EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No

Transcription

1 EC 70T Spare parts list Hydraulic breakers EC 70T s/n BES Construction Tools PC AB No

2 General information This spare parts list applies to the following: Part number Description EC 70T EC 70T Use only authorized parts. Any damage or malfunction caused by the use of unauthorized parts is not covered by Warranty or Product Liability. Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. Instructions for use This spare parts list contains no safety regulations and is merely intended to assist in the ordering of spare parts. For information about operating, servicing, or repairing, the relevant Safety and operating instructions must be consulted at all costs. Please observe the safety instructions listed in the relevant Safety and operating instructions!

3 Kits and consumables 1 Service, repair and wear part kits Seal kit 3 Label kit 5 Mechanical Breaker body 7 Impact mechanism 9 Tightening torques 11 Assembly instruction 13 Main dimensions, mm (in.) 14 Options/accessories Optional equipment 16 Hydraulic hose 19 Working tools 21

4 Kits and consumables 1

5 Item Part No. Name Qty L Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) Shock absorber, upper Retainer O-ring, 26 x 6 mm O-ring, 16.36x Shock absorber Wear bush Label kit Start-Up Kit Blunt Start-Up Kit Chisel (cross) Start-Up Kit Moil point Filling valve complete Seal kit 1 2

6 Service, repair and wear part kits Seal kit 3

7 Item Part No. Name Qty L Seal kit O-ring, 26 x 6 mm O-ring, 15.08x Seal, SRC 8 x 14 x 2.4 mm Threaded plug Seal Seal O-ring, ø72.39 x 5.33 mm, ø2.85 x 0.21 in One piece seal O-ring, ø x 5.33 mm, ø4.60 x 0.21 in Back-up ring, ø x 4.65 mm, ø4.65 x 0.18 in O-ring, ø x 5.33 mm, 90 shore (NBR) Seal, 70 x 85.1 x 6.3 mm, 2.76 x 3.35 x 0.25 in O-ring, x 5.33 mm O-ring, x 5.33 mm, 2.98 x 0.21 in Wiper, 70 x 80 x 6.3 x 9 mm, 2.76 x 3.15 x 0.25 x 0.35 in O-ring, 16.36x O-ring 1 4

8 Service, repair and wear part kits Label kit 5

9 Item Part No. Name Qty L Label kit Product label Product label AEM sign Safety label Safety label Sound power label, 114 db Label - Lubricating symbol 1 6

10 Mechanical Breaker body 7

11 Item Part No. Name Qty L Shock absorber, upper Spacer Shock absorber Lower guide Base plate, optional Nut Pair of lock washers Screw, optional, M20 x 80 mm Breaker box Cover Plug Plug 3 8

12 Mechanical Impact mechanism 9

13 Item Part No. Name Qty L Screw, M16 x 70 mm Back head Back-up ring, ø x 4.65 mm, ø4.65 x 0.18 in O-ring, ø x 5.33 mm, ø4.60 x 0.21 in Seal Seal O-ring, ø72.39 x 5.33 mm, ø2.85 x 0.21 in Plate spring Spacer Control valve Cylinder bush O-ring, ø x 5.33 mm, 90 shore (NBR) Seal, 70 x 85.1 x 6.3 mm, 2.76 x 3.35 x 0.25 in O-ring, x 5.33 mm Cylinder bush Wiper, 70 x 80 x 6.3 x 9 mm, 2.76 x 3.15 x 0.25 x 0.35 in Piston One piece seal Seal, SRC 8 x 14 x 2.4 mm O-ring, 15.08x Filling valve complete Threaded plug O-ring Fitting Cap Plug, M14 x 1.5 mm Housing Grease nipple, ISO 7-R 1/ O-ring, 16.36x Retainer O-ring, 26 x 6 mm Wear bush 1 10

14 Mechanical Tightening torques 11

15 Item Part No. Name Qty L 1 - Screw, 390 Nm Screw, 60 Nm/200 Nm, see "Assembly instruction" Filling valve, 130 Nm Threaded plug, 20 Nm Nipple, 90 Nm Plug, 30 Nm Grease nipple, 20 Nm - 12

16 Mechanical Assembly instruction 13

17 This page intentionally left blank 14

18 Mechanical Main dimensions, mm (in.) 15

19 This page intentionally left blank 16

20 Options/accessories Optional equipment 17

21 Item Part No. Name Qty L Chisel paste cartridge for grease gun, 12 x 400 g (0.88 lbs) Grease gun for 400 g cartridge Test gauge wear bush Maintenance and charging box with nitrogen cylinder, 2 l, 0.43 gal (0.53 US gal) Maintenance and charging box without nitrogen cylinder Base plate with through borings Bolt kit 1 18

22 Options/accessories Hydraulic hose 19

23 Item Part No. Name Qty L 1 - Standard connection hoses Hose, both ends 18 L(M26x1.5) length 1500 mm Hose, both ends 18 L(M26x1.5) length 1750 mm Hose, both ends 18 L(M26x1.5) length 2000 mm Hose, both ends 18 L(M26x1.5) length 2400 mm Heavy duty conncetion hoses with spring protection Hose, both ends 18 L(M26 x 1.5) length 1500 mm Hose, both ends 18 L(M26x1.5) length 1750 mm Hose, both ends 18 L(M26 x 1.5) length 2000 mm Hose, both ends 18 L(M26 x 1.5) length 2400 mm 2 20

24 Options/accessories Working tools 21

25 Item Part No. Name Qty L Moil point (conical) A Chisel (cross) B Asphalt cutter (cross) C Blunt tool D Comments for Page: Working tools A L=380 mm, Lt=665 mm, Wt=18 kg L=14.96 inch, Lt=26.18 inch, Wt=39.7 lb B W=70 mm, L=380 mm, Lt=665 mm, Wt=18.7 kg W=1.65 inch, L=10.43 inch, Lt=16.73 inch, Wt=9.3 lb C W=200 mm, L=435 mm, Lt=720 mm, Wt=22.7 kg W=7.87 inch, L=17.13 inch, Lt=28.35 inch, Wt=50 lb D L=380 mm, Lt=665 mm, Wt=17.6 kg L=14.96 inch, Lt=26.18 inch, Wt=38.8 lb 22

26

27

28 Any unauthorized use or copying of the contents or any part thereof is prohibited. This applies in particular to trademarks, model denominations, part numbers, and drawings. epiroc.com