PARTS MANUAL (ANSI/CSA, CE, AS & KC) DC ELECTRIC SCISSORS MODELS SJIII 4740
|
|
- Ralph Fowler
- 5 years ago
- Views:
Transcription
1 PARTS MANUAL (ANSI/CSA, CE, AS & KC) DC ELECTRIC SCISSORS MODELS AA June 206
2 This manual is based on Serial Numbers: & Above Please refer to the website - for older Serial Numbers. Service Center 35 Swenson Ave. St. Charles, Illinois, 607 USA Phone: Toll Free: Fax: service@skyjack.com Parts (North America) Toll Free: Toll Free Fax: parts@skyjack.com Australia Pty Ltd. Coates Place Wetherill Park New South Wales 26 Australia Tel: +6 (0) Fax: +6(0) Parts & Service (Europe) Unit Maes Y Clawdd Maesbury Road Industrial Estate Oswestry, Shropshire SY0 8NN UK Phone: Fax: info@skyjackeurope.co.uk Brasil Alameda Júpiter, 70 Loteamento American Park Empresarial Indaiatuba, SP, Brasil Tel:
3 DC Electric Scissor Lifts Parts Manual General The information contained in this section is designed to aid the user in locating and identifying replacement parts. Component parts of various assemblies and sub-assemblies comprising the work platform are illustrated and accompanied by a descriptive parts list. Exploded drawings are used to show relative location of component parts in disassembly order. If a part cannot be found in this section, order by work platform model number and serial number, giving a complete description of the part. Parts Ordering Information When ordering replacement parts, the complete part number and description should be used to ensure proper identification and delivery of the desired item. This complete identification should also be used when requesting equipment information. Method of Listing Parts are listed in order according to the reference number shown in the illustration, followed by a full description based upon the NOUN FIRST method. That is, the noun name of the part is listed first, then the modifying description information which serves to specifically identify the item. For example: PIN, Clevis. Assemblies or groups are shown at the beginning of a parts list and are identified with the letter references A, B, C, etc. Individual parts in these lists have corresponding letters after their description to identify which assembly or group it is used in. Individual parts without identifying letters are used in all the assemblies or group shown at the beginning of the parts list. s preceded with an ( ) indicates a serviceable component or attaching hardware for the higher level assembly. If an index number initially starts with the letter K, for example K, means it s a kit. Any item(s) included in a kit will not have an index number. Quantities (Units Per Assy.) The quantities of each part that are required to complete the assembly. If quantity is (AR), it is understood that the quantity may vary when aerial platform is equipped with certain options. Order quantity as needed. Hardware Standard screws, washers, nuts, etc. are not identified by a reference number. These parts are known as COMMON HARDWARE items and appear indented under the major items with which they are used. They should be ordered separately as listed, since they are not component parts of the pieces they attach to. How to Order Repair Parts. Address all orders to your local SKYJACK dealer. 2. Specify model and serial number of the work platform (found on the serial number plate). 3. List the quantity needed.. List the length needed (if bulk item). 5. List the part number and description as shown in this manual for each item. 6. Show billing and shipping address and name of individual if possible. 7. Suggest best routing. CUSTOMER DEALER MODEL NUMBER SERIAL NUMBER DATE PURCHASED Use Only Authorized Replacement Parts! Page 3
4 Table of Contents.0 Platform Related Parts. Platform Group Main Platform and Extension Assembly Main Platform Assembly Extension Platform Assembly....5 Main Railings Assembly Extension Railing Assembly Full Gate Entrance Assembly Half Gate Entrance Assembly (ANSI/CSA, CE & KC) Quick Release Pin Assembly Gate Latch Assembly Extension Handrail Assembly Platform Control Box Assembly Control Console Assembly Enable Controller Assembly Platform A/C Outlet Assembly Scissor Related Parts 2. Scissor Group Scissor Mounting Hardware Assembly Scissor Connecting Hardware Assembly Lift Cylinder Assembly and Mounting Hardware Holding Valve Manifold Assembly Hydraulic Hose Connections - Scissors Scissors Limit Switch Assembly Horn Assembly Load Sensing and Transducer Module Assembly (CE & AS) Pressure Switch Assembly (KC Only) Flashing Light Assembly Base Related Parts 3. Base Assembly Base Assembly (Continued) Front Hub Assembly Steer Cylinder Assembly Rear Brake Assembly Drive Manifold Assembly Brake Release Manifold Assembly Hydraulic Hose Connections - Base Pothole Protection Assembly Wheel Assembly Tilt Switch and Bracket Assembly (ANSI/CSA & KC) Base Control Assembly Counter Reset (CE)... 7 Page
5 Table of Contents.0 Hydraulic Tray Related Parts. Hydraulic Tray Group Hydraulic Tray Group (Continued) Hydraulic Tank Lid Assembly Emergency Lowering Assembly Motor and Pump Assembly Main Manifold Assembly Hydraulic Hose Connections - Hydraulic Tray Battery Tray Related Parts 5. Battery Tray Assembly Battery Assembly Charger Assembly Electrical Related Parts 6. Electrical Panel Assembly Control Cable Assembly Rear Manifold Harness Main Manifold Harness Electrical Harnesses (Continued) Battery Cables Dual Flashing Light Harness (ANSI/CSA only) RST Wire Assembly Optional Equipment 7. Board Carrier Assembly (ANSI/CSA, CE & AS) Inverter Subgroup (ANSI/CSA) Inverter Wiring (ANSI/CSA) Inverter Assembly and Labels (ANSI/CSA) Dual Flashing Light Assembly (ANSI/CSA) Telematics Option - Morey (ANSI/CSA) Telematics Option - ZTR (ANSI/CSA) Telematics Harness (ANSI/CSA) Heavy Duty Pipe Rack Assembly (ANSI/CSA, CE & AS) Residual Current Device Assembly (CE) Aluminum Control Box Guard Assembly (CE) Labels 8. Label Kit Labels - Platform Control Console Labels - Miscellaneous Labels - Left & Right Side Labels - Front, Rear and Top Tables 9. Fluid Table Page 5
6 Notes Page 6
7 .0 PLATFORM RELATED PARTS Gate Latch.0 Half Gate (ANSI/CSA, CE & KC).8 Enable Controller. Full Gate.7 Control Console.3 Main Railing.5 Platform Control Box.2 Extension Handrail Extension Railing..6.9 Quick Release Pin Platform A/C Outlet.5 Extension Platform. Main Platform.3 Page 7
8 . Platform Group 2 3 M69075AE Page 8
9 . Platform Group Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A PLATFORM ASSEMBLY, Full Gate B PLATFORM ASSEMBLY, Half Gate (ANSI/CSA & KC) (Ref.) ASSEMBLY, Main Platform and Extension (For components, refer to Section.2) 2 (Ref.) ASSEMBLY, Railings - Main (For components, refer to Section.5) 3 (Ref.) ASSEMBLY, Railings - Extension (For components, refer to Section.6) (Ref.) ASSEMBLY, Gate Entrance (For components, refer to Section.7), A (For components, refer to Section.8), B Page 9
10 .2 Main Platform and Extension Assembly 2 3 M79AD Page 0
11 .2 Main Platform and Extension Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Main Platform and Extension (Ref.) ASSEMBLY, Platform (For components, refer to Section.3) 2 (Ref.) ASSEMBLY, Extension Deck (For components, refer to Section.) BUMPER, Scissor 0606 NUT, Hex Nylon Lock (3/8-6, Gr. 5) Page
12 .3 Main Platform Assembly M69086AE Page 2
13 .3 Main Platform Assembly Part ASSEMBLY, Platform NOTE: Part Numbers followed by a DG indicate dark grey painted parts WELDMENT, Platform ASSEMBLY, Pin - Rollout ROLLER, Wide 2533 SLIDER, Bushing PIN, Cotter (/ x -/2 ) SLIDER, Roll out SCREW, Rambo - ST3.5 X 3 Page 3
14 . Extension Platform Assembly M69087AD Page
15 . Extension Platform Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Extension Deck WELDMENT, Extension Platform PIN, Roll Out ROLLER, Narrow SLIDER, Bushing STOP, Extension Deck NUT, Hex Nylon Lock (5/6-8, Gr B) BOLT, Button head (5/6-8 x 3/ ) Page 5
16 .5 Main Railings Assembly Places 7 Places Page 6 Places M69097AE
17 .5 Main Railings Assembly Part ASSEMBLY, Railings - Main NOTE: Part Numbers followed by a DG indicate dark grey painted parts RAILING, Main Side Lower LH RAILING, Main Side Lower RH RAILING, Main Side Upper LH RAILING, Main Side Upper RH PLATE, Kick GUARD, Cable PLUG, Plastic - Tube (-/ x -/ ) SPACER, Railing Retainer 9 (Ref.) 7 ASSEMBLY, Pin - Quick Release Large Loop (For components, refer to Section.9) PLATE, Cable Guard Cover - Right Hand 2595 PLATE, Cable Guard Cover - Left Hand RIVET, Pop (/ Diameter x 5/8 ) CLAMP, Single Clip (G8) BOLT, Self Tapping (/ - x 3/ ) NUT, Hex Nylon Lock (5/6-8, Gr B) BOLT, Carriage (5/6-8 x 2 ) WASHER, Flat (/ ) (If equipped) RIVET, Pop (3/6 Diameter x 9/6 ) 9 (Ref.) 2 ASSEMBLY, Pin - Quick Release Small Loop (For components, refer to Section.9) Page 7
18 .6 Extension Railing Assembly Places M9773AC Page 8
19 .6 Extension Railing Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Railings - Extension WELDMENT, Railing - Extension Deck Lower WELDMENT, Railing - Extension Deck Upper 3 (Ref.) 2 ASSEMBLY, Hand Rail - Extension Deck (For components, refer to Section.) TUBE, Round - Extensiond Deck Midrail BOX, Manual NUT, K-Lock (#0-32) WASHER, Flat (#0) SCREW, Round head machine (#0-32 x /2 ) PLATE, Mount - Info/Warning/Manual box 0 (Ref.) 2 ASSEMBLY, Pin - Quick Release Large Loop (For components, refer to Section.9) PLATE, Retainer - Extension Deck Railing PLUG, Plastic tube (-/ x -/ ) BOLT, Hex head (5/6-8 x -3/ ) BOLT, Self tapping (/ - x 3/ ) NUT, Hex Nylon Lock (5/6-8, Gr B) BOLT, Hex Head (3/8-6 x 5/8 ) NUT, Hex Head Jam (3/8-6) Page 9
20 .7 Full Gate Entrance Assembly Places M999AD Page 20
21 .7 Full Gate Entrance Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 9767 ASSEMBLY, Railing - Entrance Left Hand B 9768 ASSEMBLY, Railing - Entrance Right Hand C ASSEMBLY, Full Gate - Hinged WELDMENT, Railing - End Ent. Lower Left Hand, A WELDMENT, Railing - End Ent. Lower Right Hand, B WELDMENT, Railing - End Ent. Upper Left Hand, A 288 WELDMENT, Railing - End Ent. Upper Right Hand, B PLATE, Kick - End Entrance, A, B 6 (Ref.) ASSEMBLY, Pin - Quick Release Large Loop (For components, refer to Section.9) BOLT, Carriage (5/6-8 x 2 ), A, B NUT, Hex Nylon Lock (5/6-8, Gr B), A, B PLUG, Plastic Tube (-/ x -/ ) BOLT, Self Tapping (/ - x /2 ), A, B WELDMENT, Gate - Lower, C WELDMENT, Gate - Upper, C 3 (Ref.) ASSEMBLY, Door Spring Latch, C (For components, refer to Section.0) 3676 HINGE, Steel (3.5"), C BUMPER, Door, C PLATE, Latch - Gate Stop, C SCREW, Self tapping (/ - x 3/ ), C CLAMP, Aluminum - Door Sweep, C STRIP, Rubber - Door Sweep, C RIVET, Wide Hd (/8" x 0.390"), C HINGE, Spring, C Page 2
22 .8 Half Gate Entrance Assembly (ANSI/CSA, CE & KC) M7989AC Page 22
23 .8 Half Gate Entrance Assembly (ANSI/CSA, CE & KC) Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Entrance - Half Gate (ANSI/CSA, CE & KC) ASSEMBLY, Railing - End Entrance WELDMENT, Railing - Upper WELDMENT, Railing - Left Hand WELDMENT, Railing - Right Hand 083 PAD, Entry Railing PLATE, Kick - End Entrance BOLT, Self tapping (/ - x ) 7 (Ref.) 2 ASSEMBLY, Pin - Quick Release Large Loop (For components, refer to Section.9) BOLT, Carriage (5/6-8 x 2 ) NUT, Hex Nylon Lock (5/6-8, Gr B) ASSEMBLY, Half Gate - Hinged WELDMENT, Gate - Half (Ref.) ASSEMBLY, Gate Latch (For components, refer to Section.0) HINGE, Spring PLUG, Tube 990 STRIP, Rubber - Door Sweep CLAMP, Aluminum - Door Sweep BUMPER, Door SCREW, Self tapping (/ - x 3/ ) PLATE, Latch - Gate Stop RIVET, Wide Head Page 23
24 .9 Quick Release Pin Assembly M068AA_2 Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Quick Release Pin - Large Loop PIN, Quick release (3/8 diameter x 2 ) LANYARD, Plastic coated (6 ) BOLT, Hex head (3/8-6 x 2-/2, Gr 5) WASHER, Flat (3/8 ) 0606 NUT, Hex Nylon Lock (3/8-6, Gr. 5) ASSEMBLY, Quick Release Pin - Small Loop PIN, Quick release (3/8 diameter x 2 ) LANYARD, Plastic coated (6 ) BOLT, Self tapping (#8-8 x /2 ) Page 2
25 .0 Gate Latch Assembly M060AA Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Latch - Gate PIN, Latch GUIDE, Nylon spring PLATE, Gate latch release PIN, Roll (/8 x ) SPRING, Compression Page 25
26 . Extension Handrail Assembly M62535AA Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Handrail - Extension Deck (Hinged) 9775 HANDRAIL, Extension - Deck PLUG, Slider BOLT, Hex head (5/6-8 x 2 ) 0398 NUT, Hex Nylon Lock (5/6-8, Gr B) 5 (Ref.) 3 ASSEMBLY, Pin - Quick Release Small Loop (For components, refer to Section.9) BOLT, Self tapping (/ - x 3/ ) Page 26
27 Notes Page 27
28 .2 Platform Control Box Assembly 7.25" " 2 Places M6387AD5 Page 28
29 .2 Platform Control Box Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A ASSEMBLY, Control Box (ANSI/CSA, CE, & KC) B ASSEMBLY, Control Box (AS) C ASSEMBLY, Control Box (Long Cable Option) (Ref.) - ASSEMBLY, Control Console (For components, refer to Section.3) PLATE, Outside - Control Box, A, C PLATE, Outside - Control Box, B TUBE, Control Box, A, C PLATE, Guard - Control Box, B RIVET, Pop (3/6 x.0 ), A, C RIVET, Pop (3/6 x /2-3/8 ), B SCREW, Hex Hd (#8-8 x /2 ) WASHER, Lock (5/6 ), A, C WASHER, Lock (8-32 ), B NUT, Hex head (#8-32) SCREW, Round Hd (#8-32 x /2-3/8 ) PLUG (7/8" hole) 0 (Ref.) - CONTROL CABLE, 6 Pin - Platform Control Box (For components, refer to Section 6.2) STRAIN RELIEF HOUSING, Male connector (9 pin) (to controller harness) EDGE MOLDING, Control Box, B CLAMP, Control Cable Railing, C 5 (Ref.) ASSEMBLY, Pin - Quick Release Large Loop, C (For components, refer to Section.9) BOLT, Hex Hd (3/8-6 x 2 ), C NUT, Hex Nylon Lock (3/8-6, Gr. 5), C WASHER, Flat (3/8 ), C Page 29
30 .3 Control Console Assembly L M6368AA Page 30
31 .3 Control Console Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Control Console PLATE, Control Console 2 (Ref.) - ASSEMBLY, Enable Controller (For components, refer to Section.) SWITCH ASSEMBLY, Emergency Stop 705 HEAD, Emergency stop switch 7056 LATCH BLOCK, N.C. contact 706 LED BLOCK, 2V (red) 68 SWITCH ASSEMBLY, Horn 7058 HEAD, Pushbutton 7056 LATCH 705 BLOCK, N.O. contact SWITCH, Toggle - (Lift/Off/Drive) SWITCH, Torque GUARD, Toggle switch SEAL, Panel bushing INDICATOR, Battery charge L (Ref) - LABELS (For components, refer to Section 8.) Page 3
32 . Enable Controller Assembly M520AD Page 32
33 . Enable Controller Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Enable Controller ASSEMBLY, Handle HANDLE, Front Half SCREW, Controller Handle SCREW, Plastite (#-20 x 5/6 ) HOLDER, Micro Switch ASSEMBLY, Rocker Micro - Left/Right Steer 7 3 AXLE, Rocker ROCKER BOOT, Rocker WASHER BOOT, Plunger Switch SPRING SWITCH, Plunger SWITCH, Micro Lever - Enable SCREW, Plastite (#2-28 x /2 ) INSULATOR, Micro COUPLING (8mm) SCREW, Set SCREW (#6-32 x 5/8 ) HANDLE, Back Half NUT, Controller Lever LEVER, Trigger BOOT & GASKET WASHER E-CLIP SCREW WASHER SCREW MICROINSULATOR SWITCH, Micro - Neutral Page 33
34 .5 Platform A/C Outlet Assembly 3 L M9538AB Page 3
35 .5 Platform A/C Outlet Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A ASSEMBLY, Platform A/C Outlet (ANSI) B ASSEMBLY, Platform A/C Outlet (Cable Only) (CE, AS & KC) CABTIRE, /3, A CABTIRE, /3, B ASSEMBLY, Wire - Ground INLET, Connector - 0V 3227 SEAL, Tite Cover - 0V PLATE, Receptacle BOX, Outlet - 0V GFCI, Receptacle BOLT, Hex Hd (/ -20 x ) WASHER, Flat (/ ) WASHER, Lock (/ ) NUT, Hex Hd (/ -20) RIVET, Pop (5/32 x ) RIVET, Pop (/ x 0.70 ) 5663 PLATE, Cover - Ontario Hydro 0 (Without Gate) PLATE, Cover - Ontario Hydro 0 (With Gate) L (Ref) - LABELS (For components, refer to Section 8.) Page 35
36 Notes Page 36
37 2.0 SCISSOR RELATED PARTS 2.2 Scissors - Mounting Hardware 2.3 Scissors - Connecting Hardware 2 2. Scissors 2.7 Limit Switch Lift Cylinders 2. Pressure Switch (KC) Holding Valve Manifold Flashing Light Assembly 2.8 Horn 2.6 Hydraulic Hose Connections - Scissors 2.9 Load Sensing and Transducer Module (CE & AS) Page 37
38 2. Scissor Group Page M705AB
39 2. Scissor Group Part ASSEMBLY, Scissors NOTE: Part Numbers followed by a DG indicate dark grey painted parts WELDMENT, Scissor - Inside (Level ) WELDMENT, Scissor - Inside (Level 2) WELDMENT, Scissor - Inside (Level 3) 208 WELDMENT, Scissor - Inside (Level ) WELDMENT, Scissor - Inside (Level 5) WELDMENT, Scissor - Inside (Level 6) WELDMENT, Scissor - Outside (Level ) WELDMENT, Scissor - Outside (Level 2) WELDMENT, Scissor - Outside (Level 3) WELDMENT, Scissor - Outside (Level,5 & 6) 3080 BUMPER, Scissor - Bottom BOLT, Hex Head (M2-.25 x 6mm) WASHER, Flat (M2) BUMPER, Scissor - Upper SCREW, Machine (3/8-6 x 5/8 ) CLAMP, Single (G0) CLAMP, Double (G0) BOLT, Hex Hd (3/8-6 x 7/8 ) WASHER, Flat (3/8 ) WASHER, Flat (7/8 ) ASSEMBLY, Stand - Upper Maintenance Support WELDMENT, Stand - Upper Maintenance Bar BOLT, Hex Hd (5/6-8 x 2-3/ ) NUT, Hex Nylon Lock (5/6-8, Gr B) ASSEMBLY, Stand - Lower Maintenance Support WELDMENT, Stand - Lower Maintenance Bar BOLT, Hex Hd (5/6-8 x 2-3/ ) NUT, Hex Nylon Lock (5/6-8, Gr B) 23 (Ref) - ASSEMBLY, Scissor Mounting Hardware (For components, refer to Section 2.2) 2 (Ref) - ASSEMBLY, Scissor Connecting and Limit Switch Pins Hardware (For components, refer to Section 2.3) 25 (Ref) 2 ASSEMBLY, Lift Cylinder and Mounting Hardware (For components, refer to Section 2.) 26 (Ref) 2 ASSEMBLY, Manifold - Holding Valve (For components, refer to Section 2.5) 27 (Ref) HOSE CONNECTIONS, Scissors (For components, refer to Section 2.6) Page 39
40 2.2 Scissor Mounting Hardware Assembly Platform Slider Assembly 2 Places Platform Mounting Bracket Assembly 2 Places Base Slider Assembly 2 Places Base Mounting Assembly 2 Places M705AB_MountHardware Page 0
41 2.2 Scissor Mounting Hardware Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts PIN, Inside Scissors (3/ dia. x ) PIN, Cotter (/ x -/2 ) BEARING, Plain (3/ I.D. x 7/8" O.D. x -/2 ) 2570 CASTING, Bracket - Platform Mount SHIM, Platform Mount (0.035 ) PIN, Roller - Bottom ROLLER, Scissor SPACER, Pin - Bottom Roller PIN, Upper Slider CASTING, Slider - Platform PAD, Slider SPACER, Slider BOLT, Hex Hd (/ -20 x 5/8 ) WASHER, Flat (/ ) WASHER, Lock (/ ) Page
42 2.3 Scissor Connecting Hardware Assembly End Pin Assembly - Small Pin Places End Pin Assembly - Big Pin 0 Places Center Pin Assembly 2 Places Limit Switch Pin Assemby Place M705AB_ConnectHardware Page 2
43 2.3 Scissor Connecting Hardware Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts PIN, Inside Scissors (3/ DIA x ) PIN, Inside Scissors (" DIA x -9/6") BEARING, Plain (3/ I.D. x.5 ) PIN, Cotter (/ x -/2 ) 233 BEARING, Plain (-/ I.D. x.0" O.D. x -3/6 ) PIN, Center Scissor PIN, Cotter (5/6 DIA x 2 ) WASHER, Thrust (/6 ) WASHER, Flat (/8 ) WASHER, Flat - Nylon (/8 ) BOLT, Hex Hd (3/8-6 x 7/8 ) 0372 WASHER, Flat (3/8 ) PIN, Limit Switch - Scissors BEARING, Plain ( I.D. x -/8" O.D. x -/2") Page 3
44 2. Lift Cylinder Assembly and Mounting Hardware M9758AA_ Page
45 2. Lift Cylinder Assembly and Mounting Hardware Part A 9758 ASSEMBLY, Cylinder - Upper B 9756 ASSEMBLY, Cylinder - Lower NOTE: Part Numbers followed by a DG indicate dark grey painted parts Cylinder, Lift -.0 x GLAND WELDMENT, Rod WELDMENT, Tube SPACER ROD EYE BOLT, Hex (3/"-6 x 3") PISTON 9 (Ref.) - ASSEMBLY, Manifold - Holding Valve (For components, refer to Section 2.5) WELDMENT, Pin 0550 ORIFICE, One Way (3/32 dia) SEAL, O-Ring FITTING, 90D Elbow (06 JICM - 0 ORBM), A FITTING, Tee (06 JICM - 06 JICM - 06 ORBM), B BOLT, Hex head (5/6-8 x 2 ) BOLT, Hex Hd (3/8-6 x ) WASHER, Flat (5/6 ) WASHER, Lock (5/6 ) WASHER, Flat (3/8 ) 9 83 BUSHING, Fiberglide (-/2 dia x -/ ) K 9920 KIT, Seal (Not Shown) Page 5
46 2.5 Holding Valve Manifold Assembly Lower Cylinder Manifold 3 2 M95256AC Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Manifold - Holding 30 ASSEMBLY, Manifold - Transducer Auxilary Lowering 3037 MANIFOLD, Transducer Auxilary Lowering PLUG, Expander VALVE, Relief VALVE, Poppet - Solenoid Cartridge 2250 FITTING, Plug (0 ORB Hex) (ANSI/CSA & KC only) COIL (20 VDC) 6 33 ASSEMBLY, Pressure Transducer (CE & AS only) TRANSDUCER, Pressure PSI SET SCREW, Cup (#8-32 x /8") LABEL, Mylar Cable Page 6
47 2.6 Hydraulic Hose Connections - Scissors 2 M78AB Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts HOSE CONNECTIONS, Scissors H HOSE, Hydraulic (Main Manifold to Lower Cylinder Tee) 2 H HOSE, Hydraulic (Lower Cylinder Tee to Upper Cylinder) Page 7
48 2.7 Scissors Limit Switch Assembly M95393AB, M30559AD Page 8
49 2.7 Scissors Limit Switch Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Limit Switch - Scissors SUB-ASSEMBLY, Limit Switch - Scissors LIMIT SWITCH, Scissors LIMIT SWITCH, Sealed CONNECTOR, Receptacle - 8 Pin CONNECTOR, Receptacle - 8 Pin Wedge CONNECTOR, Contact Pin LABEL, LSA LABEL, LSB LABEL, LS BRACKET, Limit Switch GUARD, Limit Switch WASHER, Lock (/ ) BOLT, Hex Hd (/ -20 x -3/ ) NUT, Hex Hd (/ -20, Gr 8) WASHER, Flat (/ ) BOLT, Hex Hd (/ -20 x -/ ) BUSHING, Snap-In (3/ I.D) CLAMP, Gear #0 (2-/2 ) CAM, Limit Switch WASHER, Flat (#0) NUT, Lock (#0-32) SCREW, Round Hd (0-32 x 5/8 ) CLAMP, Single Page 9
50 2.8 Horn Assembly 2 3 M668AA_2 Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Horn 569 NUT, Hex (/ -20) BOLT, Hex Hd (/ -20 x ) WASHER, Flat (/ ) 669 HORN, 2V - Low Tone Page 50
51 2.9 Load Sensing and Transducer Module Assembly (CE & AS) M972AB Part NOTE : Part Numbers followed by a DG indicate dark grey painted parts. A 9958 ASSEMBLY, Load Sensing (CE) B 972 ASSEMBLY, Load Sensing (AS) 300 TRANSDUCER, Angle BEEPER, SP MODULE, Overload Sensing Controller, A MODULE, Overload Sensing Controller, B 3068 BRACKET, Control Module SCREW, Round Hd (#0-32 x -/") SCREW, Round Hd (#0-32 x ") SCREW, Round Hd (#6-32 x 5/8") WASHER, Flat (#0) WASHER, Flat (#6) WASHER, Flat (/") WASHER, Lock (#0) WASHER, Lock (#6) WASHER, Lock (/") NUT, Hex (#0-32) NUT, Hex (#6-32) BOLT, Hex Hd (/"-20 x 5/8") Page 5
52 2.0 Pressure Switch Assembly (KC Only) 2 M97698AA Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Pressure Switch (KC only) SWITCH, Pressure (0ORSM) FITTING, Straight (0ORBM-0ORSF) Page 52
53 2. Flashing Light Assembly M738AA_ Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 738 ASSEMBLY, Flashing Light (ANSI/CSA & KC) B 322 ASSEMBLY, Flashing Light (CE & AS) 26 LIGHT, Beacon - With Terminals, A 277 LIGHT, Beacon - 2V, B 653 BULB, Dual Contact - 2V WASHER, Lock (/2") NUT, Hex Hd (/2"-20) 0373 FLASHER, 2-2 Volt, A CLAMP, Plastic (-/ ), A BOLT, Machined (#0-32 x /2 ), A NUT, Machined (#0-32), A INSTRUCTIONS, Flashing Light Page 53
54 Notes Page 5
55 3.0 BASE RELATED PARTS Drive Manifold 3.5 Brake Release Manifold 3.6 Counter Reset (CE) Tilt Switch and Bracket (ANSI/CSA & KC) Base Control Base Group 3. 3 Wheels Rear Brakes Pothole Protection Device 3.2 Front Hub 3.3 Steer Cylinder 3.7 Hydraulic Hose Connections - Base Page 55
56 3. Base Assembly M7053AD Page 56
57 3. Base Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts GROUP, Base ASSEMBLY, Base 6926 WELDMENT, Base SWITCH, Main Power Disconnect TRIM, Protective / - / BOLT, Carriage (/2-3 x -/2 ) NUT, Hex Hd Jam (/2-3) COVER, Spacer WASHER, Lock (/ ) BOLT, Hex Hd (/ -20 x 5/8 ) ASSEMBLY, Base Cover WELDMENT, Cover PLATE, Base Cover - Rear 30 8 RIVET, Pop (/ x 0.70 ) ASSEMBLY, Static Trap STRAP, Ground BOLT, Hex Hd (3/8-6 x 3/ ) WASHER, Lock (3/8 ) NUT, Hex Hd (3/8-6) 3 (Ref.) 2 ASSEMBLY, Front Hub (For components, refer to Section 3.2) (Ref.) ASSEMBLY, Cylinder - Steer (For components, refer to Section 3.3) 5 (Ref.) 2 ASSEMBLY, Rear Brake (For components, refer to Section 3.) 6 (Ref.) ASSEMBLY, Manifold - Drive (For components, refer to Section 3.5) 7 (Ref.) ASSEMBLY, Manifold - Brake Release (For components, refer to Section 3.6) 8 (Ref.) HOSE CONNECTIONS, Base (For components, refer to Section 3.7) 9 (Ref.) ASSEMBLY, Pothole Protection - Battery and Hydraulic Tray (For components, refer to Section 3.8) 20 (Ref.) ASSEMBLY, Wheels (For components, refer to Section 3.9) 2 (Ref.) ASSEMBLY, A/C Outlet (For components, refer to Section.5) 22 (Ref.) ASSEMBLY, Tilt Switch and Bracket (ANSI/CSA and KC) (For components, refer to Section 3.0) 22 (Ref.) ASSEMBLY, Counter Reset (CE) (For components, refer to Section 3.2) 23 (Ref.) ASSEMBLY, Base Control (For components, refer to Section 3.) 2 (Ref.) ASSEMBLY, Battery Tray (For components, refer to Section 5.) 25 (Ref.) ASSEMBLY, Hydraulic Tray (For components, refer to Section.) Parts list continued on the following page. Page 57
58 3. Base Assembly (Continued) M7053AD Page 58
59 3. Base Assembly (Continued) Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. Parts list continued from the previous page ASSEMBLY, Ladder WELDMENT, Ladder BOLT, Hex Hd (3/8-6 x ) WASHER, Lock (3/8 ) WASHER, Flat (3/8 ) COUNTERWEIGHT (ANSI) COUNTERWEIGHT (CE/AS/KC) BOLT, Hex Hd (/2-3 x 2-/ ) WASHER, Flat (/2 ) NUT, Lock (/2-3) Page 59
60 3.2 Front Hub Assembly K M9898AD_2 Page 60
61 3.2 Front Hub Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 9898 ASSEMBLY, Front Hub - Hydraulic Side B 9899 ASSEMBLY, Front Hub - Battery Side 987 WELDMENT, Housing - Wheel Motor, A 9875 WELDMENT, Housing - Wheel Motor, B MOTOR, Wheel cu.in BEARING, Front Roller 9762 NUT (-/8"-8) SHAFT KEY, Rounded (-/2") BUSHING, Center Boss BUSHING, Center Boss WASHER, Kingpin ASSEMBLY, Pin - Steering Long ASSEMBLY, Pin - Steering Short ASSEMBLY, Arm - Steering 9752 ARM, Steering FITTING, Straight - Grease (/ -28) PIN, Cylinder End 7362 HUB, -/ WASHER, Lock - Internal Tooth (-/8 ) FITTING, 90D (08JICM - 0ORBM) WASHER, Flat - Hard (/2 ) WASHER, Lock (/2 ) WASHER, Lock (5/6 ) BOLT, Hex Hd (/2-3 x 3 ) BOLT, Hex Hd (5/6-8 x 5/8 ) RETAINER, Drive Link SCREW, FHCS (/ -20 x ) PIN, Cotter (/8 dia x -/2 ) K SEAL KIT (Not Shown) Page 6
62 3.3 Steer Cylinder Assembly K K 3 K K M9823AB Part ASSEMBLY, Cylinder - Steer NOTE: Part Numbers followed by a DG indicate dark grey painted parts CYLINDER, Steer 9982 TUBE WELDMENT, ROD AND PISTON ROD COVER SPACER END, Rod - Steel Ball Joint w/ Grease Fitting FITTING, Straight (06JICM - 06ORBM) ORIFICE, Steer (0.035") NUT, Hex Hd (3/ -6) WASHER, Lock - Internal Tooth ( ) NUT, Hex Hd ( -) K 9987 SEAL KIT Page 62
63 3. Rear Brake Assembly M7057AD Part ASSEMBLY, Rear Brake NOTE: Part Numbers followed by a DG indicate dark grey painted parts BRAKE, Rear NUT (-/8"-8) SHAFT KEY, Rounded (-/2") 9270 BOLT, Hex Hd (/2-3 x ) WASHER, Flat (/2 ) NUT, Lock (/2-3) FITTING, Straight (0JICM - 0ORBM) FITTING, Plug (07 ORBM) WASHER, Lock - Internal Tooth (-/8 ) HUB, -/2 (Ref.) - BRAKE OIL, SAE 20W (For components, refer to Section 9.0) Page 63
64 3.5 Drive Manifold Assembly M732AC Page 6
65 3.5 Drive Manifold Assembly Part ASSEMBLY, Manifold - Drive NOTE: Part Numbers followed by a DG indicate dark grey painted parts. 785 MANIFOLD, Drive ORIFICE, Plug - Crossover (0.020 ) ORIFICE, Disc - Differential (0.00") VALVE, Solenoid - 3-Way Spool VALVE, Solenoid - 2-Way Spool VALVE, Flow Divider VALVE, Needle - Positive Shut-Off COIL, 20 VDC COIL, 20 VDC FITTING, 90D (06JICM - 08ORBM) FITTING, 90D (0JICM - 0ORBM) FITTING, Straight (08JICM - 08ORBM) PLUG, Port (#) FITTING, Straight (6 SAE - JIC) WASHER, Flat (3/8 ) WASHER, Lock (3/8 ) BOLT, Hex Hd (3/8-6 x ) Page 65
66 3.6 Brake Release Manifold Assembly M3653AE Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Manifold - Brake Release MANIFOLD, Brake Release 6563 BLOCK, Manifold - Brake Release ASSEMBLY, Valve HANDLE, Valve ASSEMBLY, Pump HANDLE, Pump FITTING, Straight ( JIC) BOLT, Hex head (3/8-6 x 7/8, Grade 8) WASHER, Flat (3/8 ) WASHER, Lock (3/8 ) K 656 SEAL KIT (Not Shown) Page 66
67 3.7 Hydraulic Hose Connections - Base M7323AB Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts HOSE CONNECTIONS, Base HOSE, Hydraulic (Drive Manifold BRP. to Brake Manifold) HOSE, Hydraulic (Drive Manifold M to Right Motor A) HOSE, Hydraulic (Drive Manifold M2 to Left Motor B) 968 HOSE, Hydraulic (Drive Manifold M3 to Right Motor B) HOSE, Hydraulic (Drive Manifold M to Left Motor A) HOSE, Hydraulic (Hose Main Manifold H-2 to Steer - LH Turn) HOSE, Hydraulic (Hose Main Manifold H-23 to Steer - RH Turn) 8 H HOSE, Hydraulic (Left Brake to Brake Manifold) 9 H HOSE, Hydraulic (Right Brake to Brake Manifold) SLEEVE, Nylon - Hose Protection (HG-28) 09 0 SLEEVE, Nylon - Hose Protection (HG-28) Page 67
68 3.8 Pothole Protection Assembly M70235AB Page 68
69 3.8 Pothole Protection Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 6935 ASSEMBLY, Pothole Bar - Hydraulic Side B 693 ASSEMBLY, Pothole Bar - Battery Side LOCK, Tray cam PIN, Pothole Hinge PIN, Spring (0.09 x ) PIN, Spring (0.09 x ) PIN, Lock - Stainless BUSHING, Fiberglide (3/8 dia x 5/8 ) BUSHING, Fiberglide (7/6 dia x 3/8 ) WELDMENT, Angle - Pothole Bar Hydraulic Side, A WELDMENT, Angle - Pothole Bar Battery Side, B ASSEMBLY, Pothole Protection BAR, Pothole Lever BUSHING, Fiberglide (7/6 dia x /2 ) PIN, Cotter (3/32" x PIN, Clevis (7/6 dia x -/ ) ASSEMBLY, CAM LOCK PIN, Guide - Pothole Spring (3/ dia x 8 ) 878 LOCK, Driver - Pothole 5 93 SPRING, Pothole LOCATOR, Pothole Pin BUSHING, Self Lubricating (3/ dia x ) LOCK, Cam - Pothole WASHER, Flat (-/6 ) PIN, Spring (3/32 dia x -3/8 ) ASSEMBLY, Compression Rod - Pothole ROD ASSY, Pothole Compression BOLT, Carriage (3/ -0 x 2, Gr 5) NUT, Hex Hd (3/ -0, Gr B) BAR, Kicker - Pothole PIN, Clevis (7/6 x 53/6 ) SPRING, Compression - Pothole GUARD, Pothole - Battery Side GUARD, Pothole - Hydraulic Side PIN, Clevis (7/6 x -3/ ) SCREW, Socket Hd (#8-32 x -/ ) NUT, Lock - Nylon (#8-32) WASHER, Flat (7/6 ) SET SCREW, Square Hd (3/8-6 x 3/, Gr 5 ZN) BUSHING, Handrail Slide BOLT, Hex Hd (/"-20 x /2", Gr 5) WASHER, Lock (/ ) WASHER, Flat (/ ) LIMIT SWITCH, Pothole - Hydraulic Tray, A (ANSI/CSA & KC) LIMIT SWITCH, Pothole - Hydraulic Tray, A (CE & AS) LIMIT SWITCH, Pothole - Battery Tray, B (ANSI/CSA & KC) LIMIT SWITCH, Pothole - Battery Tray, B (CE & AS) Page 69
70 3.9 Wheel Assembly 2 M689AB Part ASSEMBLY, Wheel NOTE: Part Numbers followed by a DG indicate dark grey painted parts. 689 TIRE, Grey - Non-Marking (6x5x2) BOLT, Wheel Page 70
71 3.0 Tilt Switch and Bracket Assembly (ANSI/CSA & KC) M7376AC Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Tilt Switch and Bracket (ANSI/CSA & KC) 7560 ASSEMBLY, Tilt Switch (.5 x 3.5) WASHER, Lock (/ ) NUT, Hex Hd (/ -20, Gr 8) BOLT, Hex Hd (/ -20 x, Gr 5) PLATE, Mount - Tilt Switch NUT, Machine (#0-32) SCREW, Round Hd (#0-32 x 5/8 ) WASHER, Lock (#0) Page 7
72 3. Base Control Assembly L A B C D E F 2 8 M7693AC Page 72
73 3. Base Control Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 7693 ASSEMBLY, Base Control (ANSI/CSA & KC) B 777 ASSEMBLY, Base Control (CE) C ASSEMBLY, Base Control (AS) ASSEMBLY, Cover - Base Control COVER, Base Control ASSEMBLY, Key Switch - 3 Way (Off/Platform/Base), A, C ASSEMBLY, Key Switch - 3 Way (Off/Platform/Base), B HEAD, Key Switch - 3 Position, A, C HEAD, Key Switch - 3 Way, B 2 37 HOUSING, Connector - 6 Way NUT, Key Switch KEY, # BOOT, Key Switch ASSEMBLY, Switch - Emergency Stop SWITCH HEAD, Emergency Stop BLOCK, Contact (N.C.) BLOCK, Led - 2V (Red) LATCH 977 ASSEMBLY, Key Switch - 2 Way (Lower/Neutral/Raise) 7069 SWITCH HEAD, Selector BLOCK, Contact (N.O.) 7056 LATCH CONNECTOR, Receptacle CONNECTOR, Wedge CONNECTOR, Contact Pin CONTROL CABLE, 6/ PLATE, Mount - Base Control L (Ref.) - LABELS (For components, refer to Section 8.) WASHER, Lock (/ ) BOLT, Hex Hd (/ -20 x 3-/ ) Page 73
74 3.2 Counter Reset (CE) M9903AA Part NOTE : Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Counter Reset (CE only) BRACKET, 0V Outlet BOX, 0V Outlet - Assembled COVER, Black - 0V Outlet (Ref.) HARNESS, Reset Fuse (For components, refer to Section 6.5) BOLT, Hex Hd (/ -20 x, Gr 5) BOLT, Hex Hd (/"-20 x 3/", Gr 5) WASHER, Flat (/") WASHER, Lock (/") NUT, Hex Hd (/ -20, Gr 8) Page 7
75 .0 HYDRAULIC TRAY RELATED PARTS.6 Hydraulic Hose Connections - Hydraulic Tray. Hydraulic Tray. Pump and Motor Emergency Lowering.3 Hydraulic Tank Lid.2 Main Manifold.5 Page 75
76 . Hydraulic Tray Group Detail A Detail A TO MAIN DISCONNECT + TO BATTERY TRAY M9532AB_ Page 76
77 . Hydraulic Tray Group Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A ASSEMBLY, Hydraulic Tray (ANSI) B ASSEMBLY, Hydraulic Tray (CE/AS/KC) ASSEMBLY, Tray - Hydraulic WELDMENT, Tray - Hydraulic 2 (Ref.) ASSEMBLY, Pothole Protection (For components, refer to Section 3.8) ASSEMBLY, Latch - Hydraulic Tray Rotary 2307 LATCH, Rotary NUT, Hex Hd (/ -20, Gr 8) BOLT, Hex Hd (5/6-8 x ) BOLT, Hex Hd (/ -20 x, Gr 5) WASHER, Lock (/ ) 9 53 KNOB, Latch INSTALLATION, Tray to Base PIN, Eccentric - Upper Tray ( dia x 2-/6 ) 8983 PIN, Bottom Tray (0.750 dia x -7/8 ) TRIM, Protective - Standard Double Lip BUSHING, Bronze ASSEMBLY, Plug - Tank (3/ -6 Magnetic Thread) 9606 PLUG, Drain - Magnetic Thread Gasket WASHER, Drain Sealing Plug 6 80 BOLT, Carriage (3/8-6 x ) BOLT, Carriage (/2-3 x -/2 ) NUT, Hex jam (/2-3) NUT, Hex jam (3/8-6) 20 (Ref.) ASSEMBLY, Lid - Hydraulic Tank (For components, refer to Section.2) ASSEMBLY, Cylinder - Cushion CYLINDER, Cushion BRACKET, Conduit WASHER, Flat (/ ) WASHER, Lock (/ ) BOLT, Hex Hd (/"-20 x /2", Gr 5) WELDMENT, Counterweight - Hydraulic Tray 27 (Ref.) ASSEMBLY, Motor/Pump -.8CC (For components, refer to Section.) BOLT, Hex head (/2-3 x 3-3/ ) WASHER, Flat (/2 ) WASHER, Lock (/2 Gr 5) ASSEMBLY, Level Indicator INDICATOR, 3 Level BOLT, Hex head (/ -20 x /2 ) Parts list continued on the following page. Page 77
78 . Hydraulic Tray Group (Continued) Detail A Detail A TO MAIN DISCONNECT + TO BATTERY TRAY M9532AB_ Page 78
79 . Hydraulic Tray Group (Continued) Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. Parts list continued from the previous page SUBGROUP, Motor Controller ASSEMBLY, Motor Controller CONTROLLER, Pump/Motor (2VDC, 360 Amp) BOLT, Hex Hd (/"-20 x 3/", Gr 5) BOLT, Hex Hd (/ -20 x, Gr 5) WASHER, Lock (/ ) WASHER, Flat (/ ) CLIP, Double (G0) NUT, Hex Hd (/ -20, Gr 8) ASSEMBLY, Contactor KIT, Contactor - Motor Controller BOLT, Hex Hd (/"-20 x /2", Gr 5) WASHER, Flat (/ ) WASHER, Lock (/ ) KIT, Power Cable 9550 CABLE, Welding - Main Contactor Positive to Main Disconnect Positive CABLE, Welding - Main Contactor Negative to Battery Negative CABLE, Welding - Battery Tray Negative to Battery Negative CABLE, Welding - Pump/Motor Positive to Motor Positive CABLE, Welding - Pump/Motor Negative to Battery Negative INSULATOR, Boot (Red) 50 (Ref.) - ASSEMBLY, Manifold - Main (For components, refer to Section.5) BOLT, Hex head (3/8-6 x 2-/2, Gr 5) WASHER, Flat (3/8 ) WASHER, Lock (3/8 ) 5 (Ref.) - ASSEMBLY, Emergency Lowering (For components, refer to Section.3) ASSEMBLY, Hose - Suction HOSE, Tank Truck (3/ x.00 ) CLAMP, Worm (#2) 57 (Ref.) - HOSE CONNECTIONS, Hydraulic Tray (Not Shown) (For components, refer to Section.6) 58 (Ref.) - OIL, Hydraulic (Not Shown) (For components, refer to Section 9.0) Page 79
80 .2 Hydraulic Tank Lid Assembly M29602AD Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Lid - Hydraulic Tank 09267DG WELDMENT, Hydraulic Tank Lid ASSEMBLY, Manifold - Manual Lowering w/ Fittings SUB-ASSEMBLY, Manifold - Manual Lowering 2 32 MANIFOLD, VC PLUG, Expander 0727 VALVE, Directional - Manual FITTING, Straight - Connector (06 JICM - 06 ORBM) FILTER, Hydraulic Inlet FITTING, Straight - Connector (#2 ORB - #6) HOSE, Filter to Tank Clamp, Gear - # ASSEMBLY, Filler/Cap SCREW, Machine (#0-32 x /2 ) GASKET, Hydraulic tank BOLT, Hex head (5/6-8 x ) NUT, Hex Nylon Lock (5/6-8, Gr B) Page 80
81 .3 Emergency Lowering Assembly M95582AC Part NOTE : Part Numbers followed by a DG indicate dark grey painted parts ASSEMBLY, Emergency Lowering ASSEMBLY, Toggle Switch - E-Lower 9900 SWITCH, Toggle - SPST BRACKET, Switch - E-Lower BREAKER, 0 Amp 692 SCREW, Round Hd (#8-32 x 5/8 ) NUT, Lock (#8-32) COVER, Breaker - Red COVER, Breaker - Black (Switch) CAP, Toggle Switch - Red 9 (Ref.) HARNESS, Emergency Lowering Switch (For components, refer to Section 6.5) 0 (Ref.) HARNESS, Breaker Assembly (For components, refer to Section 6.5) Page 8
82 . Motor and Pump Assembly Page 82 M9532AB
83 . Motor and Pump Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts GROUP, Motor/Pump -.8cc ASSEMBLY, Motor/Pump -.8cc MOTOR, 2VDC PUMP, Hydraulic FITTING, 90 (2 BEAD - 0 ORBM) 9999 BOLT, Socket Hd (M8 x 95, CL2.9 ZN) (Not Shown) KIT, Brush Repair (Not Shown) DG PLATE, Mount - Motor Universal BOLT, Hex Hd (5/6-8 x 3/ ) WASHER, Flat (5/6 ) WASHER, Lock (5/6 ) FITTING, Elbow 90 (06 JICM - 08 ORBM) K KIT, Seal (Not Shown) Page 83
84 .5 Main Manifold Assembly M96592AC_ Page 8
85 .5 Main Manifold Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 2002 ASSEMBLY, Manifold - Main (ANSI) B 2003 ASSEMBLY, Manifold - Main (CE/AS/KC) 0735 MANIFOLD, Main 9 BLOCK, Manifold PLUG, Expander FITTING, Plug (#8) COIL, 2 Volt VALVE, 3-Way VALVE, System Relief COIL, 2 Volt VALVE, Solenoid PLUG (#3) FITTING, Plug (06 ORBM) VALVE, Counterbalance 09 PLUG (/6 NPT) FITTING, Straight (06 JICM - 06 ORBM), A FITTING, Straight (06 JICM - 06 ORBM), B 3 58 FITTING, Tee (06 JICM - 06 ORBM - 06 JICM) 580 FITTING, Elbow 5 (06 JICM - 06 ORBM) FITTING, Elbow 90 (06 JICM - 0 ORBM) NUT, Cap (06 JICF), A ASSEMBLY, Quick Disconnect, B COUPLER, B 6 52 COVER, Dust, B FITTING, Straight (06 ORBM - 06 ORBM), B VALVE, Solenoid VALVE ASSY, Directional COIL, 2 Volt VALVE ASSY, Directional - Open Center BOLT, SHC (#0-2 x 2 ) BOLT, SHC (#0-2 x -3/ ) HOSE, Hydraulic Line (Main Manifold to Cushion Cylinder) ORIFICE, Pressure Plug (0.3 ) BUMPER, Rubber Male SCREW, Hex Hd Machine (/ -20 x ) Page 85
86 .6 Hydraulic Hose Connections - Hydraulic Tray M9532AB_Hoses Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. H HOSE, Hydraulic (Main Manifold to Pump Outlet) HOSE, Hydraulic (Main Manifold to Manual Lowering Valve) HOSE, Hydraulic (Main Manifold to Filter Inlet) 3775 HOSE, Hydraulic (Drive Manifold Brake to Main Manifold Brake) HOSE, Hydraulic (Main Manifold H-6 to Drive Manifold IN) HOSE, Hydraulic (Main Manifold H-5 to Drive Manifold INR) Page 86
87 5.0 BATTERY TRAY RELATED PARTS Battery Tray Assembly 5. Battery Battery Charger 5 Page 87
88 5. Battery Tray Assembly M6933AC Page 88
89 5. Battery Tray Assembly Part ASSEMBLY, Battery Tray NOTE: Part Numbers followed by a DG indicate dark grey painted parts WELDMENT, Battery Tray ASSEMBLY, Latch - Battery Tray Rotary LATCH, Rotary Right Hand BOLT, Hex head (5/6-8 x ) BOLT, Hex Hd (/ -20 x, Gr 5) WASHER, Lock (/ ) NUT, Hex Hd (/ -20, Gr 8) 8 53 KNOB, Latch INSTALLATION, Tray to Base PIN, Eccentric - Upper Tray (.00 dia x 2-/6 ) PIN, Bottom Tray (3/ dia x -7/8 ) BUSHING, Bronze 2 80 BOLT, Carriage (3/8-6 x ) BOLT, Carriage (/2-3 x -/2 ) NUT, Hex jam (3/8-6) NUT, Hex jam (/2-3) 6 (Ref.) - ASSEMBLY, Pothole Protection (For components, refer to Section 3.8) Page 89
90 5.2 Battery Assembly L L M78AD Page 90
91 5.2 Battery Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A 78 - ASSEMBLY, Battery - Standard (ANSI/CSA, CE & KC) B ASSEMBLY, Battery - Standard (AS) C ASSEMBLY, Battery - AGM (ANSI/CSA & CE) PLYWOOD (3/8" x " x 33"), A, C NEOPRENE SHEET (/" x " x 28.50"), B SPACER, Plastic (2" x 3" x ") BATTERY, 2V, A, B BATTERY, 2V - AGM, C INSULATOR, Boot - Black INSULATOR, Boot - Red INSULATOR, Boot - Red CABLE, Welding - #Ga (5/6" x 6" x 5/6") CABLE, Welding - #Ga (5/6" x 0" x 5/6") CABLE, Battery - 300A In-line Fuse CABLE, Welding - #Ga (5/6" x 8" x 3/8") (+,+) INSULATOR, Fuse TERMINAL, Boot - Red WASHER, Lock (/") WASHER, Flat (/") BOLT, Hex Hd (/"-20 x /2", Gr 5) L (Ref.) - LABELS (For components, refer to Section 8.) Page 9
92 5.3 Charger Assembly 3 2 M97633AA Page 92
93 5.3 Charger Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A ASSEMBLY, Charger - Signet (ANSI/CSA & AS) B ASSEMBLY, Charger - Signet (CE & KC) C ASSEMBLY, Charger - AGM (ANSI/CSA) D ASSEMBLY, Charger - AGM (CE) 707 CHARGER, 750W Chord - Signet, A 708 CHARGER, 750W Socket - Signet, B 9975 CHARGER, 750W Chord - AGM, C CHARGER, 750W Socket - AGM, D BOLT, Hex Hd (/"-20 x 3/", Gr 5) WASHER, Flat (/") 0000 WASHER, Lock (/") CORD, Charger - 220V, B, D Page 93
94 Notes Page 9
95 6.0 ELECTRICAL RELATED PARTS 6 Electrical Panel Control Cable Assembly Rear Manifold Harness Main Manifold Harness 6.5 Electrical Panel Harnesses 6.6 Battery Cables 6.7 Dual Flashing Light Harness 6.8 RST Wire Assembly Page 95
96 6. Electrical Panel Assembly KC CE/AS 7 ANSI/CSA L M96050AB_ Page 96
97 6. Electrical Panel Assembly Part NOTE: Part Numbers followed by a DG indicate dark grey painted parts. A ASSEMBLY, Electrical Panel (ANSI/CSA) B ASSEMBLY, Electrical Panel (CE) C ASSEMBLY, Electrical Panel (AS) D ASSEMBLY, Electrical Panel (KC) - - ASSEMBLY, Electrical Panel 63057DG WELDMENT, Electrical Panel HOURMETER, Digital, A, C, D HOURMETER, Counter, B BREAKER, Circuit - 5 Amp RELAY, 2 Volt, A RELAY, 2 Volt, B RELAY, 2 Volt, C RELAY, 2 Volt, D CLAMP, Plastic (-/ ) TERMINAL BLOCK, 9P TERMINAL BLOCK, 2P BUMPER, Rubber - Female SCREW, Round Hd (#6-32 x ) SCREW, Round Hd (#0-32 x /2 ), A SCREW, Round Hd (#0-32 x /2 ), B SCREW, Round Hd (#0-32 x /2 ), C SCREW, Round Hd (#0-32 x /2 ), D SCREW, Round Hd (#8-32 x /2 ) NUT, Hex (#6-32) NUT, Hex (#0-32), A NUT, Hex (#0-32), B NUT, Hex (#0-32), C NUT, Hex (#0-32), D NUT, Hex (#8-32) WASHER, Lock (#0), A WASHER, Lock (#0), B WASHER, Lock (#0), C WASHER, Lock (#0), D WASHER, Lock (/ ) WASHER, Flat (/ ) NUT, Hex Hd (/ -20, Gr 8) BOLT, Hex Hd (/ -20 x 5/8 ) BEEPER, Slow Pulsing - -28VDC, A BEEPER, Slow Pulsing - -28VDC, D PLUG (-/8 dia), A PLUG (-/8 dia), B, C RESISTOR ASM,.5 Ohm, A, B, C RESISTOR ASM, 7.5 Ohm - AGM Option A, B BOLT, Hex Hd (/"-20 x /2", Gr 5) WASHER, Lock (/ ) CLAMP, Single, A, C, D CLAMP, Single, B L (Ref.) - LABELS (For components, refer to Section 8.) Page 97
DC ELECTRIC SCISSORS MODELS SJIII 3220 SJIII 3226 SJIII 4620 SJIII 4626 SJIII 4632
PARTS MANUAL (KC) DC ELECTRIC SCISSORS MODELS AA November 0 This manual is based on Serial Numbers: SJIII 0 SJIII SJIII XX 0 00 89 & Above 7 07 55 & Above 70 07 59 & Above Please refer to the website -
More informationPARTS MANUAL (ANSI/CSA & KC) DC ELECTRIC SCISSORS MODELS SJIII 3220 SJIII 3226 SJIII 4620 SJIII 4626 SJIII 4632
PARTS MANUAL (ANSI/CSA & KC) DC ELECTRIC SCISSORS MODELS AF November 0 This manual is based on Serial Numbers: SJIII 0 0 00 to 0 00 88 SJIII 7 00 0, 7 00 0, 7 00 07, 7 00 to 7 07 0 SJIII XX 70 00, 70 00,
More informationIMPORTANT Verify if your machine is hydraulically proportional or motor controlled.
. IMPORTANT Verify if your machine is hydraulically proportional or motor controlled. Motor controller machines can be identified by the MC label located on the side of the machine or on the platform control
More informationPARTS MANUAL VERTICAL MAST MODELS SJ12 SJ16
PARTS MANUAL VERTICAL MAST MODELS SJ SJ6 AA May 0 This manual is based on Serial Numbers: SJ / SJ 6: 4,00,630 & Above Including Serial Numbers: 40047 & 40043 Please refer to the website - www.skyjack.com
More informationService Bulletin #117 SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT Brake Manifold Assembly Replacement
Service Bulletin #117 SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT September 4, 2013 Models Affected: SJ7127 RT, SJ7135 RT, SJ8841 RT, SJ9250 RT SJ7127 RT 34002586, 34002587, 34002588, 34002592 SJ7135 RT
More information**********SAFETY RELATED**********
Service Bulletin #124 SJ 40T/45T/61T/66T/46AJ/51AJ Installation and Axle Drive Motor Replacement **********SAFETY RELATED********** March 28, 2014 Models Affected: SJ40T, SJ45 T, SJ 61T, SJ66T, SJ46 AJ,
More informationService Bulletin #125 SJ 40T/45T/61T/66T/63AJ System Pump Replacement
Service Bulletin #125 SJ 40T/45T/61T/66T/63AJ April 16, 2014 Models Affected: SJ40T, SJ45 T, SJ 61T, SJ66T, SJ63 AJ SJ40T 98001175, 98001176, 98001177, 98001178, 98001179, 98001181, 98001187, 98001201,
More informationCOMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES GENERAL INFO. casecoltingersoll.
R Ingersoll COMPACT WHEEL LOADERS 7020, 7020BH Parts Catalog 8-3370 HOME TRACTORS ATTACHMENTS PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (PIN) AND SERIAL NUMBERS (S/N) TRACTOR MODEL AND
More informationCOMPACT WHEEL LOADERS PIN and after 6018BH - PIN and after 6020L, 6020BH Parts Catalog
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - PIN 14190349 and after 6018BH - PIN 14190351 and after 6020L, 6020BH Parts Catalog 8-3360 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO MAIN INDEX
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More information365L (2001) Page 1 of 36 54" Deck Assembly
365L (2001) Page 1 of 36 54" Deck Assembly 365L (2001) Page 2 of 36 54" Deck Assembly 1 720-0241 1 S Wing Nut Knob 2 703-2817 1 Belt Cover LH 3 703-2816 1 Belt Cover RH 4 747-3306 1 Idler Spring Mounting
More informationPARTS CATALOG ODYSSEY INCLUDES MOWER
PARTS CATALOG 8-3350 ODYSSEY INCLUDES MOWER INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS (P.I.N.) OR SERIAL NUMBERS (S/N) ENGINE MODEL, SERIAL AND SPECIFICATION NUMBERS TRACTOR MODEL
More informationCOMPACT WHEEL LOADERS before PIN BH - before PIN Parts Catalog Ingersoll HOME TRACTORS ATTACHMENTS INDEX ENGINES
R Ingersoll HOME COMPACT WHEEL LOADERS 6018 - before PIN 14190349 6018BH - before PIN 14190351 Parts Catalog 8-3052 TRACTORS ATTACHMENTS INDEX PAINT ENGINES GENERAL INFO PRODUCT IDENTIFICATION NUMBERS
More informationModel 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
More informationPARTS CATALOG
R Ingersoll COMPACT TRACTORS WITH DIESEL ENGINES 3118D AND 4118D PARTS CATALOG 8-3310 PAINT ENGINES GENERAL INFO MODEL 3118D and 4118D COMPACT TRACTORS PRODUCT IDENTIFICATION NUMBERS (PIN) OR SERIAL NUMBERS
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES AND R SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBERS BEFORE G000 WITH SERIAL NUMBERS AFTER G00000 FOR DOWN PRESSURE HYDRAULICS
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
More informationDIAMOND CONCRETE SAW PARTS LIST MODEL CC8000 P R O D U C T S. (Revised )
DIAMOND P R O D U C T S CONCRETE SAW PARTS LIST MODEL CC8000 (Revised 10-15-2002) Table of Contents Page Saw Controls Legend. 3 Drawing 1. Frame Group. 4-5 Drawing 2. Arm Assembly... 6-7 Drawing 3. Hydraulics
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G"
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES "G" MODEL LT160H42GBV LT160H42GBV2 LT180H48GBV2 WLT160H42GBV WLT180H48GBV2 McDonough, GA, 30253 U.S.A. COPYRIGHT 2006 SNAPPER PRODUCTS,
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 9, 9T & SERIES SNOW PLOWS WITH EIS FOR PLOW SERIAL NUMBERS AFTER 9G100000, 9D100000, 9C100000 9TG100000, 9TD100000, 9TC100000 G10000, D100, C10000 00 Sno-Way International 910089H
More informationCONTAINER GUIDE WELDMENTS
CONTAINER GUIDE WELDMENTS FOR MODELS - ALL FRONT LOAD CONTAINERS 4/98 1 9110--39--0 L.H. Container Guide Weldment 1 2 9110--38--0 R.H. Container Guide Weldment 1 3 9110--56--1 Instruction Sheet (Not Shown)
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL HD, R & THD SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBER AFTER: HDG00000 FOR DOWN PRESSURE HYDRAULICS WITH SERIAL NUMBERS AFTER:
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER D0000 G0000 00 Sno-Way International 9F TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... POWER PACK FRAME... BLADES... HYDRAULIC SYSTEM
More informationM REV. D DECEMBER Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns
M-07- REV. D DECEMBER 009 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL HD, R & THD SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY HYDRAULICS WITH SERIAL NUMBER AFTER: HDG00000 FOR DOWN PRESSURE HYDRAULICS WITH SERIAL NUMBERS AFTER:
More informationPARTS MANUAL. SERIAL NO: to BAND SAWING MACHINE
PARTS MANUAL MODEL: TF-2025M SERIAL NO: 543-99101 to BAND SAWING MACHINE MACHINE SPECIFICATIONS MODEL VOLTAGE CYCLE PHASE SERIAL NO. For your information and future reference, insert pertinent data concerning
More information10 PARTS LIST 10.1 Lift Assembly
10 PARTS LIST 10.1 Lift Assembly 30 10.2 Lift Assembly Parts List ITEM NO. QTY. DESCRIPTION PART NO. 1 1 DECK WELDMENT RHS 4-1091 1 DECK WELDMENT LHS 4-1090 2 54 BALL BEARING 6-2940 3 2 REAR SLIP PLATE
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER D00000 G00000 007 Sno-Way International 9700D TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... POWER PACK FRAME... BLADES... HYDRAULIC
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393001 COMPLETE MOTOR ASSEMBLY 1 101 3391221 NEGATIVE LEAD 1 102 3391201 1/4-20 X 7 3/4THRU BOLT 2 103 10-24
More informationCOVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL, HD, R, T, THD & SERIES SNOW PLOWS WITH EIS PLOW LIGHT HARNESS CONNECTIONS FOR GRAVITY & CENTRAL HYDRAULICS WITH SERIAL NUMBERS BEFORE: G000, TG00, G000, C00 WITH SERIAL NUMBER AFTER:
More informationMM184 Rev. 12 (9 94)
465 480 490 MM184 Rev. 12 (9 94) This manual is furnished with each new TENNANT Model 465, 480, and 490. It provides necessary operating and preventive maintenance instructions. Read this manual completely
More information13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly
13AU609H063 (1999) Page 1 of 25 Axle & Wheels Front And Steering Assembly 13AU609H063 (1999) Page 2 of 25 Axle & Wheels Front And Steering Assembly 1 683-0304 1 S Frame 2 710-0604A 1 /P Self-tapping Screw,
More informationS/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly
1180 S/N 1H019H - 1H310H Page 1 of 33 46" Cutting Deck Assembly 1180 S/N 1H019H - 1H310H Page 2 of 33 46" Cutting Deck Assembly 1 17982 1 S Reinforcement Spindle Plate 2 618-0430 1 S Spindle Assembly w/
More informationLAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F
Parts Manual for LAWN TRACTORS ELECTRIC CLUTCH HYDRO DRIVE SERIES F MODELS LT160H42FBV LT160H42FBV2 LT180H48FBV2 IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL 28V SERIES SNOW PLOWS FOR PLOW SERIAL NUMBERS AFTER 28VG100000 28VD100000 07 Sno-Way International 9710097F TABLE OF CONTENTS Page PARTS LIST INTRODUCTION... 2 POWER PACK FRAME...
More informationPIÈCES DÉTACHÉES ELT125D33 1KV. Tondeuse autoportée
PIÈCES DÉTACHÉES Tondeuse autoportée ELT15D33 1KV Yvan Béal - 1, av. de l Agriculture - B.P. 16 Z.I. du Brézet - 63014 Clermont-Ferrand Cedex Tél : 04 73 91 93 51 - Télécopie : 04 73 90 3 11 www.yvanbeal.fr
More informationChampion Series Zero-Turn Riders & Mower Decks
Parts Manual Champion Series Zero-Turn Riders & Mower Decks HP Tractors Mfg. No. Description Champion, HP Zero-Turn Rider Champion, HP Zero-Turn Rider (CE) 0HP Tractors Mfg. No. Description Champion, 0HP
More informationSTX-38 EFI Stump Grinder with Intelli-Sweep
Form No. 3421-244 Rev A STX-38 EFI Stump Grinder with Intelli-Sweep Model No. 23214 Serial No. 402000000 and Up Register at www.toro.com. Original Instructions (EN) *3421-244* A Ordering Replacement Parts
More information215E. Operator and Parts Manual MM158
5E Operator and Parts Manual MM58 This manual is furnished with each new TENNANT Model 5E This manual consists of Specifications; Operation; Maintenance; Appendix; the How To Use This Manual; Low Dump
More information25 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower
MMZ 2, 260 2 Horsepower Hydrostatic Zero-Turn Commercial Riding Mower ILLUSTRATED PARTS LIST " Float Cutter Deck - Figure 1 3 1 27 32 17 6 1 11 31 36 3 19 7 23 1 33 38 18 37 22 3 20 2 10 2 12 21 30 39
More informationmi Model 108 Compact Tractor Parts Catalog
mi Model 108 Compact Tractor Parts Catalog Catalog No. 1226 PRICE 75 CENTS CASE MODEL 108 COMPACT TRACTOR Parts Catalog No. 1226 Leitch 2500 9-72 "'^^^l" 1" ifif --C: ^1=5 t^dj d- CASE MODEL 108 COMPACT
More informationSECTION 1 - BASE... 7 FIGURE 1-1. BASE MOUNTED COMPONENTS INSTALLATION... 8 SECTION 2 - CONTROLS... 11
3121164 9MP 3 TABLE OF CONTENTS SECTION 1 - BASE... 7 FIGURE 1-1. BASE MOUNTED COMPONENTS INSTALLATION... 8 SECTION 2 - CONTROLS... 11 FIGURE 2-1. PUMP/MOTOR/GROUND CONTROL INSTALLATIONS... 12 FIGURE
More informationFloorCrafter Belt Sander
FloorCrafter Belt Sander Section II Parts and Service Manual (0255B-DE) U.S. Patent No. 5,55,0 and No. 6,58,858 Clarke American Sanders FloorCrafter Bedienungshandbuch Page 2 FloorCrafter Main Assembly
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 54" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 54" Fabricated
More informationParts Manual Contains:
Parts Manual Contains: M-0- REV. B JANUARY 009 Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 009 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
More informationS/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly
1170 S/N 1H019H - 1H310H Page 1 of 48 42" Cutting Deck Assembly 1170 S/N 1H019H - 1H310H Page 2 of 48 42" Cutting Deck Assembly 4 683-0254 1 S Deck Adjustment Bracket w/ Weld Nut 9 710-0528 1 /P Hex Cap
More informationPARTS LIST CHAMP 2929
PARTS LIST CHAMP 2929 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT 3 102 9122100 3/8 SPLIT LOCK WASHER 3 103 9121400 3/8 I.D. X 7/8 O.D. X.064/.104 THICK WROUGHT
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 6/2010 Shown with OPTIONAL Grass Collection System 2010 Wright Manufacturing Inc., All Rights
More informationParts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV
Parts Manual for LAWN TRACTORS MANUAL CLUTCH HYDRO DRIVE SERIES F MODELS LT145H33FBV LT145H38FBV ELT145H33FBV IT IS THE POLICY OF SNAPPER TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO
More informationPolar Trac Cab Groundsmaster 7200 Series Mower
Form No. 3408-250 Rev A Polar Trac Cab Groundsmaster 7200 Series Mower Model No. 30474 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3408-250* A Ordering Replacement
More informationParts Manual for the Wright Z
Parts Manual for the Wright Z Serial numbers 40581 & Higher Check www.wrightmfg.com for the latest revision Rev 9/2007 Shown with OPTIONAL Grass Collection System 2006 Wright Manufacturing Inc., All Rights
More informationTWIN ROTARY RAKE PARTS BOOK MODEL
TWIN ROTARY RAKE PARTS BOOK MODEL 2650 17.01135 This parts book is furnished for your convenience only. All parts must be purchased through an authorized dealer. Call us for a dealer near you. Issue Date:
More informationHydrostatic Zero-Turn Commercial Riding Mower
Hydrostatic Zero-Turn Commercial Riding Mower Professional Turf Equipment 0" Fabricated Deck ILLUSTRATED PARTS LIST TABLE OF CONTENTS Frame Assembly.................................. 3 0" Fabricated Cutter
More informationPARTS LIST WRANGLER 26-VS
PARTS LIST WRANGLER 26-VS ELECTRICAL WIRING ITEM PART NO. DESCRIPTION QTY. 1 2694161 UPPER WIRING HARNESS 1 2 2694171 LOWER WIRING HARNESS 1 3 2490811 BRUSH MOTOR WIRE ASSEMBLY 1 4 2396141 WIRE ASSEMBLY
More informationSTX-26 Stump Grinder
Form No. 3365-311 Rev B STX-26 Stump Grinder Model No. 23210 Serial No. 310000001 and Up Model No. 23210G Serial No. 310000001 and Up Register at www.toro.com. Original Instructions (EN) *3365-311* B Ordering
More informationParts Catalog
R Ingersoll Parts Catalog 8-3112 COMPACT TRACTORS WITH VANGUARD ENGINES 3012 - PIN 14145700 AND AFTER 3014 - PIN 14146700 AND AFTER 3016 - PIN 14147800 AND AFTER 3018 - ALL 4016 - PIN 14170800 AND AFTER
More informationPart s Catalog. LX500 Lawn Tractor. Model No. 13AP60RP744. Original Instructions (EN) (01/31/06)
Part s Catalog For Parts Call 0-- or 0-- LX00 Lawn Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) For Parts Call 0-- or 0-- Model P0RP NUMBER --00 Turf Tire, 0 x 0.0 x -000-00 Rim,.0 x.0-0-0
More informationMain Components Early Style
Pipe & Bolt Threading Machine Main Components Early Style * * 0 0 0 0 0 Service Notes: Ref. No.. Do not substitute bolt longer than / inches. Severe damage to Rear Bearing will result. Ref. No.. To assure
More informationPage 1 of HP B&S Vanguard Engine
1405 Page 1 of 41 14 HP B&S Vanguard Engine 1405 Page 2 of 41 14 HP B&S Vanguard Engine Ref # Part Number Qty S/P/F Description BS-28Q777-0647-E1 1 14 HP B&S Vanguard Engine 1 BS-496412 1 Cylinder Assembly
More informationLiftgate Terminology
SL-20 Series SL-20 Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco
More informationHR24TS Rotary Rake. Serial Numbers and higher. Illustrated Parts Breakdown. Guards and Guard Arm, Front Hay Curtain Mount.
HRTS Rotary Rake Serial Numbers 00 and higher Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Page Page Page Page Page Page Page Page Page Page 0 Tongue Front Frame Guards
More informationService Parts 4CCFOZ 4/6.5EFOZ 5CCOZ 5/8EOZ. Marine Generator Sets. Models: TP /05c. Specification Series 126
Service Parts Marine Generator Sets Models: 4CCFOZ 4/6.5EFOZ 5CCOZ 5/8EOZ Specification Series 126 TP-5616 9/05c Description Page Introduction... 3 Numbering System Significance... 3 Illustrations... 3
More informationG190 LT-145 (1992) Page 1 of 27 42" Mower Deck
132-736G190 LT-145 (1992) Page 1 of 27 42" Mower Deck 132-736G190 LT-145 (1992) Page 2 of 27 42" Mower Deck 3 17600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously existing). 813-06119
More informationKMW Parts List
08/ PART NUMBER DESCRIPTION LIST PRICE 0595-3084 Decal Warning $5.28 0595-3001 Decal Warning $1.92 0595-3002 Decal Danger $2.28 0595-3003 Decal Warning $2.16 0595-3004 Decal Warning $2.04 0595-3178 Decal
More informationPart s Catalog. GT2100 Garden Tractor. Model No. 14AP80RP744. Original Instructions (EN) (01/31/06)
Part s Catalog GT0 Garden Tractor Model No. AP0RP Original Instructions (EN) -0 (0//0) Model P0RP -0-00 Turf Tire, x. x -0-00 Rim,.0 x.0-00 Lug Nut, /- -00A-0 Wheel Assembly, x. x -00-00 Rim Assembly,.0
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL VHD SERIES SNOW PLOW WITH SERIAL NUMBERS AFTER VHD00000 and VHD100000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, V-Wing, Revolution
More informationJ1 Plug Pin Identification
D D8 D D D D ART_8 J 8 D D0 R R R R TB 80 D D D D D D J Plug Pin Identification PIN # WIRE # SIGNAL FUNCTION 0 INPUT Drive Reverse INPUT Drive Forward OUTPUT Brake, Decel Valve signal 8 INPUT Steer Left
More information136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck
136R616G190 Lawn Tractor FST-16 (1996) Page 1 of 27 42" Mowing Deck 136R616G190 Lawn Tractor FST-16 (1996) Page 2 of 27 42" Mowing Deck 3 97600A 1 S 42" Deck Ass'y. Code: N notates a new part (not previously
More informationIllustrated Parts Manual
Illustrated Parts Manual Models 522D LoPro 524D LoPro S/N 0900 P/N - 948-403 Revised July 6, 2007 INTRODUCTION Table of Contents SECTION INTRODUCTION Table of Contents... - thru -4 Alphabetical Index...
More information13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor
13A2693G190 LT-165 (2003) Page 1 of 31 Carburetor 13A2693G190 LT-165 (2003) Page 2 of 31 Carburetor TC-640330 1 S Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640035 1 Throttle Shaft & Lever Assembly
More information25-4. Key No. Part No. Description Key No. Part No. Description WASHER,.31X.58X x97 BOLT, CARRIAGE 5/16-18
ENGINE 2 19 23 20 6 25-2 22 27 16 25-5 25-1 25-3 8 22 22 24 5 10 18 24 25-4 12 26 14 25-2 Ref. Drive Page 25-2 3 Ref. Auger Housing Page Key No. Part No. Description Key No. Part No. Description 2 - -
More informationACTUATOR ASSEMBLY EXPLODED VIEW - ALL SERIAL NUMBERS
Distributed by Ergonomic Partners sales@ergonomicpartners.com 314-884-8884 www.ergonomicpartners.com ACTUATOR ASSEMBLY EXPLODED VIEW - ALL SERIAL NUMBERS 1 UNI-B8001677 RIGHT LINKAGE ASSEMBLY 1 2 UNI-B8001678
More informationRC-200EX / RC-150EX Rim Clamp Tire Changer
RC-200EX / RC-150EX Rim Clamp Tire Changer For servicing motorcycle and ATV tire/wheel assemblies as well as automotive and most light truck tire/wheel assemblies (holds 6 to 8-inch wheels for manual tire
More informationM MARCH 2002 Parts Manual Contains:
M-0- MARCH 00 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns LIFT CORP. 9 Slauson Ave. Santa Fe Springs, CA. 900 CUSTOMER SERVICE: TELEPHONE
More informationParts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS. Serial Number B & Higher. Part No.
Parts Manual FRONT-FOLD BOOMS MODELS 80, 90 & 100 HYDRAULIC FOR TA1200 & TA1600 SPRAYERS Serial Number B30970200 & Higher Part No. 408920 Front-Fold Booms 80 / 90 / 100 Introduction Foreward This symbol
More informationPARTS LIST CHAMP 3329 RB
PARTS LIST CHAMP 3329 RB 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT - PACK OF 1 3 102 9122100 3/8 SPLIT LOCK WASHER - PACK OF 10 3 103 9121400 3/8 I.D. X 7/8 O.D.
More informationZ-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler
Z-Force 60 KW 53AA5DBJ Page 1 of 57 Air Filter & Muffler Z-Force 60 KW 53AA5DBJ Page 2 of 57 Air Filter & Muffler Ref # Part Number Qty S/P/F Description 11011 KM-11011-7003 1 S CASE-AIR FILTER 11013 KM-11013-7009
More information24in Stand-On Aerator
Form No. 3417-761 Rev A 24in Stand-On Aerator Model No. 29517 Serial No. 400000000 and Up Register at www.toro.com. Original Instructions (EN) *3417-761* A Ordering Replacement Parts To order replacement
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL HTV SERIES SNOW PLOW FOR SERIAL NUMBERS AFTER HTV0000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade, V-Wing, E-Z Switch,
More informationLime Spreader. Model SL6. Illustrated Parts Breakdown. Front Hydraulics Rear Hydraulics Manifold Components. Spinner Assembly
Lime Spreader Model SL Illustrated Parts Breakdown Page Page Page Page Page Page Page Page Page Page 0 Front End Front Hydraulics Rear Hydraulics Manifold Components Floor & Apron Axle Assembly Apron Drive
More informationSpeedGleam /Plus. 36 Volt Dust Control Burnisher. Operator and Parts Manual
SpeedGleam /Plus 36 Volt Dust Control Burnisher Model No.: 62963 SpeedGleam 62964 SpeedGleam Pac. 62965 SpeedGleam Pac. Can. 62966 SpeedGleam Plus 62967 SpeedGleam Plus Pac. 62968 SpeedGleam Plus Pac.
More informationSpare Parts List. ( , , ) Dominator 500 PSI-13 Gallon
Spare Parts List (1.00-5.0, 1.00-.0, 1.00-9.0) Dominator 500 PSI-13 Gallon From Serial Number (Ref No. 1*) * See Serial Number page or call manufacturer 839900-D 12/05/1 How to Use this Spare Parts List
More informationWRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS
WRANGLER 2016 WHEEL DRIVE, PAD ASSIST & ELECTRIC MODELS BRUSH LIFT 101 9121960 3/8 EXTERNAL STAR LOCK WASHER 1 102 9122030 3/8-16 X 3/4 BUTTON HEAD SOCKET SCREW 1 103 2694261 CABLE 1 104 2391771 90 HOSE
More informationWYS52FX730VCA FOR SERIAL NUMBERS U00681 AND ABOVE
PARTS MANUAL WYS52FX730V WYS52FX730VCA FOR SERIAL NUMBERS 201312U00681 AND ABOVE 2 WORLDLAWN POWER EQUIPMENT, INC. WORLDLAWNPOWEREQUIPMENT.COM 2415 ASHLAND AVE BEATRICE, NE 68310 800-267-4255 FAX 402-223-4103
More informationPARTS MANUAL. HD4SR and 12SR Auto Align Bale Skoop to 2017 K
PARTS MANUAL 1998 to 2017 HD4SR and 12SR Auto Align Bale Skoop K34991-04 Table of Contents Section 1: Parts Breakdown...1-1 Bale Skoop Final Assembly... 1-2 Loader Assembly... 1-4 12SR - Grab Hook Assembly
More informationPARTS LIST WRANGLER 2625 DB
PARTS LIST WRANGLER 2625 DB WITH SIDEKICK CHEMICAL DISPENSOR WITHOUT SIDEKICK CHEMICAL DISPENSOR 1 NOTES 2 BRUSH GEAR MOTOR ITEM PART NO. PART DESCRIPTION QTY. 2393501 COMPLETE MOTOR ASSEMBLY 1 101 3391221
More informationGROUP 3 HYDRAULICS 636 EXTENDO PARTS BOOK
GROUP 3 HYDRAULICS 636 EXTENDO ELECTRICAL SCHEMATIC FOR 636 & 5528, AL-11969... 3-4 ELECTRICAL PLUG-INS SCHEMATIC, BL-10012... 3-7 HYDRAULIC SCHEMATIC, AL-11355... 3-8 HYDRAULIC SCHEMATIC WITH OPTIONAL
More information14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor
14A6816H190 GT-2150 (2003) Page 1 of 28 Carburetor 14A6816H190 GT-2150 (2003) Page 2 of 28 Carburetor TC-640221 1 /P Carburetor (Incl 184 of Engine Parts Lists) 1 TC-640216 1 Throttle Shaft & Lever Assembly
More informationPARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR
PARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR 1 ITEM PART NO. DESCRIPTION QTY. 101 9122300 3/8-16 X 1 1/4 HEX BOLT - PACK OF 2 2 102 9122100 3/8 SPLIT LOCK
More informationREAR ENGINE RIDER 42 MOWER SERIES 22
Parts Manual for REAR ENGINE RIDER MOWER SERIES MODELS 1BVE CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- TIRES... - FRONT END, STEERING.... - MAIN CASE... - DIFFERENTIAL, R. H. FENDER... 8-9
More informationEUROPEAN REAR ENGINE RIDER SERIES 20
Parts Manual for EUROPEAN REAR ENGINE RIDER SERIES 20 MODEL E281320BE E331520KVE McDonough, GA, 30253 U.S.A. Briggs & Startton Yard Power Products Group Copyright 2006 Briggs & Startton Corporation Milwaukee,
More informationWDV Series. WDV Series
WDV Series WDV Series Click the appropriate link below for the major component of the liftgate for which you are trying to find the correct part. If you are unsure of the name of the part in Waltco terminology,
More informationSERVICE PARTS MANUAL
SERVICE PARTS MANUAL MEGABLADE TM V-WING TM SERIES SNOW PLOW WITH SERIAL NUMBERS AFTER MBV00000 Sno-Way, Down Pressure and EIS are registered trademarks of Sno-Way International, Inc. ProControl, MegaBlade,
More informationLitter Spreader. Models SP400, SP450, SP500, SP550. Illustrated Parts Breakdown
Litter Spreader Models SP00, SP0, SP00, SP0 Illustrated Parts Breakdown Page Front End Page Hydraulic System (w/ Side Mounted Reservoir) Page Hydraulic System (w/ Front Mounted Reservoir) Page Hydraulic
More informationPARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR
PARTS LIST CHAMP 2929 WITHOUT SIDEKICK CHEMICAL DISPENSOR WITH SIDEKICK CHEMICAL DISPENSOR 1 ITEM PART NO. DESCRIPTION QTY. 101 9122343 3/8-16 X 2 HEX HEAD FULL THREADED BOLT - PACK OF 1 3 102 9122100
More informationM REV. K SEPTEMBER Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns
M-07- REV. K SEPTEMBER 03 Parts Manual Contains: Warranty Information Warnings Parts Ordering Information Exploded View Parts Breakdowns MAXON Lift Corp. 03 LIFT CORP. 9 Slauson Ave. Santa Fe Springs,
More informationPARTS LIST WRANGLER 2016 AE, AB, DB
PARTS LIST WRANGLER 2016 AE, AB, DB 1 ITEM PART NO. DESCRIPTION QTY. 101 2397081 MOTOR HOUSING 1 102 9120790 10 X 5/8 PAN HEAD PHILLIPS SHEET METAL SCREW [PACK OF 10] 4 103 2397991 WATER SOLENOID 24 VOLT
More informationParts Catalog. Mixer SP20. Model:
, 07 99556 ECN 9 Parts Catalog Mixer SP0 Model: SP0 0/8/7 Rev. - IMPORTANT! TO EXPEDITE SHIPMENT OF PARTS, ALWAYS SPECIFY MODEL, REV, PART NUMBER, AND SERIAL NUMBER OF UNIT. GLOBE FOOD EQUIPMENT COMPANY
More informationPARTS CATALOG FOR. Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS
PARTS CATALOG FOR Mud Hog System II & System III 2-Speed Rear Wheel Drive FOR JOHN DEERE 9960, 9965 & 9970 COTTON PICKERS Mud Hog Model Numbers Tread Center MH System 9960 9965 & 9970 JD47601 JD47651 82-90
More information