Mower
Parts Manual Pacer Series Transaxle Drive Walk-Behind Mower 15HP Product Mfg. No. Description 1694895 Pacer, 15HP B&S Walk-Behind 2690447 Pacer, 15HP B&S w/34" Deck 17HP Product Mfg. No. Description 5900630
More informationParts Manual P-ZT54 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual P-ZT54 / 9913402 Please
More informationParts Manual DX272 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX22 / 966651501 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationMZ 52LE. Parts Manual. Zero Turn Mower /
Parts Manual MZ 52LE Zero Turn Mower / 9677406-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts Manual P-ZT4822 / P-ZT5224 / P-ZT6126 / P-ZT6128BS / P-ZT26 BF / P-ZT4822 CARB /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual P-ZT4822 / 966613301
More informationPARTS LIST. Reproduction. Not for. Mower Decks. Mfg. No. Description EZM2042, 20HP B&S w/42" Mower Deck (2009)
PARTS LIST Mower Decks Mfg. No. Description 7800490 EZM2042, 20HP B&S w/42" Mower Deck (2009) Manual Part No. Revision A Rev. Date: 11/5/2009 Table Of Contents PRODUCT COMPONENTS PAGES Frame, Body & Seat
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationParts Manual Rev. B RZT48 /
115 91 36-2 Rev. B Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationParts Manual MZ52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ52 / 962401 Please
More informationParts Manual Rev. A RZT54 /
115 93 37-27 Rev. A Parts Manual RZT54 / 967 672101-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationM-ZT 61. Parts Manual. Zero Turn Mower /
Parts Manual M-ZT 61 Zero Turn Mower / 967177008-01 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts List Wright Stander Rapid-Hite Mower (For Serial Numbers and Higher Until Superseded)
Parts List Wright Stander Rapid-Hite Mower (For Serial Numbers 33615 and Higher Until Superseded) Replace with newer revisions as they become available 2007 Wright Manufacturing, Inc. All rights reserved
More informationParts Manual Rev. A RZT48 /
115 91 36-2 Rev. A Parts Manual RZT48 / 96 62001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of 10%
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationParts List for all Sentar Sport models For Sentar Sport serial #33615 and higher until superseded
Parts List for all Sentar Sport models For Sentar Sport serial #33615 and higher until superseded WRIGHT MANUFACTURING, INC. - 4600X WEDGEWOOD BLVD - FREDERICK, MD 21703 Revised 01/2007 36" CUTTER DECK
More informationReproduction. Not for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES. Parts Manual for RE210
Parts Manual for REAR ENGINE RIDER HYDRO DRIVE 33" 15.5 TP RE SERIES Model No. Description 7800952-00 RE210 Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, 30253 U.S.A. 800-935-2967
More informationRZ3016. Parts Manual. Zero Turn Mower /
Parts Manual RZ30 Zero Turn Mower / 966612302-04 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in
More informationSCRAMBLER 33" & 38" HYDRO DRIVE YZ SERIES 5 & 6
Parts Manual for SERIES 5 & 6 MODEL YZ16335BVE YZ16385BVE YZ18336BVE YZ18386BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 3, 7/26/2005 Table Of Contents
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationParts Manual MZ5225 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225 / 966690502 Please
More informationWYZ34FS600VCA FOR SERIAL NUMBERS U02011 AND ABOVE
PARTS MANUAL WYZ34FS600V WYZ34FS600VCA FOR SERIAL NUMBERS 201610U02011 AND ABOVE 2 3 4 CONTENTS GENERAL INFORMATION... 6 SERVICE LOCATOR CHART... 7 DECK ASSEMBLY... 8 DECK LIFT ASSEMBLY... 10 FRAME ASSEMBLY...
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationPARTS MANUAL EE60FX730V34CA EE52FX691V34CA
PARTS MANUAL EE48FR691V32 EE48FR691V32CA EE60FX730V34 EE60FX730V34CA EE52FR691V32 EE52FR691V32CA EE52FX691V34 EE52FX691V34CA 2 WWW.ENCOREEQUIPMENT.COM 401 COMMERCE STREET BEATRICE, NE 68310 800-267-4255
More information72K850ZP PARTS MANUAL
7 2 K 8 5 0 Z P PARTS MANUAL 72 MID-CUT GAS ENGINE OPTION SECTION 72 MID-CUT DECK ASSEMBLY 72" Mid-Cut Deck Assembly # PART NO. QTY DESCRIPTION 1 582096 1 72" MC DECK WELDMENT 2 582098 1 72" DECK CHANNEL
More informationYARD CRUISER HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4
Parts Manual for HYDRO DRIVE HZ SERIES 3 & YZ SERIES 4 MODEL HZS15423KVE HZS18483BVE YZ16424BVE YZ20484BVE McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision
More informationZERO TURN HYDRO DRIVE 20 & 24 HP 42" & 50" 150Z SERIES
Parts Manual for ZERO TURN HYDRO DRIVE 20 & 24 HP 42" & 50" 150Z SERIES MODEL ZT2042150ZBVE (2690645) ZT2450150ZBVE (2690647) McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright
More informationParts Manual M-ZT52 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual M-ZT52 / 961001 Please
More informationParts Manual Zero Turn Mower / Z 248F
Parts Manual Zero Turn Mower / Z 248F 967262501-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support
More informationParts Manual ZMKW 5222 / ZMKW 6124 /
Parts Manual ZMKW 222 / 6647801 ZMKW 6124 / 664701 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. MODEL When you need spare parts or
More informationParts Manual MZ5424SR /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ2SR / 9700902 Please
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationSpartan Mower Parts Manual SRT
Spartan Mower Parts Manual SRT Revision Date -- TABLE OF CONTENTS SRT Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationSpartan Mower Parts Manual RT
Spartan Mower Parts Manual RT Revision Date -- TABLE OF CONTENTS Front Fork Assembly... Brake and Floor Board assembly...- Height Indicator Assembly....- Actuator Assembly. Battery and Seat Suspension
More informationWYDB60FS691V34 WYDB60FS691V34CA WYDB52FR691V32CA WYDB52FX691V34CA WYDB60FX691V34 WYDB60FX691V34CA PARTS MANUAL
WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA WYDB60FX691V34
More informationELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES
Parts Manual for ELECTRIC CLUTCH HYDRO DRIVE RMO TRACTORS LT-200 SERIES MODEL ELT18538 (2690497) ELT2044 (2690498) LT18538 (2690440) LT18500 (2690518) LT2042 (2690441) LT2044 (2690442) LT22500 (2690443)
More informationParts manual MANUAL NO REV. 04 (12/14/00)
Parts manual Models: 968999159 / ZTH5221KAA 968999160 / ZTH5223KAA 968999161 / ZTH5223KOA 968999162 / ZTH5223KOLA 968999163 / ZTH5225KOA 968999165 / ZTH6125KOA 968999166 / ZTH6125KAA 968999171 / ZTH6126KOA
More informationParts Manual MZ5225ZT / MZ6128ZT / MZ6128ZT /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual MZ5225ZT / 966690501
More informationLAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES "G" MODEL ELT145H33GBV LT145H33GBV LT145H38GBV LT150H38GKV WLT145H38GKV McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS, INC.
More informationPlease read the operator manual carefully and make sure you understand the instructions before using the machine.
967327901-00 Parts Zero Manual Turn Mower Please read the operator manual carefully and make sure you understand the instructions before using the machine. When you need spare parts or support in service
More informationPARTS MANUAL WYDB60FX691V34CA WYDB52FX691V34E
PARTS MANUAL WYDB48FR691V32 WYDB48FR691V32CA WYDB52FR691V32 WYDB52FR691V32CA WYDB52FS691V34 WYDB52FS691V34CA WYDB52CT810V34 WYDB52CT810V34CA WYDB60FS691V34 WYDB60FS691V34CA WYDB52FX691V34 WYDB52FX691V34CA
More informationYARD CRUISER HYDRO DRIVE HZ SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE HZ SERIES 1 & 2 MODELS HZS11BVE HZS181BVE HZS1521KVE HZS1522KVE HZS1681BVE HZS1882BVE TM HZS11BE Model shown CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS-
More informationParts Manual DX254 / Please read the operator s manual carefully and make sure you understand the instructions before using the machine.
Parts Manual DX254 / 966651203 Please read the operator s manual carefully and make sure you understand the instructions before using the machine. Gasoline containing up to 10% ethanol (E10) is acceptable
More informationWorldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE Toll Free Number:
Parts Catalog R WYRZ46S/50U/60U Residential Zero Turn Mower Worldlawn Power Equipment, Inc. Industrial Park 2415 Ashland Ave. Beatrice, NE 68310 Toll Free Number: 1-800-267-4255 Table of Contents Table
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationParts Manual Rev. 3
114 08 93-27 Rev. 3 Parts Manual Z 254F / 967954001-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationParts Manual PZ60 /
Gasoline containing up to 10% ethanol (E10) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (E10) will void the product warranty. Parts Manual PZ60 / 966614301 Please
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationWYS52FX730VCA FOR SERIAL NUMBERS U00681 AND ABOVE
PARTS MANUAL WYS52FX730V WYS52FX730VCA FOR SERIAL NUMBERS 201312U00681 AND ABOVE 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationER48FX730VLCA ER52FX730VL ER52FX730VLCA
PARTS MANUAL ER48FX730VL ER48FX730VLCA ER52FX730VL ER52FX730VLCA 2 ENCORE MANUFACTURING A DIVISION OF WORLDLAWN POWER EQUIPMENT, INC. ENCOREEQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255
More informationParts Manual Rev. A
115 97 25-27 Rev. A Parts Manual Z 242F / 967 844702-00 Please read the operator manual carefully and make sure you understand the instructions before using the machine. Gasoline containing a maximum of
More informationParts Manual. Models: / Z4818BIA MANUAL NO REV. IR (09/18/04)
Parts Manual Models: 968999250 / Z4818BIA MANUAL NO. 539109796 REV. IR (09/18/04) 2 INDEX MAIN FRAME ASSEMBLY... 4-5 BRAKE LINKAGE... 6 CONSOLE ASSEMBLY... 7 CASTER ASSEMBLY... 8 MOTION CONTROL ASSEMBLY...
More informationILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: with a serial number of D to D
IPL MODEL STC-2BV/2BS 7 0 2 8 0 5 2 ILLUSTRATED PARTS LIST THIS MANUAL CONTAINS THE ILLUSTRATED PARTS LIST FOR MODELS: STC8V-2BS STC52V-2BV STCV-2BV SMTC-8V SMWC-52V SMWC-V with a serial number of D0000
More informationPRO HYDRO WALK BEHIND MOWERS MID-SIZE SERIES 3
Parts Manual for MID-SIZE SERIES 3 POWER UNIT MODELS SPLH153KW SPLH173KW MOWER MODELS SPA361 SPA481 SPA521 SPA611 McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED.
More informationIPL ILLUSTRATED PARTS MANUAL. Model SWZT Walk-Behind. with a serial number of K to K Part No Printed 12/13 Printed in USA
IPL 0 0 ILLUSTRATED PARTS MANUAL Model SWZT Walk-Behind This manual contains the illustrated parts list for MODELS: SWZT-fs with a serial number of J0000 to J SWZT-fs with a serial number of J0000 to J
More information