RZ3016. Parts Manual. Zero Turn Mower /

Transcription

1 Parts Manual RZ30 Zero Turn Mower / Please read the operator manual carefully and make sure you understand the instructions before using the machine.

2 When you need spare parts or support in service questions, warranty issues, etc., please consult the following professional: This manual belongs to the machine with the manufacturing number: Engine Transmission Manufacturing Number The machine s manufacturing number can be found on the printed plate affixed to the engine compartment. Stated on the plate, from the top are: The machine s type designation (I.D.). The manufacturer s type number (Model). The machine s serial number (Serial no.) Please have the type designation and serial number available when ordering spare parts. The engine s manufacturing number is stamped on one of the valve covers. The plate states: The engine s model. The engine s type. Code Please have these available when ordering spare parts. The wheel motors and hydrostatic pumps have a barcode decal affixed at the rear. Accessories Available Collection System Mulch Kit All rights reserved. Orangeburg, SC. Printed in U.S.A.

3 CONTENTS FRAME... 4 ENGINE PLATE... 6 STEERING... 8 IGNITION SYSTEM HYDRAULIC PUMP / MOTOR WHEELS / TIRES BRAKE / DECK LIFT... MOWER DECK / CUTTING DECK SEAT DECALS ACCESSORIES BAGGER...24 MOUNTS, CHUTES, WEIGHTS...26 MULCH KIT...28 Illustrations may or may not represent the actual assemblies and it is not recommended to use this manual as a guide to assemble or disassemble the mower. NOTE: All fasteners are Grade 5 unless otherwise specified.

4 FRAME

5 FRAME ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FRAME TUBE, LT ORG FRAME TUBE, RT ORG BAR, IMPACT ORG PANEL, SEAT SUPPORT ORG FOOT PLATE w/decals ORG FOOT REST ORG BRACKET, FRONT DECK BLK FOAM STRIP SUPPORT, TANK BLK PLATE, RT ORG PLATE, LT ORG STUD w/ ANTI-ROTATE GROMMET, BUMPER RETAINER, U TYPE HAIRPIN BOLT 5 /-18 x 2¼ HEX HD BOLT 3 /8- x 2¼ HEX HD BOLT 5 /-18 x ¾ HEX HD BOLT 5 /-18 x 2¾ HEX HD BOLT 3 /8- x 2¾ HEX FLG HD BOLT 3 /8- x ¾ RD HD SQNK BOLT 5 /-18 x ¾ RD HD SQNK BOLT 3 /8- x 1 RD HD SQNK SCREW ¼-20 x 5 /8 SLF TAP WASHER 5 /8 SAE FLT WASHER 5 / SAE FLT WASHER 3 /8 SAE FLT NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX JAM NYLOC NUT 3 /8- HEX FLG NYLOC 5

6 ENGINE PLATE

7 ENGINE PLATE ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION PLATE, ENGINE ORG PULLEY, IDLER PULLEY, ENGINE IDLER, BLK KEY ¼ SQ x 2½ LG SPRING 3½ GUIDE, BELT BUSHING, METAL BOLT 5 /-18 x 2 HEX HD BOLT 3 /8- x 2 HEX HD BOLT 5 /-18 x 2¼ HEX HD BOLT 7 /-20 x 2¾ HEX HD BOLT 3 /8- x 1½ HEX HD BOLT 3 /8- x 1 THD FRM SCREW 3 /8- x 1 THD FRM WASHER 3 /8 FLT STD WASHER WASHER 5 / SAE FLT NUT 5 /-18 HEX NYLOC NUT 5 /-18 HEX WHIZLK NUT 3 / 8- HEX JAM NYLOC NUT 3 /8- HEX FLG NYLOC NUT 3 /8- HEX NYLOC NOT SHOWN ENGINE, B&S.5 HP For engine service and replacement parts, see a Briggs & Stratton dealer 7

8 STEERING

9 STEERING ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION LOWER LEVER, RT LOWER LEVER, LT STOP, STEER CNTRL RT STOP, STEER CNTRL LT PIVOT, RT PIVOT, LT GRIP LEVER, UPPER DAMPENER BUSHING ½ ID x ¾ OD BUSHING ZERK BOLT 5 /-18 x 1½ HEX HD BOLT ½-13 x 2¾ HEX HD BOLT 5 /-18 x 1 HEX HD BOLT 5 /-18 x 2 HEX HD BOLT ¼-20 x 1¾ HEX HD BOLT 5 /-18 x ¾ RD HD SQNK BOLT 5 /-18 x 2½ HEX TPBLT WASHER ½ SAE WASHER 5 /8 BELLEVILLE WASHER, SPECIAL WASHER 5 / SAE FLT NUT 5 /-18 HEX NUT 5 /-18 HEX WHIZLK NUT 5 /-18 HEX NYLOC NUT ½-13 JAM NYLOC GR NUT 5 /8-11 NYLOC NUT ¼-20 JAM NUT 5 /-18 HEX FLG NYLOC 9

10 10 IGNITION SYSTEM

11 IGNITION SYSTEM ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION FENDER, RT FENDER, LT SWITCH SWITCH, IGNITION SWITCH, INTERLOCK SOLENOID BATTERY HOLD DOWN, BATTERY PANEL, CONTROL CABLE, THROTTLE CABLE, CLUTCH CLUTCH ASSY w/ CABLE KNOB, CLUTCH KNOB TANK ASSY, FUEL CAP, FUEL w/ TETHER ELBOW CANISTER, CARBON BRACKET, CANISTER GROMMET GROMMET VALVE, FUEL VALVE, FUEL CHECK CLAMP, HOSE WIRE TIE w/ CLIP HOSE, FUEL 3 / x 39" HOSE, FUEL 3 / x 20" HOSE ¼ x HOSE, ¼ x CABLE, POSITIVE 31" CABLE, POSITIVE 19" CABLE, NEGATIVE 25" COVER, TERMINAL SM KEY, IGNITION BOLT ¼-20 x ¾ HEX HD BOLT 5 /-18 x 5 /8 HEX HD BOLT ¼ x 7½ HEX WSH HD BOLT 5 /-18 x ¾ RD HD SQNK BOLT ¼-20 x ¾ RD HD GR SCREW #10-24 x 5 / SCREW ¼-20 x 5 /8 SLF TAP WASHER ¼ FLT SAE NUT 5 /-18 HEX FLG NYLOC NUT ¼ PUSH NYLON NUT #10-24 HEX NYLOC NUT ¼-20 HEX NYLOC NOT SHOWN WIRING HARNESS 11

12 HYDRAULIC PUMP / MOTOR

13 HYDRAULIC PUMP / MOTOR ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION HYDRO, RH HYDRO, LH ROD END, RH ROD END, MALE LH RELEASE HANDLE, RH RELEASE HANDLE, LH BELT, EZT SPACER, HYDRO SPACER, WHEEL ROD, CONTROL ROD END COUPLER BOLT 5 /-18 x 2¾ HEX HD BOLT 5 /-18 x 2¼ HEX HD BOLT 5 /-18 x 1 HEX HD BOLT 3 /8- x 2¼ HEX HD NUT 5 /-18 HEX FLG NYLOC NUT 5 /-24 HEX JAM NUT 5 /-24 HEX JAM LH WASHER 3 /8 STD FLT WASHER 5 / SAE FLT HAIRPIN COTTER 13

14 WHEELS / TIRES

15 WHEELS / TIRES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION WHEEL ASSY REAR CASTER TIRE ASSY YOKE, CASTER ORG ZERK BUSHING, CASTER SPACER SPACER 5 / BEARING, FLANGED SPRING, CASTER CAP, GREASE PLUG, CASTER BOLT ½-13 x 6½ RD HD SQNK BOLT 5 /-18 x 1 HEX w/ NYLON NUT ½ HEX CNTRLK NUT ½-20 LUG WASHER ½ FLT WASHER 15

16 BRAKE / DECK LIFT

17 BRAKE / DECK LIFT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION ARM, LIFT BLK SHAFT, LIFT BLK LINKAGE, BRAKE RT LINKAGE, BRAKE LT LINKAGE, UPPER PIVOT, BRAKE ARM HANDLE, BRAKE BELLCRANK, BRAKE ROD, BRAKE GRIP, LIFT HANDLE GRIP, BRAKE HANDLE SWIVEL, BRAKE SWIVEL SPRING L-ROD 3½" HAIRPIN COTTER HAIRPIN BUSHING, PLASTIC PIN 3 / x 1¼ ROLL BOLT 3 /8- x 1¼ RD HD SQNK SCREW #10-24 X 5 /8 WSH HD NUT 5 /-18 HEX NYLOC NUT 3 /8- HEX JAM NYLOC NUT 3 /8- HEX NYLOC WASHER 3 /8 FLT STD WASHER 5 / SAE FLT WASHER,.825 WAVE WASHER 7 / SPRING DISK 17

18 18 MOWER DECK / CUTTING DECK

19 MOWER DECK / CUTTING DECK ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECK w/ SAFETY DECALS PULLEY, MANDREL PULLEY, IDLER PULLEY, DECK IDLER IDLER, V-GROOVE COVER, PULLEY KEEPER, BELT KEEPER, BELT GUIDE, BELT ARM, IDLER BLK ARM, LT BRAKE BLADE, MOWER/MULCH SWIVEL BEARING, BALL BRACKET, DEFLECTOR LINK, SUSPENSION SPACER RETAINER SPACER 2¼ SPRING, RETURN SPRING, TORSION MANDREL DEFLECTOR SHAFT BELT, DECK ARM, DECK SUSPENSION COUPLING, QUICK DISC PORT, WASHOUT HAIRPIN COTTER HAIRPIN PIN, CLEVIS 5 / RETAINER BOLT 3 /8- x 1 ¾ WHIZLK BOLT 3 /8- x 3 /8 SKT HD BOLT 3 /8- x 1½ THD FRM BOLT 3 /8- x 2 HEX HD BOLT 3 /8- x 4 RD HD SQNK BOLT 5 /-18 x 5 /8 RD HD SQNK SCREW 5 /-18 WASHER HD SCREW ¼-20 x ½ THDROLL BOLT/WASHER NUT 7 /-20 HEX NYLOC NUT 9 / TOP CNTRLK NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX FLG NYLOC NUT 3 /8- HEX JAM WASHER/SPACER WASHER 3 /8 x ¾ WASHER ½ SAE WASHER 1¾ x ¼ HEAVY WASHER 3 /8 FLT STD WASHER 7 / FLT WASHER 3 /8 SAE FLT 19

20 SEAT

21 SEAT ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION SEAT PLATE, SEAT ORG SUPPORT, REAR SEAT ORG BRACKET, FUEL TANK BLK SPRING, SEAT SPRING, SEAT SLIDE HANDLE, SEAT SLIDE CAP, SPRING SWITCH, SEAT N/C STOP, SEAT BLK BOLT 5 /-SHOULDER BOLT 5 /-18 x 1 HEX HD BOLT 3 /8- x 5 /8 HEX HD BOLT 3 /8- x ¾ RD HD SQNK SCREW ¼-20 x 5 /8 SLF TAP NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX FLG NYLOC 21

22 DECALS

23 DECALS ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION DECAL, BELT ROUTING DECAL, SAFETY WARNING DECAL, START DECAL, PARK BRAKE DECAL, CROWN DECAL, BLADE WARN DECAL, SERVICE DECAL, BATTERY WARNING DECAL, DO NOT TOW DECAL, HUSQVARNA DECAL, SEVERING DECAL, CONTROL PANEL DECAL, DECK HEIGHT DECAL, BLADE ENGAGE DECAL, MOTION CONTROL DECAL, DEFLECT CAUTION DECAL, RZ DECAL, PROP DECAL, SPARK ARRESTOR PAD, ABRASIVE PAD, FOOT 23

24 ACCESSORIES BAGGER

25 ACCESSORIES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION COVER ASSY, COMPLETE CONTAINER, SOFT BAG SCREEN, COVER BAGGER, FRAME STRIP, REINFORCEMENT LATCH HANDLE, COVER GASKET SPRING, COVER LH SPRING, COVER RH SPACER, COVER HAIRPIN, RETAINER CAP, TUBING END SPACER PLUG PIN, HINGE SCREW #10-24 x 5 / SCREW #10-24 x ¾ NUT #10-24 HEX NYLOC NUT #10-24 ACORN WASHER #10 FLT 25

26 ACCESSORIES MOUNTS, CHUTES, WEIGHTS

27 ACCESSORIES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION GUARD, REAR CHUTE, LOWER CHUTE, UPPER BRACKET, HANGER BRACKET, WEIGHT BAG INDICATOR CAST WEIGHT EXTENSION, MUFFLER LATCH, HOOD SPACER, SPLIT WELDNUT, PLATED LATCH ASSY PIN, CLEVIS 5 / x COTTER HAIRPIN BOLT 5 /-18 x ¾ HEX HD BOLT 3 /8- x 2¼ HEX HD BOLT 3 /8- x ¾ RD HD SQNK BOLT 5 /-18 x ¾ RD HD SQNK BOLT 3 /8- x 1 RD HD SQNK BOLT 3 /8- x 1¼ RD HD SQNK SCREW #10-24 x 1 1 / SCREW #10-24 x SCREW, HEX WASHER HD SCREW, SPECIAL #10-14 x ½ NUT 5 /-18 HEX FLG NYLOC NUT 3 /8- HEX FLG NUT #10-24 ACORN WASHER 3 / x ¾ x GA WASHER 3 / LOCK 27

28 ACCESSORIES MULCH KIT

29 ACCESSORIES ITEM PART NO. QTY. DESCRIPTION ITEM PART NO. QTY. DESCRIPTION COVER LATCH ASSY WELDNUT, PLATED WASHER WASHER LOCK SCREW 29

30

31

32 Rev A