26HP HYDRO DRIVE MID-MOUNT ZTR 355Z SERIES

Transcription

1 Parts Manual for 355Z SERIES MODEL 355ZB2654 ( ) Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Revision D, 6/9/2008

2

3 Table Of Contents PAGE GROUP 4 Wheel & Tire Group 6 Main Frame & Front Suspension 8 Seat Mount & Floor Group 10 Fuel Tank & Mount Group 12 Engine & PTO Group 14 Motion Control Group 18 Parking Brake Group 20 Pump Drive Group 22 Hydraulic Group 24 Transmission Service Parts 26 Rear Bumper Group 28 Decals - Safety & Operation (USA Models) 30 Decals - Brand & Safety 32 Decklift Group 36 54" Mower Deck - Pulleys, Belt & Idler Arm Group 38 54" Mower Deck - Housing, Cover & Spindles Group 42 54" Mower Deck - Rollers & Casters Group 44 Instrument & Control Panel Group 46 Electrical Group 48 Wiring Schematics 355Z SERIES 3

4 Wheel & Tire Group 4 355Z SERIES

5 Wheel & Tire Group Item Part No Qty Description Note WHEEL, CASTER, 11 X SILVER BEAD LO (INCLUDES REF NO. 2-6) X1 2 TIRE, Front, 11 X (SV) 3-2 WHEEL ASSEMBLY, Complete (SV) (INCLUDES REF NO. 4 & 5) VALVE STEM & CAP ASSEMBLY (SV) BEARING, Roller (2 PER TIRE) BEARING, Retainer (2 PER TIRE) CASTER AXLE DDSH X52 2 BOLT, 1/2-13 X 6-1/2 GD8 YZ NUT, 1/2-13 HEX NYLON LOCK WHEEL+TIRE ASMY REAR 20/ (INCLUDES REF NO. 4, 11 & 12) X1 2 TIRE, Rear 20 X 8.0 X 10 (SV) X2 2 WHEEL ASSEMBLY, For 20 X 8.0 X 10 Tire (SV) NUT, 1/2-20, FOR WHEEL BOLT SILVER WASHER, 1/2 SAE Footnotes: 355Z SERIES 5

6 Main Frame & Front Suspension 6 355Z SERIES

7 Main Frame & Front Suspension Item Part No Qty Description Note BUSHING, FLANGE D 1 WELD, PIVOTING FRONT END D 2 WELD,CASTER YOKE NUT, 5/16-18 HEX NYLON LOCK GREASE FITTING, 1/4-28 STRAIGHT COLLAR, 1" SPLIT D 1 WELD, MAINFRAME, SNAPPER ZT - RED SCREW, 5/16-18 X 1 FLAT HD SC PAD, FRICTION,.375 X 1.25 X NUT, 3/4-16 HEX NYLON LOCK WASHER, 3/4 SAE X56 1 BOLT, 3/4-16 X 7" YZ GD SPACER,.75 X 1.00 X PIVOT BEARING, 1.00" X 1.125" OD X 1.50" PIVOT BEARING, 1.00 X OD X SPACER,.76X 1.50 X CAP, VINYL X 1-1/2 Footnotes: 355Z SERIES 7

8 Seat Mount & Floor Group 8 355Z SERIES

9 Seat Mount & Floor Group Item Part No Qty Description Note D 1 PLATE, SEAT SUPPORT, CONS Z - RED X8 8 BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16 GD.9 FLAT NUT, 5/16-18 HEX NYLOCK FLANGE SPRING, SEAT SUPPORT WASHER, 3/8 SAE SAFETY WALK, FLOOR PLATE, X SAFETY WALK, FLOOR REST, X SEAT, XB-180, NO LOGO, BLACK NUT, 5/16-18 HEX NYLON LOCK NUT, 3/8-16 HEX NYLOCK FLANGE D 1 WELD, SEAT PLATE - RED D 1 PLATE, FLOOR, SNAPPER ZTR - RED D 1 PLATE, FLOOR, FRONT, CONS Z - RED MNT, VBRTN, 30 DURO MNT, VBRTN, RBBR BOLT, 3/8-16 X 5/8, SERRATED UNDER HEAD X28 2 BOLT, 3/8-16 X 3-1/2 GD5 YZ WASHER,.34 X 1.25 X 10 GA NUT, 3/8-16 HEX SERRATED FLANGE CLAMP, VINYL INSULATED X6 1 BOLT, 1/4-20 X 3/4 GD5 YZ WASHER, 1/4 SAE NUT, 1/4-20 HEX NYLOCK FLANGE ARM REST, SET OF TWO (SV) SPRING, SEAT ADJUSTMENT (SV) X1 1 KIT, SEAT RAILS. COMPLETE (SV) D 1 PLATE, SUPPORT, FRONT FLOOR - RED WASHER, 3/8" ID, INTERNAL TOOTH X6 1 BOLT, 5/16-18 X 3/4 GD WASHER, 5/16 SAE Footnotes: 355Z SERIES 9

10 Fuel Tank & Mount Group Z SERIES

11 Fuel Tank & Mount Group Item Part No Qty Description Note TANK, FUEL, LH (INCLUDES REF. NOS ) TANK, FUEL, RH D 2 PLATE, FUEL TANK BADGE X6 18 BOLT, 5/16-18 X 3/4 GD WASHER, 5/16 SAE WASHER, 5/16 LOCK YZ D 1 BRACKET, REAR SUPPORT - LH - RED D 1 BRACKET, REAR SUPPORT - RH FUEL CAP, 3.5", VENTED SCREW, #10-24 X 3/8 ALLEN BHBZ X4 2 SCREW, 1/4-20 X 1/2 ALLEN BH D 1 PLATE, SUPPORT, REAR TANK - SNP RED NUT, 5/16-18 HEX NYLOCK FLANGE X28 1 HOSE, 1/4 FUEL 28" LONG CLAMP, HOSE, EXTERNAL, 1/2 - RED FUEL GAUGE (SV) X1 1 GROMMET (SV) PICK UP TUBE ASSM, FUEL TANK (SV) Footnotes: 355Z SERIES 11

12 Engine & PTO Group Z SERIES

13 Engine & PTO Group Item Part No Qty Description Note 1-1 * ENGINE, 26HP ELS BRIGGS, Mod. 44P G CLUTCH, ELECTRIC, OGURA GT2.5, NZM (S/N: & BELOW) CLUTCH ANCHOR PAD WASHER,.34 X 1.25 X 10 GA BOLT, CRANKSHAFT, 7/16X2-3/4, PATCH YZ X8 5 BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16 SAE NUT, 5/16-18 HEX NYLOCK FLANGE X24 1 KEY, 1/4" SQ. X 3.00 (S/N: & BELOW) X18 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ (S/N: & BELOW) WASHER, 5/16" INT. TOOTH LOCK D 1 PLATE, HEAT SHIELD - RED HOSE, OIL DRAIN GASKET, EXHAUST SCREW-HEX SEMS LOCK WSHR 5/16-18X MUFFLER, B&S-ELS 22-26HP EXTENSION, TAILPIPE, 3" X8 2 SCREW BODY CLIP, 5/16-18 X 1/2 DEEP CLAMP, VINYL INSULATED X6 1 BOLT, 1/4-20 X 3/4 GD5 YZ NUT, 1/4-20 HEX NYLON FLANGE /16" PUSH-ON NUT RETAINER, STL, CZ CLUTCH, WARNER ELECTRIC, I (S/N: & ABOVE) X8 1 KEY, 1/4 SQ. X 1.00 (S/N: & ABOVE) X16 1 BOLT, 5/16-18 X 2 GD5 TFL (S/N: & ABOVE) NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) (S/N: & ABOVE) Footnotes: NOTE* Purchase engine parts from engine manufacturer dealer. 355Z SERIES 13

14 Motion Control Group Z SERIES

15 Motion Control Group Item Part No Qty Description Note GRIP, FOAM, 3/4 ID, 16 LONG X8 4 BOLT, 5/16-18 X 1 GD5 YZ WASHER, 5/16 SAE WASHER, 5/16 LOCK YZ SPACER,.39 X.63 X X20 8 BOLT, 5/16-18 X 2-1/2" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE X4 4 SCREW, #10-24 X 1/2 ROUND PHILLIPS NUT, #10-24 HEX X16 4 BOLT, 5/16-18 X 2 GD5 TFL BEARING, FLANGE BEARING, BRONZE FLANGE, 3/ MOUNT, CONTROL ARM BOLT, 3/8-16 X 1-1/4 SHCS NUT, 3/8-16 HEX NYLON LOCK X8 2 BOLT, 3/8-16 X 1 GD5 YZ X14 4 BOLT, 3/8-16 X 1-3/4 GD NUT, 3/8-16 HEX NYLOCK FLANGE NUT, 5/16-18 HEX SERRATED FLANGE (LARGE) X10 4 BOLT, 5/16-18 X 1-1/4 GD5 YZ D 2 WELD, PLATE, NEUTRAL - RED DAMPENER, CONTROL,#(P6709/P3610) D 1 WELD, CONTROL SHAFT, LH - RED D 1 WELD, CONTROL SHAFT, RH - RED BALL STUD, 5/16 X.50,# PC-477-2) D 2 PLATE, CONTROL LINK, TRANSAXLE - RED ROD, HYDRO LINKAGE - CONZ - YZ X6 2 BOLT, 7/16-14 X 3/4, GD 5 YZ NUT, 7/16-14 HEX TOP LOCK X6 2 BOLT, 1/4-20 X 3/4 GD5 YZ NUT, 1/4-20 HEX NYLOCK FLANGE NUT, 5/16-24 HEX, LH NUT, 5/16-24 JAM BALL JOINT, 5/16-24, LH FEMALE BALL JOINT, 5/16-24, FEMALE NUT, 5/16-18 HEX SERRATED FLANGE (SMALL) X12 2 BOLT, 5/16-18 X 1-1/2" GD5 TFL Footnotes: 355Z SERIES 15

16 Motion Control Group Z SERIES

17 Motion Control Group Item Part No Qty Description Note D 1 WELD, HANDLE MOTION CONTROL-LH D 1 WELD, HANDLE MOTION CONTROL-RH Footnotes: 355Z SERIES 17

18 Parking Brake Group Z SERIES

19 Parking Brake Group Item Part No Qty Description Note ROD, BRAKE CTRL, LOWER - CONZ SPRING, COMPRESSION COLLAR, 5/16" SET D 1 WELD, SHAFT, BRAKE HANDLE - RED D 1 WELD, BRAKE SHAFT - RED SPACER,.38 X.50 X X18 2 BOLT, 3/8-16 X 2-1/4 GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 1/2 SAE WASHER, 5/16 USS NUT, 5/16-24 HEX NYLON LOCK X6 4 BOLT, 1/4-20 X 3/4 GD5 YZ GRIP, BLACK FLEXIBLE BEARING, 1/2" FLANGED NUT, 1/4-20 HEX NYLOCK FLANGE ROD, PULLER ROD SPRING-EXTN 1.040ODX LG.105WIRE D CLEVIS, 5/16-24, STEEL X8 1 PIN, CLEVIS, 5/16 X 1 YZ PIN, HAIR,.0915 X 1-7/ X16 1 BOLT, 3/8-16 X 2 GD5 YZ NUT, 3/8-16 HEX SERRATED FLANGE Footnotes: 355Z SERIES 19

20 Pump Drive Group Z SERIES

21 Pump Drive Group Item Part No Qty Description Note PULLEY, CRANKSHAFT IDLER PULLEY SPACER, HYDRO PULLEY X24 1 BOLT, 3/8-16 X 3 GD5 YZ X16 1 BOLT, 3/8-16 X 2 GD5 YZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8 FENDER BELT, EL, HYDRO DRIVE D 1 WELD, IDLER, PUMP DRIVE - RED SPRING, EXTENSION, SWIVEL END PULLEY, IDLER, SINGLE FLANGE, 4" OD SPACER,.39 X 1.00 X SPACER,.39 X.75 X B 1 BUSHING, BRASS, 3/4 X 1 X SPACER, SHOULDER EYE BOLT, 3/8-16 X 4-1/4", 1" EYE NUT, 3/8-16 HEX WASHER, 3/8 GD.9 FLAT X28 1 BOLT, 3/8-16 X 3-1/2 GD5 YZ PULLEY, IDLER, FLAT, 2.75 DIA X.376 ID Footnotes: 355Z SERIES 21

22 Hydraulic Group Z SERIES

23 Hydraulic Group Item Part No Qty Description Note TRANSMISSION, RH HYDRO-GEAR TRANSMISSION, LH, HYDRO-GEAR CLAMP, HOSE,.75 FREE DIA ROD, DUMP VALVE, LH - CONZ ROD, DUMP VALVE, RH - CONZ X6 2 BOLT, 1/4-20 X 3/4 GD5 YZ WASHER, 1/4 SAE NUT, 1/4-20 HEX NYLOCK FLANGE X24 4 BOLT, 5/16-18 X 3" GD5 YZ X18 4 BOLT, 5/16-18 X 2-1/4" GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 5/16 SAE COLLAR, 5/16" SET RESERVOIR, HYDRO OIL, 350 ML X9 2 HOSE, 1/2" PUSH-ON Footnotes: 355Z SERIES 23

24 Transmission Service Parts Z SERIES

25 Transmission Service Parts Item Part No Qty Description Note X1 1 OIL FILTER X2 1 SEAL, LIP, 18 X 32 X X3 1 SEAL, LIP, 17 X 40 X X4 1 RING, RET 2.06 INT X5 1 BEARING, BALL, 1.0 X 52 X 15 OPEN 6205M X6 1 FAN, 7", 10 BLADE X7 1 PULLEY, 4.5 INCH X8 1 KIT SEAL X9 1 KIT, INPUT SHAFT Footnotes: 355Z SERIES 25

26 Rear Bumper Group Z SERIES

27 Rear Bumper Group Item Part No Qty Description Note D 1 WELD, BUMPER - CONS Z - SNP RED PLUG, PANEL, BLACK X8 6 BOLT, 3/8-16 X 1 GD5 YZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE Footnotes: 355Z SERIES 27

28 Decals - Safety & Operation (USA Models) Z SERIES

29 Decals - Safety & Operation (USA Models) Item Part No Qty Description Note DECAL, THROTTLE CONTROL DECAL, IGNITION SWITCH DECAL, MAIN, SNAPPER 355Z DECAL, HEIGHT OF CUT DECAL, DANGER, MOWER DECAL, DANGER, MOWER DISCHARGE,8.75X DECAL, 54" 8-1 DECAL, OPEI WALK/RIDE DECAL, TRANSAXLE RELEASE DECAL, BELT & BLADE SNAPPER DECAL, WARNING, HAND IN PULLEY DECAL, DANGER, FIRE DECAL, DANGER, FIRE (SP) DECAL, HYDRAULIC OIL, SAE 20W50 Footnotes: 355Z SERIES 29

30 Decals - Brand & Safety Z SERIES

31 Decals - Brand & Safety Item Part No Qty Description Note DECAL, SNAPPER, FRONT DECAL, LOGO, STRIPE - LH DECAL, LOGO, STRIPE - RH DECAL-TOUCH UP PAINT SNAPPER/MASSEY DECAL, 355Z 26HP MODEL Footnotes: 355Z SERIES 31

32 Decklift Group Z SERIES

33 Decklift Group Item Part No Qty Description Note NUT, 3/8-16 HEX NYLOCK FLANGE X8 4 BOLT, 3/8-16 X 1 GD5 YZ WASHER, 3/8 SAE D 1 WELD, HANDLE, DECK LIFT - RED X6 4 BOLT, 3/8-16 X 3/4 GD5 YZ D 1 WELD, SHAFT, REAR DECK LIFT - RED SPACER,.39 X.63 X SPACER,.39 X 1.00 X NUT, 1/2-20 HEX NYLON LOCK X20 2 BOLT, 1/2-20 X 2-1/2" GD5 YZ WASHER, 5/16 SAE WASHER, 5/16 LOCK YZ SPACER,.53 X 1.00 X SAFETY WALK, 4.50 X WASHER,.41 X 1.75 X X10 4 BOLT, 3/8-16 X 1-1/4 GD EYE BOLT, 3/8-16 X 5", 1 EYE D 1 WELD, DECK HANGER SUPPORT, 26/54 - RED X8 4 BOLT, 5/16-18 X 1 GD5 YZ SHAFT, HANDLE, DECK MOUNT D 1 WELD, DECK HANGER, LH D 1 WELD, DECK HANGER, RH SHAFT, HANGER SPRING, COMPRESSION D 2 WELD, QUICK RELEASE HANDLE - RED NUT, 1/2-20 HEX JAM SPACER,.39 X 1.00 X EYE BOLT, 3/8-16 X 6", 3" THRDS, WELDED ADJUSTER, BRAKE LINKAGE X14 2 BOLT, 3/8-16 X 1-3/4 GD NUT, 3/8-16 HEX NYLON LOCK PIN, HAIR,.0915 X 1-7/ BUSHING, DECK SUPPORT X12 2 PIN, CLEVIS, 1/2 X 1 1/2, YZP CLEVIS, 1/2-20, STEEL ROD, DECK LIFT LINKAGE BUSHING, REAR QUICK TACH Footnotes: 355Z SERIES 33

34 Decklift Group Z SERIES

35 Decklift Group Item Part No Qty Description Note D 2 WELD, QUICK RELEASE HANDLE, REAR - RED SPACER,.38 X.50 X.38, YZ D 1 LINK, DECK LIFT SHAFT SPRING, EXTENSION COVER, VINYL HANDLE X6 1 PIN, COTTER, 1/8" X 3/ WASHER, WAVE, M D 1 WELD, DECK LOCK GRIP, BLACK FLEXIBLE SPACER,.76 X 1.00 X NUT, 5/16-18 HEX NYLOCK FLANGE X6 4 BOLT, 5/16-18 X 3/4 GD BEARING, BRONZE FLANGE, 3/4" BEARING, BRONZE FLANGE, 3/ HITCH PIN ASSEMBLY, 1/2" X 2.50" X20 2 BOLT, 3/8-16 X 2-1/2 GD5 YZ D 1 PLATE, DECK HEIGHT- INNER -RED Footnotes: 355Z SERIES 35

36 54" Mower Deck - Pulleys, Belt & Idler Arm Group Z SERIES

37 54" Mower Deck - Pulleys, Belt & Idler Arm Group Item Part No Qty Description Note BELT KIT, A SECTION, EL ( ) SPACER,.39 X 1.50 X.75 - YZ D 1 MOUNT, IDLER TENSION RED D 1 WELD, DECK IDLER ARM, CON/SNP Z - RED D 1 BRACKET, SPRING ANCHOR - SNP/CON Z - RED SPRING, EXTENSION, PULLEY, FLAT IDLER, 5" W/KOYO BUSHING, 0.628IDX0.751ODX0.400LG PWDR MTL SPACER, 0.39 IDX0.625ODX1.15 LG CASE HARD SPACER, HYDRO PULLEY SPACER,.39 X 1.00 X PULLEY, IDLER SPACER,.39 X.75 X GREASE FITTING, 1/4-28 STRAIGHT X22 1 BOLT, 3/8-16 X 2-3/4" GD5 YZ X14 1 BOLT, 3/8-16 X 1-3/4 GD X36 1 BOLT, 3/8-16 X 4-1/2" GD5 YZ NUT, 3/8-16 HEX NYLOCK FLANGE WASHER, 3/8" USS WASHER, 3/8 SAE WELD, PULLEY, DECK DRIVE OB -PLAIN WELD, PULLEY, DECK DRIVE OB -PLAIN PULLEY ASM, DECK DRIVE Footnotes: 355Z SERIES 37

38 54" Mower Deck - Housing, Cover & Spindles Group Z SERIES

39 54" Mower Deck - Housing, Cover & Spindles Group Item Part No Qty Description Note A 1 BAFFLE, FRONT BLO-BLACK A 1 BAFFLE, DISCHARGE 10GA 54" MWR-BLACK NUT, 5/16-18 HEX NYLOCK FLANGE BOLT, RD HD SH SQ NK 5/16-18X0.750 G5 BLK X6 1 BOLT, 5/16-18 X 3/4 GD NUT, 5/16-18 HEX NYLON LOCK D 1 WELD, MOWER DECK, 54 - SNP RED KIT, 54" MOWER BLADES ( ; ) PLUG, BUTTON FOR 0.344SQ HOLE BLACK POLY DEFLECTOR, BLACK WASHER, 0.250(0.26IDX0.84ODX.12THK) BLK CLAMP, WIRE,.312DIA. (1).281 HOLE BLK WASHER, (0.34IDX0.75ODX.06THK) BLK SPRING, TORSION CHUTE 44/50" BLK CAP, VINYL LOCKWASHER, SPRING.250 BLK NUT, 1/4-20 HEX ROD, DEFLECTOR BOLT, RD HD SH SQ NK 1/4-20X0.875 G5 BLK D 1 PLATE, GUARD, MOWER DECK, 54", RH - RED D 1 PLATE, GUARD, BLOWER PULLEY - RED D 1 PLATE, GUARD, MOWER DECK, 54", LH - RED BODY CLIP, 5/16-18 X 1/2 DEEP X6 2 BOLT, 5/16-18 X 3/4 GD SCREW, HEX WSHR HD TAPTT 1/4-20X SCREW, HEX WSHR HD TAPTT5/16-18X0.750BLK SPINDLE ASSM, - STAMP STEEL LG SHAFT (Includes Ref. No ) BOLT, 5/16-18 X 1 1/4 FLANGE CAPSCREW, HEX HEAD 7/16-14x1-1/4 G8 YELLO (SV) (For Single Pulley) LOCKWSHER, SPRING.438 BLK (SV) WASHER, 0.438(0.45IDX1.25ODX.25THK) BLK (SV) SHIELD, BEARING,MOWER ARBOR UPPER HT TR (SV) A 3 HOUSING, ARBOR TOP - BLACK (SV) BEARING, BALL 0.750ID 1.780OD 0.610LG (SV) SHAFT, ARBOR 1.000DIA (SV) GASKET, FOAM POLY (SV) A 3 HOUSING & FITTING ASMY-LOWER BLACK (SV) Footnotes: 355Z SERIES 39

40 54" Mower Deck - Housing, Cover & Spindles Group Z SERIES

41 54" Mower Deck - Housing, Cover & Spindles Group Item Part No Qty Description Note FITTING, LUBE.250 DRIVE.25SH BL CHK YEL (SV) SHIELD, BEARING, MOWER ARBOR LOWER HT TR (SV) WASHER, SHIM, IDX1.388ODX0.30T (SV) ADAPTER, BLADE 3.375OD INT SPLINE PWD MTL (SV) RETAINING RING, EXT, # SELF LOCK (SV) WASHER, SPLINE (SV) WASHER, SPLN.6134IDX2.00OD.390TH SINTERPS (SV) SHAFT & BEARING ASSM. (SV) X18 1 BOLT, HEX, 7/16-14X2-1/4, GD 5, YZ (For Double Pulley) Footnotes: 355Z SERIES 41

42 54" Mower Deck - Rollers & Casters Group Z SERIES

43 54" Mower Deck - Rollers & Casters Group Item Part No Qty Description Note D 1 BRACKET, GAUGE WHEEL, RH - RED D 1 BRACKET, GAUGE WHEEL, LH - RED WHEEL WIDE 3.92 DIA 0.531ID POLY BOLT - WHEEL 3/8-16X THRD YELLOW WASHER, 0500(0.51IDX0.87ODX.06THK) BLK NUT, 3/8-16 HEX NYLOCK FLANGE X8 4 BOLT, 5/16-18 X 1 GD5 YZ NUT, 5/16-18 HEX NYLOCK FLANGE WASHER, 5/16 SAE Footnotes: 355Z SERIES 43

44 Instrument & Control Panel Group Z SERIES

45 Instrument & Control Panel Group Item Part No Qty Description Note CABLE, THROTTLE CONTROL, 36" NUT, 1/4-20 HEX NYLON LOCK X6 2 BOLT, 1/4-20 X 3/4 GD5 YZ PLUG,.820X1.44 HOLE, BLACK PLASTIC O-RING, 7/8 ID X 1/16 W RING, SWITCH RETAINER NUT, 3/8-24 HEX SCREW, #10-24 X 1" RS, CZ NUT, #10-24 HEX NYLON LOCK A 1 PLATE, CONTROL PANEL - BLACK SWITCH, IGNITION, 6 POST HOUR METER, W/ SUPRESSOR SWITCH, BLADE ENGAGEMENT KNOB-SLOTTED THROTTLE CABLE, CHOKE CONTROL, 51 (Z) KEY, IGNITION, MOLDED SET (SV) (SET OF TWO COVER (SV) PLASTIC NUT (SV) Footnotes: 355Z SERIES 45

46 Electrical Group Z SERIES

47 Electrical Group Item Part No Qty Description Note SWITCH, IGNITION (Includes Ref No. 2-4) KEY, IGNITION MOLDED (SV) (Set of 2) COVER (SV) PLASTIC NUT (SV) HOUR METER W/SUPRESSOR (Includes Retaining Ring) SWITCH, PTO WIRE HARNESS, MAIN, CONSUMER Z BATTERY CABLE, POSITIVE, SWITCH, SEAT, GRAY, NC (BOLT IN) SWITCH, SEAT, GRAY, NC (TWIST IN) BOLT, HEX WASHER HEAD PLASTITE, 1/4 X 1/ CABLE TIE-PUSH MOUNT CIRCUIT BREAKER, 20A WASHER, 1/4 SAE NUT, 5/16-24 JAM WASHER, 5/16 LIGHT LOCK SOLENOID-4 POLE 12 VOLT DC (TROMBETTA) X6 4 BOLT, 1/4-20 X 3/4 GD5 YZ NUT, 1/4-20 HEX SERR. FLANGE GROMMET, 7/ BATTERY CABLE, NEGATIVE, 14" 21-1 BATTERY, WET ( BCIU1, 340 CCA) BATTERY CABLE, POSITIVE, STRAP, BLACK RUBB SWITCH, PLUNGER, N.O./N.C CLAMP, VINYL X8 1 BOLT, 3/8-16 X 1 GD5 YZ WASHER, 3/8 SAE NUT, 3/8-16 HEX NYLOCK FLANGE Footnotes: 355Z SERIES 47

48 Wiring Schematics Z SERIES

49 Wiring Schematics Item Part No Qty Description Note 1-1 WIRING SCHEMATIC INCLUDES HARNESS # (S/N: & ABOVE) 2-1 WIRING SCHEMATIC INCLUDES HARNESS # (S/N: & BELOW) Footnotes: 355Z SERIES 49

50

51

52 Parts Manual for 355Z SERIES IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED Briggs & Stratton Yard Power Products Group 535 Macon Road McDonough, GA, U.S.A Copyright 2008 Briggs & Stratton Corporation Milwaukee, WI USA. All Rights Reserved Revision D, 6/9/2008